From 3012f43eaf7592d8121426918e43e3b5db013aff Mon Sep 17 00:00:00 2001 From: Rajashekhara, Sudhakar Date: Wed, 20 Jul 2011 17:36:04 +0530 Subject: ASoC: davinci: fix codec start and stop functions According to DM365 voice codec data sheet at [1], before starting recording or playback, ADC/DAC modules should follow a reset and enable cycle. Writing a 1 to the ADC/DAC bit in the register resets the module and clearing the bit to 0 will enable the module. But the driver seems to be doing the reverse of it. [1] http://focus.ti.com/lit/ug/sprufi9b/sprufi9b.pdf Signed-off-by: Rajashekhara, Sudhakar Acked-by: Liam Girdwood Signed-off-by: Mark Brown Cc: stable@kernel.org --- sound/soc/davinci/davinci-vcif.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'sound/soc') diff --git a/sound/soc/davinci/davinci-vcif.c b/sound/soc/davinci/davinci-vcif.c index 9259f1f34899..c957e9e4a73f 100644 --- a/sound/soc/davinci/davinci-vcif.c +++ b/sound/soc/davinci/davinci-vcif.c @@ -62,9 +62,9 @@ static void davinci_vcif_start(struct snd_pcm_substream *substream) w = readl(davinci_vc->base + DAVINCI_VC_CTRL); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - MOD_REG_BIT(w, DAVINCI_VC_CTRL_RSTDAC, 1); + MOD_REG_BIT(w, DAVINCI_VC_CTRL_RSTDAC, 0); else - MOD_REG_BIT(w, DAVINCI_VC_CTRL_RSTADC, 1); + MOD_REG_BIT(w, DAVINCI_VC_CTRL_RSTADC, 0); writel(w, davinci_vc->base + DAVINCI_VC_CTRL); } @@ -80,9 +80,9 @@ static void davinci_vcif_stop(struct snd_pcm_substream *substream) /* Reset transmitter/receiver and sample rate/frame sync generators */ w = readl(davinci_vc->base + DAVINCI_VC_CTRL); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - MOD_REG_BIT(w, DAVINCI_VC_CTRL_RSTDAC, 0); + MOD_REG_BIT(w, DAVINCI_VC_CTRL_RSTDAC, 1); else - MOD_REG_BIT(w, DAVINCI_VC_CTRL_RSTADC, 0); + MOD_REG_BIT(w, DAVINCI_VC_CTRL_RSTADC, 1); writel(w, davinci_vc->base + DAVINCI_VC_CTRL); } -- cgit v1.2.3