1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
|
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* matrox_w1.c
*
* Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
*/
#include <asm/types.h>
#include <linux/atomic.h>
#include <asm/io.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/list.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/timer.h>
#include <linux/slab.h>
#include <linux/pci_ids.h>
#include <linux/pci.h>
#include <linux/w1.h>
/*
* Matrox G400 DDC registers.
*/
#define MATROX_G400_DDC_CLK (1<<4)
#define MATROX_G400_DDC_DATA (1<<1)
#define MATROX_BASE 0x3C00
#define MATROX_STATUS 0x1e14
#define MATROX_PORT_INDEX_OFFSET 0x00
#define MATROX_PORT_DATA_OFFSET 0x0A
#define MATROX_GET_CONTROL 0x2A
#define MATROX_GET_DATA 0x2B
#define MATROX_CURSOR_CTL 0x06
struct matrox_device
{
void __iomem *base_addr;
void __iomem *port_index;
void __iomem *port_data;
u8 data_mask;
unsigned long phys_addr;
void __iomem *virt_addr;
unsigned long found;
struct w1_bus_master *bus_master;
};
/*
* These functions read and write DDC Data bit.
*
* Using tristate pins, since i can't find any open-drain pin in whole motherboard.
* Unfortunately we can't connect to Intel's 82801xx IO controller
* since we don't know motherboard schema, which has pretty unused(may be not) GPIO.
*
* I've heard that PIIX also has open drain pin.
*
* Port mapping.
*/
static __inline__ u8 matrox_w1_read_reg(struct matrox_device *dev, u8 reg)
{
u8 ret;
writeb(reg, dev->port_index);
ret = readb(dev->port_data);
barrier();
return ret;
}
static __inline__ void matrox_w1_write_reg(struct matrox_device *dev, u8 reg, u8 val)
{
writeb(reg, dev->port_index);
writeb(val, dev->port_data);
wmb();
}
static void matrox_w1_write_ddc_bit(void *data, u8 bit)
{
u8 ret;
struct matrox_device *dev = data;
if (bit)
bit = 0;
else
bit = dev->data_mask;
ret = matrox_w1_read_reg(dev, MATROX_GET_CONTROL);
matrox_w1_write_reg(dev, MATROX_GET_CONTROL, ((ret & ~dev->data_mask) | bit));
matrox_w1_write_reg(dev, MATROX_GET_DATA, 0x00);
}
static u8 matrox_w1_read_ddc_bit(void *data)
{
u8 ret;
struct matrox_device *dev = data;
ret = matrox_w1_read_reg(dev, MATROX_GET_DATA);
return ret;
}
static void matrox_w1_hw_init(struct matrox_device *dev)
{
matrox_w1_write_reg(dev, MATROX_GET_DATA, 0xFF);
matrox_w1_write_reg(dev, MATROX_GET_CONTROL, 0x00);
}
static int matrox_w1_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
struct matrox_device *dev;
int err;
if (pdev->vendor != PCI_VENDOR_ID_MATROX || pdev->device != PCI_DEVICE_ID_MATROX_G400)
return -ENODEV;
dev = kzalloc(sizeof(struct matrox_device) +
sizeof(struct w1_bus_master), GFP_KERNEL);
if (!dev) {
dev_err(&pdev->dev,
"%s: Failed to create new matrox_device object.\n",
__func__);
return -ENOMEM;
}
dev->bus_master = (struct w1_bus_master *)(dev + 1);
/*
* True for G400, for some other we need resource 0, see drivers/video/matrox/matroxfb_base.c
*/
dev->phys_addr = pci_resource_start(pdev, 1);
dev->virt_addr = ioremap(dev->phys_addr, 16384);
if (!dev->virt_addr) {
dev_err(&pdev->dev, "%s: failed to ioremap(0x%lx, %d).\n",
__func__, dev->phys_addr, 16384);
err = -EIO;
goto err_out_free_device;
}
dev->base_addr = dev->virt_addr + MATROX_BASE;
dev->port_index = dev->base_addr + MATROX_PORT_INDEX_OFFSET;
dev->port_data = dev->base_addr + MATROX_PORT_DATA_OFFSET;
dev->data_mask = (MATROX_G400_DDC_DATA);
matrox_w1_hw_init(dev);
dev->bus_master->data = dev;
dev->bus_master->read_bit = &matrox_w1_read_ddc_bit;
dev->bus_master->write_bit = &matrox_w1_write_ddc_bit;
err = w1_add_master_device(dev->bus_master);
if (err)
goto err_out_free_device;
pci_set_drvdata(pdev, dev);
dev->found = 1;
dev_info(&pdev->dev, "Matrox G400 GPIO transport layer for 1-wire.\n");
return 0;
err_out_free_device:
if (dev->virt_addr)
iounmap(dev->virt_addr);
kfree(dev);
return err;
}
static void matrox_w1_remove(struct pci_dev *pdev)
{
struct matrox_device *dev = pci_get_drvdata(pdev);
if (dev->found) {
w1_remove_master_device(dev->bus_master);
iounmap(dev->virt_addr);
}
kfree(dev);
}
static struct pci_device_id matrox_w1_tbl[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G400) },
{ },
};
MODULE_DEVICE_TABLE(pci, matrox_w1_tbl);
static struct pci_driver matrox_w1_pci_driver = {
.name = "matrox_w1",
.id_table = matrox_w1_tbl,
.probe = matrox_w1_probe,
.remove = matrox_w1_remove,
};
module_pci_driver(matrox_w1_pci_driver);
MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
MODULE_DESCRIPTION("Driver for transport(Dallas 1-wire protocol) over VGA DDC(matrox gpio).");
MODULE_LICENSE("GPL");
|
