/* * Copyright 2013 Eukréa Electromatique <eric@eukrea.com> * Copyright 2013 Eukréa Electromatique <denis@eukrea.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ /* * Module contains : i.MX282 + 64MB DDR2 + NAND + Ethernet PHY + RTC */ /dts-v1/; #include "imx28-eukrea-mbmx28lc.dtsi" / { model = "Eukrea Electromatique MBMX283LC"; compatible = "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28"; memory { reg = <0x40000000 0x04000000>; }; }; &gpmi { pinctrl-names = "default"; pinctrl-0 = <&gpmi_pins_a>; status = "okay"; }; &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; status = "okay"; pcf8563: rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; }; }; &mac0 { phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a>; phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; status = "okay"; }; &pinctrl{ pinctrl-names = "default"; pinctrl-0 = <&hog_pins_cpuimx283>; hog_pins_cpuimx283: hog-cpuimx283@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_ENET0_RX_CLK__GPIO_4_13 MX28_PAD_ENET0_TX_CLK__GPIO_4_5 >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_ENABLE>; }; };