From 9bae0451b7dcca54db376d2ea2cb8d9fc763a683 Mon Sep 17 00:00:00 2001 From: Petr Machata Date: Wed, 1 Aug 2018 00:39:29 +0200 Subject: selftests: mlxsw: Add test for ip_forward_update_priority Verify that with that sysctl turned off, DSCP prioritization and rewrite works the same way as in qos_dscp_bridge test. However when the sysctl is charged, there should be a reprioritization after routing stage, which will be observed by a different DSCP rewrite on egress. Signed-off-by: Petr Machata Reviewed-by: Ido Schimmel Signed-off-by: David S. Miller --- .../selftests/drivers/net/mlxsw/qos_dscp_router.sh | 233 +++++++++++++++++++++ 1 file changed, 233 insertions(+) create mode 100755 tools/testing/selftests/drivers/net/mlxsw/qos_dscp_router.sh (limited to 'tools/testing/selftests') diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_router.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_router.sh new file mode 100755 index 000000000000..281d90766e12 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_router.sh @@ -0,0 +1,233 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Test for DSCP prioritization in the router. +# +# With ip_forward_update_priority disabled, the packets are expected to keep +# their DSCP (which in this test uses only values 0..7) intact as they are +# forwarded by the switch. That is verified at $h2. ICMP responses are formed +# with the same DSCP as the requests, and likewise pass through the switch +# intact, which is verified at $h1. +# +# With ip_forward_update_priority enabled, router reprioritizes the packets +# according to the table in reprioritize(). Thus, say, DSCP 7 maps to priority +# 4, which on egress maps back to DSCP 4. The response packet then gets +# reprioritized to 6, getting DSCP 6 on egress. +# +# +----------------------+ +----------------------+ +# | H1 | | H2 | +# | + $h1 | | $h2 + | +# | | 192.0.2.1/28 | | 192.0.2.18/28 | | +# +----|-----------------+ +----------------|-----+ +# | | +# +----|----------------------------------------------------------------|-----+ +# | SW | | | +# | + $swp1 $swp2 + | +# | 192.0.2.2/28 192.0.2.17/28 | +# | APP=0,5,0 .. 7,5,7 APP=0,5,0 .. 7,5,7 | +# +---------------------------------------------------------------------------+ + +ALL_TESTS=" + ping_ipv4 + test_update + test_no_update +" + +lib_dir=$(dirname $0)/../../../net/forwarding + +NUM_NETIFS=4 +source $lib_dir/lib.sh + +reprioritize() +{ + local in=$1; shift + + # This is based on rt_tos2priority in include/net/route.h. Assuming 1:1 + # mapping between priorities and TOS, it yields a new priority for a + # packet with ingress priority of $in. + local -a reprio=(0 0 2 2 6 6 4 4) + + echo ${reprio[$in]} +} + +h1_create() +{ + local dscp; + + simple_if_init $h1 192.0.2.1/28 + tc qdisc add dev $h1 clsact + dscp_capture_install $h1 0 + ip route add vrf v$h1 192.0.2.16/28 via 192.0.2.2 +} + +h1_destroy() +{ + ip route del vrf v$h1 192.0.2.16/28 via 192.0.2.2 + dscp_capture_uninstall $h1 0 + tc qdisc del dev $h1 clsact + simple_if_fini $h1 192.0.2.1/28 +} + +h2_create() +{ + simple_if_init $h2 192.0.2.18/28 + tc qdisc add dev $h2 clsact + dscp_capture_install $h2 0 + ip route add vrf v$h2 192.0.2.0/28 via 192.0.2.17 +} + +h2_destroy() +{ + ip route del vrf v$h2 192.0.2.0/28 via 192.0.2.17 + dscp_capture_uninstall $h2 0 + tc qdisc del dev $h2 clsact + simple_if_fini $h2 192.0.2.18/28 +} + +dscp_map() +{ + local base=$1; shift + + for prio in {0..7}; do + echo app=$prio,5,$((base + prio)) + done +} + +switch_create() +{ + simple_if_init $swp1 192.0.2.2/28 + __simple_if_init $swp2 v$swp1 192.0.2.17/28 + + lldptool -T -i $swp1 -V APP $(dscp_map 0) >/dev/null + lldptool -T -i $swp2 -V APP $(dscp_map 0) >/dev/null + lldpad_app_wait_set $swp1 + lldpad_app_wait_set $swp2 +} + +switch_destroy() +{ + lldptool -T -i $swp2 -V APP -d $(dscp_map 0) >/dev/null + lldptool -T -i $swp1 -V APP -d $(dscp_map 0) >/dev/null + lldpad_app_wait_del + + __simple_if_fini $swp2 192.0.2.17/28 + simple_if_fini $swp1 192.0.2.2/28 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + vrf_prepare + + sysctl_set net.ipv4.ip_forward_update_priority 1 + h1_create + h2_create + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + h2_destroy + h1_destroy + sysctl_restore net.ipv4.ip_forward_update_priority + + vrf_cleanup +} + +ping_ipv4() +{ + ping_test $h1 192.0.2.18 +} + +dscp_ping_test() +{ + local vrf_name=$1; shift + local sip=$1; shift + local dip=$1; shift + local prio=$1; shift + local reprio=$1; shift + local dev1=$1; shift + local dev2=$1; shift + + local prio2=$($reprio $prio) # ICMP Request egress prio + local prio3=$($reprio $prio2) # ICMP Response egress prio + + local dscp=$((prio << 2)) # ICMP Request ingress DSCP + local dscp2=$((prio2 << 2)) # ICMP Request egress DSCP + local dscp3=$((prio3 << 2)) # ICMP Response egress DSCP + + RET=0 + + eval "local -A dev1_t0s=($(dscp_fetch_stats $dev1 0))" + eval "local -A dev2_t0s=($(dscp_fetch_stats $dev2 0))" + + ip vrf exec $vrf_name \ + ${PING} -Q $dscp ${sip:+-I $sip} $dip \ + -c 10 -i 0.1 -w 2 &> /dev/null + + eval "local -A dev1_t1s=($(dscp_fetch_stats $dev1 0))" + eval "local -A dev2_t1s=($(dscp_fetch_stats $dev2 0))" + + for i in {0..7}; do + local dscpi=$((i << 2)) + local expect2=0 + local expect3=0 + + if ((i == prio2)); then + expect2=10 + fi + if ((i == prio3)); then + expect3=10 + fi + + local delta=$((dev2_t1s[$i] - dev2_t0s[$i])) + ((expect2 == delta)) + check_err $? "DSCP $dscpi@$dev2: Expected to capture $expect2 packets, got $delta." + + delta=$((dev1_t1s[$i] - dev1_t0s[$i])) + ((expect3 == delta)) + check_err $? "DSCP $dscpi@$dev1: Expected to capture $expect3 packets, got $delta." + done + + log_test "DSCP rewrite: $dscp-(prio $prio2)-$dscp2-(prio $prio3)-$dscp3" +} + +__test_update() +{ + local update=$1; shift + local reprio=$1; shift + + sysctl_restore net.ipv4.ip_forward_update_priority + sysctl_set net.ipv4.ip_forward_update_priority $update + + for prio in {0..7}; do + dscp_ping_test v$h1 192.0.2.1 192.0.2.18 $prio $reprio $h1 $h2 + done +} + +test_update() +{ + __test_update 1 reprioritize +} + +test_no_update() +{ + __test_update 0 echo +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS -- cgit v1.2.3