aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/host/ehci-fsl.h
blob: c95341d472f4e3d7f61adb9ed7296352cefd1732 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
/* SPDX-License-Identifier: GPL-2.0+ */
/* Copyright (C) 2005-2010,2012 Freescale Semiconductor, Inc.
 * Copyright (c) 2005 MontaVista Software
 */
#ifndef _EHCI_FSL_H
#define _EHCI_FSL_H

/* offsets for the non-ehci registers in the FSL SOC USB controller */
#define FSL_SOC_USB_SBUSCFG	0x90
#define SBUSCFG_INCR8		0x02	/* INCR8, specified */
#define FSL_SOC_USB_ULPIVP	0x170
#define FSL_SOC_USB_PORTSC1	0x184
#define PORT_PTS_MSK		(3<<30)
#define PORT_PTS_UTMI		(0<<30)
#define PORT_PTS_ULPI		(2<<30)
#define	PORT_PTS_SERIAL		(3<<30)
#define PORT_PTS_PTW		(1<<28)
#define FSL_SOC_USB_PORTSC2	0x188
#define FSL_SOC_USB_USBMODE	0x1a8
#define USBMODE_CM_MASK		(3 << 0)	/* controller mode mask */
#define USBMODE_CM_HOST		(3 << 0)	/* controller mode: host */
#define USBMODE_ES		(1 << 2)	/* (Big) Endian Select */

#define FSL_SOC_USB_USBGENCTRL	0x200
#define USBGENCTRL_PPP		(1 << 3)
#define USBGENCTRL_PFP		(1 << 2)
#define FSL_SOC_USB_ISIPHYCTRL	0x204
#define ISIPHYCTRL_PXE		(1)
#define ISIPHYCTRL_PHYE		(1 << 4)

#define FSL_SOC_USB_SNOOP1	0x400	/* NOTE: big-endian */
#define FSL_SOC_USB_SNOOP2	0x404	/* NOTE: big-endian */
#define FSL_SOC_USB_AGECNTTHRSH	0x408	/* NOTE: big-endian */
#define FSL_SOC_USB_PRICTRL	0x40c	/* NOTE: big-endian */
#define FSL_SOC_USB_SICTRL	0x410	/* NOTE: big-endian */
#define FSL_SOC_USB_CTRL	0x500	/* NOTE: big-endian */
#define CTRL_UTMI_PHY_EN	(1<<9)
#define CTRL_PHY_CLK_VALID	(1 << 17)
#define SNOOP_SIZE_2GB		0x1e

/* control Register Bit Masks */
#define CONTROL_REGISTER_W1C_MASK       0x00020000  /* W1C: PHY_CLK_VALID */
#define ULPI_INT_EN             (1<<0)
#define WU_INT_EN               (1<<1)
#define USB_CTRL_USB_EN         (1<<2)
#define LINE_STATE_FILTER__EN   (1<<3)
#define KEEP_OTG_ON             (1<<4)
#define OTG_PORT                (1<<5)
#define PLL_RESET               (1<<8)
#define UTMI_PHY_EN             (1<<9)
#define ULPI_PHY_CLK_SEL        (1<<10)
#define PHY_CLK_VALID		(1<<17)

/* Retry count for checking UTMI PHY CLK validity */
#define UTMI_PHY_CLK_VALID_CHK_RETRY 5
#endif				/* _EHCI_FSL_H */