/* * ITE 8213 IDE driver * * Copyright (C) 2006 Jack Lee * Copyright (C) 2006 Alan Cox * Copyright (C) 2007 Bartlomiej Zolnierkiewicz */ #include <linux/kernel.h> #include <linux/types.h> #include <linux/module.h> #include <linux/pci.h> #include <linux/ide.h> #include <linux/init.h> #define DRV_NAME "it8213" /** * it8213_set_pio_mode - set host controller for PIO mode * @drive: drive * @pio: PIO mode number * * Set the interface PIO mode. */ static void it8213_set_pio_mode(ide_drive_t *drive, const u8 pio) { ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); int is_slave = drive->dn & 1; int master_port = 0x40; int slave_port = 0x44; unsigned long flags; u16 master_data; u8 slave_data; static DEFINE_SPINLOCK(tune_lock); int control = 0; static const u8 timings[][2] = { { 0, 0 }, { 0, 0 }, { 1, 0 }, { 2, 1 }, { 2, 3 }, }; spin_lock_irqsave(&tune_lock, flags); pci_read_config_word(dev, master_port, &master_data); if (pio > 1) control |= 1; /* Programmable timing on */ if (drive->media != ide_disk) control |= 4; /* ATAPI */ if (ide_pio_need_iordy(drive, pio)) control |= 2; /* IORDY */ if (is_slave) { master_data |= 0x4000; master_data &= ~0x0070; if (pio > 1) master_data = master_data | (control << 4); pci_read_config_byte(dev, slave_port, &slave_data); slave_data = slave_data & 0xf0; slave_data = slave_data | (timings[pio][0] << 2) | timings[pio][1]; } else { master_data &= ~0x3307; if (pio > 1) master_data = master_data | control; master_data = master_data | (timings[pio][0] << 12) | (timings[pio][1] << 8); } pci_write_config_word(dev, master_port, master_data); if (is_slave) pci_write_config_byte(dev, slave_port, slave_data); spin_unlock_irqrestore(&tune_lock, flags); } /** * it8213_set_dma_mode - set host controller for DMA mode * @drive: drive * @speed: DMA mode * * Tune the ITE chipset for the DMA mode. */ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); u8 maslave = 0x40; int a_speed = 3 << (drive->dn * 4); int u_flag = 1 << drive->dn; int v_flag = 0x01 << drive->dn; int w_flag = 0x10 << drive->dn; int u_speed = 0; u16 reg4042, reg4a; u8 reg48, reg54, reg55; pci_read_config_word(dev, maslave, ®4042); pci_read_config_byte(dev, 0x48, ®48); pci_read_config_word(dev, 0x4a, ®4a); pci_read_config_byte(dev, 0x54, ®54); pci_read_config_byte(dev, 0x55, ®55); if (speed >= XFER_UDMA_0) { u8 udma = speed - XFER_UDMA_0; u_speed = min_t(u8, 2 - (udma & 1), udma) << (drive->dn * 4); if (!(reg48 & u_flag)) pci_write_config_byte(dev, 0x48, reg48 | u_flag); if (speed >= XFER_UDMA_5) pci_write_config_byte(dev, 0x55, (u8) reg55|w_flag); else pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag); if ((reg4a & a_speed) != u_speed) pci_write_config_word(dev, 0x4a, (reg4a & ~a_speed) | u_speed); if (speed > XFER_UDMA_2) { if (!(reg54 & v_flag)) pci_write_config_byte(dev, 0x54, reg54 | v_flag); } else pci_write_config_byte(dev, 0x54, reg54 & ~v_flag); } else { const u8 mwdma_to_pio[] = { 0, 3, 4 }; u8 pio; if (reg48 & u_flag) pci_write_config_byte(dev, 0x48, reg48 & ~u_flag); if (reg4a & a_speed) pci_write_config_word(dev, 0x4a, reg4a & ~a_speed); if (reg54 & v_flag) pci_write_config_byte(dev, 0x54, reg54 & ~v_flag); if (reg55 & w_flag) pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag); if (speed >= XFER_MW_DMA_0) pio = mwdma_to_pio[speed - XFER_MW_DMA_0]; else pio = 2; /* only SWDMA2 is allowed */ it8213_set_pio_mode(drive, pio); } } static u8 it8213_cable_detect(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); u8 reg42h = 0; pci_read_config_byte(dev, 0x42, ®42h); return (reg42h & 0x02) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; } static const struct ide_port_ops it8213_port_ops = { .set_pio_mode = it8213_set_pio_mode, .set_dma_mode = it8213_set_dma_mode, .cable_detect = it8213_cable_detect, }; static const struct ide_port_info it8213_chipset __devinitdata = { .name = DRV_NAME, .enablebits = { {0x41, 0x80, 0x80} }, .port_ops = &it8213_port_ops, .host_flags = IDE_HFLAG_SINGLE, .pio_mask = ATA_PIO4, .swdma_mask = ATA_SWDMA2_ONLY, .mwdma_mask = ATA_MWDMA12_ONLY, .udma_mask = ATA_UDMA6, }; /** * it8213_init_one - pci layer discovery entry * @dev: PCI device * @id: ident table entry * * Called by the PCI code when it finds an ITE8213 controller. As * this device follows the standard interfaces we can use the * standard helper functions to do almost all the work for us. */ static int __devinit it8213_init_one(struct pci_dev *dev, const struct pci_device_id *id) { return ide_pci_init_one(dev, &it8213_chipset, NULL); } static const struct pci_device_id it8213_pci_tbl[] = { { PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8213), 0 }, { 0, }, }; MODULE_DEVICE_TABLE(pci, it8213_pci_tbl); static struct pci_driver it8213_pci_driver = { .name = "ITE8213_IDE", .id_table = it8213_pci_tbl, .probe = it8213_init_one, .remove = ide_pci_remove, .suspend = ide_pci_suspend, .resume = ide_pci_resume, }; static int __init it8213_ide_init(void) { return ide_pci_register_driver(&it8213_pci_driver); } static void __exit it8213_ide_exit(void) { pci_unregister_driver(&it8213_pci_driver); } module_init(it8213_ide_init); module_exit(it8213_ide_exit); MODULE_AUTHOR("Jack Lee, Alan Cox"); MODULE_DESCRIPTION("PCI driver module for the ITE 8213"); MODULE_LICENSE("GPL");