1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
|
/*
* spi_eeprom.c
* Copyright (C) 2000-2001 Toshiba Corporation
*
* 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
* terms of the GNU General Public License version 2. This program is
* licensed "as is" without any warranty of any kind, whether express
* or implied.
*
* Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
*/
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/export.h>
#include <linux/device.h>
#include <linux/spi/spi.h>
#include <linux/spi/eeprom.h>
#include <asm/txx9/spi.h>
#define AT250X0_PAGE_SIZE 8
/* register board information for at25 driver */
int __init spi_eeprom_register(int busid, int chipid, int size)
{
struct spi_board_info info = {
.modalias = "at25",
.max_speed_hz = 1500000, /* 1.5Mbps */
.bus_num = busid,
.chip_select = chipid,
/* Mode 0: High-Active, Sample-Then-Shift */
};
struct spi_eeprom *eeprom;
eeprom = kzalloc(sizeof(*eeprom), GFP_KERNEL);
if (!eeprom)
return -ENOMEM;
strcpy(eeprom->name, "at250x0");
eeprom->byte_len = size;
eeprom->page_size = AT250X0_PAGE_SIZE;
eeprom->flags = EE_ADDR1;
info.platform_data = eeprom;
return spi_register_board_info(&info, 1);
}
/* simple temporary spi driver to provide early access to seeprom. */
static struct read_param {
int busid;
int chipid;
int address;
unsigned char *buf;
int len;
} *read_param;
static int __init early_seeprom_probe(struct spi_device *spi)
{
int stat = 0;
u8 cmd[2];
int len = read_param->len;
char *buf = read_param->buf;
int address = read_param->address;
dev_info(&spi->dev, "spiclk %u KHz.\n",
(spi->max_speed_hz + 500) / 1000);
if (read_param->busid != spi->master->bus_num ||
read_param->chipid != spi->chip_select)
return -ENODEV;
while (len > 0) {
/* spi_write_then_read can only work with small chunk */
int c = len < AT250X0_PAGE_SIZE ? len : AT250X0_PAGE_SIZE;
cmd[0] = 0x03; /* AT25_READ */
cmd[1] = address;
stat = spi_write_then_read(spi, cmd, sizeof(cmd), buf, c);
buf += c;
len -= c;
address += c;
}
return stat;
}
static struct spi_driver early_seeprom_driver __initdata = {
.driver = {
.name = "at25",
.owner = THIS_MODULE,
},
.probe = early_seeprom_probe,
};
int __init spi_eeprom_read(int busid, int chipid, int address,
unsigned char *buf, int len)
{
int ret;
struct read_param param = {
.busid = busid,
.chipid = chipid,
.address = address,
.buf = buf,
.len = len
};
read_param = ¶m;
ret = spi_register_driver(&early_seeprom_driver);
if (!ret)
spi_unregister_driver(&early_seeprom_driver);
return ret;
}
|
