1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
|
Atheros AR9331 built-in switch
=============================
It is a switch built-in to Atheros AR9331 WiSoC and addressable over internal
MDIO bus. All PHYs are built-in as well.
Required properties:
- compatible: should be: "qca,ar9331-switch"
- reg: Address on the MII bus for the switch.
- resets : Must contain an entry for each entry in reset-names.
- reset-names : Must include the following entries: "switch"
- interrupt-parent: Phandle to the parent interrupt controller
- interrupts: IRQ line for the switch
- interrupt-controller: Indicates the switch is itself an interrupt
controller. This is used for the PHY interrupts.
- #interrupt-cells: must be 1
- mdio: Container of PHY and devices on the switches MDIO bus.
See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
required and optional properties.
Examples:
eth0: ethernet@19000000 {
compatible = "qca,ar9330-eth";
reg = <0x19000000 0x200>;
interrupts = <4>;
resets = <&rst 9>, <&rst 22>;
reset-names = "mac", "mdio";
clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>;
clock-names = "eth", "mdio";
phy-mode = "mii";
phy-handle = <&phy_port4>;
};
eth1: ethernet@1a000000 {
compatible = "qca,ar9330-eth";
reg = <0x1a000000 0x200>;
interrupts = <5>;
resets = <&rst 13>, <&rst 23>;
reset-names = "mac", "mdio";
clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>;
clock-names = "eth", "mdio";
phy-mode = "gmii";
fixed-link {
speed = <1000>;
full-duplex;
};
mdio {
#address-cells = <1>;
#size-cells = <0>;
switch10: switch@10 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "qca,ar9331-switch";
reg = <0x10>;
resets = <&rst 8>;
reset-names = "switch";
interrupt-parent = <&miscintc>;
interrupts = <12>;
interrupt-controller;
#interrupt-cells = <1>;
ports {
#address-cells = <1>;
#size-cells = <0>;
switch_port0: port@0 {
reg = <0x0>;
label = "cpu";
ethernet = <ð1>;
phy-mode = "gmii";
fixed-link {
speed = <1000>;
full-duplex;
};
};
switch_port1: port@1 {
reg = <0x1>;
phy-handle = <&phy_port0>;
phy-mode = "internal";
};
switch_port2: port@2 {
reg = <0x2>;
phy-handle = <&phy_port1>;
phy-mode = "internal";
};
switch_port3: port@3 {
reg = <0x3>;
phy-handle = <&phy_port2>;
phy-mode = "internal";
};
switch_port4: port@4 {
reg = <0x4>;
phy-handle = <&phy_port3>;
phy-mode = "internal";
};
};
mdio {
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = <&switch10>;
phy_port0: phy@0 {
reg = <0x0>;
interrupts = <0>;
};
phy_port1: phy@1 {
reg = <0x1>;
interrupts = <0>;
};
phy_port2: phy@2 {
reg = <0x2>;
interrupts = <0>;
};
phy_port3: phy@3 {
reg = <0x3>;
interrupts = <0>;
};
phy_port4: phy@4 {
reg = <0x4>;
interrupts = <0>;
};
};
};
};
};
|
