From 7482d6ecc68e16a2b8272b0c9cbcc5c50edf013f Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Tue, 11 Dec 2018 15:56:41 +0000 Subject: regulator: act8945a-regulator: Implement PM functionalities The regulator supports a dedicated suspend mode. Implement the appropriate ->set_suspend_xx() hooks, add support for ->set_mode(), and provide basic PM ops functionalities to setup the regulator in a suspend state when the system is entering suspend. Signed-off-by: Boris Brezillon [claudiu.beznea@microchip.com: remove shutdown function, use dev_pm_ops, fix checkpatch warning, adapt commit message, add LDO modes support, move modes constants to active-semi,8945a-regulator.h, remove rdevs from struct act8945a_pmic, add op_mode to act8945a_pmic] Signed-off-by: Claudiu Beznea Signed-off-by: Mark Brown --- .../regulator/active-semi,8945a-regulator.h | 30 ++++++++++++++++++++++ 1 file changed, 30 insertions(+) create mode 100644 include/dt-bindings/regulator/active-semi,8945a-regulator.h (limited to 'include/dt-bindings/regulator') diff --git a/include/dt-bindings/regulator/active-semi,8945a-regulator.h b/include/dt-bindings/regulator/active-semi,8945a-regulator.h new file mode 100644 index 000000000000..9bdba5e3141a --- /dev/null +++ b/include/dt-bindings/regulator/active-semi,8945a-regulator.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2018 Microchip Technology, Inc. All rights reserved. + * + * Device Tree binding constants for the ACT8945A PMIC regulators + */ + +#ifndef _DT_BINDINGS_REGULATOR_ACT8945A_H +#define _DT_BINDINGS_REGULATOR_ACT8945A_H + +/* + * These constants should be used to specify regulator modes in device tree for + * ACT8945A regulators as follows: + * ACT8945A_REGULATOR_MODE_FIXED: It is specific to DCDC regulators and it + * specifies the usage of fixed-frequency + * PWM. + * + * ACT8945A_REGULATOR_MODE_NORMAL: It is specific to LDO regulators and it + * specifies the usage of normal mode. + * + * ACT8945A_REGULATOR_MODE_LOWPOWER: For DCDC and LDO regulators; it specify + * the usage of proprietary power-saving + * mode. + */ + +#define ACT8945A_REGULATOR_MODE_FIXED 1 +#define ACT8945A_REGULATOR_MODE_NORMAL 2 +#define ACT8945A_REGULATOR_MODE_LOWPOWER 3 + +#endif -- cgit v1.2.3