1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/opp/opp-v2-kryo-cpu.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Technologies, Inc. NVMEM OPP bindings
maintainers:
- Ilia Lin <ilia.lin@kernel.org>
allOf:
- $ref: opp-v2-base.yaml#
description: |
In certain Qualcomm Technologies, Inc. SoCs like APQ8096 and MSM8996,
the CPU frequencies subset and voltage value of each OPP varies based on
the silicon variant in use.
Qualcomm Technologies, Inc. Process Voltage Scaling Tables
defines the voltage and frequency value based on the msm-id in SMEM
and speedbin blown in the efuse combination.
The qcom-cpufreq-nvmem driver reads the msm-id and efuse value from the SoC
to provide the OPP framework with required information (existing HW bitmap).
This is used to determine the voltage and frequency value for each OPP of
operating-points-v2 table when it is parsed by the OPP framework.
properties:
compatible:
const: operating-points-v2-kryo-cpu
nvmem-cells:
description: |
A phandle pointing to a nvmem-cells node representing the
efuse registers that has information about the
speedbin that is used to select the right frequency/voltage
value pair.
opp-shared: true
patternProperties:
'^opp-?[0-9]+$':
type: object
properties:
opp-hz: true
opp-microvolt: true
opp-supported-hw:
description: |
A single 32 bit bitmap value, representing compatible HW.
Bitmap:
0: MSM8996 V3, speedbin 0
1: MSM8996 V3, speedbin 1
2: MSM8996 V3, speedbin 2
3: unused
4: MSM8996 SG, speedbin 0
5: MSM8996 SG, speedbin 1
6: MSM8996 SG, speedbin 2
7-31: unused
maximum: 0x77
clock-latency-ns: true
required-opps: true
required:
- opp-hz
required:
- compatible
if:
required:
- nvmem-cells
then:
patternProperties:
'^opp-?[0-9]+$':
required:
- opp-supported-hw
additionalProperties: false
examples:
- |
/ {
model = "Qualcomm Technologies, Inc. DB820c";
compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc", "qcom,apq8096";
#address-cells = <2>;
#size-cells = <2>;
cpus {
#address-cells = <2>;
#size-cells = <0>;
CPU0: cpu@0 {
device_type = "cpu";
compatible = "qcom,kryo";
reg = <0x0 0x0>;
enable-method = "psci";
cpu-idle-states = <&CPU_SLEEP_0>;
capacity-dmips-mhz = <1024>;
clocks = <&kryocc 0>;
operating-points-v2 = <&cluster0_opp>;
#cooling-cells = <2>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
compatible = "cache";
cache-level = <2>;
};
};
CPU1: cpu@1 {
device_type = "cpu";
compatible = "qcom,kryo";
reg = <0x0 0x1>;
enable-method = "psci";
cpu-idle-states = <&CPU_SLEEP_0>;
capacity-dmips-mhz = <1024>;
clocks = <&kryocc 0>;
operating-points-v2 = <&cluster0_opp>;
#cooling-cells = <2>;
next-level-cache = <&L2_0>;
};
CPU2: cpu@100 {
device_type = "cpu";
compatible = "qcom,kryo";
reg = <0x0 0x100>;
enable-method = "psci";
cpu-idle-states = <&CPU_SLEEP_0>;
capacity-dmips-mhz = <1024>;
clocks = <&kryocc 1>;
operating-points-v2 = <&cluster1_opp>;
#cooling-cells = <2>;
next-level-cache = <&L2_1>;
L2_1: l2-cache {
compatible = "cache";
cache-level = <2>;
};
};
CPU3: cpu@101 {
device_type = "cpu";
compatible = "qcom,kryo";
reg = <0x0 0x101>;
enable-method = "psci";
cpu-idle-states = <&CPU_SLEEP_0>;
capacity-dmips-mhz = <1024>;
clocks = <&kryocc 1>;
operating-points-v2 = <&cluster1_opp>;
#cooling-cells = <2>;
next-level-cache = <&L2_1>;
};
cpu-map {
cluster0 {
core0 {
cpu = <&CPU0>;
};
core1 {
cpu = <&CPU1>;
};
};
cluster1 {
core0 {
cpu = <&CPU2>;
};
core1 {
cpu = <&CPU3>;
};
};
};
};
cluster0_opp: opp-table-0 {
compatible = "operating-points-v2-kryo-cpu";
nvmem-cells = <&speedbin_efuse>;
opp-shared;
opp-307200000 {
opp-hz = /bits/ 64 <307200000>;
opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x77>;
clock-latency-ns = <200000>;
};
opp-1593600000 {
opp-hz = /bits/ 64 <1593600000>;
opp-microvolt = <1140000 905000 1140000>;
opp-supported-hw = <0x71>;
clock-latency-ns = <200000>;
};
opp-2188800000 {
opp-hz = /bits/ 64 <2188800000>;
opp-microvolt = <1140000 905000 1140000>;
opp-supported-hw = <0x10>;
clock-latency-ns = <200000>;
};
};
cluster1_opp: opp-table-1 {
compatible = "operating-points-v2-kryo-cpu";
nvmem-cells = <&speedbin_efuse>;
opp-shared;
opp-307200000 {
opp-hz = /bits/ 64 <307200000>;
opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x77>;
clock-latency-ns = <200000>;
};
opp-1593600000 {
opp-hz = /bits/ 64 <1593600000>;
opp-microvolt = <1140000 905000 1140000>;
opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-2150400000 {
opp-hz = /bits/ 64 <2150400000>;
opp-microvolt = <1140000 905000 1140000>;
opp-supported-hw = <0x31>;
clock-latency-ns = <200000>;
};
opp-2342400000 {
opp-hz = /bits/ 64 <2342400000>;
opp-microvolt = <1140000 905000 1140000>;
opp-supported-hw = <0x10>;
clock-latency-ns = <200000>;
};
};
smem {
compatible = "qcom,smem";
memory-region = <&smem_mem>;
hwlocks = <&tcsr_mutex 3>;
};
soc {
#address-cells = <1>;
#size-cells = <1>;
qfprom: qfprom@74000 {
compatible = "qcom,msm8996-qfprom", "qcom,qfprom";
reg = <0x00074000 0x8ff>;
#address-cells = <1>;
#size-cells = <1>;
speedbin_efuse: speedbin@133 {
reg = <0x133 0x1>;
bits = <5 3>;
};
};
};
};
|
