1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
|
/*
* arch/arm/mach-spear3xx/spear300.c
*
* SPEAr300 machine source file
*
* Copyright (C) 2009-2012 ST Microelectronics
* Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#define pr_fmt(fmt) "SPEAr300: " fmt
#include <linux/amba/pl08x.h>
#include <linux/of_platform.h>
#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <plat/shirq.h>
#include <mach/generic.h>
#include <mach/spear.h>
/* Base address of various IPs */
#define SPEAR300_TELECOM_BASE UL(0x50000000)
/* Interrupt registers offsets and masks */
#define SPEAR300_INT_ENB_MASK_REG 0x54
#define SPEAR300_INT_STS_MASK_REG 0x58
#define SPEAR300_IT_PERS_S_IRQ_MASK (1 << 0)
#define SPEAR300_IT_CHANGE_S_IRQ_MASK (1 << 1)
#define SPEAR300_I2S_IRQ_MASK (1 << 2)
#define SPEAR300_TDM_IRQ_MASK (1 << 3)
#define SPEAR300_CAMERA_L_IRQ_MASK (1 << 4)
#define SPEAR300_CAMERA_F_IRQ_MASK (1 << 5)
#define SPEAR300_CAMERA_V_IRQ_MASK (1 << 6)
#define SPEAR300_KEYBOARD_IRQ_MASK (1 << 7)
#define SPEAR300_GPIO1_IRQ_MASK (1 << 8)
#define SPEAR300_SHIRQ_RAS1_MASK 0x1FF
#define SPEAR300_SOC_CONFIG_BASE UL(0x99000000)
/* SPEAr300 Virtual irq definitions */
/* IRQs sharing IRQ_GEN_RAS_1 */
#define SPEAR300_VIRQ_IT_PERS_S (SPEAR3XX_VIRQ_START + 0)
#define SPEAR300_VIRQ_IT_CHANGE_S (SPEAR3XX_VIRQ_START + 1)
#define SPEAR300_VIRQ_I2S (SPEAR3XX_VIRQ_START + 2)
#define SPEAR300_VIRQ_TDM (SPEAR3XX_VIRQ_START + 3)
#define SPEAR300_VIRQ_CAMERA_L (SPEAR3XX_VIRQ_START + 4)
#define SPEAR300_VIRQ_CAMERA_F (SPEAR3XX_VIRQ_START + 5)
#define SPEAR300_VIRQ_CAMERA_V (SPEAR3XX_VIRQ_START + 6)
#define SPEAR300_VIRQ_KEYBOARD (SPEAR3XX_VIRQ_START + 7)
#define SPEAR300_VIRQ_GPIO1 (SPEAR3XX_VIRQ_START + 8)
/* IRQs sharing IRQ_GEN_RAS_3 */
#define SPEAR300_IRQ_CLCD SPEAR3XX_IRQ_GEN_RAS_3
/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
#define SPEAR300_IRQ_SDHCI SPEAR3XX_IRQ_INTRCOMM_RAS_ARM
/* spear3xx shared irq */
static struct shirq_dev_config shirq_ras1_config[] = {
{
.virq = SPEAR300_VIRQ_IT_PERS_S,
.enb_mask = SPEAR300_IT_PERS_S_IRQ_MASK,
.status_mask = SPEAR300_IT_PERS_S_IRQ_MASK,
}, {
.virq = SPEAR300_VIRQ_IT_CHANGE_S,
.enb_mask = SPEAR300_IT_CHANGE_S_IRQ_MASK,
.status_mask = SPEAR300_IT_CHANGE_S_IRQ_MASK,
}, {
.virq = SPEAR300_VIRQ_I2S,
.enb_mask = SPEAR300_I2S_IRQ_MASK,
.status_mask = SPEAR300_I2S_IRQ_MASK,
}, {
.virq = SPEAR300_VIRQ_TDM,
.enb_mask = SPEAR300_TDM_IRQ_MASK,
.status_mask = SPEAR300_TDM_IRQ_MASK,
}, {
.virq = SPEAR300_VIRQ_CAMERA_L,
.enb_mask = SPEAR300_CAMERA_L_IRQ_MASK,
.status_mask = SPEAR300_CAMERA_L_IRQ_MASK,
}, {
.virq = SPEAR300_VIRQ_CAMERA_F,
.enb_mask = SPEAR300_CAMERA_F_IRQ_MASK,
.status_mask = SPEAR300_CAMERA_F_IRQ_MASK,
}, {
.virq = SPEAR300_VIRQ_CAMERA_V,
.enb_mask = SPEAR300_CAMERA_V_IRQ_MASK,
.status_mask = SPEAR300_CAMERA_V_IRQ_MASK,
}, {
.virq = SPEAR300_VIRQ_KEYBOARD,
.enb_mask = SPEAR300_KEYBOARD_IRQ_MASK,
.status_mask = SPEAR300_KEYBOARD_IRQ_MASK,
}, {
.virq = SPEAR300_VIRQ_GPIO1,
.enb_mask = SPEAR300_GPIO1_IRQ_MASK,
.status_mask = SPEAR300_GPIO1_IRQ_MASK,
},
};
static struct spear_shirq shirq_ras1 = {
.irq = SPEAR3XX_IRQ_GEN_RAS_1,
.dev_config = shirq_ras1_config,
.dev_count = ARRAY_SIZE(shirq_ras1_config),
.regs = {
.enb_reg = SPEAR300_INT_ENB_MASK_REG,
.status_reg = SPEAR300_INT_STS_MASK_REG,
.status_reg_mask = SPEAR300_SHIRQ_RAS1_MASK,
.clear_reg = -1,
},
};
/* DMAC platform data's slave info */
struct pl08x_channel_data spear300_dma_info[] = {
{
.bus_id = "uart0_rx",
.min_signal = 2,
.max_signal = 2,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart0_tx",
.min_signal = 3,
.max_signal = 3,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ssp0_rx",
.min_signal = 8,
.max_signal = 8,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ssp0_tx",
.min_signal = 9,
.max_signal = 9,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "i2c_rx",
.min_signal = 10,
.max_signal = 10,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "i2c_tx",
.min_signal = 11,
.max_signal = 11,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "irda",
.min_signal = 12,
.max_signal = 12,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "adc",
.min_signal = 13,
.max_signal = 13,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "to_jpeg",
.min_signal = 14,
.max_signal = 14,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "from_jpeg",
.min_signal = 15,
.max_signal = 15,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras0_rx",
.min_signal = 0,
.max_signal = 0,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras0_tx",
.min_signal = 1,
.max_signal = 1,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras1_rx",
.min_signal = 2,
.max_signal = 2,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras1_tx",
.min_signal = 3,
.max_signal = 3,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras2_rx",
.min_signal = 4,
.max_signal = 4,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras2_tx",
.min_signal = 5,
.max_signal = 5,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras3_rx",
.min_signal = 6,
.max_signal = 6,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras3_tx",
.min_signal = 7,
.max_signal = 7,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras4_rx",
.min_signal = 8,
.max_signal = 8,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras4_tx",
.min_signal = 9,
.max_signal = 9,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras5_rx",
.min_signal = 10,
.max_signal = 10,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras5_tx",
.min_signal = 11,
.max_signal = 11,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras6_rx",
.min_signal = 12,
.max_signal = 12,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras6_tx",
.min_signal = 13,
.max_signal = 13,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras7_rx",
.min_signal = 14,
.max_signal = 14,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras7_tx",
.min_signal = 15,
.max_signal = 15,
.muxval = 1,
.periph_buses = PL08X_AHB1,
},
};
/* Add SPEAr300 auxdata to pass platform data */
static struct of_dev_auxdata spear300_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
&pl022_plat_data),
OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL,
&pl080_plat_data),
{}
};
static void __init spear300_dt_init(void)
{
int ret;
pl080_plat_data.slave_channels = spear300_dma_info;
pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear300_dma_info);
of_platform_populate(NULL, of_default_bus_match_table,
spear300_auxdata_lookup, NULL);
/* shared irq registration */
shirq_ras1.regs.base = ioremap(SPEAR300_TELECOM_BASE, SZ_4K);
if (shirq_ras1.regs.base) {
ret = spear_shirq_register(&shirq_ras1);
if (ret)
pr_err("Error registering Shared IRQ\n");
}
}
static const char * const spear300_dt_board_compat[] = {
"st,spear300",
"st,spear300-evb",
NULL,
};
static void __init spear300_map_io(void)
{
spear3xx_map_io();
}
DT_MACHINE_START(SPEAR300_DT, "ST SPEAr300 SoC with Flattened Device Tree")
.map_io = spear300_map_io,
.init_irq = spear3xx_dt_init_irq,
.handle_irq = vic_handle_irq,
.timer = &spear3xx_timer,
.init_machine = spear300_dt_init,
.restart = spear_restart,
.dt_compat = spear300_dt_board_compat,
MACHINE_END
|
