/include/ "skeleton.dtsi" #include #include #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) / { compatible = "marvell,kirkwood"; interrupt-parent = <&intc>; cpus { #address-cells = <1>; #size-cells = <0>; cpu@0 { device_type = "cpu"; compatible = "marvell,feroceon"; reg = <0>; clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>; clock-names = "cpu_clk", "ddrclk", "powersave"; }; }; aliases { gpio0 = &gpio0; gpio1 = &gpio1; i2c0 = &i2c0; }; mbus { compatible = "marvell,kirkwood-mbus", "simple-bus"; #address-cells = <2>; #size-cells = <1>; /* If a board file needs to change this ranges it must replace it completely */ ranges = ; controller = <&mbusc>; pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */ pcie-io-aperture = <0xf2000000 0x100000>; /* 1 MiB I/O space */ cesa: crypto@0301 { compatible = "marvell,orion-crypto"; reg = , ; reg-names = "regs", "sram"; interrupts = <22>; clocks = <&gate_clk 17>; status = "okay"; }; nand: nand@012f { #address-cells = <1>; #size-cells = <1>; cle = <0>; ale = <1>; bank-width = <1>; compatible = "marvell,orion-nand"; reg = ; chip-delay = <25>; /* set partition map and/or chip-delay in board dts */ clocks = <&gate_clk 7>; status = "disabled"; }; }; ocp@f1000000 { compatible = "simple-bus"; ranges = <0x00000000 0xf1000000 0x0100000>; #address-cells = <1>; #size-cells = <1>; pinctrl: pin-controller@10000 { /* set compatible property in SoC file */ reg = <0x10000 0x20>; pmx_ge1: pmx-ge1 { marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23", "mpp24", "mpp25", "mpp26", "mpp27", "mpp30", "mpp31", "mpp32", "mpp33"; marvell,function = "ge1"; }; pmx_nand: pmx-nand { marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", "mpp4", "mpp5", "mpp18", "mpp19"; marvell,function = "nand"; }; pmx_spi: pmx-spi { marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3"; marvell,function = "spi"; }; pmx_twsi0: pmx-twsi0 { marvell,pins = "mpp8", "mpp9"; marvell,function = "twsi0"; }; pmx_uart0: pmx-uart0 { marvell,pins = "mpp10", "mpp11"; marvell,function = "uart0"; }; pmx_uart1: pmx-uart1 { marvell,pins = "mpp13", "mpp14"; marvell,function = "uart1"; }; }; core_clk: core-clocks@10030 { compatible = "marvell,kirkwood-core-clock"; reg = <0x10030 0x4>; #clock-cells = <1>; }; spi0: spi@10600 { compatible = "marvell,orion-spi"; #address-cells = <1>; #size-cells = <0>; cell-index = <0>; interrupts = <23>; reg = <0x10600 0x28>; clocks = <&gate_clk 7>; status = "disabled"; }; gpio0: gpio@10100 { compatible = "marvell,orion-gpio"; #gpio-cells = <2>; gpio-controller; reg = <0x10100 0x40>; ngpios = <32>; interrupt-controller; #interrupt-cells = <2>; interrupts = <35>, <36>, <37>, <38>; clocks = <&gate_clk 7>; }; gpio1: gpio@10140 { compatible = "marvell,orion-gpio"; #gpio-cells = <2>; gpio-controller; reg = <0x10140 0x40>; ngpios = <18>; interrupt-controller; #interrupt-cells = <2>; interrupts = <39>, <40>, <41>; clocks = <&gate_clk 7>; }; i2c0: i2c@11000 { compatible = "marvell,mv64xxx-i2c"; reg = <0x11000 0x20>; #address-cells = <1>; #size-cells = <0>; interrupts = <29>; clock-frequency = <100000>; clocks = <&gate_clk 7>; status = "disabled"; }; uart0: serial@12000 { compatible = "ns16550a"; reg = <0x12000 0x100>; reg-shift = <2>; interrupts = <33>; clocks = <&gate_clk 7>; status = "disabled"; }; uart1: serial@12100 { compatible = "ns16550a"; reg = <0x12100 0x100>; reg-shift = <2>; interrupts = <34>; clocks = <&gate_clk 7>; status = "disabled"; }; mbusc: mbus-controller@20000 { compatible = "marvell,mbus-controller"; reg = <0x20000 0x80>, <0x1500 0x20>; }; sysc: system-controller@20000 { compatible = "marvell,orion-system-controller"; reg = <0x20000 0x120>; }; bridge_intc: bridge-interrupt-ctrl@20110 { compatible = "marvell,orion-bridge-intc"; interrupt-controller; #interrupt-cells = <1>; reg = <0x20110 0x8>; interrupts = <1>; marvell,#interrupts = <6>; }; gate_clk: clock-gating-control@2011c { compatible = "marvell,kirkwood-gating-clock"; reg = <0x2011c 0x4>; clocks = <&core_clk 0>; #clock-cells = <1>; }; l2: l2-cache@20128 { compatible = "marvell,kirkwood-cache"; reg = <0x20128 0x4>; }; intc: main-interrupt-ctrl@20200 { compatible = "marvell,orion-intc"; interrupt-controller; #interrupt-cells = <1>; reg = <0x20200 0x10>, <0x20210 0x10>; }; timer: timer@20300 { compatible = "marvell,orion-timer"; reg = <0x20300 0x20>; interrupt-parent = <&bridge_intc>; interrupts = <1>, <2>; clocks = <&core_clk 0>; }; wdt: watchdog-timer@20300 { compatible = "marvell,orion-wdt"; reg = <0x20300 0x28>, <0x20108 0x4>; interrupt-parent = <&bridge_intc>; interrupts = <3>; clocks = <&gate_clk 7>; status = "okay"; }; usb0: ehci@50000 { compatible = "marvell,orion-ehci"; reg = <0x50000 0x1000>; interrupts = <19>; clocks = <&gate_clk 3>; status = "okay"; }; dma0: xor@60800 { compatible = "marvell,orion-xor"; reg = <0x60800 0x100 0x60A00 0x100>; status = "okay"; clocks = <&gate_clk 8>; xor00 { interrupts = <5>; dmacap,memcpy; dmacap,xor; }; xor01 { interrupts = <6>; dmacap,memcpy; dmacap,xor; dmacap,memset; }; }; dma1: xor@60900 { compatible = "marvell,orion-xor"; reg = <0x60900 0x100 0x60B00 0x100>; status = "okay"; clocks = <&gate_clk 16>; xor00 { interrupts = <7>; dmacap,memcpy; dmacap,xor; }; xor01 { interrupts = <8>; dmacap,memcpy; dmacap,xor; dmacap,memset; }; }; eth0: ethernet-controller@72000 { compatible = "marvell,kirkwood-eth"; #address-cells = <1>; #size-cells = <0>; reg = <0x72000 0x4000>; clocks = <&gate_clk 0>; marvell,tx-checksum-limit = <1600>; status = "disabled"; ethernet0-port@0 { compatible = "marvell,kirkwood-eth-port"; reg = <0>; interrupts = <11>; /* overwrite MAC address in bootloader */ local-mac-address = [00 00 00 00 00 00]; /* set phy-handle property in board file */ }; }; mdio: mdio-bus@72004 { compatible = "marvell,orion-mdio"; #address-cells = <1>; #size-cells = <0>; reg = <0x72004 0x84>; interrupts = <46>; clocks = <&gate_clk 0>; status = "disabled"; /* add phy nodes in board file */ }; eth1: ethernet-controller@76000 { compatible = "marvell,kirkwood-eth"; #address-cells = <1>; #size-cells = <0>; reg = <0x76000 0x4000>; clocks = <&gate_clk 19>; marvell,tx-checksum-limit = <1600>; pinctrl-0 = <&pmx_ge1>; pinctrl-names = "default"; status = "disabled"; ethernet1-port@0 { compatible = "marvell,kirkwood-eth-port"; reg = <0>; interrupts = <15>; /* overwrite MAC address in bootloader */ local-mac-address = [00 00 00 00 00 00]; /* set phy-handle property in board file */ }; }; sata_phy0: sata-phy@82000 { compatible = "marvell,mvebu-sata-phy"; reg = <0x82000 0x0334>; clocks = <&gate_clk 14>; clock-names = "sata"; #phy-cells = <0>; status = "ok"; }; sata_phy1: sata-phy@84000 { compatible = "marvell,mvebu-sata-phy"; reg = <0x84000 0x0334>; clocks = <&gate_clk 15>; clock-names = "sata"; #phy-cells = <0>; status = "ok"; }; audio0: audio-controller@a0000 { compatible = "marvell,kirkwood-audio"; reg = <0xa0000 0x2210>; interrupts = <24>; clocks = <&gate_clk 9>; clock-names = "internal"; status = "disabled"; }; }; };