From 86d9884b6a3646bc24e57430f1f694c5171c1bf6 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Thu, 6 Aug 2009 19:37:29 +0300 Subject: regulator: Add GPIO enable control to fixed voltage regulator driver Now fixed regulators that have their enable pin connected to a GPIO line can use the fixed regulator driver for regulator enable/disable control. The GPIO number and polarity information is passed through platform data. GPIO enable control is achieved using gpiolib. Signed-off-by: Roger Quadros Reviewed-by: Philipp Zabel Reviewed-by: Felipe Balbi Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- include/linux/regulator/fixed.h | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'include') diff --git a/include/linux/regulator/fixed.h b/include/linux/regulator/fixed.h index 91b4da31f1b5..e94a4a1c7c8a 100644 --- a/include/linux/regulator/fixed.h +++ b/include/linux/regulator/fixed.h @@ -5,6 +5,9 @@ * * Author: Mark Brown * + * Copyright (c) 2009 Nokia Corporation + * Roger Quadros + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the @@ -16,9 +19,30 @@ struct regulator_init_data; +/** + * struct fixed_voltage_config - fixed_voltage_config structure + * @supply_name: Name of the regulator supply + * @microvolts: Output voltage of regulator + * @gpio: GPIO to use for enable control + * set to -EINVAL if not used + * @enable_high: Polarity of enable GPIO + * 1 = Active high, 0 = Active low + * @enabled_at_boot: Whether regulator has been enabled at + * boot or not. 1 = Yes, 0 = No + * This is used to keep the regulator at + * the default state + * @init_data: regulator_init_data + * + * This structure contains fixed voltage regulator configuration + * information that must be passed by platform code to the fixed + * voltage regulator driver. + */ struct fixed_voltage_config { const char *supply_name; int microvolts; + int gpio; + unsigned enable_high:1; + unsigned enabled_at_boot:1; struct regulator_init_data *init_data; }; -- cgit v1.2.3