From b294a290d24d1196d68399cc3a9b8c50bfb55abd Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Tue, 30 Jun 2009 02:13:01 -0400 Subject: Revert "power: remove POWER_SUPPLY_PROP_CAPACITY_LEVEL" This reverts commit 8efe444038a205e79b38b7ad03878824901849a8 and 4cbc76eadf56399cd11fb736b33c53aec9caab8c. Richard@laptop.org was apparently using CAPACITY_LEVEL for debugging battery/EC problems, and was upset that it was removed. This readds it. Conflicts: Documentation/power_supply_class.txt Signed-off-by: Andres Salomon Signed-off-by: Anton Vorontsov --- include/linux/power_supply.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include') diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h index 594c494ac3f0..0ab6aa171241 100644 --- a/include/linux/power_supply.h +++ b/include/linux/power_supply.h @@ -58,6 +58,15 @@ enum { POWER_SUPPLY_TECHNOLOGY_LiMn, }; +enum { + POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN = 0, + POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL, + POWER_SUPPLY_CAPACITY_LEVEL_LOW, + POWER_SUPPLY_CAPACITY_LEVEL_NORMAL, + POWER_SUPPLY_CAPACITY_LEVEL_HIGH, + POWER_SUPPLY_CAPACITY_LEVEL_FULL, +}; + enum power_supply_property { /* Properties of type `int' */ POWER_SUPPLY_PROP_STATUS = 0, @@ -89,6 +98,7 @@ enum power_supply_property { POWER_SUPPLY_PROP_ENERGY_NOW, POWER_SUPPLY_PROP_ENERGY_AVG, POWER_SUPPLY_PROP_CAPACITY, /* in percents! */ + POWER_SUPPLY_PROP_CAPACITY_LEVEL, POWER_SUPPLY_PROP_TEMP, POWER_SUPPLY_PROP_TEMP_AMBIENT, POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, -- cgit v1.2.3 From ee8076ed3e1cdd0cd1e61318386932669c90b92f Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Thu, 2 Jul 2009 09:45:18 -0400 Subject: power_supply: Add a charge_type property, and use it for olpc driver This adds a new sysfs file called 'charge_type' which displays the type of charging (unknown, n/a, trickle charge, or fast charging). This allows things like battery diagnostics to determine what the battery/EC is doing without resorting to changing the 'status' sysfs output. Signed-off-by: Andres Salomon Acked-by: Mark Brown Signed-off-by: Anton Vorontsov --- Documentation/power/power_supply_class.txt | 5 +++++ drivers/power/olpc_battery.c | 9 +++++++++ drivers/power/power_supply_sysfs.c | 6 ++++++ include/linux/power_supply.h | 8 ++++++++ 4 files changed, 28 insertions(+) (limited to 'include') diff --git a/Documentation/power/power_supply_class.txt b/Documentation/power/power_supply_class.txt index 709d95571d7b..9f16c5178b66 100644 --- a/Documentation/power/power_supply_class.txt +++ b/Documentation/power/power_supply_class.txt @@ -76,6 +76,11 @@ STATUS - this attribute represents operating status (charging, full, discharging (i.e. powering a load), etc.). This corresponds to BATTERY_STATUS_* values, as defined in battery.h. +CHARGE_TYPE - batteries can typically charge at different rates. +This defines trickle and fast charges. For batteries that +are already charged or discharging, 'n/a' can be displayed (or +'unknown', if the status is not known). + HEALTH - represents health of the battery, values corresponds to POWER_SUPPLY_HEALTH_*, defined in battery.h. diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c index 602bbd008f78..8fefe5a73558 100644 --- a/drivers/power/olpc_battery.c +++ b/drivers/power/olpc_battery.c @@ -233,6 +233,14 @@ static int olpc_bat_get_property(struct power_supply *psy, if (ret) return ret; break; + case POWER_SUPPLY_PROP_CHARGE_TYPE: + if (ec_byte & BAT_STAT_TRICKLE) + val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE; + else if (ec_byte & BAT_STAT_CHARGING) + val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST; + else + val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE; + break; case POWER_SUPPLY_PROP_PRESENT: val->intval = !!(ec_byte & (BAT_STAT_PRESENT | BAT_STAT_TRICKLE)); @@ -325,6 +333,7 @@ static int olpc_bat_get_property(struct power_supply *psy, static enum power_supply_property olpc_bat_props[] = { POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_CHARGE_TYPE, POWER_SUPPLY_PROP_PRESENT, POWER_SUPPLY_PROP_HEALTH, POWER_SUPPLY_PROP_TECHNOLOGY, diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c index 9deabbde6fd6..08144393d64b 100644 --- a/drivers/power/power_supply_sysfs.c +++ b/drivers/power/power_supply_sysfs.c @@ -43,6 +43,9 @@ static ssize_t power_supply_show_property(struct device *dev, static char *status_text[] = { "Unknown", "Charging", "Discharging", "Not charging", "Full" }; + static char *charge_type[] = { + "Unknown", "N/A", "Trickle", "Fast" + }; static char *health_text[] = { "Unknown", "Good", "Overheat", "Dead", "Over voltage", "Unspecified failure", "Cold", @@ -70,6 +73,8 @@ static ssize_t power_supply_show_property(struct device *dev, if (off == POWER_SUPPLY_PROP_STATUS) return sprintf(buf, "%s\n", status_text[value.intval]); + else if (off == POWER_SUPPLY_PROP_CHARGE_TYPE) + return sprintf(buf, "%s\n", charge_type[value.intval]); else if (off == POWER_SUPPLY_PROP_HEALTH) return sprintf(buf, "%s\n", health_text[value.intval]); else if (off == POWER_SUPPLY_PROP_TECHNOLOGY) @@ -86,6 +91,7 @@ static ssize_t power_supply_show_property(struct device *dev, static struct device_attribute power_supply_attrs[] = { /* Properties of type `int' */ POWER_SUPPLY_ATTR(status), + POWER_SUPPLY_ATTR(charge_type), POWER_SUPPLY_ATTR(health), POWER_SUPPLY_ATTR(present), POWER_SUPPLY_ATTR(online), diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h index 0ab6aa171241..4c7c6fc35487 100644 --- a/include/linux/power_supply.h +++ b/include/linux/power_supply.h @@ -38,6 +38,13 @@ enum { POWER_SUPPLY_STATUS_FULL, }; +enum { + POWER_SUPPLY_CHARGE_TYPE_UNKNOWN = 0, + POWER_SUPPLY_CHARGE_TYPE_NONE, + POWER_SUPPLY_CHARGE_TYPE_TRICKLE, + POWER_SUPPLY_CHARGE_TYPE_FAST, +}; + enum { POWER_SUPPLY_HEALTH_UNKNOWN = 0, POWER_SUPPLY_HEALTH_GOOD, @@ -70,6 +77,7 @@ enum { enum power_supply_property { /* Properties of type `int' */ POWER_SUPPLY_PROP_STATUS = 0, + POWER_SUPPLY_PROP_CHARGE_TYPE, POWER_SUPPLY_PROP_HEALTH, POWER_SUPPLY_PROP_PRESENT, POWER_SUPPLY_PROP_ONLINE, -- cgit v1.2.3 From e5f5ccb646bc6009572b5c23201b5e81638ff150 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Thu, 23 Jul 2009 20:35:53 +0200 Subject: power_supply: get_by_name and set_charged functionality This adds a function that indicates that a battery is fully charged. It also includes functions to get a power_supply device from the class of registered devices by name reference. These can be used to find a specific battery to call power_supply_set_battery_charged() on. Some battery drivers might need this information to calibrate themselves. Signed-off-by: Daniel Mack Cc: Ian Molton Cc: Anton Vorontsov Cc: Matt Reimer Signed-off-by: Anton Vorontsov --- drivers/power/power_supply_core.c | 28 ++++++++++++++++++++++++++++ include/linux/power_supply.h | 3 +++ 2 files changed, 31 insertions(+) (limited to 'include') diff --git a/drivers/power/power_supply_core.c b/drivers/power/power_supply_core.c index 12cd6e36ff1d..cce75b40b435 100644 --- a/drivers/power/power_supply_core.c +++ b/drivers/power/power_supply_core.c @@ -116,6 +116,34 @@ int power_supply_is_system_supplied(void) } EXPORT_SYMBOL_GPL(power_supply_is_system_supplied); +int power_supply_set_battery_charged(struct power_supply *psy) +{ + if (psy->type == POWER_SUPPLY_TYPE_BATTERY && psy->set_charged) { + psy->set_charged(psy); + return 0; + } + + return -EINVAL; +} +EXPORT_SYMBOL_GPL(power_supply_set_battery_charged); + +static int power_supply_match_device_by_name(struct device *dev, void *data) +{ + const char *name = data; + struct power_supply *psy = dev_get_drvdata(dev); + + return strcmp(psy->name, name) == 0; +} + +struct power_supply *power_supply_get_by_name(char *name) +{ + struct device *dev = class_find_device(power_supply_class, NULL, name, + power_supply_match_device_by_name); + + return dev ? dev_get_drvdata(dev) : NULL; +} +EXPORT_SYMBOL_GPL(power_supply_get_by_name); + int power_supply_register(struct device *parent, struct power_supply *psy) { int rc = 0; diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h index 4c7c6fc35487..b5d096d3a9be 100644 --- a/include/linux/power_supply.h +++ b/include/linux/power_supply.h @@ -144,6 +144,7 @@ struct power_supply { enum power_supply_property psp, union power_supply_propval *val); void (*external_power_changed)(struct power_supply *psy); + void (*set_charged)(struct power_supply *psy); /* For APM emulation, think legacy userspace. */ int use_for_apm; @@ -183,8 +184,10 @@ struct power_supply_info { int use_for_apm; }; +extern struct power_supply *power_supply_get_by_name(char *name); extern void power_supply_changed(struct power_supply *psy); extern int power_supply_am_i_supplied(struct power_supply *psy); +extern int power_supply_set_battery_charged(struct power_supply *psy); #if defined(CONFIG_POWER_SUPPLY) || defined(CONFIG_POWER_SUPPLY_MODULE) extern int power_supply_is_system_supplied(void); -- cgit v1.2.3 From b8bdc1d0cfc488ac0d94724639f9a61b0a5a1d40 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 31 Aug 2009 06:20:12 +0200 Subject: wm97xx_battery: Use platform_data This patch converts the wm97xx-battery driver to use platform_data supplied by ac97 bus. Signed-off-by: Marek Vasut Signed-off-by: Anton Vorontsov --- drivers/power/wm97xx_battery.c | 32 +++++++++++++++++++++++++++----- include/linux/wm97xx.h | 18 ++++++++++++++++++ include/linux/wm97xx_batt.h | 18 ++++-------------- 3 files changed, 49 insertions(+), 19 deletions(-) (limited to 'include') diff --git a/drivers/power/wm97xx_battery.c b/drivers/power/wm97xx_battery.c index 8bde92126d34..14ebd960ebe5 100644 --- a/drivers/power/wm97xx_battery.c +++ b/drivers/power/wm97xx_battery.c @@ -22,17 +22,19 @@ #include #include #include -#include static DEFINE_MUTEX(bat_lock); static struct work_struct bat_work; struct mutex work_lock; static int bat_status = POWER_SUPPLY_STATUS_UNKNOWN; -static struct wm97xx_batt_info *pdata; +static struct wm97xx_batt_info *gpdata; static enum power_supply_property *prop; static unsigned long wm97xx_read_bat(struct power_supply *bat_ps) { + struct wm97xx_pdata *wmdata = bat_ps->dev->parent->platform_data; + struct wm97xx_batt_pdata *pdata = wmdata->batt_pdata; + return wm97xx_read_aux_adc(bat_ps->dev->parent->driver_data, pdata->batt_aux) * pdata->batt_mult / pdata->batt_div; @@ -40,6 +42,9 @@ static unsigned long wm97xx_read_bat(struct power_supply *bat_ps) static unsigned long wm97xx_read_temp(struct power_supply *bat_ps) { + struct wm97xx_pdata *wmdata = bat_ps->dev->parent->platform_data; + struct wm97xx_batt_pdata *pdata = wmdata->batt_pdata; + return wm97xx_read_aux_adc(bat_ps->dev->parent->driver_data, pdata->temp_aux) * pdata->temp_mult / pdata->temp_div; @@ -49,6 +54,9 @@ static int wm97xx_bat_get_property(struct power_supply *bat_ps, enum power_supply_property psp, union power_supply_propval *val) { + struct wm97xx_pdata *wmdata = bat_ps->dev->parent->platform_data; + struct wm97xx_batt_pdata *pdata = wmdata->batt_pdata; + switch (psp) { case POWER_SUPPLY_PROP_STATUS: val->intval = bat_status; @@ -97,6 +105,8 @@ static void wm97xx_bat_external_power_changed(struct power_supply *bat_ps) static void wm97xx_bat_update(struct power_supply *bat_ps) { int old_status = bat_status; + struct wm97xx_pdata *wmdata = bat_ps->dev->parent->platform_data; + struct wm97xx_batt_pdata *pdata = wmdata->batt_pdata; mutex_lock(&work_lock); @@ -149,6 +159,15 @@ static int __devinit wm97xx_bat_probe(struct platform_device *dev) int ret = 0; int props = 1; /* POWER_SUPPLY_PROP_PRESENT */ int i = 0; + struct wm97xx_pdata *wmdata = dev->dev.platform_data; + struct wm97xx_batt_pdata *pdata; + + if (gpdata) { + dev_err(&dev->dev, "Do not pass platform_data through " + "wm97xx_bat_set_pdata!\n"); + return -EINVAL; + } else + pdata = wmdata->batt_pdata; if (dev->id != -1) return -EINVAL; @@ -156,7 +175,7 @@ static int __devinit wm97xx_bat_probe(struct platform_device *dev) mutex_init(&work_lock); if (!pdata) { - dev_err(&dev->dev, "Please use wm97xx_bat_set_pdata\n"); + dev_err(&dev->dev, "No platform_data supplied\n"); return -EINVAL; } @@ -229,6 +248,9 @@ err: static int __devexit wm97xx_bat_remove(struct platform_device *dev) { + struct wm97xx_pdata *wmdata = dev->dev.platform_data; + struct wm97xx_batt_pdata *pdata = wmdata->batt_pdata; + if (pdata && pdata->charge_gpio && pdata->charge_gpio >= 0) gpio_free(pdata->charge_gpio); flush_scheduled_work(); @@ -258,9 +280,9 @@ static void __exit wm97xx_bat_exit(void) platform_driver_unregister(&wm97xx_bat_driver); } -void __init wm97xx_bat_set_pdata(struct wm97xx_batt_info *data) +void wm97xx_bat_set_pdata(struct wm97xx_batt_info *data) { - pdata = data; + gpdata = data; } EXPORT_SYMBOL_GPL(wm97xx_bat_set_pdata); diff --git a/include/linux/wm97xx.h b/include/linux/wm97xx.h index 6f69968eab24..b2c2297844e3 100644 --- a/include/linux/wm97xx.h +++ b/include/linux/wm97xx.h @@ -286,6 +286,24 @@ struct wm97xx { u16 suspend_mode; /* PRP in suspend mode */ }; +struct wm97xx_batt_pdata { + int batt_aux; + int temp_aux; + int charge_gpio; + int min_voltage; + int max_voltage; + int batt_div; + int batt_mult; + int temp_div; + int temp_mult; + int batt_tech; + char *batt_name; +}; + +struct wm97xx_pdata { + struct wm97xx_batt_pdata *batt_pdata; /* battery data */ +}; + /* * Codec GPIO access (not supported on WM9705) * This can be used to set/get codec GPIO and Virtual GPIO status. diff --git a/include/linux/wm97xx_batt.h b/include/linux/wm97xx_batt.h index 9681d1ab0e4f..a1d6419c2ff8 100644 --- a/include/linux/wm97xx_batt.h +++ b/include/linux/wm97xx_batt.h @@ -3,22 +3,12 @@ #include -struct wm97xx_batt_info { - int batt_aux; - int temp_aux; - int charge_gpio; - int min_voltage; - int max_voltage; - int batt_div; - int batt_mult; - int temp_div; - int temp_mult; - int batt_tech; - char *batt_name; -}; +#warning This file will be removed soon, use wm97xx.h instead! + +#define wm97xx_batt_info wm97xx_batt_pdata #ifdef CONFIG_BATTERY_WM97XX -void __init wm97xx_bat_set_pdata(struct wm97xx_batt_info *data); +void wm97xx_bat_set_pdata(struct wm97xx_batt_info *data); #else static inline void wm97xx_bat_set_pdata(struct wm97xx_batt_info *data) {} #endif -- cgit v1.2.3 From 3961f7c3cf247eee5df7fabadc7a40f2deeb98f3 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 10 Aug 2009 17:43:53 +0100 Subject: power_supply: Add driver for the PMU on WM831x PMICs The WM831x PMICs provide power path management from three sources: a wall supply, USB and a battery with integrated charger. They also provide an additional backup supply with integrated for maintaining always on functionality such as the RTC and monitoring of power switches. After some initial configuration at startup the device operates autonomously, the driver simply provides reporting of the current state. Signed-off-by: Mark Brown Signed-off-by: Anton Vorontsov --- drivers/power/Kconfig | 7 + drivers/power/Makefile | 1 + drivers/power/wm831x_power.c | 779 +++++++++++++++++++++++++++++++++++++++++ include/linux/mfd/wm831x/pmu.h | 189 ++++++++++ 4 files changed, 976 insertions(+) create mode 100644 drivers/power/wm831x_power.c create mode 100644 include/linux/mfd/wm831x/pmu.h (limited to 'include') diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index bdbc4f73fcdc..cea6cef27e89 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -29,6 +29,13 @@ config APM_POWER Say Y here to enable support APM status emulation using battery class devices. +config WM831X_POWER + tristate "WM831X PMU support" + depends on MFD_WM831X + help + Say Y here to enable support for the power management unit + provided by Wolfson Microelectronics WM831x PMICs. + config WM8350_POWER tristate "WM8350 PMU support" depends on MFD_WM8350 diff --git a/drivers/power/Makefile b/drivers/power/Makefile index 380d17c9ae29..b96f29d91c28 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_POWER_SUPPLY) += power_supply.o obj-$(CONFIG_PDA_POWER) += pda_power.o obj-$(CONFIG_APM_POWER) += apm_power.o +obj-$(CONFIG_WM831X_POWER) += wm831x_power.o obj-$(CONFIG_WM8350_POWER) += wm8350_power.o obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o diff --git a/drivers/power/wm831x_power.c b/drivers/power/wm831x_power.c new file mode 100644 index 000000000000..2a4c8b0b829c --- /dev/null +++ b/drivers/power/wm831x_power.c @@ -0,0 +1,779 @@ +/* + * PMU driver for Wolfson Microelectronics wm831x PMICs + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include + +#include +#include +#include +#include + +struct wm831x_power { + struct wm831x *wm831x; + struct power_supply wall; + struct power_supply backup; + struct power_supply usb; + struct power_supply battery; +}; + +static int wm831x_power_check_online(struct wm831x *wm831x, int supply, + union power_supply_propval *val) +{ + int ret; + + ret = wm831x_reg_read(wm831x, WM831X_SYSTEM_STATUS); + if (ret < 0) + return ret; + + if (ret & supply) + val->intval = 1; + else + val->intval = 0; + + return 0; +} + +static int wm831x_power_read_voltage(struct wm831x *wm831x, + enum wm831x_auxadc src, + union power_supply_propval *val) +{ + int ret; + + ret = wm831x_auxadc_read_uv(wm831x, src); + if (ret >= 0) + val->intval = ret; + + return ret; +} + +/********************************************************************* + * WALL Power + *********************************************************************/ +static int wm831x_wall_get_prop(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct wm831x_power *wm831x_power = dev_get_drvdata(psy->dev->parent); + struct wm831x *wm831x = wm831x_power->wm831x; + int ret = 0; + + switch (psp) { + case POWER_SUPPLY_PROP_ONLINE: + ret = wm831x_power_check_online(wm831x, WM831X_PWR_WALL, val); + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + ret = wm831x_power_read_voltage(wm831x, WM831X_AUX_WALL, val); + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static enum power_supply_property wm831x_wall_props[] = { + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_VOLTAGE_NOW, +}; + +/********************************************************************* + * USB Power + *********************************************************************/ +static int wm831x_usb_get_prop(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct wm831x_power *wm831x_power = dev_get_drvdata(psy->dev->parent); + struct wm831x *wm831x = wm831x_power->wm831x; + int ret = 0; + + switch (psp) { + case POWER_SUPPLY_PROP_ONLINE: + ret = wm831x_power_check_online(wm831x, WM831X_PWR_USB, val); + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + ret = wm831x_power_read_voltage(wm831x, WM831X_AUX_USB, val); + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static enum power_supply_property wm831x_usb_props[] = { + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_VOLTAGE_NOW, +}; + +/********************************************************************* + * Battery properties + *********************************************************************/ + +struct chg_map { + int val; + int reg_val; +}; + +static struct chg_map trickle_ilims[] = { + { 50, 0 << WM831X_CHG_TRKL_ILIM_SHIFT }, + { 100, 1 << WM831X_CHG_TRKL_ILIM_SHIFT }, + { 150, 2 << WM831X_CHG_TRKL_ILIM_SHIFT }, + { 200, 3 << WM831X_CHG_TRKL_ILIM_SHIFT }, +}; + +static struct chg_map vsels[] = { + { 4050, 0 << WM831X_CHG_VSEL_SHIFT }, + { 4100, 1 << WM831X_CHG_VSEL_SHIFT }, + { 4150, 2 << WM831X_CHG_VSEL_SHIFT }, + { 4200, 3 << WM831X_CHG_VSEL_SHIFT }, +}; + +static struct chg_map fast_ilims[] = { + { 0, 0 << WM831X_CHG_FAST_ILIM_SHIFT }, + { 50, 1 << WM831X_CHG_FAST_ILIM_SHIFT }, + { 100, 2 << WM831X_CHG_FAST_ILIM_SHIFT }, + { 150, 3 << WM831X_CHG_FAST_ILIM_SHIFT }, + { 200, 4 << WM831X_CHG_FAST_ILIM_SHIFT }, + { 250, 5 << WM831X_CHG_FAST_ILIM_SHIFT }, + { 300, 6 << WM831X_CHG_FAST_ILIM_SHIFT }, + { 350, 7 << WM831X_CHG_FAST_ILIM_SHIFT }, + { 400, 8 << WM831X_CHG_FAST_ILIM_SHIFT }, + { 450, 9 << WM831X_CHG_FAST_ILIM_SHIFT }, + { 500, 10 << WM831X_CHG_FAST_ILIM_SHIFT }, + { 600, 11 << WM831X_CHG_FAST_ILIM_SHIFT }, + { 700, 12 << WM831X_CHG_FAST_ILIM_SHIFT }, + { 800, 13 << WM831X_CHG_FAST_ILIM_SHIFT }, + { 900, 14 << WM831X_CHG_FAST_ILIM_SHIFT }, + { 1000, 15 << WM831X_CHG_FAST_ILIM_SHIFT }, +}; + +static struct chg_map eoc_iterms[] = { + { 20, 0 << WM831X_CHG_ITERM_SHIFT }, + { 30, 1 << WM831X_CHG_ITERM_SHIFT }, + { 40, 2 << WM831X_CHG_ITERM_SHIFT }, + { 50, 3 << WM831X_CHG_ITERM_SHIFT }, + { 60, 4 << WM831X_CHG_ITERM_SHIFT }, + { 70, 5 << WM831X_CHG_ITERM_SHIFT }, + { 80, 6 << WM831X_CHG_ITERM_SHIFT }, + { 90, 7 << WM831X_CHG_ITERM_SHIFT }, +}; + +static struct chg_map chg_times[] = { + { 60, 0 << WM831X_CHG_TIME_SHIFT }, + { 90, 1 << WM831X_CHG_TIME_SHIFT }, + { 120, 2 << WM831X_CHG_TIME_SHIFT }, + { 150, 3 << WM831X_CHG_TIME_SHIFT }, + { 180, 4 << WM831X_CHG_TIME_SHIFT }, + { 210, 5 << WM831X_CHG_TIME_SHIFT }, + { 240, 6 << WM831X_CHG_TIME_SHIFT }, + { 270, 7 << WM831X_CHG_TIME_SHIFT }, + { 300, 8 << WM831X_CHG_TIME_SHIFT }, + { 330, 9 << WM831X_CHG_TIME_SHIFT }, + { 360, 10 << WM831X_CHG_TIME_SHIFT }, + { 390, 11 << WM831X_CHG_TIME_SHIFT }, + { 420, 12 << WM831X_CHG_TIME_SHIFT }, + { 450, 13 << WM831X_CHG_TIME_SHIFT }, + { 480, 14 << WM831X_CHG_TIME_SHIFT }, + { 510, 15 << WM831X_CHG_TIME_SHIFT }, +}; + +static void wm831x_battey_apply_config(struct wm831x *wm831x, + struct chg_map *map, int count, int val, + int *reg, const char *name, + const char *units) +{ + int i; + + for (i = 0; i < count; i++) + if (val == map[i].val) + break; + if (i == count) { + dev_err(wm831x->dev, "Invalid %s %d%s\n", + name, val, units); + } else { + *reg |= map[i].reg_val; + dev_dbg(wm831x->dev, "Set %s of %d%s\n", name, val, units); + } +} + +static void wm831x_config_battery(struct wm831x *wm831x) +{ + struct wm831x_pdata *wm831x_pdata = wm831x->dev->platform_data; + struct wm831x_battery_pdata *pdata; + int ret, reg1, reg2; + + if (!wm831x_pdata || !wm831x_pdata->battery) { + dev_warn(wm831x->dev, + "No battery charger configuration\n"); + return; + } + + pdata = wm831x_pdata->battery; + + reg1 = 0; + reg2 = 0; + + if (!pdata->enable) { + dev_info(wm831x->dev, "Battery charger disabled\n"); + return; + } + + reg1 |= WM831X_CHG_ENA; + if (pdata->off_mask) + reg2 |= WM831X_CHG_OFF_MSK; + if (pdata->fast_enable) + reg1 |= WM831X_CHG_FAST; + + wm831x_battey_apply_config(wm831x, trickle_ilims, + ARRAY_SIZE(trickle_ilims), + pdata->trickle_ilim, ®2, + "trickle charge current limit", "mA"); + + wm831x_battey_apply_config(wm831x, vsels, ARRAY_SIZE(vsels), + pdata->vsel, ®2, + "target voltage", "mV"); + + wm831x_battey_apply_config(wm831x, fast_ilims, ARRAY_SIZE(fast_ilims), + pdata->fast_ilim, ®2, + "fast charge current limit", "mA"); + + wm831x_battey_apply_config(wm831x, eoc_iterms, ARRAY_SIZE(eoc_iterms), + pdata->eoc_iterm, ®1, + "end of charge current threshold", "mA"); + + wm831x_battey_apply_config(wm831x, chg_times, ARRAY_SIZE(chg_times), + pdata->timeout, ®2, + "charger timeout", "min"); + + ret = wm831x_reg_unlock(wm831x); + if (ret != 0) { + dev_err(wm831x->dev, "Failed to unlock registers: %d\n", ret); + return; + } + + ret = wm831x_set_bits(wm831x, WM831X_CHARGER_CONTROL_1, + WM831X_CHG_ENA_MASK | + WM831X_CHG_FAST_MASK | + WM831X_CHG_ITERM_MASK | + WM831X_CHG_ITERM_MASK, + reg1); + if (ret != 0) + dev_err(wm831x->dev, "Failed to set charger control 1: %d\n", + ret); + + ret = wm831x_set_bits(wm831x, WM831X_CHARGER_CONTROL_2, + WM831X_CHG_OFF_MSK | + WM831X_CHG_TIME_MASK | + WM831X_CHG_FAST_ILIM_MASK | + WM831X_CHG_TRKL_ILIM_MASK | + WM831X_CHG_VSEL_MASK, + reg2); + if (ret != 0) + dev_err(wm831x->dev, "Failed to set charger control 2: %d\n", + ret); + + wm831x_reg_lock(wm831x); +} + +static int wm831x_bat_check_status(struct wm831x *wm831x, int *status) +{ + int ret; + + ret = wm831x_reg_read(wm831x, WM831X_SYSTEM_STATUS); + if (ret < 0) + return ret; + + if (ret & WM831X_PWR_SRC_BATT) { + *status = POWER_SUPPLY_STATUS_DISCHARGING; + return 0; + } + + ret = wm831x_reg_read(wm831x, WM831X_CHARGER_STATUS); + if (ret < 0) + return ret; + + switch (ret & WM831X_CHG_STATE_MASK) { + case WM831X_CHG_STATE_OFF: + *status = POWER_SUPPLY_STATUS_NOT_CHARGING; + break; + case WM831X_CHG_STATE_TRICKLE: + case WM831X_CHG_STATE_FAST: + *status = POWER_SUPPLY_STATUS_CHARGING; + break; + + default: + *status = POWER_SUPPLY_STATUS_UNKNOWN; + break; + } + + return 0; +} + +static int wm831x_bat_check_type(struct wm831x *wm831x, int *type) +{ + int ret; + + ret = wm831x_reg_read(wm831x, WM831X_CHARGER_STATUS); + if (ret < 0) + return ret; + + switch (ret & WM831X_CHG_STATE_MASK) { + case WM831X_CHG_STATE_TRICKLE: + case WM831X_CHG_STATE_TRICKLE_OT: + *type = POWER_SUPPLY_CHARGE_TYPE_TRICKLE; + break; + case WM831X_CHG_STATE_FAST: + case WM831X_CHG_STATE_FAST_OT: + *type = POWER_SUPPLY_CHARGE_TYPE_FAST; + break; + default: + *type = POWER_SUPPLY_CHARGE_TYPE_NONE; + break; + } + + return 0; +} + +static int wm831x_bat_check_health(struct wm831x *wm831x, int *health) +{ + int ret; + + ret = wm831x_reg_read(wm831x, WM831X_CHARGER_STATUS); + if (ret < 0) + return ret; + + if (ret & WM831X_BATT_HOT_STS) { + *health = POWER_SUPPLY_HEALTH_OVERHEAT; + return 0; + } + + if (ret & WM831X_BATT_COLD_STS) { + *health = POWER_SUPPLY_HEALTH_COLD; + return 0; + } + + if (ret & WM831X_BATT_OV_STS) { + *health = POWER_SUPPLY_HEALTH_OVERVOLTAGE; + return 0; + } + + switch (ret & WM831X_CHG_STATE_MASK) { + case WM831X_CHG_STATE_TRICKLE_OT: + case WM831X_CHG_STATE_FAST_OT: + *health = POWER_SUPPLY_HEALTH_OVERHEAT; + break; + case WM831X_CHG_STATE_DEFECTIVE: + *health = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; + break; + default: + *health = POWER_SUPPLY_HEALTH_GOOD; + break; + } + + return 0; +} + +static int wm831x_bat_get_prop(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct wm831x_power *wm831x_power = dev_get_drvdata(psy->dev->parent); + struct wm831x *wm831x = wm831x_power->wm831x; + int ret = 0; + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + ret = wm831x_bat_check_status(wm831x, &val->intval); + break; + case POWER_SUPPLY_PROP_ONLINE: + ret = wm831x_power_check_online(wm831x, WM831X_PWR_SRC_BATT, + val); + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + ret = wm831x_power_read_voltage(wm831x, WM831X_AUX_BATT, val); + break; + case POWER_SUPPLY_PROP_HEALTH: + ret = wm831x_bat_check_health(wm831x, &val->intval); + break; + case POWER_SUPPLY_PROP_CHARGE_TYPE: + ret = wm831x_bat_check_type(wm831x, &val->intval); + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static enum power_supply_property wm831x_bat_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_CHARGE_TYPE, +}; + +static const char *wm831x_bat_irqs[] = { + "BATT HOT", + "BATT COLD", + "BATT FAIL", + "OV", + "END", + "TO", + "MODE", + "START", +}; + +static irqreturn_t wm831x_bat_irq(int irq, void *data) +{ + struct wm831x_power *wm831x_power = data; + struct wm831x *wm831x = wm831x_power->wm831x; + + dev_dbg(wm831x->dev, "Battery status changed: %d\n", irq); + + /* The battery charger is autonomous so we don't need to do + * anything except kick user space */ + power_supply_changed(&wm831x_power->battery); + + return IRQ_HANDLED; +} + + +/********************************************************************* + * Backup supply properties + *********************************************************************/ + +static void wm831x_config_backup(struct wm831x *wm831x) +{ + struct wm831x_pdata *wm831x_pdata = wm831x->dev->platform_data; + struct wm831x_backup_pdata *pdata; + int ret, reg; + + if (!wm831x_pdata || !wm831x_pdata->backup) { + dev_warn(wm831x->dev, + "No backup battery charger configuration\n"); + return; + } + + pdata = wm831x_pdata->backup; + + reg = 0; + + if (pdata->charger_enable) + reg |= WM831X_BKUP_CHG_ENA | WM831X_BKUP_BATT_DET_ENA; + if (pdata->no_constant_voltage) + reg |= WM831X_BKUP_CHG_MODE; + + switch (pdata->vlim) { + case 2500: + break; + case 3100: + reg |= WM831X_BKUP_CHG_VLIM; + break; + default: + dev_err(wm831x->dev, "Invalid backup voltage limit %dmV\n", + pdata->vlim); + } + + switch (pdata->ilim) { + case 100: + break; + case 200: + reg |= 1; + break; + case 300: + reg |= 2; + break; + case 400: + reg |= 3; + break; + default: + dev_err(wm831x->dev, "Invalid backup current limit %duA\n", + pdata->ilim); + } + + ret = wm831x_reg_unlock(wm831x); + if (ret != 0) { + dev_err(wm831x->dev, "Failed to unlock registers: %d\n", ret); + return; + } + + ret = wm831x_set_bits(wm831x, WM831X_BACKUP_CHARGER_CONTROL, + WM831X_BKUP_CHG_ENA_MASK | + WM831X_BKUP_CHG_MODE_MASK | + WM831X_BKUP_BATT_DET_ENA_MASK | + WM831X_BKUP_CHG_VLIM_MASK | + WM831X_BKUP_CHG_ILIM_MASK, + reg); + if (ret != 0) + dev_err(wm831x->dev, + "Failed to set backup charger config: %d\n", ret); + + wm831x_reg_lock(wm831x); +} + +static int wm831x_backup_get_prop(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct wm831x_power *wm831x_power = dev_get_drvdata(psy->dev->parent); + struct wm831x *wm831x = wm831x_power->wm831x; + int ret = 0; + + ret = wm831x_reg_read(wm831x, WM831X_BACKUP_CHARGER_CONTROL); + if (ret < 0) + return ret; + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + if (ret & WM831X_BKUP_CHG_STS) + val->intval = POWER_SUPPLY_STATUS_CHARGING; + else + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; + break; + + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + ret = wm831x_power_read_voltage(wm831x, WM831X_AUX_BKUP_BATT, + val); + break; + + case POWER_SUPPLY_PROP_PRESENT: + if (ret & WM831X_BKUP_CHG_STS) + val->intval = 1; + else + val->intval = 0; + break; + + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static enum power_supply_property wm831x_backup_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_PRESENT, +}; + +/********************************************************************* + * Initialisation + *********************************************************************/ + +static irqreturn_t wm831x_syslo_irq(int irq, void *data) +{ + struct wm831x_power *wm831x_power = data; + struct wm831x *wm831x = wm831x_power->wm831x; + + /* Not much we can actually *do* but tell people for + * posterity, we're probably about to run out of power. */ + dev_crit(wm831x->dev, "SYSVDD under voltage\n"); + + return IRQ_HANDLED; +} + +static irqreturn_t wm831x_pwr_src_irq(int irq, void *data) +{ + struct wm831x_power *wm831x_power = data; + struct wm831x *wm831x = wm831x_power->wm831x; + + dev_dbg(wm831x->dev, "Power source changed\n"); + + /* Just notify for everything - little harm in overnotifying. + * The backup battery is not a power source while the system + * is running so skip that. + */ + power_supply_changed(&wm831x_power->battery); + power_supply_changed(&wm831x_power->usb); + power_supply_changed(&wm831x_power->wall); + + return IRQ_HANDLED; +} + +static __devinit int wm831x_power_probe(struct platform_device *pdev) +{ + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); + struct wm831x_power *power; + struct power_supply *usb; + struct power_supply *battery; + struct power_supply *wall; + struct power_supply *backup; + int ret, irq, i; + + power = kzalloc(sizeof(struct wm831x_power), GFP_KERNEL); + if (power == NULL) + return -ENOMEM; + + power->wm831x = wm831x; + platform_set_drvdata(pdev, power); + + usb = &power->usb; + battery = &power->battery; + wall = &power->wall; + backup = &power->backup; + + /* We ignore configuration failures since we can still read back + * the status without enabling either of the chargers. + */ + wm831x_config_battery(wm831x); + wm831x_config_backup(wm831x); + + wall->name = "wm831x-wall"; + wall->type = POWER_SUPPLY_TYPE_MAINS; + wall->properties = wm831x_wall_props; + wall->num_properties = ARRAY_SIZE(wm831x_wall_props); + wall->get_property = wm831x_wall_get_prop; + ret = power_supply_register(&pdev->dev, wall); + if (ret) + goto err_kmalloc; + + battery->name = "wm831x-battery"; + battery->properties = wm831x_bat_props; + battery->num_properties = ARRAY_SIZE(wm831x_bat_props); + battery->get_property = wm831x_bat_get_prop; + battery->use_for_apm = 1; + ret = power_supply_register(&pdev->dev, battery); + if (ret) + goto err_wall; + + usb->name = "wm831x-usb", + usb->type = POWER_SUPPLY_TYPE_USB; + usb->properties = wm831x_usb_props; + usb->num_properties = ARRAY_SIZE(wm831x_usb_props); + usb->get_property = wm831x_usb_get_prop; + ret = power_supply_register(&pdev->dev, usb); + if (ret) + goto err_battery; + + backup->name = "wm831x-backup"; + backup->type = POWER_SUPPLY_TYPE_BATTERY; + backup->properties = wm831x_backup_props; + backup->num_properties = ARRAY_SIZE(wm831x_backup_props); + backup->get_property = wm831x_backup_get_prop; + ret = power_supply_register(&pdev->dev, backup); + if (ret) + goto err_usb; + + irq = platform_get_irq_byname(pdev, "SYSLO"); + ret = wm831x_request_irq(wm831x, irq, wm831x_syslo_irq, + IRQF_TRIGGER_RISING, "SYSLO", + power); + if (ret != 0) { + dev_err(&pdev->dev, "Failed to request SYSLO IRQ %d: %d\n", + irq, ret); + goto err_backup; + } + + irq = platform_get_irq_byname(pdev, "PWR SRC"); + ret = wm831x_request_irq(wm831x, irq, wm831x_pwr_src_irq, + IRQF_TRIGGER_RISING, "Power source", + power); + if (ret != 0) { + dev_err(&pdev->dev, "Failed to request PWR SRC IRQ %d: %d\n", + irq, ret); + goto err_syslo; + } + + for (i = 0; i < ARRAY_SIZE(wm831x_bat_irqs); i++) { + irq = platform_get_irq_byname(pdev, wm831x_bat_irqs[i]); + ret = wm831x_request_irq(wm831x, irq, wm831x_bat_irq, + IRQF_TRIGGER_RISING, + wm831x_bat_irqs[i], + power); + if (ret != 0) { + dev_err(&pdev->dev, + "Failed to request %s IRQ %d: %d\n", + wm831x_bat_irqs[i], irq, ret); + goto err_bat_irq; + } + } + + return ret; + +err_bat_irq: + for (; i >= 0; i--) { + irq = platform_get_irq_byname(pdev, wm831x_bat_irqs[i]); + wm831x_free_irq(wm831x, irq, power); + } + irq = platform_get_irq_byname(pdev, "PWR SRC"); + wm831x_free_irq(wm831x, irq, power); +err_syslo: + irq = platform_get_irq_byname(pdev, "SYSLO"); + wm831x_free_irq(wm831x, irq, power); +err_backup: + power_supply_unregister(backup); +err_usb: + power_supply_unregister(usb); +err_battery: + power_supply_unregister(battery); +err_wall: + power_supply_unregister(wall); +err_kmalloc: + kfree(power); + return ret; +} + +static __devexit int wm831x_power_remove(struct platform_device *pdev) +{ + struct wm831x_power *wm831x_power = platform_get_drvdata(pdev); + struct wm831x *wm831x = wm831x_power->wm831x; + int irq, i; + + for (i = 0; i < ARRAY_SIZE(wm831x_bat_irqs); i++) { + irq = platform_get_irq_byname(pdev, wm831x_bat_irqs[i]); + wm831x_free_irq(wm831x, irq, wm831x_power); + } + + irq = platform_get_irq_byname(pdev, "PWR SRC"); + wm831x_free_irq(wm831x, irq, wm831x_power); + + irq = platform_get_irq_byname(pdev, "SYSLO"); + wm831x_free_irq(wm831x, irq, wm831x_power); + + power_supply_unregister(&wm831x_power->backup); + power_supply_unregister(&wm831x_power->battery); + power_supply_unregister(&wm831x_power->wall); + power_supply_unregister(&wm831x_power->usb); + return 0; +} + +static struct platform_driver wm831x_power_driver = { + .probe = wm831x_power_probe, + .remove = __devexit_p(wm831x_power_remove), + .driver = { + .name = "wm831x-power", + }, +}; + +static int __init wm831x_power_init(void) +{ + return platform_driver_register(&wm831x_power_driver); +} +module_init(wm831x_power_init); + +static void __exit wm831x_power_exit(void) +{ + platform_driver_unregister(&wm831x_power_driver); +} +module_exit(wm831x_power_exit); + +MODULE_DESCRIPTION("Power supply driver for WM831x PMICs"); +MODULE_AUTHOR("Mark Brown "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm831x-power"); diff --git a/include/linux/mfd/wm831x/pmu.h b/include/linux/mfd/wm831x/pmu.h new file mode 100644 index 000000000000..b18cbb027bc3 --- /dev/null +++ b/include/linux/mfd/wm831x/pmu.h @@ -0,0 +1,189 @@ +/* + * include/linux/mfd/wm831x/pmu.h -- PMU for WM831x + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __MFD_WM831X_PMU_H__ +#define __MFD_WM831X_PMU_H__ + +/* + * R16387 (0x4003) - Power State + */ +#define WM831X_CHIP_ON 0x8000 /* CHIP_ON */ +#define WM831X_CHIP_ON_MASK 0x8000 /* CHIP_ON */ +#define WM831X_CHIP_ON_SHIFT 15 /* CHIP_ON */ +#define WM831X_CHIP_ON_WIDTH 1 /* CHIP_ON */ +#define WM831X_CHIP_SLP 0x4000 /* CHIP_SLP */ +#define WM831X_CHIP_SLP_MASK 0x4000 /* CHIP_SLP */ +#define WM831X_CHIP_SLP_SHIFT 14 /* CHIP_SLP */ +#define WM831X_CHIP_SLP_WIDTH 1 /* CHIP_SLP */ +#define WM831X_REF_LP 0x1000 /* REF_LP */ +#define WM831X_REF_LP_MASK 0x1000 /* REF_LP */ +#define WM831X_REF_LP_SHIFT 12 /* REF_LP */ +#define WM831X_REF_LP_WIDTH 1 /* REF_LP */ +#define WM831X_PWRSTATE_DLY_MASK 0x0C00 /* PWRSTATE_DLY - [11:10] */ +#define WM831X_PWRSTATE_DLY_SHIFT 10 /* PWRSTATE_DLY - [11:10] */ +#define WM831X_PWRSTATE_DLY_WIDTH 2 /* PWRSTATE_DLY - [11:10] */ +#define WM831X_SWRST_DLY 0x0200 /* SWRST_DLY */ +#define WM831X_SWRST_DLY_MASK 0x0200 /* SWRST_DLY */ +#define WM831X_SWRST_DLY_SHIFT 9 /* SWRST_DLY */ +#define WM831X_SWRST_DLY_WIDTH 1 /* SWRST_DLY */ +#define WM831X_USB100MA_STARTUP_MASK 0x0030 /* USB100MA_STARTUP - [5:4] */ +#define WM831X_USB100MA_STARTUP_SHIFT 4 /* USB100MA_STARTUP - [5:4] */ +#define WM831X_USB100MA_STARTUP_WIDTH 2 /* USB100MA_STARTUP - [5:4] */ +#define WM831X_USB_CURR_STS 0x0008 /* USB_CURR_STS */ +#define WM831X_USB_CURR_STS_MASK 0x0008 /* USB_CURR_STS */ +#define WM831X_USB_CURR_STS_SHIFT 3 /* USB_CURR_STS */ +#define WM831X_USB_CURR_STS_WIDTH 1 /* USB_CURR_STS */ +#define WM831X_USB_ILIM_MASK 0x0007 /* USB_ILIM - [2:0] */ +#define WM831X_USB_ILIM_SHIFT 0 /* USB_ILIM - [2:0] */ +#define WM831X_USB_ILIM_WIDTH 3 /* USB_ILIM - [2:0] */ + +/* + * R16397 (0x400D) - System Status + */ +#define WM831X_THW_STS 0x8000 /* THW_STS */ +#define WM831X_THW_STS_MASK 0x8000 /* THW_STS */ +#define WM831X_THW_STS_SHIFT 15 /* THW_STS */ +#define WM831X_THW_STS_WIDTH 1 /* THW_STS */ +#define WM831X_PWR_SRC_BATT 0x0400 /* PWR_SRC_BATT */ +#define WM831X_PWR_SRC_BATT_MASK 0x0400 /* PWR_SRC_BATT */ +#define WM831X_PWR_SRC_BATT_SHIFT 10 /* PWR_SRC_BATT */ +#define WM831X_PWR_SRC_BATT_WIDTH 1 /* PWR_SRC_BATT */ +#define WM831X_PWR_WALL 0x0200 /* PWR_WALL */ +#define WM831X_PWR_WALL_MASK 0x0200 /* PWR_WALL */ +#define WM831X_PWR_WALL_SHIFT 9 /* PWR_WALL */ +#define WM831X_PWR_WALL_WIDTH 1 /* PWR_WALL */ +#define WM831X_PWR_USB 0x0100 /* PWR_USB */ +#define WM831X_PWR_USB_MASK 0x0100 /* PWR_USB */ +#define WM831X_PWR_USB_SHIFT 8 /* PWR_USB */ +#define WM831X_PWR_USB_WIDTH 1 /* PWR_USB */ +#define WM831X_MAIN_STATE_MASK 0x001F /* MAIN_STATE - [4:0] */ +#define WM831X_MAIN_STATE_SHIFT 0 /* MAIN_STATE - [4:0] */ +#define WM831X_MAIN_STATE_WIDTH 5 /* MAIN_STATE - [4:0] */ + +/* + * R16456 (0x4048) - Charger Control 1 + */ +#define WM831X_CHG_ENA 0x8000 /* CHG_ENA */ +#define WM831X_CHG_ENA_MASK 0x8000 /* CHG_ENA */ +#define WM831X_CHG_ENA_SHIFT 15 /* CHG_ENA */ +#define WM831X_CHG_ENA_WIDTH 1 /* CHG_ENA */ +#define WM831X_CHG_FRC 0x4000 /* CHG_FRC */ +#define WM831X_CHG_FRC_MASK 0x4000 /* CHG_FRC */ +#define WM831X_CHG_FRC_SHIFT 14 /* CHG_FRC */ +#define WM831X_CHG_FRC_WIDTH 1 /* CHG_FRC */ +#define WM831X_CHG_ITERM_MASK 0x1C00 /* CHG_ITERM - [12:10] */ +#define WM831X_CHG_ITERM_SHIFT 10 /* CHG_ITERM - [12:10] */ +#define WM831X_CHG_ITERM_WIDTH 3 /* CHG_ITERM - [12:10] */ +#define WM831X_CHG_FAST 0x0020 /* CHG_FAST */ +#define WM831X_CHG_FAST_MASK 0x0020 /* CHG_FAST */ +#define WM831X_CHG_FAST_SHIFT 5 /* CHG_FAST */ +#define WM831X_CHG_FAST_WIDTH 1 /* CHG_FAST */ +#define WM831X_CHG_IMON_ENA 0x0002 /* CHG_IMON_ENA */ +#define WM831X_CHG_IMON_ENA_MASK 0x0002 /* CHG_IMON_ENA */ +#define WM831X_CHG_IMON_ENA_SHIFT 1 /* CHG_IMON_ENA */ +#define WM831X_CHG_IMON_ENA_WIDTH 1 /* CHG_IMON_ENA */ +#define WM831X_CHG_CHIP_TEMP_MON 0x0001 /* CHG_CHIP_TEMP_MON */ +#define WM831X_CHG_CHIP_TEMP_MON_MASK 0x0001 /* CHG_CHIP_TEMP_MON */ +#define WM831X_CHG_CHIP_TEMP_MON_SHIFT 0 /* CHG_CHIP_TEMP_MON */ +#define WM831X_CHG_CHIP_TEMP_MON_WIDTH 1 /* CHG_CHIP_TEMP_MON */ + +/* + * R16457 (0x4049) - Charger Control 2 + */ +#define WM831X_CHG_OFF_MSK 0x4000 /* CHG_OFF_MSK */ +#define WM831X_CHG_OFF_MSK_MASK 0x4000 /* CHG_OFF_MSK */ +#define WM831X_CHG_OFF_MSK_SHIFT 14 /* CHG_OFF_MSK */ +#define WM831X_CHG_OFF_MSK_WIDTH 1 /* CHG_OFF_MSK */ +#define WM831X_CHG_TIME_MASK 0x0F00 /* CHG_TIME - [11:8] */ +#define WM831X_CHG_TIME_SHIFT 8 /* CHG_TIME - [11:8] */ +#define WM831X_CHG_TIME_WIDTH 4 /* CHG_TIME - [11:8] */ +#define WM831X_CHG_TRKL_ILIM_MASK 0x00C0 /* CHG_TRKL_ILIM - [7:6] */ +#define WM831X_CHG_TRKL_ILIM_SHIFT 6 /* CHG_TRKL_ILIM - [7:6] */ +#define WM831X_CHG_TRKL_ILIM_WIDTH 2 /* CHG_TRKL_ILIM - [7:6] */ +#define WM831X_CHG_VSEL_MASK 0x0030 /* CHG_VSEL - [5:4] */ +#define WM831X_CHG_VSEL_SHIFT 4 /* CHG_VSEL - [5:4] */ +#define WM831X_CHG_VSEL_WIDTH 2 /* CHG_VSEL - [5:4] */ +#define WM831X_CHG_FAST_ILIM_MASK 0x000F /* CHG_FAST_ILIM - [3:0] */ +#define WM831X_CHG_FAST_ILIM_SHIFT 0 /* CHG_FAST_ILIM - [3:0] */ +#define WM831X_CHG_FAST_ILIM_WIDTH 4 /* CHG_FAST_ILIM - [3:0] */ + +/* + * R16458 (0x404A) - Charger Status + */ +#define WM831X_BATT_OV_STS 0x8000 /* BATT_OV_STS */ +#define WM831X_BATT_OV_STS_MASK 0x8000 /* BATT_OV_STS */ +#define WM831X_BATT_OV_STS_SHIFT 15 /* BATT_OV_STS */ +#define WM831X_BATT_OV_STS_WIDTH 1 /* BATT_OV_STS */ +#define WM831X_CHG_STATE_MASK 0x7000 /* CHG_STATE - [14:12] */ +#define WM831X_CHG_STATE_SHIFT 12 /* CHG_STATE - [14:12] */ +#define WM831X_CHG_STATE_WIDTH 3 /* CHG_STATE - [14:12] */ +#define WM831X_BATT_HOT_STS 0x0800 /* BATT_HOT_STS */ +#define WM831X_BATT_HOT_STS_MASK 0x0800 /* BATT_HOT_STS */ +#define WM831X_BATT_HOT_STS_SHIFT 11 /* BATT_HOT_STS */ +#define WM831X_BATT_HOT_STS_WIDTH 1 /* BATT_HOT_STS */ +#define WM831X_BATT_COLD_STS 0x0400 /* BATT_COLD_STS */ +#define WM831X_BATT_COLD_STS_MASK 0x0400 /* BATT_COLD_STS */ +#define WM831X_BATT_COLD_STS_SHIFT 10 /* BATT_COLD_STS */ +#define WM831X_BATT_COLD_STS_WIDTH 1 /* BATT_COLD_STS */ +#define WM831X_CHG_TOPOFF 0x0200 /* CHG_TOPOFF */ +#define WM831X_CHG_TOPOFF_MASK 0x0200 /* CHG_TOPOFF */ +#define WM831X_CHG_TOPOFF_SHIFT 9 /* CHG_TOPOFF */ +#define WM831X_CHG_TOPOFF_WIDTH 1 /* CHG_TOPOFF */ +#define WM831X_CHG_ACTIVE 0x0100 /* CHG_ACTIVE */ +#define WM831X_CHG_ACTIVE_MASK 0x0100 /* CHG_ACTIVE */ +#define WM831X_CHG_ACTIVE_SHIFT 8 /* CHG_ACTIVE */ +#define WM831X_CHG_ACTIVE_WIDTH 1 /* CHG_ACTIVE */ +#define WM831X_CHG_TIME_ELAPSED_MASK 0x00FF /* CHG_TIME_ELAPSED - [7:0] */ +#define WM831X_CHG_TIME_ELAPSED_SHIFT 0 /* CHG_TIME_ELAPSED - [7:0] */ +#define WM831X_CHG_TIME_ELAPSED_WIDTH 8 /* CHG_TIME_ELAPSED - [7:0] */ + +#define WM831X_CHG_STATE_OFF (0 << WM831X_CHG_STATE_SHIFT) +#define WM831X_CHG_STATE_TRICKLE (1 << WM831X_CHG_STATE_SHIFT) +#define WM831X_CHG_STATE_FAST (2 << WM831X_CHG_STATE_SHIFT) +#define WM831X_CHG_STATE_TRICKLE_OT (3 << WM831X_CHG_STATE_SHIFT) +#define WM831X_CHG_STATE_FAST_OT (4 << WM831X_CHG_STATE_SHIFT) +#define WM831X_CHG_STATE_DEFECTIVE (5 << WM831X_CHG_STATE_SHIFT) + +/* + * R16459 (0x404B) - Backup Charger Control + */ +#define WM831X_BKUP_CHG_ENA 0x8000 /* BKUP_CHG_ENA */ +#define WM831X_BKUP_CHG_ENA_MASK 0x8000 /* BKUP_CHG_ENA */ +#define WM831X_BKUP_CHG_ENA_SHIFT 15 /* BKUP_CHG_ENA */ +#define WM831X_BKUP_CHG_ENA_WIDTH 1 /* BKUP_CHG_ENA */ +#define WM831X_BKUP_CHG_STS 0x4000 /* BKUP_CHG_STS */ +#define WM831X_BKUP_CHG_STS_MASK 0x4000 /* BKUP_CHG_STS */ +#define WM831X_BKUP_CHG_STS_SHIFT 14 /* BKUP_CHG_STS */ +#define WM831X_BKUP_CHG_STS_WIDTH 1 /* BKUP_CHG_STS */ +#define WM831X_BKUP_CHG_MODE 0x1000 /* BKUP_CHG_MODE */ +#define WM831X_BKUP_CHG_MODE_MASK 0x1000 /* BKUP_CHG_MODE */ +#define WM831X_BKUP_CHG_MODE_SHIFT 12 /* BKUP_CHG_MODE */ +#define WM831X_BKUP_CHG_MODE_WIDTH 1 /* BKUP_CHG_MODE */ +#define WM831X_BKUP_BATT_DET_ENA 0x0800 /* BKUP_BATT_DET_ENA */ +#define WM831X_BKUP_BATT_DET_ENA_MASK 0x0800 /* BKUP_BATT_DET_ENA */ +#define WM831X_BKUP_BATT_DET_ENA_SHIFT 11 /* BKUP_BATT_DET_ENA */ +#define WM831X_BKUP_BATT_DET_ENA_WIDTH 1 /* BKUP_BATT_DET_ENA */ +#define WM831X_BKUP_BATT_STS 0x0400 /* BKUP_BATT_STS */ +#define WM831X_BKUP_BATT_STS_MASK 0x0400 /* BKUP_BATT_STS */ +#define WM831X_BKUP_BATT_STS_SHIFT 10 /* BKUP_BATT_STS */ +#define WM831X_BKUP_BATT_STS_WIDTH 1 /* BKUP_BATT_STS */ +#define WM831X_BKUP_CHG_VLIM 0x0010 /* BKUP_CHG_VLIM */ +#define WM831X_BKUP_CHG_VLIM_MASK 0x0010 /* BKUP_CHG_VLIM */ +#define WM831X_BKUP_CHG_VLIM_SHIFT 4 /* BKUP_CHG_VLIM */ +#define WM831X_BKUP_CHG_VLIM_WIDTH 1 /* BKUP_CHG_VLIM */ +#define WM831X_BKUP_CHG_ILIM_MASK 0x0003 /* BKUP_CHG_ILIM - [1:0] */ +#define WM831X_BKUP_CHG_ILIM_SHIFT 0 /* BKUP_CHG_ILIM - [1:0] */ +#define WM831X_BKUP_CHG_ILIM_WIDTH 2 /* BKUP_CHG_ILIM - [1:0] */ + +#endif -- cgit v1.2.3