diff options
| author | Julien Thierry | 2019-01-31 14:58:57 +0000 |
|---|---|---|
| committer | Catalin Marinas | 2019-02-06 10:05:21 +0000 |
| commit | d98d0a990ca1446d3c0ca8f0b9ac127a66e40cdf (patch) | |
| tree | 8192b29016e657d8473494f135e150c8370c779b /Documentation/arm64 | |
| parent | b334481ab76b2a9031aef5393b07de6d21a08244 (diff) | |
irqchip/gic-v3: Detect if GIC can support pseudo-NMIs
The values non secure EL1 needs to use for PMR and RPR registers depends on
the value of SCR_EL3.FIQ.
The values non secure EL1 sees from the distributor and redistributor
depend on whether security is enabled for the GIC or not.
To avoid having to deal with two sets of values for PMR
masking/unmasking, only enable pseudo-NMIs when GIC has non-secure view
of priorities.
Also, add firmware requirements related to SCR_EL3.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Diffstat (limited to 'Documentation/arm64')
| -rw-r--r-- | Documentation/arm64/booting.txt | 5 |
1 files changed, 5 insertions, 0 deletions
diff --git a/Documentation/arm64/booting.txt b/Documentation/arm64/booting.txt index 8df9f4658d6f..fbab7e21d116 100644 --- a/Documentation/arm64/booting.txt +++ b/Documentation/arm64/booting.txt @@ -188,6 +188,11 @@ Before jumping into the kernel, the following conditions must be met: the kernel image will be entered must be initialised by software at a higher exception level to prevent execution in an UNKNOWN state. + - SCR_EL3.FIQ must have the same value across all CPUs the kernel is + executing on. + - The value of SCR_EL3.FIQ must be the same as the one present at boot + time whenever the kernel is executing. + For systems with a GICv3 interrupt controller to be used in v3 mode: - If EL3 is present: ICC_SRE_EL3.Enable (bit 3) must be initialiased to 0b1. |