From 4364bcb2cd21d042bde4776448417ddffbc54045 Mon Sep 17 00:00:00 2001 From: Leo Li Date: Mon, 15 Oct 2018 09:46:40 -0400 Subject: drm: Get ref on CRTC commit object when waiting for flip_done This fixes a general protection fault, caused by accessing the contents of a flip_done completion object that has already been freed. It occurs due to the preemption of a non-blocking commit worker thread W by another commit thread X. X continues to clear its atomic state at the end, destroying the CRTC commit object that W still needs. Switching back to W and accessing the commit objects then leads to bad results. Worker W becomes preemptable when waiting for flip_done to complete. At this point, a frequently occurring commit thread X can take over. Here's an example where W is a worker thread that flips on both CRTCs, and X does a legacy cursor update on both CRTCs: ... 1. W does flip work 2. W runs commit_hw_done() 3. W waits for flip_done on CRTC 1 4. > flip_done for CRTC 1 completes 5. W finishes waiting for CRTC 1 6. W waits for flip_done on CRTC 2 7. > Preempted by X 8. > flip_done for CRTC 2 completes 9. X atomic_check: hw_done and flip_done are complete on all CRTCs 10. X updates cursor on both CRTCs 11. X destroys atomic state 12. X done 13. > Switch back to W 14. W waits for flip_done on CRTC 2 15. W raises general protection fault The error looks like so: general protection fault: 0000 [#1] PREEMPT SMP PTI **snip** Call Trace: lock_acquire+0xa2/0x1b0 _raw_spin_lock_irq+0x39/0x70 wait_for_completion_timeout+0x31/0x130 drm_atomic_helper_wait_for_flip_done+0x64/0x90 [drm_kms_helper] amdgpu_dm_atomic_commit_tail+0xcae/0xdd0 [amdgpu] commit_tail+0x3d/0x70 [drm_kms_helper] process_one_work+0x212/0x650 worker_thread+0x49/0x420 kthread+0xfb/0x130 ret_from_fork+0x3a/0x50 Modules linked in: x86_pkg_temp_thermal amdgpu(O) chash(O) gpu_sched(O) drm_kms_helper(O) syscopyarea sysfillrect sysimgblt fb_sys_fops ttm(O) drm(O) Note that i915 has this issue masked, since hw_done is signaled after waiting for flip_done. Doing so will block the cursor update from happening until hw_done is signaled, preventing the cursor commit from destroying the state. v2: The reference on the commit object needs to be obtained before hw_done() is signaled, since that's the point where another commit is allowed to modify the state. Assuming that the new_crtc_state->commit object still exists within flip_done() is incorrect. Fix by getting a reference in setup_commit(), and releasing it during default_clear(). Signed-off-by: Leo Li Reviewed-by: Daniel Vetter Signed-off-by: Harry Wentland Link: https://patchwork.freedesktop.org/patch/msgid/1539611200-6184-1-git-send-email-sunpeng.li@amd.com --- drivers/gpu/drm/drm_atomic.c | 5 +++++ drivers/gpu/drm/drm_atomic_helper.c | 12 ++++++++---- 2 files changed, 13 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c index 018fcdb353d2..281cf9cbb44c 100644 --- a/drivers/gpu/drm/drm_atomic.c +++ b/drivers/gpu/drm/drm_atomic.c @@ -174,6 +174,11 @@ void drm_atomic_state_default_clear(struct drm_atomic_state *state) state->crtcs[i].state = NULL; state->crtcs[i].old_state = NULL; state->crtcs[i].new_state = NULL; + + if (state->crtcs[i].commit) { + drm_crtc_commit_put(state->crtcs[i].commit); + state->crtcs[i].commit = NULL; + } } for (i = 0; i < config->num_total_plane; i++) { diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c index 80be74df7ba6..1bb4c318bdd4 100644 --- a/drivers/gpu/drm/drm_atomic_helper.c +++ b/drivers/gpu/drm/drm_atomic_helper.c @@ -1408,15 +1408,16 @@ EXPORT_SYMBOL(drm_atomic_helper_wait_for_vblanks); void drm_atomic_helper_wait_for_flip_done(struct drm_device *dev, struct drm_atomic_state *old_state) { - struct drm_crtc_state *new_crtc_state; struct drm_crtc *crtc; int i; - for_each_new_crtc_in_state(old_state, crtc, new_crtc_state, i) { - struct drm_crtc_commit *commit = new_crtc_state->commit; + for (i = 0; i < dev->mode_config.num_crtc; i++) { + struct drm_crtc_commit *commit = old_state->crtcs[i].commit; int ret; - if (!commit) + crtc = old_state->crtcs[i].ptr; + + if (!crtc || !commit) continue; ret = wait_for_completion_timeout(&commit->flip_done, 10 * HZ); @@ -1934,6 +1935,9 @@ int drm_atomic_helper_setup_commit(struct drm_atomic_state *state, drm_crtc_commit_get(commit); commit->abort_completion = true; + + state->crtcs[i].commit = commit; + drm_crtc_commit_get(commit); } for_each_oldnew_connector_in_state(state, conn, old_conn_state, new_conn_state, i) { -- cgit v1.2.3 From e84cb605e02f1b3d0aee8d7157419cd8aaa06038 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Thu, 18 Oct 2018 12:02:50 +0200 Subject: drm/sun4i: Fix an ulong overflow in the dotclock driver The calculated ideal rate can easily overflow an unsigned long, thus making the best div selection buggy as soon as no ideal match is found before the overflow occurs. Fixes: 4731a72df273 ("drm/sun4i: request exact rates to our parents") Cc: Signed-off-by: Boris Brezillon Acked-by: Maxime Ripard Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20181018100250.12565-1-boris.brezillon@bootlin.com --- drivers/gpu/drm/sun4i/sun4i_dotclock.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/sun4i/sun4i_dotclock.c b/drivers/gpu/drm/sun4i/sun4i_dotclock.c index e36004fbe453..2a15f2f9271e 100644 --- a/drivers/gpu/drm/sun4i/sun4i_dotclock.c +++ b/drivers/gpu/drm/sun4i/sun4i_dotclock.c @@ -81,9 +81,19 @@ static long sun4i_dclk_round_rate(struct clk_hw *hw, unsigned long rate, int i; for (i = tcon->dclk_min_div; i <= tcon->dclk_max_div; i++) { - unsigned long ideal = rate * i; + u64 ideal = (u64)rate * i; unsigned long rounded; + /* + * ideal has overflowed the max value that can be stored in an + * unsigned long, and every clk operation we might do on a + * truncated u64 value will give us incorrect results. + * Let's just stop there since bigger dividers will result in + * the same overflow issue. + */ + if (ideal > ULONG_MAX) + goto out; + rounded = clk_hw_round_rate(clk_hw_get_parent(hw), ideal); -- cgit v1.2.3