1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
|
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2016 Marvell Technology Group Ltd.
*
* Device Tree file for Marvell Armada AP806.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
/dts-v1/;
/ {
model = "Marvell Armada AP806";
compatible = "marvell,armada-ap806";
#address-cells = <2>;
#size-cells = <2>;
aliases {
serial0 = &uart0;
serial1 = &uart1;
gpio0 = &ap_gpio;
spi0 = &spi0;
};
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
/*
* This area matches the mapping done with a
* mainline U-Boot, and should be updated by the
* bootloader.
*/
psci-area@4000000 {
reg = <0x0 0x4000000 0x0 0x200000>;
no-map;
};
};
ap806 {
#address-cells = <2>;
#size-cells = <2>;
compatible = "simple-bus";
interrupt-parent = <&gic>;
ranges;
config-space@f0000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges = <0x0 0x0 0xf0000000 0x1000000>;
gic: interrupt-controller@210000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
interrupt-controller;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
reg = <0x210000 0x10000>,
<0x220000 0x20000>,
<0x240000 0x20000>,
<0x260000 0x20000>;
gic_v2m0: v2m@280000 {
compatible = "arm,gic-v2m-frame";
msi-controller;
reg = <0x280000 0x1000>;
arm,msi-base-spi = <160>;
arm,msi-num-spis = <32>;
};
gic_v2m1: v2m@290000 {
compatible = "arm,gic-v2m-frame";
msi-controller;
reg = <0x290000 0x1000>;
arm,msi-base-spi = <192>;
arm,msi-num-spis = <32>;
};
gic_v2m2: v2m@2a0000 {
compatible = "arm,gic-v2m-frame";
msi-controller;
reg = <0x2a0000 0x1000>;
arm,msi-base-spi = <224>;
arm,msi-num-spis = <32>;
};
gic_v2m3: v2m@2b0000 {
compatible = "arm,gic-v2m-frame";
msi-controller;
reg = <0x2b0000 0x1000>;
arm,msi-base-spi = <256>;
arm,msi-num-spis = <32>;
};
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
pmu {
compatible = "arm,cortex-a72-pmu";
interrupt-parent = <&pic>;
interrupts = <17>;
};
odmi: odmi@300000 {
compatible = "marvell,odmi-controller";
interrupt-controller;
msi-controller;
marvell,odmi-frames = <4>;
reg = <0x300000 0x4000>,
<0x304000 0x4000>,
<0x308000 0x4000>,
<0x30C000 0x4000>;
marvell,spi-base = <128>, <136>, <144>, <152>;
};
gicp: gicp@3f0040 {
compatible = "marvell,ap806-gicp";
reg = <0x3f0040 0x10>;
marvell,spi-ranges = <64 64>, <288 64>;
msi-controller;
};
pic: interrupt-controller@3f0100 {
compatible = "marvell,armada-8k-pic";
reg = <0x3f0100 0x10>;
#interrupt-cells = <1>;
interrupt-controller;
interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
};
sei: interrupt-controller@3f0200 {
compatible = "marvell,ap806-sei";
reg = <0x3f0200 0x40>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <1>;
interrupt-controller;
msi-controller;
};
xor@400000 {
compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
reg = <0x400000 0x1000>,
<0x410000 0x1000>;
msi-parent = <&gic_v2m0>;
clocks = <&ap_clk 3>;
dma-coherent;
};
xor@420000 {
compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
reg = <0x420000 0x1000>,
<0x430000 0x1000>;
msi-parent = <&gic_v2m0>;
clocks = <&ap_clk 3>;
dma-coherent;
};
xor@440000 {
compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
reg = <0x440000 0x1000>,
<0x450000 0x1000>;
msi-parent = <&gic_v2m0>;
clocks = <&ap_clk 3>;
dma-coherent;
};
xor@460000 {
compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
reg = <0x460000 0x1000>,
<0x470000 0x1000>;
msi-parent = <&gic_v2m0>;
clocks = <&ap_clk 3>;
dma-coherent;
};
spi0: spi@510600 {
compatible = "marvell,armada-380-spi";
reg = <0x510600 0x50>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ap_clk 3>;
status = "disabled";
};
i2c0: i2c@511000 {
compatible = "marvell,mv78230-i2c";
reg = <0x511000 0x20>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
timeout-ms = <1000>;
clocks = <&ap_clk 3>;
status = "disabled";
};
uart0: serial@512000 {
compatible = "snps,dw-apb-uart";
reg = <0x512000 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
clocks = <&ap_clk 3>;
status = "disabled";
};
uart1: serial@512100 {
compatible = "snps,dw-apb-uart";
reg = <0x512100 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
clocks = <&ap_clk 3>;
status = "disabled";
};
watchdog: watchdog@610000 {
compatible = "arm,sbsa-gwdt";
reg = <0x610000 0x1000>, <0x600000 0x1000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
};
ap_sdhci0: sdhci@6e0000 {
compatible = "marvell,armada-ap806-sdhci";
reg = <0x6e0000 0x300>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core";
clocks = <&ap_clk 4>;
dma-coherent;
marvell,xenon-phy-slow-mode;
status = "disabled";
};
ap_syscon: system-controller@6f4000 {
compatible = "syscon", "simple-mfd";
reg = <0x6f4000 0x2000>;
ap_clk: clock {
compatible = "marvell,ap806-clock";
#clock-cells = <1>;
};
ap_pinctrl: pinctrl {
compatible = "marvell,ap806-pinctrl";
uart0_pins: uart0-pins {
marvell,pins = "mpp11", "mpp19";
marvell,function = "uart0";
};
};
ap_gpio: gpio@1040 {
compatible = "marvell,armada-8k-gpio";
offset = <0x1040>;
ngpios = <20>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&ap_pinctrl 0 0 20>;
};
};
ap_syscon1: system-controller@6f8000 {
compatible = "syscon", "simple-mfd";
reg = <0x6f8000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
cpu_clk: clock-cpu@278 {
compatible = "marvell,ap806-cpu-clock";
clocks = <&ap_clk 0>, <&ap_clk 1>;
#clock-cells = <1>;
reg = <0x278 0xa30>;
};
ap_thermal: thermal-sensor@80 {
compatible = "marvell,armada-ap806-thermal";
reg = <0x80 0x10>;
interrupt-parent = <&sei>;
interrupts = <18>;
#thermal-sensor-cells = <1>;
};
};
};
};
/*
* The thermal IP features one internal sensor plus, if applicable, one
* remote channel wired to one sensor per CPU.
*
* Only one thermal zone per AP/CP may trigger interrupts at a time, the
* first one that will have a critical trip point will be chosen.
*/
thermal-zones {
ap_thermal_ic: ap-thermal-ic {
polling-delay-passive = <0>; /* Interrupt driven */
polling-delay = <0>; /* Interrupt driven */
thermal-sensors = <&ap_thermal 0>;
trips {
ap_crit: ap-crit {
temperature = <100000>; /* mC degrees */
hysteresis = <2000>; /* mC degrees */
type = "critical";
};
};
cooling-maps { };
};
ap_thermal_cpu0: ap-thermal-cpu0 {
polling-delay-passive = <1000>;
polling-delay = <1000>;
thermal-sensors = <&ap_thermal 1>;
trips {
cpu0_hot: cpu0-hot {
temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
cpu0_emerg: cpu0-emerg {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
};
cooling-maps {
map0_hot: map0-hot {
trip = <&cpu0_hot>;
cooling-device = <&cpu0 1 2>,
<&cpu1 1 2>;
};
map0_emerg: map0-ermerg {
trip = <&cpu0_emerg>;
cooling-device = <&cpu0 3 3>,
<&cpu1 3 3>;
};
};
};
ap_thermal_cpu1: ap-thermal-cpu1 {
polling-delay-passive = <1000>;
polling-delay = <1000>;
thermal-sensors = <&ap_thermal 2>;
trips {
cpu1_hot: cpu1-hot {
temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
cpu1_emerg: cpu1-emerg {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
};
cooling-maps {
map1_hot: map1-hot {
trip = <&cpu1_hot>;
cooling-device = <&cpu0 1 2>,
<&cpu1 1 2>;
};
map1_emerg: map1-emerg {
trip = <&cpu1_emerg>;
cooling-device = <&cpu0 3 3>,
<&cpu1 3 3>;
};
};
};
ap_thermal_cpu2: ap-thermal-cpu2 {
polling-delay-passive = <1000>;
polling-delay = <1000>;
thermal-sensors = <&ap_thermal 3>;
trips {
cpu2_hot: cpu2-hot {
temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
cpu2_emerg: cpu2-emerg {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
};
cooling-maps {
map2_hot: map2-hot {
trip = <&cpu2_hot>;
cooling-device = <&cpu2 1 2>,
<&cpu3 1 2>;
};
map2_emerg: map2-emerg {
trip = <&cpu2_emerg>;
cooling-device = <&cpu2 3 3>,
<&cpu3 3 3>;
};
};
};
ap_thermal_cpu3: ap-thermal-cpu3 {
polling-delay-passive = <1000>;
polling-delay = <1000>;
thermal-sensors = <&ap_thermal 4>;
trips {
cpu3_hot: cpu3-hot {
temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
cpu3_emerg: cpu3-emerg {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
};
cooling-maps {
map3_hot: map3-bhot {
trip = <&cpu3_hot>;
cooling-device = <&cpu2 1 2>,
<&cpu3 1 2>;
};
map3_emerg: map3-emerg {
trip = <&cpu3_emerg>;
cooling-device = <&cpu2 3 3>,
<&cpu3 3 3>;
};
};
};
};
};
|
