blob: 19fce774cafad1773cf4acc499ae1fff072d4c28 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
|
STMicroelectronics PWM driver bindings
--------------------------------------
Required parameters:
- compatible : "st,pwm"
- #pwm-cells : Number of cells used to specify a PWM. First cell
specifies the per-chip index of the PWM to use and the
second cell is the period in nanoseconds - fixed to 2
for STiH41x.
- reg : Physical base address and length of the controller's
registers.
- pinctrl-names: Set to "default".
- pinctrl-0: List of phandles pointing to pin configuration nodes
for PWM module.
For Pinctrl properties, please refer to [1].
- clock-names: Valid entries are "pwm" and/or "capture".
- clocks: phandle of the clock used by the PWM module.
For Clk properties, please refer to [2].
- interrupts: IRQ for the Capture device
Optional properties:
- st,pwm-num-chan: Number of available PWM channels. Default is 0.
- st,capture-num-chan: Number of available Capture channels. Default is 0.
[1] Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
[2] Documentation/devicetree/bindings/clock/clock-bindings.txt
Example:
pwm1: pwm@fe510000 {
compatible = "st,pwm";
reg = <0xfe510000 0x68>;
#pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1_chan0_default
&pinctrl_pwm1_chan1_default
&pinctrl_pwm1_chan2_default
&pinctrl_pwm1_chan3_default>;
clocks = <&clk_sysin>;
clock-names = "pwm";
st,pwm-num-chan = <4>;
st,capture-num-chan = <2>;
};
|
