1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/media/ti,cal.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Texas Instruments DRA72x CAMERA ADAPTATION LAYER (CAL)
maintainers:
- Benoit Parrot <bparrot@ti.com>
description: |-
The Camera Adaptation Layer (CAL) is a key component for image capture
applications. The capture module provides the system interface and the
processing capability to connect CSI2 image-sensor modules to the
DRA72x device.
CAL supports 2 camera port nodes on MIPI bus.
properties:
compatible:
enum:
# for DRA72 controllers
- ti,dra72-cal
# for DRA72 controllers pre ES2.0
- ti,dra72-pre-es2-cal
# for DRA76 controllers
- ti,dra76-cal
# for AM654 controllers
- ti,am654-cal
reg:
minItems: 2
items:
- description: The CAL main register region
- description: The RX Core0 (DPHY0) register region
- description: The RX Core1 (DPHY1) register region
reg-names:
minItems: 2
items:
- const: cal_top
- const: cal_rx_core0
- const: cal_rx_core1
interrupts:
maxItems: 1
ti,camerrx-control:
$ref: "/schemas/types.yaml#/definitions/phandle-array"
items:
- items:
- description: phandle to device control module
- description: offset to the control_camerarx_core register
description:
phandle to the device control module and offset to the
control_camerarx_core register
clocks:
maxItems: 1
clock-names:
const: fck
power-domains:
description:
List of phandle and PM domain specifier as documented in
Documentation/devicetree/bindings/power/power_domain.txt
maxItems: 1
ports:
$ref: /schemas/graph.yaml#/properties/ports
properties:
port@0:
$ref: /schemas/graph.yaml#/$defs/port-base
unevaluatedProperties: false
description: CSI2 Port #0
properties:
endpoint:
$ref: video-interfaces.yaml#
unevaluatedProperties: false
properties:
clock-lanes:
maxItems: 1
data-lanes:
minItems: 1
maxItems: 4
port@1:
$ref: /schemas/graph.yaml#/$defs/port-base
unevaluatedProperties: false
description: CSI2 Port #1
properties:
endpoint:
$ref: video-interfaces.yaml#
unevaluatedProperties: false
properties:
clock-lanes:
maxItems: 1
data-lanes:
minItems: 1
maxItems: 4
required:
- port@0
required:
- compatible
- reg
- reg-names
- interrupts
- ti,camerrx-control
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
cal: cal@4845b000 {
compatible = "ti,dra72-cal";
reg = <0x4845B000 0x400>,
<0x4845B800 0x40>,
<0x4845B900 0x40>;
reg-names = "cal_top",
"cal_rx_core0",
"cal_rx_core1";
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
ti,camerrx-control = <&scm_conf 0xE94>;
ports {
#address-cells = <1>;
#size-cells = <0>;
csi2_0: port@0 {
reg = <0>;
csi2_phy0: endpoint {
remote-endpoint = <&csi2_cam0>;
clock-lanes = <0>;
data-lanes = <1 2>;
};
};
};
};
i2c {
clock-frequency = <400000>;
#address-cells = <1>;
#size-cells = <0>;
camera-sensor@3c {
compatible = "ovti,ov5640";
reg = <0x3c>;
AVDD-supply = <®_2p8v>;
DOVDD-supply = <®_1p8v>;
DVDD-supply = <®_1p5v>;
clocks = <&clk_ov5640_fixed>;
clock-names = "xclk";
port {
csi2_cam0: endpoint {
remote-endpoint = <&csi2_phy0>;
clock-lanes = <0>;
data-lanes = <1 2>;
};
};
};
};
...
|
