From f38b0dd63f0d0cca753bf0997eefdfb23dcc9518 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Wed, 12 Jun 2013 16:04:34 +0300 Subject: CLK: TI: Add DPLL clock support The OMAP clock driver now supports DPLL clock type. This patch also adds support for DT DPLL nodes. Signed-off-by: Tero Kristo Acked-by: Tony Lindgren Signed-off-by: Mike Turquette --- include/linux/clk/ti.h | 172 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 172 insertions(+) (limited to 'include/linux/clk') diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h index c6eded5eea76..3f9de3973582 100644 --- a/include/linux/clk/ti.h +++ b/include/linux/clk/ti.h @@ -17,6 +17,153 @@ #include +/** + * struct dpll_data - DPLL registers and integration data + * @mult_div1_reg: register containing the DPLL M and N bitfields + * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg + * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg + * @clk_bypass: struct clk pointer to the clock's bypass clock input + * @clk_ref: struct clk pointer to the clock's reference clock input + * @control_reg: register containing the DPLL mode bitfield + * @enable_mask: mask of the DPLL mode bitfield in @control_reg + * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate() + * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate() + * @last_rounded_m4xen: cache of the last M4X result of + * omap4_dpll_regm4xen_round_rate() + * @last_rounded_lpmode: cache of the last lpmode result of + * omap4_dpll_lpmode_recalc() + * @max_multiplier: maximum valid non-bypass multiplier value (actual) + * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate() + * @min_divider: minimum valid non-bypass divider value (actual) + * @max_divider: maximum valid non-bypass divider value (actual) + * @modes: possible values of @enable_mask + * @autoidle_reg: register containing the DPLL autoidle mode bitfield + * @idlest_reg: register containing the DPLL idle status bitfield + * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg + * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg + * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg + * @lpmode_mask: mask of the DPLL low-power mode bitfield in @control_reg + * @m4xen_mask: mask of the DPLL M4X multiplier bitfield in @control_reg + * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg + * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs + * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs + * @flags: DPLL type/features (see below) + * + * Possible values for @flags: + * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs) + * + * @freqsel_mask is only used on the OMAP34xx family and AM35xx. + * + * XXX Some DPLLs have multiple bypass inputs, so it's not technically + * correct to only have one @clk_bypass pointer. + * + * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m, + * @last_rounded_n) should be separated from the runtime-fixed fields + * and placed into a different structure, so that the runtime-fixed data + * can be placed into read-only space. + */ +struct dpll_data { + void __iomem *mult_div1_reg; + u32 mult_mask; + u32 div1_mask; + struct clk *clk_bypass; + struct clk *clk_ref; + void __iomem *control_reg; + u32 enable_mask; + unsigned long last_rounded_rate; + u16 last_rounded_m; + u8 last_rounded_m4xen; + u8 last_rounded_lpmode; + u16 max_multiplier; + u8 last_rounded_n; + u8 min_divider; + u16 max_divider; + u8 modes; + void __iomem *autoidle_reg; + void __iomem *idlest_reg; + u32 autoidle_mask; + u32 freqsel_mask; + u32 idlest_mask; + u32 dco_mask; + u32 sddiv_mask; + u32 lpmode_mask; + u32 m4xen_mask; + u8 auto_recal_bit; + u8 recal_en_bit; + u8 recal_st_bit; + u8 flags; +}; + +struct clk_hw_omap_ops; + +/** + * struct clk_hw_omap - OMAP struct clk + * @node: list_head connecting this clock into the full clock list + * @enable_reg: register to write to enable the clock (see @enable_bit) + * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg) + * @flags: see "struct clk.flags possibilities" above + * @clksel_reg: for clksel clks, register va containing src/divisor select + * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector + * @clksel: for clksel clks, pointer to struct clksel for this clock + * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock + * @clkdm_name: clockdomain name that this clock is contained in + * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime + * @ops: clock ops for this clock + */ +struct clk_hw_omap { + struct clk_hw hw; + struct list_head node; + unsigned long fixed_rate; + u8 fixed_div; + void __iomem *enable_reg; + u8 enable_bit; + u8 flags; + void __iomem *clksel_reg; + u32 clksel_mask; + const struct clksel *clksel; + struct dpll_data *dpll_data; + const char *clkdm_name; + struct clockdomain *clkdm; + const struct clk_hw_omap_ops *ops; +}; + +/* + * struct clk_hw_omap.flags possibilities + * + * XXX document the rest of the clock flags here + * + * ENABLE_REG_32BIT: (OMAP1 only) clock control register must be accessed + * with 32bit ops, by default OMAP1 uses 16bit ops. + * CLOCK_IDLE_CONTROL: (OMAP1 only) clock has autoidle support. + * CLOCK_NO_IDLE_PARENT: (OMAP1 only) when clock is enabled, its parent + * clock is put to no-idle mode. + * ENABLE_ON_INIT: Clock is enabled on init. + * INVERT_ENABLE: By default, clock enable bit behavior is '1' enable, '0' + * disable. This inverts the behavior making '0' enable and '1' disable. + * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL + * bits share the same register. This flag allows the + * omap4_dpllmx*() code to determine which GATE_CTRL bit field + * should be used. This is a temporary solution - a better approach + * would be to associate clock type-specific data with the clock, + * similar to the struct dpll_data approach. + * MEMMAP_ADDRESSING: Use memmap addressing to access clock registers. + */ +#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */ +#define CLOCK_IDLE_CONTROL (1 << 1) +#define CLOCK_NO_IDLE_PARENT (1 << 2) +#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */ +#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */ +#define CLOCK_CLKOUTX2 (1 << 5) +#define MEMMAP_ADDRESSING (1 << 6) + +/* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */ +#define DPLL_LOW_POWER_STOP 0x1 +#define DPLL_LOW_POWER_BYPASS 0x5 +#define DPLL_LOCKED 0x7 + +/* DPLL Type and DCO Selection Flags */ +#define DPLL_J_TYPE 0x1 + /** * struct ti_dt_clk - OMAP DT clock alias declarations * @lk: clock lookup definition @@ -68,10 +215,35 @@ struct ti_clk_ll_ops { extern struct ti_clk_ll_ops *ti_clk_ll_ops; +#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw) + +void omap2_init_clk_hw_omap_clocks(struct clk *clk); +int omap3_noncore_dpll_enable(struct clk_hw *hw); +void omap3_noncore_dpll_disable(struct clk_hw *hw); +int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate); +unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw, + unsigned long parent_rate); +long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw, + unsigned long target_rate, + unsigned long *parent_rate); +u8 omap2_init_dpll_parent(struct clk_hw *hw); +unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate); +long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate, + unsigned long *parent_rate); +void omap2_init_clk_clkdm(struct clk_hw *clk); +unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw, + unsigned long parent_rate); +int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate, + unsigned long parent_rate); + void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index); void ti_dt_clocks_register(struct ti_dt_clk *oclks); void ti_dt_clk_init_provider(struct device_node *np, int index); int ti_clk_retry_init(struct device_node *node, struct clk_hw *hw, ti_of_clk_init_cb_t func); +extern const struct clk_hw_omap_ops clkhwops_omap3_dpll; +extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx; + #endif -- cgit v1.2.3