From 436d42c61c3eef1d02256174c8615046c61a28ad Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 24 Aug 2012 15:22:12 +0200 Subject: ARM: samsung: move platform_data definitions Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the samsung include directories Signed-off-by: Arnd Bergmann Acked-by: Mark Brown Acked-by: Greg Kroah-Hartman Acked-by: Nicolas Pitre Acked-by: Mauro Carvalho Chehab Cc: Kukjin Kim Cc: Kyungmin Park Cc: Ben Dooks Cc: Jeff Garzik Cc: Guenter Roeck Cc: "Wolfram Sang (embedded platforms)" Cc: Dmitry Torokhov Cc: Bryan Wu Cc: Richard Purdie Cc: Sylwester Nawrocki Cc: Chris Ball Cc: David Woodhouse Cc: Grant Likely Cc: Felipe Balbi Cc: Alan Stern Cc: Sangbeom Kim Cc: Liam Girdwood Cc: linux-samsung-soc@vger.kernel.org --- include/linux/platform_data/asoc-s3c.h | 59 +++++++++++++++++ include/linux/platform_data/asoc-s3c24xx_simtec.h | 34 ++++++++++ include/linux/platform_data/ata-samsung_cf.h | 36 +++++++++++ include/linux/platform_data/hwmon-s3c.h | 51 +++++++++++++++ include/linux/platform_data/i2c-s3c2410.h | 77 +++++++++++++++++++++++ include/linux/platform_data/leds-s3c24xx.h | 28 +++++++++ include/linux/platform_data/mipi-csis.h | 43 +++++++++++++ include/linux/platform_data/mmc-s3cmci.h | 52 +++++++++++++++ include/linux/platform_data/mtd-nand-s3c2410.h | 67 ++++++++++++++++++++ include/linux/platform_data/spi-s3c64xx.h | 68 ++++++++++++++++++++ include/linux/platform_data/touchscreen-s3c2410.h | 25 ++++++++ include/linux/platform_data/usb-ehci-s5p.h | 21 +++++++ include/linux/platform_data/usb-exynos.h | 21 +++++++ include/linux/platform_data/usb-ohci-s3c2410.h | 43 +++++++++++++ include/linux/platform_data/usb-s3c2410_udc.h | 44 +++++++++++++ 15 files changed, 669 insertions(+) create mode 100644 include/linux/platform_data/asoc-s3c.h create mode 100644 include/linux/platform_data/asoc-s3c24xx_simtec.h create mode 100644 include/linux/platform_data/ata-samsung_cf.h create mode 100644 include/linux/platform_data/hwmon-s3c.h create mode 100644 include/linux/platform_data/i2c-s3c2410.h create mode 100644 include/linux/platform_data/leds-s3c24xx.h create mode 100644 include/linux/platform_data/mipi-csis.h create mode 100644 include/linux/platform_data/mmc-s3cmci.h create mode 100644 include/linux/platform_data/mtd-nand-s3c2410.h create mode 100644 include/linux/platform_data/spi-s3c64xx.h create mode 100644 include/linux/platform_data/touchscreen-s3c2410.h create mode 100644 include/linux/platform_data/usb-ehci-s5p.h create mode 100644 include/linux/platform_data/usb-exynos.h create mode 100644 include/linux/platform_data/usb-ohci-s3c2410.h create mode 100644 include/linux/platform_data/usb-s3c2410_udc.h (limited to 'include') diff --git a/include/linux/platform_data/asoc-s3c.h b/include/linux/platform_data/asoc-s3c.h new file mode 100644 index 000000000000..aa9875f77c40 --- /dev/null +++ b/include/linux/platform_data/asoc-s3c.h @@ -0,0 +1,59 @@ +/* arch/arm/plat-samsung/include/plat/audio.h + * + * Copyright (c) 2009 Samsung Electronics Co. Ltd + * Author: Jaswinder Singh + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* The machine init code calls s3c*_ac97_setup_gpio with + * one of these defines in order to select appropriate bank + * of GPIO for AC97 pins + */ +#define S3C64XX_AC97_GPD 0 +#define S3C64XX_AC97_GPE 1 +extern void s3c64xx_ac97_setup_gpio(int); + +/* + * The machine init code calls s5p*_spdif_setup_gpio with + * one of these defines in order to select appropriate bank + * of GPIO for S/PDIF pins + */ +#define S5PC100_SPDIF_GPD 0 +#define S5PC100_SPDIF_GPG3 1 +extern void s5pc100_spdif_setup_gpio(int); + +struct samsung_i2s { +/* If the Primary DAI has 5.1 Channels */ +#define QUIRK_PRI_6CHAN (1 << 0) +/* If the I2S block has a Stereo Overlay Channel */ +#define QUIRK_SEC_DAI (1 << 1) +/* + * If the I2S block has no internal prescalar or MUX (I2SMOD[10] bit) + * The Machine driver must provide suitably set clock to the I2S block. + */ +#define QUIRK_NO_MUXPSR (1 << 2) +#define QUIRK_NEED_RSTCLR (1 << 3) + /* Quirks of the I2S controller */ + u32 quirks; + + /* + * Array of clock names that can be used to generate I2S signals. + * Also corresponds to clocks of I2SMOD[10] + */ + const char **src_clk; + dma_addr_t idma_addr; +}; + +/** + * struct s3c_audio_pdata - common platform data for audio device drivers + * @cfg_gpio: Callback function to setup mux'ed pins in I2S/PCM/AC97 mode + */ +struct s3c_audio_pdata { + int (*cfg_gpio)(struct platform_device *); + union { + struct samsung_i2s i2s; + } type; +}; diff --git a/include/linux/platform_data/asoc-s3c24xx_simtec.h b/include/linux/platform_data/asoc-s3c24xx_simtec.h new file mode 100644 index 000000000000..376af5286a3e --- /dev/null +++ b/include/linux/platform_data/asoc-s3c24xx_simtec.h @@ -0,0 +1,34 @@ +/* arch/arm/plat-samsung/include/plat/audio-simtec.h + * + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Simtec Audio support. +*/ + +/** + * struct s3c24xx_audio_simtec_pdata - platform data for simtec audio + * @use_mpllin: Select codec clock from MPLLin + * @output_cdclk: Need to output CDCLK to the codec + * @have_mic: Set if we have a MIC socket + * @have_lout: Set if we have a LineOut socket + * @amp_gpio: GPIO pin to enable the AMP + * @amp_gain: Option GPIO to control AMP gain + */ +struct s3c24xx_audio_simtec_pdata { + unsigned int use_mpllin:1; + unsigned int output_cdclk:1; + + unsigned int have_mic:1; + unsigned int have_lout:1; + + int amp_gpio; + int amp_gain[2]; + + void (*startup)(void); +}; diff --git a/include/linux/platform_data/ata-samsung_cf.h b/include/linux/platform_data/ata-samsung_cf.h new file mode 100644 index 000000000000..2a3855a8372a --- /dev/null +++ b/include/linux/platform_data/ata-samsung_cf.h @@ -0,0 +1,36 @@ +/* linux/arch/arm/plat-samsung/include/plat/ata.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung CF-ATA platform_device info + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_ATA_H +#define __ASM_PLAT_ATA_H __FILE__ + +/** + * struct s3c_ide_platdata - S3C IDE driver platform data. + * @setup_gpio: Setup the external GPIO pins to the right state for data + * transfer in true-ide mode. + */ +struct s3c_ide_platdata { + void (*setup_gpio)(void); +}; + +/* + * s3c_ide_set_platdata() - Setup the platform specifc data for IDE driver. + * @pdata: Platform data for IDE driver. + */ +extern void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata); + +/* architecture-specific IDE configuration */ +extern void s3c64xx_ide_setup_gpio(void); +extern void s5pc100_ide_setup_gpio(void); +extern void s5pv210_ide_setup_gpio(void); + +#endif /*__ASM_PLAT_ATA_H */ diff --git a/include/linux/platform_data/hwmon-s3c.h b/include/linux/platform_data/hwmon-s3c.h new file mode 100644 index 000000000000..c167e4429bc7 --- /dev/null +++ b/include/linux/platform_data/hwmon-s3c.h @@ -0,0 +1,51 @@ +/* linux/arch/arm/plat-s3c/include/plat/hwmon.h + * + * Copyright 2005 Simtec Electronics + * Ben Dooks + * http://armlinux.simtec.co.uk/ + * + * S3C - HWMon interface for ADC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_ADC_HWMON_H +#define __ASM_ARCH_ADC_HWMON_H __FILE__ + +/** + * s3c_hwmon_chcfg - channel configuration + * @name: The name to give this channel. + * @mult: Multiply the ADC value read by this. + * @div: Divide the value from the ADC by this. + * + * The value read from the ADC is converted to a value that + * hwmon expects (mV) by result = (value_read * @mult) / @div. + */ +struct s3c_hwmon_chcfg { + const char *name; + unsigned int mult; + unsigned int div; +}; + +/** + * s3c_hwmon_pdata - HWMON platform data + * @in: One configuration for each possible channel used. + */ +struct s3c_hwmon_pdata { + struct s3c_hwmon_chcfg *in[8]; +}; + +/** + * s3c_hwmon_set_platdata - Set platform data for S3C HWMON device + * @pd: Platform data to register to device. + * + * Register the given platform data for use with the S3C HWMON device. + * The call will copy the platform data, so the board definitions can + * make the structure itself __initdata. + */ +extern void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd); + +#endif /* __ASM_ARCH_ADC_HWMON_H */ + diff --git a/include/linux/platform_data/i2c-s3c2410.h b/include/linux/platform_data/i2c-s3c2410.h new file mode 100644 index 000000000000..51d52e767a19 --- /dev/null +++ b/include/linux/platform_data/i2c-s3c2410.h @@ -0,0 +1,77 @@ +/* arch/arm/plat-s3c/include/plat/iic.h + * + * Copyright 2004-2009 Simtec Electronics + * Ben Dooks + * + * S3C - I2C Controller platform_device info + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_IIC_H +#define __ASM_ARCH_IIC_H __FILE__ + +#define S3C_IICFLG_FILTER (1<<0) /* enable s3c2440 filter */ + +/** + * struct s3c2410_platform_i2c - Platform data for s3c I2C. + * @bus_num: The bus number to use (if possible). + * @flags: Any flags for the I2C bus (E.g. S3C_IICFLK_FILTER). + * @slave_addr: The I2C address for the slave device (if enabled). + * @frequency: The desired frequency in Hz of the bus. This is + * guaranteed to not be exceeded. If the caller does + * not care, use zero and the driver will select a + * useful default. + * @sda_delay: The delay (in ns) applied to SDA edges. + * @cfg_gpio: A callback to configure the pins for I2C operation. + */ +struct s3c2410_platform_i2c { + int bus_num; + unsigned int flags; + unsigned int slave_addr; + unsigned long frequency; + unsigned int sda_delay; + + void (*cfg_gpio)(struct platform_device *dev); +}; + +/** + * s3c_i2c0_set_platdata - set platform data for i2c0 device + * @i2c: The platform data to set, or NULL for default data. + * + * Register the given platform data for use with the i2c0 device. This + * call copies the platform data, so the caller can use __initdata for + * their copy. + * + * This call will set cfg_gpio if is null to the default platform + * implementation. + * + * Any user of s3c_device_i2c0 should call this, even if it is with + * NULL to ensure that the device is given the default platform data + * as the driver will no longer carry defaults. + */ +extern void s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *i2c); +extern void s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *i2c); +extern void s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *i2c); +extern void s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *i2c); +extern void s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *i2c); +extern void s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *i2c); +extern void s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *i2c); +extern void s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *i2c); +extern void s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *i2c); + +/* defined by architecture to configure gpio */ +extern void s3c_i2c0_cfg_gpio(struct platform_device *dev); +extern void s3c_i2c1_cfg_gpio(struct platform_device *dev); +extern void s3c_i2c2_cfg_gpio(struct platform_device *dev); +extern void s3c_i2c3_cfg_gpio(struct platform_device *dev); +extern void s3c_i2c4_cfg_gpio(struct platform_device *dev); +extern void s3c_i2c5_cfg_gpio(struct platform_device *dev); +extern void s3c_i2c6_cfg_gpio(struct platform_device *dev); +extern void s3c_i2c7_cfg_gpio(struct platform_device *dev); + +extern struct s3c2410_platform_i2c default_i2c_data; + +#endif /* __ASM_ARCH_IIC_H */ diff --git a/include/linux/platform_data/leds-s3c24xx.h b/include/linux/platform_data/leds-s3c24xx.h new file mode 100644 index 000000000000..d8a7672519b6 --- /dev/null +++ b/include/linux/platform_data/leds-s3c24xx.h @@ -0,0 +1,28 @@ +/* arch/arm/mach-s3c2410/include/mach/leds-gpio.h + * + * Copyright (c) 2006 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C24XX - LEDs GPIO connector + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_LEDSGPIO_H +#define __ASM_ARCH_LEDSGPIO_H "leds-gpio.h" + +#define S3C24XX_LEDF_ACTLOW (1<<0) /* LED is on when GPIO low */ +#define S3C24XX_LEDF_TRISTATE (1<<1) /* tristate to turn off */ + +struct s3c24xx_led_platdata { + unsigned int gpio; + unsigned int flags; + + char *name; + char *def_trigger; +}; + +#endif /* __ASM_ARCH_LEDSGPIO_H */ diff --git a/include/linux/platform_data/mipi-csis.h b/include/linux/platform_data/mipi-csis.h new file mode 100644 index 000000000000..c45b1e8d4c2e --- /dev/null +++ b/include/linux/platform_data/mipi-csis.h @@ -0,0 +1,43 @@ +/* + * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd. + * + * S5P series MIPI CSI slave device support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __PLAT_SAMSUNG_MIPI_CSIS_H_ +#define __PLAT_SAMSUNG_MIPI_CSIS_H_ __FILE__ + +struct platform_device; + +/** + * struct s5p_platform_mipi_csis - platform data for S5P MIPI-CSIS driver + * @clk_rate: bus clock frequency + * @lanes: number of data lanes used + * @alignment: data alignment in bits + * @hs_settle: HS-RX settle time + * @fixed_phy_vdd: false to enable external D-PHY regulator management in the + * driver or true in case this regulator has no enable function + * @phy_enable: pointer to a callback controlling D-PHY enable/reset + */ +struct s5p_platform_mipi_csis { + unsigned long clk_rate; + u8 lanes; + u8 alignment; + u8 hs_settle; + bool fixed_phy_vdd; + int (*phy_enable)(struct platform_device *pdev, bool on); +}; + +/** + * s5p_csis_phy_enable - global MIPI-CSI receiver D-PHY control + * @pdev: MIPI-CSIS platform device + * @on: true to enable D-PHY and deassert its reset + * false to disable D-PHY + */ +int s5p_csis_phy_enable(struct platform_device *pdev, bool on); + +#endif /* __PLAT_SAMSUNG_MIPI_CSIS_H_ */ diff --git a/include/linux/platform_data/mmc-s3cmci.h b/include/linux/platform_data/mmc-s3cmci.h new file mode 100644 index 000000000000..c42d31711944 --- /dev/null +++ b/include/linux/platform_data/mmc-s3cmci.h @@ -0,0 +1,52 @@ +#ifndef _ARCH_MCI_H +#define _ARCH_MCI_H + +/** + * struct s3c24xx_mci_pdata - sd/mmc controller platform data + * @no_wprotect: Set this to indicate there is no write-protect switch. + * @no_detect: Set this if there is no detect switch. + * @wprotect_invert: Invert the default sense of the write protect switch. + * @detect_invert: Invert the default sense of the write protect switch. + * @use_dma: Set to allow the use of DMA. + * @gpio_detect: GPIO number for the card detect line. + * @gpio_wprotect: GPIO number for the write protect line. + * @ocr_avail: The mask of the available power states, non-zero to use. + * @set_power: Callback to control the power mode. + * + * The @gpio_detect is used for card detection when @no_wprotect is unset, + * and the default sense is that 0 returned from gpio_get_value() means + * that a card is inserted. If @detect_invert is set, then the value from + * gpio_get_value() is inverted, which makes 1 mean card inserted. + * + * The driver will use @gpio_wprotect to signal whether the card is write + * protected if @no_wprotect is not set. A 0 returned from gpio_get_value() + * means the card is read/write, and 1 means read-only. The @wprotect_invert + * will invert the value returned from gpio_get_value(). + * + * Card power is set by @ocr_availa, using MCC_VDD_ constants if it is set + * to a non-zero value, otherwise the default of 3.2-3.4V is used. + */ +struct s3c24xx_mci_pdata { + unsigned int no_wprotect:1; + unsigned int no_detect:1; + unsigned int wprotect_invert:1; + unsigned int detect_invert:1; /* set => detect active high */ + unsigned int use_dma:1; + + unsigned int gpio_detect; + unsigned int gpio_wprotect; + unsigned long ocr_avail; + void (*set_power)(unsigned char power_mode, + unsigned short vdd); +}; + +/** + * s3c24xx_mci_set_platdata - set platform data for mmc/sdi device + * @pdata: The platform data + * + * Copy the platform data supplied by @pdata so that this can be marked + * __initdata. + */ +extern void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata); + +#endif /* _ARCH_NCI_H */ diff --git a/include/linux/platform_data/mtd-nand-s3c2410.h b/include/linux/platform_data/mtd-nand-s3c2410.h new file mode 100644 index 000000000000..b64115fa93a4 --- /dev/null +++ b/include/linux/platform_data/mtd-nand-s3c2410.h @@ -0,0 +1,67 @@ +/* arch/arm/mach-s3c2410/include/mach/nand.h + * + * Copyright (c) 2004 Simtec Electronics + * Ben Dooks + * + * S3C2410 - NAND device controller platform_device info + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/** + * struct s3c2410_nand_set - define a set of one or more nand chips + * @disable_ecc: Entirely disable ECC - Dangerous + * @flash_bbt: Openmoko u-boot can create a Bad Block Table + * Setting this flag will allow the kernel to + * look for it at boot time and also skip the NAND + * scan. + * @options: Default value to set into 'struct nand_chip' options. + * @nr_chips: Number of chips in this set + * @nr_partitions: Number of partitions pointed to by @partitions + * @name: Name of set (optional) + * @nr_map: Map for low-layer logical to physical chip numbers (option) + * @partitions: The mtd partition list + * + * define a set of one or more nand chips registered with an unique mtd. Also + * allows to pass flag to the underlying NAND layer. 'disable_ecc' will trigger + * a warning at boot time. + */ +struct s3c2410_nand_set { + unsigned int disable_ecc:1; + unsigned int flash_bbt:1; + + unsigned int options; + int nr_chips; + int nr_partitions; + char *name; + int *nr_map; + struct mtd_partition *partitions; + struct nand_ecclayout *ecc_layout; +}; + +struct s3c2410_platform_nand { + /* timing information for controller, all times in nanoseconds */ + + int tacls; /* time for active CLE/ALE to nWE/nOE */ + int twrph0; /* active time for nWE/nOE */ + int twrph1; /* time for release CLE/ALE from nWE/nOE inactive */ + + unsigned int ignore_unset_ecc:1; + + int nr_sets; + struct s3c2410_nand_set *sets; + + void (*select_chip)(struct s3c2410_nand_set *, + int chip); +}; + +/** + * s3c_nand_set_platdata() - register NAND platform data. + * @nand: The NAND platform data to register with s3c_device_nand. + * + * This function copies the given NAND platform data, @nand and registers + * it with the s3c_device_nand. This allows @nand to be __initdata. +*/ +extern void s3c_nand_set_platdata(struct s3c2410_platform_nand *nand); diff --git a/include/linux/platform_data/spi-s3c64xx.h b/include/linux/platform_data/spi-s3c64xx.h new file mode 100644 index 000000000000..ceba18d23a5a --- /dev/null +++ b/include/linux/platform_data/spi-s3c64xx.h @@ -0,0 +1,68 @@ +/* linux/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h + * + * Copyright (C) 2009 Samsung Electronics Ltd. + * Jaswinder Singh + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __S3C64XX_PLAT_SPI_H +#define __S3C64XX_PLAT_SPI_H + +struct platform_device; + +/** + * struct s3c64xx_spi_csinfo - ChipSelect description + * @fb_delay: Slave specific feedback delay. + * Refer to FB_CLK_SEL register definition in SPI chapter. + * @line: Custom 'identity' of the CS line. + * + * This is per SPI-Slave Chipselect information. + * Allocate and initialize one in machine init code and make the + * spi_board_info.controller_data point to it. + */ +struct s3c64xx_spi_csinfo { + u8 fb_delay; + unsigned line; +}; + +/** + * struct s3c64xx_spi_info - SPI Controller defining structure + * @src_clk_nr: Clock source index for the CLK_CFG[SPI_CLKSEL] field. + * @num_cs: Number of CS this controller emulates. + * @cfg_gpio: Configure pins for this SPI controller. + */ +struct s3c64xx_spi_info { + int src_clk_nr; + int num_cs; + int (*cfg_gpio)(void); +}; + +/** + * s3c64xx_spi_set_platdata - SPI Controller configure callback by the board + * initialization code. + * @cfg_gpio: Pointer to gpio setup function. + * @src_clk_nr: Clock the SPI controller is to use to generate SPI clocks. + * @num_cs: Number of elements in the 'cs' array. + * + * Call this from machine init code for each SPI Controller that + * has some chips attached to it. + */ +extern void s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, + int num_cs); +extern void s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, + int num_cs); +extern void s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, + int num_cs); + +/* defined by architecture to configure gpio */ +extern int s3c64xx_spi0_cfg_gpio(void); +extern int s3c64xx_spi1_cfg_gpio(void); +extern int s3c64xx_spi2_cfg_gpio(void); + +extern struct s3c64xx_spi_info s3c64xx_spi0_pdata; +extern struct s3c64xx_spi_info s3c64xx_spi1_pdata; +extern struct s3c64xx_spi_info s3c64xx_spi2_pdata; +#endif /* __S3C64XX_PLAT_SPI_H */ diff --git a/include/linux/platform_data/touchscreen-s3c2410.h b/include/linux/platform_data/touchscreen-s3c2410.h new file mode 100644 index 000000000000..26fdb22e0fc2 --- /dev/null +++ b/include/linux/platform_data/touchscreen-s3c2410.h @@ -0,0 +1,25 @@ +/* arch/arm/plat-samsung/include/plat/ts.h + * + * Copyright (c) 2005 Arnaud Patard + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARM_TS_H +#define __ASM_ARM_TS_H + +struct s3c2410_ts_mach_info { + int delay; + int presc; + int oversampling_shift; + void (*cfg_gpio)(struct platform_device *dev); +}; + +extern void s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *); + +/* defined by architecture to configure gpio */ +extern void s3c24xx_ts_cfg_gpio(struct platform_device *dev); + +#endif /* __ASM_ARM_TS_H */ diff --git a/include/linux/platform_data/usb-ehci-s5p.h b/include/linux/platform_data/usb-ehci-s5p.h new file mode 100644 index 000000000000..5f28cae18582 --- /dev/null +++ b/include/linux/platform_data/usb-ehci-s5p.h @@ -0,0 +1,21 @@ +/* + * Copyright (C) 2011 Samsung Electronics Co.Ltd + * Author: Joonyoung Shim + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __PLAT_SAMSUNG_EHCI_H +#define __PLAT_SAMSUNG_EHCI_H __FILE__ + +struct s5p_ehci_platdata { + int (*phy_init)(struct platform_device *pdev, int type); + int (*phy_exit)(struct platform_device *pdev, int type); +}; + +extern void s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd); + +#endif /* __PLAT_SAMSUNG_EHCI_H */ diff --git a/include/linux/platform_data/usb-exynos.h b/include/linux/platform_data/usb-exynos.h new file mode 100644 index 000000000000..c256c595be5e --- /dev/null +++ b/include/linux/platform_data/usb-exynos.h @@ -0,0 +1,21 @@ +/* + * Copyright (C) 2011 Samsung Electronics Co.Ltd + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __MACH_EXYNOS_OHCI_H +#define __MACH_EXYNOS_OHCI_H + +struct exynos4_ohci_platdata { + int (*phy_init)(struct platform_device *pdev, int type); + int (*phy_exit)(struct platform_device *pdev, int type); +}; + +extern void exynos4_ohci_set_platdata(struct exynos4_ohci_platdata *pd); + +#endif /* __MACH_EXYNOS_OHCI_H */ diff --git a/include/linux/platform_data/usb-ohci-s3c2410.h b/include/linux/platform_data/usb-ohci-s3c2410.h new file mode 100644 index 000000000000..7fa1fbefc3f2 --- /dev/null +++ b/include/linux/platform_data/usb-ohci-s3c2410.h @@ -0,0 +1,43 @@ +/* arch/arm/plat-samsung/include/plat/usb-control.h + * + * Copyright (c) 2004 Simtec Electronics + * Ben Dooks + * + * S3C - USB host port information + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_USBCONTROL_H +#define __ASM_ARCH_USBCONTROL_H + +#define S3C_HCDFLG_USED (1) + +struct s3c2410_hcd_port { + unsigned char flags; + unsigned char power; + unsigned char oc_status; + unsigned char oc_changed; +}; + +struct s3c2410_hcd_info { + struct usb_hcd *hcd; + struct s3c2410_hcd_port port[2]; + + void (*power_control)(int port, int to); + void (*enable_oc)(struct s3c2410_hcd_info *, int on); + void (*report_oc)(struct s3c2410_hcd_info *, int ports); +}; + +static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports) +{ + if (info->report_oc != NULL) { + (info->report_oc)(info, ports); + } +} + +extern void s3c_ohci_set_platdata(struct s3c2410_hcd_info *info); + +#endif /*__ASM_ARCH_USBCONTROL_H */ diff --git a/include/linux/platform_data/usb-s3c2410_udc.h b/include/linux/platform_data/usb-s3c2410_udc.h new file mode 100644 index 000000000000..de8e2288a509 --- /dev/null +++ b/include/linux/platform_data/usb-s3c2410_udc.h @@ -0,0 +1,44 @@ +/* arch/arm/plat-samsung/include/plat/udc.h + * + * Copyright (c) 2005 Arnaud Patard + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * + * Changelog: + * 14-Mar-2005 RTP Created file + * 02-Aug-2005 RTP File rename + * 07-Sep-2005 BJD Minor cleanups, changed cmd to enum + * 18-Jan-2007 HMW Add per-platform vbus_draw function +*/ + +#ifndef __ASM_ARM_ARCH_UDC_H +#define __ASM_ARM_ARCH_UDC_H + +enum s3c2410_udc_cmd_e { + S3C2410_UDC_P_ENABLE = 1, /* Pull-up enable */ + S3C2410_UDC_P_DISABLE = 2, /* Pull-up disable */ + S3C2410_UDC_P_RESET = 3, /* UDC reset, in case of */ +}; + +struct s3c2410_udc_mach_info { + void (*udc_command)(enum s3c2410_udc_cmd_e); + void (*vbus_draw)(unsigned int ma); + + unsigned int pullup_pin; + unsigned int pullup_pin_inverted; + + unsigned int vbus_pin; + unsigned char vbus_pin_inverted; +}; + +extern void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *); + +struct s3c24xx_hsudc_platdata; + +extern void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd); + +#endif /* __ASM_ARM_ARCH_UDC_H */ -- cgit v1.2.3