# SPDX-License-Identifier: GPL-2.0-only config SND_SOC_INTEL_SST_TOPLEVEL bool "Intel ASoC SST drivers" default y depends on X86 || COMPILE_TEST select SND_SOC_INTEL_MACH help Intel ASoC SST Platform Drivers. If you have a Intel machine that has an audio controller with a DSP and I2S or DMIC port, then enable this option by saying Y Note that the answer to this question doesn't directly affect the kernel: saying N will just cause the configurator to skip all the questions about Intel SST drivers. if SND_SOC_INTEL_SST_TOPLEVEL config SND_SOC_INTEL_SST tristate config SND_SOC_INTEL_CATPT tristate "Haswell and Broadwell" depends on ACPI || COMPILE_TEST depends on DMADEVICES && SND_DMA_SGBUF select DW_DMAC_CORE select SND_SOC_ACPI_INTEL_MATCH select WANT_DEV_COREDUMP select SND_INTEL_DSP_CONFIG help Enable support for Intel(R) Haswell and Broadwell platforms with I2S codec present. This is a recommended option. Say Y or m if you have such device. If unsure, say N. config SND_SOC_INTEL_HASWELL tristate select SND_SOC_INTEL_CATPT config SND_SST_ATOM_HIFI2_PLATFORM tristate select SND_SOC_COMPRESS config SND_SST_ATOM_HIFI2_PLATFORM_PCI tristate "PCI HiFi2 (Merrifield) Platforms" depends on X86 && PCI select SND_SST_ATOM_HIFI2_PLATFORM help If you have a Intel Merrifield/Edison platform, then enable this option by saying Y or m. Distros will typically not enable this option: while Merrifield/Edison can run a mainline kernel with limited functionality it will require a firmware file which is not in the standard firmware tree config SND_SST_ATOM_HIFI2_PLATFORM_ACPI tristate "ACPI HiFi2 (Baytrail, Cherrytrail) Platforms" default ACPI depends on X86 && ACPI && PCI select SND_SST_ATOM_HIFI2_PLATFORM select SND_SOC_ACPI_INTEL_MATCH select SND_INTEL_DSP_CONFIG select IOSF_MBI help If you have a Intel Baytrail or Cherrytrail platform with an I2S codec, then enable this option by saying Y or m. This is a recommended option This option is mutually exclusive with the SOF support on Baytrail/Cherrytrail. If you want to enable SOF on Baytrail/Cherrytrail, you need to deselect this option first. config SND_SOC_INTEL_SKYLAKE tristate "All Skylake/SST Platforms" depends on PCI && ACPI depends on COMMON_CLK select SND_SOC_INTEL_SKL select SND_SOC_INTEL_APL select SND_SOC_INTEL_KBL select SND_SOC_INTEL_GLK select SND_SOC_INTEL_CNL select SND_SOC_INTEL_CFL help This is a backwards-compatible option to select all devices supported by the Intel SST/Skylake driver. This option is no longer recommended and will be deprecated when the SOF driver is introduced. Distributions should explicitly select which platform uses this driver. config SND_SOC_INTEL_SKL tristate "Skylake Platforms" depends on PCI && ACPI depends on COMMON_CLK select SND_SOC_INTEL_SKYLAKE_FAMILY help If you have a Intel Skylake platform with the DSP enabled in the BIOS then enable this option by saying Y or m. config SND_SOC_INTEL_APL tristate "Broxton/ApolloLake Platforms" depends on PCI && ACPI depends on COMMON_CLK select SND_SOC_INTEL_SKYLAKE_FAMILY help If you have a Intel Broxton/ApolloLake platform with the DSP enabled in the BIOS then enable this option by saying Y or m. config SND_SOC_INTEL_KBL tristate "Kabylake Platforms" depends on PCI && ACPI depends on COMMON_CLK select SND_SOC_INTEL_SKYLAKE_FAMILY help If you have a Intel Kabylake platform with the DSP enabled in the BIOS then enable this option by saying Y or m. config SND_SOC_INTEL_GLK tristate "GeminiLake Platforms" depends on PCI && ACPI depends on COMMON_CLK select SND_SOC_INTEL_SKYLAKE_FAMILY help If you have a Intel GeminiLake platform with the DSP enabled in the BIOS then enable this option by saying Y or m. config SND_SOC_INTEL_CNL tristate "CannonLake/WhiskyLake Platforms" depends on PCI && ACPI depends on COMMON_CLK select SND_SOC_INTEL_SKYLAKE_FAMILY help If you have a Intel CNL/WHL platform with the DSP enabled in the BIOS then enable this option by saying Y or m. config SND_SOC_INTEL_CFL tristate "CoffeeLake Platforms" depends on PCI && ACPI depends on COMMON_CLK select SND_SOC_INTEL_SKYLAKE_FAMILY help If you have a Intel CoffeeLake platform with the DSP enabled in the BIOS then enable this option by saying Y or m. config SND_SOC_INTEL_CML_H tristate "CometLake-H Platforms" depends on PCI && ACPI depends on COMMON_CLK select SND_SOC_INTEL_SKYLAKE_FAMILY help If you have a Intel CometLake-H platform with the DSP enabled in the BIOS then enable this option by saying Y or m. config SND_SOC_INTEL_CML_LP tristate "CometLake-LP Platforms" depends on PCI && ACPI depends on COMMON_CLK select SND_SOC_INTEL_SKYLAKE_FAMILY help If you have a Intel CometLake-LP platform with the DSP enabled in the BIOS then enable this option by saying Y or m. config SND_SOC_INTEL_SKYLAKE_FAMILY tristate select SND_SOC_INTEL_SKYLAKE_COMMON if SND_SOC_INTEL_SKYLAKE_FAMILY config SND_SOC_INTEL_SKYLAKE_SSP_CLK tristate config SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC bool "HDAudio codec support" help If you have Intel Skylake or Kabylake with HDAudio codec and DMIC present then enable this option by saying Y. config SND_SOC_INTEL_SKYLAKE_COMMON tristate select SND_HDA_EXT_CORE select SND_HDA_DSP_LOADER select SND_SOC_TOPOLOGY select SND_SOC_INTEL_SST select SND_SOC_HDAC_HDA if SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC select SND_SOC_ACPI_INTEL_MATCH select SND_INTEL_DSP_CONFIG help If you have a Intel Skylake/Broxton/ApolloLake/KabyLake/ GeminiLake or CannonLake platform with the DSP enabled in the BIOS then enable this option by saying Y or m. endif ## SND_SOC_INTEL_SKYLAKE_FAMILY endif ## SND_SOC_INTEL_SST_TOPLEVEL if SND_SOC_INTEL_SST_TOPLEVEL || SND_SOC_SOF_INTEL_TOPLEVEL config SND_SOC_ACPI_INTEL_MATCH tristate select SND_SOC_ACPI if ACPI # this option controls the compilation of ACPI matching tables and # helpers and is not meant to be selected by the user. endif ## SND_SOC_INTEL_SST_TOPLEVEL || SND_SOC_SOF_INTEL_TOPLEVEL config SND_SOC_INTEL_KEEMBAY tristate "Keembay Platforms" depends on ARCH_KEEMBAY || COMPILE_TEST depends on COMMON_CLK select SND_DMAENGINE_PCM select SND_SOC_GENERIC_DMAENGINE_PCM help If you have a Intel Keembay platform then enable this option by saying Y or m. config SND_SOC_INTEL_AVS tristate "Intel AVS driver" depends on X86 || COMPILE_TEST depends on PCI depends on COMMON_CLK select SND_SOC_ACPI if ACPI select SND_SOC_TOPOLOGY select SND_HDA_EXT_CORE select SND_HDA_DSP_LOADER select SND_INTEL_DSP_CONFIG help Enable support for Intel(R) cAVS 1.5 platforms with DSP capabilities. This includes Skylake, Kabylake, Amberlake and Apollolake. # ASoC codec drivers source "sound/soc/intel/boards/Kconfig"