From a2b7b74945dbfe5d734eafe8aa52f9f1f8bc6931 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Sat, 26 Sep 2015 00:12:38 -0400 Subject: tools/power turbostat: SKL: Adjust for TSC difference from base frequency On a Skylake with 1500MHz base frequency, the TSC runs at 1512MHz. This is because the TSC is no longer in the n*100 MHz BCLK domain, but is now in the m*24MHz crystal clock domain. (24 MHz * 63 = 1512 MHz) This adds error to several calculations in turbostat, unless the TSC sample sizes are adjusted for this difference. Note that calculations in the time domain are immune from this issue, as the timing sub-system has already calibrated the TSC against a known wall clock. AVG_MHz = APERF_delta/measurement_interval need no adjustment. APERF_delta is in the BCLK domain, and measurement_interval is in the time domain. TSC_MHz = TSC_delta/measurement_interval needs no adjustment -- as we really do want to report the actual measured TSC delta here, and measurement_interval is in the accurate time domain. %Busy = MPERF_delta/TSC_delta needs adjustment to use TSC_BCLK_DOMAIN_delta. TSC_BCLK_DOMAIN_delta = TSC_delta * base_hz / tsc_hz Bzy_MHz = TSC_delta/APERF_delta/MPERF_delta/measurement_interval need adjustment as above. No other metrics in turbostat need to be adjusted. Before: CPU Avg_MHz %Busy Bzy_MHz TSC_MHz - 550 24.84 2216 1512 0 2191 98.73 2219 1514 2 0 0.01 2130 1512 1 9 0.43 2016 1512 3 2 0.08 2016 1512 After: CPU Avg_MHz %Busy Bzy_MHz TSC_MHz - 550 25.05 2198 1512 0 2190 99.62 2199 1512 2 0 0.01 2152 1512 1 9 0.46 2000 1512 3 2 0.10 2000 1512 Note that in this example, the "Before" Bzy_MHz was reported as exceeding the 2200 max turbo rate. Also, even a pinned spin loop would not be reported as over 99% busy. Signed-off-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 22 ++++++++++++++++++++-- 1 file changed, 20 insertions(+), 2 deletions(-) (limited to 'tools/power') diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index d333c819fa1f..31d756b4ea78 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -74,6 +74,8 @@ unsigned int extra_delta_offset64; unsigned int aperf_mperf_multiplier = 1; int do_smi; double bclk; +double base_hz; +double tsc_tweak = 1.0; unsigned int show_pkg; unsigned int show_core; unsigned int show_cpu; @@ -503,7 +505,7 @@ int format_counters(struct thread_data *t, struct core_data *c, /* %Busy */ if (has_aperf) { if (!skip_c0) - outp += sprintf(outp, "%8.2f", 100.0 * t->mperf/t->tsc); + outp += sprintf(outp, "%8.2f", 100.0 * t->mperf/t->tsc/tsc_tweak); else outp += sprintf(outp, "********"); } @@ -511,7 +513,7 @@ int format_counters(struct thread_data *t, struct core_data *c, /* Bzy_MHz */ if (has_aperf) outp += sprintf(outp, "%8.0f", - 1.0 * t->tsc / units * t->aperf / t->mperf / interval_float); + 1.0 * t->tsc * tsc_tweak / units * t->aperf / t->mperf / interval_float); /* TSC_MHz */ outp += sprintf(outp, "%8.0f", 1.0 * t->tsc/units/interval_float); @@ -1152,6 +1154,19 @@ int slv_pkg_cstate_limits[16] = {PCL__0, PCL__1, PCLRSV, PCLRSV, PCL__4, PCLRSV, int amt_pkg_cstate_limits[16] = {PCL__0, PCL__1, PCL__2, PCLRSV, PCLRSV, PCLRSV, PCL__6, PCL__7, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV}; int phi_pkg_cstate_limits[16] = {PCL__0, PCL__2, PCL_6N, PCL_6R, PCLRSV, PCLRSV, PCLRSV, PCLUNL, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV}; + +static void +calculate_tsc_tweak() +{ + unsigned long long msr; + unsigned int base_ratio; + + get_msr(base_cpu, MSR_NHM_PLATFORM_INFO, &msr); + base_ratio = (msr >> 8) & 0xFF; + base_hz = base_ratio * bclk * 1000000; + tsc_tweak = base_hz / tsc_hz; +} + static void dump_nhm_platform_info(void) { @@ -2773,6 +2788,9 @@ void process_cpuid() if (debug) dump_cstate_pstate_config_info(); + if (has_skl_msrs(family, model)) + calculate_tsc_tweak(); + return; } -- cgit v1.2.3