# # For a description of the syntax of this configuration file, # see Documentation/kbuild/kconfig-language.txt. # mainmenu "Linux/M32R Kernel Configuration" config M32R bool default y config SBUS bool config GENERIC_ISA_DMA bool default y config ZONE_DMA bool default y config GENERIC_HARDIRQS bool default y config GENERIC_IRQ_PROBE bool default y config NO_IOPORT def_bool y source "init/Kconfig" menu "Processor type and features" choice prompt "Platform Type" default PLAT_MAPPI config PLAT_MAPPI bool "Mappi-I" help The Mappi-I is an FPGA board for SOC (System-On-a-Chip) prototyping. You can operate a Linux system on this board by using an M32R softmacro core, which is a fully-synthesizable functional model described in Verilog-HDL. The Mappi-I board was the first platform, which had been used to port and develop a Linux system for the M32R processor. Currently, the Mappi-II, an heir to the Mappi-I, is available. config PLAT_USRV bool "uServer" config PLAT_M32700UT bool "M32700UT" help The M3T-M32700UT is an evaluation board based on uT-Engine specification. This board has an M32700 (Chaos) evaluation chip. You can say Y for SMP, because the M32700 is a single chip multiprocessor. config PLAT_OPSPUT bool "OPSPUT" help The OPSPUT is an evaluation board based on uT-Engine specification. This board has a OPSP-REP chip. config PLAT_OAKS32R bool "OAKS32R" help The OAKS32R is a tiny, inexpensive evaluation board. Please note that if you say Y here and choose chip "M32102", say N for MMU and select a no-MMU version kernel, otherwise a kernel with MMU support will not work, because the M32102 is a microcontroller for embedded systems and it has no MMU. config PLAT_MAPPI2 bool "Mappi-II(M3A-ZA36/M3A-ZA52)" config PLAT_MAPPI3 bool "Mappi-III(M3A-2170)" config PLAT_M32104UT bool "M32104UT" help The M3T-M32104UT is an reference board based on uT-Engine specification. This board has a M32104 chip. endchoice choice prompt "Processor family" default CHIP_M32700 config CHIP_M32700 bool "M32700 (Chaos)" config CHIP_M32102 bool "M32102" config CHIP_M32104 bool "M32104" depends on PLAT_M32104UT config CHIP_VDEC2 bool "VDEC2" config CHIP_OPSP bool "OPSP" endchoice config MMU bool "Support for memory management hardware" depends on CHIP_M32700 || CHIP_VDEC2 || CHIP_OPSP default y config TLB_ENTRIES int "TLB Entries" depends on CHIP_M32700 || CHIP_VDEC2 || CHIP_OPSP default 32 if CHIP_M32700 || CHIP_OPSP default 16 if CHIP_VDEC2 config ISA_M32R bool depends on CHIP_M32102 || CHIP_M32104 default y config ISA_M32R2 bool depends on CHIP_M32700 || CHIP_VDEC2 || CHIP_OPSP default y config ISA_DSP_LEVEL2 bool depends on CHIP_M32700 || CHIP_OPSP default y config ISA_DUAL_ISSUE bool depends on CHIP_M32700 || CHIP_OPSP default y config BUS_CLOCK int "Bus Clock [Hz] (integer)" default "70000000" if PLAT_MAPPI default "25000000" if PLAT_USRV default "50000000" if PLAT_MAPPI3 default "50000000" if PLAT_M32700UT default "50000000" if PLAT_OPSPUT default "54000000" if PLAT_M32104UT default "33333333" if PLAT_OAKS32R default "20000000" if PLAT_MAPPI2 config TIMER_DIVIDE int "Timer divider (integer)" default "128" config CPU_LITTLE_ENDIAN bool "Generate little endian code" default n config MEMORY_START hex "Physical memory start address (hex)" default "08000000" if PLAT_MAPPI || PLAT_MAPPI2 || PLAT_MAPPI3 default "08000000" if PLAT_USRV default "08000000" if PLAT_M32700UT default "08000000" if PLAT_OPSPUT default "04000000" if PLAT_M32104UT default "01000000" if PLAT_OAKS32R config MEMORY_SIZE hex "Physical memory size (hex)" default "08000000" if PLAT_MAPPI3 default "04000000" if PLAT_MAPPI || PLAT_MAPPI2 default "02000000" if PLAT_USRV default "01000000" if PLAT_M32700UT default "01000000" if PLAT_OPSPUT default "01000000" if PLAT_M32104UT default "00800000" if PLAT_OAKS32R config NOHIGHMEM bool default y config ARCH_DISCONTIGMEM_ENABLE bool "Internal RAM Support" depends on CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP || CHIP_M32104 default y source "mm/Kconfig" config IRAM_START hex "Internal memory start address (hex)" default "00f00000" if !CHIP_M32104 default "00700000" if CHIP_M32104 depends on (CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP || CHIP_M32104) && DISCONTIGMEM config IRAM_SIZE hex "Internal memory size (hex)" depends on (CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP || CHIP_M32104) && DISCONTIGMEM default "00080000" if CHIP_M32700 default "00010000" if CHIP_M32102 || CHIP_OPSP || CHIP_M32104 default "00008000" if CHIP_VDEC2 # # Define implied options from the CPU selection here # config RWSEM_GENERIC_SPINLOCK bool depends on M32R default y config RWSEM_XCHGADD_ALGORITHM bool default n config ARCH_HAS_ILOG2_U32 bool default n config ARCH_HAS_ILOG2_U64 bool default n config GENERIC_FIND_NEXT_BIT bool default y config GENERIC_HWEIGHT bool default y config GENERIC_CALIBRATE_DELAY bool default y config PREEMPT bool "Preemptible Kernel" help This option reduces the latency of the kernel when reacting to real-time or interactive events by allowing a low priority process to be preempted even if it is in kernel mode executing a system call. This allows applications to run more reliably even when the system is under load. Say Y here if you are building a kernel for a desktop, embedded or real-time system. Say N if you are unsure. config SMP bool "Symmetric multi-processing support" ---help--- This enables support for systems with more than one CPU. If you have a system with only one CPU, like most personal computers, say N. If you have a system with more than one CPU, say Y. If you say N here, the kernel will run on single and multiprocessor machines, but will use only one CPU of a multiprocessor machine. If you say Y here, the kernel will run on many, but not all, singleprocessor machines. On a singleprocessor machine, the kernel will run faster if you say N here. People using multiprocessor machines who say Y here should also say Y to "Enhanced Real Time Clock Support", below. The "Advanced Power Management" code will be disabled if you say Y here. See also the <file:Documentation/smp.txt>, and the SMP-HOWTO available at <http://www.linuxdoc.org/docs.html#howto>. If you don't know what to do here, say N. config CHIP_M32700_TS1 bool "Workaround code for the M32700 TS1 chip's bug" depends on (CHIP_M32700 && SMP) default n config NR_CPUS int "Maximum number of CPUs (2-32)" range 2 32 depends on SMP default "2" help This allows you to specify the maximum number of CPUs which this kernel will support. The maximum supported value is 32 and the minimum value which makes sense is 2. This is purely to save memory - each supported CPU adds approximately eight kilobytes to the kernel image. # Common NUMA Features config NUMA bool "Numa Memory Allocation Support" depends on SMP && BROKEN default n config NODES_SHIFT int default "1" depends on NEED_MULTIPLE_NODES # turning this on wastes a bunch of space. # Summit needs it only when NUMA is on config BOOT_IOREMAP bool depends on NUMA default n endmenu menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)" config PCI bool "PCI support" depends on BROKEN default n help Find out whether you have a PCI motherboard. PCI is the name of a bus system, i.e. the way the CPU talks to the other stuff inside your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or VESA. If you have PCI, say Y, otherwise N. The PCI-HOWTO, available from <http://www.linuxdoc.org/docs.html#howto>, contains valuable information about which PCI hardware does work under Linux and which doesn't. choice prompt "PCI access mode" depends on PCI default PCI_GOANY config PCI_GOBIOS bool "BIOS" ---help--- On PCI systems, the BIOS can be used to detect the PCI devices and determine their configuration. However, some old PCI motherboards have BIOS bugs and may crash if this is done. Also, some embedded PCI-based systems don't have any BIOS at all. Linux can also try to detect the PCI hardware directly without using the BIOS. With this option, you can specify how Linux should detect the PCI devices. If you choose "BIOS", the BIOS will be used, if you choose "Direct", the BIOS won't be used, and if you choose "Any", the kernel will try the direct access method and falls back to the BIOS if that doesn't work. If unsure, go with the default, which is "Any". config PCI_GODIRECT bool "Direct" config PCI_GOANY bool "Any" endchoice config PCI_BIOS bool depends on PCI && (PCI_GOBIOS || PCI_GOANY) default y config PCI_DIRECT bool depends on PCI && (PCI_GODIRECT || PCI_GOANY) default y source "drivers/pci/Kconfig" config ISA bool "ISA support" help Find out whether you have ISA slots on your motherboard. ISA is the name of a bus system, i.e. the way the CPU talks to the other stuff inside your box. If you have ISA, say Y, otherwise N. source "drivers/pcmcia/Kconfig" source "drivers/pci/hotplug/Kconfig" endmenu menu "Executable file formats" source "fs/Kconfig.binfmt" endmenu source "net/Kconfig" source "drivers/Kconfig" source "fs/Kconfig" source "arch/m32r/oprofile/Kconfig" source "arch/m32r/Kconfig.debug" source "security/Kconfig" source "crypto/Kconfig" source "lib/Kconfig"