/* * rtc-twl4030.c -- TWL4030 Real Time Clock interface * * Copyright (C) 2007 MontaVista Software, Inc * Author: Alexandre Rusev * * Based on original TI driver twl4030-rtc.c * Copyright (C) 2006 Texas Instruments, Inc. * * Based on rtc-omap.c * Copyright (C) 2003 MontaVista Software, Inc. * Author: George G. Davis or * Copyright (C) 2006 David Brownell * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ #include #include #include #include #include #include #include #include #include #include /* * RTC block register offsets (use TWL_MODULE_RTC) */ #define REG_SECONDS_REG 0x00 #define REG_MINUTES_REG 0x01 #define REG_HOURS_REG 0x02 #define REG_DAYS_REG 0x03 #define REG_MONTHS_REG 0x04 #define REG_YEARS_REG 0x05 #define REG_WEEKS_REG 0x06 #define REG_ALARM_SECONDS_REG 0x07 #define REG_ALARM_MINUTES_REG 0x08 #define REG_ALARM_HOURS_REG 0x09 #define REG_ALARM_DAYS_REG 0x0A #define REG_ALARM_MONTHS_REG 0x0B #define REG_ALARM_YEARS_REG 0x0C #define REG_RTC_CTRL_REG 0x0D #define REG_RTC_STATUS_REG 0x0E #define REG_RTC_INTERRUPTS_REG 0x0F #define REG_RTC_COMP_LSB_REG 0x10 #define REG_RTC_COMP_MSB_REG 0x11 /* RTC_CTRL_REG bitfields */ #define BIT_RTC_CTRL_REG_STOP_RTC_M 0x01 #define BIT_RTC_CTRL_REG_ROUND_30S_M 0x02 #define BIT_RTC_CTRL_REG_AUTO_COMP_M 0x04 #define BIT_RTC_CTRL_REG_MODE_12_24_M 0x08 #define BIT_RTC_CTRL_REG_TEST_MODE_M 0x10 #define BIT_RTC_CTRL_REG_SET_32_COUNTER_M 0x20 #define BIT_RTC_CTRL_REG_GET_TIME_M 0x40 /* RTC_STATUS_REG bitfields */ #define BIT_RTC_STATUS_REG_RUN_M 0x02 #define BIT_RTC_STATUS_REG_1S_EVENT_M 0x04 #define BIT_RTC_STATUS_REG_1M_EVENT_M 0x08 #define BIT_RTC_STATUS_REG_1H_EVENT_M 0x10 #define BIT_RTC_STATUS_REG_1D_EVENT_M 0x20 #define BIT_RTC_STATUS_REG_ALARM_M 0x40 #define BIT_RTC_STATUS_REG_POWER_UP_M 0x80 /* RTC_INTERRUPTS_REG bitfields */ #define BIT_RTC_INTERRUPTS_REG_EVERY_M 0x03 #define BIT_RTC_INTERRUPTS_REG_IT_TIMER_M 0x04 #define BIT_RTC_INTERRUPTS_REG_IT_ALARM_M 0x08 /* REG_SECONDS_REG through REG_YEARS_REG is how many registers? */ #define ALL_TIME_REGS 6 /*----------------------------------------------------------------------*/ /* * Supports 1 byte read from TWL4030 RTC register. */ static int twl4030_rtc_read_u8(u8 *data, u8 reg) { int ret; ret = twl4030_i2c_read_u8(TWL4030_MODULE_RTC, data, reg); if (ret < 0) pr_err("twl4030_rtc: Could not read TWL4030" "register %X - error %d\n", reg, ret); return ret; } /* * Supports 1 byte write to TWL4030 RTC registers. */ static int twl4030_rtc_write_u8(u8 data, u8 reg) { int ret; ret = twl4030_i2c_write_u8(TWL4030_MODULE_RTC, data, reg); if (ret < 0) pr_err("twl4030_rtc: Could not write TWL4030" "register %X - error %d\n", reg, ret); return ret; } /* * Cache the value for timer/alarm interrupts register; this is * only changed by callers holding rtc ops lock (or resume). */ static unsigned char rtc_irq_bits; /* * Enable 1/second update and/or alarm interrupts. */ static int set_rtc_irq_bit(unsigned char bit) { unsigned char val; int ret; val = rtc_irq_bits | bit; val &= ~BIT_RTC_INTERRUPTS_REG_EVERY_M; ret = twl4030_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG); if (ret == 0) rtc_irq_bits = val; return ret; } /* * Disable update and/or alarm interrupts. */ static int mask_rtc_irq_bit(unsigned char bit) { unsigned char val; int ret; val = rtc_irq_bits & ~bit; ret = twl4030_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG); if (ret == 0) rtc_irq_bits = val; return ret; } static int twl4030_rtc_alarm_irq_enable(struct device *dev, unsigned enabled) { int ret; if (enabled) ret = set_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); else ret = mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); return ret; } static int twl4030_rtc_update_irq_enable(struct device *dev, unsigned enabled) { int ret; if (enabled) ret = set_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M); else ret = mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M); return ret; } /* * Gets current TWL4030 RTC time and date parameters. * * The RTC's time/alarm representation is not what gmtime(3) requires * Linux to use: * * - Months are 1..12 vs Linux 0-11 * - Years are 0..99 vs Linux 1900..N (we assume 21st century) */ static int twl4030_rtc_read_time(struct device *dev, struct rtc_time *tm) { unsigned char rtc_data[ALL_TIME_REGS + 1]; int ret; u8 save_control; ret = twl4030_rtc_read_u8(&save_control, REG_RTC_CTRL_REG); if (ret < 0) return ret; save_control |= BIT_RTC_CTRL_REG_GET_TIME_M; ret = twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG); if (ret < 0) return ret; ret = twl4030_i2c_read(TWL4030_MODULE_RTC, rtc_data, REG_SECONDS_REG, ALL_TIME_REGS); if (ret < 0) { dev_err(dev, "rtc_read_time error %d\n", ret); return ret; } tm->tm_sec = bcd2bin(rtc_data[0]); tm->tm_min = bcd2bin(rtc_data[1]); tm->tm_hour = bcd2bin(rtc_data[2]); tm->tm_mday = bcd2bin(rtc_data[3]); tm->tm_mon = bcd2bin(rtc_data[4]) - 1; tm->tm_year = bcd2bin(rtc_data[5]) + 100; return ret; } static int twl4030_rtc_set_time(struct device *dev, struct rtc_time *tm) { unsigned char save_control; unsigned char rtc_data[ALL_TIME_REGS + 1]; int ret; rtc_data[1] = bin2bcd(tm->tm_sec); rtc_data[2] = bin2bcd(tm->tm_min); rtc_data[3] = bin2bcd(tm->tm_hour); rtc_data[4] = bin2bcd(tm->tm_mday); rtc_data[5] = bin2bcd(tm->tm_mon + 1); rtc_data[6] = bin2bcd(tm->tm_year - 100); /* Stop RTC while updating the TC registers */ ret = twl4030_rtc_read_u8(&save_control, REG_RTC_CTRL_REG); if (ret < 0) goto out; save_control &= ~BIT_RTC_CTRL_REG_STOP_RTC_M; twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG); if (ret < 0) goto out; /* update all the time registers in one shot */ ret = twl4030_i2c_write(TWL4030_MODULE_RTC, rtc_data, REG_SECONDS_REG, ALL_TIME_REGS); if (ret < 0) { dev_err(dev, "rtc_set_time error %d\n", ret); goto out; } /* Start back RTC */ save_control |= BIT_RTC_CTRL_REG_STOP_RTC_M; ret = twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG); out: return ret; } /* * Gets current TWL4030 RTC alarm time. */ static int twl4030_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm) { unsigned char rtc_data[ALL_TIME_REGS + 1]; int ret; ret = twl4030_i2c_read(TWL4030_MODULE_RTC, rtc_data, REG_ALARM_SECONDS_REG, ALL_TIME_REGS); if (ret < 0) { dev_err(dev, "rtc_read_alarm error %d\n", ret); return ret; } /* some of these fields may be wildcard/"match all" */ alm->time.tm_sec = bcd2bin(rtc_data[0]); alm->time.tm_min = bcd2bin(rtc_data[1]); alm->time.tm_hour = bcd2bin(rtc_data[2]); alm->time.tm_mday = bcd2bin(rtc_data[3]); alm->time.tm_mon = bcd2bin(rtc_data[4]) - 1; alm->time.tm_year = bcd2bin(rtc_data[5]) + 100; /* report cached alarm enable state */ if (rtc_irq_bits & BIT_RTC_INTERRUPTS_REG_IT_ALARM_M) alm->enabled = 1; return ret; } static int twl4030_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm) { unsigned char alarm_data[ALL_TIME_REGS + 1]; int ret; ret = twl4030_rtc_alarm_irq_enable(dev, 0); if (ret) goto out; alarm_data[1] = bin2bcd(alm->time.tm_sec); alarm_data[2] = bin2bcd(alm->time.tm_min); alarm_data[3] = bin2bcd(alm->time.tm_hour); alarm_data[4] = bin2bcd(alm->time.tm_mday); alarm_data[5] = bin2bcd(alm->time.tm_mon + 1); alarm_data[6] = bin2bcd(alm->time.tm_year - 100); /* update all the alarm registers in one shot */ ret = twl4030_i2c_write(TWL4030_MODULE_RTC, alarm_data, REG_ALARM_SECONDS_REG, ALL_TIME_REGS); if (ret) { dev_err(dev, "rtc_set_alarm error %d\n", ret); goto out; } if (alm->enabled) ret = twl4030_rtc_alarm_irq_enable(dev, 1); out: return ret; } static irqreturn_t twl4030_rtc_interrupt(int irq, void *rtc) { unsigned long events = 0; int ret = IRQ_NONE; int res; u8 rd_reg; #ifdef CONFIG_LOCKDEP /* WORKAROUND for lockdep forcing IRQF_DISABLED on us, which * we don't want and can't tolerate. Although it might be * friendlier not to borrow this thread context... */ local_irq_enable(); #endif res = twl4030_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG); if (res) goto out; /* * Figure out source of interrupt: ALARM or TIMER in RTC_STATUS_REG. * only one (ALARM or RTC) interrupt source may be enabled * at time, we also could check our results * by reading RTS_INTERRUPTS_REGISTER[IT_TIMER,IT_ALARM] */ if (rd_reg & BIT_RTC_STATUS_REG_ALARM_M) events |= RTC_IRQF | RTC_AF; else events |= RTC_IRQF | RTC_UF; res = twl4030_rtc_write_u8(rd_reg | BIT_RTC_STATUS_REG_ALARM_M, REG_RTC_STATUS_REG); if (res) goto out; /* Clear on Read enabled. RTC_IT bit of TWL4030_INT_PWR_ISR1 * needs 2 reads to clear the interrupt. One read is done in * do_twl4030_pwrirq(). Doing the second read, to clear * the bit. * * FIXME the reason PWR_ISR1 needs an extra read is that * RTC_IF retriggered until we cleared REG_ALARM_M above. * But re-reading like this is a bad hack; by doing so we * risk wrongly clearing status for some other IRQ (losing * the interrupt). Be smarter about handling RTC_UF ... */ res = twl4030_i2c_read_u8(TWL4030_MODULE_INT, &rd_reg, TWL4030_INT_PWR_ISR1); if (res) goto out; /* Notify RTC core on event */ rtc_update_irq(rtc, 1, events); ret = IRQ_HANDLED; out: return ret; } static struct rtc_class_ops twl4030_rtc_ops = { .read_time = twl4030_rtc_read_time, .set_time = twl4030_rtc_set_time, .read_alarm = twl4030_rtc_read_alarm, .set_alarm = twl4030_rtc_set_alarm, .alarm_irq_enable = twl4030_rtc_alarm_irq_enable, .update_irq_enable = twl4030_rtc_update_irq_enable, }; /*----------------------------------------------------------------------*/ static int __devinit twl4030_rtc_probe(struct platform_device *pdev) { struct rtc_device *rtc; int ret = 0; int irq = platform_get_irq(pdev, 0); u8 rd_reg; if (irq <= 0) return -EINVAL; rtc = rtc_device_register(pdev->name, &pdev->dev, &twl4030_rtc_ops, THIS_MODULE); if (IS_ERR(rtc)) { ret = PTR_ERR(rtc); dev_err(&pdev->dev, "can't register RTC device, err %ld\n", PTR_ERR(rtc)); goto out0; } platform_set_drvdata(pdev, rtc); ret = twl4030_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG); if (ret < 0) goto out1; if (rd_reg & BIT_RTC_STATUS_REG_POWER_UP_M) dev_warn(&pdev->dev, "Power up reset detected.\n"); if (rd_reg & BIT_RTC_STATUS_REG_ALARM_M) dev_warn(&pdev->dev, "Pending Alarm interrupt detected.\n"); /* Clear RTC Power up reset and pending alarm interrupts */ ret = twl4030_rtc_write_u8(rd_reg, REG_RTC_STATUS_REG); if (ret < 0) goto out1; ret = request_irq(irq, twl4030_rtc_interrupt, IRQF_TRIGGER_RISING, rtc->dev.bus_id, rtc); if (ret < 0) { dev_err(&pdev->dev, "IRQ is not free.\n"); goto out1; } /* Check RTC module status, Enable if it is off */ ret = twl4030_rtc_read_u8(&rd_reg, REG_RTC_CTRL_REG); if (ret < 0) goto out2; if (!(rd_reg & BIT_RTC_CTRL_REG_STOP_RTC_M)) { dev_info(&pdev->dev, "Enabling TWL4030-RTC.\n"); rd_reg = BIT_RTC_CTRL_REG_STOP_RTC_M; ret = twl4030_rtc_write_u8(rd_reg, REG_RTC_CTRL_REG); if (ret < 0) goto out2; } /* init cached IRQ enable bits */ ret = twl4030_rtc_read_u8(&rtc_irq_bits, REG_RTC_INTERRUPTS_REG); if (ret < 0) goto out2; return ret; out2: free_irq(irq, rtc); out1: rtc_device_unregister(rtc); out0: return ret; } /* * Disable all TWL4030 RTC module interrupts. * Sets status flag to free. */ static int __devexit twl4030_rtc_remove(struct platform_device *pdev) { /* leave rtc running, but disable irqs */ struct rtc_device *rtc = platform_get_drvdata(pdev); int irq = platform_get_irq(pdev, 0); mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M); free_irq(irq, rtc); rtc_device_unregister(rtc); platform_set_drvdata(pdev, NULL); return 0; } static void twl4030_rtc_shutdown(struct platform_device *pdev) { mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M | BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); } #ifdef CONFIG_PM static unsigned char irqstat; static int twl4030_rtc_suspend(struct platform_device *pdev, pm_message_t state) { irqstat = rtc_irq_bits; /* REVISIT alarm may need to wake us from sleep */ mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M | BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); return 0; } static int twl4030_rtc_resume(struct platform_device *pdev) { set_rtc_irq_bit(irqstat); return 0; } #else #define twl4030_rtc_suspend NULL #define twl4030_rtc_resume NULL #endif MODULE_ALIAS("platform:twl4030_rtc"); static struct platform_driver twl4030rtc_driver = { .probe = twl4030_rtc_probe, .remove = __devexit_p(twl4030_rtc_remove), .shutdown = twl4030_rtc_shutdown, .suspend = twl4030_rtc_suspend, .resume = twl4030_rtc_resume, .driver = { .owner = THIS_MODULE, .name = "twl4030_rtc", }, }; static int __init twl4030_rtc_init(void) { return platform_driver_register(&twl4030rtc_driver); } module_init(twl4030_rtc_init); static void __exit twl4030_rtc_exit(void) { platform_driver_unregister(&twl4030rtc_driver); } module_exit(twl4030_rtc_exit); MODULE_AUTHOR("Texas Instruments, MontaVista Software"); MODULE_LICENSE("GPL");