From 66507c7bc8895f0da6b4ad87e96d61a9f7d7a118 Mon Sep 17 00:00:00 2001 From: Kamal Dasu Date: Thu, 1 May 2014 20:51:19 -0400 Subject: mtd: nand: Add support to use nand_base poi databuf as bounce buffer nand_base can be passed a kmap()'d buffers from highmem by filesystems like jffs2. This results in failure to map the physical address of the DMA buffer on various contoller driver on different platforms. This change adds a chip option to use preallocated databuf as bounce buffers used in nand_do_read_ops() and nand_do_write_ops(). This allows for specific nand controller driver to set this option as needed. Signed-off-by: Kamal Dasu Signed-off-by: Brian Norris --- include/linux/mtd/nand.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux/mtd/nand.h') diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 7a922e6c4e4b..2f0af2891f0f 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -175,6 +175,11 @@ typedef enum { #define NAND_OWN_BUFFERS 0x00020000 /* Chip may not exist, so silence any errors in scan */ #define NAND_SCAN_SILENT_NODEV 0x00040000 +/* + * This option could be defined by controller drivers to protect against + * kmap'ed, vmalloc'ed highmem buffers being passed from upper layers + */ +#define NAND_USE_BOUNCE_BUFFER 0x00080000 /* * Autodetect nand buswidth with readid/onfi. * This suppose the driver will configure the hardware in 8 bits mode -- cgit v1.2.3