diff options
author | Rabin Vincent | 2015-08-03 20:19:21 +0200 |
---|---|---|
committer | Jesper Nilsson | 2015-11-02 20:03:04 +0100 |
commit | a95b3ba2c322c3c373d34988d6928311b1b447a1 (patch) | |
tree | 608d4bc925d9f2980baba195ad03a55772bd61dd /arch/cris/boot | |
parent | d4dde7d21c4e243744d574ae38e2971be6a7a3a7 (diff) |
CRIS v32: dev88: add GPIO, LEDs, RTC, temp sensor
Add the GPIO driver to the device tree and, using it, support for the
LEDs and the RTC chip (via I2C-GPIO), as well as the temperature sensor
(via SPI-GPIO).
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jespern@axis.com>
Diffstat (limited to 'arch/cris/boot')
-rw-r--r-- | arch/cris/boot/dts/dev88.dts | 49 | ||||
-rw-r--r-- | arch/cris/boot/dts/etraxfs.dtsi | 8 |
2 files changed, 57 insertions, 0 deletions
diff --git a/arch/cris/boot/dts/dev88.dts b/arch/cris/boot/dts/dev88.dts index 4fa5a3f9d0ec..b9a230d10874 100644 --- a/arch/cris/boot/dts/dev88.dts +++ b/arch/cris/boot/dts/dev88.dts @@ -1,5 +1,7 @@ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> + /include/ "etraxfs.dtsi" / { @@ -15,4 +17,51 @@ status = "okay"; }; }; + + spi { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + gpio-sck = <&gio 1 0 0xd>; + gpio-miso = <&gio 4 0 0xd>; + gpio-mosi = <&gio 0 0 0xd>; + cs-gpios = <&gio 3 0 0xd>; + num-chipselects = <1>; + + temp-sensor@0 { + compatible = "ti,lm70"; + reg = <0>; + + spi-max-frequency = <100000>; + }; + }; + + i2c { + compatible = "i2c-gpio"; + gpios = <&gio 5 0 0xd>, <&gio 6 0 0xd>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + + leds { + compatible = "gpio-leds"; + + network { + label = "network"; + gpios = <&gio 2 GPIO_ACTIVE_LOW 0xa>; + }; + + status { + label = "status"; + gpios = <&gio 3 GPIO_ACTIVE_LOW 0xa>; + linux,default-trigger = "heartbeat"; + }; + }; }; diff --git a/arch/cris/boot/dts/etraxfs.dtsi b/arch/cris/boot/dts/etraxfs.dtsi index 909bcedc3565..bf1b8582d4d8 100644 --- a/arch/cris/boot/dts/etraxfs.dtsi +++ b/arch/cris/boot/dts/etraxfs.dtsi @@ -28,6 +28,14 @@ #interrupt-cells = <1>; }; + gio: gpio@b001a000 { + compatible = "axis,etraxfs-gio"; + reg = <0xb001a000 0x1000>; + interrupts = <50>; + gpio-controller; + #gpio-cells = <3>; + }; + serial@b00260000 { compatible = "axis,etraxfs-uart"; reg = <0xb0026000 0x1000>; |