1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
|
// SPDX-License-Identifier: GPL-2.0-only
/*
* Toshiba Visconti pulse-width-modulation controller driver
*
* Copyright (c) 2020 - 2021 TOSHIBA CORPORATION
* Copyright (c) 2020 - 2021 Toshiba Electronic Devices & Storage Corporation
*
* Authors: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
*
* Limitations:
* - The fixed input clock is running at 1 MHz and is divided by either 1,
* 2, 4 or 8.
* - When the settings of the PWM are modified, the new values are shadowed
* in hardware until the PIPGM_PCSR register is written and the currently
* running period is completed. This way the hardware switches atomically
* from the old setting to the new.
* - Disabling the hardware completes the currently running period and keeps
* the output at low level at all times.
*/
#include <linux/err.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/pwm.h>
#define PIPGM_PCSR(ch) (0x400 + 4 * (ch))
#define PIPGM_PDUT(ch) (0x420 + 4 * (ch))
#define PIPGM_PWMC(ch) (0x440 + 4 * (ch))
#define PIPGM_PWMC_PWMACT BIT(5)
#define PIPGM_PWMC_CLK_MASK GENMASK(1, 0)
#define PIPGM_PWMC_POLARITY_MASK GENMASK(5, 5)
struct visconti_pwm_chip {
struct pwm_chip chip;
void __iomem *base;
};
static inline struct visconti_pwm_chip *visconti_pwm_from_chip(struct pwm_chip *chip)
{
return container_of(chip, struct visconti_pwm_chip, chip);
}
static int visconti_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
const struct pwm_state *state)
{
struct visconti_pwm_chip *priv = visconti_pwm_from_chip(chip);
u32 period, duty_cycle, pwmc0;
if (!state->enabled) {
writel(0, priv->base + PIPGM_PCSR(pwm->hwpwm));
return 0;
}
/*
* The biggest period the hardware can provide is
* (0xffff << 3) * 1000 ns
* This value fits easily in an u32, so simplify the maths by
* capping the values to 32 bit integers.
*/
if (state->period > (0xffff << 3) * 1000)
period = (0xffff << 3) * 1000;
else
period = state->period;
if (state->duty_cycle > period)
duty_cycle = period;
else
duty_cycle = state->duty_cycle;
/*
* The input clock runs fixed at 1 MHz, so we have only
* microsecond resolution and so can divide by
* NSEC_PER_SEC / CLKFREQ = 1000 without losing precision.
*/
period /= 1000;
duty_cycle /= 1000;
if (!period)
return -ERANGE;
/*
* PWMC controls a divider that divides the input clk by a power of two
* between 1 and 8. As a smaller divider yields higher precision, pick
* the smallest possible one. As period is at most 0xffff << 3, pwmc0 is
* in the intended range [0..3].
*/
pwmc0 = fls(period >> 16);
if (WARN_ON(pwmc0 > 3))
return -EINVAL;
period >>= pwmc0;
duty_cycle >>= pwmc0;
if (state->polarity == PWM_POLARITY_INVERSED)
pwmc0 |= PIPGM_PWMC_PWMACT;
writel(pwmc0, priv->base + PIPGM_PWMC(pwm->hwpwm));
writel(duty_cycle, priv->base + PIPGM_PDUT(pwm->hwpwm));
writel(period, priv->base + PIPGM_PCSR(pwm->hwpwm));
return 0;
}
static void visconti_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
struct pwm_state *state)
{
struct visconti_pwm_chip *priv = visconti_pwm_from_chip(chip);
u32 period, duty, pwmc0, pwmc0_clk;
period = readl(priv->base + PIPGM_PCSR(pwm->hwpwm));
duty = readl(priv->base + PIPGM_PDUT(pwm->hwpwm));
pwmc0 = readl(priv->base + PIPGM_PWMC(pwm->hwpwm));
pwmc0_clk = pwmc0 & PIPGM_PWMC_CLK_MASK;
state->period = (period << pwmc0_clk) * NSEC_PER_USEC;
state->duty_cycle = (duty << pwmc0_clk) * NSEC_PER_USEC;
if (pwmc0 & PIPGM_PWMC_POLARITY_MASK)
state->polarity = PWM_POLARITY_INVERSED;
else
state->polarity = PWM_POLARITY_NORMAL;
state->enabled = true;
}
static const struct pwm_ops visconti_pwm_ops = {
.apply = visconti_pwm_apply,
.get_state = visconti_pwm_get_state,
.owner = THIS_MODULE,
};
static int visconti_pwm_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct visconti_pwm_chip *priv;
int ret;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(priv->base))
return PTR_ERR(priv->base);
priv->chip.dev = dev;
priv->chip.ops = &visconti_pwm_ops;
priv->chip.npwm = 4;
ret = devm_pwmchip_add(&pdev->dev, &priv->chip);
if (ret < 0)
return dev_err_probe(&pdev->dev, ret, "Cannot register visconti PWM\n");
return 0;
}
static const struct of_device_id visconti_pwm_of_match[] = {
{ .compatible = "toshiba,visconti-pwm", },
{ }
};
MODULE_DEVICE_TABLE(of, visconti_pwm_of_match);
static struct platform_driver visconti_pwm_driver = {
.driver = {
.name = "pwm-visconti",
.of_match_table = visconti_pwm_of_match,
},
.probe = visconti_pwm_probe,
};
module_platform_driver(visconti_pwm_driver);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>");
MODULE_ALIAS("platform:pwm-visconti");
|
