From 61fbb1d278cf09f29d67629b139b3ca08acbf177 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Wed, 19 Feb 2014 09:25:49 +0900 Subject: clk: samsung: add clock-driver for s3c2416, s3c2443 and s3c2450 The three SoCs share a common clock tree which only differs in the existence of some special clocks. As with all parts common to these three SoCs the driver is named after the s3c2443, as it was the first SoC introducing this structure and there exists no other label to describe this s3c24xx epoch. The clock structure is built according to the manuals of the included SoCs and might include changes in comparison to the previous clock structure. As an example the sclk_uart gate was never handled previously and the div_uart was made to be the clock used by the serial driver. Signed-off-by: Heiko Stuebner Acked-by: Tomasz Figa Signed-off-by: Kukjin Kim --- include/dt-bindings/clock/s3c2443.h | 92 +++++++++++++++++++++++++++++++++++++ 1 file changed, 92 insertions(+) create mode 100644 include/dt-bindings/clock/s3c2443.h (limited to 'include/dt-bindings') diff --git a/include/dt-bindings/clock/s3c2443.h b/include/dt-bindings/clock/s3c2443.h new file mode 100644 index 000000000000..37e66b054d64 --- /dev/null +++ b/include/dt-bindings/clock/s3c2443.h @@ -0,0 +1,92 @@ +/* + * Copyright (c) 2013 Heiko Stuebner + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Device Tree binding constants clock controllers of Samsung S3C2443 and later. + */ + +#ifndef _DT_BINDINGS_CLOCK_SAMSUNG_S3C2443_CLOCK_H +#define _DT_BINDINGS_CLOCK_SAMSUNG_S3C2443_CLOCK_H + +/* + * Let each exported clock get a unique index, which is used on DT-enabled + * platforms to lookup the clock from a clock specifier. These indices are + * therefore considered an ABI and so must not be changed. This implies + * that new clocks should be added either in free spaces between clock groups + * or at the end. + */ + +/* Core clocks. */ +#define MSYSCLK 1 +#define ESYSCLK 2 +#define ARMDIV 3 +#define ARMCLK 4 +#define HCLK 5 +#define PCLK 6 + +/* Special clocks */ +#define SCLK_HSSPI0 16 +#define SCLK_FIMD 17 +#define SCLK_I2S0 18 +#define SCLK_I2S1 19 +#define SCLK_HSMMC1 20 +#define SCLK_HSMMC_EXT 21 +#define SCLK_CAM 22 +#define SCLK_UART 23 +#define SCLK_USBH 24 + +/* Muxes */ +#define MUX_HSSPI0 32 +#define MUX_HSSPI1 33 +#define MUX_HSMMC0 34 +#define MUX_HSMMC1 35 + +/* hclk-gates */ +#define HCLK_DMA0 48 +#define HCLK_DMA1 49 +#define HCLK_DMA2 50 +#define HCLK_DMA3 51 +#define HCLK_DMA4 52 +#define HCLK_DMA5 53 +#define HCLK_DMA6 54 +#define HCLK_DMA7 55 +#define HCLK_CAM 56 +#define HCLK_LCD 57 +#define HCLK_USBH 58 +#define HCLK_USBD 59 +#define HCLK_IROM 60 +#define HCLK_HSMMC0 61 +#define HCLK_HSMMC1 62 +#define HCLK_CFC 63 +#define HCLK_SSMC 64 +#define HCLK_DRAM 65 +#define HCLK_2D 66 + +/* pclk-gates */ +#define PCLK_UART0 72 +#define PCLK_UART1 73 +#define PCLK_UART2 74 +#define PCLK_UART3 75 +#define PCLK_I2C0 76 +#define PCLK_SDI 77 +#define PCLK_SPI0 78 +#define PCLK_ADC 79 +#define PCLK_AC97 80 +#define PCLK_I2S0 81 +#define PCLK_PWM 82 +#define PCLK_WDT 83 +#define PCLK_RTC 84 +#define PCLK_GPIO 85 +#define PCLK_SPI1 86 +#define PCLK_CHIPID 87 +#define PCLK_I2C1 88 +#define PCLK_I2S1 89 +#define PCLK_PCM 90 + +/* Total number of clocks. */ +#define NR_CLKS (PCLK_PCM + 1) + +#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_S3C2443_CLOCK_H */ -- cgit v1.2.3 From ca2e90ac1809c49c2306df4e23e17dad67c785b6 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Tue, 25 Feb 2014 09:50:44 +0900 Subject: clk: samsung: add clock controller driver for s3c2412 This driver can handle the clock controller in the s3c2412 soc. The clock structure is built according to the manuals of the included SoCs and might include changes in comparison to the previous clock structure. Signed-off-by: Heiko Stuebner Reviewed-by: Tomasz Figa Acked-by: Mike Turquette Signed-off-by: Kukjin Kim --- drivers/clk/samsung/Makefile | 1 + drivers/clk/samsung/clk-s3c2412.c | 269 ++++++++++++++++++++++++++++++++++++ include/dt-bindings/clock/s3c2412.h | 73 ++++++++++ 3 files changed, 343 insertions(+) create mode 100644 drivers/clk/samsung/clk-s3c2412.c create mode 100644 include/dt-bindings/clock/s3c2412.h (limited to 'include/dt-bindings') diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile index 4c892c63a8dd..77313e27bc39 100644 --- a/drivers/clk/samsung/Makefile +++ b/drivers/clk/samsung/Makefile @@ -8,5 +8,6 @@ obj-$(CONFIG_SOC_EXYNOS5250) += clk-exynos5250.o obj-$(CONFIG_SOC_EXYNOS5420) += clk-exynos5420.o obj-$(CONFIG_SOC_EXYNOS5440) += clk-exynos5440.o obj-$(CONFIG_ARCH_EXYNOS) += clk-exynos-audss.o +obj-$(CONFIG_S3C2412_COMMON_CLK)+= clk-s3c2412.o obj-$(CONFIG_S3C2443_COMMON_CLK)+= clk-s3c2443.o obj-$(CONFIG_ARCH_S3C64XX) += clk-s3c64xx.o diff --git a/drivers/clk/samsung/clk-s3c2412.c b/drivers/clk/samsung/clk-s3c2412.c new file mode 100644 index 000000000000..0f11a07d5c01 --- /dev/null +++ b/drivers/clk/samsung/clk-s3c2412.c @@ -0,0 +1,269 @@ +/* + * Copyright (c) 2013 Heiko Stuebner + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Common Clock Framework support for S3C2412 and S3C2413. + */ + +#include +#include +#include +#include +#include +#include + +#include + +#include "clk.h" +#include "clk-pll.h" + +#define LOCKTIME 0x00 +#define MPLLCON 0x04 +#define UPLLCON 0x08 +#define CLKCON 0x0c +#define CLKDIVN 0x14 +#define CLKSRC 0x1c + +/* list of PLLs to be registered */ +enum s3c2412_plls { + mpll, upll, +}; + +static void __iomem *reg_base; + +#ifdef CONFIG_PM_SLEEP +static struct samsung_clk_reg_dump *s3c2412_save; + +/* + * list of controller registers to be saved and restored during a + * suspend/resume cycle. + */ +static unsigned long s3c2412_clk_regs[] __initdata = { + LOCKTIME, + MPLLCON, + UPLLCON, + CLKCON, + CLKDIVN, + CLKSRC, +}; + +static int s3c2412_clk_suspend(void) +{ + samsung_clk_save(reg_base, s3c2412_save, + ARRAY_SIZE(s3c2412_clk_regs)); + + return 0; +} + +static void s3c2412_clk_resume(void) +{ + samsung_clk_restore(reg_base, s3c2412_save, + ARRAY_SIZE(s3c2412_clk_regs)); +} + +static struct syscore_ops s3c2412_clk_syscore_ops = { + .suspend = s3c2412_clk_suspend, + .resume = s3c2412_clk_resume, +}; + +static void s3c2412_clk_sleep_init(void) +{ + s3c2412_save = samsung_clk_alloc_reg_dump(s3c2412_clk_regs, + ARRAY_SIZE(s3c2412_clk_regs)); + if (!s3c2412_save) { + pr_warn("%s: failed to allocate sleep save data, no sleep support!\n", + __func__); + return; + } + + register_syscore_ops(&s3c2412_clk_syscore_ops); + return; +} +#else +static void s3c2412_clk_sleep_init(void) {} +#endif + +static struct clk_div_table divxti_d[] = { + { .val = 0, .div = 1 }, + { .val = 1, .div = 2 }, + { .val = 2, .div = 4 }, + { .val = 3, .div = 6 }, + { .val = 4, .div = 8 }, + { .val = 5, .div = 10 }, + { .val = 6, .div = 12 }, + { .val = 7, .div = 14 }, + { /* sentinel */ }, +}; + +struct samsung_div_clock s3c2412_dividers[] __initdata = { + DIV_T(0, "div_xti", "xti", CLKSRC, 0, 3, divxti_d), + DIV(0, "div_cam", "mux_cam", CLKDIVN, 16, 4), + DIV(0, "div_i2s", "mux_i2s", CLKDIVN, 12, 4), + DIV(0, "div_uart", "mux_uart", CLKDIVN, 8, 4), + DIV(0, "div_usb", "mux_usb", CLKDIVN, 6, 1), + DIV(0, "div_hclk_half", "hclk", CLKDIVN, 5, 1), + DIV(ARMDIV, "armdiv", "msysclk", CLKDIVN, 3, 1), + DIV(PCLK, "pclk", "hclk", CLKDIVN, 2, 1), + DIV(HCLK, "hclk", "armdiv", CLKDIVN, 0, 2), +}; + +struct samsung_fixed_factor_clock s3c2412_ffactor[] __initdata = { + FFACTOR(0, "ff_hclk", "hclk", 2, 1, CLK_SET_RATE_PARENT), +}; + +/* + * The first two use the OM[4] setting, which is not readable from + * software, so assume it is set to xti. + */ +PNAME(erefclk_p) = { "xti", "xti", "xti", "ext" }; +PNAME(urefclk_p) = { "xti", "xti", "xti", "ext" }; + +PNAME(camclk_p) = { "usysclk", "hclk" }; +PNAME(usbclk_p) = { "usysclk", "hclk" }; +PNAME(i2sclk_p) = { "erefclk", "mpll" }; +PNAME(uartclk_p) = { "erefclk", "mpll" }; +PNAME(usysclk_p) = { "urefclk", "upll" }; +PNAME(msysclk_p) = { "mdivclk", "mpll" }; +PNAME(mdivclk_p) = { "xti", "div_xti" }; +PNAME(armclk_p) = { "armdiv", "hclk" }; + +struct samsung_mux_clock s3c2412_muxes[] __initdata = { + MUX(0, "erefclk", erefclk_p, CLKSRC, 14, 2), + MUX(0, "urefclk", urefclk_p, CLKSRC, 12, 2), + MUX(0, "mux_cam", camclk_p, CLKSRC, 11, 1), + MUX(0, "mux_usb", usbclk_p, CLKSRC, 10, 1), + MUX(0, "mux_i2s", i2sclk_p, CLKSRC, 9, 1), + MUX(0, "mux_uart", uartclk_p, CLKSRC, 8, 1), + MUX(USYSCLK, "usysclk", usysclk_p, CLKSRC, 5, 1), + MUX(MSYSCLK, "msysclk", msysclk_p, CLKSRC, 4, 1), + MUX(MDIVCLK, "mdivclk", mdivclk_p, CLKSRC, 3, 1), + MUX(ARMCLK, "armclk", armclk_p, CLKDIVN, 4, 1), +}; + +static struct samsung_pll_clock s3c2412_plls[] __initdata = { + [mpll] = PLL(pll_s3c2440_mpll, MPLL, "mpll", "xti", + LOCKTIME, MPLLCON, NULL), + [upll] = PLL(pll_s3c2410_upll, UPLL, "upll", "urefclk", + LOCKTIME, UPLLCON, NULL), +}; + +struct samsung_gate_clock s3c2412_gates[] __initdata = { + GATE(PCLK_WDT, "wdt", "pclk", CLKCON, 28, 0, 0), + GATE(PCLK_SPI, "spi", "pclk", CLKCON, 27, 0, 0), + GATE(PCLK_I2S, "i2s", "pclk", CLKCON, 26, 0, 0), + GATE(PCLK_I2C, "i2c", "pclk", CLKCON, 25, 0, 0), + GATE(PCLK_ADC, "adc", "pclk", CLKCON, 24, 0, 0), + GATE(PCLK_RTC, "rtc", "pclk", CLKCON, 23, 0, 0), + GATE(PCLK_GPIO, "gpio", "pclk", CLKCON, 22, CLK_IGNORE_UNUSED, 0), + GATE(PCLK_UART2, "uart2", "pclk", CLKCON, 21, 0, 0), + GATE(PCLK_UART1, "uart1", "pclk", CLKCON, 20, 0, 0), + GATE(PCLK_UART0, "uart0", "pclk", CLKCON, 19, 0, 0), + GATE(PCLK_SDI, "sdi", "pclk", CLKCON, 18, 0, 0), + GATE(PCLK_PWM, "pwm", "pclk", CLKCON, 17, 0, 0), + GATE(PCLK_USBD, "usb-device", "pclk", CLKCON, 16, 0, 0), + GATE(SCLK_CAM, "sclk_cam", "div_cam", CLKCON, 15, 0, 0), + GATE(SCLK_UART, "sclk_uart", "div_uart", CLKCON, 14, 0, 0), + GATE(SCLK_I2S, "sclk_i2s", "div_i2s", CLKCON, 13, 0, 0), + GATE(SCLK_USBH, "sclk_usbh", "div_usb", CLKCON, 12, 0, 0), + GATE(SCLK_USBD, "sclk_usbd", "div_usb", CLKCON, 11, 0, 0), + GATE(HCLK_HALF, "hclk_half", "div_hclk_half", CLKCON, 10, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_X2, "hclkx2", "ff_hclk", CLKCON, 9, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_SDRAM, "sdram", "hclk", CLKCON, 8, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_USBH, "usb-host", "hclk", CLKCON, 6, 0, 0), + GATE(HCLK_LCD, "lcd", "hclk", CLKCON, 5, 0, 0), + GATE(HCLK_NAND, "nand", "hclk", CLKCON, 4, 0, 0), + GATE(HCLK_DMA3, "dma3", "hclk", CLKCON, 3, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_DMA2, "dma2", "hclk", CLKCON, 2, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_DMA1, "dma1", "hclk", CLKCON, 1, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_DMA0, "dma0", "hclk", CLKCON, 0, CLK_IGNORE_UNUSED, 0), +}; + +struct samsung_clock_alias s3c2412_aliases[] __initdata = { + ALIAS(PCLK_UART0, "s3c2412-uart.0", "uart"), + ALIAS(PCLK_UART1, "s3c2412-uart.1", "uart"), + ALIAS(PCLK_UART2, "s3c2412-uart.2", "uart"), + ALIAS(PCLK_UART0, "s3c2412-uart.0", "clk_uart_baud2"), + ALIAS(PCLK_UART1, "s3c2412-uart.1", "clk_uart_baud2"), + ALIAS(PCLK_UART2, "s3c2412-uart.2", "clk_uart_baud2"), + ALIAS(SCLK_UART, NULL, "clk_uart_baud3"), + ALIAS(PCLK_I2C, "s3c2410-i2c.0", "i2c"), + ALIAS(PCLK_ADC, NULL, "adc"), + ALIAS(PCLK_RTC, NULL, "rtc"), + ALIAS(PCLK_PWM, NULL, "timers"), + ALIAS(HCLK_LCD, NULL, "lcd"), + ALIAS(PCLK_USBD, NULL, "usb-device"), + ALIAS(SCLK_USBD, NULL, "usb-bus-gadget"), + ALIAS(HCLK_USBH, NULL, "usb-host"), + ALIAS(SCLK_USBH, NULL, "usb-bus-host"), + ALIAS(ARMCLK, NULL, "armclk"), + ALIAS(HCLK, NULL, "hclk"), + ALIAS(MPLL, NULL, "mpll"), + ALIAS(MSYSCLK, NULL, "fclk"), +}; + +/* + * fixed rate clocks generated outside the soc + * Only necessary until the devicetree-move is complete + */ +#define XTI 1 +struct samsung_fixed_rate_clock s3c2412_common_frate_clks[] __initdata = { + FRATE(XTI, "xti", NULL, CLK_IS_ROOT, 0), + FRATE(0, "ext", NULL, CLK_IS_ROOT, 0), +}; + +static void __init s3c2412_common_clk_register_fixed_ext(unsigned long xti_f, + unsigned long ext_f) +{ + /* xtal alias is necessary for the current cpufreq driver */ + struct samsung_clock_alias xti_alias = ALIAS(XTI, NULL, "xtal"); + + s3c2412_common_frate_clks[0].fixed_rate = xti_f; + s3c2412_common_frate_clks[1].fixed_rate = ext_f; + samsung_clk_register_fixed_rate(s3c2412_common_frate_clks, + ARRAY_SIZE(s3c2412_common_frate_clks)); + + samsung_clk_register_alias(&xti_alias, 1); +} + +void __init s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f, + unsigned long ext_f, void __iomem *base) +{ + reg_base = base; + + if (np) { + reg_base = of_iomap(np, 0); + if (!reg_base) + panic("%s: failed to map registers\n", __func__); + } + + samsung_clk_init(np, reg_base, NR_CLKS); + + /* Register external clocks only in non-dt cases */ + if (!np) + s3c2412_common_clk_register_fixed_ext(xti_f, ext_f); + + /* Register PLLs. */ + samsung_clk_register_pll(s3c2412_plls, ARRAY_SIZE(s3c2412_plls), + reg_base); + + /* Register common internal clocks. */ + samsung_clk_register_mux(s3c2412_muxes, ARRAY_SIZE(s3c2412_muxes)); + samsung_clk_register_div(s3c2412_dividers, + ARRAY_SIZE(s3c2412_dividers)); + samsung_clk_register_gate(s3c2412_gates, ARRAY_SIZE(s3c2412_gates)); + samsung_clk_register_fixed_factor(s3c2412_ffactor, + ARRAY_SIZE(s3c2412_ffactor)); + samsung_clk_register_alias(s3c2412_aliases, + ARRAY_SIZE(s3c2412_aliases)); + + s3c2412_clk_sleep_init(); +} + +static void __init s3c2412_clk_init(struct device_node *np) +{ + s3c2412_common_clk_init(np, 0, 0, 0); +} +CLK_OF_DECLARE(s3c2412_clk, "samsung,s3c2412-clock", s3c2412_clk_init); diff --git a/include/dt-bindings/clock/s3c2412.h b/include/dt-bindings/clock/s3c2412.h new file mode 100644 index 000000000000..aac1dcfda81c --- /dev/null +++ b/include/dt-bindings/clock/s3c2412.h @@ -0,0 +1,73 @@ +/* + * Copyright (c) 2013 Heiko Stuebner + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Device Tree binding constants clock controllers of Samsung S3C2412. + */ + +#ifndef _DT_BINDINGS_CLOCK_SAMSUNG_S3C2412_CLOCK_H +#define _DT_BINDINGS_CLOCK_SAMSUNG_S3C2412_CLOCK_H + +/* + * Let each exported clock get a unique index, which is used on DT-enabled + * platforms to lookup the clock from a clock specifier. These indices are + * therefore considered an ABI and so must not be changed. This implies + * that new clocks should be added either in free spaces between clock groups + * or at the end. + */ + +/* Core clocks. */ + +/* id 1 is reserved */ +#define MPLL 2 +#define UPLL 3 +#define MDIVCLK 4 +#define MSYSCLK 5 +#define USYSCLK 6 +#define HCLK 7 +#define PCLK 8 +#define ARMDIV 9 +#define ARMCLK 10 + + +/* Special clocks */ +#define SCLK_CAM 16 +#define SCLK_UART 17 +#define SCLK_I2S 18 +#define SCLK_USBD 19 +#define SCLK_USBH 20 + +/* pclk-gates */ +#define PCLK_WDT 32 +#define PCLK_SPI 33 +#define PCLK_I2S 34 +#define PCLK_I2C 35 +#define PCLK_ADC 36 +#define PCLK_RTC 37 +#define PCLK_GPIO 38 +#define PCLK_UART2 39 +#define PCLK_UART1 40 +#define PCLK_UART0 41 +#define PCLK_SDI 42 +#define PCLK_PWM 43 +#define PCLK_USBD 44 + +/* hclk-gates */ +#define HCLK_HALF 48 +#define HCLK_X2 49 +#define HCLK_SDRAM 50 +#define HCLK_USBH 51 +#define HCLK_LCD 52 +#define HCLK_NAND 53 +#define HCLK_DMA3 54 +#define HCLK_DMA2 55 +#define HCLK_DMA1 56 +#define HCLK_DMA0 57 + +/* Total number of clocks. */ +#define NR_CLKS (HCLK_DMA0 + 1) + +#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_S3C2412_CLOCK_H */ -- cgit v1.2.3 From 3f7c01ade226e7006d76e42f8c9b99ada7085312 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Fri, 9 May 2014 05:49:10 +0900 Subject: clk: samsung: add clock controller driver for s3c2410, s3c2440 and s3c2442 This driver can handle the clock controllers of the socs mentioned above, as they share a common clock tree with only small differences. The clock structure is built according to the manuals of the included SoCs and might include changes in comparison to the previous clock structure. As pll-rate-tables only the 12mhz variants are currently included. The original code was wrongly checking for 169mhz xti values [a 0 to much at the end], so the original 16mhz pll table would have never been included and its values are so obscure that I have no possibility to at least check their sane-ness. When using the formula from the manual the resulting frequency is near the table value but still slightly off. Signed-off-by: Heiko Stuebner Acked-by: Mike Turquette Signed-off-by: Kukjin Kim --- drivers/clk/samsung/Makefile | 1 + drivers/clk/samsung/clk-s3c2410.c | 477 ++++++++++++++++++++++++++++++++++++ include/dt-bindings/clock/s3c2410.h | 62 +++++ 3 files changed, 540 insertions(+) create mode 100644 drivers/clk/samsung/clk-s3c2410.c create mode 100644 include/dt-bindings/clock/s3c2410.h (limited to 'include/dt-bindings') diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile index 9892de4978e3..2cb62f87e068 100644 --- a/drivers/clk/samsung/Makefile +++ b/drivers/clk/samsung/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_SOC_EXYNOS5250) += clk-exynos5250.o obj-$(CONFIG_SOC_EXYNOS5420) += clk-exynos5420.o obj-$(CONFIG_SOC_EXYNOS5440) += clk-exynos5440.o obj-$(CONFIG_ARCH_EXYNOS) += clk-exynos-audss.o +obj-$(CONFIG_S3C2410_COMMON_CLK)+= clk-s3c2410.o obj-$(CONFIG_S3C2410_COMMON_DCLK)+= clk-s3c2410-dclk.o obj-$(CONFIG_S3C2412_COMMON_CLK)+= clk-s3c2412.o obj-$(CONFIG_S3C2443_COMMON_CLK)+= clk-s3c2443.o diff --git a/drivers/clk/samsung/clk-s3c2410.c b/drivers/clk/samsung/clk-s3c2410.c new file mode 100644 index 000000000000..7b4182186a30 --- /dev/null +++ b/drivers/clk/samsung/clk-s3c2410.c @@ -0,0 +1,477 @@ +/* + * Copyright (c) 2013 Heiko Stuebner + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Common Clock Framework support for S3C2410 and following SoCs. + */ + +#include +#include +#include +#include +#include +#include + +#include + +#include "clk.h" +#include "clk-pll.h" + +#define LOCKTIME 0x00 +#define MPLLCON 0x04 +#define UPLLCON 0x08 +#define CLKCON 0x0c +#define CLKSLOW 0x10 +#define CLKDIVN 0x14 +#define CAMDIVN 0x18 + +/* the soc types */ +enum supported_socs { + S3C2410, + S3C2440, + S3C2442, +}; + +/* list of PLLs to be registered */ +enum s3c2410_plls { + mpll, upll, +}; + +static void __iomem *reg_base; + +#ifdef CONFIG_PM_SLEEP +static struct samsung_clk_reg_dump *s3c2410_save; + +/* + * list of controller registers to be saved and restored during a + * suspend/resume cycle. + */ +static unsigned long s3c2410_clk_regs[] __initdata = { + LOCKTIME, + MPLLCON, + UPLLCON, + CLKCON, + CLKSLOW, + CLKDIVN, + CAMDIVN, +}; + +static int s3c2410_clk_suspend(void) +{ + samsung_clk_save(reg_base, s3c2410_save, + ARRAY_SIZE(s3c2410_clk_regs)); + + return 0; +} + +static void s3c2410_clk_resume(void) +{ + samsung_clk_restore(reg_base, s3c2410_save, + ARRAY_SIZE(s3c2410_clk_regs)); +} + +static struct syscore_ops s3c2410_clk_syscore_ops = { + .suspend = s3c2410_clk_suspend, + .resume = s3c2410_clk_resume, +}; + +static void s3c2410_clk_sleep_init(void) +{ + s3c2410_save = samsung_clk_alloc_reg_dump(s3c2410_clk_regs, + ARRAY_SIZE(s3c2410_clk_regs)); + if (!s3c2410_save) { + pr_warn("%s: failed to allocate sleep save data, no sleep support!\n", + __func__); + return; + } + + register_syscore_ops(&s3c2410_clk_syscore_ops); + return; +} +#else +static void s3c2410_clk_sleep_init(void) {} +#endif + +PNAME(fclk_p) = { "mpll", "div_slow" }; + +struct samsung_mux_clock s3c2410_common_muxes[] __initdata = { + MUX(FCLK, "fclk", fclk_p, CLKSLOW, 4, 1), +}; + +static struct clk_div_table divslow_d[] = { + { .val = 0, .div = 1 }, + { .val = 1, .div = 2 }, + { .val = 2, .div = 4 }, + { .val = 3, .div = 6 }, + { .val = 4, .div = 8 }, + { .val = 5, .div = 10 }, + { .val = 6, .div = 12 }, + { .val = 7, .div = 14 }, + { /* sentinel */ }, +}; + +struct samsung_div_clock s3c2410_common_dividers[] __initdata = { + DIV_T(0, "div_slow", "xti", CLKSLOW, 0, 3, divslow_d), + DIV(PCLK, "pclk", "hclk", CLKDIVN, 0, 1), +}; + +struct samsung_gate_clock s3c2410_common_gates[] __initdata = { + GATE(PCLK_SPI, "spi", "pclk", CLKCON, 18, 0, 0), + GATE(PCLK_I2S, "i2s", "pclk", CLKCON, 17, 0, 0), + GATE(PCLK_I2C, "i2c", "pclk", CLKCON, 16, 0, 0), + GATE(PCLK_ADC, "adc", "pclk", CLKCON, 15, 0, 0), + GATE(PCLK_RTC, "rtc", "pclk", CLKCON, 14, 0, 0), + GATE(PCLK_GPIO, "gpio", "pclk", CLKCON, 13, CLK_IGNORE_UNUSED, 0), + GATE(PCLK_UART2, "uart2", "pclk", CLKCON, 12, 0, 0), + GATE(PCLK_UART1, "uart1", "pclk", CLKCON, 11, 0, 0), + GATE(PCLK_UART0, "uart0", "pclk", CLKCON, 10, 0, 0), + GATE(PCLK_SDI, "sdi", "pclk", CLKCON, 9, 0, 0), + GATE(PCLK_PWM, "pwm", "pclk", CLKCON, 8, 0, 0), + GATE(HCLK_USBD, "usb-device", "hclk", CLKCON, 7, 0, 0), + GATE(HCLK_USBH, "usb-host", "hclk", CLKCON, 6, 0, 0), + GATE(HCLK_LCD, "lcd", "hclk", CLKCON, 5, 0, 0), + GATE(HCLK_NAND, "nand", "hclk", CLKCON, 4, 0, 0), +}; + +/* should be added _after_ the soc-specific clocks are created */ +struct samsung_clock_alias s3c2410_common_aliases[] __initdata = { + ALIAS(PCLK_I2C, "s3c2410-i2c.0", "i2c"), + ALIAS(PCLK_ADC, NULL, "adc"), + ALIAS(PCLK_RTC, NULL, "rtc"), + ALIAS(PCLK_PWM, NULL, "timers"), + ALIAS(HCLK_LCD, NULL, "lcd"), + ALIAS(HCLK_USBD, NULL, "usb-device"), + ALIAS(HCLK_USBH, NULL, "usb-host"), + ALIAS(UCLK, NULL, "usb-bus-host"), + ALIAS(UCLK, NULL, "usb-bus-gadget"), + ALIAS(ARMCLK, NULL, "armclk"), + ALIAS(UCLK, NULL, "uclk"), + ALIAS(HCLK, NULL, "hclk"), + ALIAS(MPLL, NULL, "mpll"), + ALIAS(FCLK, NULL, "fclk"), +}; + +/* S3C2410 specific clocks */ + +static struct samsung_pll_rate_table pll_s3c2410_12mhz_tbl[] __initdata = { + /* sorted in descending order */ + /* 2410A extras */ + PLL_35XX_RATE(270000000, 127, 1, 1), + PLL_35XX_RATE(268000000, 126, 1, 1), + PLL_35XX_RATE(266000000, 125, 1, 1), + PLL_35XX_RATE(226000000, 105, 1, 1), + PLL_35XX_RATE(210000000, 132, 2, 1), + /* 2410 common */ + PLL_35XX_RATE(203000000, 161, 3, 1), + PLL_35XX_RATE(192000000, 88, 1, 1), + PLL_35XX_RATE(186000000, 85, 1, 1), + PLL_35XX_RATE(180000000, 82, 1, 1), + PLL_35XX_RATE(170000000, 77, 1, 1), + PLL_35XX_RATE(158000000, 71, 1, 1), + PLL_35XX_RATE(152000000, 68, 1, 1), + PLL_35XX_RATE(147000000, 90, 2, 1), + PLL_35XX_RATE(135000000, 82, 2, 1), + PLL_35XX_RATE(124000000, 116, 1, 2), + PLL_35XX_RATE(118000000, 150, 2, 2), + PLL_35XX_RATE(113000000, 105, 1, 2), + PLL_35XX_RATE(101000000, 127, 2, 2), + PLL_35XX_RATE(90000000, 112, 2, 2), + PLL_35XX_RATE(85000000, 105, 2, 2), + PLL_35XX_RATE(79000000, 71, 1, 2), + PLL_35XX_RATE(68000000, 82, 2, 2), + PLL_35XX_RATE(56000000, 142, 2, 3), + PLL_35XX_RATE(48000000, 120, 2, 3), + PLL_35XX_RATE(51000000, 161, 3, 3), + PLL_35XX_RATE(45000000, 82, 1, 3), + PLL_35XX_RATE(34000000, 82, 2, 3), + { /* sentinel */ }, +}; + +static struct samsung_pll_clock s3c2410_plls[] __initdata = { + [mpll] = PLL(pll_s3c2410_mpll, MPLL, "mpll", "xti", + LOCKTIME, MPLLCON, NULL), + [upll] = PLL(pll_s3c2410_upll, UPLL, "upll", "xti", + LOCKTIME, UPLLCON, NULL), +}; + +struct samsung_div_clock s3c2410_dividers[] __initdata = { + DIV(HCLK, "hclk", "mpll", CLKDIVN, 1, 1), +}; + +struct samsung_fixed_factor_clock s3c2410_ffactor[] __initdata = { + /* + * armclk is directly supplied by the fclk, without + * switching possibility like on the s3c244x below. + */ + FFACTOR(ARMCLK, "armclk", "fclk", 1, 1, 0), + + /* uclk is fed from the unmodified upll */ + FFACTOR(UCLK, "uclk", "upll", 1, 1, 0), +}; + +struct samsung_clock_alias s3c2410_aliases[] __initdata = { + ALIAS(PCLK_UART0, "s3c2410-uart.0", "uart"), + ALIAS(PCLK_UART1, "s3c2410-uart.1", "uart"), + ALIAS(PCLK_UART2, "s3c2410-uart.2", "uart"), + ALIAS(PCLK_UART0, "s3c2410-uart.0", "clk_uart_baud0"), + ALIAS(PCLK_UART1, "s3c2410-uart.1", "clk_uart_baud0"), + ALIAS(PCLK_UART2, "s3c2410-uart.2", "clk_uart_baud0"), + ALIAS(UCLK, NULL, "clk_uart_baud1"), +}; + +/* S3C244x specific clocks */ + +static struct samsung_pll_rate_table pll_s3c244x_12mhz_tbl[] __initdata = { + /* sorted in descending order */ + PLL_35XX_RATE(400000000, 0x5c, 1, 1), + PLL_35XX_RATE(390000000, 0x7a, 2, 1), + PLL_35XX_RATE(380000000, 0x57, 1, 1), + PLL_35XX_RATE(370000000, 0xb1, 4, 1), + PLL_35XX_RATE(360000000, 0x70, 2, 1), + PLL_35XX_RATE(350000000, 0xa7, 4, 1), + PLL_35XX_RATE(340000000, 0x4d, 1, 1), + PLL_35XX_RATE(330000000, 0x66, 2, 1), + PLL_35XX_RATE(320000000, 0x98, 4, 1), + PLL_35XX_RATE(310000000, 0x93, 4, 1), + PLL_35XX_RATE(300000000, 0x75, 3, 1), + PLL_35XX_RATE(240000000, 0x70, 1, 2), + PLL_35XX_RATE(230000000, 0x6b, 1, 2), + PLL_35XX_RATE(220000000, 0x66, 1, 2), + PLL_35XX_RATE(210000000, 0x84, 2, 2), + PLL_35XX_RATE(200000000, 0x5c, 1, 2), + PLL_35XX_RATE(190000000, 0x57, 1, 2), + PLL_35XX_RATE(180000000, 0x70, 2, 2), + PLL_35XX_RATE(170000000, 0x4d, 1, 2), + PLL_35XX_RATE(160000000, 0x98, 4, 2), + PLL_35XX_RATE(150000000, 0x75, 3, 2), + PLL_35XX_RATE(120000000, 0x70, 1, 3), + PLL_35XX_RATE(110000000, 0x66, 1, 3), + PLL_35XX_RATE(100000000, 0x5c, 1, 3), + PLL_35XX_RATE(90000000, 0x70, 2, 3), + PLL_35XX_RATE(80000000, 0x98, 4, 3), + PLL_35XX_RATE(75000000, 0x75, 3, 3), + { /* sentinel */ }, +}; + +static struct samsung_pll_clock s3c244x_common_plls[] __initdata = { + [mpll] = PLL(pll_s3c2440_mpll, MPLL, "mpll", "xti", + LOCKTIME, MPLLCON, NULL), + [upll] = PLL(pll_s3c2410_upll, UPLL, "upll", "xti", + LOCKTIME, UPLLCON, NULL), +}; + +PNAME(hclk_p) = { "fclk", "div_hclk_2", "div_hclk_4", "div_hclk_3" }; +PNAME(armclk_p) = { "fclk", "hclk" }; + +struct samsung_mux_clock s3c244x_common_muxes[] __initdata = { + MUX(HCLK, "hclk", hclk_p, CLKDIVN, 1, 2), + MUX(ARMCLK, "armclk", armclk_p, CAMDIVN, 12, 1), +}; + +struct samsung_fixed_factor_clock s3c244x_common_ffactor[] __initdata = { + FFACTOR(0, "div_hclk_2", "fclk", 1, 2, 0), + FFACTOR(0, "ff_cam", "div_cam", 2, 1, CLK_SET_RATE_PARENT), +}; + +static struct clk_div_table div_hclk_4_d[] = { + { .val = 0, .div = 4 }, + { .val = 1, .div = 8 }, + { /* sentinel */ }, +}; + +static struct clk_div_table div_hclk_3_d[] = { + { .val = 0, .div = 3 }, + { .val = 1, .div = 6 }, + { /* sentinel */ }, +}; + +struct samsung_div_clock s3c244x_common_dividers[] __initdata = { + DIV(UCLK, "uclk", "upll", CLKDIVN, 3, 1), + DIV(0, "div_hclk", "fclk", CLKDIVN, 1, 1), + DIV_T(0, "div_hclk_4", "fclk", CAMDIVN, 9, 1, div_hclk_4_d), + DIV_T(0, "div_hclk_3", "fclk", CAMDIVN, 8, 1, div_hclk_3_d), + DIV(0, "div_cam", "upll", CAMDIVN, 0, 3), +}; + +struct samsung_gate_clock s3c244x_common_gates[] __initdata = { + GATE(HCLK_CAM, "cam", "hclk", CLKCON, 19, 0, 0), +}; + +struct samsung_clock_alias s3c244x_common_aliases[] __initdata = { + ALIAS(PCLK_UART0, "s3c2440-uart.0", "uart"), + ALIAS(PCLK_UART1, "s3c2440-uart.1", "uart"), + ALIAS(PCLK_UART2, "s3c2440-uart.2", "uart"), + ALIAS(PCLK_UART0, "s3c2440-uart.0", "clk_uart_baud2"), + ALIAS(PCLK_UART1, "s3c2440-uart.1", "clk_uart_baud2"), + ALIAS(PCLK_UART2, "s3c2440-uart.2", "clk_uart_baud2"), + ALIAS(HCLK_CAM, NULL, "camif"), + ALIAS(CAMIF, NULL, "camif-upll"), +}; + +/* S3C2440 specific clocks */ + +PNAME(s3c2440_camif_p) = { "upll", "ff_cam" }; + +struct samsung_mux_clock s3c2440_muxes[] __initdata = { + MUX(CAMIF, "camif", s3c2440_camif_p, CAMDIVN, 4, 1), +}; + +struct samsung_gate_clock s3c2440_gates[] __initdata = { + GATE(PCLK_AC97, "ac97", "pclk", CLKCON, 20, 0, 0), +}; + +/* S3C2442 specific clocks */ + +struct samsung_fixed_factor_clock s3c2442_ffactor[] __initdata = { + FFACTOR(0, "upll_3", "upll", 1, 3, 0), +}; + +PNAME(s3c2442_camif_p) = { "upll", "ff_cam", "upll", "upll_3" }; + +struct samsung_mux_clock s3c2442_muxes[] __initdata = { + MUX(CAMIF, "camif", s3c2442_camif_p, CAMDIVN, 4, 2), +}; + +/* + * fixed rate clocks generated outside the soc + * Only necessary until the devicetree-move is complete + */ +#define XTI 1 +struct samsung_fixed_rate_clock s3c2410_common_frate_clks[] __initdata = { + FRATE(XTI, "xti", NULL, CLK_IS_ROOT, 0), +}; + +static void __init s3c2410_common_clk_register_fixed_ext(unsigned long xti_f) +{ + struct samsung_clock_alias xti_alias = ALIAS(XTI, NULL, "xtal"); + + s3c2410_common_frate_clks[0].fixed_rate = xti_f; + samsung_clk_register_fixed_rate(s3c2410_common_frate_clks, + ARRAY_SIZE(s3c2410_common_frate_clks)); + + samsung_clk_register_alias(&xti_alias, 1); +} + +void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f, + int current_soc, + void __iomem *base) +{ + reg_base = base; + + if (np) { + reg_base = of_iomap(np, 0); + if (!reg_base) + panic("%s: failed to map registers\n", __func__); + } + + samsung_clk_init(np, reg_base, NR_CLKS); + + /* Register external clocks only in non-dt cases */ + if (!np) + s3c2410_common_clk_register_fixed_ext(xti_f); + + if (current_soc == 2410) { + if (_get_rate("xti") == 12 * MHZ) { + s3c2410_plls[mpll].rate_table = pll_s3c2410_12mhz_tbl; + s3c2410_plls[upll].rate_table = pll_s3c2410_12mhz_tbl; + } + + /* Register PLLs. */ + samsung_clk_register_pll(s3c2410_plls, + ARRAY_SIZE(s3c2410_plls), reg_base); + + } else { /* S3C2440, S3C2442 */ + if (_get_rate("xti") == 12 * MHZ) { + /* + * plls follow different calculation schemes, with the + * upll following the same scheme as the s3c2410 plls + */ + s3c244x_common_plls[mpll].rate_table = + pll_s3c244x_12mhz_tbl; + s3c244x_common_plls[upll].rate_table = + pll_s3c2410_12mhz_tbl; + } + + /* Register PLLs. */ + samsung_clk_register_pll(s3c244x_common_plls, + ARRAY_SIZE(s3c244x_common_plls), reg_base); + } + + /* Register common internal clocks. */ + samsung_clk_register_mux(s3c2410_common_muxes, + ARRAY_SIZE(s3c2410_common_muxes)); + samsung_clk_register_div(s3c2410_common_dividers, + ARRAY_SIZE(s3c2410_common_dividers)); + samsung_clk_register_gate(s3c2410_common_gates, + ARRAY_SIZE(s3c2410_common_gates)); + + if (current_soc == S3C2440 || current_soc == S3C2442) { + samsung_clk_register_div(s3c244x_common_dividers, + ARRAY_SIZE(s3c244x_common_dividers)); + samsung_clk_register_gate(s3c244x_common_gates, + ARRAY_SIZE(s3c244x_common_gates)); + samsung_clk_register_mux(s3c244x_common_muxes, + ARRAY_SIZE(s3c244x_common_muxes)); + samsung_clk_register_fixed_factor(s3c244x_common_ffactor, + ARRAY_SIZE(s3c244x_common_ffactor)); + } + + /* Register SoC-specific clocks. */ + switch (current_soc) { + case S3C2410: + samsung_clk_register_div(s3c2410_dividers, + ARRAY_SIZE(s3c2410_dividers)); + samsung_clk_register_fixed_factor(s3c2410_ffactor, + ARRAY_SIZE(s3c2410_ffactor)); + samsung_clk_register_alias(s3c2410_aliases, + ARRAY_SIZE(s3c2410_common_aliases)); + break; + case S3C2440: + samsung_clk_register_mux(s3c2440_muxes, + ARRAY_SIZE(s3c2440_muxes)); + samsung_clk_register_gate(s3c2440_gates, + ARRAY_SIZE(s3c2440_gates)); + break; + case S3C2442: + samsung_clk_register_mux(s3c2442_muxes, + ARRAY_SIZE(s3c2442_muxes)); + samsung_clk_register_fixed_factor(s3c2442_ffactor, + ARRAY_SIZE(s3c2442_ffactor)); + break; + } + + /* + * Register common aliases at the end, as some of the aliased clocks + * are SoC specific. + */ + samsung_clk_register_alias(s3c2410_common_aliases, + ARRAY_SIZE(s3c2410_common_aliases)); + + if (current_soc == S3C2440 || current_soc == S3C2442) { + samsung_clk_register_alias(s3c244x_common_aliases, + ARRAY_SIZE(s3c244x_common_aliases)); + } + + s3c2410_clk_sleep_init(); +} + +static void __init s3c2410_clk_init(struct device_node *np) +{ + s3c2410_common_clk_init(np, 0, S3C2410, 0); +} +CLK_OF_DECLARE(s3c2410_clk, "samsung,s3c2410-clock", s3c2410_clk_init); + +static void __init s3c2440_clk_init(struct device_node *np) +{ + s3c2410_common_clk_init(np, 0, S3C2440, 0); +} +CLK_OF_DECLARE(s3c2440_clk, "samsung,s3c2440-clock", s3c2440_clk_init); + +static void __init s3c2442_clk_init(struct device_node *np) +{ + s3c2410_common_clk_init(np, 0, S3C2442, 0); +} +CLK_OF_DECLARE(s3c2442_clk, "samsung,s3c2442-clock", s3c2442_clk_init); diff --git a/include/dt-bindings/clock/s3c2410.h b/include/dt-bindings/clock/s3c2410.h new file mode 100644 index 000000000000..352a7673fc69 --- /dev/null +++ b/include/dt-bindings/clock/s3c2410.h @@ -0,0 +1,62 @@ +/* + * Copyright (c) 2013 Heiko Stuebner + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Device Tree binding constants clock controllers of Samsung S3C2410 and later. + */ + +#ifndef _DT_BINDINGS_CLOCK_SAMSUNG_S3C2410_CLOCK_H +#define _DT_BINDINGS_CLOCK_SAMSUNG_S3C2410_CLOCK_H + +/* + * Let each exported clock get a unique index, which is used on DT-enabled + * platforms to lookup the clock from a clock specifier. These indices are + * therefore considered an ABI and so must not be changed. This implies + * that new clocks should be added either in free spaces between clock groups + * or at the end. + */ + +/* Core clocks. */ + +/* id 1 is reserved */ +#define MPLL 2 +#define UPLL 3 +#define FCLK 4 +#define HCLK 5 +#define PCLK 6 +#define UCLK 7 +#define ARMCLK 8 + +/* pclk-gates */ +#define PCLK_UART0 16 +#define PCLK_UART1 17 +#define PCLK_UART2 18 +#define PCLK_I2C 19 +#define PCLK_SDI 20 +#define PCLK_SPI 21 +#define PCLK_ADC 22 +#define PCLK_AC97 23 +#define PCLK_I2S 24 +#define PCLK_PWM 25 +#define PCLK_RTC 26 +#define PCLK_GPIO 27 + + +/* hclk-gates */ +#define HCLK_LCD 32 +#define HCLK_USBH 33 +#define HCLK_USBD 34 +#define HCLK_NAND 35 +#define HCLK_CAM 36 + + +#define CAMIF 40 + + +/* Total number of clocks. */ +#define NR_CLKS (CAMIF + 1) + +#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_S3C2443_CLOCK_H */ -- cgit v1.2.3