[MIPS] DDB5477: Remove support

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

4 files changed, 0 insertions, 564 deletions

diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 8be9f2b9db26..4ee6800e67e6 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -19,7 +19,6 @@ obj-$(CONFIG_MARKEINS)		+= ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
 # These are still pretty much in the old state, watch, go blind.
 #
 obj-$(CONFIG_BASLER_EXCITE)	+= ops-titan.o pci-excite.o fixup-excite.o
-obj-$(CONFIG_DDB5477)		+= fixup-ddb5477.o pci-ddb5477.o ops-ddb5477.o
 obj-$(CONFIG_MIPS_ATLAS)	+= fixup-atlas.o
 obj-$(CONFIG_MIPS_COBALT)	+= fixup-cobalt.o
 obj-$(CONFIG_SOC_AU1500)	+= fixup-au1000.o ops-au1000.o
diff --git a/arch/mips/pci/fixup-ddb5477.c b/arch/mips/pci/fixup-ddb5477.c
deleted file mode 100644
index 2f1444e60654..000000000000
--- a/arch/mips/pci/fixup-ddb5477.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	Board specific pci fixups.
- *
- * Copyright 2001, 2002, 2003 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-static void ddb5477_fixup(struct pci_dev *dev)
-{
-	u8 old;
-
-	printk(KERN_NOTICE "Enabling ALI M1533/35 PS2 keyboard/mouse.\n");
-	pci_read_config_byte(dev, 0x41, &old);
-	pci_write_config_byte(dev, 0x41, old | 0xd0);
-}
-
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533,
-	  ddb5477_fixup);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1535,
-	  ddb5477_fixup);
-
-/*
- * Fixup baseboard AMD chip so that tx does not underflow.
- *      bcr_18 |= 0x0800
- * This sets NOUFLO bit which makes tx not start until whole pkt
- * is fetched to the chip.
- */
-#define PCNET32_WIO_RDP		0x10
-#define PCNET32_WIO_RAP		0x12
-#define PCNET32_WIO_RESET	0x14
-#define PCNET32_WIO_BDP		0x16
-
-static void ddb5477_amd_lance_fixup(struct pci_dev *dev)
-{
-	unsigned long ioaddr;
-	u16 temp;
-
-	ioaddr = pci_resource_start(dev, 0);
-
-	inw(ioaddr + PCNET32_WIO_RESET);	/* reset chip */
-
-	/* bcr_18 |= 0x0800 */
-	outw(18, ioaddr + PCNET32_WIO_RAP);
-	temp = inw(ioaddr + PCNET32_WIO_BDP);
-	temp |= 0x0800;
-	outw(18, ioaddr + PCNET32_WIO_RAP);
-	outw(temp, ioaddr + PCNET32_WIO_BDP);
-}
-
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LANCE,
-	  ddb5477_amd_lance_fixup);
diff --git a/arch/mips/pci/ops-ddb5477.c b/arch/mips/pci/ops-ddb5477.c
deleted file mode 100644
index 8e57d4c5d90f..000000000000
--- a/arch/mips/pci/ops-ddb5477.c
+++ /dev/null
@@ -1,278 +0,0 @@
-/***********************************************************************
- * Copyright 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * arch/mips/ddb5xxx/ddb5477/pci_ops.c
- *     Define the pci_ops for DB5477.
- *
- * Much of the code is derived from the original DDB5074 port by
- * Geert Uytterhoeven <geert@sonycom.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- ***********************************************************************
- */
-
-/*
- * DDB5477 has two PCI channels, external PCI and IOPIC (internal)
- * Therefore we provide two sets of pci_ops.
- */
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-#include <asm/addrspace.h>
-#include <asm/debug.h>
-
-#include <asm/ddb5xxx/ddb5xxx.h>
-
-/*
- * config_swap structure records what set of pdar/pmr are used
- * to access pci config space.  It also provides a place hold the
- * original values for future restoring.
- */
-struct pci_config_swap {
-	u32 pdar;
-	u32 pmr;
-	u32 config_base;
-	u32 config_size;
-	u32 pdar_backup;
-	u32 pmr_backup;
-};
-
-/*
- * On DDB5477, we have two sets of swap registers, for ext PCI and IOPCI.
- */
-struct pci_config_swap ext_pci_swap = {
-	DDB_PCIW0,
-	DDB_PCIINIT00,
-	DDB_PCI0_CONFIG_BASE,
-	DDB_PCI0_CONFIG_SIZE
-};
-struct pci_config_swap io_pci_swap = {
-	DDB_IOPCIW0,
-	DDB_PCIINIT01,
-	DDB_PCI1_CONFIG_BASE,
-	DDB_PCI1_CONFIG_SIZE
-};
-
-
-/*
- * access config space
- */
-static inline u32 ddb_access_config_base(struct pci_config_swap *swap, u32 bus,	/* 0 means top level bus */
-					 u32 slot_num)
-{
-	u32 pci_addr = 0;
-	u32 pciinit_offset = 0;
-	u32 virt_addr;
-	u32 option;
-
-	/* minimum pdar (window) size is 2MB */
-	db_assert(swap->config_size >= (2 << 20));
-
-	db_assert(slot_num < (1 << 5));
-	db_assert(bus < (1 << 8));
-
-	/* backup registers */
-	swap->pdar_backup = ddb_in32(swap->pdar);
-	swap->pmr_backup = ddb_in32(swap->pmr);
-
-	/* set the pdar (pci window) register */
-	ddb_set_pdar(swap->pdar, swap->config_base, swap->config_size, 32,	/* 32 bit wide */
-		     0,		/* not on local memory bus */
-		     0);	/* not visible from PCI bus (N/A) */
-
-	/*
-	 * calcuate the absolute pci config addr;
-	 * according to the spec, we start scanning from adr:11 (0x800)
-	 */
-	if (bus == 0) {
-		/* type 0 config */
-		pci_addr = 0x800 << slot_num;
-	} else {
-		/* type 1 config */
-		pci_addr = (bus << 16) | (slot_num << 11);
-	}
-
-	/*
-	 * if pci_addr is less than pci config window size,  we set
-	 * pciinit_offset to 0 and adjust the virt_address.
-	 * Otherwise we will try to adjust pciinit_offset.
-	 */
-	if (pci_addr < swap->config_size) {
-		virt_addr = KSEG1ADDR(swap->config_base + pci_addr);
-		pciinit_offset = 0;
-	} else {
-		db_assert((pci_addr & (swap->config_size - 1)) == 0);
-		virt_addr = KSEG1ADDR(swap->config_base);
-		pciinit_offset = pci_addr;
-	}
-
-	/* set the pmr register */
-	option = DDB_PCI_ACCESS_32;
-	if (bus != 0)
-		option |= DDB_PCI_CFGTYPE1;
-	ddb_set_pmr(swap->pmr, DDB_PCICMD_CFG, pciinit_offset, option);
-
-	return virt_addr;
-}
-
-static inline void ddb_close_config_base(struct pci_config_swap *swap)
-{
-	ddb_out32(swap->pdar, swap->pdar_backup);
-	ddb_out32(swap->pmr, swap->pmr_backup);
-}
-
-static int read_config_dword(struct pci_config_swap *swap,
-			     struct pci_bus *bus, u32 devfn, u32 where,
-			     u32 * val)
-{
-	u32 bus_num, slot_num, func_num;
-	u32 base;
-
-	db_assert((where & 3) == 0);
-	db_assert(where < (1 << 8));
-
-	/* check if the bus is top-level */
-	if (bus->parent != NULL) {
-		bus_num = bus->number;
-		db_assert(bus_num != 0);
-	} else {
-		bus_num = 0;
-	}
-
-	slot_num = PCI_SLOT(devfn);
-	func_num = PCI_FUNC(devfn);
-	base = ddb_access_config_base(swap, bus_num, slot_num);
-	*val = *(volatile u32 *) (base + (func_num << 8) + where);
-	ddb_close_config_base(swap);
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int read_config_word(struct pci_config_swap *swap,
-			    struct pci_bus *bus, u32 devfn, u32 where,
-			    u16 * val)
-{
-	int status;
-	u32 result;
-
-	db_assert((where & 1) == 0);
-
-	status = read_config_dword(swap, bus, devfn, where & ~3, &result);
-	if (where & 2)
-		result >>= 16;
-	*val = result & 0xffff;
-	return status;
-}
-
-static int read_config_byte(struct pci_config_swap *swap,
-			    struct pci_bus *bus, u32 devfn, u32 where,
-			    u8 * val)
-{
-	int status;
-	u32 result;
-
-	status = read_config_dword(swap, bus, devfn, where & ~3, &result);
-	if (where & 1)
-		result >>= 8;
-	if (where & 2)
-		result >>= 16;
-	*val = result & 0xff;
-
-	return status;
-}
-
-static int write_config_dword(struct pci_config_swap *swap,
-			      struct pci_bus *bus, u32 devfn, u32 where,
-			      u32 val)
-{
-	u32 bus_num, slot_num, func_num;
-	u32 base;
-
-	db_assert((where & 3) == 0);
-	db_assert(where < (1 << 8));
-
-	/* check if the bus is top-level */
-	if (bus->parent != NULL) {
-		bus_num = bus->number;
-		db_assert(bus_num != 0);
-	} else {
-		bus_num = 0;
-	}
-
-	slot_num = PCI_SLOT(devfn);
-	func_num = PCI_FUNC(devfn);
-	base = ddb_access_config_base(swap, bus_num, slot_num);
-	*(volatile u32 *) (base + (func_num << 8) + where) = val;
-	ddb_close_config_base(swap);
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int write_config_word(struct pci_config_swap *swap,
-			     struct pci_bus *bus, u32 devfn, u32 where, u16 val)
-{
-	int status, shift = 0;
-	u32 result;
-
-	db_assert((where & 1) == 0);
-
-	status = read_config_dword(swap, bus, devfn, where & ~3, &result);
-	if (status != PCIBIOS_SUCCESSFUL)
-		return status;
-
-	if (where & 2)
-		shift += 16;
-	result &= ~(0xffff << shift);
-	result |= val << shift;
-	return write_config_dword(swap, bus, devfn, where & ~3, result);
-}
-
-static int write_config_byte(struct pci_config_swap *swap,
-			     struct pci_bus *bus, u32 devfn, u32 where, u8 val)
-{
-	int status, shift = 0;
-	u32 result;
-
-	status = read_config_dword(swap, bus, devfn, where & ~3, &result);
-	if (status != PCIBIOS_SUCCESSFUL)
-		return status;
-
-	if (where & 2)
-		shift += 16;
-	if (where & 1)
-		shift += 8;
-	result &= ~(0xff << shift);
-	result |= val << shift;
-	return write_config_dword(swap, bus, devfn, where & ~3, result);
-}
-
-#define        MAKE_PCI_OPS(prefix, rw, pciswap, star) \
-static int prefix##_##rw##_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 star val) \
-{ \
-	if (size == 1) \
-		return rw##_config_byte(pciswap, bus, devfn, where, (u8 star)val); \
-	else if (size == 2) \
-		return rw##_config_word(pciswap, bus, devfn, where, (u16 star)val); \
-	/* Size must be 4 */ \
-     	return rw##_config_dword(pciswap, bus, devfn, where, val); \
-}
-
-MAKE_PCI_OPS(extpci, read, &ext_pci_swap, *)
-MAKE_PCI_OPS(extpci, write, &ext_pci_swap,)
-
-MAKE_PCI_OPS(iopci, read, &io_pci_swap, *)
-MAKE_PCI_OPS(iopci, write, &io_pci_swap,)
-
-struct pci_ops ddb5477_ext_pci_ops = {
-	.read = extpci_read_config,
-	.write = extpci_write_config
-};
-
-
-struct pci_ops ddb5477_io_pci_ops = {
-	.read = iopci_read_config,
-	.write = iopci_write_config
-};
diff --git a/arch/mips/pci/pci-ddb5477.c b/arch/mips/pci/pci-ddb5477.c
deleted file mode 100644
index 7363e1877842..000000000000
--- a/arch/mips/pci/pci-ddb5477.c
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * PCI code for DDB5477.
- *
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-
-#include <asm/bootinfo.h>
-#include <asm/debug.h>
-
-#include <asm/ddb5xxx/ddb5xxx.h>
-
-static struct resource extpci_io_resource = {
-	.start	= DDB_PCI0_IO_BASE - DDB_PCI_IO_BASE + 0x4000,
-	.end	= DDB_PCI0_IO_BASE - DDB_PCI_IO_BASE + DDB_PCI0_IO_SIZE - 1,
-	.name	= "ext pci IO space",
-	.flags	= IORESOURCE_IO
-};
-
-static struct resource extpci_mem_resource = {
-	.start	= DDB_PCI0_MEM_BASE + 0x100000,
-	.end	= DDB_PCI0_MEM_BASE + DDB_PCI0_MEM_SIZE - 1,
-	.name	= "ext pci memory space",
-	.flags	= IORESOURCE_MEM
-};
-
-static struct resource iopci_io_resource = {
-	.start	= DDB_PCI1_IO_BASE - DDB_PCI_IO_BASE,
-	.end	= DDB_PCI1_IO_BASE - DDB_PCI_IO_BASE + DDB_PCI1_IO_SIZE - 1,
-	.name	= "io pci IO space",
-	.flags	= IORESOURCE_IO
-};
-
-static struct resource iopci_mem_resource = {
-	.start	= DDB_PCI1_MEM_BASE,
-	.end	= DDB_PCI1_MEM_BASE + DDB_PCI1_MEM_SIZE - 1,
-	.name	= "ext pci memory space",
-	.flags	= IORESOURCE_MEM
-};
-
-extern struct pci_ops ddb5477_ext_pci_ops;
-extern struct pci_ops ddb5477_io_pci_ops;
-
-struct pci_controller ddb5477_ext_controller = {
-	.pci_ops	= &ddb5477_ext_pci_ops,
-	.io_resource	= &extpci_io_resource,
-	.mem_resource	= &extpci_mem_resource
-};
-
-struct pci_controller ddb5477_io_controller = {
-	.pci_ops	= &ddb5477_io_pci_ops,
-	.io_resource	= &iopci_io_resource,
-	.mem_resource	= &iopci_mem_resource
-};
-
-
-
-/*
- * we fix up irqs based on the slot number.
- * The first entry is at AD:11.
- * Fortunately this works because, although we have two pci buses,
- * they all have different slot numbers (except for rockhopper slot 20
- * which is handled below).
- *
- */
-
-/*
- * irq mapping : device -> pci int # -> vrc4377 irq# ,
- * ddb5477 board manual page 4  and vrc5477 manual page 46
- */
-
-/*
- * based on ddb5477 manual page 11
- */
-#define		MAX_SLOT_NUM		21
-static unsigned char irq_map[MAX_SLOT_NUM] = {
-	/* SLOT:  0, AD:11 */ 0xff,
-	/* SLOT:  1, AD:12 */ 0xff,
-	/* SLOT:  2, AD:13 */ 0xff,
-	/* SLOT:  3, AD:14 */ 0xff,
-	/* SLOT:  4, AD:15 */ VRC5477_IRQ_INTA, /* onboard tulip */
-	/* SLOT:  5, AD:16 */ VRC5477_IRQ_INTB, /* slot 1 */
-	/* SLOT:  6, AD:17 */ VRC5477_IRQ_INTC, /* slot 2 */
-	/* SLOT:  7, AD:18 */ VRC5477_IRQ_INTD, /* slot 3 */
-	/* SLOT:  8, AD:19 */ VRC5477_IRQ_INTE, /* slot 4 */
-	/* SLOT:  9, AD:20 */ 0xff,
-	/* SLOT: 10, AD:21 */ 0xff,
-	/* SLOT: 11, AD:22 */ 0xff,
-	/* SLOT: 12, AD:23 */ 0xff,
-	/* SLOT: 13, AD:24 */ 0xff,
-	/* SLOT: 14, AD:25 */ 0xff,
-	/* SLOT: 15, AD:26 */ 0xff,
-	/* SLOT: 16, AD:27 */ 0xff,
-	/* SLOT: 17, AD:28 */ 0xff,
-	/* SLOT: 18, AD:29 */ VRC5477_IRQ_IOPCI_INTC, /* vrc5477 ac97 */
-	/* SLOT: 19, AD:30 */ VRC5477_IRQ_IOPCI_INTB, /* vrc5477 usb peri */
-	/* SLOT: 20, AD:31 */ VRC5477_IRQ_IOPCI_INTA, /* vrc5477 usb host */
-};
-static unsigned char rockhopperII_irq_map[MAX_SLOT_NUM] = {
-	/* SLOT:  0, AD:11 */ 0xff,
-	/* SLOT:  1, AD:12 */ VRC5477_IRQ_INTB, /* onboard AMD PCNET */
-	/* SLOT:  2, AD:13 */ 0xff,
-	/* SLOT:  3, AD:14 */ 0xff,
-	/* SLOT:  4, AD:15 */ 14, /* M5229 ide ISA irq */
-	/* SLOT:  5, AD:16 */ VRC5477_IRQ_INTD, /* slot 3 */
-	/* SLOT:  6, AD:17 */ VRC5477_IRQ_INTA, /* slot 4 */
-	/* SLOT:  7, AD:18 */ VRC5477_IRQ_INTD, /* slot 5 */
-	/* SLOT:  8, AD:19 */ 0, /* M5457 modem nop */
-	/* SLOT:  9, AD:20 */ VRC5477_IRQ_INTA, /* slot 2 */
-	/* SLOT: 10, AD:21 */ 0xff,
-	/* SLOT: 11, AD:22 */ 0xff,
-	/* SLOT: 12, AD:23 */ 0xff,
-	/* SLOT: 13, AD:24 */ 0xff,
-	/* SLOT: 14, AD:25 */ 0xff,
-	/* SLOT: 15, AD:26 */ 0xff,
-	/* SLOT: 16, AD:27 */ 0xff,
-	/* SLOT: 17, AD:28 */ 0, /* M7101 PMU nop */
-	/* SLOT: 18, AD:29 */ VRC5477_IRQ_IOPCI_INTC, /* vrc5477 ac97 */
-	/* SLOT: 19, AD:30 */ VRC5477_IRQ_IOPCI_INTB, /* vrc5477 usb peri */
-	/* SLOT: 20, AD:31 */ VRC5477_IRQ_IOPCI_INTA, /* vrc5477 usb host */
-};
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int slot_num;
-	unsigned char *slot_irq_map;
-	unsigned char irq;
-
-	/*
-	 * We ignore the swizzled slot and pin values.  The original
-	 * pci_fixup_irq() codes largely base irq number on the dev slot
-	 * numbers because except for one case they are unique even
-	 * though there are multiple pci buses.
-	 */
-
-	if (mips_machtype == MACH_NEC_ROCKHOPPERII)
-		slot_irq_map = rockhopperII_irq_map;
-	else
-		slot_irq_map = irq_map;
-
-	slot_num = PCI_SLOT(dev->devfn);
-	irq = slot_irq_map[slot_num];
-
-	db_assert(slot_num < MAX_SLOT_NUM);
-
-	db_assert(irq != 0xff);
-
-	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
-
-	if (mips_machtype == MACH_NEC_ROCKHOPPERII) {
-		/* hack to distinquish overlapping slot 20s, one
-		 * on bus 0 (ALI USB on the M1535 on the backplane),
-		 * and one on bus 2 (NEC USB controller on the CPU board)
-		 * Make the M1535 USB - ISA IRQ number 9.
-		 */
-		if (slot_num == 20 && dev->bus->number == 0) {
-			pci_write_config_byte(dev,
-					      PCI_INTERRUPT_LINE,
-					      9);
-			irq = 9;
-		}
-
-	}
-
-	return irq;
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	return 0;
-}
-
-void ddb_pci_reset_bus(void)
-{
-	u32 temp;
-
-	/*
-	 * I am not sure about the "official" procedure, the following
-	 * steps work as far as I know:
-	 * We first set PCI cold reset bit (bit 31) in PCICTRL-H.
-	 * Then we clear the PCI warm reset bit (bit 30) to 0 in PCICTRL-H.
-	 * The same is true for both PCI channels.
-	 */
-	temp = ddb_in32(DDB_PCICTL0_H);
-	temp |= 0x80000000;
-	ddb_out32(DDB_PCICTL0_H, temp);
-	temp &= ~0xc0000000;
-	ddb_out32(DDB_PCICTL0_H, temp);
-
-	temp = ddb_in32(DDB_PCICTL1_H);
-	temp |= 0x80000000;
-	ddb_out32(DDB_PCICTL1_H, temp);
-	temp &= ~0xc0000000;
-	ddb_out32(DDB_PCICTL1_H, temp);
-}