From 82d56e6d2e616bee0e712330bad06b634f007a46 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Fri, 27 Jan 2006 19:15:02 +0100 Subject: [PATCH] pcmcia: properly handle pseudo multi-function devices The second pseudo multi-function device of a PCMCIA card may only be configured once the first one is initialized. Therefore, delay the registration of the second device until the first one is initialized. Signed-off-by: Dominik Brodowski pcmcia_state.device_add_pending) { + s->pcmcia_state.device_add_pending = 1; + schedule_work(&s->device_add); + } + return; +} static int pcmcia_device_probe(struct device * dev) { struct pcmcia_device *p_dev; struct pcmcia_driver *p_drv; + struct pcmcia_device_id *did; struct pcmcia_socket *s; int ret = 0; @@ -392,6 +401,19 @@ static int pcmcia_device_probe(struct device * dev) } ret = p_drv->probe(p_dev); + if (ret) + goto put_module; + + /* handle pseudo multifunction devices: + * there are at most two pseudo multifunction devices. + * if we're matching against the first, schedule a + * call which will then check whether there are two + * pseudo devices, and if not, add the second one. + */ + did = (struct pcmcia_device_id *) p_dev->dev.driver_data; + if ((did->match_flags & PCMCIA_DEV_ID_MATCH_DEVICE_NO) && + (p_dev->socket->device_count == 1) && (p_dev->device_no == 0)) + pcmcia_add_pseudo_device(p_dev->socket); put_module: if (ret) @@ -660,15 +682,6 @@ static void pcmcia_delayed_add_pseudo_device(void *data) s->pcmcia_state.device_add_pending = 0; } -static inline void pcmcia_add_pseudo_device(struct pcmcia_socket *s) -{ - if (!s->pcmcia_state.device_add_pending) { - s->pcmcia_state.device_add_pending = 1; - schedule_work(&s->device_add); - } - return; -} - static int pcmcia_requery(struct device *dev, void * _data) { struct pcmcia_device *p_dev = to_pcmcia_dev(dev); @@ -755,15 +768,6 @@ static inline int pcmcia_devmatch(struct pcmcia_device *dev, } if (did->match_flags & PCMCIA_DEV_ID_MATCH_DEVICE_NO) { - /* handle pseudo multifunction devices: - * there are at most two pseudo multifunction devices. - * if we're matching against the first, schedule a - * call which will then check whether there are two - * pseudo devices, and if not, add the second one. - */ - if (dev->device_no == 0) - pcmcia_add_pseudo_device(dev->socket); - if (dev->device_no != did->device_no) return 0; } -- cgit v1.2.3 From 42935656914b813c99f91cbac421fe677a6f34ab Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 25 Jan 2006 06:36:32 -0800 Subject: [PATCH] pcmcia: add another ide-cs CF card id Add another CF card ID. Signed-off-by: David Brownell Signed-off-by: Dominik Brodowski --- drivers/ide/legacy/ide-cs.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index 4c2af9020905..6213bd3caee5 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -445,6 +445,7 @@ static struct pcmcia_device_id ide_ids[] = { PCMCIA_DEVICE_PROD_ID12("PCMCIA", "PnPIDE", 0x281f1c5d, 0x0c694728), PCMCIA_DEVICE_PROD_ID12("SHUTTLE TECHNOLOGY LTD.", "PCCARD-IDE/ATAPI Adapter", 0x4a3f0ba0, 0x322560e1), PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003), + PCMCIA_DEVICE_PROD_ID1("TRANSCEND 512M ", 0xd0909443), PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852), PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209), PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e), -- cgit v1.2.3 From 40e3cad61197fce63853e778db020f7637d988f2 Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Tue, 28 Feb 2006 01:18:31 -0500 Subject: [PATCH] pcmcia: avoid binding hostap_cs to Orinoco cards Don't just use cards with PCMCIA ID 0x0156, 0x0002. Make sure that the vendor string is "Intersil" or "INTERSIL" Signed-off-by: Pavel Roskin Signed-off-by: Dominik Brodowski --- drivers/net/wireless/hostap/hostap_cs.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index 8bc0b528548f..f8f4503475f9 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -877,7 +877,6 @@ static struct pcmcia_device_id hostap_cs_ids[] = { PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000), PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), - PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), PCMCIA_DEVICE_MANF_CARD(0x026f, 0x030b), PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), @@ -891,6 +890,10 @@ static struct pcmcia_device_id hostap_cs_ids[] = { PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002), PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005), PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0010), + PCMCIA_DEVICE_MANF_CARD_PROD_ID1(0x0156, 0x0002, "INTERSIL", + 0x74c5e40d), + PCMCIA_DEVICE_MANF_CARD_PROD_ID1(0x0156, 0x0002, "Intersil", + 0x4b801a17), PCMCIA_MFC_DEVICE_PROD_ID12(0, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6), PCMCIA_DEVICE_PROD_ID1234( -- cgit v1.2.3 From 2fe22a8bba0c3a60db58dfdcaa200f8528c057e4 Mon Sep 17 00:00:00 2001 From: Jesse Allen Date: Mon, 20 Feb 2006 22:08:18 -0800 Subject: [PATCH] pcmcia: add id for AMB8110 PC Card The axnet_cs driver can support the AMB8110 PC Card, so add the id for it. In the old pcmcia-cs config file, this card is listed with the comment "not specific enough". The last entry in the axnet_ids has the same comment. They are disabled, and for good reason as it was originally identified by the MANFID, and that is shared with several cards that use both the pcnet_cs driver and axnet_cs driver. I tried my AMB8110 with pcnet_cs, and found that it works fine, and I cannot find a reason for either, except that the old config file recommended axnet_cs. Signed-off-by: Jesse Allen Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Dominik Brodowski --- drivers/net/pcmcia/axnet_cs.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index 01ddfc8cce3f..aa5581369399 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -806,6 +806,7 @@ static struct pcmcia_device_id axnet_ids[] = { PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0309), PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1106), PCMCIA_DEVICE_MANF_CARD(0x8a01, 0xc1ab), + PCMCIA_DEVICE_PROD_ID12("AmbiCom,Inc.", "Fast Ethernet PC Card(AMB8110)", 0x49b020a7, 0x119cc9fc), PCMCIA_DEVICE_PROD_ID124("Fast Ethernet", "16-bit PC Card", "AX88190", 0xb4be14e3, 0x9a12eb6a, 0xab9be5ef), PCMCIA_DEVICE_PROD_ID12("ASIX", "AX88190", 0x0959823b, 0xab9be5ef), PCMCIA_DEVICE_PROD_ID12("Billionton", "LNA-100B", 0x552ab682, 0xbc3b87e1), -- cgit v1.2.3 From 67bc620006a30cf5dcbf409dbbd4fd93179ddfb1 Mon Sep 17 00:00:00 2001 From: Harald Welte Date: Tue, 14 Feb 2006 09:21:26 +0100 Subject: [PATCH] pcmcia: CM4000, CM4040 Driver fixes Using this patch, Omnikey CardMan 4000 and 4040 devices automatically get their device nodes created by udev. Also, we now check for (and handle) failure of pcmcia_register_driver() Signed-off-by: Harald Welte Signed-off-by: Dominik Brodowski --- drivers/char/pcmcia/cm4000_cs.c | 24 +++++++++++++++++++++--- drivers/char/pcmcia/cm4040_cs.c | 23 ++++++++++++++++++++--- 2 files changed, 41 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c index 649677b5dc36..5fdf18515433 100644 --- a/drivers/char/pcmcia/cm4000_cs.c +++ b/drivers/char/pcmcia/cm4000_cs.c @@ -13,11 +13,12 @@ * * (C) 2000,2001,2002,2003,2004 Omnikey AG * - * (C) 2005 Harald Welte + * (C) 2005-2006 Harald Welte * - Adhere to Kernel CodingStyle * - Port to 2.6.13 "new" style PCMCIA * - Check for copy_{from,to}_user return values * - Use nonseekable_open() + * - add class interface for udev device creation * * All rights reserved. Licensed under dual BSD/GPL license. */ @@ -56,7 +57,7 @@ module_param(pc_debug, int, 0600); #else #define DEBUGP(n, rdr, x, args...) #endif -static char *version = "cm4000_cs.c v2.4.0gm5 - All bugs added by Harald Welte"; +static char *version = "cm4000_cs.c v2.4.0gm6 - All bugs added by Harald Welte"; #define T_1SEC (HZ) #define T_10MSEC msecs_to_jiffies(10) @@ -156,6 +157,7 @@ struct cm4000_dev { /*queue*/ 4*sizeof(wait_queue_head_t)) static dev_link_t *dev_table[CM4000_MAX_DEV]; +static struct class *cmm_class; /* This table doesn't use spaces after the comma between fields and thus * violates CodingStyle. However, I don't really think wrapping it around will @@ -1937,6 +1939,9 @@ static int cm4000_attach(struct pcmcia_device *p_dev) link->state |= DEV_PRESENT | DEV_CONFIG_PENDING; cm4000_config(link, i); + class_device_create(cmm_class, NULL, MKDEV(major, i), NULL, + "cmm%d", i); + return 0; } @@ -1962,6 +1967,8 @@ static void cm4000_detach(struct pcmcia_device *p_dev) dev_table[devno] = NULL; kfree(dev); + class_device_destroy(cmm_class, MKDEV(major, devno)); + return; } @@ -1995,8 +2002,18 @@ static struct pcmcia_driver cm4000_driver = { static int __init cmm_init(void) { + int rc; + printk(KERN_INFO "%s\n", version); - pcmcia_register_driver(&cm4000_driver); + + cmm_class = class_create(THIS_MODULE, "cardman_4000"); + if (!cmm_class) + return -1; + + rc = pcmcia_register_driver(&cm4000_driver); + if (rc < 0) + return rc; + major = register_chrdev(0, DEVICE_NAME, &cm4000_fops); if (major < 0) { printk(KERN_WARNING MODULE_NAME @@ -2012,6 +2029,7 @@ static void __exit cmm_exit(void) printk(KERN_INFO MODULE_NAME ": unloading\n"); pcmcia_unregister_driver(&cm4000_driver); unregister_chrdev(major, DEVICE_NAME); + class_destroy(cmm_class); }; module_init(cmm_init); diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c index 46eb371bf17e..466e33bab029 100644 --- a/drivers/char/pcmcia/cm4040_cs.c +++ b/drivers/char/pcmcia/cm4040_cs.c @@ -3,12 +3,13 @@ * * (c) 2000-2004 Omnikey AG (http://www.omnikey.com/) * - * (C) 2005 Harald Welte + * (C) 2005-2006 Harald Welte * - add support for poll() * - driver cleanup * - add waitqueues * - adhere to linux kernel coding style and policies * - support 2.6.13 "new style" pcmcia interface + * - add class interface for udev device creation * * The device basically is a USB CCID compliant device that has been * attached to an I/O-Mapped FIFO. @@ -53,7 +54,7 @@ module_param(pc_debug, int, 0600); #endif static char *version = -"OMNIKEY CardMan 4040 v1.1.0gm4 - All bugs added by Harald Welte"; +"OMNIKEY CardMan 4040 v1.1.0gm5 - All bugs added by Harald Welte"; #define CCID_DRIVER_BULK_DEFAULT_TIMEOUT (150*HZ) #define CCID_DRIVER_ASYNC_POWERUP_TIMEOUT (35*HZ) @@ -67,6 +68,7 @@ static char *version = static void reader_release(dev_link_t *link); static int major; +static struct class *cmx_class; #define BS_READABLE 0x01 #define BS_WRITABLE 0x02 @@ -696,6 +698,9 @@ static int reader_attach(struct pcmcia_device *p_dev) link->state |= DEV_PRESENT | DEV_CONFIG_PENDING; reader_config(link, i); + class_device_create(cmx_class, NULL, MKDEV(major, i), NULL, + "cmx%d", i); + return 0; } @@ -721,6 +726,8 @@ static void reader_detach(struct pcmcia_device *p_dev) dev_table[devno] = NULL; kfree(dev); + class_device_destroy(cmx_class, MKDEV(major, devno)); + return; } @@ -755,8 +762,17 @@ static struct pcmcia_driver reader_driver = { static int __init cm4040_init(void) { + int rc; + printk(KERN_INFO "%s\n", version); - pcmcia_register_driver(&reader_driver); + cmx_class = class_create(THIS_MODULE, "cardman_4040"); + if (!cmx_class) + return -1; + + rc = pcmcia_register_driver(&reader_driver); + if (rc < 0) + return rc; + major = register_chrdev(0, DEVICE_NAME, &reader_fops); if (major < 0) { printk(KERN_WARNING MODULE_NAME @@ -771,6 +787,7 @@ static void __exit cm4040_exit(void) printk(KERN_INFO MODULE_NAME ": unloading\n"); pcmcia_unregister_driver(&reader_driver); unregister_chrdev(major, DEVICE_NAME); + class_destroy(cmx_class); } module_init(cm4040_init); -- cgit v1.2.3