1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
|
# SPDX-License-Identifier: GPL-2.0-only
%YAML 1.2
---
$id: http://devicetree.org/schemas/gpu/arm,mali-bifrost.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: ARM Mali Bifrost GPU
maintainers:
- Rob Herring <robh@kernel.org>
properties:
$nodename:
pattern: '^gpu@[a-f0-9]+$'
compatible:
items:
- enum:
- amlogic,meson-g12a-mali
- mediatek,mt8183-mali
- realtek,rtd1619-mali
- renesas,r9a07g044-mali
- rockchip,px30-mali
- rockchip,rk3568-mali
- const: arm,mali-bifrost # Mali Bifrost GPU model/revision is fully discoverable
reg:
maxItems: 1
interrupts:
minItems: 3
items:
- description: Job interrupt
- description: MMU interrupt
- description: GPU interrupt
- description: Event interrupt
interrupt-names:
minItems: 3
items:
- const: job
- const: mmu
- const: gpu
- const: event
clocks:
minItems: 1
maxItems: 3
clock-names: true
mali-supply: true
sram-supply: true
operating-points-v2: true
power-domains:
minItems: 1
maxItems: 3
resets:
minItems: 1
maxItems: 3
reset-names: true
"#cooling-cells":
const: 2
dynamic-power-coefficient:
$ref: '/schemas/types.yaml#/definitions/uint32'
description:
A u32 value that represents the running time dynamic
power coefficient in units of uW/MHz/V^2. The
coefficient can either be calculated from power
measurements or derived by analysis.
The dynamic power consumption of the GPU is
proportional to the square of the Voltage (V) and
the clock frequency (f). The coefficient is used to
calculate the dynamic power as below -
Pdyn = dynamic-power-coefficient * V^2 * f
where voltage is in V, frequency is in MHz.
dma-coherent: true
required:
- compatible
- reg
- interrupts
- interrupt-names
- clocks
additionalProperties: false
allOf:
- if:
properties:
compatible:
contains:
const: amlogic,meson-g12a-mali
then:
required:
- resets
- if:
properties:
compatible:
contains:
const: renesas,r9a07g044-mali
then:
properties:
interrupts:
minItems: 4
interrupt-names:
minItems: 4
clocks:
minItems: 3
clock-names:
items:
- const: gpu
- const: bus
- const: bus_ace
resets:
minItems: 3
reset-names:
items:
- const: rst
- const: axi_rst
- const: ace_rst
required:
- clock-names
- power-domains
- resets
- reset-names
- if:
properties:
compatible:
contains:
const: mediatek,mt8183-mali
then:
properties:
power-domains:
minItems: 3
power-domain-names:
items:
- const: core0
- const: core1
- const: core2
required:
- sram-supply
- power-domains
- power-domain-names
else:
properties:
power-domains:
maxItems: 1
sram-supply: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
gpu@ffe40000 {
compatible = "amlogic,meson-g12a-mali", "arm,mali-bifrost";
reg = <0xffe40000 0x10000>;
interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "job", "mmu", "gpu";
clocks = <&clk 1>;
mali-supply = <&vdd_gpu>;
operating-points-v2 = <&gpu_opp_table>;
resets = <&reset 0>, <&reset 1>;
};
gpu_opp_table: opp-table {
compatible = "operating-points-v2";
opp-533000000 {
opp-hz = /bits/ 64 <533000000>;
opp-microvolt = <1250000>;
};
opp-450000000 {
opp-hz = /bits/ 64 <450000000>;
opp-microvolt = <1150000>;
};
opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
opp-microvolt = <1125000>;
};
opp-350000000 {
opp-hz = /bits/ 64 <350000000>;
opp-microvolt = <1075000>;
};
opp-266000000 {
opp-hz = /bits/ 64 <266000000>;
opp-microvolt = <1025000>;
};
opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
opp-microvolt = <925000>;
};
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <912500>;
};
};
...
|
