aboutsummaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/usb/dwc2.yaml
blob: f00867ebc147ec2fd238fa7742025096a533bf1b (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/usb/dwc2.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: DesignWare HS OTG USB 2.0 controller Bindings

maintainers:
  - Rob Herring <robh@kernel.org>

allOf:
  - $ref: usb-drd.yaml#

properties:
  compatible:
    oneOf:
      - const: brcm,bcm2835-usb
      - const: hisilicon,hi6220-usb
      - items:
          - const: rockchip,rk3066-usb
          - const: snps,dwc2
      - items:
          - enum:
              - rockchip,px30-usb
              - rockchip,rk3036-usb
              - rockchip,rk3188-usb
              - rockchip,rk3228-usb
              - rockchip,rk3288-usb
              - rockchip,rk3308-usb
              - rockchip,rk3328-usb
              - rockchip,rk3368-usb
              - rockchip,rv1108-usb
          - const: rockchip,rk3066-usb
          - const: snps,dwc2
      - const: lantiq,arx100-usb
      - const: lantiq,xrx200-usb
      - items:
          - enum:
              - amlogic,meson8-usb
              - amlogic,meson8b-usb
              - amlogic,meson-gxbb-usb
              - amlogic,meson-g12a-usb
          - const: snps,dwc2
      - const: amcc,dwc-otg
      - const: apm,apm82181-dwc-otg
      - const: snps,dwc2
      - const: st,stm32f4x9-fsotg
      - const: st,stm32f4x9-hsotg
      - const: st,stm32f7-hsotg
      - const: st,stm32mp15-fsotg
      - items:
          - const: st,stm32mp15-hsotg
          - const: snps,dwc2
      - const: samsung,s3c6400-hsotg

  reg:
    maxItems: 1

  interrupts:
    maxItems: 1

  clocks:
    maxItems: 1

  clock-names:
    items:
      - const: otg

  resets:
    items:
      - description: common reset
      - description: ecc reset
    minItems: 1

  reset-names:
    items:
      - const: dwc2
      - const: dwc2-ecc
    minItems: 1

  phys:
    maxItems: 1

  phy-names:
    const: usb2-phy

  power-domains:
    maxItems: 1

  vbus-supply:
    description: reference to the VBUS regulator. Depending on the current mode
      this is enabled (in "host" mode") or disabled (in "peripheral" mode). The
      regulator is updated if the controller is configured in "otg" mode and the
      status changes between "host" and "peripheral".

  vusb_d-supply:
    description: phandle to voltage regulator of digital section,

  vusb_a-supply:
    description: phandle to voltage regulator of analog section.

  usb33d-supply:
    description: reference to the VBUS and ID sensing comparators supply, in
      order to perform OTG operation, used on STM32MP15 SoCs.

  dr_mode: true

  otg-rev: true

  hnp-disable: true

  srp-disable: true

  usb-role-switch: true

  role-switch-default-mode: true

  g-rx-fifo-size:
    $ref: /schemas/types.yaml#/definitions/uint32
    description: size of rx fifo size in gadget mode.

  g-np-tx-fifo-size:
    $ref: /schemas/types.yaml#/definitions/uint32
    description: size of non-periodic tx fifo size in gadget mode.

  g-tx-fifo-size:
    $ref: /schemas/types.yaml#/definitions/uint32-array
    description: size of periodic tx fifo per endpoint (except ep0) in gadget mode.

  snps,need-phy-for-wake:
    $ref: /schemas/types.yaml#/definitions/flag
    description: If present indicates that the phy needs to be left on for 
      remote wakeup during suspend.

  snps,reset-phy-on-wake:
    $ref: /schemas/types.yaml#/definitions/flag
    description: If present indicates that we need to reset the PHY when we 
      detect a wakeup. This is due to a hardware errata.

  port:
    description:
      Any connector to the data bus of this controller should be modelled
      using the OF graph bindings specified, if the "usb-role-switch"
      property is used.
    $ref: /schemas/graph.yaml#/properties/port

dependencies:
  port: [ usb-role-switch ]
  role-switch-default-mode: [ usb-role-switch ]

required:
  - compatible
  - reg
  - interrupts
  - clocks
  - clock-names

additionalProperties: false

examples:
  - |
      usb@101c0000 {
        compatible = "rockchip,rk3066-usb", "snps,dwc2";
        reg = <0x10180000 0x40000>;
        interrupts = <18>;
        clocks = <&usb_otg_ahb_clk>;
        clock-names = "otg";
        phys = <&usbphy>;
        phy-names = "usb2-phy";
      };

...