aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/am335x-moxa-uc-2101.dts
blob: 48aee6de4cdbfe5242f05f807246c21412c9ba20 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
// SPDX-License-Identifier: GPL-2.0
/*
 * Copyright (C) 2018 MOXA Inc. - https://www.moxa.com/
 *
 * Authors: SZ Lin (林上智) <sz.lin@moxa.com>
 *          Wes Huang (黃淵河) <wes.huang@moxa.com>
 *          Fero JD Zhou (周俊達) <FeroJD.Zhou@moxa.com>
 */

/dts-v1/;

#include "am335x-moxa-uc-2100-common.dtsi"

/ {
	model = "Moxa UC-2101";
	compatible = "moxa,uc-2101", "ti,am33xx";

	leds {
		compatible = "gpio-leds";
		led1 {
			label = "UC2100:GREEN:USER";
			gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
			default-state = "off";
		};
	};
};

&am33xx_pinmux {
	pinctrl-names = "default";

	cpsw_default: cpsw_default {
		pinctrl-single,pins = <
			/* Slave 1 */
			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_crs.rmii1_crs_dv */
			AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txen.rmii1_txen */
			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd1.rmii1_txd1 */
			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd0.rmii1_txd0 */
			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
			AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mii1_refclk.rmii1_refclk */
		>;
	};

	spi1_pins: pinmux_spi1 {
		pinctrl-single,pins = <
			AM33XX_IOPAD(0x964, PIN_INPUT_PULLUP | MUX_MODE4)	 /* ecap0_in_pwm0_out.spi1_sclk */
			AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE4)	 /* uart1_ctsn.spi1_cs0 */
			AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE4)	 /* uart0_ctsn.spi1_d0 */
			AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE4)	 /* uart0_rtsn.spi1_d1 */
		>;
	};
};

&davinci_mdio {
	phy0: ethernet-phy@4 {
		reg = <4>;
	};
};

&cpsw_emac0 {
	status = "okay";
	phy-handle = <&phy0>;
	phy-mode = "rmii";
};

&cpsw_emac1 {
	status = "disabled";
};