From 1b227e536662eae4b7beee3037edbecdc577495f Mon Sep 17 00:00:00 2001 From: Haishuang Yan Date: Sat, 21 May 2016 18:17:34 +0800 Subject: ip6_gre: Fix MTU setting for ip6gretap When creat an ip6gretap interface with an unreachable route, the MTU is about 14 bytes larger than what was needed. If the remote address is reachable: ping6 2001:0:130::1 -c 2 PING 2001:0:130::1(2001:0:130::1) 56 data bytes 64 bytes from 2001:0:130::1: icmp_seq=1 ttl=64 time=1.46 ms 64 bytes from 2001:0:130::1: icmp_seq=2 ttl=64 time=81.1 ms Signed-off-by: David S. Miller --- net/ipv6/ip6_gre.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'net') diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c index af503f518278..a6fe3397728c 100644 --- a/net/ipv6/ip6_gre.c +++ b/net/ipv6/ip6_gre.c @@ -1027,6 +1027,8 @@ static int ip6gre_tunnel_init_common(struct net_device *dev) dev->hard_header_len = LL_MAX_HEADER + t_hlen; dev->mtu = ETH_DATA_LEN - t_hlen; + if (dev->type == ARPHRD_ETHER) + dev->mtu -= ETH_HLEN; if (!(tunnel->parms.flags & IP6_TNL_F_IGN_ENCAP_LIMIT)) dev->mtu -= 8; -- cgit v1.2.3