diff options
| author | Linus Torvalds | 2022-05-26 10:32:47 -0700 |
|---|---|---|
| committer | Linus Torvalds | 2022-05-26 10:32:47 -0700 |
| commit | cc3c470ae4ad758b8ddad825ab199f7eaa8b0a9e (patch) | |
| tree | 779e3dc27a1f4d1468bad2ea5cbfca28c64cf1cd /Documentation | |
| parent | ae862183285cbb2ef9032770d98ffa9becffe9d5 (diff) | |
| parent | d4a3b442335b0a9476248c5d6dc07f6f8580a9ca (diff) | |
Merge tag 'arm-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"There are minor updates to SoC specific drivers for chips by Rockchip,
Samsung, NVIDIA, TI, NXP, i.MX, Qualcomm, and Broadcom.
Noteworthy driver changes include:
- Several conversions of DT bindings to yaml format.
- Renesas adds driver support for R-Car V4H, RZ/V2M and RZ/G2UL SoCs.
- Qualcomm adds a bus driver for the SSC (Snapdragon Sensor Core),
and support for more chips in the RPMh power domains and the
soc-id.
- NXP has a new driver for the HDMI blk-ctrl on i.MX8MP.
- Apple M1 gains support for the on-chip NVMe controller, making it
possible to finally use the internal disks. This also includes SoC
drivers for their RTKit IPC and for the SART DMA address filter.
For other subsystems that merge their drivers through the SoC tree, we
have
- Firmware drivers for the ARM firmware stack including TEE, OP-TEE,
SCMI and FF-A get a number of smaller updates and cleanups. OP-TEE
now has a cache for firmware argument structures as an
optimization, and SCMI now supports the 3.1 version of the
specification.
- Reset controller updates to Amlogic, ASpeed, Renesas and ACPI
drivers
- Memory controller updates for Tegra, and a few updates for other
platforms"
* tag 'arm-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (159 commits)
memory: tegra: Add MC error logging on Tegra186 onward
memory: tegra: Add memory controller channels support
memory: tegra: Add APE memory clients for Tegra234
memory: tegra: Add Tegra234 support
nvme-apple: fix sparse endianess warnings
soc/tegra: pmc: Document core domain fields
soc: qcom: pdr: use static for servreg_* variables
soc: imx: fix semicolon.cocci warnings
soc: renesas: R-Car V3U is R-Car Gen4
soc: imx: add i.MX8MP HDMI blk-ctrl
soc: imx: imx8m-blk-ctrl: Add i.MX8MP media blk-ctrl
soc: imx: add i.MX8MP HSIO blk-ctrl
soc: imx: imx8m-blk-ctrl: set power device name
soc: qcom: llcc: Add sc8180x and sc8280xp configurations
dt-bindings: arm: msm: Add sc8180x and sc8280xp LLCC compatibles
soc/tegra: pmc: Select REGMAP
dt-bindings: reset: st,sti-powerdown: Convert to yaml
dt-bindings: reset: st,sti-picophyreset: Convert to yaml
dt-bindings: reset: socfpga: Convert to yaml
dt-bindings: reset: snps,axs10x-reset: Convert to yaml
...
Diffstat (limited to 'Documentation')
49 files changed, 1725 insertions, 916 deletions
diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml index 30fcbe2ad8a3..5ea506412b4e 100644 --- a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml +++ b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml @@ -23,6 +23,8 @@ properties: enum: - qcom,sc7180-llcc - qcom,sc7280-llcc + - qcom,sc8180x-llcc + - qcom,sc8280xp-llcc - qcom,sdm845-llcc - qcom,sm6350-llcc - qcom,sm8150-llcc diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 7f89ab344d3f..5c06d1bfc046 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -39,8 +39,11 @@ description: | msm8994 msm8996 sa8155p + sa8540p sc7180 sc7280 + sc8180x + sc8280xp sdm630 sdm632 sdm660 @@ -228,6 +231,18 @@ properties: - items: - enum: + - lenovo,flex-5g + - microsoft,surface-prox + - qcom,sc8180x-primus + - const: qcom,sc8180x + + - items: + - enum: + - qcom,sc8280xp-qrd + - const: qcom,sc8280xp + + - items: + - enum: - fairphone,fp3 - const: qcom,sdm632 @@ -261,6 +276,11 @@ properties: - items: - enum: + - qcom,sa8295p-adp + - const: qcom,sa8540p + + - items: + - enum: - fairphone,fp4 - const: qcom,sm7225 diff --git a/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml b/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml new file mode 100644 index 000000000000..5b9705079015 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml @@ -0,0 +1,147 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/qcom,ssc-block-bus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: The AHB Bus Providing a Global View of the SSC Block on (some) qcom SoCs + +maintainers: + - Michael Srba <Michael.Srba@seznam.cz> + +description: | + This binding describes the dependencies (clocks, resets, power domains) which + need to be turned on in a sequence before communication over the AHB bus + becomes possible. + + Additionally, the reg property is used to pass to the driver the location of + two sadly undocumented registers which need to be poked as part of the sequence. + + The SSC (Snapdragon Sensor Core) block contains a gpio controller, i2c/spi/uart + controllers, a hexagon core, and a clock controller which provides clocks for + the above. + +properties: + compatible: + items: + - const: qcom,msm8998-ssc-block-bus + - const: qcom,ssc-block-bus + + reg: + description: | + Shall contain the addresses of the SSCAON_CONFIG0 and SSCAON_CONFIG1 + registers + minItems: 2 + maxItems: 2 + + reg-names: + items: + - const: mpm_sscaon_config0 + - const: mpm_sscaon_config1 + + '#address-cells': + enum: [ 1, 2 ] + + '#size-cells': + enum: [ 1, 2 ] + + ranges: true + + clocks: + minItems: 6 + maxItems: 6 + + clock-names: + items: + - const: xo + - const: aggre2 + - const: gcc_im_sleep + - const: aggre2_north + - const: ssc_xo + - const: ssc_ahbs + + power-domains: + description: Power domain phandles for the ssc_cx and ssc_mx power domains + minItems: 2 + maxItems: 2 + + power-domain-names: + items: + - const: ssc_cx + - const: ssc_mx + + resets: + description: | + Reset phandles for the ssc_reset and ssc_bcr resets (note: ssc_bcr is the + branch control register associated with the ssc_xo and ssc_ahbs clocks) + minItems: 2 + maxItems: 2 + + reset-names: + items: + - const: ssc_reset + - const: ssc_bcr + + qcom,halt-regs: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: describes how to locate the ssc AXI halt register + items: + - items: + - description: Phandle reference to a syscon representing TCSR + - description: offset for the ssc AXI halt register + +required: + - compatible + - reg + - reg-names + - '#address-cells' + - '#size-cells' + - ranges + - clocks + - clock-names + - power-domains + - power-domain-names + - resets + - reset-names + - qcom,halt-regs + +additionalProperties: + type: object + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8998.h> + #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + soc { + #address-cells = <1>; + #size-cells = <1>; + + // devices under this node are physically located in the SSC block, connected to an ssc-internal bus; + ssc_ahb_slave: bus@10ac008 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + compatible = "qcom,msm8998-ssc-block-bus", "qcom,ssc-block-bus"; + reg = <0x10ac008 0x4>, <0x10ac010 0x4>; + reg-names = "mpm_sscaon_config0", "mpm_sscaon_config1"; + + clocks = <&xo>, + <&rpmcc RPM_SMD_AGGR2_NOC_CLK>, + <&gcc GCC_IM_SLEEP>, + <&gcc AGGRE2_SNOC_NORTH_AXI>, + <&gcc SSC_XO>, + <&gcc SSC_CNOC_AHBS_CLK>; + clock-names = "xo", "aggre2", "gcc_im_sleep", "aggre2_north", "ssc_xo", "ssc_ahbs"; + + resets = <&gcc GCC_SSC_RESET>, <&gcc GCC_SSC_BCR>; + reset-names = "ssc_reset", "ssc_bcr"; + + power-domains = <&rpmpd MSM8998_SSCCX>, <&rpmpd MSM8998_SSCMX>; + power-domain-names = "ssc_cx", "ssc_mx"; + + qcom,halt-regs = <&tcsr_mutex_regs 0x26000>; + }; + }; diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/Documentation/devicetree/bindings/firmware/qcom,scm.txt index b1cd4ad1889a..0f4e5ab26477 100644 --- a/Documentation/devicetree/bindings/firmware/qcom,scm.txt +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.txt @@ -19,6 +19,7 @@ Required properties: * "qcom,scm-msm8953" * "qcom,scm-msm8960" * "qcom,scm-msm8974" + * "qcom,scm-msm8976" * "qcom,scm-msm8994" * "qcom,scm-msm8996" * "qcom,scm-msm8998" @@ -37,7 +38,7 @@ Required properties: * core clock required for "qcom,scm-apq8064", "qcom,scm-msm8660" and "qcom,scm-msm8960" * core, iface and bus clocks required for "qcom,scm-apq8084", - "qcom,scm-msm8916", "qcom,scm-msm8953" and "qcom,scm-msm8974" + "qcom,scm-msm8916", "qcom,scm-msm8953", "qcom,scm-msm8974" and "qcom,scm-msm8976" - clock-names: Must contain "core" for the core clock, "iface" for the interface clock and "bus" for the bus clock per the requirements of the compatible. - qcom,dload-mode: phandle to the TCSR hardware block and offset of the diff --git a/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml b/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml index e23df4836c6f..eec987640b37 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml @@ -45,20 +45,20 @@ additionalProperties: false examples: # Example 1: apps bcm_voter on SDM845 SoC should be defined inside &apps_rsc node - # as defined in Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt + # as defined in Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml - | - apps_bcm_voter: bcm_voter { + apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; }; # Example 2: disp bcm_voter on SDM845 should be defined inside &disp_rsc node - # as defined in Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt + # as defined in Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml - | #include <dt-bindings/interconnect/qcom,icc.h> - disp_bcm_voter: bcm_voter { + disp_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; qcom,tcs-wait = <QCOM_ICC_TAG_AMC>; }; diff --git a/Documentation/devicetree/bindings/iommu/apple,sart.yaml b/Documentation/devicetree/bindings/iommu/apple,sart.yaml new file mode 100644 index 000000000000..1524fa3094ef --- /dev/null +++ b/Documentation/devicetree/bindings/iommu/apple,sart.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iommu/apple,sart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple SART DMA address filter + +maintainers: + - Sven Peter <sven@svenpeter.dev> + +description: + Apple SART is a simple address filter for DMA transactions. Regions of + physical memory must be added to the SART's allow list before any + DMA can target these. Unlike a proper IOMMU no remapping can be done and + special support in the consumer driver is required since not all DMA + transactions of a single device are subject to SART filtering. + + SART1 has first been used since at least the A11 (iPhone 8 and iPhone X) + and allows 36 bit of physical address space and filter entries with sizes + up to 24 bit. + + SART2, first seen in A14 and M1, allows 36 bit of physical address space + and filter entry size up to 36 bit. + + SART3, first seen in M1 Pro/Max, extends both the address space and filter + entry size to 42 bit. + +properties: + compatible: + enum: + - apple,t6000-sart + - apple,t8103-sart + + reg: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + iommu@7bc50000 { + compatible = "apple,t8103-sart"; + reg = <0x7bc50000 0x4000>; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml b/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml index 6744d17f1efd..645249ea21d1 100644 --- a/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml @@ -31,8 +31,13 @@ properties: - renesas,r8a774b1-rpc-if # RZ/G2N - renesas,r8a774c0-rpc-if # RZ/G2E - renesas,r8a774e1-rpc-if # RZ/G2H + - renesas,r8a7795-rpc-if # R-Car H3 + - renesas,r8a7796-rpc-if # R-Car M3-W + - renesas,r8a77961-rpc-if # R-Car M3-W+ + - renesas,r8a77965-rpc-if # R-Car M3-N - renesas,r8a77970-rpc-if # R-Car V3M - renesas,r8a77980-rpc-if # R-Car V3H + - renesas,r8a77990-rpc-if # R-Car E3 - renesas,r8a77995-rpc-if # R-Car D3 - renesas,r8a779a0-rpc-if # R-Car V3U - const: renesas,rcar-gen3-rpc-if # a generic R-Car gen3 or RZ/G2{E,H,M,N} device diff --git a/Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml b/Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml new file mode 100644 index 000000000000..ddff9233b159 --- /dev/null +++ b/Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml @@ -0,0 +1,111 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvme/apple,nvme-ans.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple ANS NVM Express host controller + +maintainers: + - Sven Peter <sven@svenpeter.dev> + +properties: + compatible: + items: + - enum: + - apple,t8103-nvme-ans2 + - apple,t6000-nvme-ans2 + - const: apple,nvme-ans2 + + reg: + items: + - description: NVMe and NVMMU registers + - description: ANS2 co-processor control registers + + reg-names: + items: + - const: nvme + - const: ans + + resets: + maxItems: 1 + + power-domains: + # two domains for t8103, three for t6000 + minItems: 2 + items: + - description: power domain for the NVMe controller. + - description: power domain for the first PCIe bus connecting the NVMe + controller to the storage modules. + - description: optional power domain for the second PCIe bus + connecting the NVMe controller to the storage modules. + + power-domain-names: + minItems: 2 + items: + - const: ans + - const: apcie0 + - const: apcie1 + + mboxes: + maxItems: 1 + description: Mailbox of the ANS2 co-processor + + interrupts: + maxItems: 1 + + apple,sart: + maxItems: 1 + $ref: /schemas/types.yaml#/definitions/phandle + description: | + Reference to the SART address filter. + + The SART address filter is documented in iommu/apple,sart.yaml. + +if: + properties: + compatible: + contains: + const: apple,t8103-nvme-ans2 +then: + properties: + power-domains: + maxItems: 2 + power-domain-names: + maxItems: 2 +else: + properties: + power-domains: + minItems: 3 + power-domain-names: + minItems: 3 + +required: + - compatible + - reg + - reg-names + - resets + - power-domains + - power-domain-names + - mboxes + - interrupts + - apple,sart + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/apple-aic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + nvme@7bcc0000 { + compatible = "apple,t8103-nvme-ans2", "apple,nvme-ans2"; + reg = <0x7bcc0000 0x40000>, <0x77400000 0x4000>; + reg-names = "nvme", "ans"; + interrupts = <AIC_IRQ 590 IRQ_TYPE_LEVEL_HIGH>; + mboxes = <&ans>; + apple,sart = <&sart>; + power-domains = <&ps_ans2>, <&ps_apcie_st>; + power-domain-names = "ans", "apcie0"; + resets = <&ps_ans2>; + }; diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml index 940e97b565bf..ad77a6380f38 100644 --- a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml +++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml @@ -27,12 +27,15 @@ properties: - qcom,msm8998-rpmpd - qcom,qcm2290-rpmpd - qcom,qcs404-rpmpd + - qcom,sa8540p-rpmhpd - qcom,sdm660-rpmpd - qcom,sc7180-rpmhpd - qcom,sc7280-rpmhpd - qcom,sc8180x-rpmhpd + - qcom,sc8280xp-rpmhpd - qcom,sdm845-rpmhpd - qcom,sdx55-rpmhpd + - qcom,sdx65-rpmhpd - qcom,sm6115-rpmpd - qcom,sm6125-rpmpd - qcom,sm6350-rpmhpd diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml index f052e03be402..6a9a7eed466f 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml @@ -12,7 +12,7 @@ description: resides as a subnode of the SMD. As such, the SMD-RPM regulator requires that the SMD and RPM nodes be present. - Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt for + Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml for information pertaining to the SMD node. Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml @@ -69,7 +69,8 @@ description: l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22 maintainers: - - Kathiravan T <kathirav@codeaurora.org> + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt index 8f1507052afd..b677900b3aae 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt +++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt @@ -250,7 +250,7 @@ the memory regions used by the Hexagon firmware. Each sub-node must contain: The Hexagon node may also have an subnode named either "smd-edge" or "glink-edge" that describes the communication edge, channels and devices -related to the Hexagon. See ../soc/qcom/qcom,smd.txt and +related to the Hexagon. See ../soc/qcom/qcom,smd.yaml and ../soc/qcom/qcom,glink.txt for details on how to describe these. = EXAMPLE diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt index a83080b8905c..ac423f4c3f1b 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt +++ b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt @@ -111,7 +111,7 @@ and its resource dependencies. It is described by the following properties: The wcnss node can also have an subnode named "smd-edge" that describes the SMD edge, channels and devices related to the WCNSS. -See ../soc/qcom/qcom,smd.txt for details on how to describe the SMD edge. +See ../soc/qcom/qcom,smd.yaml for details on how to describe the SMD edge. = EXAMPLE The following example describes the resources needed to boot control the WCNSS, diff --git a/Documentation/devicetree/bindings/reset/altr,rst-mgr.yaml b/Documentation/devicetree/bindings/reset/altr,rst-mgr.yaml new file mode 100644 index 000000000000..4379cec6b35a --- /dev/null +++ b/Documentation/devicetree/bindings/reset/altr,rst-mgr.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/altr,rst-mgr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Altera SOCFPGA Reset Manager + +maintainers: + - Dinh Nguyen <dinguyen@altera.com> + +properties: + compatible: + oneOf: + - description: Cyclone5/Arria5/Arria10 + const: altr,rst-mgr + - description: Stratix10 ARM64 SoC + items: + - const: altr,stratix10-rst-mgr + - const: altr,rst-mgr + + reg: + maxItems: 1 + + altr,modrst-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Offset of the first modrst register + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + - altr,modrst-offset + - '#reset-cells' + +additionalProperties: false + +examples: + - | + rstmgr@ffd05000 { + compatible = "altr,rst-mgr"; + reg = <0xffd05000 0x1000>; + altr,modrst-offset = <0x10>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt b/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt deleted file mode 100644 index 43e580ef64ba..000000000000 --- a/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt +++ /dev/null @@ -1,22 +0,0 @@ -* Amlogic audio memory arbiter controller - -The Amlogic Audio ARB is a simple device which enables or -disables the access of Audio FIFOs to DDR on AXG based SoC. - -Required properties: -- compatible: 'amlogic,meson-axg-audio-arb' or - 'amlogic,meson-sm1-audio-arb' -- reg: physical base address of the controller and length of memory - mapped region. -- clocks: phandle to the fifo peripheral clock provided by the audio - clock controller. -- #reset-cells: must be 1. - -Example on the A113 SoC: - -arb: reset-controller@280 { - compatible = "amlogic,meson-axg-audio-arb"; - reg = <0x0 0x280 0x0 0x4>; - #reset-cells = <1>; - clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; -}; diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.yaml b/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.yaml new file mode 100644 index 000000000000..704a502adc5d --- /dev/null +++ b/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/reset/amlogic,meson-axg-audio-arb.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic audio memory arbiter controller + +maintainers: + - Jerome Brunet <jbrunet@baylibre.com> + +description: The Amlogic Audio ARB is a simple device which enables or disables + the access of Audio FIFOs to DDR on AXG based SoC. + +properties: + compatible: + enum: + - amlogic,meson-axg-audio-arb + - amlogic,meson-sm1-audio-arb + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + description: | + phandle to the fifo peripheral clock provided by the audio clock + controller. + + "#reset-cells": + const: 1 + +required: + - compatible + - reg + - clocks + - "#reset-cells" + +additionalProperties: false + +examples: + - | + // on the A113 SoC: + #include <dt-bindings/clock/axg-audio-clkc.h> + bus { + #address-cells = <2>; + #size-cells = <2>; + + arb: reset-controller@280 { + compatible = "amlogic,meson-axg-audio-arb"; + reg = <0x0 0x280 0x0 0x4>; + #reset-cells = <1>; + clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; + }; + }; diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml index 92922d3afd14..494a454928ce 100644 --- a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml +++ b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml @@ -17,6 +17,7 @@ properties: - amlogic,meson-gxbb-reset # Reset Controller on GXBB and compatible SoCs - amlogic,meson-axg-reset # Reset Controller on AXG and compatible SoCs - amlogic,meson-a1-reset # Reset Controller on A1 and compatible SoCs + - amlogic,meson-s4-reset # Reset Controller on S4 and compatible SoCs reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/reset/ath79-reset.txt b/Documentation/devicetree/bindings/reset/ath79-reset.txt deleted file mode 100644 index 4c56330bf398..000000000000 --- a/Documentation/devicetree/bindings/reset/ath79-reset.txt +++ /dev/null @@ -1,20 +0,0 @@ -Binding for Qualcomm Atheros AR7xxx/AR9XXX reset controller - -Please also refer to reset.txt in this directory for common reset -controller binding usage. - -Required Properties: -- compatible: has to be "qca,<soctype>-reset", "qca,ar7100-reset" - as fallback -- reg: Base address and size of the controllers memory area -- #reset-cells : Specifies the number of cells needed to encode reset - line, should be 1 - -Example: - - reset-controller@1806001c { - compatible = "qca,ar9132-reset", "qca,ar7100-reset"; - reg = <0x1806001c 0x4>; - - #reset-cells = <1>; - }; diff --git a/Documentation/devicetree/bindings/reset/berlin,reset.txt b/Documentation/devicetree/bindings/reset/berlin,reset.txt deleted file mode 100644 index 514fee098b4b..000000000000 --- a/Documentation/devicetree/bindings/reset/berlin,reset.txt +++ /dev/null @@ -1,23 +0,0 @@ -Marvell Berlin reset controller -=============================== - -Please also refer to reset.txt in this directory for common reset -controller binding usage. - -The reset controller node must be a sub-node of the chip controller -node on Berlin SoCs. - -Required properties: -- compatible: should be "marvell,berlin2-reset" -- #reset-cells: must be set to 2 - -Example: - -chip_rst: reset { - compatible = "marvell,berlin2-reset"; - #reset-cells = <2>; -}; - -&usb_phy0 { - resets = <&chip_rst 0x104 12>; -}; diff --git a/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.txt b/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.txt deleted file mode 100644 index a6f8455ae6c4..000000000000 --- a/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.txt +++ /dev/null @@ -1,18 +0,0 @@ -Bitmain BM1880 SoC Reset Controller -=================================== - -Please also refer to reset.txt in this directory for common reset -controller binding usage. - -Required properties: -- compatible: Should be "bitmain,bm1880-reset" -- reg: Offset and length of reset controller space in SCTRL. -- #reset-cells: Must be 1. - -Example: - - rst: reset-controller@c00 { - compatible = "bitmain,bm1880-reset"; - reg = <0xc00 0x8>; - #reset-cells = <1>; - }; diff --git a/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.yaml b/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.yaml new file mode 100644 index 000000000000..f0aca744388c --- /dev/null +++ b/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Manivannan Sadhasivam <mani@kernel.org> +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/reset/bitmain,bm1880-reset.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Bitmain BM1880 SoC Reset Controller + +maintainers: + - Manivannan Sadhasivam <mani@kernel.org> + +properties: + compatible: + const: bitmain,bm1880-reset + + reg: + maxItems: 1 + + "#reset-cells": + const: 1 + +required: + - compatible + - reg + - "#reset-cells" + +additionalProperties: false + +examples: + - | + rst: reset-controller@c00 { + compatible = "bitmain,bm1880-reset"; + reg = <0xc00 0x8>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/reset/lantiq,reset.txt b/Documentation/devicetree/bindings/reset/lantiq,reset.txt deleted file mode 100644 index c6aef36b7d15..000000000000 --- a/Documentation/devicetree/bindings/reset/lantiq,reset.txt +++ /dev/null @@ -1,30 +0,0 @@ -Lantiq XWAY SoC RCU reset controller binding -============================================ - -This binding describes a reset-controller found on the RCU module on Lantiq -XWAY SoCs. - -This node has to be a sub node of the Lantiq RCU block. - -------------------------------------------------------------------------------- -Required properties: -- compatible : Should be one of - "lantiq,danube-reset" - "lantiq,xrx200-reset" -- reg : Defines the following sets of registers in the parent - syscon device - - Offset of the reset set register - - Offset of the reset status register -- #reset-cells : Specifies the number of cells needed to encode the - reset line, should be 2. - The first cell takes the reset set bit and the - second cell takes the status bit. - -------------------------------------------------------------------------------- -Example for the reset-controllers on the xRX200 SoCs: - reset0: reset-controller@10 { - compatible = "lantiq,xrx200-reset"; - reg <0x10 0x04>, <0x14 0x04>; - - #reset-cells = <2>; - }; diff --git a/Documentation/devicetree/bindings/reset/lantiq,reset.yaml b/Documentation/devicetree/bindings/reset/lantiq,reset.yaml new file mode 100644 index 000000000000..15d65a5dd631 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/lantiq,reset.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/lantiq,reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lantiq XWAY SoC RCU reset controller + +maintainers: + - Martin Blumenstingl <martin.blumenstingl@googlemail.com> + +description: | + This binding describes a reset-controller found on the RCU module on Lantiq + XWAY SoCs. This node has to be a sub node of the Lantiq RCU block. + +properties: + compatible: + enum: + - lantiq,danube-reset + - lantiq,xrx200-reset + + reg: + description: | + Defines the following sets of registers in the parent syscon device + Offset of the reset set register + Offset of the reset status register + maxItems: 2 + + '#reset-cells': + description: | + The first cell takes the reset set bit and the second cell takes the + status bit. + const: 2 + +required: + - compatible + - reg + - '#reset-cells' + +additionalProperties: false + +examples: + - | + // On the xRX200 SoCs: + reset0: reset-controller@10 { + compatible = "lantiq,xrx200-reset"; + reg = <0x10 0x04>, <0x14 0x04>; + #reset-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/reset/marvell,berlin2-reset.yaml b/Documentation/devicetree/bindings/reset/marvell,berlin2-reset.yaml new file mode 100644 index 000000000000..d71d0f0a13ee --- /dev/null +++ b/Documentation/devicetree/bindings/reset/marvell,berlin2-reset.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2015 Antoine Tenart <atenart@kernel.org> +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/reset/marvell,berlin2-reset.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Marvell Berlin reset controller + +maintainers: + - Antoine Tenart <atenart@kernel.org> + +description: The reset controller node must be a sub-node of the chip + controller node on Berlin SoCs. + +properties: + compatible: + const: marvell,berlin2-reset + + "#reset-cells": + const: 2 + +required: + - compatible + - "#reset-cells" + +additionalProperties: false + +examples: + - | + chip: chip-control@ea0000 { + reg = <0xea0000 0x400>; + + chip_rst: reset { + compatible = "marvell,berlin2-reset"; + #reset-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt b/Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt deleted file mode 100644 index 17b7a6a43a29..000000000000 --- a/Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt +++ /dev/null @@ -1,32 +0,0 @@ -Nuvoton NPCM Reset controller - -Required properties: -- compatible : "nuvoton,npcm750-reset" for NPCM7XX BMC -- reg : specifies physical base address and size of the register. -- #reset-cells: must be set to 2 - -Optional property: -- nuvoton,sw-reset-number - Contains the software reset number to restart the SoC. - NPCM7xx contain four software reset that represent numbers 1 to 4. - - If 'nuvoton,sw-reset-number' is not specified software reset is disabled. - -Example: - rstc: rstc@f0801000 { - compatible = "nuvoton,npcm750-reset"; - reg = <0xf0801000 0x70>; - #reset-cells = <2>; - nuvoton,sw-reset-number = <2>; - }; - -Specifying reset lines connected to IP NPCM7XX modules -====================================================== -example: - - spi0: spi@..... { - ... - resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_PSPI1>; - ... - }; - -The index could be found in <dt-bindings/reset/nuvoton,npcm7xx-reset.h>. diff --git a/Documentation/devicetree/bindings/reset/nuvoton,npcm750-reset.yaml b/Documentation/devicetree/bindings/reset/nuvoton,npcm750-reset.yaml new file mode 100644 index 000000000000..fa5e4ea6400e --- /dev/null +++ b/Documentation/devicetree/bindings/reset/nuvoton,npcm750-reset.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/nuvoton,npcm750-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton NPCM Reset controller + +maintainers: + - Tomer Maimon <tmaimon77@gmail.com> + +properties: + compatible: + const: nuvoton,npcm750-reset + + reg: + maxItems: 1 + + '#reset-cells': + const: 2 + + nuvoton,sw-reset-number: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 4 + description: | + Contains the software reset number to restart the SoC. + If not specified, software reset is disabled. + +required: + - compatible + - reg + - '#reset-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/reset/nuvoton,npcm7xx-reset.h> + rstc: rstc@f0801000 { + compatible = "nuvoton,npcm750-reset"; + reg = <0xf0801000 0x70>; + #reset-cells = <2>; + nuvoton,sw-reset-number = <2>; + }; + + // Specifying reset lines connected to IP NPCM7XX modules + spi0: spi { + resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_PSPI1>; + }; diff --git a/Documentation/devicetree/bindings/reset/qca,ar7100-reset.yaml b/Documentation/devicetree/bindings/reset/qca,ar7100-reset.yaml new file mode 100644 index 000000000000..9be60e55cd71 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/qca,ar7100-reset.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2015 Alban Bedel <albeu@free.fr> +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/reset/qca,ar7100-reset.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Atheros AR7xxx/AR9XXX reset controller + +maintainers: + - Alban Bedel <albeu@free.fr> + +properties: + compatible: + items: + - enum: + - qca,ar9132-reset + - qca,ar9331-reset + - const: qca,ar7100-reset + + reg: + maxItems: 1 + + "#reset-cells": + const: 1 + +required: + - compatible + - reg + - "#reset-cells" + +additionalProperties: false + +examples: + - | + reset-controller@1806001c { + compatible = "qca,ar9132-reset", "qca,ar7100-reset"; + reg = <0x1806001c 0x4>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt b/Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt deleted file mode 100644 index 32d8435a41df..000000000000 --- a/Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt +++ /dev/null @@ -1,33 +0,0 @@ -Binding for the AXS10x reset controller - -This binding describes the ARC AXS10x boards custom IP-block which allows -to control reset signals of selected peripherals. For example DW GMAC, etc... -This block is controlled via memory-mapped register (AKA CREG) which -represents up-to 32 reset lines. - -As of today only the following lines are used: - - DW GMAC - line 5 - -This binding uses the common reset binding[1]. - -[1] Documentation/devicetree/bindings/reset/reset.txt - -Required properties: -- compatible: should be "snps,axs10x-reset". -- reg: should always contain pair address - length: for creg reset - bits register. -- #reset-cells: from common reset binding; Should always be set to 1. - -Example: - reset: reset-controller@11220 { - compatible = "snps,axs10x-reset"; - #reset-cells = <1>; - reg = <0x11220 0x4>; - }; - -Specifying reset lines connected to IP modules: - ethernet@.... { - .... - resets = <&reset 5>; - .... - }; diff --git a/Documentation/devicetree/bindings/reset/snps,axs10x-reset.yaml b/Documentation/devicetree/bindings/reset/snps,axs10x-reset.yaml new file mode 100644 index 000000000000..a75db3d405af --- /dev/null +++ b/Documentation/devicetree/bindings/reset/snps,axs10x-reset.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/snps,axs10x-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AXS10x reset controller + +maintainers: + - Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> + +description: | + This binding describes the ARC AXS10x boards custom IP-block which allows + to control reset signals of selected peripherals. For example DW GMAC, etc... + This block is controlled via memory-mapped register (AKA CREG) which + represents up-to 32 reset lines. + As of today only the following lines are used: + - DW GMAC - line 5 + +properties: + compatible: + const: snps,axs10x-reset + + reg: + maxItems: 1 + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + - '#reset-cells' + +additionalProperties: false + +examples: + - | + reset: reset-controller@11220 { + compatible = "snps,axs10x-reset"; + #reset-cells = <1>; + reg = <0x11220 0x4>; + }; + + // Specifying reset lines connected to IP modules: + ethernet { + resets = <&reset 5>; + }; diff --git a/Documentation/devicetree/bindings/reset/socfpga-reset.txt b/Documentation/devicetree/bindings/reset/socfpga-reset.txt deleted file mode 100644 index 38fe34fd8b8a..000000000000 --- a/Documentation/devicetree/bindings/reset/socfpga-reset.txt +++ /dev/null @@ -1,16 +0,0 @@ -Altera SOCFPGA Reset Manager - -Required properties: -- compatible : "altr,rst-mgr" for (Cyclone5/Arria5/Arria10) - "altr,stratix10-rst-mgr","altr,rst-mgr" for Stratix10 ARM64 SoC -- reg : Should contain 1 register ranges(address and length) -- altr,modrst-offset : Should contain the offset of the first modrst register. -- #reset-cells: 1 - -Example: - rstmgr@ffd05000 { - #reset-cells = <1>; - compatible = "altr,rst-mgr"; - reg = <0xffd05000 0x1000>; - altr,modrst-offset = <0x10>; - }; diff --git a/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml b/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml index bfbd3e9b4186..0a2c13e1e230 100644 --- a/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml +++ b/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml @@ -38,25 +38,49 @@ properties: minItems: 1 maxItems: 2 - clock-names: - oneOf: - - items: # for Pro4, Pro5 - - const: gio - - const: link - - items: # for others - - const: link + clock-names: true resets: minItems: 1 maxItems: 2 - reset-names: - oneOf: - - items: # for Pro4, Pro5 - - const: gio - - const: link - - items: # for others - - const: link + reset-names: true + +allOf: + - if: + properties: + compatible: + contains: + enum: + - socionext,uniphier-pro4-usb3-reset + - socionext,uniphier-pro5-usb3-reset + - socionext,uniphier-pro4-ahci-reset + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: gio + - const: link + resets: + minItems: 2 + maxItems: 2 + reset-names: + items: + - const: gio + - const: link + else: + properties: + clocks: + maxItems: 1 + clock-names: + const: link + resets: + maxItems: 1 + reset-names: + const: link additionalProperties: false diff --git a/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt b/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt deleted file mode 100644 index 9ca27761f811..000000000000 --- a/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt +++ /dev/null @@ -1,42 +0,0 @@ -STMicroelectronics STi family Sysconfig Picophy SoftReset Controller -============================================================================= - -This binding describes a reset controller device that is used to enable and -disable on-chip PicoPHY USB2 phy(s) using "softreset" control bits found in -the STi family SoC system configuration registers. - -The actual action taken when softreset is asserted is hardware dependent. -However, when asserted it may not be possible to access the hardware's -registers and after an assert/deassert sequence the hardware's previous state -may no longer be valid. - -Please refer to Documentation/devicetree/bindings/reset/reset.txt -for common reset controller binding usage. - -Required properties: -- compatible: Should be "st,stih407-picophyreset" -- #reset-cells: 1, see below - -Example: - - picophyreset: picophyreset-controller { - compatible = "st,stih407-picophyreset"; - #reset-cells = <1>; - }; - -Specifying picophyreset control of devices -======================================= - -Device nodes should specify the reset channel required in their "resets" -property, containing a phandle to the picophyreset device node and an -index specifying which channel to use, as described in -Documentation/devicetree/bindings/reset/reset.txt. - -Example: - - usb2_picophy0: usbpicophy@0 { - resets = <&picophyreset STIH407_PICOPHY0_RESET>; - }; - -Macro definitions for the supported reset channels can be found in: -include/dt-bindings/reset/stih407-resets.h diff --git a/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt b/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt deleted file mode 100644 index 92527138bc93..000000000000 --- a/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt +++ /dev/null @@ -1,45 +0,0 @@ -STMicroelectronics STi family Sysconfig Peripheral Powerdown Reset Controller -============================================================================= - -This binding describes a reset controller device that is used to enable and -disable on-chip peripheral controllers such as USB and SATA, using -"powerdown" control bits found in the STi family SoC system configuration -registers. These have been grouped together into a single reset controller -device for convenience. - -The actual action taken when powerdown is asserted is hardware dependent. -However, when asserted it may not be possible to access the hardware's -registers and after an assert/deassert sequence the hardware's previous state -may no longer be valid. - -Please refer to reset.txt in this directory for common reset -controller binding usage. - -Required properties: -- compatible: Should be "st,stih407-powerdown" -- #reset-cells: 1, see below - -example: - - powerdown: powerdown-controller { - compatible = "st,stih407-powerdown"; - #reset-cells = <1>; - }; - - -Specifying powerdown control of devices -======================================= - -Device nodes should specify the reset channel required in their "resets" -property, containing a phandle to the powerdown device node and an -index specifying which channel to use, as described in reset.txt - -example: - - st_dwc3: dwc3@8f94000 { - resets = <&powerdown STIH407_USB3_POWERDOWN>, - }; - -Macro definitions for the supported reset channels can be found in: - -include/dt-bindings/reset/stih407-resets.h diff --git a/Documentation/devicetree/bindings/reset/st,stih407-picophyreset.yaml b/Documentation/devicetree/bindings/reset/st,stih407-picophyreset.yaml new file mode 100644 index 000000000000..329ae4ae1a10 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/st,stih407-picophyreset.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/st,stih407-picophyreset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STi family Sysconfig Picophy SoftReset Controller + +maintainers: + - Peter Griffin <peter.griffin@linaro.org> + +description: | + This binding describes a reset controller device that is used to enable and + disable on-chip PicoPHY USB2 phy(s) using "softreset" control bits found in + the STi family SoC system configuration registers. + + The actual action taken when softreset is asserted is hardware dependent. + However, when asserted it may not be possible to access the hardware's + registers and after an assert/deassert sequence the hardware's previous state + may no longer be valid. + +properties: + compatible: + const: st,stih407-picophyreset + + '#reset-cells': + const: 1 + +required: + - compatible + - '#reset-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/reset/stih407-resets.h> + + picophyreset: picophyreset-controller { + compatible = "st,stih407-picophyreset"; + #reset-cells = <1>; + }; + + // Specifying picophyreset control of devices + usb2_picophy0: usbpicophy { + resets = <&picophyreset STIH407_PICOPHY0_RESET>; + }; diff --git a/Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml b/Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml new file mode 100644 index 000000000000..d3790e602659 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/st,stih407-powerdown.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STi family Sysconfig Peripheral Powerdown Reset Controller + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@st.com> + +description: | + This binding describes a reset controller device that is used to enable and + disable on-chip peripheral controllers such as USB and SATA, using + "powerdown" control bits found in the STi family SoC system configuration + registers. These have been grouped together into a single reset controller + device for convenience. + + The actual action taken when powerdown is asserted is hardware dependent. + However, when asserted it may not be possible to access the hardware's + registers and after an assert/deassert sequence the hardware's previous state + may no longer be valid. + +properties: + compatible: + const: st,stih407-powerdown + + '#reset-cells': + const: 1 + +required: + - compatible + - '#reset-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/reset/stih407-resets.h> + + powerdown: powerdown-controller { + compatible = "st,stih407-powerdown"; + #reset-cells = <1>; + }; + + // Specifying powerdown control of devices: + st_dwc3: dwc3 { + resets = <&powerdown STIH407_USB3_POWERDOWN>; + }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml index 3f41c202b77b..2bf5293fc995 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml @@ -63,116 +63,23 @@ required: - ranges patternProperties: - "^.*@[0-9a-f]+$": - type: object - description: Common properties for GENI Serial Engine based I2C, SPI and - UART controller. - - properties: - reg: - description: GENI Serial Engine register address and length. - maxItems: 1 - - clock-names: - const: se - - clocks: - description: Serial engine core clock needed by the device. - maxItems: 1 - - interconnects: - minItems: 2 - maxItems: 3 - - interconnect-names: - minItems: 2 - items: - - const: qup-core - - const: qup-config - - const: qup-memory - - required: - - reg - - clock-names - - clocks - "spi@[0-9a-f]+$": type: object description: GENI serial engine based SPI controller. SPI in master mode supports up to 50MHz, up to four chip selects, programmable data path from 4 bits to 32 bits and numerous protocol variants. - $ref: /schemas/spi/spi-controller.yaml# - - properties: - compatible: - enum: - - qcom,geni-spi - - interrupts: - maxItems: 1 - - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - - required: - - compatible - - interrupts - - "#address-cells" - - "#size-cells" + $ref: /schemas/spi/qcom,spi-geni-qcom.yaml# "i2c@[0-9a-f]+$": type: object description: GENI serial engine based I2C controller. - $ref: /schemas/i2c/i2c-controller.yaml# - - properties: - compatible: - enum: - - qcom,geni-i2c - - interrupts: - maxItems: 1 - - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - - clock-frequency: - description: Desired I2C bus clock frequency in Hz. - default: 100000 - - required: - - compatible - - interrupts - - "#address-cells" - - "#size-cells" + $ref: /schemas/i2c/qcom,i2c-geni-qcom.yaml# "serial@[0-9a-f]+$": type: object description: GENI Serial Engine based UART Controller. - $ref: /schemas/serial.yaml# - - properties: - compatible: - enum: - - qcom,geni-uart - - qcom,geni-debug-uart - - interrupts: - minItems: 1 - items: - - description: UART core irq - - description: Wakeup irq (RX GPIO) - - required: - - compatible - - interrupts + $ref: /schemas/serial/qcom,serial-geni-qcom.yaml# additionalProperties: false diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml new file mode 100644 index 000000000000..f5ecf4a8c377 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml @@ -0,0 +1,272 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,rpmh-rsc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm RPMH RSC + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + +description: | + Resource Power Manager Hardened (RPMH) is the mechanism for communicating + with the hardened resource accelerators on Qualcomm SoCs. Requests to the + resources can be written to the Trigger Command Set (TCS) registers and + using a (addr, val) pair and triggered. Messages in the TCS are then sent in + sequence over an internal bus. + + The hardware block (Direct Resource Voter or DRV) is a part of the h/w entity + (Resource State Coordinator a.k.a RSC) that can handle multiple sleep and + active/wake resource requests. Multiple such DRVs can exist in a SoC and can + be written to from Linux. The structure of each DRV follows the same template + with a few variations that are captured by the properties here. + + A TCS may be triggered from Linux or triggered by the F/W after all the CPUs + have powered off to facilitate idle power saving. TCS could be classified as:: + ACTIVE - Triggered by Linux + SLEEP - Triggered by F/W + WAKE - Triggered by F/W + CONTROL - Triggered by F/W + See also:: <dt-bindings/soc/qcom,rpmh-rsc.h> + + The order in which they are described in the DT, should match the hardware + configuration. + + Requests can be made for the state of a resource, when the subsystem is + active or idle. When all subsystems like Modem, GPU, CPU are idle, the + resource state will be an aggregate of the sleep votes from each of those + subsystems. Clients may request a sleep value for their shared resources in + addition to the active mode requests. + + Drivers that want to use the RSC to communicate with RPMH must specify their + bindings as child nodes of the RSC controllers they wish to communicate with. + +properties: + compatible: + const: qcom,rpmh-rsc + + interrupts: + minItems: 1 + maxItems: 4 + description: + The interrupt that trips when a message complete/response is received for + this DRV from the accelerators. + Number of interrupts must match number of DRV blocks. + + label: + description: + Name for the RSC. The name would be used in trace logs. + + qcom,drv-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The ID of the DRV in the RSC block that will be used by this controller. + + qcom,tcs-config: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + - items: + - description: TCS type + enum: [ 0, 1, 2, 3 ] + - description: Number of TCS + - items: + - description: TCS type + enum: [ 0, 1, 2, 3 ] + - description: Number of TCS + - items: + - description: TCS type + enum: [ 0, 1, 2, 3] + - description: Numbe r of TCS + - items: + - description: TCS type + enum: [ 0, 1, 2, 3 ] + - description: Number of TCS + description: | + The tuple defining the configuration of TCS. Must have two cells which + describe each TCS type. The order of the TCS must match the hardware + configuration. + Cell 1 (TCS Type):: TCS types to be specified:: + - ACTIVE_TCS + - SLEEP_TCS + - WAKE_TCS + - CONTROL_TCS + Cell 2 (Number of TCS):: <u32> + + qcom,tcs-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The offset of the TCS blocks. + + reg: + minItems: 1 + maxItems: 4 + + reg-names: + minItems: 1 + items: + - const: drv-0 + - const: drv-1 + - const: drv-2 + - const: drv-3 + + bcm-voter: + $ref: /schemas/interconnect/qcom,bcm-voter.yaml# + + clock-controller: + $ref: /schemas/clock/qcom,rpmhcc.yaml# + + power-controller: + $ref: /schemas/power/qcom,rpmpd.yaml# + +patternProperties: + '-regulators$': + $ref: /schemas/regulator/qcom,rpmh-regulator.yaml# + +required: + - compatible + - interrupts + - qcom,drv-id + - qcom,tcs-config + - qcom,tcs-offset + - reg + - reg-names + +additionalProperties: false + +examples: + - | + // For a TCS whose RSC base address is 0x179C0000 and is at a DRV id of + // 2, the register offsets for DRV2 start at 0D00, the register + // calculations are like this:: + // DRV0: 0x179C0000 + // DRV2: 0x179C0000 + 0x10000 = 0x179D0000 + // DRV2: 0x179C0000 + 0x10000 * 2 = 0x179E0000 + // TCS-OFFSET: 0xD00 + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/soc/qcom,rpmh-rsc.h> + + rsc@179c0000 { + compatible = "qcom,rpmh-rsc"; + reg = <0x179c0000 0x10000>, + <0x179d0000 0x10000>, + <0x179e0000 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + label = "apps_rsc"; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, + <SLEEP_TCS 3>, + <WAKE_TCS 3>, + <CONTROL_TCS 1>; + }; + + - | + // For a TCS whose RSC base address is 0xAF20000 and is at DRV id of 0, the + // register offsets for DRV0 start at 01C00, the register calculations are + // like this:: + // DRV0: 0xAF20000 + // TCS-OFFSET: 0x1C00 + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/soc/qcom,rpmh-rsc.h> + + rsc@af20000 { + compatible = "qcom,rpmh-rsc"; + reg = <0xaf20000 0x10000>; + reg-names = "drv-0"; + interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>; + label = "disp_rsc"; + qcom,tcs-offset = <0x1c00>; + qcom,drv-id = <0>; + qcom,tcs-config = <ACTIVE_TCS 0>, + <SLEEP_TCS 1>, + <WAKE_TCS 1>, + <CONTROL_TCS 0>; + }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/soc/qcom,rpmh-rsc.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + rsc@18200000 { + compatible = "qcom,rpmh-rsc"; + reg = <0x18200000 0x10000>, + <0x18210000 0x10000>, + <0x18220000 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + label = "apps_rsc"; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, + <SLEEP_TCS 3>, + <WAKE_TCS 3>, + <CONTROL_TCS 0>; + + clock-controller { + compatible = "qcom,sm8350-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + power-controller { + compatible = "qcom,sm8350-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + + bcm-voter { + compatible = "qcom,bcm-voter"; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml index 3361218e278f..2a4b6c06e7c9 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml @@ -12,7 +12,7 @@ description: | to vote for state of the system resources, such as clocks, regulators and bus frequencies. - The SMD information for the RPM edge should be filled out. See qcom,smd.txt + The SMD information for the RPM edge should be filled out. See qcom,smd.yaml for the required edge properties. All SMD related properties will reside within the RPM node itself. @@ -25,7 +25,8 @@ description: | rpm_requests. maintainers: - - Kathiravan T <kathirav@codeaurora.org> + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> properties: compatible: @@ -83,7 +84,7 @@ examples: qcom,ipc = <&apcs 8 0>; qcom,smd-edge = <15>; - rpm_requests { + rpm-requests { compatible = "qcom,rpm-msm8974"; qcom,smd-channels = "rpm_requests"; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt deleted file mode 100644 index 234ae2256501..000000000000 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt +++ /dev/null @@ -1,98 +0,0 @@ -Qualcomm Shared Memory Driver (SMD) binding - -This binding describes the Qualcomm Shared Memory Driver, a fifo based -communication channel for sending data between the various subsystems in -Qualcomm platforms. - -- compatible: - Usage: required - Value type: <stringlist> - Definition: must be "qcom,smd" - -= EDGES - -Each subnode of the SMD node represents a remote subsystem or a remote -processor of some sort - or in SMD language an "edge". The name of the edges -are not important. -The edge is described by the following properties: - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the IRQ used by the remote processor to - signal this processor about communication related updates - -- mboxes: - Usage: required - Value type: <prop-encoded-array> - Definition: reference to the associated doorbell in APCS, as described - in mailbox/mailbox.txt - -- qcom,ipc: - Usage: required, unless mboxes is specified - Value type: <prop-encoded-array> - Definition: three entries specifying the outgoing ipc bit used for - signaling the remote processor: - - phandle to a syscon node representing the apcs registers - - u32 representing offset to the register within the syscon - - u32 representing the ipc bit within the register - -- qcom,smd-edge: - Usage: required - Value type: <u32> - Definition: the identifier of the remote processor in the smd channel - allocation table - -- qcom,remote-pid: - Usage: optional - Value type: <u32> - Definition: the identifier for the remote processor as known by the rest - of the system. - -- label: - Usage: optional - Value type: <string> - Definition: name of the edge, used for debugging and identification - purposes. The node name will be used if this is not - present. - -= SMD DEVICES - -In turn, subnodes of the "edges" represent devices tied to SMD channels on that -"edge". The names of the devices are not important. The properties of these -nodes are defined by the individual bindings for the SMD devices - but must -contain the following property: - -- qcom,smd-channels: - Usage: required - Value type: <stringlist> - Definition: a list of channels tied to this device, used for matching - the device to channels - -= EXAMPLE - -The following example represents a smd node, with one edge representing the -"rpm" subsystem. For the "rpm" subsystem we have a device tied to the -"rpm_request" channel. - - apcs: syscon@f9011000 { - compatible = "syscon"; - reg = <0xf9011000 0x1000>; - }; - - smd { - compatible = "qcom,smd"; - - rpm { - interrupts = <0 168 1>; - qcom,ipc = <&apcs 8 0>; - qcom,smd-edge = <15>; - - rpm_requests { - compatible = "qcom,rpm-msm8974"; - qcom,smd-channels = "rpm_requests"; - - ... - }; - }; - }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml new file mode 100644 index 000000000000..e6f9ffa1c0ea --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml @@ -0,0 +1,137 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,smd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Shared Memory Driver + +maintainers: + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + The Qualcomm Shared Memory Driver is a FIFO based communication channel for + sending data between the various subsystems in Qualcomm platforms. + +properties: + compatible: + const: qcom,smd + +patternProperties: + "^.*-edge|rpm$": + type: object + description: + Each subnode of the SMD node represents a remote subsystem or a remote + processor of some sort - or in SMD language an "edge". The name of the + edges are not important. + + properties: + interrupts: + maxItems: 1 + + label: + $ref: /schemas/types.yaml#/definitions/string + description: + Name of the edge, used for debugging and identification purposes. The + node name will be used if this is not present. + + mboxes: + maxItems: 1 + description: + Reference to the mailbox representing the outgoing doorbell in APCS for + this client. + + qcom,ipc: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to a syscon node representing the APCS registers + - description: u32 representing offset to the register within the syscon + - description: u32 representing the ipc bit within the register + description: + Three entries specifying the outgoing ipc bit used for signaling the + remote processor. + + qcom,smd-edge: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The identifier of the remote processor in the smd channel allocation + table. + + qcom,remote-pid: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The identifier for the remote processor as known by the rest of the + system. + + # Binding for edge subnodes is not complete + patternProperties: + "^rpm-requests$": + type: object + description: + In turn, subnodes of the "edges" represent devices tied to SMD + channels on that "edge". The names of the devices are not + important. The properties of these nodes are defined by the + individual bindings for the SMD devices. + + properties: + qcom,smd-channels: + $ref: /schemas/types.yaml#/definitions/string-array + minItems: 1 + maxItems: 32 + description: + A list of channels tied to this device, used for matching the + device to channels. + + required: + - compatible + - qcom,smd-channels + + additionalProperties: true + + required: + - interrupts + - qcom,smd-edge + + oneOf: + - required: + - mboxes + - required: + - qcom,ipc + + additionalProperties: false + +required: + - compatible + +additionalProperties: false + +examples: + # The following example represents a smd node, with one edge representing the + # "rpm" subsystem. For the "rpm" subsystem we have a device tied to the + # "rpm_request" channel. + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + shared-memory { + compatible = "qcom,smd"; + + rpm { + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm-requests { + compatible = "qcom,rpm-msm8974"; + qcom,smd-channels = "rpm_requests"; + + clock-controller { + compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc"; + #clock-cells = <1>; + }; + + }; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt deleted file mode 100644 index 2993b5a97dd6..000000000000 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt +++ /dev/null @@ -1,104 +0,0 @@ -Qualcomm Shared Memory State Machine - -The Shared Memory State Machine facilitates broadcasting of single bit state -information between the processors in a Qualcomm SoC. Each processor is -assigned 32 bits of state that can be modified. A processor can through a -matrix of bitmaps signal subscription of notifications upon changes to a -certain bit owned by a certain remote processor. - -- compatible: - Usage: required - Value type: <string> - Definition: must be one of: - "qcom,smsm" - -- qcom,ipc-N: - Usage: required - Value type: <prop-encoded-array> - Definition: three entries specifying the outgoing ipc bit used for - signaling the N:th remote processor - - phandle to a syscon node representing the apcs registers - - u32 representing offset to the register within the syscon - - u32 representing the ipc bit within the register - -- qcom,local-host: - Usage: optional - Value type: <u32> - Definition: identifier of the local processor in the list of hosts, or - in other words specifier of the column in the subscription - matrix representing the local processor - defaults to host 0 - -- #address-cells: - Usage: required - Value type: <u32> - Definition: must be 1 - -- #size-cells: - Usage: required - Value type: <u32> - Definition: must be 0 - -= SUBNODES -Each processor's state bits are described by a subnode of the smsm device node. -Nodes can either be flagged as an interrupt-controller to denote a remote -processor's state bits or the local processors bits. The node names are not -important. - -- reg: - Usage: required - Value type: <u32> - Definition: specifies the offset, in words, of the first bit for this - entry - -- #qcom,smem-state-cells: - Usage: required for local entry - Value type: <u32> - Definition: must be 1 - denotes bit number - -- interrupt-controller: - Usage: required for remote entries - Value type: <empty> - Definition: marks the entry as a interrupt-controller and the state bits - to belong to a remote processor - -- #interrupt-cells: - Usage: required for remote entries - Value type: <u32> - Definition: must be 2 - denotes bit number and IRQ flags - -- interrupts: - Usage: required for remote entries - Value type: <prop-encoded-array> - Definition: one entry specifying remote IRQ used by the remote processor - to signal changes of its state bits - - -= EXAMPLE -The following example shows the SMEM setup for controlling properties of the -wireless processor, defined from the 8974 apps processor's point-of-view. It -encompasses one outbound entry and the outgoing interrupt for the wireless -processor. - -smsm { - compatible = "qcom,smsm"; - - #address-cells = <1>; - #size-cells = <0>; - - qcom,ipc-3 = <&apcs 8 19>; - - apps_smsm: apps@0 { - reg = <0>; - - #qcom,smem-state-cells = <1>; - }; - - wcnss_smsm: wcnss@7 { - reg = <7>; - interrupts = <0 144 1>; - - interrupt-controller; - #interrupt-cells = <2>; - }; -}; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.yaml new file mode 100644 index 000000000000..db67cf043256 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,smsm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Shared Memory State Machine + +maintainers: + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + The Shared Memory State Machine facilitates broadcasting of single bit state + information between the processors in a Qualcomm SoC. Each processor is + assigned 32 bits of state that can be modified. A processor can through a + matrix of bitmaps signal subscription of notifications upon changes to a + certain bit owned by a certain remote processor. + +properties: + compatible: + const: qcom,smsm + + '#address-cells': + const: 1 + + qcom,local-host: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + description: + Identifier of the local processor in the list of hosts, or in other words + specifier of the column in the subscription matrix representing the local + processor. + + '#size-cells': + const: 0 + +patternProperties: + "^qcom,ipc-[1-4]$": + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to a syscon node representing the APCS registers + - description: u32 representing offset to the register within the syscon + - description: u32 representing the ipc bit within the register + description: + Three entries specifying the outgoing ipc bit used for signaling the N:th + remote processor. + + "@[0-9a-f]$": + type: object + description: + Each processor's state bits are described by a subnode of the SMSM device + node. Nodes can either be flagged as an interrupt-controller to denote a + remote processor's state bits or the local processors bits. The node + names are not important. + + properties: + reg: + maxItems: 1 + + interrupt-controller: + description: + Marks the entry as a interrupt-controller and the state bits to + belong to a remote processor. + + '#interrupt-cells': + const: 2 + + interrupts: + maxItems: 1 + description: + One entry specifying remote IRQ used by the remote processor to + signal changes of its state bits. + + '#qcom,smem-state-cells': + $ref: /schemas/types.yaml#/definitions/uint32 + const: 1 + description: + Required for local entry. Denotes bit number. + + required: + - reg + + oneOf: + - required: + - '#qcom,smem-state-cells' + - required: + - interrupt-controller + - '#interrupt-cells' + - interrupts + + additionalProperties: false + +required: + - compatible + - '#address-cells' + - '#size-cells' + +anyOf: + - required: + - qcom,ipc-1 + - required: + - qcom,ipc-2 + - required: + - qcom,ipc-3 + - required: + - qcom,ipc-4 + +additionalProperties: false + +examples: + # The following example shows the SMEM setup for controlling properties of + # the wireless processor, defined from the 8974 apps processor's + # point-of-view. It encompasses one outbound entry and the outgoing interrupt + # for the wireless processor. + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + shared-memory { + compatible = "qcom,smsm"; + #address-cells = <1>; + #size-cells = <0>; + qcom,ipc-3 = <&apcs 8 19>; + + apps_smsm: apps@0 { + reg = <0>; + #qcom,smem-state-cells = <1>; + }; + + wcnss_smsm: wcnss@7 { + reg = <7>; + interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt deleted file mode 100644 index 1382b64e1381..000000000000 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt +++ /dev/null @@ -1,131 +0,0 @@ -Qualcomm WCNSS Binding - -This binding describes the Qualcomm WCNSS hardware. It consists of control -block and a BT, WiFi and FM radio block, all using SMD as command channels. - -- compatible: - Usage: required - Value type: <string> - Definition: must be: "qcom,wcnss", - -- qcom,smd-channel: - Usage: required - Value type: <string> - Definition: standard SMD property specifying the SMD channel used for - communication with the WiFi firmware. - Should be "WCNSS_CTRL". - -- qcom,mmio: - Usage: required - Value type: <prop-encoded-array> - Definition: reference to a node specifying the wcnss "ccu" and "dxe" - register blocks. The node must be compatible with one of - the following: - "qcom,riva", - "qcom,pronto" - -- firmware-name: - Usage: optional - Value type: <string> - Definition: specifies the relative firmware image path for the WLAN NV - blob. Defaults to "wlan/prima/WCNSS_qcom_wlan_nv.bin" if - not specified. - -= SUBNODES -The subnodes of the wcnss node are optional and describe the individual blocks in -the WCNSS. - -== Bluetooth -The following properties are defined to the bluetooth node: - -- compatible: - Usage: required - Value type: <string> - Definition: must be: - "qcom,wcnss-bt" - -- local-bd-address: - Usage: optional - Value type: <u8 array> - Definition: see Documentation/devicetree/bindings/net/bluetooth.txt - -== WiFi -The following properties are defined to the WiFi node: - -- compatible: - Usage: required - Value type: <string> - Definition: must be one of: - "qcom,wcnss-wlan", - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the "rx" and "tx" interrupts - -- interrupt-names: - Usage: required - Value type: <stringlist> - Definition: must contain "rx" and "tx" - -- qcom,smem-state: - Usage: required - Value type: <prop-encoded-array> - Definition: should reference the tx-enable and tx-rings-empty SMEM states - -- qcom,smem-state-names: - Usage: required - Value type: <stringlist> - Definition: must contain "tx-enable" and "tx-rings-empty" - -= EXAMPLE -The following example represents a SMD node, with one edge representing the -"pronto" subsystem, with the wcnss device and its wcn3680 BT and WiFi blocks -described; as found on the 8974 platform. - -smd { - compatible = "qcom,smd"; - - pronto-edge { - interrupts = <0 142 1>; - - qcom,ipc = <&apcs 8 17>; - qcom,smd-edge = <6>; - - wcnss { - compatible = "qcom,wcnss"; - qcom,smd-channels = "WCNSS_CTRL"; - - #address-cells = <1>; - #size-cells = <1>; - - qcom,mmio = <&pronto>; - - bt { - compatible = "qcom,wcnss-bt"; - - /* BD address 00:11:22:33:44:55 */ - local-bd-address = [ 55 44 33 22 11 00 ]; - }; - - wlan { - compatible = "qcom,wcnss-wlan"; - - interrupts = <0 145 0>, <0 146 0>; - interrupt-names = "tx", "rx"; - - qcom,smem-state = <&apps_smsm 10>, <&apps_smsm 9>; - qcom,smem-state-names = "tx-enable", "tx-rings-empty"; - }; - }; - }; -}; - -soc { - pronto: pronto { - compatible = "qcom,pronto"; - - reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>; - reg-names = "ccu", "dxe", "pmu"; - }; -}; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml new file mode 100644 index 000000000000..d891ecfb2691 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml @@ -0,0 +1,137 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,wcnss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm WCNSS + +maintainers: + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> + +description: + The Qualcomm WCNSS hardware consists of control block and a BT, WiFi and FM + radio block, all using SMD as command channels. + +properties: + compatible: + const: qcom,wcnss + + firmware-name: + $ref: /schemas/types.yaml#/definitions/string + default: "wlan/prima/WCNSS_qcom_wlan_nv.bin" + description: + Relative firmware image path for the WLAN NV blob. + + qcom,mmio: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + Reference to a node specifying the wcnss "ccu" and "dxe" register blocks. + The node must be compatible with one of the following:: + - qcom,riva" + - qcom,pronto" + + qcom,smd-channels: + $ref: /schemas/types.yaml#/definitions/string + const: WCNSS_CTRL + description: + Standard SMD property specifying the SMD channel used for communication + with the WiFi firmware. + + bluetooth: + type: object + additionalProperties: false + properties: + compatible: + const: qcom,wcnss-bt + + local-bd-address: + $ref: /schemas/types.yaml#/definitions/uint8-array + maxItems: 6 + description: + See Documentation/devicetree/bindings/net/bluetooth.txt + + required: + - compatible + + wifi: + additionalProperties: false + type: object + properties: + compatible: + const: qcom,wcnss-wlan + + interrupts: + maxItems: 2 + + interrupt-names: + items: + - const: tx + - const: rx + + qcom,smem-states: + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 2 + description: + Should reference the tx-enable and tx-rings-empty SMEM states. + + qcom,smem-state-names: + $ref: /schemas/types.yaml#/definitions/string-array + items: + - const: tx-enable + - const: tx-rings-empty + description: + Names of SMEM states. + + required: + - compatible + - interrupts + - interrupt-names + - qcom,smem-states + - qcom,smem-state-names + +required: + - compatible + - qcom,mmio + - qcom,smd-channels + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + smd-edge { + interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 17>; + qcom,smd-edge = <6>; + qcom,remote-pid = <4>; + + label = "pronto"; + + wcnss { + compatible = "qcom,wcnss"; + qcom,smd-channels = "WCNSS_CTRL"; + + qcom,mmio = <&pronto>; + + bluetooth { + compatible = "qcom,wcnss-bt"; + /* BD address 00:11:22:33:44:55 */ + local-bd-address = [ 55 44 33 22 11 00 ]; + }; + + wifi { + compatible = "qcom,wcnss-wlan"; + + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; + qcom,smem-state-names = "tx-enable", "tx-rings-empty"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt b/Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt deleted file mode 100644 index 9b86d1eff219..000000000000 --- a/Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt +++ /dev/null @@ -1,137 +0,0 @@ -RPMH RSC: ------------- - -Resource Power Manager Hardened (RPMH) is the mechanism for communicating with -the hardened resource accelerators on Qualcomm SoCs. Requests to the resources -can be written to the Trigger Command Set (TCS) registers and using a (addr, -val) pair and triggered. Messages in the TCS are then sent in sequence over an -internal bus. - -The hardware block (Direct Resource Voter or DRV) is a part of the h/w entity -(Resource State Coordinator a.k.a RSC) that can handle multiple sleep and -active/wake resource requests. Multiple such DRVs can exist in a SoC and can -be written to from Linux. The structure of each DRV follows the same template -with a few variations that are captured by the properties here. - -A TCS may be triggered from Linux or triggered by the F/W after all the CPUs -have powered off to facilitate idle power saving. TCS could be classified as - - - ACTIVE /* Triggered by Linux */ - SLEEP /* Triggered by F/W */ - WAKE /* Triggered by F/W */ - CONTROL /* Triggered by F/W */ - -The order in which they are described in the DT, should match the hardware -configuration. - -Requests can be made for the state of a resource, when the subsystem is active -or idle. When all subsystems like Modem, GPU, CPU are idle, the resource state -will be an aggregate of the sleep votes from each of those subsystems. Clients -may request a sleep value for their shared resources in addition to the active -mode requests. - -Properties: - -- compatible: - Usage: required - Value type: <string> - Definition: Should be "qcom,rpmh-rsc". - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: The first register specifies the base address of the - DRV(s). The number of DRVs in the dependent on the RSC. - The tcs-offset specifies the start address of the - TCS in the DRVs. - -- reg-names: - Usage: required - Value type: <string> - Definition: Maps the register specified in the reg property. Must be - "drv-0", "drv-1", "drv-2" etc and "tcs-offset". The - -- interrupts: - Usage: required - Value type: <prop-encoded-interrupt> - Definition: The interrupt that trips when a message complete/response - is received for this DRV from the accelerators. - -- qcom,drv-id: - Usage: required - Value type: <u32> - Definition: The id of the DRV in the RSC block that will be used by - this controller. - -- qcom,tcs-config: - Usage: required - Value type: <prop-encoded-array> - Definition: The tuple defining the configuration of TCS. - Must have 2 cells which describe each TCS type. - <type number_of_tcs>. - The order of the TCS must match the hardware - configuration. - - Cell #1 (TCS Type): TCS types to be specified - - ACTIVE_TCS - SLEEP_TCS - WAKE_TCS - CONTROL_TCS - - Cell #2 (Number of TCS): <u32> - -- label: - Usage: optional - Value type: <string> - Definition: Name for the RSC. The name would be used in trace logs. - -Drivers that want to use the RSC to communicate with RPMH must specify their -bindings as child nodes of the RSC controllers they wish to communicate with. - -Example 1: - -For a TCS whose RSC base address is is 0x179C0000 and is at a DRV id of 2, the -register offsets for DRV2 start at 0D00, the register calculations are like -this - -DRV0: 0x179C0000 -DRV2: 0x179C0000 + 0x10000 = 0x179D0000 -DRV2: 0x179C0000 + 0x10000 * 2 = 0x179E0000 -TCS-OFFSET: 0xD00 - - apps_rsc: rsc@179c0000 { - label = "apps_rsc"; - compatible = "qcom,rpmh-rsc"; - reg = <0x179c0000 0x10000>, - <0x179d0000 0x10000>, - <0x179e0000 0x10000>; - reg-names = "drv-0", "drv-1", "drv-2"; - interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; - qcom,tcs-offset = <0xd00>; - qcom,drv-id = <2>; - qcom,tcs-config = <ACTIVE_TCS 2>, - <SLEEP_TCS 3>, - <WAKE_TCS 3>, - <CONTROL_TCS 1>; - }; - -Example 2: - -For a TCS whose RSC base address is 0xAF20000 and is at DRV id of 0, the -register offsets for DRV0 start at 01C00, the register calculations are like -this - -DRV0: 0xAF20000 -TCS-OFFSET: 0x1C00 - - disp_rsc: rsc@af20000 { - label = "disp_rsc"; - compatible = "qcom,rpmh-rsc"; - reg = <0xaf20000 0x10000>; - reg-names = "drv-0"; - interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>; - qcom,tcs-offset = <0x1c00>; - qcom,drv-id = <0>; - qcom,tcs-config = <ACTIVE_TCS 0>, - <SLEEP_TCS 1>, - <WAKE_TCS 1>, - <CONTROL_TCS 0>; - }; diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml index b2ba7bed89b2..75a2b8bb25fb 100644 --- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml +++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml @@ -15,6 +15,9 @@ properties: - items: - enum: - rockchip,rk3288-sgrf + - rockchip,rk3566-pipe-grf + - rockchip,rk3568-pipe-grf + - rockchip,rk3568-pipe-phy-grf - rockchip,rk3568-usb2phy-grf - rockchip,rv1108-usbgrf - const: syscon diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml index 0cabb773c397..fde886a8cf43 100644 --- a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml +++ b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml @@ -77,7 +77,7 @@ patternProperties: description: Child node describing underlying UART/serial "^spi@[0-9a-f]+$": - type: object + $ref: /schemas/spi/samsung,spi.yaml description: Child node describing underlying SPI required: diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt deleted file mode 100644 index c8c1e913f4e7..000000000000 --- a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt +++ /dev/null @@ -1,39 +0,0 @@ -GENI based Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI) - -The QUP v3 core is a GENI based AHB slave that provides a common data path -(an output FIFO and an input FIFO) for serial peripheral interface (SPI) -mini-core. - -SPI in master mode supports up to 50MHz, up to four chip selects, programmable -data path from 4 bits to 32 bits and numerous protocol variants. - -Required properties: -- compatible: Must contain "qcom,geni-spi". -- reg: Must contain SPI register location and length. -- interrupts: Must contain SPI controller interrupts. -- clock-names: Must contain "se". -- clocks: Serial engine core clock needed by the device. -- #address-cells: Must be <1> to define a chip select address on - the SPI bus. -- #size-cells: Must be <0>. - -SPI Controller nodes must be child of GENI based Qualcomm Universal -Peripharal. Please refer GENI based QUP wrapper controller node bindings -described in Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml. - -SPI slave nodes must be children of the SPI master node and conform to SPI bus -binding as described in Documentation/devicetree/bindings/spi/spi-bus.txt. - -Example: - spi0: spi@a84000 { - compatible = "qcom,geni-spi"; - reg = <0xa84000 0x4000>; - interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "se"; - clocks = <&clock_gcc GCC_QUPV3_WRAP0_S0_CLK>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&qup_1_spi_2_active>; - pinctrl-1 = <&qup_1_spi_2_sleep>; - #address-cells = <1>; - #size-cells = <0>; - }; diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml new file mode 100644 index 000000000000..e2c7b934c50d --- /dev/null +++ b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/qcom,spi-geni-qcom.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GENI based Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI) + +maintainers: + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + The QUP v3 core is a GENI based AHB slave that provides a common data path + (an output FIFO and an input FIFO) for serial peripheral interface (SPI) + mini-core. + + SPI in master mode supports up to 50MHz, up to four chip selects, + programmable data path from 4 bits to 32 bits and numerous protocol variants. + + SPI Controller nodes must be child of GENI based Qualcomm Universal + Peripharal. Please refer GENI based QUP wrapper controller node bindings + described in Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml. + +allOf: + - $ref: /schemas/spi/spi-controller.yaml# + +properties: + compatible: + const: qcom,geni-spi + + clocks: + maxItems: 1 + + clock-names: + const: se + + dmas: + maxItems: 2 + + dma-names: + items: + - const: tx + - const: rx + + interconnects: + maxItems: 2 + + interconnect-names: + items: + - const: qup-core + - const: qup-config + + interrupts: + maxItems: 1 + + operating-points-v2: true + + power-domains: + maxItems: 1 + + reg: + maxItems: 1 + +required: + - compatible + - clocks + - clock-names + - interrupts + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sc7180.h> + #include <dt-bindings/interconnect/qcom,sc7180.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0x00880000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi0_default>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + }; + + - | + #include <dt-bindings/dma/qcom-gpi.h> + + spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0x00884000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi1_default>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml index 142b2cb4504e..9c81d00b12e0 100644 --- a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml +++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml @@ -19,9 +19,20 @@ description: |+ properties: compatible: - enum: - - samsung,exynos4210-mct - - samsung,exynos4412-mct + oneOf: + - enum: + - samsung,exynos4210-mct + - samsung,exynos4412-mct + - items: + - enum: + - samsung,exynos3250-mct + - samsung,exynos5250-mct + - samsung,exynos5260-mct + - samsung,exynos5420-mct + - samsung,exynos5433-mct + - samsung,exynos850-mct + - tesla,fsd-mct + - const: samsung,exynos4210-mct clocks: maxItems: 2 @@ -62,6 +73,56 @@ required: - interrupts - reg +allOf: + - if: + properties: + compatible: + contains: + const: samsung,exynos3250-mct + then: + properties: + interrupts: + minItems: 8 + maxItems: 8 + + - if: + properties: + compatible: + contains: + const: samsung,exynos5250-mct + then: + properties: + interrupts: + minItems: 6 + maxItems: 6 + + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos5260-mct + - samsung,exynos5420-mct + - samsung,exynos5433-mct + - samsung,exynos850-mct + then: + properties: + interrupts: + minItems: 12 + maxItems: 12 + + - if: + properties: + compatible: + contains: + enum: + - tesla,fsd-mct + then: + properties: + interrupts: + minItems: 16 + maxItems: 16 + additionalProperties: false examples: |