aboutsummaryrefslogtreecommitdiff
path: root/include/configs
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs')
-rw-r--r--include/configs/APC405.h1
-rw-r--r--include/configs/ASH405.h1
-rw-r--r--include/configs/B2.h1
-rw-r--r--include/configs/CATcenter.h1
-rw-r--r--include/configs/CMS700.h1
-rw-r--r--include/configs/CPCI2DP.h1
-rw-r--r--include/configs/CPCI405.h1
-rw-r--r--include/configs/CPCI4052.h1
-rw-r--r--include/configs/CPCI405AB.h1
-rw-r--r--include/configs/CPCI405DT.h1
-rw-r--r--include/configs/CPCIISER4.h1
-rw-r--r--include/configs/DP405.h1
-rw-r--r--include/configs/DU405.h1
-rw-r--r--include/configs/DU440.h1
-rw-r--r--include/configs/G2000.h1
-rw-r--r--include/configs/HH405.h1
-rw-r--r--include/configs/HUB405.h1
-rw-r--r--include/configs/MIP405.h1
-rw-r--r--include/configs/MPC8323ERDB.h1
-rw-r--r--include/configs/OCRTC.h1
-rw-r--r--include/configs/ORSG.h1
-rw-r--r--include/configs/PCI405.h1
-rw-r--r--include/configs/PIP405.h1
-rw-r--r--include/configs/PLU405.h1
-rw-r--r--include/configs/PMC405.h1
-rw-r--r--include/configs/PMC440.h1
-rw-r--r--include/configs/PPChameleonEVB.h1
-rw-r--r--include/configs/TASREG.h1
-rw-r--r--include/configs/TQM8272.h1
-rw-r--r--include/configs/TQM834x.h1
-rw-r--r--include/configs/TQM85xx.h1
-rw-r--r--include/configs/VOH405.h1
-rw-r--r--include/configs/VOM405.h1
-rw-r--r--include/configs/W7OLMC.h1
-rw-r--r--include/configs/W7OLMG.h1
-rw-r--r--include/configs/WUH405.h1
-rw-r--r--include/configs/XPEDITE1K.h1
-rw-r--r--include/configs/acadia.h1
-rw-r--r--include/configs/alpr.h1
-rw-r--r--include/configs/bamboo.h1
-rw-r--r--include/configs/canyonlands.h1
-rw-r--r--include/configs/ebony.h1
-rw-r--r--include/configs/ep82xxm.h1
-rw-r--r--include/configs/hcu4.h1
-rw-r--r--include/configs/hcu5.h1
-rw-r--r--include/configs/hymod.h1
-rw-r--r--include/configs/katmai.h1
-rw-r--r--include/configs/luan.h1
-rw-r--r--include/configs/lwmon5.h1
-rw-r--r--include/configs/mcu25.h1
-rw-r--r--include/configs/motionpro.h1
-rw-r--r--include/configs/muas3001.h1
-rw-r--r--include/configs/mucmc52.h2
-rw-r--r--include/configs/ocotea.h1
-rw-r--r--include/configs/p3p440.h1
-rw-r--r--include/configs/pcs440ep.h1
-rw-r--r--include/configs/sequoia.h1
-rw-r--r--include/configs/socrates.h1
-rw-r--r--include/configs/stxssa.h1
-rw-r--r--include/configs/taishan.h1
-rw-r--r--include/configs/uc101.h2
-rw-r--r--include/configs/walnut.h1
-rw-r--r--include/configs/yosemite.h1
-rw-r--r--include/configs/zeus.h1
64 files changed, 0 insertions, 66 deletions
diff --git a/include/configs/APC405.h b/include/configs/APC405.h
index fa7798e8ff0..4d6b7ac4492 100644
--- a/include/configs/APC405.h
+++ b/include/configs/APC405.h
@@ -315,7 +315,6 @@ extern int flash_banks;
/* 16 byte page write mode using*/
/* last 4 bits of the address */
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
/*
* External Bus Controller (EBC) Setup
diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h
index 228571419d0..9b08af51b79 100644
--- a/include/configs/ASH405.h
+++ b/include/configs/ASH405.h
@@ -256,7 +256,6 @@
/* 16 byte page write mode using*/
/* last 4 bits of the address */
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
/*
* Init Memory Controller:
diff --git a/include/configs/B2.h b/include/configs/B2.h
index 1a8114b3173..a7cb3e22e92 100644
--- a/include/configs/B2.h
+++ b/include/configs/B2.h
@@ -194,7 +194,6 @@
/* 16 byte page write mode using*/
/* last 4 bits of the address */
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
/* Flash banks JFFS2 should use */
/*
diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h
index 8862898ce39..6946871e0d6 100644
--- a/include/configs/CATcenter.h
+++ b/include/configs/CATcenter.h
@@ -419,7 +419,6 @@
/* 16 byte page write mode using*/
/* last 4 bits of the address */
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
/*-----------------------------------------------------------------------
* Cache Configuration
diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h
index 7c5efc2ea68..9aec7466210 100644
--- a/include/configs/CMS700.h
+++ b/include/configs/CMS700.h
@@ -268,7 +268,6 @@
/* 16 byte page write mode using*/
/* last 4 bits of the address */
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
#define CFG_EEPROM_WREN 1
diff --git a/include/configs/CPCI2DP.h b/include/configs/CPCI2DP.h
index bd627e198fd..208f1a21166 100644
--- a/include/configs/CPCI2DP.h
+++ b/include/configs/CPCI2DP.h
@@ -219,7 +219,6 @@
/* 16 byte page write mode using*/
/* last 4 bits of the address */
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
#define CFG_EEPROM_WREN 1
diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h
index 85231341b60..2e948f54481 100644
--- a/include/configs/CPCI405.h
+++ b/include/configs/CPCI405.h
@@ -264,7 +264,6 @@
/* 16 byte page write mode using*/
/* last 4 bits of the address */
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
/*
* Init Memory Controller:
diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h
index 228821a04e4..199f577613e 100644
--- a/include/configs/CPCI4052.h
+++ b/include/configs/CPCI4052.h
@@ -283,7 +283,6 @@
/* 16 byte page write mode using*/
/* last 4 bits of the address */
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
/*
* Init Memory Controller:
diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h
index 065b85547ab..cd8a65bce04 100644
--- a/include/configs/CPCI405AB.h
+++ b/include/configs/CPCI405AB.h
@@ -259,7 +259,6 @@
/* 32 byte page write mode using*/
/* last 5 bits of the address */
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
/* Use EEPROM for environment variables */
diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h
index ffbe0363466..c67e51c0bfe 100644
--- a/include/configs/CPCI405DT.h
+++ b/include/configs/CPCI405DT.h
@@ -286,7 +286,6 @@
/* 16 byte page write mode using*/
/* last 4 bits of the address */
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
/*
* Init Memory Controller:
diff --git a/include/configs/CPCIISER4.h b/include/configs/CPCIISER4.h
index bfb42421f5c..d7e97394548 100644
--- a/include/configs/CPCIISER4.h
+++ b/include/configs/CPCIISER4.h
@@ -198,7 +198,6 @@
/* 16 byte page write mode using*/
/* last 4 bits of the address */
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
#define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
#define CONFIG_ENV_OFFSET 0x000 /* environment starts at the beginning of the EEPROM */
diff --git a/include/configs/DP405.h b/include/configs/DP405.h
index acc2bd2639e..df9bc7af46d 100644
--- a/include/configs/DP405.h
+++ b/include/configs/DP405.h
@@ -239,7 +239,6 @@
/* 16 byte page write mode using*/
/* last 4 bits of the address */
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
/*-----------------------------------------------------------------------
* External Bus Controller (EBC) Setup
diff --git a/include/configs/DU405.h b/include/configs/DU405.h
index 7debc69af31..b93e2a8ab4c 100644
--- a/include/configs/DU405.h
+++ b/include/configs/DU405.h
@@ -225,7 +225,6 @@
/* 16 byte page write mode using*/
/* last 4 bits of the address */
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
#define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
#define CONFIG_ENV_OFFSET 0x000 /* environment starts at the beginning of the EEPROM */
diff --git a/include/configs/DU440.h b/include/configs/DU440.h
index fd0c046ce6b..c408e43ec86 100644
--- a/include/configs/DU440.h
+++ b/include/configs/DU440.h
@@ -182,7 +182,6 @@
#define CFG_I2C_MULTI_EEPROMS
#define CFG_I2C_EEPROM_ADDR 0x54
#define CFG_I2C_EEPROM_ADDR_LEN 2
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
#define CFG_EEPROM_PAGE_WRITE_BITS 5
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x01
diff --git a/include/configs/G2000.h b/include/configs/G2000.h
index 81a12f159d6..f43d0c59456 100644
--- a/include/configs/G2000.h
+++ b/include/configs/G2000.h
@@ -328,7 +328,6 @@
/* 16 byte page write mode using*/
/* last 4 bits of the address */
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
/*-----------------------------------------------------------------------
* External Bus Controller (EBC) Setup
diff --git a/include/configs/HH405.h b/include/configs/HH405.h
index 7ff03b17a70..52baae08ca9 100644
--- a/include/configs/HH405.h
+++ b/include/configs/HH405.h
@@ -360,7 +360,6 @@
/* last 5 bits of the address */
#endif
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
/*-----------------------------------------------------------------------
* External Bus Controller (EBC) Setup
diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h
index 0727606bbb8..2a61e779ef1 100644
--- a/include/configs/HUB405.h
+++ b/include/configs/HUB405.h
@@ -255,7 +255,6 @@
/* 16 byte page write mode using*/
/* last 4 bits of the address */
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
/*
* Init Memory Controller:
diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h
index 4527c17eac7..28b38026042 100644
--- a/include/configs/MIP405.h
+++ b/include/configs/MIP405.h
@@ -110,7 +110,6 @@
#define CFG_EEPROM_PAGE_WRITE_BITS 6 /* The Atmel 24C128/256 has */
/* 64 byte page write mode using*/
/* last 6 bits of the address */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE /* enable Page write */
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h
index 1ae5bae7c0f..b95f54d9e89 100644
--- a/include/configs/MPC8323ERDB.h
+++ b/include/configs/MPC8323ERDB.h
@@ -328,7 +328,6 @@
#define CFG_I2C_EEPROM_ADDR_LEN 2
#define CFG_EEPROM_PAGE_WRITE_BITS 6
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
/*
* General PCI
diff --git a/include/configs/OCRTC.h b/include/configs/OCRTC.h
index 17b00a15f9b..14dabdcd743 100644
--- a/include/configs/OCRTC.h
+++ b/include/configs/OCRTC.h
@@ -220,7 +220,6 @@
/* 16 byte page write mode using*/
/* last 4 bits of the address */
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
/*
* Init Memory Controller:
diff --git a/include/configs/ORSG.h b/include/configs/ORSG.h
index 4f4b13ddbf4..289bba547ca 100644
--- a/include/configs/ORSG.h
+++ b/include/configs/ORSG.h
@@ -218,7 +218,6 @@
/* 16 byte page write mode using*/
/* last 4 bits of the address */
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
/*
* Init Memory Controller:
diff --git a/include/configs/PCI405.h b/include/configs/PCI405.h
index 2837b51175c..b0ca5a85e45 100644
--- a/include/configs/PCI405.h
+++ b/include/configs/PCI405.h
@@ -249,7 +249,6 @@
/* 16 byte page write mode using*/
/* last 4 bits of the address */
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
/*
* Init Memory Controller:
diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h
index 895b89c2046..6e8d7ada192 100644
--- a/include/configs/PIP405.h
+++ b/include/configs/PIP405.h
@@ -103,7 +103,6 @@
#define CFG_EEPROM_PAGE_WRITE_BITS 6 /* The Atmel 24C128/256 has */
/* 64 byte page write mode using*/
/* last 6 bits of the address */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE /* enable Page write */
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h
index 8463ed52b99..337cbfb1e23 100644
--- a/include/configs/PLU405.h
+++ b/include/configs/PLU405.h
@@ -295,7 +295,6 @@
/* 16 byte page write mode using */
/* last 4 bits of the address */
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
/*
* External Bus Controller (EBC) Setup
diff --git a/include/configs/PMC405.h b/include/configs/PMC405.h
index e5430592d19..4a425737091 100644
--- a/include/configs/PMC405.h
+++ b/include/configs/PMC405.h
@@ -267,7 +267,6 @@
/* 16 byte page write mode using*/
/* last 4 bits of the address */
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
/*-----------------------------------------------------------------------
* External Bus Controller (EBC) Setup
diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h
index 467a11c1078..963987e1e34 100644
--- a/include/configs/PMC440.h
+++ b/include/configs/PMC440.h
@@ -233,7 +233,6 @@
#define CFG_I2C_EEPROM_ADDR 0x54
#define CFG_I2C_EEPROM_ADDR_LEN 2
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
#define CFG_EEPROM_PAGE_WRITE_BITS 5
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x01
diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h
index cc3ef1c3925..d9d87060baf 100644
--- a/include/configs/PPChameleonEVB.h
+++ b/include/configs/PPChameleonEVB.h
@@ -452,7 +452,6 @@
/* 16 byte page write mode using*/
/* last 4 bits of the address */
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
/*
* Init Memory Controller:
diff --git a/include/configs/TASREG.h b/include/configs/TASREG.h
index dd074dc5cd7..d27a54ed29c 100644
--- a/include/configs/TASREG.h
+++ b/include/configs/TASREG.h
@@ -148,7 +148,6 @@
/* 32 byte page write mode using*/
/* last 5 bits of the address */
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
#if defined (CONFIG_SOFT_I2C)
#if 0 /* push-pull */
diff --git a/include/configs/TQM8272.h b/include/configs/TQM8272.h
index 4e8cccd9a73..072608c735b 100644
--- a/include/configs/TQM8272.h
+++ b/include/configs/TQM8272.h
@@ -119,7 +119,6 @@
#define CFG_I2C_EEPROM_ADDR_LEN 2
#define CFG_EEPROM_PAGE_WRITE_BITS 4
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE /* necessary for the LM75 chip */
#define CFG_I2C_MULTI_EEPROMS 1 /* more than one eeprom */
/* I2C RTC */
diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index 3fd46a0966d..7b062f41ace 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -213,7 +213,6 @@ extern int tqm834x_num_flash_banks;
#define CFG_I2C_EEPROM_ADDR 0x50 /* 1010000x */
#define CFG_I2C_EEPROM_ADDR_LEN 2 /* 16 bit */
#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* 32 bytes per write */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 12 /* 10ms +/- 20% */
#define CFG_I2C_MULTI_EEPROMS 1 /* more than one eeprom */
diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h
index fcf0f59ba57..7ecbb7ebc9f 100644
--- a/include/configs/TQM85xx.h
+++ b/include/configs/TQM85xx.h
@@ -323,7 +323,6 @@
#define CFG_I2C_EEPROM_ADDR 0x50 /* 1010000x */
#define CFG_I2C_EEPROM_ADDR_LEN 2
#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20
#define CFG_I2C_MULTI_EEPROMS 1 /* more than one eeprom */
diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h
index d5c0a5e05c0..93d049f4064 100644
--- a/include/configs/VOH405.h
+++ b/include/configs/VOH405.h
@@ -292,7 +292,6 @@
/* 32 byte page write mode using*/
/* last 5 bits of the address */
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
/*-----------------------------------------------------------------------
* External Bus Controller (EBC) Setup
diff --git a/include/configs/VOM405.h b/include/configs/VOM405.h
index b952e0cbd42..5c147306c6d 100644
--- a/include/configs/VOM405.h
+++ b/include/configs/VOM405.h
@@ -214,7 +214,6 @@
/* 16 byte page write mode using*/
/* last 4 bits of the address */
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
/*
* External Bus Controller (EBC) Setup
diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h
index 95e45560767..6a51880a8a3 100644
--- a/include/configs/W7OLMC.h
+++ b/include/configs/W7OLMC.h
@@ -279,7 +279,6 @@
#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
/* mask of address bits that overflow into the "EEPROM chip address" */
#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
#define CFG_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */
/* 16 byte page write mode using*/
/* last 4 bits of the address */
diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h
index 9c5bbff9fee..c3b39f21861 100644
--- a/include/configs/W7OLMG.h
+++ b/include/configs/W7OLMG.h
@@ -284,7 +284,6 @@
#define CFG_I2C_EEPROM_ADDR 0x50 /* EEPROM ATMEL 24C04N */
#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
#define CFG_EEPROM_PAGE_WRITE_BITS 3
#define CFG_I2C_MULTI_EEPROMS
/*-----------------------------------------------------------------------
diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h
index c3fc3afeac5..afe1da9954d 100644
--- a/include/configs/WUH405.h
+++ b/include/configs/WUH405.h
@@ -252,7 +252,6 @@
/* 16 byte page write mode using*/
/* last 4 bits of the address */
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
/*
* Init Memory Controller:
diff --git a/include/configs/XPEDITE1K.h b/include/configs/XPEDITE1K.h
index 77b29f48af3..d533b17afd0 100644
--- a/include/configs/XPEDITE1K.h
+++ b/include/configs/XPEDITE1K.h
@@ -156,7 +156,6 @@ extern void out32(unsigned int, unsigned long);
#define CONFIG_ENV_OFFSET 0x100
#define CFG_I2C_EEPROM_ADDR 0x50 /* this is actually the second page of the eeprom */
#define CFG_I2C_EEPROM_ADDR_LEN 1
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
#define CFG_EEPROM_PAGE_WRITE_BITS 3
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
diff --git a/include/configs/acadia.h b/include/configs/acadia.h
index 1b1fd296c3b..29a8eb693a5 100644
--- a/include/configs/acadia.h
+++ b/include/configs/acadia.h
@@ -203,7 +203,6 @@
#define CFG_I2C_MULTI_EEPROMS
#define CFG_I2C_EEPROM_ADDR (0xa8>>1)
#define CFG_I2C_EEPROM_ADDR_LEN 1
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
#define CFG_EEPROM_PAGE_WRITE_BITS 3
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
diff --git a/include/configs/alpr.h b/include/configs/alpr.h
index c80c76afd56..8c4eb59fa35 100644
--- a/include/configs/alpr.h
+++ b/include/configs/alpr.h
@@ -133,7 +133,6 @@
/* 8 byte page write mode using */
/* last 3 bits of the address */
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 40 /* and takes up to 40 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
#define CONFIG_PREBOOT "echo;" \
"echo Type \"run kernelx\" to boot the system;" \
diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h
index 31c725f0113..773b15a5e64 100644
--- a/include/configs/bamboo.h
+++ b/include/configs/bamboo.h
@@ -229,7 +229,6 @@
#define CFG_I2C_MULTI_EEPROMS
#define CFG_I2C_EEPROM_ADDR (0xa8>>1)
#define CFG_I2C_EEPROM_ADDR_LEN 1
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
#define CFG_EEPROM_PAGE_WRITE_BITS 3
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h
index 2f162e1f1a8..cd3e6a311f8 100644
--- a/include/configs/canyonlands.h
+++ b/include/configs/canyonlands.h
@@ -243,7 +243,6 @@
#define CFG_I2C_MULTI_EEPROMS
#define CFG_I2C_EEPROM_ADDR (0xa8>>1)
#define CFG_I2C_EEPROM_ADDR_LEN 1
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
#define CFG_EEPROM_PAGE_WRITE_BITS 3
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
diff --git a/include/configs/ebony.h b/include/configs/ebony.h
index 3affdd2f668..2c9c9c1d353 100644
--- a/include/configs/ebony.h
+++ b/include/configs/ebony.h
@@ -143,7 +143,6 @@
#define CFG_I2C_MULTI_EEPROMS
#define CFG_I2C_EEPROM_ADDR (0xa8>>1)
#define CFG_I2C_EEPROM_ADDR_LEN 1
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
#define CFG_EEPROM_PAGE_WRITE_BITS 3
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
diff --git a/include/configs/ep82xxm.h b/include/configs/ep82xxm.h
index a5019001baa..60df12fcea5 100644
--- a/include/configs/ep82xxm.h
+++ b/include/configs/ep82xxm.h
@@ -220,7 +220,6 @@
#define CFG_I2C_EEPROM_ADDR 0x54
#define CFG_I2C_EEPROM_ADDR_LEN 1
#define CFG_EEPROM_PAGE_WRITE_BITS 3
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
#ifdef CONFIG_ENV_IS_IN_EEPROM
diff --git a/include/configs/hcu4.h b/include/configs/hcu4.h
index b51ea4ea31c..0a9800a1f5b 100644
--- a/include/configs/hcu4.h
+++ b/include/configs/hcu4.h
@@ -162,7 +162,6 @@
#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07
#define CFG_EEPROM_PAGE_WRITE_BITS 4
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
#undef CFG_I2C_MULTI_EEPROMS
diff --git a/include/configs/hcu5.h b/include/configs/hcu5.h
index 1874ff238f3..6b23839ecc5 100644
--- a/include/configs/hcu5.h
+++ b/include/configs/hcu5.h
@@ -163,7 +163,6 @@
#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07
#define CFG_EEPROM_PAGE_WRITE_BITS 4
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
#undef CFG_I2C_MULTI_EEPROMS
diff --git a/include/configs/hymod.h b/include/configs/hymod.h
index 9c704c651da..4c83193f8c1 100644
--- a/include/configs/hymod.h
+++ b/include/configs/hymod.h
@@ -288,7 +288,6 @@
/* mask of address bits that overflow into the "EEPROM chip address" */
#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07
-#define CFG_EEPROM_PAGE_WRITE_ENABLE 1 /* write eeprom in pages */
#define CFG_EEPROM_PAGE_WRITE_BITS 4 /* 16 byte write page size */
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
diff --git a/include/configs/katmai.h b/include/configs/katmai.h
index fac284456ab..b0dc175afed 100644
--- a/include/configs/katmai.h
+++ b/include/configs/katmai.h
@@ -132,7 +132,6 @@
#define CFG_I2C_MULTI_EEPROMS
#define CFG_I2C_EEPROM_ADDR (0x50)
#define CFG_I2C_EEPROM_ADDR_LEN 1
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
#define CFG_EEPROM_PAGE_WRITE_BITS 3
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
diff --git a/include/configs/luan.h b/include/configs/luan.h
index 2259ec34de0..21a6c2987fa 100644
--- a/include/configs/luan.h
+++ b/include/configs/luan.h
@@ -139,7 +139,6 @@
#define CFG_I2C_MULTI_EEPROMS
#define CFG_I2C_EEPROM_ADDR (0xa8>>1)
#define CFG_I2C_EEPROM_ADDR_LEN 1
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
#define CFG_EEPROM_PAGE_WRITE_BITS 3
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index c09e301ce05..7540c8e852a 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -267,7 +267,6 @@
/* 64 byte page write mode using*/
/* last 6 bits of the address */
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
#define CONFIG_RTC_PCF8563 1 /* enable Philips PCF8563 RTC */
#define CFG_I2C_RTC_ADDR 0x51 /* Philips PCF8563 RTC address */
diff --git a/include/configs/mcu25.h b/include/configs/mcu25.h
index 9a83f083a8a..80011eb044a 100644
--- a/include/configs/mcu25.h
+++ b/include/configs/mcu25.h
@@ -162,7 +162,6 @@
#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07
#define CFG_EEPROM_PAGE_WRITE_BITS 4
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
#undef CFG_I2C_MULTI_EEPROMS
diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h
index 73a03a8ee5d..cae49de1a29 100644
--- a/include/configs/motionpro.h
+++ b/include/configs/motionpro.h
@@ -308,7 +308,6 @@
* EEPROM configuration
*/
#define CFG_I2C_EEPROM_ADDR_LEN 1
-#define CFG_EEPROM_PAGE_WRITE_ENABLE 1 /* DTT driver needs this */
#define CFG_EEPROM_PAGE_WRITE_BITS 1 /* 2 bytes per write cycle */
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 5 /* 2ms/cycle + 3ms extra */
#define CFG_I2C_MULTI_EEPROMS 1 /* 2 EEPROMs (addr:50,52) */
diff --git a/include/configs/muas3001.h b/include/configs/muas3001.h
index c6618297923..1e91b621682 100644
--- a/include/configs/muas3001.h
+++ b/include/configs/muas3001.h
@@ -241,7 +241,6 @@
#define CFG_I2C_SPEED 100000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
#define CFG_EEPROM_PAGE_WRITE_BITS 3
/* I2C SYSMON (LM75, AD7414 is almost compatible) */
#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */
diff --git a/include/configs/mucmc52.h b/include/configs/mucmc52.h
index 8971f0b6c8d..517b3b7e4c9 100644
--- a/include/configs/mucmc52.h
+++ b/include/configs/mucmc52.h
@@ -136,8 +136,6 @@
#define CFG_I2C_EEPROM_ADDR_LEN 1
#define CFG_EEPROM_PAGE_WRITE_BITS 4
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
-/* for LM81 */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
/*
* RTC configuration
diff --git a/include/configs/ocotea.h b/include/configs/ocotea.h
index 6a8665e4e25..d9b277c0e48 100644
--- a/include/configs/ocotea.h
+++ b/include/configs/ocotea.h
@@ -157,7 +157,6 @@
#define CFG_I2C_MULTI_EEPROMS
#define CFG_I2C_EEPROM_ADDR (0xa8>>1)
#define CFG_I2C_EEPROM_ADDR_LEN 1
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
#define CFG_EEPROM_PAGE_WRITE_BITS 3
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h
index 5cef3ea6911..da3ce5456a7 100644
--- a/include/configs/p3p440.h
+++ b/include/configs/p3p440.h
@@ -112,7 +112,6 @@
/* 8 byte page write mode using */
/* last 3 bits of the address */
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 40 /* and takes up to 40 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
/*-----------------------------------------------------------------------
* Default configuration (environment varibles...)
diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h
index 62f13f2959a..66075d28249 100644
--- a/include/configs/pcs440ep.h
+++ b/include/configs/pcs440ep.h
@@ -143,7 +143,6 @@
#define CFG_I2C_EEPROM_ADDR (0xa4>>1)
#define CFG_I2C_EEPROM_ADDR_LEN 1
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
#define CFG_EEPROM_PAGE_WRITE_BITS 3
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index d39a894d2a3..35331e8ae74 100644
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -225,7 +225,6 @@
#define CFG_I2C_MULTI_EEPROMS
#define CFG_I2C_EEPROM_ADDR (0xa8>>1)
#define CFG_I2C_EEPROM_ADDR_LEN 1
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
#define CFG_EEPROM_PAGE_WRITE_BITS 3
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
diff --git a/include/configs/socrates.h b/include/configs/socrates.h
index bbb9d18b5ba..c4255f14e70 100644
--- a/include/configs/socrates.h
+++ b/include/configs/socrates.h
@@ -263,7 +263,6 @@
#define CFG_DTT_MAX_TEMP 125
#define CFG_DTT_LOW_TEMP -55
#define CFG_DTT_HYSTERESIS 3
-#define CFG_EEPROM_PAGE_WRITE_ENABLE /* necessary for the LM75 chip */
#define CFG_EEPROM_PAGE_WRITE_BITS 4
/*
diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h
index 5926943d9ab..c49538e19cb 100644
--- a/include/configs/stxssa.h
+++ b/include/configs/stxssa.h
@@ -216,7 +216,6 @@
#define CFG_I2C_EEPROM_ADDR 0x51 /* 1010001x */
#define CFG_I2C_EEPROM_ADDR_LEN 2
#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20
/*
diff --git a/include/configs/taishan.h b/include/configs/taishan.h
index 08ec14c7fa8..2422ae788dd 100644
--- a/include/configs/taishan.h
+++ b/include/configs/taishan.h
@@ -139,7 +139,6 @@
#undef CFG_I2C_MULTI_EEPROMS
#define CFG_I2C_EEPROM_ADDR 0x50
#define CFG_I2C_EEPROM_ADDR_LEN 1
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
#define CFG_EEPROM_PAGE_WRITE_BITS 3
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
diff --git a/include/configs/uc101.h b/include/configs/uc101.h
index c709033f49e..e8daae33b90 100644
--- a/include/configs/uc101.h
+++ b/include/configs/uc101.h
@@ -138,8 +138,6 @@
#define CFG_I2C_EEPROM_ADDR_LEN 1
#define CFG_EEPROM_PAGE_WRITE_BITS 4
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
-/* for LM81 */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
/*
* RTC configuration
diff --git a/include/configs/walnut.h b/include/configs/walnut.h
index 9676cd633ea..d3d079a8a1c 100644
--- a/include/configs/walnut.h
+++ b/include/configs/walnut.h
@@ -98,7 +98,6 @@
#define CFG_I2C_MULTI_EEPROMS
#define CFG_I2C_EEPROM_ADDR (0xa8>>1)
#define CFG_I2C_EEPROM_ADDR_LEN 1
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
#define CFG_EEPROM_PAGE_WRITE_BITS 3
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h
index afdce823799..06389f3804b 100644
--- a/include/configs/yosemite.h
+++ b/include/configs/yosemite.h
@@ -143,7 +143,6 @@
#define CFG_I2C_MULTI_EEPROMS
#define CFG_I2C_EEPROM_ADDR (0xa8>>1)
#define CFG_I2C_EEPROM_ADDR_LEN 1
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
#define CFG_EEPROM_PAGE_WRITE_BITS 3
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
diff --git a/include/configs/zeus.h b/include/configs/zeus.h
index d4270954d1b..abf6bd3023f 100644
--- a/include/configs/zeus.h
+++ b/include/configs/zeus.h
@@ -175,7 +175,6 @@
/* mask of address bits that overflow into the "EEPROM chip address" */
#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07
-#define CFG_EEPROM_PAGE_WRITE_ENABLE 1 /* write eeprom in pages */
#define CFG_EEPROM_PAGE_WRITE_BITS 3 /* 8 byte write page size */
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */