blob: 168beeb7e9f7dd7e041988c5b76c62a642299911 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
|
# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/mailbox/qcom-ipcc.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Technologies, Inc. Inter-Processor Communication Controller
maintainers:
- Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
description:
The Inter-Processor Communication Controller (IPCC) is a centralized hardware
to route interrupts across various subsystems. It involves a three-level
addressing scheme called protocol, client and signal. For example, consider an
entity on the Application Processor Subsystem (APSS) that wants to listen to
Modem's interrupts via Shared Memory Point to Point (SMP2P) interface. In such
a case, the client would be Modem (client-id is 2) and the signal would be
SMP2P (signal-id is 2). The SMP2P itself falls under the Multiprocessor (MPROC)
protocol (protocol-id is 0). Refer include/dt-bindings/mailbox/qcom-ipcc.h
for the list of such IDs.
properties:
compatible:
items:
- enum:
- qcom,sm8250-ipcc
- const: qcom,ipcc
reg:
maxItems: 1
interrupts:
maxItems: 1
interrupt-controller: true
"#interrupt-cells":
const: 3
description:
The first cell is the client-id, the second cell is the signal-id and the
third cell is the interrupt type.
"#mbox-cells":
const: 2
description:
The first cell is the client-id, and the second cell is the signal-id.
required:
- compatible
- reg
- interrupts
- interrupt-controller
- "#interrupt-cells"
- "#mbox-cells"
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
mailbox@408000 {
compatible = "qcom,sm8250-ipcc", "qcom,ipcc";
reg = <0x408000 0x1000>;
interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <3>;
#mbox-cells = <2>;
};
smp2p-modem {
compatible = "qcom,smp2p";
interrupts-extended = <&ipcc_mproc IPCC_CLIENT_MPSS
IPCC_MPROC_SIGNAL_SMP2P IRQ_TYPE_EDGE_RISING>;
mboxes = <&ipcc_mproc IPCC_CLIENT_MPSS IPCC_MPROC_SIGNAL_SMP2P>;
/* Other SMP2P fields */
};
|
