// SPDX-License-Identifier: GPL-2.0+ // // em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB // video capture devices // // Copyright (C) 2005 Ludovico Cavedon // Markus Rechberger // Mauro Carvalho Chehab // Sascha Sommer // Copyright (C) 2012 Frank Schäfer // // This program is free software; you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by // the Free Software Foundation; either version 2 of the License, or // (at your option) any later version. // // This program is distributed in the hope that it will be useful, // but WITHOUT ANY WARRANTY; without even the implied warranty of // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the // GNU General Public License for more details. #include "em28xx.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define DRIVER_NAME "em28xx" static int tuner = -1; module_param(tuner, int, 0444); MODULE_PARM_DESC(tuner, "tuner type"); static unsigned int disable_ir; module_param(disable_ir, int, 0444); MODULE_PARM_DESC(disable_ir, "disable infrared remote support"); static unsigned int disable_usb_speed_check; module_param(disable_usb_speed_check, int, 0444); MODULE_PARM_DESC(disable_usb_speed_check, "override min bandwidth requirement of 480M bps"); static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = -1U }; module_param_array(card, int, NULL, 0444); MODULE_PARM_DESC(card, "card type"); static int usb_xfer_mode = -1; module_param(usb_xfer_mode, int, 0444); MODULE_PARM_DESC(usb_xfer_mode, "USB transfer mode for frame data (-1 = auto, 0 = prefer isoc, 1 = prefer bulk)"); /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS - 1 */ static DECLARE_BITMAP(em28xx_devused, EM28XX_MAXBOARDS); struct em28xx_hash_table { unsigned long hash; unsigned int model; unsigned int tuner; }; static void em28xx_pre_card_setup(struct em28xx *dev); /* * Reset sequences for analog/digital modes */ /* Reset for the most [analog] boards */ static const struct em28xx_reg_seq default_analog[] = { {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, { -1, -1, -1, -1}, }; /* Reset for the most [digital] boards */ static const struct em28xx_reg_seq default_digital[] = { {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, { -1, -1, -1, -1}, }; /* Board :Zolid Hybrid Tv Stick */ static struct em28xx_reg_seq zolid_tuner[] = { {EM2820_R08_GPIO_CTRL, 0xfd, 0xff, 100}, {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 100}, { -1, -1, -1, -1}, }; static struct em28xx_reg_seq zolid_digital[] = { {EM2820_R08_GPIO_CTRL, 0x6a, 0xff, 100}, {EM2820_R08_GPIO_CTRL, 0x7a, 0xff, 100}, {EM2880_R04_GPO, 0x04, 0xff, 100}, {EM2880_R04_GPO, 0x0c, 0xff, 100}, { -1, -1, -1, -1}, }; /* Board Hauppauge WinTV HVR 900 analog */ static const struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = { {EM2820_R08_GPIO_CTRL, 0x2d, ~EM_GPIO_4, 10}, { 0x05, 0xff, 0x10, 10}, { -1, -1, -1, -1}, }; /* Board Hauppauge WinTV HVR 900 digital */ static const struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = { {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10}, {EM2880_R04_GPO, 0x04, 0x0f, 10}, {EM2880_R04_GPO, 0x0c, 0x0f, 10}, { -1, -1, -1, -1}, }; /* Board Hauppauge WinTV HVR 900 (R2) digital */ static const struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = { {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10}, {EM2880_R04_GPO, 0x0c, 0x0f, 10}, { -1, -1, -1, -1}, }; /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */ static const struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = { {EM2820_R08_GPIO_CTRL, 0x69, ~EM_GPIO_4, 10}, { -1, -1, -1, -1}, }; /* Board - EM2882 Kworld 315U digital */ static const struct em28xx_reg_seq em2882_kworld_315u_digital[] = { {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, {EM2880_R04_GPO, 0x04, 0xff, 10}, {EM2880_R04_GPO, 0x0c, 0xff, 10}, {EM2820_R08_GPIO_CTRL, 0x7e, 0xff, 10}, { -1, -1, -1, -1}, }; static const struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = { {EM2880_R04_GPO, 0x08, 0xff, 10}, {EM2880_R04_GPO, 0x0c, 0xff, 10}, {EM2880_R04_GPO, 0x08, 0xff, 10}, {EM2880_R04_GPO, 0x0c, 0xff, 10}, { -1, -1, -1, -1}, }; static const struct em28xx_reg_seq kworld_330u_analog[] = { {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, {EM2880_R04_GPO, 0x00, 0xff, 10}, { -1, -1, -1, -1}, }; static const struct em28xx_reg_seq kworld_330u_digital[] = { {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, {EM2880_R04_GPO, 0x08, 0xff, 10}, { -1, -1, -1, -1}, }; /* * Evga inDtube * GPIO0 - Enable digital power (s5h1409) - low to enable * GPIO1 - Enable analog power (tvp5150/emp202) - low to enable * GPIO4 - xc3028 reset * GOP3 - s5h1409 reset */ static const struct em28xx_reg_seq evga_indtube_analog[] = { {EM2820_R08_GPIO_CTRL, 0x79, 0xff, 60}, { -1, -1, -1, -1}, }; static const struct em28xx_reg_seq evga_indtube_digital[] = { {EM2820_R08_GPIO_CTRL, 0x7a, 0xff, 1}, {EM2880_R04_GPO, 0x04, 0xff, 10}, {EM2880_R04_GPO, 0x0c, 0xff, 1}, { -1, -1, -1, -1}, }; /* * KWorld PlusTV 340U, UB435-Q and UB435-Q V2 (ATSC) GPIOs map: * EM_GPIO_0 - currently unknown * EM_GPIO_1 - LED disable/enable (1 = off, 0 = on) * EM_GPIO_2 - currently unknown * EM_GPIO_3 - currently unknown * EM_GPIO_4 - TDA18271HD/C1 tuner (1 = active, 0 = in reset) * EM_GPIO_5 - LGDT3304 ATSC/QAM demod (1 = active, 0 = in reset) * EM_GPIO_6 - currently unknown * EM_GPIO_7 - currently unknown */ static const struct em28xx_reg_seq kworld_a340_digital[] = { {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, { -1, -1, -1, -1}, }; static const struct em28xx_reg_seq kworld_ub435q_v3_digital[] = { {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100}, {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 100}, {EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 100}, {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 100}, { -1, -1, -1, -1}, }; /* Pinnacle Hybrid Pro eb1a:2881 */ static const struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = { {EM2820_R08_GPIO_CTRL, 0xfd, ~EM_GPIO_4, 10}, { -1, -1, -1, -1}, }; static const struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = { {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, {EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */ {EM2880_R04_GPO, 0x0c, 0xff, 1}, { -1, -1, -1, -1}, }; static const struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_analog[] = { {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, {EM2880_R04_GPO, 0x00, 0xff, 10}, { -1, -1, -1, -1}, }; static const struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = { {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, {EM2880_R04_GPO, 0x08, 0xff, 10}, { -1, -1, -1, -1}, }; /* * PCTV HD Mini (80e) GPIOs * 0-5: not used * 6: demod reset, active low * 7: LED on, active high */ static const struct em28xx_reg_seq em2874_pctv_80e_digital[] = { {EM28XX_R06_I2C_CLK, 0x45, 0xff, 10}, /*400 KHz*/ {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 100},/*Demod reset*/ {EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 10}, { -1, -1, -1, -1}, }; /* * eb1a:2868 Reddo DVB-C USB TV Box * GPIO4 - CU1216L NIM * Other GPIOs seems to be don't care. */ static const struct em28xx_reg_seq reddo_dvb_c_usb_box[] = { {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, {EM2820_R08_GPIO_CTRL, 0xde, 0xff, 10}, {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, {EM2820_R08_GPIO_CTRL, 0x7f, 0xff, 10}, {EM2820_R08_GPIO_CTRL, 0x6f, 0xff, 10}, {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, { -1, -1, -1, -1}, }; /* Callback for the most boards */ static const struct em28xx_reg_seq default_tuner_gpio[] = { {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10}, {EM2820_R08_GPIO_CTRL, 0, EM_GPIO_4, 10}, {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10}, { -1, -1, -1, -1}, }; /* Mute/unmute */ static const struct em28xx_reg_seq compro_unmute_tv_gpio[] = { {EM2820_R08_GPIO_CTRL, 5, 7, 10}, { -1, -1, -1, -1}, }; static const struct em28xx_reg_seq compro_unmute_svid_gpio[] = { {EM2820_R08_GPIO_CTRL, 4, 7, 10}, { -1, -1, -1, -1}, }; static const struct em28xx_reg_seq compro_mute_gpio[] = { {EM2820_R08_GPIO_CTRL, 6, 7, 10}, { -1, -1, -1, -1}, }; /* Terratec AV350 */ static const struct em28xx_reg_seq terratec_av350_mute_gpio[] = { {EM2820_R08_GPIO_CTRL, 0xff, 0x7f, 10}, { -1, -1, -1, -1}, }; static const struct em28xx_reg_seq terratec_av350_unmute_gpio[] = { {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, { -1, -1, -1, -1}, }; static const struct em28xx_reg_seq silvercrest_reg_seq[] = { {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, {EM2820_R08_GPIO_CTRL, 0x01, 0xf7, 10}, { -1, -1, -1, -1}, }; static const struct em28xx_reg_seq vc211a_enable[] = { {EM2820_R08_GPIO_CTRL, 0xff, 0x07, 10}, {EM2820_R08_GPIO_CTRL, 0xff, 0x0f, 10}, {EM2820_R08_GPIO_CTRL, 0xff, 0x0b, 10}, { -1, -1, -1, -1}, }; static const struct em28xx_reg_seq dikom_dk300_digital[] = { {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, {EM2880_R04_GPO, 0x08, 0xff, 10}, { -1, -1, -1, -1}, }; /* Reset for the most [digital] boards */ static const struct em28xx_reg_seq leadership_digital[] = { {EM2874_R80_GPIO_P0_CTRL, 0x70, 0xff, 10}, { -1, -1, -1, -1}, }; static const struct em28xx_reg_seq leadership_reset[] = { {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10}, {EM2874_R80_GPIO_P0_CTRL, 0xb0, 0xff, 10}, {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10}, { -1, -1, -1, -1}, }; /* * 2013:024f PCTV nanoStick T2 290e * GPIO_6 - demod reset * GPIO_7 - LED */ static const struct em28xx_reg_seq pctv_290e[] = { {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 80}, {EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 80}, /* GPIO_6 = 1 */ {EM2874_R80_GPIO_P0_CTRL, 0xc0, 0xff, 80}, /* GPIO_7 = 1 */ { -1, -1, -1, -1}, }; #if 0 static const struct em28xx_reg_seq terratec_h5_gpio[] = { {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100}, {EM2874_R80_GPIO_P0_CTRL, 0xf2, 0xff, 50}, {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 50}, { -1, -1, -1, -1}, }; static const struct em28xx_reg_seq terratec_h5_digital[] = { {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10}, {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100}, {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10}, { -1, -1, -1, -1}, }; #endif /* * 2013:024f PCTV DVB-S2 Stick 460e * GPIO_0 - POWER_ON * GPIO_1 - BOOST * GPIO_2 - VUV_LNB (red LED) * GPIO_3 - EXT_12V * GPIO_4 - INT_DEM (DEMOD GPIO_0) * GPIO_5 - INT_LNB * GPIO_6 - RESET_DEM * GPIO_7 - LED (green LED) */ static const struct em28xx_reg_seq pctv_460e[] = { {EM2874_R80_GPIO_P0_CTRL, 0x01, 0xff, 50}, { 0x0d, 0xff, 0xff, 50}, {EM2874_R80_GPIO_P0_CTRL, 0x41, 0xff, 50}, /* GPIO_6=1 */ { 0x0d, 0x42, 0xff, 50}, {EM2874_R80_GPIO_P0_CTRL, 0x61, 0xff, 50}, /* GPIO_5=1 */ { -1, -1, -1, -1}, }; static const struct em28xx_reg_seq c3tech_digital_duo_digital[] = { {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10}, {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, /* xc5000 reset */ {EM2874_R80_GPIO_P0_CTRL, 0xf9, 0xff, 35}, {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10}, {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 10}, {EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 10}, {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 20}, { -1, -1, -1, -1}, }; /* * 2013:0258 PCTV DVB-S2 Stick (461e) * GPIO 0 = POWER_ON * GPIO 1 = BOOST * GPIO 2 = VUV_LNB (red LED) * GPIO 3 = #EXT_12V * GPIO 4 = INT_DEM * GPIO 5 = INT_LNB * GPIO 6 = #RESET_DEM * GPIO 7 = P07_LED (green LED) */ static const struct em28xx_reg_seq pctv_461e[] = { {EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 0}, {0x0d, 0xff, 0xff, 0}, {EM2874_R80_GPIO_P0_CTRL, 0x3f, 0xff, 100}, /* reset demod */ {EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 200}, /* reset demod */ {0x0d, 0x42, 0xff, 0}, {EM2874_R80_GPIO_P0_CTRL, 0xeb, 0xff, 0}, {EM2874_R5F_TS_ENABLE, 0x84, 0x84, 0}, /* parallel? | null discard */ { -1, -1, -1, -1}, }; #if 0 static const struct em28xx_reg_seq hauppauge_930c_gpio[] = { {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10}, {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, /* xc5000 reset */ {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10}, {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, { -1, -1, -1, -1}, }; static const struct em28xx_reg_seq hauppauge_930c_digital[] = { {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10}, {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100}, {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10}, { -1, -1, -1, -1}, }; #endif /* * 1b80:e425 MaxMedia UB425-TC * 1b80:e1cc Delock 61959 * GPIO_6 - demod reset, 0=active * GPIO_7 - LED, 0=active */ static const struct em28xx_reg_seq maxmedia_ub425_tc[] = { {EM2874_R80_GPIO_P0_CTRL, 0x83, 0xff, 100}, {EM2874_R80_GPIO_P0_CTRL, 0xc3, 0xff, 100}, /* GPIO_6 = 1 */ {EM2874_R80_GPIO_P0_CTRL, 0x43, 0xff, 000}, /* GPIO_7 = 0 */ { -1, -1, -1, -1}, }; /* * 2304:0242 PCTV QuatroStick (510e) * GPIO_2: decoder reset, 0=active * GPIO_4: decoder suspend, 0=active * GPIO_6: demod reset, 0=active * GPIO_7: LED, 1=active */ static const struct em28xx_reg_seq pctv_510e[] = { {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100}, {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */ {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */ { -1, -1, -1, -1}, }; /* * 2013:0251 PCTV QuatroStick nano (520e) * GPIO_2: decoder reset, 0=active * GPIO_4: decoder suspend, 0=active * GPIO_6: demod reset, 0=active * GPIO_7: LED, 1=active */ static const struct em28xx_reg_seq pctv_520e[] = { {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100}, {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */ {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */ {EM2874_R80_GPIO_P0_CTRL, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */ { -1, -1, -1, -1}, }; /* * 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam * reg 0x80/0x84: * GPIO_0: capturing LED, 0=on, 1=off * GPIO_2: AV mute button, 0=pressed, 1=unpressed * GPIO 3: illumination button, 0=pressed, 1=unpressed * GPIO_6: illumination/flash LED, 0=on, 1=off * reg 0x81/0x85: * GPIO_7: snapshot button, 0=pressed, 1=unpressed */ static const struct em28xx_reg_seq speedlink_vad_laplace_reg_seq[] = { {EM2820_R08_GPIO_CTRL, 0xf7, 0xff, 10}, {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xb2, 10}, { -1, -1, -1, -1}, }; static const struct em28xx_reg_seq pctv_292e[] = { {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, {0x0d, 0xff, 0xff, 950}, {EM2874_R80_GPIO_P0_CTRL, 0xbd, 0xff, 100}, {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 410}, {EM2874_R80_GPIO_P0_CTRL, 0x7d, 0xff, 300}, {EM2874_R80_GPIO_P0_CTRL, 0x7c, 0xff, 60}, {0x0d, 0x42, 0xff, 50}, {EM2874_R5F_TS_ENABLE, 0x85, 0xff, 0}, {-1, -1, -1, -1}, }; static const struct em28xx_reg_seq terratec_t2_stick_hd[] = { {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, {0x0d, 0xff, 0xff, 600}, {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 10}, {EM2874_R80_GPIO_P0_CTRL, 0xbc, 0xff, 100}, {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 100}, {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 300}, {EM2874_R80_GPIO_P0_CTRL, 0xf8, 0xff, 100}, {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 300}, {0x0d, 0x42, 0xff, 1000}, {EM2874_R5F_TS_ENABLE, 0x85, 0xff, 0}, {-1, -1, -1, -1}, }; static const struct em28xx_reg_seq plex_px_bcud[] = { {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, {0x0d, 0xff, 0xff, 0}, {EM2874_R50_IR_CONFIG, 0x01, 0xff, 0}, {EM28XX_R06_I2C_CLK, 0x40, 0xff, 0}, {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 100}, {EM28XX_R12_VINENABLE, 0x20, 0x20, 0}, {0x0d, 0x42, 0xff, 1000}, {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 10}, {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, {0x73, 0xfd, 0xff, 100}, {-1, -1, -1, -1}, }; /* * 2040:0265 Hauppauge WinTV-dualHD DVB Isoc * 2040:8265 Hauppauge WinTV-dualHD DVB Bulk * 2040:026d Hauppauge WinTV-dualHD ATSC/QAM Isoc * 2040:826d Hauppauge WinTV-dualHD ATSC/QAM Bulk * reg 0x80/0x84: * GPIO_0: Yellow LED tuner 1, 0=on, 1=off * GPIO_1: Green LED tuner 1, 0=on, 1=off * GPIO_2: Yellow LED tuner 2, 0=on, 1=off * GPIO_3: Green LED tuner 2, 0=on, 1=off * GPIO_5: Reset #2, 0=active * GPIO_6: Reset #1, 0=active */ static const struct em28xx_reg_seq hauppauge_dualhd_dvb[] = { {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, {0x0d, 0xff, 0xff, 200}, {0x50, 0x04, 0xff, 300}, {EM2874_R80_GPIO_P0_CTRL, 0xbf, 0xff, 100}, /* demod 1 reset */ {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100}, {EM2874_R80_GPIO_P0_CTRL, 0xdf, 0xff, 100}, /* demod 2 reset */ {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100}, {EM2874_R5F_TS_ENABLE, 0x00, 0xff, 50}, /* disable TS filters */ {EM2874_R5D_TS1_PKT_SIZE, 0x05, 0xff, 50}, {EM2874_R5E_TS2_PKT_SIZE, 0x05, 0xff, 50}, {-1, -1, -1, -1}, }; /* * Button definitions */ static const struct em28xx_button std_snapshot_button[] = { { .role = EM28XX_BUTTON_SNAPSHOT, .reg_r = EM28XX_R0C_USBSUSP, .reg_clearing = EM28XX_R0C_USBSUSP, .mask = EM28XX_R0C_USBSUSP_SNAPSHOT, .inverted = 0, }, {-1, 0, 0, 0, 0}, }; static const struct em28xx_button speedlink_vad_laplace_buttons[] = { { .role = EM28XX_BUTTON_SNAPSHOT, .reg_r = EM2874_R85_GPIO_P1_STATE, .mask = 0x80, .inverted = 1, }, { .role = EM28XX_BUTTON_ILLUMINATION, .reg_r = EM2874_R84_GPIO_P0_STATE, .mask = 0x08, .inverted = 1, }, {-1, 0, 0, 0, 0}, }; /* * LED definitions */ static struct em28xx_led speedlink_vad_laplace_leds[] = { { .role = EM28XX_LED_ANALOG_CAPTURING, .gpio_reg = EM2874_R80_GPIO_P0_CTRL, .gpio_mask = 0x01, .inverted = 1, }, { .role = EM28XX_LED_ILLUMINATION, .gpio_reg = EM2874_R80_GPIO_P0_CTRL, .gpio_mask = 0x40, .inverted = 1, }, {-1, 0, 0, 0}, }; static struct em28xx_led kworld_ub435q_v3_leds[] = { { .role = EM28XX_LED_DIGITAL_CAPTURING, .gpio_reg = EM2874_R80_GPIO_P0_CTRL, .gpio_mask = 0x80, .inverted = 1, }, {-1, 0, 0, 0}, }; static struct em28xx_led pctv_80e_leds[] = { { .role = EM28XX_LED_DIGITAL_CAPTURING, .gpio_reg = EM2874_R80_GPIO_P0_CTRL, .gpio_mask = 0x80, .inverted = 0, }, {-1, 0, 0, 0}, }; static struct em28xx_led terratec_grabby_leds[] = { { .role = EM28XX_LED_ANALOG_CAPTURING, .gpio_reg = EM2820_R08_GPIO_CTRL, .gpio_mask = EM_GPIO_3, .inverted = 1, }, {-1, 0, 0, 0}, }; static struct em28xx_led hauppauge_dualhd_leds[] = { { .role = EM28XX_LED_DIGITAL_CAPTURING, .gpio_reg = EM2874_R80_GPIO_P0_CTRL, .gpio_mask = EM_GPIO_1, .inverted = 1, }, { .role = EM28XX_LED_DIGITAL_CAPTURING_TS2, .gpio_reg = EM2874_R80_GPIO_P0_CTRL, .gpio_mask = EM_GPIO_3, .inverted = 1, }, {-1, 0, 0, 0}, }; /* * Board definitions */ const struct em28xx_board em28xx_boards[] = { [EM2750_BOARD_UNKNOWN] = { .name = "EM2710/EM2750/EM2751 webcam grabber", .xclk = EM28XX_XCLK_FREQUENCY_20MHZ, .tuner_type = TUNER_ABSENT, .is_webcam = 1, .input = { { .type = EM28XX_VMUX_COMPOSITE, .vmux = 0, .amux = EM28XX_AMUX_VIDEO, .gpio = silvercrest_reg_seq, } }, }, [EM2800_BOARD_UNKNOWN] = { .name = "Unknown EM2800 video grabber", .is_em2800 = 1, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_SAA711X, .tuner_type = TUNER_ABSENT, .input = { { .type = EM28XX_VMUX_COMPOSITE, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2820_BOARD_UNKNOWN] = { .name = "Unknown EM2750/28xx video grabber", .tuner_type = TUNER_ABSENT, .is_webcam = 1, /* To enable sensor probe */ }, [EM2882_BOARD_ZOLID_HYBRID_TV_STICK] = { .name = ":ZOLID HYBRID TV STICK", .tuner_type = TUNER_XC2028, .tuner_gpio = zolid_tuner, .decoder = EM28XX_TVP5150, .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, .mts_firmware = 1, .has_dvb = 1, .dvb_gpio = zolid_digital, }, [EM2750_BOARD_DLCW_130] = { /* Beijing Huaqi Information Digital Technology Co., Ltd */ .name = "Huaqi DLCW-130", .valid = EM28XX_BOARD_NOT_VALIDATED, .xclk = EM28XX_XCLK_FREQUENCY_48MHZ, .tuner_type = TUNER_ABSENT, .is_webcam = 1, .input = { { .type = EM28XX_VMUX_COMPOSITE, .vmux = 0, .amux = EM28XX_AMUX_VIDEO, } }, }, [EM2820_BOARD_KWORLD_PVRTV2800RF] = { .name = "Kworld PVR TV 2800 RF", .tuner_type = TUNER_TEMIC_PAL, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_COMPOSITE, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2820_BOARD_GADMEI_TVR200] = { .name = "Gadmei TVR200", .tuner_type = TUNER_LG_PAL_NEW_TAPC, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = SAA7115_COMPOSITE2, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2820_BOARD_TERRATEC_CINERGY_250] = { .name = "Terratec Cinergy 250 USB", .tuner_type = TUNER_LG_PAL_NEW_TAPC, .has_ir_i2c = 1, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = SAA7115_COMPOSITE2, .amux = EM28XX_AMUX_VIDEO, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2820_BOARD_PINNACLE_USB_2] = { .name = "Pinnacle PCTV USB 2", .tuner_type = TUNER_LG_PAL_NEW_TAPC, .has_ir_i2c = 1, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = SAA7115_COMPOSITE2, .amux = EM28XX_AMUX_VIDEO, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = { .name = "Hauppauge WinTV USB 2", .tuner_type = TUNER_PHILIPS_FM1236_MK3, .tda9887_conf = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE | TDA9887_PORT2_ACTIVE, .decoder = EM28XX_TVP5150, .has_msp34xx = 1, .has_ir_i2c = 1, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = MSP_INPUT_DEFAULT, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1, MSP_DSP_IN_SCART, MSP_DSP_IN_SCART), } }, }, [EM2820_BOARD_DLINK_USB_TV] = { .name = "D-Link DUB-T210 TV Tuner", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_LG_PAL_NEW_TAPC, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = SAA7115_COMPOSITE2, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2820_BOARD_HERCULES_SMART_TV_USB2] = { .name = "Hercules Smart TV USB 2.0", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_LG_PAL_NEW_TAPC, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = SAA7115_COMPOSITE2, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = { .name = "Pinnacle PCTV USB 2 (Philips FM1216ME)", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = SAA7115_COMPOSITE2, .amux = EM28XX_AMUX_VIDEO, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2820_BOARD_GADMEI_UTV310] = { .name = "Gadmei UTV310", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_TNF_5335MF, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = SAA7115_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = { .name = "Leadtek Winfast USB II Deluxe", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, .has_ir_i2c = 1, .tvaudio_addr = 0x58, .tda9887_conf = TDA9887_PRESENT | TDA9887_PORT2_ACTIVE | TDA9887_QSS, .decoder = EM28XX_SAA711X, .adecoder = EM28XX_TVAUDIO, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = SAA7115_COMPOSITE4, .amux = EM28XX_AMUX_AUX, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = SAA7115_COMPOSITE5, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, .radio = { .type = EM28XX_RADIO, .amux = EM28XX_AMUX_AUX, } }, [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = { .name = "Videology 20K14XUSB USB2.0", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_ABSENT, .is_webcam = 1, .input = { { .type = EM28XX_VMUX_COMPOSITE, .vmux = 0, .amux = EM28XX_AMUX_VIDEO, } }, }, [EM2820_BOARD_SILVERCREST_WEBCAM] = { .name = "Silvercrest Webcam 1.3mpix", .tuner_type = TUNER_ABSENT, .is_webcam = 1, .input = { { .type = EM28XX_VMUX_COMPOSITE, .vmux = 0, .amux = EM28XX_AMUX_VIDEO, .gpio = silvercrest_reg_seq, } }, }, [EM2821_BOARD_SUPERCOMP_USB_2] = { .name = "Supercomp USB 2.0 TV", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_PHILIPS_FM1236_MK3, .tda9887_conf = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE | TDA9887_PORT2_ACTIVE, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = SAA7115_COMPOSITE2, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2821_BOARD_USBGEAR_VD204] = { .name = "Usbgear VD204v9", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_ABSENT, /* Capture only device */ .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_COMPOSITE, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2860_BOARD_NETGMBH_CAM] = { /* Beijing Huaqi Information Digital Technology Co., Ltd */ .name = "NetGMBH Cam", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_ABSENT, .is_webcam = 1, .input = { { .type = EM28XX_VMUX_COMPOSITE, .vmux = 0, .amux = EM28XX_AMUX_VIDEO, } }, }, [EM2860_BOARD_TYPHOON_DVD_MAKER] = { .name = "Typhoon DVD Maker", .decoder = EM28XX_SAA711X, .tuner_type = TUNER_ABSENT, /* Capture only device */ .input = { { .type = EM28XX_VMUX_COMPOSITE, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2860_BOARD_GADMEI_UTV330] = { .name = "Gadmei UTV330", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_TNF_5335MF, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = SAA7115_COMPOSITE2, .amux = EM28XX_AMUX_VIDEO, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2861_BOARD_GADMEI_UTV330PLUS] = { .name = "Gadmei UTV330+", .tuner_type = TUNER_TNF_5335MF, .tda9887_conf = TDA9887_PRESENT, .ir_codes = RC_MAP_GADMEI_RM008Z, .decoder = EM28XX_SAA711X, .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = SAA7115_COMPOSITE2, .amux = EM28XX_AMUX_VIDEO, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2860_BOARD_TERRATEC_HYBRID_XS] = { .name = "Terratec Cinergy A Hybrid XS", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = hauppauge_wintv_hvr_900_analog, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = hauppauge_wintv_hvr_900_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = hauppauge_wintv_hvr_900_analog, } }, }, [EM2861_BOARD_KWORLD_PVRTV_300U] = { .name = "KWorld PVRTV 300U", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = { .name = "Yakumo MovieMixer", .tuner_type = TUNER_ABSENT, /* Capture only device */ .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2860_BOARD_TVP5150_REFERENCE_DESIGN] = { .name = "EM2860/TVP5150 Reference Design", .tuner_type = TUNER_ABSENT, /* Capture only device */ .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_COMPOSITE, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2861_BOARD_PLEXTOR_PX_TV100U] = { .name = "Plextor ConvertX PX-TV100U", .tuner_type = TUNER_TNF_5335MF, .xclk = EM28XX_XCLK_I2S_MSB_TIMING | EM28XX_XCLK_FREQUENCY_12MHZ, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_TVP5150, .has_msp34xx = 1, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, .gpio = pinnacle_hybrid_pro_analog, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = pinnacle_hybrid_pro_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = pinnacle_hybrid_pro_analog, } }, }, /* Those boards with em2870 are DVB Only*/ [EM2870_BOARD_TERRATEC_XS] = { .name = "Terratec Cinergy T XS", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, }, [EM2870_BOARD_TERRATEC_XS_MT2060] = { .name = "Terratec Cinergy T XS (MT2060)", .xclk = EM28XX_XCLK_IR_RC5_MODE | EM28XX_XCLK_FREQUENCY_12MHZ, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, .tuner_type = TUNER_ABSENT, /* MT2060 */ .has_dvb = 1, .tuner_gpio = default_tuner_gpio, }, [EM2870_BOARD_KWORLD_350U] = { .name = "Kworld 350 U DVB-T", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, }, [EM2870_BOARD_KWORLD_355U] = { .name = "Kworld 355 U DVB-T", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_ABSENT, .tuner_gpio = default_tuner_gpio, .has_dvb = 1, .dvb_gpio = default_digital, }, [EM2870_BOARD_PINNACLE_PCTV_DVB] = { .name = "Pinnacle PCTV DVB-T", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_ABSENT, /* MT2060 */ /* djh - I have serious doubts this is right... */ .xclk = EM28XX_XCLK_IR_RC5_MODE | EM28XX_XCLK_FREQUENCY_10MHZ, }, [EM2870_BOARD_COMPRO_VIDEOMATE] = { .name = "Compro, VideoMate U3", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_ABSENT, /* MT2060 */ }, [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = { .name = "Terratec Hybrid XS Secam", .has_msp34xx = 1, .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, .has_dvb = 1, .dvb_gpio = terratec_cinergy_USB_XS_FR_digital, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = terratec_cinergy_USB_XS_FR_analog, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = terratec_cinergy_USB_XS_FR_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = terratec_cinergy_USB_XS_FR_analog, } }, }, [EM2884_BOARD_TERRATEC_H5] = { .name = "Terratec Cinergy H5", .has_dvb = 1, #if 0 .tuner_type = TUNER_PHILIPS_TDA8290, .tuner_addr = 0x41, .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */ .tuner_gpio = terratec_h5_gpio, #else .tuner_type = TUNER_ABSENT, #endif .def_i2c_bus = 1, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, }, [EM2884_BOARD_TERRATEC_H6] = { .name = "Terratec Cinergy H6 rev. 2", .has_dvb = 1, .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, #if 0 .tuner_type = TUNER_PHILIPS_TDA8290, .tuner_addr = 0x41, .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */ .tuner_gpio = terratec_h5_gpio, #else .tuner_type = TUNER_ABSENT, #endif .def_i2c_bus = 1, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, }, [EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = { .name = "Hauppauge WinTV HVR 930C", .has_dvb = 1, #if 0 /* FIXME: Add analog support */ .tuner_type = TUNER_XC5000, .tuner_addr = 0x41, .dvb_gpio = hauppauge_930c_digital, .tuner_gpio = hauppauge_930c_gpio, #else .tuner_type = TUNER_ABSENT, #endif .ir_codes = RC_MAP_HAUPPAUGE, .def_i2c_bus = 1, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, }, [EM2884_BOARD_C3TECH_DIGITAL_DUO] = { .name = "C3 Tech Digital Duo HDTV/SDTV USB", .has_dvb = 1, /* FIXME: Add analog support - need a saa7136 driver */ .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */ .ir_codes = RC_MAP_EMPTY, .def_i2c_bus = 1, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, .dvb_gpio = c3tech_digital_duo_digital, }, [EM2884_BOARD_CINERGY_HTC_STICK] = { .name = "Terratec Cinergy HTC Stick", .has_dvb = 1, .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, .tuner_type = TUNER_ABSENT, .def_i2c_bus = 1, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, }, [EM2884_BOARD_ELGATO_EYETV_HYBRID_2008] = { .name = "Elgato EyeTV Hybrid 2008 INT", .has_dvb = 1, .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, .tuner_type = TUNER_ABSENT, .def_i2c_bus = 1, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, }, [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = { .name = "Hauppauge WinTV HVR 900", .tda9887_conf = TDA9887_PRESENT, .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .mts_firmware = 1, .has_dvb = 1, .dvb_gpio = hauppauge_wintv_hvr_900_digital, .ir_codes = RC_MAP_HAUPPAUGE, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = hauppauge_wintv_hvr_900_analog, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = hauppauge_wintv_hvr_900_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = hauppauge_wintv_hvr_900_analog, } }, }, [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = { .name = "Hauppauge WinTV HVR 900 (R2)", .tda9887_conf = TDA9887_PRESENT, .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .mts_firmware = 1, .has_dvb = 1, .dvb_gpio = hauppauge_wintv_hvr_900R2_digital, .ir_codes = RC_MAP_HAUPPAUGE, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = hauppauge_wintv_hvr_900_analog, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = hauppauge_wintv_hvr_900_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = hauppauge_wintv_hvr_900_analog, } }, }, [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = { .name = "Hauppauge WinTV HVR 850", .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .mts_firmware = 1, .has_dvb = 1, .dvb_gpio = hauppauge_wintv_hvr_900_digital, .ir_codes = RC_MAP_HAUPPAUGE, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = hauppauge_wintv_hvr_900_analog, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = hauppauge_wintv_hvr_900_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = hauppauge_wintv_hvr_900_analog, } }, }, [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = { .name = "Hauppauge WinTV HVR 950", .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .mts_firmware = 1, .has_dvb = 1, .dvb_gpio = hauppauge_wintv_hvr_900_digital, .ir_codes = RC_MAP_HAUPPAUGE, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = hauppauge_wintv_hvr_900_analog, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = hauppauge_wintv_hvr_900_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = hauppauge_wintv_hvr_900_analog, } }, }, [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = { .name = "Pinnacle PCTV HD Pro Stick", .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .mts_firmware = 1, .has_dvb = 1, .dvb_gpio = hauppauge_wintv_hvr_900_digital, .ir_codes = RC_MAP_PINNACLE_PCTV_HD, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = hauppauge_wintv_hvr_900_analog, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = hauppauge_wintv_hvr_900_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = hauppauge_wintv_hvr_900_analog, } }, }, [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = { .name = "AMD ATI TV Wonder HD 600", .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .mts_firmware = 1, .has_dvb = 1, .dvb_gpio = hauppauge_wintv_hvr_900_digital, .ir_codes = RC_MAP_ATI_TV_WONDER_HD_600, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = hauppauge_wintv_hvr_900_analog, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = hauppauge_wintv_hvr_900_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = hauppauge_wintv_hvr_900_analog, } }, }, [EM2880_BOARD_TERRATEC_HYBRID_XS] = { .name = "Terratec Hybrid XS", .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, .has_dvb = 1, .dvb_gpio = default_digital, .ir_codes = RC_MAP_TERRATEC_CINERGY_XS, .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = default_analog, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = default_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = default_analog, } }, }, /* * maybe there's a reason behind it why Terratec sells the Hybrid XS * as Prodigy XS with a different PID, let's keep it separated for now * maybe we'll need it later on */ [EM2880_BOARD_TERRATEC_PRODIGY_XS] = { .name = "Terratec Prodigy XS", .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = hauppauge_wintv_hvr_900_analog, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = hauppauge_wintv_hvr_900_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = hauppauge_wintv_hvr_900_analog, } }, }, [EM2820_BOARD_MSI_VOX_USB_2] = { .name = "MSI VOX USB 2.0", .tuner_type = TUNER_LG_PAL_NEW_TAPC, .tda9887_conf = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE | TDA9887_PORT2_ACTIVE, .max_range_640_480 = 1, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = SAA7115_COMPOSITE4, .amux = EM28XX_AMUX_VIDEO, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2800_BOARD_TERRATEC_CINERGY_200] = { .name = "Terratec Cinergy 200 USB", .is_em2800 = 1, .has_ir_i2c = 1, .tuner_type = TUNER_LG_TALN, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = SAA7115_COMPOSITE2, .amux = EM28XX_AMUX_VIDEO, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2800_BOARD_GRABBEEX_USB2800] = { .name = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder", .is_em2800 = 1, .decoder = EM28XX_SAA711X, .tuner_type = TUNER_ABSENT, /* capture only board */ .input = { { .type = EM28XX_VMUX_COMPOSITE, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2800_BOARD_VC211A] = { .name = "Actionmaster/LinXcel/Digitus VC211A", .is_em2800 = 1, .tuner_type = TUNER_ABSENT, /* Capture-only board */ .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_COMPOSITE, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, .gpio = vc211a_enable, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, .gpio = vc211a_enable, } }, }, [EM2800_BOARD_LEADTEK_WINFAST_USBII] = { .name = "Leadtek Winfast USB II", .is_em2800 = 1, .tuner_type = TUNER_LG_PAL_NEW_TAPC, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = SAA7115_COMPOSITE2, .amux = EM28XX_AMUX_VIDEO, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2800_BOARD_KWORLD_USB2800] = { .name = "Kworld USB2800", .is_em2800 = 1, .tuner_type = TUNER_PHILIPS_FCV1236D, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = SAA7115_COMPOSITE2, .amux = EM28XX_AMUX_VIDEO, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2820_BOARD_PINNACLE_DVC_90] = { .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker / Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U", .tuner_type = TUNER_ABSENT, /* capture only board */ .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_COMPOSITE, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2800_BOARD_VGEAR_POCKETTV] = { .name = "V-Gear PocketTV", .is_em2800 = 1, .tuner_type = TUNER_LG_PAL_NEW_TAPC, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = SAA7115_COMPOSITE2, .amux = EM28XX_AMUX_VIDEO, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = { .name = "Pixelview PlayTV Box 4 USB 2.0", .tda9887_conf = TDA9887_PRESENT, .tuner_type = TUNER_YMEC_TVF_5533MF, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = SAA7115_COMPOSITE2, .amux = EM28XX_AMUX_VIDEO, .aout = EM28XX_AOUT_MONO | /* I2S */ EM28XX_AOUT_MASTER, /* Line out pin */ }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2820_BOARD_PROLINK_PLAYTV_USB2] = { .name = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0", .buttons = std_snapshot_button, .tda9887_conf = TDA9887_PRESENT, .tuner_type = TUNER_YMEC_TVF_5533MF, .tuner_addr = 0x60, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = SAA7115_COMPOSITE2, .amux = EM28XX_AMUX_VIDEO, .aout = EM28XX_AOUT_MONO | /* I2S */ EM28XX_AOUT_MASTER, /* Line out pin */ }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = { .name = "EM2860/SAA711X Reference Design", .buttons = std_snapshot_button, .tuner_type = TUNER_ABSENT, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = SAA7115_COMPOSITE0, } }, }, [EM2874_BOARD_LEADERSHIP_ISDBT] = { .def_i2c_bus = 1, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ, .xclk = EM28XX_XCLK_FREQUENCY_10MHZ, .name = "EM2874 Leadership ISDBT", .tuner_type = TUNER_ABSENT, .tuner_gpio = leadership_reset, .dvb_gpio = leadership_digital, .has_dvb = 1, }, [EM2880_BOARD_MSI_DIGIVOX_AD] = { .name = "MSI DigiVox A/D", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = em2880_msi_digivox_ad_analog, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = em2880_msi_digivox_ad_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = em2880_msi_digivox_ad_analog, } }, }, [EM2880_BOARD_MSI_DIGIVOX_AD_II] = { .name = "MSI DigiVox A/D II", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = em2880_msi_digivox_ad_analog, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = em2880_msi_digivox_ad_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = em2880_msi_digivox_ad_analog, } }, }, [EM2880_BOARD_KWORLD_DVB_305U] = { .name = "KWorld DVB-T 305U", .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2880_BOARD_KWORLD_DVB_310U] = { .name = "KWorld DVB-T 310U", .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .has_dvb = 1, .dvb_gpio = default_digital, .mts_firmware = 1, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = default_analog, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = default_analog, }, { /* S-video has not been tested yet */ .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = default_analog, } }, }, [EM2882_BOARD_KWORLD_ATSC_315U] = { .name = "KWorld ATSC 315U HDTV TV Box", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_THOMSON_DTT761X, .tuner_gpio = em2882_kworld_315u_tuner_gpio, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_SAA711X, .has_dvb = 1, .dvb_gpio = em2882_kworld_315u_digital, .ir_codes = RC_MAP_KWORLD_315U, .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, #if 0 /* FIXME: Analog mode - still not ready */ .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = SAA7115_COMPOSITE2, .amux = EM28XX_AMUX_VIDEO, .gpio = em2882_kworld_315u_analog, .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, .gpio = em2882_kworld_315u_analog1, .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, .gpio = em2882_kworld_315u_analog1, .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, } }, #endif }, [EM2880_BOARD_EMPIRE_DUAL_TV] = { .name = "Empire dual TV", .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .has_dvb = 1, .dvb_gpio = default_digital, .mts_firmware = 1, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = default_analog, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = default_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = default_analog, } }, }, [EM2881_BOARD_DNT_DA2_HYBRID] = { .name = "DNT DA2 Hybrid", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = default_analog, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = default_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = default_analog, } }, }, [EM2881_BOARD_PINNACLE_HYBRID_PRO] = { .name = "Pinnacle Hybrid Pro", .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, .has_dvb = 1, .dvb_gpio = pinnacle_hybrid_pro_digital, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = pinnacle_hybrid_pro_analog, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = pinnacle_hybrid_pro_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = pinnacle_hybrid_pro_analog, } }, }, [EM2882_BOARD_PINNACLE_HYBRID_PRO_330E] = { .name = "Pinnacle Hybrid Pro (330e)", .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .mts_firmware = 1, .has_dvb = 1, .dvb_gpio = hauppauge_wintv_hvr_900R2_digital, .ir_codes = RC_MAP_PINNACLE_PCTV_HD, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = hauppauge_wintv_hvr_900_analog, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = hauppauge_wintv_hvr_900_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = hauppauge_wintv_hvr_900_analog, } }, }, [EM2882_BOARD_KWORLD_VS_DVBT] = { .name = "Kworld VS-DVB-T 323UR", .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, .mts_firmware = 1, .has_dvb = 1, .dvb_gpio = kworld_330u_digital, .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ .ir_codes = RC_MAP_KWORLD_315U, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2882_BOARD_TERRATEC_HYBRID_XS] = { .name = "Terratec Cinergy Hybrid T USB XS (em2882)", .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .mts_firmware = 1, .decoder = EM28XX_TVP5150, .has_dvb = 1, .dvb_gpio = hauppauge_wintv_hvr_900_digital, .ir_codes = RC_MAP_TERRATEC_CINERGY_XS, .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = hauppauge_wintv_hvr_900_analog, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = hauppauge_wintv_hvr_900_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = hauppauge_wintv_hvr_900_analog, } }, }, [EM2882_BOARD_DIKOM_DK300] = { .name = "Dikom DK300", .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, .mts_firmware = 1, .has_dvb = 1, .dvb_gpio = dikom_dk300_digital, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = default_analog, } }, }, [EM2883_BOARD_KWORLD_HYBRID_330U] = { .name = "Kworld PlusTV HD Hybrid 330", .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, .mts_firmware = 1, .has_dvb = 1, .dvb_gpio = kworld_330u_digital, .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_EEPROM_ON_BOARD | EM28XX_I2C_EEPROM_KEY_VALID, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = kworld_330u_analog, .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = kworld_330u_analog, .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = kworld_330u_analog, } }, }, [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = { .name = "Compro VideoMate ForYou/Stereo", .tuner_type = TUNER_LG_PAL_NEW_TAPC, .tvaudio_addr = 0xb0, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_TVP5150, .adecoder = EM28XX_TVAUDIO, .mute_gpio = compro_mute_gpio, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = compro_unmute_tv_gpio, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = compro_unmute_svid_gpio, } }, }, [EM2860_BOARD_KAIOMY_TVNPC_U2] = { .name = "Kaiomy TVnPC U2", .vchannels = 3, .tuner_type = TUNER_XC2028, .tuner_addr = 0x61, .mts_firmware = 1, .decoder = EM28XX_TVP5150, .tuner_gpio = default_tuner_gpio, .ir_codes = RC_MAP_KAIOMY, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, } }, .radio = { .type = EM28XX_RADIO, .amux = EM28XX_AMUX_LINE_IN, } }, [EM2860_BOARD_EASYCAP] = { .name = "Easy Cap Capture DC-60", .vchannels = 2, .tuner_type = TUNER_ABSENT, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_COMPOSITE, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2820_BOARD_IODATA_GVMVP_SZ] = { .name = "IO-DATA GV-MVP/SZ", .tuner_type = TUNER_PHILIPS_FM1236_MK3, .tuner_gpio = default_tuner_gpio, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, }, { /* Composite has not been tested yet */ .type = EM28XX_VMUX_COMPOSITE, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_VIDEO, }, { /* S-video has not been tested yet */ .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_VIDEO, } }, }, [EM2860_BOARD_TERRATEC_GRABBY] = { .name = "Terratec Grabby", .vchannels = 2, .tuner_type = TUNER_ABSENT, .decoder = EM28XX_SAA711X, .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, .input = { { .type = EM28XX_VMUX_COMPOSITE, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, .buttons = std_snapshot_button, .leds = terratec_grabby_leds, }, [EM2860_BOARD_TERRATEC_AV350] = { .name = "Terratec AV350", .vchannels = 2, .tuner_type = TUNER_ABSENT, .decoder = EM28XX_TVP5150, .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, .mute_gpio = terratec_av350_mute_gpio, .input = { { .type = EM28XX_VMUX_COMPOSITE, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = terratec_av350_unmute_gpio, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = terratec_av350_unmute_gpio, } }, }, [EM2860_BOARD_ELGATO_VIDEO_CAPTURE] = { .name = "Elgato Video Capture", .decoder = EM28XX_SAA711X, .tuner_type = TUNER_ABSENT, /* Capture only device */ .input = { { .type = EM28XX_VMUX_COMPOSITE, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2882_BOARD_EVGA_INDTUBE] = { .name = "Evga inDtube", .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ .mts_firmware = 1, .has_dvb = 1, .dvb_gpio = evga_indtube_digital, .ir_codes = RC_MAP_EVGA_INDTUBE, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, .gpio = evga_indtube_analog, }, { .type = EM28XX_VMUX_COMPOSITE, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, .gpio = evga_indtube_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, .gpio = evga_indtube_analog, } }, }, /* * eb1a:2868 Empia EM2870 + Philips CU1216L NIM * (Philips TDA10023 + Infineon TUA6034) */ [EM2870_BOARD_REDDO_DVB_C_USB_BOX] = { .name = "Reddo DVB-C USB TV Box", .tuner_type = TUNER_ABSENT, .tuner_gpio = reddo_dvb_c_usb_box, .has_dvb = 1, }, /* * 1b80:a340 - Empia EM2870, NXP TDA18271HD and LG DT3304, sold * initially as the KWorld PlusTV 340U, then as the UB435-Q. * Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2 */ [EM2870_BOARD_KWORLD_A340] = { .name = "KWorld PlusTV 340U or UB435-Q (ATSC)", .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */ .has_dvb = 1, .dvb_gpio = kworld_a340_digital, .tuner_gpio = default_tuner_gpio, }, /* * 2013:024f PCTV nanoStick T2 290e. * Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2 */ [EM28174_BOARD_PCTV_290E] = { .name = "PCTV nanoStick T2 290e", .def_i2c_bus = 1, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ, .tuner_type = TUNER_ABSENT, .tuner_gpio = pctv_290e, .has_dvb = 1, .ir_codes = RC_MAP_PINNACLE_PCTV_HD, }, /* * 2013:024f PCTV DVB-S2 Stick 460e * Empia EM28174, NXP TDA10071, Conexant CX24118A and Allegro A8293 */ [EM28174_BOARD_PCTV_460E] = { .def_i2c_bus = 1, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, .name = "PCTV DVB-S2 Stick (460e)", .tuner_type = TUNER_ABSENT, .tuner_gpio = pctv_460e, .has_dvb = 1, .ir_codes = RC_MAP_PINNACLE_PCTV_HD, }, /* * eb1a:5006 Honestech VIDBOX NW03 * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner */ [EM2860_BOARD_HT_VIDBOX_NW03] = { .name = "Honestech Vidbox NW03", .tuner_type = TUNER_ABSENT, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_COMPOSITE, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, /* S-VIDEO needs check */ .amux = EM28XX_AMUX_LINE_IN, } }, }, /* * 1b80:e425 MaxMedia UB425-TC * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 */ [EM2874_BOARD_MAXMEDIA_UB425_TC] = { .name = "MaxMedia UB425-TC", .tuner_type = TUNER_ABSENT, .tuner_gpio = maxmedia_ub425_tc, .has_dvb = 1, .ir_codes = RC_MAP_REDDO, .def_i2c_bus = 1, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, }, /* * 2304:0242 PCTV QuatroStick (510e) * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */ [EM2884_BOARD_PCTV_510E] = { .name = "PCTV QuatroStick (510e)", .tuner_type = TUNER_ABSENT, .tuner_gpio = pctv_510e, .has_dvb = 1, .ir_codes = RC_MAP_PINNACLE_PCTV_HD, .def_i2c_bus = 1, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, }, /* * 2013:0251 PCTV QuatroStick nano (520e) * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */ [EM2884_BOARD_PCTV_520E] = { .name = "PCTV QuatroStick nano (520e)", .tuner_type = TUNER_ABSENT, .tuner_gpio = pctv_520e, .has_dvb = 1, .ir_codes = RC_MAP_PINNACLE_PCTV_HD, .def_i2c_bus = 1, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, }, [EM2884_BOARD_TERRATEC_HTC_USB_XS] = { .name = "Terratec Cinergy HTC USB XS", .has_dvb = 1, .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, .tuner_type = TUNER_ABSENT, .def_i2c_bus = 1, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, }, /* * 1b80:e1cc Delock 61959 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 * mostly the same as MaxMedia UB-425-TC but different remote */ [EM2874_BOARD_DELOCK_61959] = { .name = "Delock 61959", .tuner_type = TUNER_ABSENT, .tuner_gpio = maxmedia_ub425_tc, .has_dvb = 1, .ir_codes = RC_MAP_DELOCK_61959, .def_i2c_bus = 1, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, }, /* * 1b80:e346 KWorld USB ATSC TV Stick UB435-Q V2 * Empia EM2874B + LG DT3305 + NXP TDA18271HDC2 */ [EM2874_BOARD_KWORLD_UB435Q_V2] = { .name = "KWorld USB ATSC TV Stick UB435-Q V2", .tuner_type = TUNER_ABSENT, .has_dvb = 1, .dvb_gpio = kworld_a340_digital, .tuner_gpio = default_tuner_gpio, .def_i2c_bus = 1, }, /* * 1b80:e34c KWorld USB ATSC TV Stick UB435-Q V3 * Empia EM2874B + LG DT3305 + NXP TDA18271HDC2 */ [EM2874_BOARD_KWORLD_UB435Q_V3] = { .name = "KWorld USB ATSC TV Stick UB435-Q V3", .tuner_type = TUNER_ABSENT, .has_dvb = 1, .tuner_gpio = kworld_ub435q_v3_digital, .def_i2c_bus = 1, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ, .leds = kworld_ub435q_v3_leds, }, [EM2874_BOARD_PCTV_HD_MINI_80E] = { .name = "Pinnacle PCTV HD Mini", .tuner_type = TUNER_ABSENT, .has_dvb = 1, .dvb_gpio = em2874_pctv_80e_digital, .decoder = EM28XX_NODECODER, .ir_codes = RC_MAP_PINNACLE_PCTV_HD, .leds = pctv_80e_leds, }, /* * 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam * Empia EM2765 + OmniVision OV2640 */ [EM2765_BOARD_SPEEDLINK_VAD_LAPLACE] = { .name = "SpeedLink Vicious And Devine Laplace webcam", .xclk = EM28XX_XCLK_FREQUENCY_24MHZ, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ, .def_i2c_bus = 1, .tuner_type = TUNER_ABSENT, .is_webcam = 1, .input = { { .type = EM28XX_VMUX_COMPOSITE, .amux = EM28XX_AMUX_VIDEO, .gpio = speedlink_vad_laplace_reg_seq, } }, .buttons = speedlink_vad_laplace_buttons, .leds = speedlink_vad_laplace_leds, }, /* * 2013:0258 PCTV DVB-S2 Stick (461e) * Empia EM28178, Montage M88DS3103, Montage M88TS2022, Allegro A8293 */ [EM28178_BOARD_PCTV_461E] = { .def_i2c_bus = 1, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, .name = "PCTV DVB-S2 Stick (461e)", .tuner_type = TUNER_ABSENT, .tuner_gpio = pctv_461e, .has_dvb = 1, .ir_codes = RC_MAP_PINNACLE_PCTV_HD, }, /* * 2013:025f PCTV tripleStick (292e). * Empia EM28178, Silicon Labs Si2168, Silicon Labs Si2157 */ [EM28178_BOARD_PCTV_292E] = { .name = "PCTV tripleStick (292e)", .def_i2c_bus = 1, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, .tuner_type = TUNER_ABSENT, .tuner_gpio = pctv_292e, .has_dvb = 1, .ir_codes = RC_MAP_PINNACLE_PCTV_HD, }, [EM2861_BOARD_LEADTEK_VC100] = { .name = "Leadtek VC100", .tuner_type = TUNER_ABSENT, /* Capture only device */ .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_COMPOSITE, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, } }, }, /* * eb1a:8179 Terratec Cinergy T2 Stick HD. * Empia EM28178, Silicon Labs Si2168, Silicon Labs Si2146 */ [EM28178_BOARD_TERRATEC_T2_STICK_HD] = { .name = "Terratec Cinergy T2 Stick HD", .def_i2c_bus = 1, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, .tuner_type = TUNER_ABSENT, .tuner_gpio = terratec_t2_stick_hd, .has_dvb = 1, .ir_codes = RC_MAP_TERRATEC_SLIM_2, }, /* * 3275:0085 PLEX PX-BCUD. * Empia EM28178, TOSHIBA TC90532XBG, Sharp QM1D1C0042 */ [EM28178_BOARD_PLEX_PX_BCUD] = { .name = "PLEX PX-BCUD", .xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ, .def_i2c_bus = 1, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, .tuner_type = TUNER_ABSENT, .tuner_gpio = plex_px_bcud, .has_dvb = 1, }, /* * 2040:0265 Hauppauge WinTV-dualHD (DVB version) Isoc. * 2040:8265 Hauppauge WinTV-dualHD (DVB version) Bulk. * Empia EM28274, 2x Silicon Labs Si2168, 2x Silicon Labs Si2157 */ [EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB] = { .name = "Hauppauge WinTV-dualHD DVB", .def_i2c_bus = 1, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, .tuner_type = TUNER_ABSENT, .tuner_gpio = hauppauge_dualhd_dvb, .has_dvb = 1, .has_dual_ts = 1, .ir_codes = RC_MAP_HAUPPAUGE, .leds = hauppauge_dualhd_leds, }, /* * 2040:026d Hauppauge WinTV-dualHD (model 01595 - ATSC/QAM) Isoc. * 2040:826d Hauppauge WinTV-dualHD (model 01595 - ATSC/QAM) Bulk. * Empia EM28274, 2x LG LGDT3306A, 2x Silicon Labs Si2157 */ [EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595] = { .name = "Hauppauge WinTV-dualHD 01595 ATSC/QAM", .def_i2c_bus = 1, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, .tuner_type = TUNER_ABSENT, .tuner_gpio = hauppauge_dualhd_dvb, .has_dvb = 1, .has_dual_ts = 1, .ir_codes = RC_MAP_HAUPPAUGE, .leds = hauppauge_dualhd_leds, }, /* * 1b80:e349 Magix USB Videowandler-2 * (same chips as Honestech VIDBOX NW03) * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner */ [EM2861_BOARD_MAGIX_VIDEOWANDLER2] = { .name = "Magix USB Videowandler-2", .tuner_type = TUNER_ABSENT, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_COMPOSITE, .vmux = SAA7115_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, } }, }, }; EXPORT_SYMBOL_GPL(em28xx_boards); static const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); /* table of devices that work with this driver */ struct usb_device_id em28xx_id_table[] = { { USB_DEVICE(0xeb1a, 0x2750), .driver_info = EM2750_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2751), .driver_info = EM2750_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2800), .driver_info = EM2800_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2710), .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2820), .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2821), .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2860), .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2861), .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2862), .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2863), .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2870), .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2881), .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2883), /* used by :Zolid Hybrid Tv Stick */ .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2868), .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2875), .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2885), /* MSI Digivox Trio */ .driver_info = EM2884_BOARD_TERRATEC_H5 }, { USB_DEVICE(0xeb1a, 0xe300), .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U }, { USB_DEVICE(0xeb1a, 0xe303), .driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 }, { USB_DEVICE(0xeb1a, 0xe305), .driver_info = EM2880_BOARD_KWORLD_DVB_305U }, { USB_DEVICE(0xeb1a, 0xe310), .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD }, { USB_DEVICE(0xeb1a, 0xa313), .driver_info = EM2882_BOARD_KWORLD_ATSC_315U }, { USB_DEVICE(0xeb1a, 0xa316), .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U }, { USB_DEVICE(0xeb1a, 0xe320), .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II }, { USB_DEVICE(0xeb1a, 0xe323), .driver_info = EM2882_BOARD_KWORLD_VS_DVBT }, { USB_DEVICE(0xeb1a, 0xe350), .driver_info = EM2870_BOARD_KWORLD_350U }, { USB_DEVICE(0xeb1a, 0xe355), .driver_info = EM2870_BOARD_KWORLD_355U }, { USB_DEVICE(0xeb1a, 0x2801), .driver_info = EM2800_BOARD_GRABBEEX_USB2800 }, { USB_DEVICE(0xeb1a, 0xe357), .driver_info = EM2870_BOARD_KWORLD_355U }, { USB_DEVICE(0xeb1a, 0xe359), .driver_info = EM2870_BOARD_KWORLD_355U }, { USB_DEVICE(0x1b80, 0xe302), /* Kaiser Baas Video to DVD maker */ .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, { USB_DEVICE(0x1b80, 0xe304), /* Kworld DVD Maker 2 */ .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, { USB_DEVICE(0x0ccd, 0x0036), .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 }, { USB_DEVICE(0x0ccd, 0x004c), .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR }, { USB_DEVICE(0x0ccd, 0x004f), .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS }, { USB_DEVICE(0x0ccd, 0x005e), .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS }, { USB_DEVICE(0x0ccd, 0x0042), .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS }, { USB_DEVICE(0x0ccd, 0x0043), .driver_info = EM2870_BOARD_TERRATEC_XS_MT2060 }, { USB_DEVICE(0x0ccd, 0x008e), /* Cinergy HTC USB XS Rev. 1 */ .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS }, { USB_DEVICE(0x0ccd, 0x00ac), /* Cinergy HTC USB XS Rev. 2 */ .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS }, { USB_DEVICE(0x0ccd, 0x10a2), /* H5 Rev. 1 */ .driver_info = EM2884_BOARD_TERRATEC_H5 }, { USB_DEVICE(0x0ccd, 0x10ad), /* H5 Rev. 2 */ .driver_info = EM2884_BOARD_TERRATEC_H5 }, { USB_DEVICE(0x0ccd, 0x10b6), /* H5 Rev. 3 */ .driver_info = EM2884_BOARD_TERRATEC_H5 }, { USB_DEVICE(0x0ccd, 0x10b2), /* H6 */ .driver_info = EM2884_BOARD_TERRATEC_H6 }, { USB_DEVICE(0x0ccd, 0x0084), .driver_info = EM2860_BOARD_TERRATEC_AV350 }, { USB_DEVICE(0x0ccd, 0x0096), .driver_info = EM2860_BOARD_TERRATEC_GRABBY }, { USB_DEVICE(0x0ccd, 0x10AF), .driver_info = EM2860_BOARD_TERRATEC_GRABBY }, { USB_DEVICE(0x0ccd, 0x00b2), .driver_info = EM2884_BOARD_CINERGY_HTC_STICK }, { USB_DEVICE(0x0fd9, 0x0018), .driver_info = EM2884_BOARD_ELGATO_EYETV_HYBRID_2008 }, { USB_DEVICE(0x0fd9, 0x0033), .driver_info = EM2860_BOARD_ELGATO_VIDEO_CAPTURE }, { USB_DEVICE(0x185b, 0x2870), .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE }, { USB_DEVICE(0x185b, 0x2041), .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU }, { USB_DEVICE(0x2040, 0x4200), .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 }, { USB_DEVICE(0x2040, 0x4201), .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 }, { USB_DEVICE(0x2040, 0x6500), .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 }, { USB_DEVICE(0x2040, 0x6502), .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 }, { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */ .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, { USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */ .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, { USB_DEVICE(0x2040, 0x651b), /* RP HVR-950 */ .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, { USB_DEVICE(0x2040, 0x651f), .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 }, { USB_DEVICE(0x2040, 0x0265), .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB }, { USB_DEVICE(0x2040, 0x8265), .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB }, { USB_DEVICE(0x2040, 0x026d), .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595 }, { USB_DEVICE(0x2040, 0x826d), .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595 }, { USB_DEVICE(0x0438, 0xb002), .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 }, { USB_DEVICE(0x2001, 0xf112), .driver_info = EM2820_BOARD_DLINK_USB_TV }, { USB_DEVICE(0x2304, 0x0207), .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, { USB_DEVICE(0x2304, 0x0208), .driver_info = EM2820_BOARD_PINNACLE_USB_2 }, { USB_DEVICE(0x2304, 0x021a), .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, { USB_DEVICE(0x2304, 0x0226), .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO_330E }, { USB_DEVICE(0x2304, 0x0227), .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO }, { USB_DEVICE(0x2304, 0x023f), .driver_info = EM2874_BOARD_PCTV_HD_MINI_80E }, { USB_DEVICE(0x0413, 0x6023), .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII }, { USB_DEVICE(0x093b, 0xa003), .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, { USB_DEVICE(0x093b, 0xa005), .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U }, { USB_DEVICE(0x04bb, 0x0515), .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ }, { USB_DEVICE(0xeb1a, 0x50a6), .driver_info = EM2860_BOARD_GADMEI_UTV330 }, { USB_DEVICE(0x1b80, 0xa340), .driver_info = EM2870_BOARD_KWORLD_A340 }, { USB_DEVICE(0x1b80, 0xe346), .driver_info = EM2874_BOARD_KWORLD_UB435Q_V2 }, { USB_DEVICE(0x1b80, 0xe34c), .driver_info = EM2874_BOARD_KWORLD_UB435Q_V3 }, { USB_DEVICE(0x2013, 0x024f), .driver_info = EM28174_BOARD_PCTV_290E }, { USB_DEVICE(0x2013, 0x024c), .driver_info = EM28174_BOARD_PCTV_460E }, { USB_DEVICE(0x2040, 0x1605), .driver_info = EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C }, { USB_DEVICE(0x1b80, 0xe755), .driver_info = EM2884_BOARD_C3TECH_DIGITAL_DUO }, { USB_DEVICE(0xeb1a, 0x5006), .driver_info = EM2860_BOARD_HT_VIDBOX_NW03 }, { USB_DEVICE(0x1b80, 0xe309), /* Sveon STV40 */ .driver_info = EM2860_BOARD_EASYCAP }, { USB_DEVICE(0x1b80, 0xe425), .driver_info = EM2874_BOARD_MAXMEDIA_UB425_TC }, { USB_DEVICE(0x2304, 0x0242), .driver_info = EM2884_BOARD_PCTV_510E }, { USB_DEVICE(0x2013, 0x0251), .driver_info = EM2884_BOARD_PCTV_520E }, { USB_DEVICE(0x1b80, 0xe1cc), .driver_info = EM2874_BOARD_DELOCK_61959 }, { USB_DEVICE(0x1ae7, 0x9003), .driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE }, { USB_DEVICE(0x1ae7, 0x9004), .driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE }, { USB_DEVICE(0x2013, 0x0258), .driver_info = EM28178_BOARD_PCTV_461E }, { USB_DEVICE(0x2013, 0x025f), .driver_info = EM28178_BOARD_PCTV_292E }, { USB_DEVICE(0x2013, 0x0264), /* Hauppauge WinTV-soloHD 292e SE */ .driver_info = EM28178_BOARD_PCTV_292E }, { USB_DEVICE(0x2040, 0x0264), /* Hauppauge WinTV-soloHD Isoc */ .driver_info = EM28178_BOARD_PCTV_292E }, { USB_DEVICE(0x2040, 0x8264), /* Hauppauge OEM Generic WinTV-soloHD Bulk */ .driver_info = EM28178_BOARD_PCTV_292E }, { USB_DEVICE(0x2040, 0x8268), /* Hauppauge Retail WinTV-soloHD Bulk */ .driver_info = EM28178_BOARD_PCTV_292E }, { USB_DEVICE(0x0413, 0x6f07), .driver_info = EM2861_BOARD_LEADTEK_VC100 }, { USB_DEVICE(0xeb1a, 0x8179), .driver_info = EM28178_BOARD_TERRATEC_T2_STICK_HD }, { USB_DEVICE(0x3275, 0x0085), .driver_info = EM28178_BOARD_PLEX_PX_BCUD }, { USB_DEVICE(0xeb1a, 0x5051), /* Ion Video 2 PC MKII / Startech svid2usb23 / Raygo R12-41373 */ .driver_info = EM2860_BOARD_TVP5150_REFERENCE_DESIGN }, { USB_DEVICE(0x1b80, 0xe349), /* Magix USB Videowandler-2 */ .driver_info = EM2861_BOARD_MAGIX_VIDEOWANDLER2 }, { }, }; MODULE_DEVICE_TABLE(usb, em28xx_id_table); /* * EEPROM hash table for devices with generic USB IDs */ static const struct em28xx_hash_table em28xx_eeprom_hash[] = { /* P/N: SA 60002070465 Tuner: TVF7533-MF */ {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF}, {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF}, {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028}, {0x166a0441, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028}, {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028}, {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028}, {0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT}, {0x4e913442, EM2882_BOARD_DIKOM_DK300, TUNER_XC2028}, {0x85dd871e, EM2882_BOARD_ZOLID_HYBRID_TV_STICK, TUNER_XC2028}, }; /* I2C devicelist hash table for devices with generic USB IDs */ static const struct em28xx_hash_table em28xx_i2c_hash[] = { {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC}, {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC}, {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT}, {0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT}, {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC}, {0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF}, {0x6b800080, EM2874_BOARD_LEADERSHIP_ISDBT, TUNER_ABSENT}, {0x27e10080, EM2882_BOARD_ZOLID_HYBRID_TV_STICK, TUNER_XC2028}, }; /* NOTE: introduce a separate hash table for devices with 16 bit eeproms */ int em28xx_tuner_callback(void *ptr, int component, int command, int arg) { struct em28xx_i2c_bus *i2c_bus = ptr; struct em28xx *dev = i2c_bus->dev; int rc = 0; if (dev->tuner_type != TUNER_XC2028 && dev->tuner_type != TUNER_XC5000) return 0; if (command != XC2028_TUNER_RESET && command != XC5000_TUNER_RESET) return 0; rc = em28xx_gpio_set(dev, dev->board.tuner_gpio); return rc; } EXPORT_SYMBOL_GPL(em28xx_tuner_callback); static inline void em28xx_set_xclk_i2c_speed(struct em28xx *dev) { const struct em28xx_board *board = &em28xx_boards[dev->model]; u8 xclk = board->xclk, i2c_speed = board->i2c_speed; /* * Those are the default values for the majority of boards * Use those values if not specified otherwise at boards entry */ if (!xclk) xclk = EM28XX_XCLK_IR_RC5_MODE | EM28XX_XCLK_FREQUENCY_12MHZ; em28xx_write_reg(dev, EM28XX_R0F_XCLK, xclk); if (!i2c_speed) i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ; dev->i2c_speed = i2c_speed & 0x03; if (!dev->board.is_em2800) em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, i2c_speed); msleep(50); } static inline void em28xx_set_model(struct em28xx *dev) { dev->board = em28xx_boards[dev->model]; dev->has_msp34xx = dev->board.has_msp34xx; dev->is_webcam = dev->board.is_webcam; em28xx_set_xclk_i2c_speed(dev); /* Should be initialized early, for I2C to work */ dev->def_i2c_bus = dev->board.def_i2c_bus; } /* * Wait until AC97_RESET reports the expected value reliably before proceeding. * We also check that two unrelated registers accesses don't return the same * value to avoid premature return. * This procedure helps ensuring AC97 register accesses are reliable. */ static int em28xx_wait_until_ac97_features_equals(struct em28xx *dev, int expected_feat) { unsigned long timeout = jiffies + msecs_to_jiffies(2000); int feat, powerdown; while (time_is_after_jiffies(timeout)) { feat = em28xx_read_ac97(dev, AC97_RESET); if (feat < 0) return feat; powerdown = em28xx_read_ac97(dev, AC97_POWERDOWN); if (powerdown < 0) return powerdown; if (feat == expected_feat && feat != powerdown) return 0; msleep(50); } dev_warn(&dev->intf->dev, "AC97 registers access is not reliable !\n"); return -ETIMEDOUT; } /* * Since em28xx_pre_card_setup() requires a proper dev->model, * this won't work for boards with generic PCI IDs */ static void em28xx_pre_card_setup(struct em28xx *dev) { /* * Set the initial XCLK and I2C clock values based on the board * definition */ em28xx_set_xclk_i2c_speed(dev); /* request some modules */ switch (dev->model) { case EM2861_BOARD_PLEXTOR_PX_TV100U: /* Sets the msp34xx I2S speed */ dev->i2s_speed = 2048000; break; case EM2861_BOARD_KWORLD_PVRTV_300U: case EM2880_BOARD_KWORLD_DVB_305U: em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x6d); usleep_range(10000, 11000); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x7d); usleep_range(10000, 11000); break; case EM2870_BOARD_COMPRO_VIDEOMATE: /* * TODO: someone can do some cleanup here... * not everything's needed */ em28xx_write_reg(dev, EM2880_R04_GPO, 0x00); usleep_range(10000, 11000); em28xx_write_reg(dev, EM2880_R04_GPO, 0x01); usleep_range(10000, 11000); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); msleep(70); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc); msleep(70); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xdc); msleep(70); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc); msleep(70); break; case EM2870_BOARD_TERRATEC_XS_MT2060: /* * this device needs some gpio writes to get the DVB-T * demod work */ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); msleep(70); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde); msleep(70); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); msleep(70); break; case EM2870_BOARD_PINNACLE_PCTV_DVB: /* * this device needs some gpio writes to get the * DVB-T demod work */ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); msleep(70); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde); msleep(70); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); msleep(70); break; case EM2820_BOARD_GADMEI_UTV310: case EM2820_BOARD_MSI_VOX_USB_2: /* enables audio for that devices */ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); break; case EM2882_BOARD_KWORLD_ATSC_315U: em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff); usleep_range(10000, 11000); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); usleep_range(10000, 11000); em28xx_write_reg(dev, EM2880_R04_GPO, 0x00); usleep_range(10000, 11000); em28xx_write_reg(dev, EM2880_R04_GPO, 0x08); usleep_range(10000, 11000); break; case EM2860_BOARD_KAIOMY_TVNPC_U2: em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1); em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1); em28xx_write_regs(dev, 0x0d, "\x42", 1); em28xx_write_regs(dev, 0x08, "\xfd", 1); usleep_range(10000, 11000); em28xx_write_regs(dev, 0x08, "\xff", 1); usleep_range(10000, 11000); em28xx_write_regs(dev, 0x08, "\x7f", 1); usleep_range(10000, 11000); em28xx_write_regs(dev, 0x08, "\x6b", 1); break; case EM2860_BOARD_EASYCAP: em28xx_write_regs(dev, 0x08, "\xf8", 1); break; case EM2820_BOARD_IODATA_GVMVP_SZ: em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff); msleep(70); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf7); usleep_range(10000, 11000); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); msleep(70); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); msleep(70); break; case EM2860_BOARD_TERRATEC_GRABBY: /* * HACK?: Ensure AC97 register reading is reliable before * proceeding. In practice, this will wait about 1.6 seconds. */ em28xx_wait_until_ac97_features_equals(dev, 0x6a90); break; } em28xx_gpio_set(dev, dev->board.tuner_gpio); em28xx_set_mode(dev, EM28XX_ANALOG_MODE); /* Unlock device */ em28xx_set_mode(dev, EM28XX_SUSPEND); } static int em28xx_hint_board(struct em28xx *dev) { int i; if (dev->is_webcam) { if (dev->em28xx_sensor == EM28XX_MT9V011) { dev->model = EM2820_BOARD_SILVERCREST_WEBCAM; } else if (dev->em28xx_sensor == EM28XX_MT9M001 || dev->em28xx_sensor == EM28XX_MT9M111) { dev->model = EM2750_BOARD_UNKNOWN; } /* FIXME: IMPROVE ! */ return 0; } /* * HINT method: EEPROM * * This method works only for boards with eeprom. * Uses a hash of all eeprom bytes. The hash should be * unique for a vendor/tuner pair. * There are a high chance that tuners for different * video standards produce different hashes. */ for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) { if (dev->hash == em28xx_eeprom_hash[i].hash) { dev->model = em28xx_eeprom_hash[i].model; dev->tuner_type = em28xx_eeprom_hash[i].tuner; dev_err(&dev->intf->dev, "Your board has no unique USB ID.\n" "A hint were successfully done, based on eeprom hash.\n" "This method is not 100%% failproof.\n" "If the board were misdetected, please email this log to:\n" "\tV4L Mailing List \n" "Board detected as %s\n", em28xx_boards[dev->model].name); return 0; } } /* * HINT method: I2C attached devices * * This method works for all boards. * Uses a hash of i2c scanned devices. * Devices with the same i2c attached chips will * be considered equal. * This method is less precise than the eeprom one. */ /* user did not request i2c scanning => do it now */ if (!dev->i2c_hash) em28xx_do_i2c_scan(dev, dev->def_i2c_bus); for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) { if (dev->i2c_hash == em28xx_i2c_hash[i].hash) { dev->model = em28xx_i2c_hash[i].model; dev->tuner_type = em28xx_i2c_hash[i].tuner; dev_err(&dev->intf->dev, "Your board has no unique USB ID.\n" "A hint were successfully done, based on i2c devicelist hash.\n" "This method is not 100%% failproof.\n" "If the board were misdetected, please email this log to:\n" "\tV4L Mailing List \n" "Board detected as %s\n", em28xx_boards[dev->model].name); return 0; } } dev_err(&dev->intf->dev, "Your board has no unique USB ID and thus need a hint to be detected.\n" "You may try to use card= insmod option to workaround that.\n" "Please send an email with this log to:\n" "\tV4L Mailing List \n" "Board eeprom hash is 0x%08lx\n" "Board i2c devicelist hash is 0x%08lx\n", dev->hash, dev->i2c_hash); dev_err(&dev->intf->dev, "Here is a list of valid choices for the card= insmod option:\n"); for (i = 0; i < em28xx_bcount; i++) { dev_err(&dev->intf->dev, " card=%d -> %s\n", i, em28xx_boards[i].name); } return -1; } static void em28xx_card_setup(struct em28xx *dev) { int i, j, idx; bool duplicate_entry; /* * If the device can be a webcam, seek for a sensor. * If sensor is not found, then it isn't a webcam. */ if (dev->is_webcam) { em28xx_detect_sensor(dev); if (dev->em28xx_sensor == EM28XX_NOSENSOR) /* NOTE: error/unknown sensor/no sensor */ dev->is_webcam = 0; } switch (dev->model) { case EM2750_BOARD_UNKNOWN: case EM2820_BOARD_UNKNOWN: case EM2800_BOARD_UNKNOWN: /* * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD. * * This occurs because they share identical USB vendor and * product IDs. * * What we do here is look up the EEPROM hash of the K-WORLD * and if it is found then we decide that we do not have * a DIGIVOX and reset the device to the K-WORLD instead. * * This solution is only valid if they do not share eeprom * hash identities which has not been determined as yet. */ if (em28xx_hint_board(dev) < 0) { dev_err(&dev->intf->dev, "Board not discovered\n"); } else { em28xx_set_model(dev); em28xx_pre_card_setup(dev); } break; default: em28xx_set_model(dev); } dev_info(&dev->intf->dev, "Identified as %s (card=%d)\n", dev->board.name, dev->model); dev->tuner_type = em28xx_boards[dev->model].tuner_type; /* request some modules */ switch (dev->model) { case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2: case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C: case EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB: case EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595: { struct tveeprom tv; if (!dev->eedata) break; #if defined(CONFIG_MODULES) && defined(MODULE) request_module("tveeprom"); #endif /* Call first TVeeprom */ tveeprom_hauppauge_analog(&tv, dev->eedata); dev->tuner_type = tv.tuner_type; if (tv.audio_processor == TVEEPROM_AUDPROC_MSP) { dev->i2s_speed = 2048000; dev->has_msp34xx = 1; } break; } case EM2882_BOARD_KWORLD_ATSC_315U: em28xx_write_reg(dev, 0x0d, 0x42); usleep_range(10000, 11000); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); usleep_range(10000, 11000); break; case EM2820_BOARD_KWORLD_PVRTV2800RF: /* GPIO enables sound on KWORLD PVR TV 2800RF */ em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf9); break; case EM2820_BOARD_UNKNOWN: case EM2800_BOARD_UNKNOWN: /* * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD. * * This occurs because they share identical USB vendor and * product IDs. * * What we do here is look up the EEPROM hash of the K-WORLD * and if it is found then we decide that we do not have * a DIGIVOX and reset the device to the K-WORLD instead. * * This solution is only valid if they do not share eeprom * hash identities which has not been determined as yet. */ case EM2880_BOARD_MSI_DIGIVOX_AD: if (!em28xx_hint_board(dev)) em28xx_set_model(dev); /* * In cases where we had to use a board hint, the call to * em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, * so make the call now so the analog GPIOs are set properly * before probing the i2c bus. */ em28xx_gpio_set(dev, dev->board.tuner_gpio); em28xx_set_mode(dev, EM28XX_ANALOG_MODE); break; /* * The Dikom DK300 is detected as an Kworld VS-DVB-T 323UR. * * This occurs because they share identical USB vendor and * product IDs. * * What we do here is look up the EEPROM hash of the Dikom * and if it is found then we decide that we do not have * a Kworld and reset the device to the Dikom instead. * * This solution is only valid if they do not share eeprom * hash identities which has not been determined as yet. */ case EM2882_BOARD_KWORLD_VS_DVBT: if (!em28xx_hint_board(dev)) em28xx_set_model(dev); /* * In cases where we had to use a board hint, the call to * em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, * so make the call now so the analog GPIOs are set properly * before probing the i2c bus. */ em28xx_gpio_set(dev, dev->board.tuner_gpio); em28xx_set_mode(dev, EM28XX_ANALOG_MODE); break; } if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) { dev_err(&dev->intf->dev, "\n\n" "The support for this board weren't valid yet.\n" "Please send a report of having this working\n" "not to V4L mailing list (and/or to other addresses)\n\n"); } /* Free eeprom data memory */ kfree(dev->eedata); dev->eedata = NULL; /* Allow override tuner type by a module parameter */ if (tuner >= 0) dev->tuner_type = tuner; /* * Dynamically generate a list of valid audio inputs for this * specific board, mapping them via enum em28xx_amux. */ idx = 0; for (i = 0; i < MAX_EM28XX_INPUT; i++) { if (!INPUT(i)->type) continue; /* Skip already mapped audio inputs */ duplicate_entry = false; for (j = 0; j < idx; j++) { if (INPUT(i)->amux == dev->amux_map[j]) { duplicate_entry = true; break; } } if (duplicate_entry) continue; dev->amux_map[idx++] = INPUT(i)->amux; } for (; idx < MAX_EM28XX_INPUT; idx++) dev->amux_map[idx] = EM28XX_AMUX_UNUSED; } void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) { memset(ctl, 0, sizeof(*ctl)); ctl->fname = XC2028_DEFAULT_FIRMWARE; ctl->max_len = 64; ctl->mts = em28xx_boards[dev->model].mts_firmware; switch (dev->model) { case EM2880_BOARD_EMPIRE_DUAL_TV: case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: case EM2882_BOARD_TERRATEC_HYBRID_XS: case EM2880_BOARD_TERRATEC_HYBRID_XS: case EM2880_BOARD_TERRATEC_HYBRID_XS_FR: case EM2881_BOARD_PINNACLE_HYBRID_PRO: case EM2882_BOARD_ZOLID_HYBRID_TV_STICK: ctl->demod = XC3028_FE_ZARLINK456; break; case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E: ctl->demod = XC3028_FE_DEFAULT; break; case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600: ctl->demod = XC3028_FE_DEFAULT; ctl->fname = XC3028L_DEFAULT_FIRMWARE; break; case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: case EM2880_BOARD_PINNACLE_PCTV_HD_PRO: /* FIXME: Better to specify the needed IF */ ctl->demod = XC3028_FE_DEFAULT; break; case EM2883_BOARD_KWORLD_HYBRID_330U: case EM2882_BOARD_DIKOM_DK300: case EM2882_BOARD_KWORLD_VS_DVBT: ctl->demod = XC3028_FE_CHINA; ctl->fname = XC2028_DEFAULT_FIRMWARE; break; case EM2882_BOARD_EVGA_INDTUBE: ctl->demod = XC3028_FE_CHINA; ctl->fname = XC3028L_DEFAULT_FIRMWARE; break; default: ctl->demod = XC3028_FE_OREN538; } } EXPORT_SYMBOL_GPL(em28xx_setup_xc3028); static void request_module_async(struct work_struct *work) { struct em28xx *dev = container_of(work, struct em28xx, request_module_wk); /* * The em28xx extensions can be modules or builtin. If the * modules are already loaded or are built in, those extensions * can be initialised right now. Otherwise, the module init * code will do it. */ /* * Devices with an audio-only intf also have a V4L/DVB/RC * intf. Don't register extensions twice on those devices. */ if (dev->is_audio_only) { #if defined(CONFIG_MODULES) && defined(MODULE) request_module("em28xx-alsa"); #endif return; } em28xx_init_extension(dev); #if defined(CONFIG_MODULES) && defined(MODULE) if (dev->has_video) request_module("em28xx-v4l"); if (dev->usb_audio_type == EM28XX_USB_AUDIO_CLASS) request_module("snd-usb-audio"); else if (dev->usb_audio_type == EM28XX_USB_AUDIO_VENDOR) request_module("em28xx-alsa"); if (dev->board.has_dvb) request_module("em28xx-dvb"); if (dev->board.buttons || ((dev->board.ir_codes || dev->board.has_ir_i2c) && !disable_ir)) request_module("em28xx-rc"); #endif /* CONFIG_MODULES */ } static void request_modules(struct em28xx *dev) { INIT_WORK(&dev->request_module_wk, request_module_async); schedule_work(&dev->request_module_wk); } static void flush_request_modules(struct em28xx *dev) { flush_work(&dev->request_module_wk); } static int em28xx_media_device_init(struct em28xx *dev, struct usb_device *udev) { #ifdef CONFIG_MEDIA_CONTROLLER struct media_device *mdev; mdev = kzalloc(sizeof(*mdev), GFP_KERNEL); if (!mdev) return -ENOMEM; if (udev->product) media_device_usb_init(mdev, udev, udev->product); else if (udev->manufacturer) media_device_usb_init(mdev, udev, udev->manufacturer); else media_device_usb_init(mdev, udev, dev_name(&dev->intf->dev)); dev->media_dev = mdev; #endif return 0; } static void em28xx_unregister_media_device(struct em28xx *dev) { #ifdef CONFIG_MEDIA_CONTROLLER if (dev->media_dev) { media_device_unregister(dev->media_dev); media_device_cleanup(dev->media_dev); kfree(dev->media_dev); dev->media_dev = NULL; } #endif } /* * em28xx_release_resources() * unregisters the v4l2,i2c and usb devices * called when the device gets disconnected or at module unload */ static void em28xx_release_resources(struct em28xx *dev) { struct usb_device *udev = interface_to_usbdev(dev->intf); /*FIXME: I2C IR should be disconnected */ mutex_lock(&dev->lock); em28xx_unregister_media_device(dev); if (dev->def_i2c_bus) em28xx_i2c_unregister(dev, 1); em28xx_i2c_unregister(dev, 0); if (dev->ts == PRIMARY_TS) usb_put_dev(udev); /* Mark device as unused */ clear_bit(dev->devno, em28xx_devused); mutex_unlock(&dev->lock); }; /** * em28xx_free_device() - Free em28xx device * * @ref: struct kref for em28xx device * * This is called when all extensions and em28xx core unregisters a device */ void em28xx_free_device(struct kref *ref) { struct em28xx *dev = kref_to_dev(ref); dev_info(&dev->intf->dev, "Freeing device\n"); if (!dev->disconnected) em28xx_release_resources(dev); if (dev->ts == PRIMARY_TS) kfree(dev->alt_max_pkt_size_isoc); kfree(dev); } EXPORT_SYMBOL_GPL(em28xx_free_device); /* * em28xx_init_dev() * allocates and inits the device structs, registers i2c bus and v4l device */ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev, struct usb_interface *intf, int minor) { int retval; const char *chip_name = NULL; dev->intf = intf; mutex_init(&dev->ctrl_urb_lock); spin_lock_init(&dev->slock); dev->em28xx_write_regs = em28xx_write_regs; dev->em28xx_read_reg = em28xx_read_reg; dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len; dev->em28xx_write_regs_req = em28xx_write_regs_req; dev->em28xx_read_reg_req = em28xx_read_reg_req; dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800; em28xx_set_model(dev); dev->wait_after_write = 5; /* Based on the Chip ID, set the device configuration */ retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID); if (retval > 0) { dev->chip_id = retval; switch (dev->chip_id) { case CHIP_ID_EM2800: chip_name = "em2800"; break; case CHIP_ID_EM2710: chip_name = "em2710"; break; case CHIP_ID_EM2750: chip_name = "em2750"; break; case CHIP_ID_EM2765: chip_name = "em2765"; dev->wait_after_write = 0; dev->is_em25xx = 1; dev->eeprom_addrwidth_16bit = 1; break; case CHIP_ID_EM2820: chip_name = "em2710/2820"; if (le16_to_cpu(udev->descriptor.idVendor) == 0xeb1a) { __le16 idProd = udev->descriptor.idProduct; if (le16_to_cpu(idProd) == 0x2710) chip_name = "em2710"; else if (le16_to_cpu(idProd) == 0x2820) chip_name = "em2820"; } /* NOTE: the em2820 is used in webcams, too ! */ break; case CHIP_ID_EM2840: chip_name = "em2840"; break; case CHIP_ID_EM2860: chip_name = "em2860"; break; case CHIP_ID_EM2870: chip_name = "em2870"; dev->wait_after_write = 0; break; case CHIP_ID_EM2874: chip_name = "em2874"; dev->wait_after_write = 0; dev->eeprom_addrwidth_16bit = 1; break; case CHIP_ID_EM28174: chip_name = "em28174"; dev->wait_after_write = 0; dev->eeprom_addrwidth_16bit = 1; break; case CHIP_ID_EM28178: chip_name = "em28178"; dev->wait_after_write = 0; dev->eeprom_addrwidth_16bit = 1; break; case CHIP_ID_EM2883: chip_name = "em2882/3"; dev->wait_after_write = 0; break; case CHIP_ID_EM2884: chip_name = "em2884"; dev->wait_after_write = 0; dev->eeprom_addrwidth_16bit = 1; break; } } if (!chip_name) dev_info(&dev->intf->dev, "unknown em28xx chip ID (%d)\n", dev->chip_id); else dev_info(&dev->intf->dev, "chip ID is %s\n", chip_name); em28xx_media_device_init(dev, udev); if (dev->is_audio_only) { retval = em28xx_audio_setup(dev); if (retval) return -ENODEV; em28xx_init_extension(dev); return 0; } em28xx_pre_card_setup(dev); rt_mutex_init(&dev->i2c_bus_lock); /* register i2c bus 0 */ if (dev->board.is_em2800) retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM2800); else retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM28XX); if (retval < 0) { dev_err(&dev->intf->dev, "%s: em28xx_i2c_register bus 0 - error [%d]!\n", __func__, retval); return retval; } /* register i2c bus 1 */ if (dev->def_i2c_bus) { if (dev->is_em25xx) retval = em28xx_i2c_register(dev, 1, EM28XX_I2C_ALGO_EM25XX_BUS_B); else retval = em28xx_i2c_register(dev, 1, EM28XX_I2C_ALGO_EM28XX); if (retval < 0) { dev_err(&dev->intf->dev, "%s: em28xx_i2c_register bus 1 - error [%d]!\n", __func__, retval); em28xx_i2c_unregister(dev, 0); return retval; } } /* Do board specific init and eeprom reading */ em28xx_card_setup(dev); return 0; } static int em28xx_duplicate_dev(struct em28xx *dev) { int nr; struct em28xx *sec_dev = kmemdup(dev, sizeof(*sec_dev), GFP_KERNEL); if (!sec_dev) { dev->dev_next = NULL; return -ENOMEM; } /* Check to see next free device and mark as used */ do { nr = find_first_zero_bit(em28xx_devused, EM28XX_MAXBOARDS); if (nr >= EM28XX_MAXBOARDS) { /* No free device slots */ dev_warn(&dev->intf->dev, ": Supports only %i em28xx boards.\n", EM28XX_MAXBOARDS); kfree(sec_dev); dev->dev_next = NULL; return -ENOMEM; } } while (test_and_set_bit(nr, em28xx_devused)); sec_dev->devno = nr; snprintf(sec_dev->name, 28, "em28xx #%d", nr); sec_dev->dev_next = NULL; dev->dev_next = sec_dev; return 0; } /* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */ #define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03)) static void em28xx_check_usb_descriptor(struct em28xx *dev, struct usb_device *udev, struct usb_interface *intf, int alt, int ep, bool *has_vendor_audio, bool *has_video, bool *has_dvb) { const struct usb_endpoint_descriptor *e; int sizedescr, size; /* * NOTE: * * Old logic with support for isoc transfers only was: * 0x82 isoc => analog * 0x83 isoc => audio * 0x84 isoc => digital * * New logic with support for bulk transfers * 0x82 isoc => analog * 0x82 bulk => analog * 0x83 isoc* => audio * 0x84 isoc => digital * 0x84 bulk => analog or digital** * 0x85 isoc => digital TS2 * 0x85 bulk => digital TS2 * (*: audio should always be isoc) * (**: analog, if ep 0x82 is isoc, otherwise digital) * * The new logic preserves backwards compatibility and * reflects the endpoint configurations we have seen * so far. But there might be devices for which this * logic is not sufficient... */ e = &intf->altsetting[alt].endpoint[ep].desc; if (!usb_endpoint_dir_in(e)) return; sizedescr = le16_to_cpu(e->wMaxPacketSize); size = sizedescr & 0x7ff; if (udev->speed == USB_SPEED_HIGH) size = size * hb_mult(sizedescr); /* Only inspect input endpoints */ switch (e->bEndpointAddress) { case 0x82: *has_video = true; if (usb_endpoint_xfer_isoc(e)) { dev->analog_ep_isoc = e->bEndpointAddress; dev->alt_max_pkt_size_isoc[alt] = size; } else if (usb_endpoint_xfer_bulk(e)) { dev->analog_ep_bulk = e->bEndpointAddress; } return; case 0x83: if (usb_endpoint_xfer_isoc(e)) *has_vendor_audio = true; else dev_err(&intf->dev, "error: skipping audio endpoint 0x83, because it uses bulk transfers !\n"); return; case 0x84: if (*has_video && (usb_endpoint_xfer_bulk(e))) { dev->analog_ep_bulk = e->bEndpointAddress; } else { if (usb_endpoint_xfer_isoc(e)) { if (size > dev->dvb_max_pkt_size_isoc) { /* * 2) some manufacturers (e.g. Terratec) * disable endpoints by setting * wMaxPacketSize to 0 bytes for all * alt settings. So far, we've seen * this for DVB isoc endpoints only. */ *has_dvb = true; dev->dvb_ep_isoc = e->bEndpointAddress; dev->dvb_max_pkt_size_isoc = size; dev->dvb_alt_isoc = alt; } } else { *has_dvb = true; dev->dvb_ep_bulk = e->bEndpointAddress; } } return; case 0x85: if (usb_endpoint_xfer_isoc(e)) { if (size > dev->dvb_max_pkt_size_isoc_ts2) { dev->dvb_ep_isoc_ts2 = e->bEndpointAddress; dev->dvb_max_pkt_size_isoc_ts2 = size; dev->dvb_alt_isoc = alt; } } else { dev->dvb_ep_bulk_ts2 = e->bEndpointAddress; } return; } } /* * em28xx_usb_probe() * checks for supported devices */ static int em28xx_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct usb_device *udev; struct em28xx *dev = NULL; int retval; bool has_vendor_audio = false, has_video = false, has_dvb = false; int i, nr, try_bulk; const int ifnum = intf->altsetting[0].desc.bInterfaceNumber; char *speed; udev = usb_get_dev(interface_to_usbdev(intf)); /* Check to see next free device and mark as used */ do { nr = find_first_zero_bit(em28xx_devused, EM28XX_MAXBOARDS); if (nr >= EM28XX_MAXBOARDS) { /* No free device slots */ dev_err(&intf->dev, "Driver supports up to %i em28xx boards.\n", EM28XX_MAXBOARDS); retval = -ENOMEM; goto err_no_slot; } } while (test_and_set_bit(nr, em28xx_devused)); /* Don't register audio interfaces */ if (intf->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { dev_info(&intf->dev, "audio device (%04x:%04x): interface %i, class %i\n", le16_to_cpu(udev->descriptor.idVendor), le16_to_cpu(udev->descriptor.idProduct), ifnum, intf->altsetting[0].desc.bInterfaceClass); retval = -ENODEV; goto err; } /* allocate memory for our device state and initialize it */ dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (!dev) { retval = -ENOMEM; goto err; } /* compute alternate max packet sizes */ dev->alt_max_pkt_size_isoc = kcalloc(intf->num_altsetting, sizeof(dev->alt_max_pkt_size_isoc[0]), GFP_KERNEL); if (!dev->alt_max_pkt_size_isoc) { kfree(dev); retval = -ENOMEM; goto err; } /* Get endpoints */ for (i = 0; i < intf->num_altsetting; i++) { int ep; for (ep = 0; ep < intf->altsetting[i].desc.bNumEndpoints; ep++) em28xx_check_usb_descriptor(dev, udev, intf, i, ep, &has_vendor_audio, &has_video, &has_dvb); } if (!(has_vendor_audio || has_video || has_dvb)) { retval = -ENODEV; goto err_free; } switch (udev->speed) { case USB_SPEED_LOW: speed = "1.5"; break; case USB_SPEED_UNKNOWN: case USB_SPEED_FULL: speed = "12"; break; case USB_SPEED_HIGH: speed = "480"; break; default: speed = "unknown"; } dev_info(&intf->dev, "New device %s %s @ %s Mbps (%04x:%04x, interface %d, class %d)\n", udev->manufacturer ? udev->manufacturer : "", udev->product ? udev->product : "", speed, le16_to_cpu(udev->descriptor.idVendor), le16_to_cpu(udev->descriptor.idProduct), ifnum, intf->altsetting->desc.bInterfaceNumber); /* * Make sure we have 480 Mbps of bandwidth, otherwise things like * video stream wouldn't likely work, since 12 Mbps is generally * not enough even for most Digital TV streams. */ if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) { dev_err(&intf->dev, "Device initialization failed.\n"); dev_err(&intf->dev, "Device must be connected to a high-speed USB 2.0 port.\n"); retval = -ENODEV; goto err_free; } dev->devno = nr; dev->model = id->driver_info; dev->alt = -1; dev->is_audio_only = has_vendor_audio && !(has_video || has_dvb); dev->has_video = has_video; dev->ifnum = ifnum; dev->ts = PRIMARY_TS; snprintf(dev->name, 28, "em28xx"); dev->dev_next = NULL; if (has_vendor_audio) { dev_info(&intf->dev, "Audio interface %i found (Vendor Class)\n", ifnum); dev->usb_audio_type = EM28XX_USB_AUDIO_VENDOR; } /* Checks if audio is provided by a USB Audio Class intf */ for (i = 0; i < udev->config->desc.bNumInterfaces; i++) { struct usb_interface *uif = udev->config->interface[i]; if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { if (has_vendor_audio) dev_err(&intf->dev, "em28xx: device seems to have vendor AND usb audio class interfaces !\n" "\t\tThe vendor interface will be ignored. Please contact the developers \n"); dev->usb_audio_type = EM28XX_USB_AUDIO_CLASS; break; } } if (has_video) dev_info(&intf->dev, "Video interface %i found:%s%s\n", ifnum, dev->analog_ep_bulk ? " bulk" : "", dev->analog_ep_isoc ? " isoc" : ""); if (has_dvb) dev_info(&intf->dev, "DVB interface %i found:%s%s\n", ifnum, dev->dvb_ep_bulk ? " bulk" : "", dev->dvb_ep_isoc ? " isoc" : ""); dev->num_alt = intf->num_altsetting; if ((unsigned int)card[nr] < em28xx_bcount) dev->model = card[nr]; /* save our data pointer in this intf device */ usb_set_intfdata(intf, dev); /* allocate device struct and check if the device is a webcam */ mutex_init(&dev->lock); retval = em28xx_init_dev(dev, udev, intf, nr); if (retval) goto err_free; if (usb_xfer_mode < 0) { if (dev->is_webcam) try_bulk = 1; else try_bulk = 0; } else { try_bulk = usb_xfer_mode > 0; } /* Disable V4L2 if the device doesn't have a decoder or image sensor */ if (has_video && dev->board.decoder == EM28XX_NODECODER && dev->em28xx_sensor == EM28XX_NOSENSOR) { dev_err(&intf->dev, "Currently, V4L2 is not supported on this model\n"); has_video = false; dev->has_video = false; } if (dev->board.has_dual_ts && (dev->tuner_type != TUNER_ABSENT || INPUT(0)->type)) { /* * The logic with sets alternate is not ready for dual-tuners * which analog modes. */ dev_err(&intf->dev, "We currently don't support analog TV or stream capture on dual tuners.\n"); has_video = false; } /* Select USB transfer types to use */ if (has_video) { if (!dev->analog_ep_isoc || (try_bulk && dev->analog_ep_bulk)) dev->analog_xfer_bulk = 1; dev_info(&intf->dev, "analog set to %s mode.\n", dev->analog_xfer_bulk ? "bulk" : "isoc"); } if (has_dvb) { if (!dev->dvb_ep_isoc || (try_bulk && dev->dvb_ep_bulk)) dev->dvb_xfer_bulk = 1; dev_info(&intf->dev, "dvb set to %s mode.\n", dev->dvb_xfer_bulk ? "bulk" : "isoc"); } if (dev->board.has_dual_ts && em28xx_duplicate_dev(dev) == 0) { dev->dev_next->ts = SECONDARY_TS; dev->dev_next->alt = -1; dev->dev_next->is_audio_only = has_vendor_audio && !(has_video || has_dvb); dev->dev_next->has_video = false; dev->dev_next->ifnum = ifnum; dev->dev_next->model = id->driver_info; mutex_init(&dev->dev_next->lock); retval = em28xx_init_dev(dev->dev_next, udev, intf, dev->dev_next->devno); if (retval) goto err_free; dev->dev_next->board.ir_codes = NULL; /* No IR for 2nd tuner */ dev->dev_next->board.has_ir_i2c = 0; /* No IR for 2nd tuner */ if (usb_xfer_mode < 0) { if (dev->dev_next->is_webcam) try_bulk = 1; else try_bulk = 0; } else { try_bulk = usb_xfer_mode > 0; } /* Select USB transfer types to use */ if (has_dvb) { if (!dev->dvb_ep_isoc_ts2 || (try_bulk && dev->dvb_ep_bulk_ts2)) dev->dev_next->dvb_xfer_bulk = 1; dev_info(&dev->intf->dev, "dvb ts2 set to %s mode.\n", dev->dev_next->dvb_xfer_bulk ? "bulk" : "isoc"); } dev->dev_next->dvb_ep_isoc = dev->dvb_ep_isoc_ts2; dev->dev_next->dvb_ep_bulk = dev->dvb_ep_bulk_ts2; dev->dev_next->dvb_max_pkt_size_isoc = dev->dvb_max_pkt_size_isoc_ts2; dev->dev_next->dvb_alt_isoc = dev->dvb_alt_isoc; /* Configuare hardware to support TS2*/ if (dev->dvb_xfer_bulk) { /* The ep4 and ep5 are configuared for BULK */ em28xx_write_reg(dev, 0x0b, 0x96); mdelay(100); em28xx_write_reg(dev, 0x0b, 0x80); mdelay(100); } else { /* The ep4 and ep5 are configuared for ISO */ em28xx_write_reg(dev, 0x0b, 0x96); mdelay(100); em28xx_write_reg(dev, 0x0b, 0x82); mdelay(100); } kref_init(&dev->dev_next->ref); } kref_init(&dev->ref); request_modules(dev); /* * Do it at the end, to reduce dynamic configuration changes during * the device init. Yet, as request_modules() can be async, the * topology will likely change after the load of the em28xx subdrivers. */ #ifdef CONFIG_MEDIA_CONTROLLER retval = media_device_register(dev->media_dev); #endif return 0; err_free: kfree(dev->alt_max_pkt_size_isoc); kfree(dev); err: clear_bit(nr, em28xx_devused); err_no_slot: usb_put_dev(udev); return retval; } /* * em28xx_usb_disconnect() * called when the device gets disconnected * video device will be unregistered on v4l2_close in case it is still open */ static void em28xx_usb_disconnect(struct usb_interface *intf) { struct em28xx *dev; dev = usb_get_intfdata(intf); usb_set_intfdata(intf, NULL); if (!dev) return; if (dev->dev_next) { dev->dev_next->disconnected = 1; dev_info(&dev->intf->dev, "Disconnecting %s\n", dev->dev_next->name); } dev->disconnected = 1; dev_info(&dev->intf->dev, "Disconnecting %s\n", dev->name); flush_request_modules(dev); em28xx_close_extension(dev); if (dev->dev_next) em28xx_release_resources(dev->dev_next); em28xx_release_resources(dev); if (dev->dev_next) { kref_put(&dev->dev_next->ref, em28xx_free_device); dev->dev_next = NULL; } kref_put(&dev->ref, em28xx_free_device); } static int em28xx_usb_suspend(struct usb_interface *intf, pm_message_t message) { struct em28xx *dev; dev = usb_get_intfdata(intf); if (!dev) return 0; em28xx_suspend_extension(dev); return 0; } static int em28xx_usb_resume(struct usb_interface *intf) { struct em28xx *dev; dev = usb_get_intfdata(intf); if (!dev) return 0; em28xx_resume_extension(dev); return 0; } static struct usb_driver em28xx_usb_driver = { .name = "em28xx", .probe = em28xx_usb_probe, .disconnect = em28xx_usb_disconnect, .suspend = em28xx_usb_suspend, .resume = em28xx_usb_resume, .reset_resume = em28xx_usb_resume, .id_table = em28xx_id_table, }; module_usb_driver(em28xx_usb_driver);