1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
|
/*
* Copyright (C) 1996-1998 Linus Torvalds & authors (see below)
*/
/*
* Authors:
* Jaromir Koutek <miri@punknet.cz>,
* Jan Harkes <jaharkes@cwi.nl>,
* Mark Lord <mlord@pobox.com>
* Some parts of code are from ali14xx.c and from rz1000.c.
*/
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/ide.h>
#include <asm/io.h>
#define DRV_NAME "opti621"
#define READ_REG 0 /* index of Read cycle timing register */
#define WRITE_REG 1 /* index of Write cycle timing register */
#define CNTRL_REG 3 /* index of Control register */
#define STRAP_REG 5 /* index of Strap register */
#define MISC_REG 6 /* index of Miscellaneous register */
static int reg_base;
static DEFINE_SPINLOCK(opti621_lock);
/* Write value to register reg, base of register
* is at reg_base (0x1f0 primary, 0x170 secondary,
* if not changed by PCI configuration).
* This is from setupvic.exe program.
*/
static void write_reg(u8 value, int reg)
{
inw(reg_base + 1);
inw(reg_base + 1);
outb(3, reg_base + 2);
outb(value, reg_base + reg);
outb(0x83, reg_base + 2);
}
/* Read value from register reg, base of register
* is at reg_base (0x1f0 primary, 0x170 secondary,
* if not changed by PCI configuration).
* This is from setupvic.exe program.
*/
static u8 read_reg(int reg)
{
u8 ret = 0;
inw(reg_base + 1);
inw(reg_base + 1);
outb(3, reg_base + 2);
ret = inb(reg_base + reg);
outb(0x83, reg_base + 2);
return ret;
}
static void opti621_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
ide_drive_t *pair = ide_get_pair_dev(drive);
unsigned long flags;
unsigned long mode = drive->pio_mode, pair_mode;
const u8 pio = mode - XFER_PIO_0;
u8 tim, misc, addr_pio = pio, clk;
/* DRDY is default 2 (by OPTi Databook) */
static const u8 addr_timings[2][5] = {
{ 0x20, 0x10, 0x00, 0x00, 0x00 }, /* 33 MHz */
{ 0x10, 0x10, 0x00, 0x00, 0x00 }, /* 25 MHz */
};
static const u8 data_rec_timings[2][5] = {
{ 0x5b, 0x45, 0x32, 0x21, 0x20 }, /* 33 MHz */
{ 0x48, 0x34, 0x21, 0x10, 0x10 } /* 25 MHz */
};
ide_set_drivedata(drive, (void *)mode);
if (pair) {
pair_mode = (unsigned long)ide_get_drivedata(pair);
if (pair_mode && pair_mode < mode)
addr_pio = pair_mode - XFER_PIO_0;
}
spin_lock_irqsave(&opti621_lock, flags);
reg_base = hwif->io_ports.data_addr;
/* allow Register-B */
outb(0xc0, reg_base + CNTRL_REG);
/* hmm, setupvic.exe does this ;-) */
outb(0xff, reg_base + 5);
/* if reads 0xff, adapter not exist? */
(void)inb(reg_base + CNTRL_REG);
/* if reads 0xc0, no interface exist? */
read_reg(CNTRL_REG);
/* check CLK speed */
clk = read_reg(STRAP_REG) & 1;
printk(KERN_INFO "%s: CLK = %d MHz\n", hwif->name, clk ? 25 : 33);
tim = data_rec_timings[clk][pio];
misc = addr_timings[clk][addr_pio];
/* select Index-0/1 for Register-A/B */
write_reg(drive->dn & 1, MISC_REG);
/* set read cycle timings */
write_reg(tim, READ_REG);
/* set write cycle timings */
write_reg(tim, WRITE_REG);
/* use Register-A for drive 0 */
/* use Register-B for drive 1 */
write_reg(0x85, CNTRL_REG);
/* set address setup, DRDY timings, */
/* and read prefetch for both drives */
write_reg(misc, MISC_REG);
spin_unlock_irqrestore(&opti621_lock, flags);
}
static const struct ide_port_ops opti621_port_ops = {
.set_pio_mode = opti621_set_pio_mode,
};
static const struct ide_port_info opti621_chipset = {
.name = DRV_NAME,
.enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} },
.port_ops = &opti621_port_ops,
.host_flags = IDE_HFLAG_NO_DMA,
.pio_mask = ATA_PIO4,
};
static int opti621_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
return ide_pci_init_one(dev, &opti621_chipset, NULL);
}
static const struct pci_device_id opti621_pci_tbl[] = {
{ PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C621), 0 },
{ PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C825), 0 },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, opti621_pci_tbl);
static struct pci_driver opti621_pci_driver = {
.name = "Opti621_IDE",
.id_table = opti621_pci_tbl,
.probe = opti621_init_one,
.remove = ide_pci_remove,
.suspend = ide_pci_suspend,
.resume = ide_pci_resume,
};
static int __init opti621_ide_init(void)
{
return ide_pci_register_driver(&opti621_pci_driver);
}
static void __exit opti621_ide_exit(void)
{
pci_unregister_driver(&opti621_pci_driver);
}
module_init(opti621_ide_init);
module_exit(opti621_ide_exit);
MODULE_AUTHOR("Jaromir Koutek, Jan Harkes, Mark Lord");
MODULE_DESCRIPTION("PCI driver module for Opti621 IDE");
MODULE_LICENSE("GPL");
|
