From 6c8ca30eec7b6f8eb09c957e8dcced89e5f100c7 Mon Sep 17 00:00:00 2001 From: Nicolin Chen Date: Wed, 4 Mar 2015 21:05:04 -0800 Subject: ASoC: fsl_ssi: Don't try to round-up for PM divisor calculation According to i.MX6 Series Reference Manual, the formula to calculate the sys clock is sysclk rate = bclk rate * (div2 + 1) * (7 * psr + 1) * (pm + 1) * 2 Commit aafa85e71a75 ("ASoC: fsl_ssi: Add DAI master mode support for SSI on i.MX series") added the divisor calculation which relies on the clk_round_rate(). However, at that time, clk_round_rate() didn't provide closest clock rates for some cases because it might not use a correct rounding policy. So using the original formula (pm + 1) for PM divisor was not able to give us a desired clock rate. And then we used (pm + 2) to do the trick. However, the clk-divider driver has been refined a lot since commit b11d282dbea2 ("clk: divider: fix rate calculation for fractional rates") Now using (pm + 2) trick would result an incorrect clock rate. So this patch fixes the problem by removing the useless trick. Reported-by: Stephane Cerveau Signed-off-by: Nicolin Chen Signed-off-by: Mark Brown --- sound/soc/fsl/fsl_ssi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'sound/soc/fsl/fsl_ssi.c') diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index 134388f7d1b8..7eebc0889c9d 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -603,7 +603,7 @@ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream, factor = (div2 + 1) * (7 * psr + 1) * 2; for (i = 0; i < 255; i++) { - tmprate = freq * factor * (i + 2); + tmprate = freq * factor * (i + 1); if (baudclk_is_used) clkrate = clk_get_rate(ssi_private->baudclk); -- cgit v1.2.3