Merge tag 'usb-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt changes for 6.8-rc1.
  Included in here are the following:

   - Thunderbolt subsystem and driver updates for USB 4 hardware and
     issues reported by real devices

   - xhci driver updates

   - dwc3 driver updates

   - uvc_video gadget driver updates

   - typec driver updates

   - gadget string functions cleaned up

   - other small changes

  All of these have been in the linux-next tree for a while with no
  reported issues"

* tag 'usb-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits)
  usb: typec: tipd: fix use of device-specific init function
  usb: typec: tipd: Separate reset for TPS6598x
  usb: mon: Fix atomicity violation in mon_bin_vma_fault
  usb: gadget: uvc: Remove nested locking
  usb: gadget: uvc: Fix use are free during STREAMOFF
  usb: typec: class: fix typec_altmode_put_partner to put plugs
  dt-bindings: usb: dwc3: Limit num-hc-interrupters definition
  dt-bindings: usb: xhci: Add num-hc-interrupters definition
  xhci: add support to allocate several interrupters
  USB: core: Use device_driver directly in struct usb_driver and usb_device_driver
  arm64: dts: mediatek: mt8195: Add 'rx-fifo-depth' for cherry
  usb: xhci-mtk: fix a short packet issue of gen1 isoc-in transfer
  dt-bindings: usb: mtk-xhci: add a property for Gen1 isoc-in transfer issue
  arm64: dts: qcom: msm8996: Remove PNoC clock from MSS
  arm64: dts: qcom: msm8996: Remove AGGRE2 clock from SLPI
  arm64: dts: qcom: msm8998: Remove AGGRE2 clock from SLPI
  arm64: dts: qcom: msm8939: Drop RPM bus clocks
  arm64: dts: qcom: sdm630: Drop RPM bus clocks
  arm64: dts: qcom: qcs404: Drop RPM bus clocks
  arm64: dts: qcom: msm8996: Drop RPM bus clocks
  ...

11 files changed, 320 insertions, 118 deletions

diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
index 7c8a3e8430d3..fb216ce68bb3 100644
--- a/Documentation/devicetree/bindings/connector/usb-connector.yaml
+++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
@@ -66,7 +66,6 @@ properties:
       Particularly, if use an output GPIO to control a VBUS regulator, should
       model it as a regulator. See bindings/regulator/fixed-regulator.yaml
 
-  # The following are optional properties for "usb-c-connector".
   power-role:
     description: Determines the power role that the Type C connector will
       support. "dual" refers to Dual Role Port (DRP).
@@ -119,30 +118,6 @@ properties:
 
   # The following are optional properties for "usb-c-connector" with power
   # delivery support.
-  source-pdos:
-    description: An array of u32 with each entry providing supported power
-      source data object(PDO), the detailed bit definitions of PDO can be found
-      in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.2
-      Source_Capabilities Message, the order of each entry(PDO) should follow
-      the PD spec chapter 6.4.1. Required for power source and power dual role.
-      User can specify the source PDO array via PDO_FIXED/BATT/VAR/PPS_APDO()
-      defined in dt-bindings/usb/pd.h.
-    minItems: 1
-    maxItems: 7
-    $ref: /schemas/types.yaml#/definitions/uint32-array
-
-  sink-pdos:
-    description: An array of u32 with each entry providing supported power sink
-      data object(PDO), the detailed bit definitions of PDO can be found in
-      "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.3
-      Sink Capabilities Message, the order of each entry(PDO) should follow the
-      PD spec chapter 6.4.1. Required for power sink and power dual role. User
-      can specify the sink PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() defined
-      in dt-bindings/usb/pd.h.
-    minItems: 1
-    maxItems: 7
-    $ref: /schemas/types.yaml#/definitions/uint32-array
-
   sink-vdos:
     description: An array of u32 with each entry, a Vendor Defined Message Object (VDO),
       providing additional information corresponding to the product, the detailed bit
@@ -166,10 +141,43 @@ properties:
     maxItems: 6
     $ref: /schemas/types.yaml#/definitions/uint32-array
 
-  op-sink-microwatt:
-    description: Sink required operating power in microwatt, if source can't
-      offer the power, Capability Mismatch is set. Required for power sink and
-      power dual role.
+  accessory-mode-audio:
+    type: boolean
+    description: Whether the device supports Audio Adapter Accessory Mode. This
+      is only necessary if there are no other means to discover supported
+      alternative modes (e.g. through the UCSI firmware interface).
+
+  accessory-mode-debug:
+    type: boolean
+    description: Whether the device supports Debug Accessory Mode. This
+      is only necessary if there are no other means to discover supported
+      alternative modes (e.g. through the UCSI firmware interface).
+
+  altmodes:
+    type: object
+    description: List of Alternative Modes supported by the schematics on the
+      particular device. This is only necessary if there are no other means to
+      discover supported alternative modes (e.g. through the UCSI firmware
+      interface).
+
+    additionalProperties: false
+
+    patternProperties:
+      "^(displayport)$":
+        type: object
+        description:
+          A single USB-C Alternative Mode as supported by the USB-C connector logic.
+
+        additionalProperties: false
+
+        properties:
+          svid:
+            $ref: /schemas/types.yaml#/definitions/uint16
+            description: Unique value assigned by USB-IF to the Vendor / AltMode.
+            enum: [ 0xff01 ]
+          vdo:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: VDO returned by Discover Modes USB PD command.
 
   port:
     $ref: /schemas/graph.yaml#/properties/port
@@ -231,6 +239,20 @@ properties:
       SNK_READY for non-pd link.
     type: boolean
 
+  capabilities:
+    description: A child node to contain all the selectable USB Power Delivery capabilities.
+    type: object
+
+    patternProperties:
+      "^caps-[0-9]+$":
+        description: Child nodes under "capabilities" node. Each node contains a selectable USB
+          Power Delivery capability.
+        type: object
+        $ref: "#/$defs/capabilities"
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
 dependencies:
   sink-vdos-v1: [ sink-vdos ]
   sink-vdos: [ sink-vdos-v1 ]
@@ -238,7 +260,42 @@ dependencies:
 required:
   - compatible
 
+$defs:
+  capabilities:
+    type: object
+
+    properties:
+      source-pdos:
+        description: An array of u32 with each entry providing supported power
+          source data object(PDO), the detailed bit definitions of PDO can be found
+          in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.2
+          Source_Capabilities Message, the order of each entry(PDO) should follow
+          the PD spec chapter 6.4.1. Required for power source and power dual role.
+          User can specify the source PDO array via PDO_FIXED/BATT/VAR/PPS_APDO()
+          defined in dt-bindings/usb/pd.h.
+        minItems: 1
+        maxItems: 7
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+
+      sink-pdos:
+        description: An array of u32 with each entry providing supported power sink
+          data object(PDO), the detailed bit definitions of PDO can be found in
+          "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.3
+          Sink Capabilities Message, the order of each entry(PDO) should follow the
+          PD spec chapter 6.4.1. Required for power sink and power dual role. User
+          can specify the sink PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() defined
+          in dt-bindings/usb/pd.h.
+        minItems: 1
+        maxItems: 7
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+
+      op-sink-microwatt:
+        description: Sink required operating power in microwatt, if source can't
+          offer the power, Capability Mismatch is set. Required for power sink and
+          power dual role.
+
 allOf:
+  - $ref: "#/$defs/capabilities"
   - if:
       properties:
         compatible:
@@ -267,7 +324,7 @@ anyOf:
         - typec-power-opmode
         - new-source-frs-typec-current
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   # Micro-USB connector with HS lines routed via controller (MUIC).
@@ -289,6 +346,13 @@ examples:
             compatible = "usb-c-connector";
             label = "USB-C";
 
+            altmodes {
+                displayport {
+                    svid = /bits/ 16 <0xff01>;
+                    vdo = <0x00001c46>;
+                };
+            };
+
             ports {
                 #address-cells = <1>;
                 #size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/usb/generic-xhci.yaml b/Documentation/devicetree/bindings/usb/generic-xhci.yaml
index 594ebb3ee432..6ceafa4af292 100644
--- a/Documentation/devicetree/bindings/usb/generic-xhci.yaml
+++ b/Documentation/devicetree/bindings/usb/generic-xhci.yaml
@@ -9,9 +9,6 @@ title: USB xHCI Controller
 maintainers:
   - Mathias Nyman <mathias.nyman@intel.com>
 
-allOf:
-  - $ref: usb-xhci.yaml#
-
 properties:
   compatible:
     oneOf:
@@ -25,6 +22,11 @@ properties:
               - marvell,armada-380-xhci
               - marvell,armada-8k-xhci
           - const: generic-xhci
+      - description: Broadcom SoCs with power domains
+        items:
+          - enum:
+              - brcm,bcm2711-xhci
+          - const: brcm,xhci-brcm-v2
       - description: Broadcom STB SoCs with xHCI
         enum:
           - brcm,xhci-brcm-v2
@@ -49,6 +51,9 @@ properties:
       - const: core
       - const: reg
 
+  power-domains:
+    maxItems: 1
+
 unevaluatedProperties: false
 
 required:
@@ -56,6 +61,20 @@ required:
   - reg
   - interrupts
 
+allOf:
+  - $ref: usb-xhci.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm2711-xhci
+    then:
+      required:
+        - power-domains
+    else:
+      properties:
+        power-domains: false
+
 examples:
   - |
     usb@f0931000 {
diff --git a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
index ee08b9c3721f..37cf5249e526 100644
--- a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
+++ b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
@@ -29,6 +29,11 @@ properties:
     description:
       the regulator that provides 3.3V core power to the hub.
 
+  peer-hub:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the peer hub on the controller.
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
index e9644e333d78..924fd3d748a8 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
@@ -124,6 +124,17 @@ properties:
       defined in the xHCI spec on MTK's controller.
     default: 5000
 
+  rx-fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      It is a quirk used to work around Gen1 isoc-in endpoint transfer issue
+      that still send out unexpected ACK after device finishes the burst
+      transfer with a short packet and cause an exception, specially on a 4K
+      camera device, it happens on controller before about IPM v1.6.0;
+      the side-effect is that it may cause performance drop about 10%,
+      including bulk transfer, prefer to use 3k here. The size is in bytes.
+    enum: [1024, 2048, 3072, 4096]
+
   # the following properties are only used for case 1
   wakeup-source:
     description: enable USB remote wakeup, see power/wakeup-source.txt
diff --git a/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml b/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml
index 28eb25ecba74..eaedb4cc6b6c 100644
--- a/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml
+++ b/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/usb/nxp,ptn5110.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NXP PTN5110 Typec Port Cotroller
+title: NXP PTN5110 Type-C Port Controller
 
 maintainers:
   - Li Jun <jun.li@nxp.com>
diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
index 915c8205623b..63d150b216c5 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
@@ -46,6 +46,8 @@ properties:
           - qcom,sm8350-dwc3
           - qcom,sm8450-dwc3
           - qcom,sm8550-dwc3
+          - qcom,sm8650-dwc3
+          - qcom,x1e80100-dwc3
       - const: qcom,dwc3
 
   reg:
@@ -97,12 +99,29 @@ properties:
       - const: apps-usb
 
   interrupts:
-    minItems: 1
-    maxItems: 4
+    description: |
+      Different types of interrupts are used based on HS PHY used on target:
+        - pwr_event: Used for wakeup based on other power events.
+        - hs_phY_irq: Apart from DP/DM/QUSB2 PHY interrupts, there is
+                       hs_phy_irq which is not triggered by default and its
+                       functionality is mutually exclusive to that of
+                       {dp/dm}_hs_phy_irq and qusb2_phy_irq.
+        - qusb2_phy: SoCs with QUSB2 PHY do not have separate DP/DM IRQs and
+                      expose only a single IRQ whose behavior can be modified
+                      by the QUSB2PHY_INTR_CTRL register. The required DPSE/
+                      DMSE configuration is done in QUSB2PHY_INTR_CTRL register
+                      of PHY address space.
+        - {dp/dm}_hs_phy_irq: These IRQ's directly reflect changes on the DP/
+                               DM pads of the SoC. These are used for wakeup
+                               only on SoCs with non-QUSB2 targets with
+                               exception of SDM670/SDM845/SM6350.
+        - ss_phy_irq: Used for remote wakeup in Super Speed mode of operation.
+    minItems: 2
+    maxItems: 5
 
   interrupt-names:
-    minItems: 1
-    maxItems: 4
+    minItems: 2
+    maxItems: 5
 
   qcom,select-utmi-as-pipe-clk:
     description:
@@ -263,6 +282,7 @@ allOf:
           contains:
             enum:
               - qcom,sc8280xp-dwc3
+              - qcom,x1e80100-dwc3
     then:
       properties:
         clocks:
@@ -288,8 +308,8 @@ allOf:
     then:
       properties:
         clocks:
-          minItems: 5
-          maxItems: 6
+          minItems: 4
+          maxItems: 5
         clock-names:
           oneOf:
             - items:
@@ -298,13 +318,11 @@ allOf:
                 - const: iface
                 - const: sleep
                 - const: mock_utmi
-                - const: bus
             - items:
                 - const: cfg_noc
                 - const: core
                 - const: sleep
                 - const: mock_utmi
-                - const: bus
 
   - if:
       properties:
@@ -318,6 +336,7 @@ allOf:
               - qcom,sm8250-dwc3
               - qcom,sm8450-dwc3
               - qcom,sm8550-dwc3
+              - qcom,sm8650-dwc3
     then:
       properties:
         clocks:
@@ -357,59 +376,20 @@ allOf:
         compatible:
           contains:
             enum:
-              - qcom,ipq4019-dwc3
+              - qcom,ipq5018-dwc3
               - qcom,ipq6018-dwc3
-              - qcom,ipq8064-dwc3
               - qcom,ipq8074-dwc3
-              - qcom,msm8994-dwc3
-              - qcom,qcs404-dwc3
-              - qcom,sc7180-dwc3
-              - qcom,sdm670-dwc3
-              - qcom,sdm845-dwc3
-              - qcom,sdx55-dwc3
-              - qcom,sdx65-dwc3
-              - qcom,sdx75-dwc3
-              - qcom,sm4250-dwc3
-              - qcom,sm6125-dwc3
-              - qcom,sm6350-dwc3
-              - qcom,sm8150-dwc3
-              - qcom,sm8250-dwc3
-              - qcom,sm8350-dwc3
-              - qcom,sm8450-dwc3
-              - qcom,sm8550-dwc3
-    then:
-      properties:
-        interrupts:
-          items:
-            - description: The interrupt that is asserted
-                when a wakeup event is received on USB2 bus.
-            - description: The interrupt that is asserted
-                when a wakeup event is received on USB3 bus.
-            - description: Wakeup event on DM line.
-            - description: Wakeup event on DP line.
-        interrupt-names:
-          items:
-            - const: hs_phy_irq
-            - const: ss_phy_irq
-            - const: dm_hs_phy_irq
-            - const: dp_hs_phy_irq
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
               - qcom,msm8953-dwc3
-              - qcom,msm8996-dwc3
               - qcom,msm8998-dwc3
-              - qcom,sm6115-dwc3
     then:
       properties:
         interrupts:
-          maxItems: 2
+          minItems: 2
+          maxItems: 3
         interrupt-names:
           items:
-            - const: hs_phy_irq
+            - const: pwr_event
+            - const: qusb2_phy
             - const: ss_phy_irq
 
   - if:
@@ -417,37 +397,21 @@ allOf:
         compatible:
           contains:
             enum:
-              - qcom,ipq5018-dwc3
-              - qcom,ipq5332-dwc3
+              - qcom,msm8996-dwc3
+              - qcom,qcs404-dwc3
               - qcom,sdm660-dwc3
-    then:
-      properties:
-        interrupts:
-          minItems: 1
-          maxItems: 2
-        interrupt-names:
-          minItems: 1
-          items:
-            - const: hs_phy_irq
-            - const: ss_phy_irq
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,sc7280-dwc3
+              - qcom,sm6115-dwc3
+              - qcom,sm6125-dwc3
     then:
       properties:
         interrupts:
           minItems: 3
           maxItems: 4
         interrupt-names:
-          minItems: 3
           items:
+            - const: pwr_event
+            - const: qusb2_phy
             - const: hs_phy_irq
-            - const: dp_hs_phy_irq
-            - const: dm_hs_phy_irq
             - const: ss_phy_irq
 
   - if:
@@ -455,7 +419,8 @@ allOf:
         compatible:
           contains:
             enum:
-              - qcom,sc8280xp-dwc3
+              - qcom,ipq5332-dwc3
+              - qcom,x1e80100-dwc3
     then:
       properties:
         interrupts:
@@ -472,16 +437,35 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,ipq4019-dwc3
+              - qcom,ipq8064-dwc3
+              - qcom,msm8994-dwc3
               - qcom,sa8775p-dwc3
+              - qcom,sc7180-dwc3
+              - qcom,sc7280-dwc3
+              - qcom,sc8280xp-dwc3
+              - qcom,sdm670-dwc3
+              - qcom,sdm845-dwc3
+              - qcom,sdx55-dwc3
+              - qcom,sdx65-dwc3
+              - qcom,sdx75-dwc3
+              - qcom,sm4250-dwc3
+              - qcom,sm6350-dwc3
+              - qcom,sm8150-dwc3
+              - qcom,sm8250-dwc3
+              - qcom,sm8350-dwc3
+              - qcom,sm8450-dwc3
+              - qcom,sm8550-dwc3
+              - qcom,sm8650-dwc3
     then:
       properties:
         interrupts:
-          minItems: 3
-          maxItems: 4
+          minItems: 4
+          maxItems: 5
         interrupt-names:
-          minItems: 3
           items:
             - const: pwr_event
+            - const: hs_phy_irq
             - const: dp_hs_phy_irq
             - const: dm_hs_phy_irq
             - const: ss_phy_irq
@@ -519,12 +503,13 @@ examples:
                           <&gcc GCC_USB30_PRIM_MASTER_CLK>;
             assigned-clock-rates = <19200000>, <150000000>;
 
-            interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
+            interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 489 IRQ_TYPE_EDGE_BOTH>,
                          <GIC_SPI 488 IRQ_TYPE_EDGE_BOTH>,
-                         <GIC_SPI 489 IRQ_TYPE_EDGE_BOTH>;
-            interrupt-names = "hs_phy_irq", "ss_phy_irq",
-                          "dm_hs_phy_irq", "dp_hs_phy_irq";
+                         <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "pwr_event", "hs_phy_irq",
+                          "dp_hs_phy_irq", "dm_hs_phy_irq", "ss_phy_irq";
 
             power-domains = <&gcc USB30_PRIM_GDSC>;
 
diff --git a/Documentation/devicetree/bindings/usb/qcom,wcd939x-usbss.yaml b/Documentation/devicetree/bindings/usb/qcom,wcd939x-usbss.yaml
new file mode 100644
index 000000000000..7ddfd3313a18
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/qcom,wcd939x-usbss.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/qcom,wcd939x-usbss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm WCD9380/WCD9385 USB SubSystem Altmode/Analog Audio Switch
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description:
+  Qualcomm WCD9390/WCD9395 is a standalone Hi-Fi audio codec IC with a
+  functionally separate USB SubSystem for Altmode/Analog Audio Switch
+  accessible over an I2C interface.
+  The Audio Headphone and Microphone data path between the Codec and the
+  USB-C Mux subsystems are external to the IC, thus requiring DT port-endpoint
+  graph description to handle USB-C altmode & orientation switching for Audio
+  Accessory Mode.
+
+properties:
+  compatible:
+    oneOf:
+      - const: qcom,wcd9390-usbss
+      - items:
+          - const: qcom,wcd9395-usbss
+          - const: qcom,wcd9390-usbss
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  vdd-supply:
+    description: USBSS VDD power supply
+
+  mode-switch:
+    description: Flag the port as possible handle of altmode switching
+    type: boolean
+
+  orientation-switch:
+    description: Flag the port as possible handler of orientation switching
+    type: boolean
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          A port node to link the WCD939x USB SubSystem to a TypeC controller for the
+          purpose of handling altmode muxing and orientation switching.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          A port node to link the WCD939x USB SubSystem to the Codec SubSystem for the
+          purpose of handling USB-C Audio Accessory Mode muxing and orientation switching.
+
+required:
+  - compatible
+  - reg
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        typec-mux@42 {
+            compatible = "qcom,wcd9390-usbss";
+            reg = <0x42>;
+
+            vdd-supply = <&vreg_bob>;
+
+            mode-switch;
+            orientation-switch;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    wcd9390_usbss_sbu: endpoint {
+                        remote-endpoint = <&typec_sbu>;
+                    };
+                };
+                port@1 {
+                    reg = <1>;
+                    wcd9390_usbss_codec: endpoint {
+                        remote-endpoint = <&wcd9390_codec_usbss>;
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
index bad55dfb2fa0..40ada78f2328 100644
--- a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
+++ b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
@@ -19,7 +19,7 @@ properties:
       - items:
           - enum:
               - renesas,usbhs-r7s9210   # RZ/A2
-              - renesas,usbhs-r9a07g043 # RZ/G2UL
+              - renesas,usbhs-r9a07g043 # RZ/G2UL and RZ/Five
               - renesas,usbhs-r9a07g044 # RZ/G2{L,LC}
               - renesas,usbhs-r9a07g054 # RZ/V2L
           - const: renesas,rza2-usbhs
diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
index ee5af4b381b1..203a1eb66691 100644
--- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
@@ -432,6 +432,10 @@ properties:
     items:
       enum: [1, 4, 8, 16, 32, 64, 128, 256]
 
+  num-hc-interrupters:
+    maximum: 8
+    default: 1
+
   port:
     $ref: /schemas/graph.yaml#/properties/port
     description:
diff --git a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml
index 323d664ae06a..1745e28b3110 100644
--- a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml
+++ b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml
@@ -38,6 +38,10 @@ properties:
       - const: main
       - const: patch-address
 
+  reset-gpios:
+    description: GPIO used for the HRESET pin.
+    maxItems: 1
+
   wakeup-source: true
 
   interrupts:
@@ -90,6 +94,7 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
     i2c {
         #address-cells = <1>;
@@ -106,6 +111,7 @@ examples:
 
             pinctrl-names = "default";
             pinctrl-0 = <&typec_pins>;
+            reset-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
 
             typec_con: connector {
                 compatible = "usb-c-connector";
diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.yaml b/Documentation/devicetree/bindings/usb/usb-xhci.yaml
index 180a261c3e8f..4238ae896ef6 100644
--- a/Documentation/devicetree/bindings/usb/usb-xhci.yaml
+++ b/Documentation/devicetree/bindings/usb/usb-xhci.yaml
@@ -29,6 +29,12 @@ properties:
     description: Interrupt moderation interval
     default: 5000
 
+  num-hc-interrupters:
+    description: Maximum number of interrupters to allocate
+    $ref: /schemas/types.yaml#/definitions/uint16
+    minimum: 1
+    maximum: 1024
+
 additionalProperties: true
 
 examples: