1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
|
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2010-2013, The Linux Foundation. All rights reserved.
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/usb/ch11.h>
#define TEST_SE0_NAK_PID 0x0101
#define TEST_J_PID 0x0102
#define TEST_K_PID 0x0103
#define TEST_PACKET_PID 0x0104
#define TEST_HS_HOST_PORT_SUSPEND_RESUME 0x0106
#define TEST_SINGLE_STEP_GET_DEV_DESC 0x0107
#define TEST_SINGLE_STEP_SET_FEATURE 0x0108
static int ehset_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
int ret = -EINVAL;
struct usb_device *dev = interface_to_usbdev(intf);
struct usb_device *hub_udev = dev->parent;
struct usb_device_descriptor *buf;
u8 portnum = dev->portnum;
u16 test_pid = le16_to_cpu(dev->descriptor.idProduct);
switch (test_pid) {
case TEST_SE0_NAK_PID:
ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
USB_REQ_SET_FEATURE, USB_RT_PORT,
USB_PORT_FEAT_TEST,
(TEST_SE0_NAK << 8) | portnum,
NULL, 0, 1000);
break;
case TEST_J_PID:
ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
USB_REQ_SET_FEATURE, USB_RT_PORT,
USB_PORT_FEAT_TEST,
(TEST_J << 8) | portnum,
NULL, 0, 1000);
break;
case TEST_K_PID:
ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
USB_REQ_SET_FEATURE, USB_RT_PORT,
USB_PORT_FEAT_TEST,
(TEST_K << 8) | portnum,
NULL, 0, 1000);
break;
case TEST_PACKET_PID:
ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
USB_REQ_SET_FEATURE, USB_RT_PORT,
USB_PORT_FEAT_TEST,
(TEST_PACKET << 8) | portnum,
NULL, 0, 1000);
break;
case TEST_HS_HOST_PORT_SUSPEND_RESUME:
/* Test: wait for 15secs -> suspend -> 15secs delay -> resume */
msleep(15 * 1000);
ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
USB_REQ_SET_FEATURE, USB_RT_PORT,
USB_PORT_FEAT_SUSPEND, portnum,
NULL, 0, 1000);
if (ret < 0)
break;
msleep(15 * 1000);
ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
USB_REQ_CLEAR_FEATURE, USB_RT_PORT,
USB_PORT_FEAT_SUSPEND, portnum,
NULL, 0, 1000);
break;
case TEST_SINGLE_STEP_GET_DEV_DESC:
/* Test: wait for 15secs -> GetDescriptor request */
msleep(15 * 1000);
buf = kmalloc(USB_DT_DEVICE_SIZE, GFP_KERNEL);
if (!buf)
return -ENOMEM;
ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
USB_DT_DEVICE << 8, 0,
buf, USB_DT_DEVICE_SIZE,
USB_CTRL_GET_TIMEOUT);
kfree(buf);
break;
case TEST_SINGLE_STEP_SET_FEATURE:
/*
* GetDescriptor SETUP request -> 15secs delay -> IN & STATUS
*
* Note, this test is only supported on root hubs since the
* SetPortFeature handling can only be done inside the HCD's
* hub_control callback function.
*/
if (hub_udev != dev->bus->root_hub) {
dev_err(&intf->dev, "SINGLE_STEP_SET_FEATURE test only supported on root hub\n");
break;
}
ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
USB_REQ_SET_FEATURE, USB_RT_PORT,
USB_PORT_FEAT_TEST,
(6 << 8) | portnum,
NULL, 0, 60 * 1000);
break;
default:
dev_err(&intf->dev, "%s: unsupported PID: 0x%x\n",
__func__, test_pid);
}
return (ret < 0) ? ret : 0;
}
static void ehset_disconnect(struct usb_interface *intf)
{
}
static const struct usb_device_id ehset_id_table[] = {
{ USB_DEVICE(0x1a0a, TEST_SE0_NAK_PID) },
{ USB_DEVICE(0x1a0a, TEST_J_PID) },
{ USB_DEVICE(0x1a0a, TEST_K_PID) },
{ USB_DEVICE(0x1a0a, TEST_PACKET_PID) },
{ USB_DEVICE(0x1a0a, TEST_HS_HOST_PORT_SUSPEND_RESUME) },
{ USB_DEVICE(0x1a0a, TEST_SINGLE_STEP_GET_DEV_DESC) },
{ USB_DEVICE(0x1a0a, TEST_SINGLE_STEP_SET_FEATURE) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, ehset_id_table);
static struct usb_driver ehset_driver = {
.name = "usb_ehset_test",
.probe = ehset_probe,
.disconnect = ehset_disconnect,
.id_table = ehset_id_table,
};
module_usb_driver(ehset_driver);
MODULE_DESCRIPTION("USB Driver for EHSET Test Fixture");
MODULE_LICENSE("GPL v2");
|
