/* SPDX-License-Identifier: GPL-2.0 */ #ifndef _LINUX_KERNEL_H #define _LINUX_KERNEL_H #include <linux/stdarg.h> #include <linux/align.h> #include <linux/limits.h> #include <linux/linkage.h> #include <linux/stddef.h> #include <linux/types.h> #include <linux/compiler.h> #include <linux/bitops.h> #include <linux/kstrtox.h> #include <linux/log2.h> #include <linux/math.h> #include <linux/minmax.h> #include <linux/typecheck.h> #include <linux/panic.h> #include <linux/printk.h> #include <linux/build_bug.h> #include <linux/static_call_types.h> #include <asm/byteorder.h> #include <uapi/linux/kernel.h> #define STACK_MAGIC 0xdeadbeef /** * REPEAT_BYTE - repeat the value @x multiple times as an unsigned long value * @x: value to repeat * * NOTE: @x is not checked for > 0xff; larger values produce odd results. */ #define REPEAT_BYTE(x) ((~0ul / 0xff) * (x)) /* generic data direction definitions */ #define READ 0 #define WRITE 1 /** * ARRAY_SIZE - get the number of elements in array @arr * @arr: array to be sized */ #define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]) + __must_be_array(arr)) #define PTR_IF(cond, ptr) ((cond) ? (ptr) : NULL) #define u64_to_user_ptr(x) ( \ { \ typecheck(u64, (x)); \ (void __user *)(uintptr_t)(x); \ } \ ) #define typeof_member(T, m) typeof(((T*)0)->m) #define _RET_IP_ (unsigned long)__builtin_return_address(0) #define _THIS_IP_ ({ __label__ __here; __here: (unsigned long)&&__here; }) /** * upper_32_bits - return bits 32-63 of a number * @n: the number we're accessing * * A basic shift-right of a 64- or 32-bit quantity. Use this to suppress * the "right shift count >= width of type" warning when that quantity is * 32-bits. */ #define upper_32_bits(n) ((u32)(((n) >> 16) >> 16)) /** * lower_32_bits - return bits 0-31 of a number * @n: the number we're accessing */ #define lower_32_bits(n) ((u32)((n) & 0xffffffff)) /** * upper_16_bits - return bits 16-31 of a number * @n: the number we're accessing */ #define upper_16_bits(n) ((u16)((n) >> 16)) /** * lower_16_bits - return bits 0-15 of a number * @n: the number we're accessing */ #define lower_16_bits(n) ((u16)((n) & 0xffff)) struct completion; struct user; #ifdef CONFIG_PREEMPT_VOLUNTARY extern int __cond_resched(void); # define might_resched() __cond_resched() #elif defined(CONFIG_PREEMPT_DYNAMIC) extern int __cond_resched(void); DECLARE_STATIC_CALL(might_resched, __cond_resched); static __always_inline void might_resched(void) { static_call_mod(might_resched)(); } #else # define might_resched() do { } while (0) #endif /* CONFIG_PREEMPT_* */ #ifdef CONFIG_DEBUG_ATOMIC_SLEEP extern void ___might_sleep(const char *file, int line, int preempt_offset); extern void __might_sleep(const char *file, int line, int preempt_offset); extern void __cant_sleep(const char *file, int line, int preempt_offset); extern void __cant_migrate(const char *file, int line); /** * might_sleep - annotation for functions that can sleep * * this macro will print a stack trace if it is executed in an atomic * context (spinlock, irq-handler, ...). Additional sections where blocking is * not allowed can be annotated with non_block_start() and non_block_end() * pairs. * * This is a useful debugging help to be able to catch problems early and not * be bitten later when the calling function happens to sleep when it is not * supposed to. */ # define might_sleep() \ do { __might_sleep(__FILE__, __LINE__, 0); might_resched(); } while (0) /** * cant_sleep - annotation for functions that cannot sleep * * this macro will print a stack trace if it is executed with preemption enabled */ # define cant_sleep() \ do { __cant_sleep(__FILE__, __LINE__, 0); } while (0) # define sched_annotate_sleep() (current->task_state_change = 0) /** * cant_migrate - annotation for functions that cannot migrate * * Will print a stack trace if executed in code which is migratable */ # define cant_migrate() \ do { \ if (IS_ENABLED(CONFIG_SMP)) \ __cant_migrate(__FILE__, __LINE__); \ } while (0) /** * non_block_start - annotate the start of section where sleeping is prohibited * * This is on behalf of the oom reaper, specifically when it is calling the mmu * notifiers. The problem is that if the notifier were to block on, for example, * mutex_lock() and if the process which holds that mutex were to perform a * sleeping memory allocation, the oom reaper is now blocked on completion of * that memory allocation. Other blocking calls like wait_event() pose similar * issues. */ # define non_block_start() (current->non_block_count++) /** * non_block_end - annotate the end of section where sleeping is prohibited * * Closes a section opened by non_block_start(). */ # define non_block_end() WARN_ON(current->non_block_count-- == 0) #else static inline void ___might_sleep(const char *file, int line, int preempt_offset) { } static inline void __might_sleep(const char *file, int line, int preempt_offset) { } # define might_sleep() do { might_resched(); } while (0) # define cant_sleep() do { } while (0) # define cant_migrate() do { } while (0) # define sched_annotate_sleep() do { } while (0) # define non_block_start() do { } while (0) # define non_block_end() do { } while (0) #endif #define might_sleep_if(cond) do { if (cond) might_sleep(); } while (0) #if defined(CONFIG_MMU) && \ (defined(CONFIG_PROVE_LOCKING) || defined(CONFIG_DEBUG_ATOMIC_SLEEP)) #define might_fault() __might_fault(__FILE__, __LINE__) void __might_fault(const char *file, int line); #else static inline void might_fault(void) { } #endif void do_exit(long error_code) __noreturn; void complete_and_exit(struct completion *, long) __noreturn; extern int num_to_str(char *buf, int size, unsigned long long num, unsigned int width); /* lib/printf utilities */ extern __printf(2, 3) int sprintf(char *buf, const char * fmt, ...); extern __printf(2, 0) int vsprintf(char *buf, const char *, va_list); extern __printf(3, 4) int snprintf(char *buf, size_t size, const char *fmt, ...); extern __printf(3, 0) int vsnprintf(char *buf, size_t size, const char *fmt, va_list args); extern __printf(3, 4) int scnprintf(char *buf, size_t size, const char *fmt, ...); extern __printf(3, 0) int vscnprintf(char *buf, size_t size, const char *fmt, va_list args); extern __printf(2, 3) __malloc char *kasprintf(gfp_t gfp, const char *fmt, ...); extern __printf(2, 0) __malloc char *kvasprintf(gfp_t gfp, const char *fmt, va_list args); extern __printf(2, 0) const char *kvasprintf_const(gfp_t gfp, const char *fmt, va_list args); extern __scanf(2, 3) int sscanf(const char *, const char *, ...); extern __scanf(2, 0) int vsscanf(const char *, const char *, va_list); extern int no_hash_pointers_enable(char *str); extern int get_option(char **str, int *pint); extern char *get_options(const char *str, int nints, int *ints); extern unsigned long long memparse(const char *ptr, char **retptr); extern bool parse_option_str(const char *str, const char *option); extern char *next_arg(char *args, char **param, char **val); extern int core_kernel_text(unsigned long addr); extern int init_kernel_text(unsigned long addr); extern int core_kernel_data(unsigned long addr); extern int __kernel_text_address(unsigned long addr); extern int kernel_text_address(unsigned long addr); extern int func_ptr_is_kernel_text(void *ptr); extern void bust_spinlocks(int yes); extern int root_mountflags; extern bool early_boot_irqs_disabled; /* * Values used for system_state. Ordering of the states must not be changed * as code checks for <, <=, >, >= STATE. */ extern enum system_states { SYSTEM_BOOTING, SYSTEM_SCHEDULING, SYSTEM_FREEING_INITMEM, SYSTEM_RUNNING, SYSTEM_HALT, SYSTEM_POWER_OFF, SYSTEM_RESTART, SYSTEM_SUSPEND, } system_state; extern const char hex_asc[]; #define hex_asc_lo(x) hex_asc[((x) & 0x0f)] #define hex_asc_hi(x) hex_asc[((x) & 0xf0) >> 4] static inline char *hex_byte_pack(char *buf, u8 byte) { *buf++ = hex_asc_hi(byte); *buf++ = hex_asc_lo(byte); return buf; } extern const char hex_asc_upper[]; #define hex_asc_upper_lo(x) hex_asc_upper[((x) & 0x0f)] #define hex_asc_upper_hi(x) hex_asc_upper[((x) & 0xf0) >> 4] static inline char *hex_byte_pack_upper(char *buf, u8 byte) { *buf++ = hex_asc_upper_hi(byte); *buf++ = hex_asc_upper_lo(byte); return buf; } extern int hex_to_bin(char ch); extern int __must_check hex2bin(u8 *dst, const char *src, size_t count); extern char *bin2hex(char *dst, const void *src, size_t count); bool mac_pton(const char *s, u8 *mac); /* * General tracing related utility functions - trace_printk(), * tracing_on/tracing_off and tracing_start()/tracing_stop * * Use tracing_on/tracing_off when you want to quickly turn on or off * tracing. It simply enables or disables the recording of the trace events. * This also corresponds to the user space /sys/kernel/debug/tracing/tracing_on * file, which gives a means for the kernel and userspace to interact. * Place a tracing_off() in the kernel where you want tracing to end. * From user space, examine the trace, and then echo 1 > tracing_on * to continue tracing. * * tracing_stop/tracing_start has slightly more overhead. It is used * by things like suspend to ram where disabling the recording of the * trace is not enough, but tracing must actually stop because things * like calling smp_processor_id() may crash the system. * * Most likely, you want to use tracing_on/tracing_off. */ enum ftrace_dump_mode { DUMP_NONE, DUMP_ALL, DUMP_ORIG, }; #ifdef CONFIG_TRACING void tracing_on(void); void tracing_off(void); int tracing_is_on(void); void tracing_snapshot(void); void tracing_snapshot_alloc(void); extern void tracing_start(void); extern void tracing_stop(void); static inline __printf(1, 2) void ____trace_printk_check_format(const char *fmt, ...) { } #define __trace_printk_check_format(fmt, args...) \ do { \ if (0) \ ____trace_printk_check_format(fmt, ##args); \ } while (0) /** * trace_printk - printf formatting in the ftrace buffer * @fmt: the printf format for printing * * Note: __trace_printk is an internal function for trace_printk() and * the @ip is passed in via the trace_printk() macro. * * This function allows a kernel developer to debug fast path sections * that printk is not appropriate for. By scattering in various * printk like tracing in the code, a developer can quickly see * where problems are occurring. * * This is intended as a debugging tool for the developer only. * Please refrain from leaving trace_printks scattered around in * your code. (Extra memory is used for special buffers that are * allocated when trace_printk() is used.) * * A little optimization trick is done here. If there's only one * argument, there's no need to scan the string for printf formats. * The trace_puts() will suffice. But how can we take advantage of * using trace_puts() when trace_printk() has only one argument? * By stringifying the args and checking the size we can tell * whether or not there are args. __stringify((__VA_ARGS__)) will * turn into "()\0" with a size of 3 when there are no args, anything * else will be bigger. All we need to do is define a string to this, * and then take its size and compare to 3. If it's bigger, use * do_trace_printk() otherwise, optimize it to trace_puts(). Then just * let gcc optimize the rest. */ #define trace_printk(fmt, ...) \ do { \ char _______STR[] = __stringify((__VA_ARGS__)); \ if (sizeof(_______STR) > 3) \ do_trace_printk(fmt, ##__VA_ARGS__); \ else \ trace_puts(fmt); \ } while (0) #define do_trace_printk(fmt, args...) \ do { \ static const char *trace_printk_fmt __used \ __section("__trace_printk_fmt") = \ __builtin_constant_p(fmt) ? fmt : NULL; \ \ __trace_printk_check_format(fmt, ##args); \ \ if (__builtin_constant_p(fmt)) \ __trace_bprintk(_THIS_IP_, trace_printk_fmt, ##args); \ else \ __trace_printk(_THIS_IP_, fmt, ##args); \ } while (0) extern __printf(2, 3) int __trace_bprintk(unsigned long ip, const char *fmt, ...); extern __printf(2, 3) int __trace_printk(unsigned long ip, const char *fmt, ...); /** * trace_puts - write a string into the ftrace buffer * @str: the string to record * * Note: __trace_bputs is an internal function for trace_puts and * the @ip is passed in via the trace_puts macro. * * This is similar to trace_printk() but is made for those really fast * paths that a developer wants the least amount of "Heisenbug" effects, * where the processing of the print format is still too much. * * This function allows a kernel developer to debug fast path sections * that printk is not appropriate for. By scattering in various * printk like tracing in the code, a developer can quickly see * where problems are occurring. * * This is intended as a debugging tool for the developer only. * Please refrain from leaving trace_puts scattered around in * your code. (Extra memory is used for special buffers that are * allocated when trace_puts() is used.) * * Returns: 0 if nothing was written, positive # if string was. * (1 when __trace_bputs is used, strlen(str) when __trace_puts is used) */ #define trace_puts(str) ({ \ static const char *trace_printk_fmt __used \ __section("__trace_printk_fmt") = \ __builtin_constant_p(str) ? str : NULL; \ \ if (__builtin_constant_p(str)) \ __trace_bputs(_THIS_IP_, trace_printk_fmt); \ else \ __trace_puts(_THIS_IP_, str, strlen(str)); \ }) extern int __trace_bputs(unsigned long ip, const char *str); extern int __trace_puts(unsigned long ip, const char *str, int size); extern void trace_dump_stack(int skip); /* * The double __builtin_constant_p is because gcc will give us an error * if we try to allocate the static variable to fmt if it is not a * constant. Even with the outer if statement. */ #define ftrace_vprintk(fmt, vargs) \ do { \ if (__builtin_constant_p(fmt)) { \ static const char *trace_printk_fmt __used \ __section("__trace_printk_fmt") = \ __builtin_constant_p(fmt) ? fmt : NULL; \ \ __ftrace_vbprintk(_THIS_IP_, trace_printk_fmt, vargs); \ } else \ __ftrace_vprintk(_THIS_IP_, fmt, vargs); \ } while (0) extern __printf(2, 0) int __ftrace_vbprintk(unsigned long ip, const char *fmt, va_list ap); extern __printf(2, 0) int __ftrace_vprintk(unsigned long ip, const char *fmt, va_list ap); extern void ftrace_dump(enum ftrace_dump_mode oops_dump_mode); #else static inline void tracing_start(void) { } static inline void tracing_stop(void) { } static inline void trace_dump_stack(int skip) { } static inline void tracing_on(void) { } static inline void tracing_off(void) { } static inline int tracing_is_on(void) { return 0; } static inline void tracing_snapshot(void) { } static inline void tracing_snapshot_alloc(void) { } static inline __printf(1, 2) int trace_printk(const char *fmt, ...) { return 0; } static __printf(1, 0) inline int ftrace_vprintk(const char *fmt, va_list ap) { return 0; } static inline void ftrace_dump(enum ftrace_dump_mode oops_dump_mode) { } #endif /* CONFIG_TRACING */ /* This counts to 12. Any more, it will return 13th argument. */ #define __COUNT_ARGS(_0, _1, _2, _3, _4, _5, _6, _7, _8, _9, _10, _11, _12, _n, X...) _n #define COUNT_ARGS(X...) __COUNT_ARGS(, ##X, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0) #define __CONCAT(a, b) a ## b #define CONCATENATE(a, b) __CONCAT(a, b) /** * container_of - cast a member of a structure out to the containing structure * @ptr: the pointer to the member. * @type: the type of the container struct this is embedded in. * @member: the name of the member within the struct. * */ #define container_of(ptr, type, member) ({ \ void *__mptr = (void *)(ptr); \ BUILD_BUG_ON_MSG(!__same_type(*(ptr), ((type *)0)->member) && \ !__same_type(*(ptr), void), \ "pointer type mismatch in container_of()"); \ ((type *)(__mptr - offsetof(type, member))); }) /** * container_of_safe - cast a member of a structure out to the containing structure * @ptr: the pointer to the member. * @type: the type of the container struct this is embedded in. * @member: the name of the member within the struct. * * If IS_ERR_OR_NULL(ptr), ptr is returned unchanged. */ #define container_of_safe(ptr, type, member) ({ \ void *__mptr = (void *)(ptr); \ BUILD_BUG_ON_MSG(!__same_type(*(ptr), ((type *)0)->member) && \ !__same_type(*(ptr), void), \ "pointer type mismatch in container_of()"); \ IS_ERR_OR_NULL(__mptr) ? ERR_CAST(__mptr) : \ ((type *)(__mptr - offsetof(type, member))); }) /* Rebuild everything on CONFIG_FTRACE_MCOUNT_RECORD */ #ifdef CONFIG_FTRACE_MCOUNT_RECORD # define REBUILD_DUE_TO_FTRACE_MCOUNT_RECORD #endif /* Permissions on a sysfs file: you didn't miss the 0 prefix did you? */ #define VERIFY_OCTAL_PERMISSIONS(perms) \ (BUILD_BUG_ON_ZERO((perms) < 0) + \ BUILD_BUG_ON_ZERO((perms) > 0777) + \ /* USER_READABLE >= GROUP_READABLE >= OTHER_READABLE */ \ BUILD_BUG_ON_ZERO((((perms) >> 6) & 4) < (((perms) >> 3) & 4)) + \ BUILD_BUG_ON_ZERO((((perms) >> 3) & 4) < ((perms) & 4)) + \ /* USER_WRITABLE >= GROUP_WRITABLE */ \ BUILD_BUG_ON_ZERO((((perms) >> 6) & 2) < (((perms) >> 3) & 2)) + \ /* OTHER_WRITABLE? Generally considered a bad idea. */ \ BUILD_BUG_ON_ZERO((perms) & 2) + \ (perms)) #endif