1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
|
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* DaVinci DM816 AHCI SATA platform driver
*
* Copyright (C) 2017 BayLibre SAS
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/pm.h>
#include <linux/platform_device.h>
#include <linux/libata.h>
#include <linux/ahci_platform.h>
#include "ahci.h"
#define AHCI_DM816_DRV_NAME "ahci-dm816"
#define AHCI_DM816_PHY_ENPLL(x) ((x) << 0)
#define AHCI_DM816_PHY_MPY(x) ((x) << 1)
#define AHCI_DM816_PHY_LOS(x) ((x) << 12)
#define AHCI_DM816_PHY_RXCDR(x) ((x) << 13)
#define AHCI_DM816_PHY_RXEQ(x) ((x) << 16)
#define AHCI_DM816_PHY_TXSWING(x) ((x) << 23)
#define AHCI_DM816_P0PHYCR_REG 0x178
#define AHCI_DM816_P1PHYCR_REG 0x1f8
#define AHCI_DM816_PLL_OUT 1500000000LU
static const unsigned long pll_mpy_table[] = {
400, 500, 600, 800, 825, 1000, 1200,
1250, 1500, 1600, 1650, 2000, 2200, 2500
};
static int ahci_dm816_get_mpy_bits(unsigned long refclk_rate)
{
unsigned long pll_multiplier;
int i;
/*
* We need to determine the value of the multiplier (MPY) bits.
* In order to include the 8.25 multiplier we need to first divide
* the refclk rate by 100.
*/
pll_multiplier = AHCI_DM816_PLL_OUT / (refclk_rate / 100);
for (i = 0; i < ARRAY_SIZE(pll_mpy_table); i++) {
if (pll_mpy_table[i] == pll_multiplier)
return i;
}
/*
* We should have divided evenly - if not, return an invalid
* value.
*/
return -1;
}
static int ahci_dm816_phy_init(struct ahci_host_priv *hpriv, struct device *dev)
{
unsigned long refclk_rate;
int mpy;
u32 val;
/*
* We should have been supplied two clocks: the functional and
* keep-alive clock and the external reference clock. We need the
* rate of the latter to calculate the correct value of MPY bits.
*/
if (!hpriv->clks[1]) {
dev_err(dev, "reference clock not supplied\n");
return -EINVAL;
}
refclk_rate = clk_get_rate(hpriv->clks[1]);
if ((refclk_rate % 100) != 0) {
dev_err(dev, "reference clock rate must be divisible by 100\n");
return -EINVAL;
}
mpy = ahci_dm816_get_mpy_bits(refclk_rate);
if (mpy < 0) {
dev_err(dev, "can't calculate the MPY bits value\n");
return -EINVAL;
}
/* Enable the PHY and configure the first HBA port. */
val = AHCI_DM816_PHY_MPY(mpy) | AHCI_DM816_PHY_LOS(1) |
AHCI_DM816_PHY_RXCDR(4) | AHCI_DM816_PHY_RXEQ(1) |
AHCI_DM816_PHY_TXSWING(3) | AHCI_DM816_PHY_ENPLL(1);
writel(val, hpriv->mmio + AHCI_DM816_P0PHYCR_REG);
/* Configure the second HBA port. */
val = AHCI_DM816_PHY_LOS(1) | AHCI_DM816_PHY_RXCDR(4) |
AHCI_DM816_PHY_RXEQ(1) | AHCI_DM816_PHY_TXSWING(3);
writel(val, hpriv->mmio + AHCI_DM816_P1PHYCR_REG);
return 0;
}
static int ahci_dm816_softreset(struct ata_link *link,
unsigned int *class, unsigned long deadline)
{
int pmp, ret;
pmp = sata_srst_pmp(link);
/*
* There's an issue with the SATA controller on DM816 SoC: if we
* enable Port Multiplier support, but the drive is connected directly
* to the board, it can't be detected. As a workaround: if PMP is
* enabled, we first call ahci_do_softreset() and pass it the result of
* sata_srst_pmp(). If this call fails, we retry with pmp = 0.
*/
ret = ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready);
if (pmp && ret == -EBUSY)
return ahci_do_softreset(link, class, 0,
deadline, ahci_check_ready);
return ret;
}
static struct ata_port_operations ahci_dm816_port_ops = {
.inherits = &ahci_platform_ops,
.softreset = ahci_dm816_softreset,
};
static const struct ata_port_info ahci_dm816_port_info = {
.flags = AHCI_FLAG_COMMON,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_dm816_port_ops,
};
static struct scsi_host_template ahci_dm816_platform_sht = {
AHCI_SHT(AHCI_DM816_DRV_NAME),
};
static int ahci_dm816_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct ahci_host_priv *hpriv;
int rc;
hpriv = ahci_platform_get_resources(pdev, 0);
if (IS_ERR(hpriv))
return PTR_ERR(hpriv);
rc = ahci_platform_enable_resources(hpriv);
if (rc)
return rc;
rc = ahci_dm816_phy_init(hpriv, dev);
if (rc)
goto disable_resources;
rc = ahci_platform_init_host(pdev, hpriv,
&ahci_dm816_port_info,
&ahci_dm816_platform_sht);
if (rc)
goto disable_resources;
return 0;
disable_resources:
ahci_platform_disable_resources(hpriv);
return rc;
}
static SIMPLE_DEV_PM_OPS(ahci_dm816_pm_ops,
ahci_platform_suspend,
ahci_platform_resume);
static const struct of_device_id ahci_dm816_of_match[] = {
{ .compatible = "ti,dm816-ahci", },
{ },
};
MODULE_DEVICE_TABLE(of, ahci_dm816_of_match);
static struct platform_driver ahci_dm816_driver = {
.probe = ahci_dm816_probe,
.remove = ata_platform_remove_one,
.driver = {
.name = AHCI_DM816_DRV_NAME,
.of_match_table = ahci_dm816_of_match,
.pm = &ahci_dm816_pm_ops,
},
};
module_platform_driver(ahci_dm816_driver);
MODULE_DESCRIPTION("DaVinci DM816 AHCI SATA platform driver");
MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@baylibre.com>");
MODULE_LICENSE("GPL");
|
