/* * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual * licensing only applies to this file, and not this project as a * whole. * * a) This file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following * conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ #include #include "rk3288.dtsi" / { memory { reg = <0x0 0x0 0x0 0x80000000>; device_type = "memory"; }; emmc_pwrseq: emmc-pwrseq { compatible = "mmc-pwrseq-emmc"; pinctrl-0 = <&emmc_reset>; pinctrl-names = "default"; reset-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>; }; ext_gmac: external-gmac-clock { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <125000000>; clock-output-names = "ext_gmac"; }; vcc_sys: vsys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; regulator-boot-on; }; }; &cpu0 { cpu0-supply = <&vdd_cpu>; }; &emmc { bus-width = <8>; cap-mmc-highspeed; disable-wp; non-removable; num-slots = <1>; mmc-pwrseq = <&emmc_pwrseq>; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; vmmc-supply = <&vcc_io>; status = "okay"; }; &gmac { assigned-clocks = <&cru SCLK_MAC>; assigned-clock-parents = <&ext_gmac>; clock_in_out = "input"; phy-mode = "rgmii"; phy-supply = <&vccio_pmu>; pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins &phy_rst>; snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; snps,reset-active-low; snps,reset-delays-us = <0 10000 30000>; rx_delay = <0x10>; tx_delay = <0x30>; }; &i2c0 { status = "okay"; act8846: act8846@5a { compatible = "active-semi,act8846"; reg = <0x5a>; system-power-controller; inl1-supply = <&vcc_io>; inl2-supply = <&vcc_sys>; inl3-supply = <&vcc_20>; vp1-supply = <&vcc_sys>; vp2-supply = <&vcc_sys>; vp3-supply = <&vcc_sys>; vp4-supply = <&vcc_sys>; regulators { vcc_ddr: REG1 { regulator-name = "VCC_DDR"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; }; vcc_io: REG2 { regulator-name = "VCC_IO"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; vdd_log: REG3 { regulator-name = "VDD_LOG"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; }; vcc_20: REG4 { regulator-name = "VCC_20"; regulator-min-microvolt = <2000000>; regulator-max-microvolt = <2000000>; regulator-always-on; }; vccio_sd: REG5 { regulator-name = "VCCIO_SD"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; vdd10_lcd: REG6 { regulator-name = "VDD10_LCD"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; }; vcca_codec: REG7 { regulator-name = "VCCA_CODEC"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; vcca_tp: REG8 { regulator-name = "VCCA_TP"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; vccio_pmu: REG9 { regulator-name = "VCCIO_PMU"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; vdd_10: REG10 { regulator-name = "VDD_10"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; }; vcc_18: REG11 { regulator-name = "VCC_18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; vcc18_lcd: REG12 { regulator-name = "VCC18_LCD"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; }; }; vdd_cpu: syr827@40 { compatible = "silergy,syr827"; reg = <0x40>; fcs,suspend-voltage-selector = <1>; regulator-always-on; regulator-boot-on; regulator-enable-ramp-delay = <300>; regulator-name = "vdd_cpu"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1350000>; regulator-ramp-delay = <8000>; vin-supply = <&vcc_sys>; }; vdd_gpu: syr828@41 { compatible = "silergy,syr828"; reg = <0x41>; fcs,suspend-voltage-selector = <1>; regulator-always-on; regulator-enable-ramp-delay = <300>; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1350000>; regulator-name = "vdd_gpu"; regulator-ramp-delay = <8000>; vin-supply = <&vcc_sys>; }; }; &pinctrl { pcfg_output_high: pcfg-output-high { output-high; }; emmc { emmc_reset: emmc-reset { rockchip,pins = <3 9 RK_FUNC_GPIO &pcfg_pull_none>; }; }; gmac { phy_rst: phy-rst { rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>; }; }; }; &tsadc { rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */ rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */ status = "okay"; }; &vopb { status = "okay"; }; &vopb_mmu { status = "okay"; }; &vopl { status = "okay"; }; &vopl_mmu { status = "okay"; }; &wdt { status = "okay"; };