1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
|
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef LINUX_SSB_PCICORE_H_
#define LINUX_SSB_PCICORE_H_
#include <linux/types.h>
struct pci_dev;
#ifdef CONFIG_SSB_DRIVER_PCICORE
/* PCI core registers. */
#define SSB_PCICORE_CTL 0x0000 /* PCI Control */
#define SSB_PCICORE_CTL_RST_OE 0x00000001 /* PCI_RESET Output Enable */
#define SSB_PCICORE_CTL_RST 0x00000002 /* PCI_RESET driven out to pin */
#define SSB_PCICORE_CTL_CLK_OE 0x00000004 /* Clock gate Output Enable */
#define SSB_PCICORE_CTL_CLK 0x00000008 /* Gate for clock driven out to pin */
#define SSB_PCICORE_ARBCTL 0x0010 /* PCI Arbiter Control */
#define SSB_PCICORE_ARBCTL_INTERN 0x00000001 /* Use internal arbiter */
#define SSB_PCICORE_ARBCTL_EXTERN 0x00000002 /* Use external arbiter */
#define SSB_PCICORE_ARBCTL_PARKID 0x00000006 /* Mask, selects which agent is parked on an idle bus */
#define SSB_PCICORE_ARBCTL_PARKID_LAST 0x00000000 /* Last requestor */
#define SSB_PCICORE_ARBCTL_PARKID_4710 0x00000002 /* 4710 */
#define SSB_PCICORE_ARBCTL_PARKID_EXT0 0x00000004 /* External requestor 0 */
#define SSB_PCICORE_ARBCTL_PARKID_EXT1 0x00000006 /* External requestor 1 */
#define SSB_PCICORE_ISTAT 0x0020 /* Interrupt status */
#define SSB_PCICORE_ISTAT_INTA 0x00000001 /* PCI INTA# */
#define SSB_PCICORE_ISTAT_INTB 0x00000002 /* PCI INTB# */
#define SSB_PCICORE_ISTAT_SERR 0x00000004 /* PCI SERR# (write to clear) */
#define SSB_PCICORE_ISTAT_PERR 0x00000008 /* PCI PERR# (write to clear) */
#define SSB_PCICORE_ISTAT_PME 0x00000010 /* PCI PME# */
#define SSB_PCICORE_IMASK 0x0024 /* Interrupt mask */
#define SSB_PCICORE_IMASK_INTA 0x00000001 /* PCI INTA# */
#define SSB_PCICORE_IMASK_INTB 0x00000002 /* PCI INTB# */
#define SSB_PCICORE_IMASK_SERR 0x00000004 /* PCI SERR# */
#define SSB_PCICORE_IMASK_PERR 0x00000008 /* PCI PERR# */
#define SSB_PCICORE_IMASK_PME 0x00000010 /* PCI PME# */
#define SSB_PCICORE_MBOX 0x0028 /* Backplane to PCI Mailbox */
#define SSB_PCICORE_MBOX_F0_0 0x00000100 /* PCI function 0, INT 0 */
#define SSB_PCICORE_MBOX_F0_1 0x00000200 /* PCI function 0, INT 1 */
#define SSB_PCICORE_MBOX_F1_0 0x00000400 /* PCI function 1, INT 0 */
#define SSB_PCICORE_MBOX_F1_1 0x00000800 /* PCI function 1, INT 1 */
#define SSB_PCICORE_MBOX_F2_0 0x00001000 /* PCI function 2, INT 0 */
#define SSB_PCICORE_MBOX_F2_1 0x00002000 /* PCI function 2, INT 1 */
#define SSB_PCICORE_MBOX_F3_0 0x00004000 /* PCI function 3, INT 0 */
#define SSB_PCICORE_MBOX_F3_1 0x00008000 /* PCI function 3, INT 1 */
#define SSB_PCICORE_BCAST_ADDR 0x0050 /* Backplane Broadcast Address */
#define SSB_PCICORE_BCAST_ADDR_MASK 0x000000FF
#define SSB_PCICORE_BCAST_DATA 0x0054 /* Backplane Broadcast Data */
#define SSB_PCICORE_GPIO_IN 0x0060 /* rev >= 2 only */
#define SSB_PCICORE_GPIO_OUT 0x0064 /* rev >= 2 only */
#define SSB_PCICORE_GPIO_ENABLE 0x0068 /* rev >= 2 only */
#define SSB_PCICORE_GPIO_CTL 0x006C /* rev >= 2 only */
#define SSB_PCICORE_SBTOPCI0 0x0100 /* Backplane to PCI translation 0 (sbtopci0) */
#define SSB_PCICORE_SBTOPCI0_MASK 0xFC000000
#define SSB_PCICORE_SBTOPCI1 0x0104 /* Backplane to PCI translation 1 (sbtopci1) */
#define SSB_PCICORE_SBTOPCI1_MASK 0xFC000000
#define SSB_PCICORE_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */
#define SSB_PCICORE_SBTOPCI2_MASK 0xC0000000
#define SSB_PCICORE_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */
#define SSB_PCICORE_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */
#define SSB_PCICORE_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */
#define SSB_PCICORE_PCICFG3 0x0700 /* PCI config space 3 (rev >= 8) */
#define SSB_PCICORE_SPROM(wordoffset) (0x0800 + ((wordoffset) * 2)) /* SPROM shadow area (72 bytes) */
/* SBtoPCIx */
#define SSB_PCICORE_SBTOPCI_MEM 0x00000000
#define SSB_PCICORE_SBTOPCI_IO 0x00000001
#define SSB_PCICORE_SBTOPCI_CFG0 0x00000002
#define SSB_PCICORE_SBTOPCI_CFG1 0x00000003
#define SSB_PCICORE_SBTOPCI_PREF 0x00000004 /* Prefetch enable */
#define SSB_PCICORE_SBTOPCI_BURST 0x00000008 /* Burst enable */
#define SSB_PCICORE_SBTOPCI_MRM 0x00000020 /* Memory Read Multiple */
#define SSB_PCICORE_SBTOPCI_RC 0x00000030 /* Read Command mask (rev >= 11) */
#define SSB_PCICORE_SBTOPCI_RC_READ 0x00000000 /* Memory read */
#define SSB_PCICORE_SBTOPCI_RC_READL 0x00000010 /* Memory read line */
#define SSB_PCICORE_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */
/* PCIcore specific boardflags */
#define SSB_PCICORE_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */
struct ssb_pcicore {
struct ssb_device *dev;
u8 setup_done:1;
u8 hostmode:1;
u8 cardbusmode:1;
};
extern void ssb_pcicore_init(struct ssb_pcicore *pc);
/* Enable IRQ routing for a specific device */
extern int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
struct ssb_device *dev);
int ssb_pcicore_plat_dev_init(struct pci_dev *d);
int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
#else /* CONFIG_SSB_DRIVER_PCICORE */
struct ssb_pcicore {
};
static inline
void ssb_pcicore_init(struct ssb_pcicore *pc)
{
}
static inline
int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
struct ssb_device *dev)
{
return 0;
}
static inline
int ssb_pcicore_plat_dev_init(struct pci_dev *d)
{
return -ENODEV;
}
static inline
int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
return -ENODEV;
}
#endif /* CONFIG_SSB_DRIVER_PCICORE */
#endif /* LINUX_SSB_PCICORE_H_ */
|
