diff options
| author | Linus Torvalds | 2018-06-11 17:57:38 -0700 |
|---|---|---|
| committer | Linus Torvalds | 2018-06-11 17:57:38 -0700 |
| commit | 721afaa2aeb860067decdddadc84ed16f42f2048 (patch) | |
| tree | c529f0aaaa6653ff3cb6fd1bae90faeddbc1f715 /arch | |
| parent | 7c00e8ae041b349992047769af741b67379ce19a (diff) | |
| parent | 87815dda55934180d8e6ec0a0a448b104d251c54 (diff) | |
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC device tree updates from Olof Johansson:
"As always, a large number of DT updates. Too many to enumerate them
all, but at a glance:
New SoCs introduced in this release:
- Amlogic:
+ Meson 8M2 SoC, a.k.a. S812. A quad Cortex-A9 SoC used in some
set top boxes and other products.
- Mediatek:
+ MT7623A, which is a flavor of the MT7623 family with other
on-chip ethernet options.
- Qualcomm:
+ SDM845, a.k.a Snapdragon 845, an 4+4-core Kryo 385/845
(Cortex-A75/A55 derivative) SoC that's one of the current
high-end mobile SoCs.
It's great to see mainline support for it. So far, you can't do
much with it, since a lot of peripherals are not yet in the DTs
but driver support for USB, GPU and other pieces are starting to
trickle in. This might end up being a well-supported SoC
upstream if the momentum keeps up.
- Renesas:
+ R8A77990, a.k.a R-Car E3, a new automotive
entertainment-targeted SoC. Currently only one Cortex-A53 CPU is
enabled, we are eagerly awaiting more. So far, basic drivers
such as serial, gpios, PMU and ethernet are enabled.
+ R8A77470, a.k.a. RZ/G1C, a new dual Cortex-A7 SoC with PowerVR
GPU. Same here, basic set of drivers such as serial, gpios and
ethernet enabled, and SMP support is also forthcoming.
- STMicroelectronics:
+ STM32F469, very similar tih STM32F429 but with display support
Enhancements to SoCs/platforms (DTS contents, some driver portions
might not be in yet):
- Allwinner sun8i (h3/a33/a83t) SMP, DVFS tweaks, misc
- Amlogic Meson: I2C, UFS, TDM, GPIO external interrupts, MMC resets
- Hisilicon hi3660: Thermal cooling, CPU frequency scaling, mailbox interfaces
- Marvell Berlin2CD: SMP support, thermal sensors
- Mediatek MT7623: Highspeed DMA, audio support
- Qualcomm IPQ8074 PCIe support, MSM8996 UFS support
- Renesas: Watchdog and PMU support across many platforms
- Rockchip RK3399: USB3 OTG support
- Samsung Exynos: Audio-over-HDMI on Odroid X/X2/U3
- STMicro STM32: Lots of peripherals added to STM32MP175C
- Uniphier: Ethernet support
New boards:
- Allwinner A20: Olimex A20-SOM-EVB-eMMC variant
- Allwinner H2+: Libre Computer ALL-H3-CC (h2+ version)
- Allwinner A33: Nintendo NES/SuperNES Classic Edition
- Aspeed: S2600WF, Inventec Lanyang BMC, Portwell Neptune
- Berlin2CD: Valve Steam Link
- Broadcom BCM5301X: Luxul XAP-1610 and XWR-3150 V1
- Broadcom: Raspberry Pi 3 B+
- Mediatek MT7623N and MT7623A: reference boards
- Meson 8M2: Tronsmart MXIII Plus
- NXP i.MX: Engicam i.CoreM6, DHCOM iMX6 SOM, BTicino i.MX6DL Mamoj
- Qualcomm MSM8974: Sony Xperia Z1 Compact support
- Qualcomm SDM845: MTP development board
- Renesas: Ebisu R8A77990 board
- Renesas RZ/G1C: iwg23s: iWave G235-SDB
- TI am335x: Pocketbeagle support"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (448 commits)
ARM: dts: aspeed: Fix hwrng register address
arm64: dts: sprd: whale2: Add the rtc enable clock for watchdog
arm64: dts: sprd: Add GPIO and GPIO keys device nodes
arm64: dts: sprd: fix typo in 'remote-endpoint'
arm64: dts: apq8096-db820c: Removed bt-en-1-8v regulator
arm64: dts: fix regulator property name for wlan pcie endpoint
arm64: dts: qcom: msm8996: Use UFS_GDSC for UFS
ARM: dts: pxa3xx: fix MMC clocks
ARM: pxa: dts: add pin definitions for extended GPIOs
ARM: pxa: dts: add gpio-ranges to gpio controller
ARM: dts: ipq8074: Enable few peripherals for hk01 board
ARM: dts: ipq8074: Add pcie nodes
ARM: dts: ipq8074: Add peripheral nodes
ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c2 board file
ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board file
ARM: dts: ipq4019: Add ipq4019-ap.dk07.1 common data
ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk04.1-c3 board file
ARM: dts: ipq4019: Add ipq4019-ap.dk04.1-c1 board file
ARM: dts: ipq4019: Add ipq4019-ap.dk04.dtsi
ARM: dts: ipq4019: Change the max opp frequency
...
Diffstat (limited to 'arch')
468 files changed, 16653 insertions, 6097 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 7e2424957809..19124f0efe60 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -75,6 +75,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ bcm2835-rpi-a-plus.dtb \ bcm2836-rpi-2-b.dtb \ bcm2837-rpi-3-b.dtb \ + bcm2837-rpi-3-b-plus.dtb \ bcm2835-rpi-zero.dtb \ bcm2835-rpi-zero-w.dtb dtb-$(CONFIG_ARCH_BCM_5301X) += \ @@ -102,8 +103,10 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm47094-dlink-dir-885l.dtb \ bcm47094-linksys-panamera.dtb \ bcm47094-luxul-abr-4500.dtb \ + bcm47094-luxul-xap-1610.dtb \ bcm47094-luxul-xbr-4500.dtb \ bcm47094-luxul-xwr-3100.dtb \ + bcm47094-luxul-xwr-3150-v1.dtb \ bcm47094-netgear-r8500.dtb \ bcm94708.dtb \ bcm94709.dtb \ @@ -140,6 +143,7 @@ dtb-$(CONFIG_ARCH_BCM_NSP) += \ dtb-$(CONFIG_ARCH_BERLIN) += \ berlin2-sony-nsz-gs7.dtb \ berlin2cd-google-chromecast.dtb \ + berlin2cd-valve-steamlink.dtb \ berlin2q-marvell-dmp.dtb dtb-$(CONFIG_ARCH_BRCMSTB) += \ bcm7445-bcm97445svmb.dtb @@ -190,8 +194,6 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \ exynos5422-odroidxu3.dtb \ exynos5422-odroidxu3-lite.dtb \ exynos5422-odroidxu4.dtb \ - exynos5440-sd5v1.dtb \ - exynos5440-ssdk5440.dtb \ exynos5800-peach-pi.dtb dtb-$(CONFIG_ARCH_GEMINI) += \ gemini-dlink-dir-685.dtb \ @@ -312,14 +314,14 @@ dtb-$(CONFIG_ARCH_NPCM7XX) += \ dtb-$(CONFIG_MACH_MESON6) += \ meson6-atv1200.dtb dtb-$(CONFIG_MACH_MESON8) += \ - meson8-minix-neo-x8.dtb + meson8-minix-neo-x8.dtb \ + meson8b-mxq.dtb \ + meson8b-odroidc1.dtb \ + meson8m2-mxiii-plus.dtb dtb-$(CONFIG_ARCH_MMP) += \ pxa168-aspenite.dtb \ pxa910-dkb.dtb \ mmp2-brownstone.dtb -dtb-$(CONFIG_MACH_MESON8B) += \ - meson8b-mxq.dtb \ - meson8b-odroidc1.dtb dtb-$(CONFIG_ARCH_MPS2) += \ mps2-an385.dtb \ mps2-an399.dtb @@ -399,6 +401,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-hummingboard2-som-v15.dtb \ imx6dl-icore.dtb \ imx6dl-icore-rqs.dtb \ + imx6dl-mamoj.dtb \ imx6dl-nit6xlite.dtb \ imx6dl-nitrogen6x.dtb \ imx6dl-phytec-mira-rdk-nand.dtb \ @@ -439,6 +442,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-cubox-i-emmc-som-v15.dtb \ imx6q-cubox-i-som-v15.dtb \ imx6q-dfi-fs700-m60.dtb \ + imx6q-dhcom-pdk2.dtb \ imx6q-display5-tianma-tm070-1280x768.dtb \ imx6q-dmo-edmqmx6.dtb \ imx6q-dms-ba16.dtb \ @@ -463,9 +467,11 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-hummingboard2-emmc-som-v15.dtb \ imx6q-hummingboard2-som-v15.dtb \ imx6q-icore.dtb \ + imx6q-icore-mipi.dtb \ imx6q-icore-ofcap10.dtb \ imx6q-icore-ofcap12.dtb \ imx6q-icore-rqs.dtb \ + imx6q-kp-tpc.dtb \ imx6q-marsboard.dtb \ imx6q-mccmon6.dtb \ imx6q-nitrogen6x.dtb \ @@ -688,6 +694,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-pdu001.dtb \ am335x-pepper.dtb \ am335x-phycore-rdk.dtb \ + am335x-pocketbeagle.dtb \ am335x-shc.dtb \ am335x-sbc-t335.dtb \ am335x-sl50.dtb \ @@ -760,12 +767,17 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8084-ifc6540.dtb \ qcom-apq8084-mtp.dtb \ qcom-ipq4019-ap.dk01.1-c1.dtb \ + qcom-ipq4019-ap.dk04.1-c1.dtb \ + qcom-ipq4019-ap.dk04.1-c3.dtb \ + qcom-ipq4019-ap.dk07.1-c1.dtb \ + qcom-ipq4019-ap.dk07.1-c2.dtb \ qcom-ipq8064-ap148.dtb \ qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb \ qcom-msm8974-fairphone-fp2.dtb \ qcom-msm8974-lge-nexus5-hammerhead.dtb \ qcom-msm8974-samsung-klte.dtb \ + qcom-msm8974-sony-xperia-amami.dtb \ qcom-msm8974-sony-xperia-castor.dtb \ qcom-msm8974-sony-xperia-honami.dtb \ qcom-mdm9615-wp8548-mangoh-green.dtb @@ -959,6 +971,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-m3.dtb \ sun7i-a20-mk808c.dtb \ sun7i-a20-olimex-som-evb.dtb \ + sun7i-a20-olimex-som-evb-emmc.dtb \ sun7i-a20-olimex-som204-evb.dtb \ sun7i-a20-olimex-som204-evb-emmc.dtb \ sun7i-a20-olinuxino-lime.dtb \ @@ -992,8 +1005,9 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a83t-bananapi-m3.dtb \ sun8i-a83t-cubietruck-plus.dtb \ sun8i-a83t-tbs-a711.dtb \ - sun8i-h2-plus-orangepi-r1.dtb \ sun8i-h2-plus-bananapi-m2-zero.dtb \ + sun8i-h2-plus-libretech-all-h3-cc.dtb \ + sun8i-h2-plus-orangepi-r1.dtb \ sun8i-h2-plus-orangepi-zero.dtb \ sun8i-h3-bananapi-m2-plus.dtb \ sun8i-h3-beelink-x2.dtb \ @@ -1010,6 +1024,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-h3-orangepi-plus.dtb \ sun8i-h3-orangepi-plus2e.dtb \ sun8i-r16-bananapi-m2m.dtb \ + sun8i-r16-nintendo-nes-classic.dtb \ + sun8i-r16-nintendo-super-nes-classic.dtb \ sun8i-r16-parrot.dtb \ sun8i-r40-bananapi-m2-ultra.dtb \ sun8i-v3s-licheepi-zero.dtb \ @@ -1054,9 +1070,7 @@ dtb-$(CONFIG_ARCH_U8500) += \ ste-hrefprev60-stuib.dtb \ ste-hrefprev60-tvk.dtb \ ste-hrefv60plus-stuib.dtb \ - ste-hrefv60plus-tvk.dtb \ - ste-ccu8540.dtb \ - ste-ccu9540.dtb + ste-hrefv60plus-tvk.dtb dtb-$(CONFIG_ARCH_UNIPHIER) += \ uniphier-ld4-ref.dtb \ uniphier-ld6b-ref.dtb \ @@ -1150,6 +1164,9 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ mt6580-evbp1.dtb \ mt6589-aquaris5.dtb \ mt6592-evb.dtb \ + mt7623a-rfb-emmc.dtb \ + mt7623a-rfb-nand.dtb \ + mt7623n-rfb-emmc.dtb \ mt7623n-rfb-nand.dtb \ mt7623n-bananapi-bpi-r2.dtb \ mt8127-moose.dtb \ @@ -1158,8 +1175,11 @@ dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-ast2500-evb.dtb \ aspeed-bmc-arm-centriq2400-rep.dtb \ + aspeed-bmc-intel-s2600wf.dtb \ + aspeed-bmc-opp-lanyang.dtb \ aspeed-bmc-opp-palmetto.dtb \ aspeed-bmc-opp-romulus.dtb \ aspeed-bmc-opp-witherspoon.dtb \ aspeed-bmc-opp-zaius.dtb \ + aspeed-bmc-portwell-neptune.dtb \ aspeed-bmc-quanta-q71l.dtb diff --git a/arch/arm/boot/dts/am335x-baltos-ir3220.dts b/arch/arm/boot/dts/am335x-baltos-ir3220.dts index 46df1b22022c..1b215c425c57 100644 --- a/arch/arm/boot/dts/am335x-baltos-ir3220.dts +++ b/arch/arm/boot/dts/am335x-baltos-ir3220.dts @@ -85,7 +85,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-parent = <&gpio0>; - interrupts = <20 GPIO_ACTIVE_LOW>; + interrupts = <20 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&tca6416_pins>; }; diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts index 5d56355ba040..832ead864dc5 100644 --- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts +++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts @@ -94,7 +94,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-parent = <&gpio0>; - interrupts = <20 GPIO_ACTIVE_LOW>; + interrupts = <20 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&tca6416_pins>; }; diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi index ec6052c521ef..ed7a5a3daa42 100644 --- a/arch/arm/boot/dts/am335x-baltos.dtsi +++ b/arch/arm/boot/dts/am335x-baltos.dtsi @@ -249,7 +249,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-parent = <&gpio1>; - interrupts = <28 GPIO_ACTIVE_LOW>; + interrupts = <28 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&tps65910_pins>; }; diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index e67b4d65c8d0..f9e8667f5886 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -161,7 +161,14 @@ mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* GPIO0_6 */ + AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spio0_cs1.gpio0_6 */ + AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ + AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ + AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ + AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ + AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ + AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ + AM33XX_IOPAD(0x9a0, PIN_INPUT | MUX_MODE4) /* mcasp0_aclkr.mmc0_sdwp */ >; }; diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts index 58baee158e64..7bcd72691f06 100644 --- a/arch/arm/boot/dts/am335x-boneblue.dts +++ b/arch/arm/boot/dts/am335x-boneblue.dts @@ -364,7 +364,7 @@ compatible = "invensense,mpu9250"; reg = <0x68>; interrupt-parent = <&gpio3>; - interrupts = <21 GPIO_ACTIVE_LOW>; + interrupts = <21 IRQ_TYPE_EDGE_RISING>; i2c-gate { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index fee6b3ee1741..1356fd6f8da3 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -303,7 +303,14 @@ mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ + AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ + AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ + AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ + AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ + AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ + AM33XX_IOPAD(0x9a0, PIN_INPUT | MUX_MODE4) /* mcasp0_aclkr.mmc0_sdwp */ >; }; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index fa608cd5dc14..0c096a795e37 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -137,7 +137,7 @@ }; }; - backlight { + lcd_bl: backlight { compatible = "pwm-backlight"; pwms = <&ecap2 0 50000 PWM_POLARITY_INVERTED>; brightness-levels = <0 58 61 66 75 90 125 170 255>; @@ -172,6 +172,7 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&lcd_pins_default>; pinctrl-1 = <&lcd_pins_sleep>; + backlight = <&lcd_bl>; status = "okay"; panel-info { ac-bias = <255>; @@ -399,7 +400,14 @@ mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ + AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ + AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ + AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ + AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ + AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ + AM33XX_IOPAD(0x9a0, PIN_INPUT | MUX_MODE4) /* mcasp0_aclkr.mmc0_sdwp */ >; }; diff --git a/arch/arm/boot/dts/am335x-osd335x-common.dtsi b/arch/arm/boot/dts/am335x-osd335x-common.dtsi new file mode 100644 index 000000000000..f8ff473f94f0 --- /dev/null +++ b/arch/arm/boot/dts/am335x-osd335x-common.dtsi @@ -0,0 +1,124 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * Author: Robert Nelson <robertcnelson@gmail.com> + */ + +/ { + cpus { + cpu@0 { + cpu0-supply = <&dcdc2_reg>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; +}; + +&cpu0_opp_table { + /* + * Octavo Systems: + * The EFUSE_SMA register is not programmed for any of the AM335x wafers + * we get and we are not programming them during our production test. + * Therefore, from a DEVICE_ID revision point of view, the silicon looks + * like it is Revision 2.1. However, from an EFUSE_SMA point of view for + * the HW OPP table, the silicon looks like it is Revision 1.0 (ie the + * EFUSE_SMA register reads as all zeros). + */ + oppnitro-1000000000 { + opp-supported-hw = <0x06 0x0100>; + }; +}; + +&am33xx_pinmux { + i2c0_pins: pinmux-i2c0-pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* (C17) I2C0_SDA.I2C0_SDA */ + AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* (C16) I2C0_SCL.I2C0_SCL */ + >; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + status = "okay"; + clock-frequency = <400000>; + + tps: tps@24 { + reg = <0x24>; + }; +}; + +/include/ "tps65217.dtsi" + +&tps { + interrupts = <7>; /* NMI */ + interrupt-parent = <&intc>; + + ti,pmic-shutdown-controller; + + pwrbutton { + interrupts = <2>; + status = "okay"; + }; + + regulators { + dcdc1_reg: regulator@0 { + regulator-name = "vdds_dpr"; + regulator-always-on; + }; + + dcdc2_reg: regulator@1 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1351500>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3_reg: regulator@2 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: regulator@3 { + regulator-name = "vio,vrtc,vdds"; + regulator-always-on; + }; + + ldo2_reg: regulator@4 { + regulator-name = "vdd_3v3aux"; + regulator-always-on; + }; + + ldo3_reg: regulator@5 { + regulator-name = "vdd_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: regulator@6 { + regulator-name = "vdd_3v3a"; + regulator-always-on; + }; + }; +}; + +&aes { + status = "okay"; +}; + +&sham { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-pocketbeagle.dts b/arch/arm/boot/dts/am335x-pocketbeagle.dts new file mode 100644 index 000000000000..62fe5cab9fae --- /dev/null +++ b/arch/arm/boot/dts/am335x-pocketbeagle.dts @@ -0,0 +1,237 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * Author: Robert Nelson <robertcnelson@gmail.com> + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-osd335x-common.dtsi" + +/ { + model = "TI AM335x PocketBeagle"; + compatible = "ti,am335x-pocketbeagle", "ti,am335x-bone", "ti,am33xx"; + + chosen { + stdout-path = &uart0; + }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&usr_leds_pins>; + + compatible = "gpio-leds"; + + usr0 { + label = "beaglebone:green:usr0"; + gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + usr1 { + label = "beaglebone:green:usr1"; + gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + usr2 { + label = "beaglebone:green:usr2"; + gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + + usr3 { + label = "beaglebone:green:usr3"; + gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + vmmcsd_fixed: fixedregulator0 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&am33xx_pinmux { + i2c2_pins: pinmux-i2c2-pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* (D17) uart1_rtsn.I2C2_SCL */ + AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* (D18) uart1_ctsn.I2C2_SDA */ + >; + }; + + ehrpwm0_pins: pinmux-ehrpwm0-pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* (A13) mcasp0_aclkx.ehrpwm0A */ + >; + }; + + ehrpwm1_pins: pinmux-ehrpwm1-pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* (U14) gpmc_a2.ehrpwm1A */ + >; + }; + + mmc0_pins: pinmux-mmc0-pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */ + AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* (G16) mmc0_dat0.mmc0_dat0 */ + AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* (G15) mmc0_dat1.mmc0_dat1 */ + AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* (F18) mmc0_dat2.mmc0_dat2 */ + AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* (F17) mmc0_dat3.mmc0_dat3 */ + AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* (G18) mmc0_cmd.mmc0_cmd */ + AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* (G17) mmc0_clk.mmc0_clk */ + AM33XX_IOPAD(0x9a0, PIN_INPUT | MUX_MODE4) /* (B12) mcasp0_aclkr.mmc0_sdwp */ + >; + }; + + spi0_pins: pinmux-spi0-pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* (A17) spi0_sclk.spi0_sclk */ + AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* (B17) spi0_d0.spi0_d0 */ + AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* (B16) spi0_d1.spi0_d1 */ + AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* (A16) spi0_cs0.spi0_cs0 */ + >; + }; + + spi1_pins: pinmux-spi1-pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x964, PIN_INPUT_PULLUP | MUX_MODE4) /* (C18) eCAP0_in_PWM0_out.spi1_sclk */ + AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE4) /* (E18) uart0_ctsn.spi1_d0 */ + AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE4) /* (E17) uart0_rtsn.spi1_d1 */ + AM33XX_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE4) /* (A15) xdma_event_intr0.spi1_cs1 */ + >; + }; + + usr_leds_pins: pinmux-usr-leds-pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7) /* (V15) gpmc_a5.gpio1[21] - USR_LED_0 */ + AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7) /* (U15) gpmc_a6.gpio1[22] - USR_LED_1 */ + AM33XX_IOPAD(0x85c, PIN_OUTPUT | MUX_MODE7) /* (T15) gpmc_a7.gpio1[23] - USR_LED_2 */ + AM33XX_IOPAD(0x860, PIN_OUTPUT | MUX_MODE7) /* (V16) gpmc_a8.gpio1[24] - USR_LED_3 */ + >; + }; + + uart0_pins: pinmux-uart0-pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* (E15) uart0_rxd.uart0_rxd */ + AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* (E16) uart0_txd.uart0_txd */ + >; + }; + + uart4_pins: pinmux-uart4-pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6) /* (T17) gpmc_wait0.uart4_rxd */ + AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* (U17) gpmc_wpn.uart4_txd */ + >; + }; +}; + +&epwmss0 { + status = "okay"; +}; + +&ehrpwm0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&ehrpwm0_pins>; +}; + +&epwmss1 { + status = "okay"; +}; + +&ehrpwm1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&ehrpwm1_pins>; +}; + +&i2c0 { + eeprom: eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + status = "okay"; + clock-frequency = <400000>; +}; + +&mmc1 { + status = "okay"; + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; +}; + +&rtc { + system-power-controller; +}; + +&tscadc { + status = "okay"; + adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; + ti,chan-step-avg = <16 16 16 16 16 16 16 16>; + ti,chan-step-opendelay = <0x98 0x98 0x98 0x98 0x98 0x98 0x98 0x98>; + ti,chan-step-sampledelay = <0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "otg"; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; +}; + +&cppi41dma { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts index 0e4a125f78e3..98aadb0f81c5 100644 --- a/arch/arm/boot/dts/am3517-evm.dts +++ b/arch/arm/boot/dts/am3517-evm.dts @@ -8,11 +8,17 @@ /dts-v1/; #include "am3517.dtsi" +#include "am3517-som.dtsi" +#include <dt-bindings/input/input.h> / { model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)"; compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3"; + aliases { + display0 = &lcd0; + }; + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ @@ -24,6 +30,144 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + gpio-keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + user_pb { + label = "User Push Button"; + linux,code = <BTN_0>; + gpios = <&tca6416 5 GPIO_ACTIVE_LOW>; + }; + + user_sw_1 { + label = "User Switch 1"; + linux,code = <BTN_1>; + gpios = <&tca6416 8 GPIO_ACTIVE_LOW>; + }; + + user_sw_2 { + label = "User Switch 2"; + linux,code = <BTN_2>; + gpios = <&tca6416 9 GPIO_ACTIVE_LOW>; + }; + + user_sw_3 { + label = "User Switch 3"; + linux,code = <BTN_3>; + gpios = <&tca6416 10 GPIO_ACTIVE_LOW>; + }; + + user_sw_4 { + label = "User Switch 4"; + linux,code = <BTN_4>; + gpios = <&tca6416 11 GPIO_ACTIVE_LOW>; + }; + + user_sw_5 { + label = "User Switch 5"; + linux,code = <BTN_5>; + gpios = <&tca6416 12 GPIO_ACTIVE_LOW>; + }; + + user_sw_6 { + label = "User Switch 6"; + linux,code = <BTN_6>; + gpios = <&tca6416 13 GPIO_ACTIVE_LOW>; + }; + + user_sw_7 { + label = "User Switch 7"; + linux,code = <BTN_7>; + gpios = <&tca6416 14 GPIO_ACTIVE_LOW>; + }; + + user_sw_8 { + label = "User Switch 8"; + linux,code = <BTN_8>; + gpios = <&tca6416 15 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins>; + + user_led_1 { + label = "am3517evm:green:user_led_1"; + gpios = <&tca6416 7 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + user_led_2 { + label = "am3517evm:green:user_led_2"; + gpios = <&tca6416 6 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + user_led_3 { + label = "am3517evm:green:user_led_3"; + gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; /* SD/MMC card activity */ + }; + + user_led_4 { + label = "am3517evm:green:user_led_4"; + gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + lcd0: display@0 { + compatible = "panel-dpi"; + label = "15"; + status = "okay"; + pinctrl-names = "default"; + enable-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; /* gpio176, lcd INI */ + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + + panel-timing { + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hfront-porch = <3>; + hback-porch = <2>; + hsync-len = <42>; + vback-porch = <3>; + vfront-porch = <4>; + vsync-len = <11>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + + bl: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&backlight_pins>; + pwms = <&pwm11 0 5000000 0>; + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <7>; + enable-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio_182 */ + }; + + pwm11: dmtimer-pwm@11 { + compatible = "ti,omap-dmtimer-pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pins>; + ti,timers = <&timer11>; + #pwm-cells = <3>; + }; }; &davinci_emac { @@ -34,12 +178,32 @@ status = "okay"; }; -&i2c1 { - clock-frequency = <400000>; +&dss { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_dpi_pins>; + + vdds_dsi-supply = <&vdd_io_reg>; + vdda_video-supply = <&vdd_io_reg>; + + port { + dpi_out: endpoint { + remote-endpoint = <&lcd_in>; + data-lines = <16>; + }; + }; }; &i2c2 { clock-frequency = <400000>; + /* User DIP swithes [1:8] / User LEDS [1:2] */ + tca6416: gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; }; &i2c3 { @@ -47,8 +211,13 @@ }; &mmc1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; vmmc-supply = <&vmmc_fixed>; bus-width = <4>; + wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */ + cd-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio_127 */ }; &mmc2 { @@ -59,3 +228,63 @@ status = "disabled"; }; +&omap3_pmx_core { + + leds_pins: pinmux_leds_pins { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu0.gpio_11 */ + OMAP3_WKUP_IOPAD(0x2a26, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu1.gpio_31 */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ + OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ + OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ + OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ + OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ + OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ + OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE4) /* sdmmc1_dat4.gpio_126 */ + OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE4) /* sdmmc1_dat5.gpio_127 */ + >; + }; + + pwm_pins: pinmux_pwm_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21dc, PIN_OUTPUT | MUX_MODE1) /* mcspi2_cs0.gpt11_pwm */ + >; + }; + + backlight_pins: pinmux_backlight_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21de, PIN_OUTPUT | MUX_MODE4) /* mcspi2_cs1.gpio_182 */ + >; + }; + + dss_dpi_pins: pinmux_dss_dpi_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21d2, PIN_OUTPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */ + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + >; + }; +}; diff --git a/arch/arm/boot/dts/am3517-som.dtsi b/arch/arm/boot/dts/am3517-som.dtsi new file mode 100644 index 000000000000..a6d5ff73c163 --- /dev/null +++ b/arch/arm/boot/dts/am3517-som.dtsi @@ -0,0 +1,142 @@ +/* + * Copyright (C) 2016 Derald D. Woods <woods.technical@gmail.com> + * + * Based on am3517-evm.dts + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/ { + cpus { + cpu@0 { + cpu0-supply = <&vdd_core_reg>; + }; + }; +}; + +&gpmc { + ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ + + nand@0,0 { + compatible = "ti,omap2-nand"; + linux,mtd-name = "micron,mt29f4g16abchch"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + nand-bus-width = <16>; + ti,nand-ecc-opt = "bch8"; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-off-ns = <40>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + gpmc,device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + + s35390a: s35390a@30 { + compatible = "sii,s35390a"; + reg = <0x30>; + + pinctrl-names = "default"; + pinctrl-0 = <&rtc_pins>; + interrupts-extended = <&gpio2 23 IRQ_TYPE_EDGE_FALLING>; /* gpio_55 */ + }; + + tps: tps65023@48 { + compatible = "ti,tps65023"; + reg = <0x48>; + + regulators { + vdd_core_reg: VDCDC1 { + regulator-name = "vdd_core"; + compatible = "regulator-fixed"; + regulator-always-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vdd_io_reg: VDCDC2 { + regulator-name = "vdd_io"; + compatible = "regulator-fixed"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vdd_1v8_reg: VDCDC3 { + regulator-name = "vdd_1v8"; + compatible = "regulator-fixed"; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vdd_usb18_reg: LDO1 { + regulator-name = "vdd_usb18"; + compatible = "regulator-fixed"; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vdd_usb33_reg: LDO2 { + regulator-name = "vdd_usb33"; + compatible = "regulator-fixed"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + + touchscreen: tsc2004@4b { + compatible = "ti,tsc2004"; + reg = <0x4b>; + + vio-supply = <&vdd_io_reg>; + + pinctrl-names = "default"; + pinctrl-0 = <&tsc2004_pins>; + interrupts-extended = <&gpio3 1 IRQ_TYPE_EDGE_RISING>; /* gpio_65 */ + + touchscreen-fuzz-x = <4>; + touchscreen-fuzz-y = <7>; + touchscreen-fuzz-pressure = <2>; + touchscreen-size-x = <480>; + touchscreen-size-y = <272>; + touchscreen-max-pressure = <2048>; + + ti,x-plate-ohms = <280>; + ti,esd-recovery-timeout-ms = <8000>; + }; +}; + +&omap3_pmx_core { + + rtc_pins: pinmux_rtc_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20b6, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_ncs4.gpio_55 */ + >; + }; + + tsc2004_pins: pinmux_tsc2004_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT | MUX_MODE4) /* gpmc_wait3.gpio_65 */ + >; + }; +}; diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/am437x-cm-t43.dts index 3b9a94c274a7..bff5abe69bdb 100644 --- a/arch/arm/boot/dts/am437x-cm-t43.dts +++ b/arch/arm/boot/dts/am437x-cm-t43.dts @@ -203,7 +203,7 @@ tps65218: tps65218@24 { compatible = "ti,tps65218"; reg = <0x24>; - interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */ + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* NMIn */ interrupt-parent = <&gic>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 8fe95cd7232a..60414b1ca404 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -543,7 +543,7 @@ tps65218: tps65218@24 { reg = <0x24>; compatible = "ti,tps65218"; - interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */ + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* NMIn */ interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 4118802b7fea..440351ad0b80 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -15,6 +15,7 @@ #include <dt-bindings/pwm/pwm.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> / { model = "TI AM437x SK EVM"; @@ -158,6 +159,22 @@ }; }; }; + + vmmcwl_fixed: fixedregulator-mmcwl { + /* + * WL_EN is not SDIO standard compliant. It is an out of band + * signal and hard to be dealt with in a standard way by the + * SDIO core driver. + * So modelling the WL_EN line as a regulator was a natural + * choice as the MMC core already deals with MMC supplies. + */ + compatible = "regulator-fixed"; + regulator-name = "vmmcwl_fixed"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; }; &am43xx_pinmux { @@ -418,6 +435,62 @@ AM4372_IOPAD(0xac4, PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */ >; }; + + mmc3_pins_default: pinmux_mmc3_pins_default { + pinctrl-single,pins = < + AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE3) /* (AD21) cam1_data2.mmc2_clk */ + AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE3) /* (AE22) cam1_data3.mmc2_cmd */ + AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE3) /* (AD22) cam1_data4.mmc2_dat0 */ + AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE3) /* (AE23) cam1_data5.mmc2_dat1 */ + AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE3) /* (AD23) cam1_data6.mmc2_dat2 */ + AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE3) /* (AE24) cam1_data7.mmc2_dat3 */ + >; + }; + + mmc3_pins_sleep: pinmux_mmc3_pins_sleep { + pinctrl-single,pins = < + AM4372_IOPAD(0x9f0, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AD21) cam1_data2.mmc2_clk */ + AM4372_IOPAD(0x9f4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AE22) cam1_data3.mmc2_cmd */ + AM4372_IOPAD(0x9f8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AD22) cam1_data4.mmc2_dat0 */ + AM4372_IOPAD(0x9fc, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AE23) cam1_data5.mmc2_dat1 */ + AM4372_IOPAD(0xa00, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AD23) cam1_data6.mmc2_dat2 */ + AM4372_IOPAD(0xa04, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AE24) cam1_data7.mmc2_dat3 */ + >; + }; + + wlan_pins_default: pinmux_wlan_pins_default { + pinctrl-single,pins = < + AM4372_IOPAD(0x9d0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* cam1_data8.gpio4_8 WL_EN */ + AM4372_IOPAD(0x9e4, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* cam1_wen.gpio4_13 WL_IRQ */ + >; + }; + + wlan_pins_sleep: pinmux_wlan_pins_sleep { + pinctrl-single,pins = < + AM4372_IOPAD(0x9d0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* cam1_data8.gpio4_8 WL_EN */ + AM4372_IOPAD(0x9e4, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* cam1_wen.gpio4_13 WL_IRQ */ + >; + }; + + uart1_bt_pins_default: pinmux_uart1_bt_pins_default { + pinctrl-single,pins = < + AM4372_IOPAD(0x980, PIN_INPUT | MUX_MODE0) /* uart1_rxd.uart1_rxd */ + AM4372_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ + AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */ + AM4372_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */ + AM4372_IOPAD(0x9cc, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* cam1_data9.gpio4_7 BT_EN */ + >; + }; + + uart1_bt_pins_sleep: pinmux_uart1_bt_pins_sleep { + pinctrl-single,pins = < + AM4372_IOPAD(0x980, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_rxd.uart1_rxd */ + AM4372_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_txd.uart1_txd */ + AM4372_IOPAD(0x978, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_ctsn.uart1_ctsn */ + AM4372_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_rtsn.uart1_rtsn */ + AM4372_IOPAD(0x9cc, PIN_OUTPUT_PULLUP | MUX_MODE7) /* cam1_data9.gpio4_7 BT_EN */ + >; + }; }; &i2c0 { @@ -581,6 +654,10 @@ status = "okay"; }; +&gpio4 { + status = "okay"; +}; + &gpio5 { status = "okay"; }; @@ -595,6 +672,44 @@ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; }; +&uart1 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart1_bt_pins_default>; + pinctrl-1 = <&uart1_bt_pins_sleep>; +}; + +&mmc3 { + status = "okay"; + /* + * these are on the crossbar and are outlined in the + * xbar-event-map element + */ + dmas = <&edma_xbar 30 0 1>, + <&edma_xbar 31 0 2>; + dma-names = "tx", "rx"; + vmmc-supply = <&vmmcwl_fixed>; + bus-width = <4>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mmc3_pins_default>; + pinctrl-1 = <&mmc3_pins_sleep>; + cap-power-off-card; + keep-power-in-suspend; + ti,non-removable; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1835"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&wlan_pins_default>; + pinctrl-1 = <&wlan_pins_sleep>; + reg = <2>; + interrupt-parent = <&gpio4>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + &usb2_phy1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index a66941885c11..6502d3397653 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -595,7 +595,7 @@ tps65218: tps65218@24 { reg = <0x24>; compatible = "ti,tps65218"; - interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */ + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* NMIn */ interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts index a2555140babc..5bb9d68d6e90 100644 --- a/arch/arm/boot/dts/am571x-idk.dts +++ b/arch/arm/boot/dts/am571x-idk.dts @@ -10,6 +10,7 @@ #include "dra72x.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> +#include "dra7-mmc-iodelay.dtsi" #include "dra72x-mmc-iodelay.dtsi" #include "am57xx-idk-common.dtsi" @@ -102,7 +103,7 @@ &mmc1 { pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104"; - pinctrl-0 = <&mmc1_pins_default>; + pinctrl-0 = <&mmc1_pins_default_no_clk_pu>; pinctrl-1 = <&mmc1_pins_hs>; pinctrl-2 = <&mmc1_pins_sdr12>; pinctrl-3 = <&mmc1_pins_sdr25>; @@ -112,7 +113,7 @@ }; &mmc2 { - pinctrl-names = "default", "hs", "ddr_1_8v"; + pinctrl-names = "default", "hs", "ddr_3_3v"; pinctrl-0 = <&mmc2_pins_default>; pinctrl-1 = <&mmc2_pins_hs>; pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>; diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts index 3a02ed720957..3ef9111d0e8b 100644 --- a/arch/arm/boot/dts/am572x-idk.dts +++ b/arch/arm/boot/dts/am572x-idk.dts @@ -9,6 +9,7 @@ /dts-v1/; #include "dra74x.dtsi" +#include "dra7-mmc-iodelay.dtsi" #include "dra74x-mmc-iodelay.dtsi" #include "am572x-idk-common.dtsi" @@ -20,7 +21,7 @@ &mmc1 { pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104"; - pinctrl-0 = <&mmc1_pins_default>; + pinctrl-0 = <&mmc1_pins_default_no_clk_pu>; pinctrl-1 = <&mmc1_pins_hs>; pinctrl-2 = <&mmc1_pins_sdr12>; pinctrl-3 = <&mmc1_pins_sdr25>; @@ -30,7 +31,7 @@ }; &mmc2 { - pinctrl-names = "default", "hs", "ddr_1_8v"; + pinctrl-names = "default", "hs", "ddr_3_3v"; pinctrl-0 = <&mmc2_pins_default>; pinctrl-1 = <&mmc2_pins_hs>; pinctrl-2 = <&mmc2_pins_ddr_rev20>; diff --git a/arch/arm/boot/dts/am574x-idk.dts b/arch/arm/boot/dts/am574x-idk.dts index 41e12a382d2f..378dfa780ac1 100644 --- a/arch/arm/boot/dts/am574x-idk.dts +++ b/arch/arm/boot/dts/am574x-idk.dts @@ -7,6 +7,8 @@ /dts-v1/; #include "dra76x.dtsi" +#include "dra7-mmc-iodelay.dtsi" +#include "dra76x-mmc-iodelay.dtsi" #include "am572x-idk-common.dtsi" / { @@ -20,3 +22,21 @@ spi-max-frequency = <96000000>; }; }; + +&mmc1 { + pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104"; + pinctrl-0 = <&mmc1_pins_default_no_clk_pu>; + pinctrl-1 = <&mmc1_pins_hs>; + pinctrl-2 = <&mmc1_pins_default>; + pinctrl-3 = <&mmc1_pins_hs>; + pinctrl-4 = <&mmc1_pins_sdr50>; + pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_conf>; + pinctrl-6 = <&mmc1_pins_ddr50 &mmc1_iodelay_sdr104_conf>; +}; + +&mmc2 { + pinctrl-names = "default", "hs", "ddr_3_3v"; + pinctrl-0 = <&mmc2_pins_default>; + pinctrl-1 = <&mmc2_pins_default>; + pinctrl-2 = <&mmc2_pins_default>; +}; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi index 6204a266212a..ad953113cefb 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi +++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi @@ -444,8 +444,8 @@ vmmc-supply = <&vdd_3v3>; vqmmc-supply = <&vdd_3v3>; bus-width = <8>; - ti,non-removable; - cap-mmc-dual-data-rate; + non-removable; + no-1-8-v; }; &sata { diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index d6689106d2a8..70a71c641066 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -25,10 +25,11 @@ pinctrl-1 = <&mmc1_pins_hs>; vmmc-supply = <&ldo1_reg>; + no-1-8-v; }; &mmc2 { - pinctrl-names = "default", "hs", "ddr_1_8v"; + pinctrl-names = "default", "hs", "ddr_3_3v"; pinctrl-0 = <&mmc2_pins_default>; pinctrl-1 = <&mmc2_pins_hs>; pinctrl-2 = <&mmc2_pins_ddr_3_3v_rev11 &mmc2_iodelay_ddr_3_3v_rev11_conf>; diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index 43cdf523a8a0..ad87f1ae904d 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -115,17 +115,6 @@ DRA7XX_CORE_IOPAD(0x37d4, MUX_MODE15 | PULL_UP) /* dcan1_rx.off */ >; }; - - mmc1_pins_default: mmc1_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mmc1_clk.clk */ - DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ - DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ - DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ - DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ - DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ - >; - }; }; &i2c1 { @@ -423,8 +412,9 @@ vmmc-supply = <&v3_3d>; vqmmc-supply = <&v3_3d>; bus-width = <8>; - ti,non-removable; + non-removable; max-frequency = <96000000>; + no-1-8-v; }; &dcan1 { diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index afe46097a403..77261a2fb949 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -105,33 +105,6 @@ usb@51000 { status = "okay"; }; - - nand@d0000 { - status = "okay"; - num-cs = <1>; - marvell,nand-keep-config; - marvell,nand-enable-arbiter; - nand-on-flash-bbt; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "U-Boot"; - reg = <0 0x800000>; - }; - partition@800000 { - label = "Linux"; - reg = <0x800000 0x800000>; - }; - partition@1000000 { - label = "Filesystem"; - reg = <0x1000000 0x3f000000>; - }; - }; - }; }; }; @@ -239,3 +212,33 @@ }; }; +&nand_controller { + status = "okay"; + + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + marvell,nand-keep-config; + nand-on-flash-bbt; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x800000>; + }; + partition@800000 { + label = "Linux"; + reg = <0x800000 0x800000>; + }; + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts index 8e46f63cbaa1..baa459dd51e4 100644 --- a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts +++ b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts @@ -44,61 +44,6 @@ usb@50000 { status = "okay"; }; - - nand@d0000 { - status = "okay"; - num-cs = <1>; - marvell,nand-keep-config; - marvell,nand-enable-arbiter; - nand-on-flash-bbt; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - - partition@0 { - label = "u-boot"; - /* 1.0 MiB */ - reg = <0x0000000 0x100000>; - read-only; - }; - - partition@100000 { - label = "u-boot-env"; - /* 128 KiB */ - reg = <0x100000 0x20000>; - read-only; - }; - - partition@120000 { - label = "uImage"; - /* 7 MiB */ - reg = <0x120000 0x700000>; - }; - - partition@820000 { - label = "ubifs"; - /* ~ 84 MiB */ - reg = <0x820000 0x54e0000>; - }; - - /* Hardcoded into stock bootloader */ - partition@5d00000 { - label = "failsafe-uImage"; - /* 5 MiB */ - reg = <0x5d00000 0x500000>; - }; - - partition@6200000 { - label = "failsafe-fs"; - /* 29 MiB */ - reg = <0x6200000 0x1d00000>; - }; - - partition@7f00000 { - label = "bbt"; - /* 1 MiB for BBT */ - reg = <0x7f00000 0x100000>; - }; - }; }; }; @@ -319,3 +264,68 @@ clock-frequency = <100000>; status = "okay"; }; + +&nand_controller { + status = "okay"; + + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + marvell,nand-keep-config; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + /* 1.0 MiB */ + reg = <0x0000000 0x100000>; + read-only; + }; + + partition@100000 { + label = "u-boot-env"; + /* 128 KiB */ + reg = <0x100000 0x20000>; + read-only; + }; + + partition@120000 { + label = "uImage"; + /* 7 MiB */ + reg = <0x120000 0x700000>; + }; + + partition@820000 { + label = "ubifs"; + /* ~ 84 MiB */ + reg = <0x820000 0x54e0000>; + }; + + /* Hardcoded into stock bootloader */ + partition@5d00000 { + label = "failsafe-uImage"; + /* 5 MiB */ + reg = <0x5d00000 0x500000>; + }; + + partition@6200000 { + label = "failsafe-fs"; + /* 29 MiB */ + reg = <0x6200000 0x1d00000>; + }; + + partition@7f00000 { + label = "bbt"; + /* 1 MiB for BBT */ + reg = <0x7f00000 0x100000>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index 996f31b00729..7c2f5a79b50d 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -108,27 +108,6 @@ reg = <0x25>; }; }; - - nand@d0000 { - status = "okay"; - num-cs = <1>; - marvell,nand-keep-config; - marvell,nand-enable-arbiter; - nand-on-flash-bbt; - - partition@0 { - label = "U-Boot"; - reg = <0 0x400000>; - }; - partition@400000 { - label = "Linux"; - reg = <0x400000 0x400000>; - }; - partition@800000 { - label = "Filesystem"; - reg = <0x800000 0x3f800000>; - }; - }; }; }; }; @@ -173,3 +152,33 @@ }; }; +&nand_controller { + status = "okay"; + + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + marvell,nand-keep-config; + nand-on-flash-bbt; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x400000>; + }; + partition@400000 { + label = "Linux"; + reg = <0x400000 0x400000>; + }; + partition@800000 { + label = "Filesystem"; + reg = <0x800000 0x3f800000>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts index 56634803e16b..b0b640b7de40 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts @@ -81,46 +81,6 @@ pwm_polarity = <0>; }; }; - - nand@d0000 { - status = "okay"; - num-cs = <1>; - marvell,nand-keep-config; - marvell,nand-enable-arbiter; - nand-on-flash-bbt; - - /* Use Hardware BCH ECC */ - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x180000>; /* 1.5MB */ - read-only; - }; - - partition@180000 { - label = "u-boot-env"; - reg = <0x180000 0x20000>; /* 128KB */ - read-only; - }; - - partition@200000 { - label = "uImage"; - reg = <0x0200000 0x600000>; /* 6MB */ - }; - - partition@800000 { - label = "minirootfs"; - reg = <0x0800000 0x400000>; /* 4MB */ - }; - - /* Last MB is for the BBT, i.e. not writable */ - partition@c00000 { - label = "ubifs"; - reg = <0x0c00000 0x7400000>; /* 116MB */ - }; - }; }; }; @@ -264,3 +224,53 @@ marvell,function = "gpio"; }; }; + +&nand_controller { + status = "okay"; + + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + marvell,nand-keep-config; + nand-on-flash-bbt; + + /* Use Hardware BCH ECC */ + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x180000>; /* 1.5MB */ + read-only; + }; + + partition@180000 { + label = "u-boot-env"; + reg = <0x180000 0x20000>; /* 128KB */ + read-only; + }; + + partition@200000 { + label = "uImage"; + reg = <0x0200000 0x600000>; /* 6MB */ + }; + + partition@800000 { + label = "minirootfs"; + reg = <0x0800000 0x400000>; /* 4MB */ + }; + + /* Last MB is for the BBT, i.e. not writable */ + partition@c00000 { + label = "ubifs"; + reg = <0x0c00000 0x7400000>; /* 116MB */ + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts index 16d0307f786a..9fd1cb9f4992 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts @@ -90,46 +90,6 @@ reg = <0x23>; }; }; - - nand@d0000 { - status = "okay"; - num-cs = <1>; - marvell,nand-keep-config; - marvell,nand-enable-arbiter; - nand-on-flash-bbt; - - /* Use Hardware BCH ECC */ - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x180000>; /* 1.5MB */ - read-only; - }; - - partition@180000 { - label = "u-boot-env"; - reg = <0x180000 0x20000>; /* 128KB */ - read-only; - }; - - partition@200000 { - label = "uImage"; - reg = <0x0200000 0x600000>; /* 6MB */ - }; - - partition@800000 { - label = "minirootfs"; - reg = <0x0800000 0x400000>; /* 4MB */ - }; - - /* Last MB is for the BBT, i.e. not writable */ - partition@c00000 { - label = "ubifs"; - reg = <0x0c00000 0x7400000>; /* 116MB */ - }; - }; }; }; @@ -276,3 +236,53 @@ marvell,function = "gpio"; }; }; + +&nand_controller { + status = "okay"; + + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + marvell,nand-keep-config; + nand-on-flash-bbt; + + /* Use Hardware BCH ECC */ + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x180000>; /* 1.5MB */ + read-only; + }; + + partition@180000 { + label = "u-boot-env"; + reg = <0x180000 0x20000>; /* 128KB */ + read-only; + }; + + partition@200000 { + label = "uImage"; + reg = <0x0200000 0x600000>; /* 6MB */ + }; + + partition@800000 { + label = "minirootfs"; + reg = <0x0800000 0x400000>; /* 4MB */ + }; + + /* Last MB is for the BBT, i.e. not writable */ + partition@c00000 { + label = "ubifs"; + reg = <0x0c00000 0x7400000>; /* 116MB */ + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index cc2f774eb267..2bfb3108b5b2 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -112,27 +112,6 @@ default-state = "keep"; }; }; - - nand@d0000 { - status = "okay"; - num-cs = <1>; - marvell,nand-keep-config; - marvell,nand-enable-arbiter; - nand-on-flash-bbt; - - partition@0 { - label = "U-Boot"; - reg = <0 0x800000>; - }; - partition@800000 { - label = "Linux"; - reg = <0x800000 0x800000>; - }; - partition@1000000 { - label = "Filesystem"; - reg = <0x1000000 0x3f000000>; - }; - }; }; }; @@ -288,3 +267,34 @@ marvell,function = "gpio"; }; }; + +&nand_controller { + status = "okay"; + + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + marvell,nand-keep-config; + nand-on-flash-bbt; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x800000>; + }; + partition@800000 { + label = "Linux"; + reg = <0x800000 0x800000>; + }; + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi index a5206db0ebbd..b52634ecf1d9 100644 --- a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi +++ b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi @@ -66,33 +66,6 @@ interrupts = <110>; }; }; - - nand@d0000 { - status = "okay"; - num-cs = <1>; - marvell,nand-keep-config; - marvell,nand-enable-arbiter; - nand-on-flash-bbt; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x300000>; - }; - partition@300000 { - label = "device-tree"; - reg = <0x300000 0x20000>; - }; - partition@320000 { - label = "linux"; - reg = <0x320000 0x2000000>; - }; - partition@2320000 { - label = "rootfs"; - reg = <0x2320000 0xdce0000>; - }; - }; }; }; @@ -227,3 +200,40 @@ marvell,function = "gpio"; }; }; + +&nand_controller { + status = "okay"; + + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + marvell,nand-keep-config; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x300000>; + }; + partition@300000 { + label = "device-tree"; + reg = <0x300000 0x20000>; + }; + partition@320000 { + label = "linux"; + reg = <0x320000 0x2000000>; + }; + partition@2320000 { + label = "rootfs"; + reg = <0x2320000 0xdce0000>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 11fc3271dad4..c15f5e92f97f 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -244,11 +244,11 @@ status = "disabled"; }; - nand: nand@d0000 { - compatible = "marvell,armada370-nand"; + nand_controller: nand-controller@d0000 { + compatible = "marvell,armada370-nand-controller"; reg = <0xd0000 0x54>; #address-cells = <1>; - #size-cells = <1>; + #size-cells = <0>; interrupts = <113>; clocks = <&coredivclk 0>; status = "disabled"; diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts index e4ecd7e75644..0e679465cbb5 100644 --- a/arch/arm/boot/dts/armada-375-db.dts +++ b/arch/arm/boot/dts/armada-375-db.dts @@ -103,28 +103,38 @@ nr-ports = <2>; }; -&nand { +&nand_controller { + status = "okay"; pinctrl-0 = <&nand_pins>; pinctrl-names = "default"; - status = "okay"; - num-cs = <1>; - marvell,nand-keep-config; - marvell,nand-enable-arbiter; - nand-on-flash-bbt; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - - partition@0 { - label = "U-Boot"; - reg = <0 0x800000>; - }; - partition@800000 { - label = "Linux"; - reg = <0x800000 0x800000>; - }; - partition@1000000 { - label = "Filesystem"; - reg = <0x1000000 0x3f000000>; + + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + marvell,nand-keep-config; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x800000>; + }; + partition@800000 { + label = "Linux"; + reg = <0x800000 0x800000>; + }; + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index 53ead6f26a0e..2932a29ae272 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi @@ -502,11 +502,11 @@ status = "disabled"; }; - nand: nand@d0000 { - compatible = "marvell,armada370-nand"; + nand_controller: nand-controller@d0000 { + compatible = "marvell,armada370-nand-controller"; reg = <0xd0000 0x54>; #address-cells = <1>; - #size-cells = <1>; + #size-cells = <0>; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gateclk 11>; status = "disabled"; diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts index d294f24281a5..0e4613bb56ee 100644 --- a/arch/arm/boot/dts/armada-385-db-ap.dts +++ b/arch/arm/boot/dts/armada-385-db-ap.dts @@ -135,39 +135,6 @@ status = "okay"; }; - nfc: flash@d0000 { - status = "okay"; - num-cs = <1>; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - marvell,nand-keep-config; - marvell,nand-enable-arbiter; - nand-on-flash-bbt; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "U-Boot"; - reg = <0x00000000 0x00800000>; - read-only; - }; - - partition@800000 { - label = "uImage"; - reg = <0x00800000 0x00400000>; - read-only; - }; - - partition@c00000 { - label = "Root"; - reg = <0x00c00000 0x3f400000>; - }; - }; - }; - usb3@f0000 { status = "okay"; usb-phy = <&usb3_phy>; @@ -233,3 +200,39 @@ spi-max-frequency = <54000000>; }; }; + +&nand_controller { + status = "okay"; + + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0x00000000 0x00800000>; + read-only; + }; + + partition@800000 { + label = "uImage"; + reg = <0x00800000 0x00400000>; + read-only; + }; + + partition@c00000 { + label = "Root"; + reg = <0x00c00000 0x3f400000>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-385-linksys-caiman.dts b/arch/arm/boot/dts/armada-385-linksys-caiman.dts index 1f30993af405..a03050c97084 100644 --- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts +++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts @@ -73,67 +73,72 @@ &nand { /* 128MiB */ - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x200000>; /* 2MiB */ - read-only; - }; - - partition@100000 { - label = "u_env"; - reg = <0x200000 0x40000>; /* 256KiB */ - }; - - partition@140000 { - label = "s_env"; - reg = <0x240000 0x40000>; /* 256KiB */ - }; - - partition@900000 { - label = "devinfo"; - reg = <0x900000 0x100000>; /* 1MiB */ - read-only; - }; - - /* kernel1 overlaps with rootfs1 by design */ - partition@a00000 { - label = "kernel1"; - reg = <0xa00000 0x2800000>; /* 40MiB */ - }; - - partition@1000000 { - label = "rootfs1"; - reg = <0x1000000 0x2200000>; /* 34MiB */ - }; - - /* kernel2 overlaps with rootfs2 by design */ - partition@3200000 { - label = "kernel2"; - reg = <0x3200000 0x2800000>; /* 40MiB */ - }; - - partition@3800000 { - label = "rootfs2"; - reg = <0x3800000 0x2200000>; /* 34MiB */ - }; - - /* - * 38MiB, last MiB is for the BBT, not writable - */ - partition@5a00000 { - label = "syscfg"; - reg = <0x5a00000 0x2600000>; - }; - - /* - * Unused area between "s_env" and "devinfo". - * Moved here because otherwise the renumbered - * partitions would break the bootloader - * supplied bootargs - */ - partition@180000 { - label = "unused_area"; - reg = <0x280000 0x680000>; /* 6.5MiB */ + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x200000>; /* 2MiB */ + read-only; + }; + + partition@100000 { + label = "u_env"; + reg = <0x200000 0x40000>; /* 256KiB */ + }; + + partition@140000 { + label = "s_env"; + reg = <0x240000 0x40000>; /* 256KiB */ + }; + + partition@900000 { + label = "devinfo"; + reg = <0x900000 0x100000>; /* 1MiB */ + read-only; + }; + + /* kernel1 overlaps with rootfs1 by design */ + partition@a00000 { + label = "kernel1"; + reg = <0xa00000 0x2800000>; /* 40MiB */ + }; + + partition@1000000 { + label = "rootfs1"; + reg = <0x1000000 0x2200000>; /* 34MiB */ + }; + + /* kernel2 overlaps with rootfs2 by design */ + partition@3200000 { + label = "kernel2"; + reg = <0x3200000 0x2800000>; /* 40MiB */ + }; + + partition@3800000 { + label = "rootfs2"; + reg = <0x3800000 0x2200000>; /* 34MiB */ + }; + + /* + * 38MiB, last MiB is for the BBT, not writable + */ + partition@5a00000 { + label = "syscfg"; + reg = <0x5a00000 0x2600000>; + }; + + /* + * Unused area between "s_env" and "devinfo". + * Moved here because otherwise the renumbered + * partitions would break the bootloader + * supplied bootargs + */ + partition@180000 { + label = "unused_area"; + reg = <0x280000 0x680000>; /* 6.5MiB */ + }; }; }; diff --git a/arch/arm/boot/dts/armada-385-linksys-cobra.dts b/arch/arm/boot/dts/armada-385-linksys-cobra.dts index bc34802ce6bc..e3e4877a6f49 100644 --- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts +++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts @@ -73,67 +73,72 @@ &nand { /* 128MiB */ - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x200000>; /* 2MiB */ - read-only; - }; - - partition@100000 { - label = "u_env"; - reg = <0x200000 0x40000>; /* 256KiB */ - }; - - partition@140000 { - label = "s_env"; - reg = <0x240000 0x40000>; /* 256KiB */ - }; - - partition@900000 { - label = "devinfo"; - reg = <0x900000 0x100000>; /* 1MiB */ - read-only; - }; - - /* kernel1 overlaps with rootfs1 by design */ - partition@a00000 { - label = "kernel1"; - reg = <0xa00000 0x2800000>; /* 40MiB */ - }; - - partition@1000000 { - label = "rootfs1"; - reg = <0x1000000 0x2200000>; /* 34MiB */ - }; - - /* kernel2 overlaps with rootfs2 by design */ - partition@3200000 { - label = "kernel2"; - reg = <0x3200000 0x2800000>; /* 40MiB */ - }; - - partition@3800000 { - label = "rootfs2"; - reg = <0x3800000 0x2200000>; /* 34MiB */ - }; - - /* - * 38MiB, last MiB is for the BBT, not writable - */ - partition@5a00000 { - label = "syscfg"; - reg = <0x5a00000 0x2600000>; - }; - - /* - * Unused area between "s_env" and "devinfo". - * Moved here because otherwise the renumbered - * partitions would break the bootloader - * supplied bootargs - */ - partition@180000 { - label = "unused_area"; - reg = <0x280000 0x680000>; /* 6.5MiB */ + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x200000>; /* 2MiB */ + read-only; + }; + + partition@100000 { + label = "u_env"; + reg = <0x200000 0x40000>; /* 256KiB */ + }; + + partition@140000 { + label = "s_env"; + reg = <0x240000 0x40000>; /* 256KiB */ + }; + + partition@900000 { + label = "devinfo"; + reg = <0x900000 0x100000>; /* 1MiB */ + read-only; + }; + + /* kernel1 overlaps with rootfs1 by design */ + partition@a00000 { + label = "kernel1"; + reg = <0xa00000 0x2800000>; /* 40MiB */ + }; + + partition@1000000 { + label = "rootfs1"; + reg = <0x1000000 0x2200000>; /* 34MiB */ + }; + + /* kernel2 overlaps with rootfs2 by design */ + partition@3200000 { + label = "kernel2"; + reg = <0x3200000 0x2800000>; /* 40MiB */ + }; + + partition@3800000 { + label = "rootfs2"; + reg = <0x3800000 0x2200000>; /* 34MiB */ + }; + + /* + * 38MiB, last MiB is for the BBT, not writable + */ + partition@5a00000 { + label = "syscfg"; + reg = <0x5a00000 0x2600000>; + }; + + /* + * Unused area between "s_env" and "devinfo". + * Moved here because otherwise the renumbered + * partitions would break the bootloader + * supplied bootargs + */ + partition@180000 { + label = "unused_area"; + reg = <0x280000 0x680000>; /* 6.5MiB */ + }; }; }; diff --git a/arch/arm/boot/dts/armada-385-linksys-rango.dts b/arch/arm/boot/dts/armada-385-linksys-rango.dts index 5b745a0ccce5..3c4af57ec2b9 100644 --- a/arch/arm/boot/dts/armada-385-linksys-rango.dts +++ b/arch/arm/boot/dts/armada-385-linksys-rango.dts @@ -81,74 +81,79 @@ &nand { /* AMD/Spansion S34ML02G2 256MiB, OEM Layout */ - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x200000>; /* 2MiB */ - read-only; - }; - - partition@200000 { - label = "u_env"; - reg = <0x200000 0x20000>; /* 128KiB */ - }; - - partition@220000 { - label = "s_env"; - reg = <0x220000 0x40000>; /* 256KiB */ - }; - - partition@7e0000 { - label = "devinfo"; - reg = <0x7e0000 0x40000>; /* 256KiB */ - read-only; - }; - - partition@820000 { - label = "sysdiag"; - reg = <0x820000 0x1e0000>; /* 1920KiB */ - read-only; - }; - - /* kernel1 overlaps with rootfs1 by design */ - partition@a00000 { - label = "kernel1"; - reg = <0xa00000 0x5000000>; /* 80MiB */ - }; - - partition@1000000 { - label = "rootfs1"; - reg = <0x1000000 0x4a00000>; /* 74MiB */ - }; - - /* kernel2 overlaps with rootfs2 by design */ - partition@5a00000 { - label = "kernel2"; - reg = <0x5a00000 0x5000000>; /* 80MiB */ - }; - - partition@6000000 { - label = "rootfs2"; - reg = <0x6000000 0x4a00000>; /* 74MiB */ - }; - - /* - * 86MiB, last MiB is for the BBT, not writable - */ - partition@aa00000 { - label = "syscfg"; - reg = <0xaa00000 0x5600000>; - }; - - /* - * Unused area between "s_env" and "devinfo". - * Moved here because otherwise the renumbered - * partitions would break the bootloader - * supplied bootargs - */ - partition@180000 { - label = "unused_area"; - reg = <0x260000 0x5c0000>; /* 5.75MiB */ + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x200000>; /* 2MiB */ + read-only; + }; + + partition@200000 { + label = "u_env"; + reg = <0x200000 0x20000>; /* 128KiB */ + }; + + partition@220000 { + label = "s_env"; + reg = <0x220000 0x40000>; /* 256KiB */ + }; + + partition@7e0000 { + label = "devinfo"; + reg = <0x7e0000 0x40000>; /* 256KiB */ + read-only; + }; + + partition@820000 { + label = "sysdiag"; + reg = <0x820000 0x1e0000>; /* 1920KiB */ + read-only; + }; + + /* kernel1 overlaps with rootfs1 by design */ + partition@a00000 { + label = "kernel1"; + reg = <0xa00000 0x5000000>; /* 80MiB */ + }; + + partition@1000000 { + label = "rootfs1"; + reg = <0x1000000 0x4a00000>; /* 74MiB */ + }; + + /* kernel2 overlaps with rootfs2 by design */ + partition@5a00000 { + label = "kernel2"; + reg = <0x5a00000 0x5000000>; /* 80MiB */ + }; + + partition@6000000 { + label = "rootfs2"; + reg = <0x6000000 0x4a00000>; /* 74MiB */ + }; + + /* + * 86MiB, last MiB is for the BBT, not writable + */ + partition@aa00000 { + label = "syscfg"; + reg = <0xaa00000 0x5600000>; + }; + + /* + * Unused area between "s_env" and "devinfo". + * Moved here because otherwise the renumbered + * partitions would break the bootloader + * supplied bootargs + */ + partition@180000 { + label = "unused_area"; + reg = <0x260000 0x5c0000>; /* 5.75MiB */ + }; }; }; diff --git a/arch/arm/boot/dts/armada-385-linksys-shelby.dts b/arch/arm/boot/dts/armada-385-linksys-shelby.dts index 44f5aeb5fc33..3451cd3e5dff 100644 --- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts +++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts @@ -73,67 +73,72 @@ &nand { /* 128MiB */ - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x200000>; /* 2MiB */ - read-only; - }; - - partition@100000 { - label = "u_env"; - reg = <0x200000 0x40000>; /* 256KiB */ - }; - - partition@140000 { - label = "s_env"; - reg = <0x240000 0x40000>; /* 256KiB */ - }; - - partition@900000 { - label = "devinfo"; - reg = <0x900000 0x100000>; /* 1MiB */ - read-only; - }; - - /* kernel1 overlaps with rootfs1 by design */ - partition@a00000 { - label = "kernel1"; - reg = <0xa00000 0x2800000>; /* 40MiB */ - }; - - partition@1000000 { - label = "rootfs1"; - reg = <0x1000000 0x2200000>; /* 34MiB */ - }; - - /* kernel2 overlaps with rootfs2 by design */ - partition@3200000 { - label = "kernel2"; - reg = <0x3200000 0x2800000>; /* 40MiB */ - }; - - partition@3800000 { - label = "rootfs2"; - reg = <0x3800000 0x2200000>; /* 34MiB */ - }; - - /* - * 38MiB, last MiB is for the BBT, not writable - */ - partition@5a00000 { - label = "syscfg"; - reg = <0x5a00000 0x2600000>; - }; - - /* - * Unused area between "s_env" and "devinfo". - * Moved here because otherwise the renumbered - * partitions would break the bootloader - * supplied bootargs - */ - partition@180000 { - label = "unused_area"; - reg = <0x280000 0x680000>; /* 6.5MiB */ + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x200000>; /* 2MiB */ + read-only; + }; + + partition@100000 { + label = "u_env"; + reg = <0x200000 0x40000>; /* 256KiB */ + }; + + partition@140000 { + label = "s_env"; + reg = <0x240000 0x40000>; /* 256KiB */ + }; + + partition@900000 { + label = "devinfo"; + reg = <0x900000 0x100000>; /* 1MiB */ + read-only; + }; + + /* kernel1 overlaps with rootfs1 by design */ + partition@a00000 { + label = "kernel1"; + reg = <0xa00000 0x2800000>; /* 40MiB */ + }; + + partition@1000000 { + label = "rootfs1"; + reg = <0x1000000 0x2200000>; /* 34MiB */ + }; + + /* kernel2 overlaps with rootfs2 by design */ + partition@3200000 { + label = "kernel2"; + reg = <0x3200000 0x2800000>; /* 40MiB */ + }; + + partition@3800000 { + label = "rootfs2"; + reg = <0x3800000 0x2200000>; /* 34MiB */ + }; + + /* + * 38MiB, last MiB is for the BBT, not writable + */ + partition@5a00000 { + label = "syscfg"; + reg = <0x5a00000 0x2600000>; + }; + + /* + * Unused area between "s_env" and "devinfo". + * Moved here because otherwise the renumbered + * partitions would break the bootloader + * supplied bootargs + */ + partition@180000 { + label = "unused_area"; + reg = <0x280000 0x680000>; /* 6.5MiB */ + }; }; }; diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi index 4a0d7360110b..827e82be2201 100644 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -138,13 +138,19 @@ }; }; -&nand { +&nand_controller { /* 128MiB or 256MiB */ status = "okay"; - num-cs = <1>; - marvell,nand-keep-config; - marvell,nand-enable-arbiter; - nand-on-flash-bbt; + #address-cells = <1>; + #size-cells = <0>; + + nand: nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + marvell,nand-keep-config; + nand-on-flash-bbt; + }; }; &mdio { diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts index 05250d426dc4..a2bec07bf4c5 100644 --- a/arch/arm/boot/dts/armada-388-db.dts +++ b/arch/arm/boot/dts/armada-388-db.dts @@ -91,29 +91,6 @@ status = "okay"; }; - flash@d0000 { - status = "okay"; - num-cs = <1>; - marvell,nand-keep-config; - marvell,nand-enable-arbiter; - nand-on-flash-bbt; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - - partition@0 { - label = "U-Boot"; - reg = <0 0x800000>; - }; - partition@800000 { - label = "Linux"; - reg = <0x800000 0x800000>; - }; - partition@1000000 { - label = "Filesystem"; - reg = <0x1000000 0x3f000000>; - }; - }; - sdhci@d8000 { broken-cd; wp-inverted; @@ -165,3 +142,35 @@ }; }; +&nand_controller { + status = "okay"; + + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + marvell,nand-keep-config; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x800000>; + }; + partition@800000 { + label = "Linux"; + reg = <0x800000 0x800000>; + }; + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 6916d7532ad2..18edc9bc7927 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -551,11 +551,11 @@ status = "okay"; }; - nand: flash@d0000 { - compatible = "marvell,armada370-nand"; + nand_controller: nand-controller@d0000 { + compatible = "marvell,armada370-nand-controller"; reg = <0xd0000 0x54>; #address-cells = <1>; - #size-cells = <1>; + #size-cells = <0>; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; clocks = <&coredivclk 0>; status = "disabled"; diff --git a/arch/arm/boot/dts/armada-390-db.dts b/arch/arm/boot/dts/armada-390-db.dts index 1b2362e4c831..0e29474ae9a2 100644 --- a/arch/arm/boot/dts/armada-390-db.dts +++ b/arch/arm/boot/dts/armada-390-db.dts @@ -49,37 +49,6 @@ status = "okay"; }; - flash@d0000 { - status = "okay"; - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - num-cs = <1>; - marvell,nand-keep-config; - marvell,nand-enable-arbiter; - nand-on-flash-bbt; - nand-ecc-strength = <8>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "U-Boot"; - reg = <0 0x800000>; - }; - partition@800000 { - label = "Linux"; - reg = <0x800000 0x800000>; - }; - partition@1000000 { - label = "Filesystem"; - reg = <0x1000000 0x3f000000>; - }; - }; - }; - /* CON98 */ usb3@f8000 { status = "okay"; @@ -136,3 +105,38 @@ }; }; }; + +&nand_controller { + status = "okay"; + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + marvell,nand-keep-config; + nand-on-flash-bbt; + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x800000>; + }; + partition@800000 { + label = "Linux"; + reg = <0x800000 0x800000>; + }; + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-395-gp.dts b/arch/arm/boot/dts/armada-395-gp.dts index 2a9de192b423..6dd9e9077f84 100644 --- a/arch/arm/boot/dts/armada-395-gp.dts +++ b/arch/arm/boot/dts/armada-395-gp.dts @@ -57,41 +57,6 @@ status = "okay"; }; - flash@d0000 { - status = "okay"; - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - num-cs = <1>; - marvell,nand-keep-config; - marvell,nand-enable-arbiter; - nand-on-flash-bbt; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "U-Boot"; - reg = <0x00000000 0x00600000>; - read-only; - }; - - partition@800000 { - label = "uImage"; - reg = <0x00600000 0x00400000>; - read-only; - }; - - partition@1000000 { - label = "Root"; - reg = <0x00a00000 0x3f600000>; - }; - }; - }; - /* CON18 */ sdhci@d8000 { clock-frequency = <200000000>; @@ -130,3 +95,42 @@ }; }; }; + +&nand_controller { + status = "okay"; + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + marvell,nand-keep-config; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0x00000000 0x00600000>; + read-only; + }; + + partition@800000 { + label = "uImage"; + reg = <0x00600000 0x00400000>; + read-only; + }; + + partition@1000000 { + label = "Root"; + reg = <0x00a00000 0x3f600000>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-398-db.dts b/arch/arm/boot/dts/armada-398-db.dts index 2337f24784f7..fc28308e5bc5 100644 --- a/arch/arm/boot/dts/armada-398-db.dts +++ b/arch/arm/boot/dts/armada-398-db.dts @@ -51,31 +51,6 @@ status = "okay"; }; - flash@d0000 { - status = "okay"; - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - num-cs = <1>; - marvell,nand-keep-config; - marvell,nand-enable-arbiter; - nand-on-flash-bbt; - nand-ecc-strength = <8>; - nand-ecc-step-size = <512>; - - partition@0 { - label = "U-Boot"; - reg = <0 0x800000>; - }; - partition@800000 { - label = "Linux"; - reg = <0x800000 0x800000>; - }; - partition@1000000 { - label = "Filesystem"; - reg = <0x1000000 0x3f000000>; - }; - }; - usb3@f8000 { status = "okay"; }; @@ -122,3 +97,38 @@ }; }; }; + +&nand_controller { + status = "okay"; + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + marvell,nand-keep-config; + nand-on-flash-bbt; + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x800000>; + }; + partition@800000 { + label = "Linux"; + reg = <0x800000 0x800000>; + }; + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi index c1737c0a8325..f0c949831efb 100644 --- a/arch/arm/boot/dts/armada-39x.dtsi +++ b/arch/arm/boot/dts/armada-39x.dtsi @@ -367,11 +367,11 @@ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; }; - flash@d0000 { - compatible = "marvell,armada370-nand"; + nand_controller: nand-controller@d0000 { + compatible = "marvell,armada370-nand-controller"; reg = <0xd0000 0x54>; #address-cells = <1>; - #size-cells = <1>; + #size-cells = <0>; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; clocks = <&coredivclk 0>; status = "disabled"; diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi index a5da44fb35ed..8d708cc22495 100644 --- a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi +++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi @@ -306,6 +306,19 @@ &pinctrl { compatible = "marvell,98dx3236-pinctrl"; + nand_pins: nand-pins { + marvell,pins = "mpp20", "mpp21", "mpp22", + "mpp23", "mpp24", "mpp25", + "mpp26", "mpp27", "mpp28", + "mpp29", "mpp30"; + marvell,function = "dev"; + }; + + nand_rb: nand-rb { + marvell,pins = "mpp19"; + marvell,function = "nand"; + }; + spi0_pins: spi0-pins { marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3"; diff --git a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts index 4c64923f1c52..f42fc6118b7c 100644 --- a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts +++ b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts @@ -70,9 +70,9 @@ &nand { status = "okay"; + label = "pxa3xx_nand-0"; num-cs = <1>; marvell,nand-keep-config; - marvell,nand-enable-arbiter; nand-on-flash-bbt; nand-ecc-strength = <4>; nand-ecc-step-size = <512>; diff --git a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts index a0ebb52683f1..8432f517e346 100644 --- a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts +++ b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts @@ -69,9 +69,9 @@ &nand { status = "okay"; + label = "pxa3xx_nand-0"; num-cs = <1>; marvell,nand-keep-config; - marvell,nand-enable-arbiter; nand-on-flash-bbt; nand-ecc-strength = <4>; nand-ecc-step-size = <512>; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index 73d3f5cb9828..f3ac7483afed 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -146,9 +146,9 @@ nand@d0000 { status = "okay"; + label = "pxa3xx_nand-0"; num-cs = <1>; marvell,nand-keep-config; - marvell,nand-enable-arbiter; nand-on-flash-bbt; partitions { diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index c143556bbb7b..1139e9469a83 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -162,9 +162,9 @@ nand@d0000 { status = "okay"; + label = "pxa3xx_nand-0"; num-cs = <1>; marvell,nand-keep-config; - marvell,nand-enable-arbiter; nand-on-flash-bbt; }; }; diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts index def62e9e835b..bbbb38888bb8 100644 --- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts +++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts @@ -83,9 +83,9 @@ nand@d0000 { status = "okay"; + label = "pxa3xx_nand-0"; num-cs = <1>; marvell,nand-keep-config; - marvell,nand-enable-arbiter; nand-on-flash-bbt; partitions { diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts index f8b60d937818..7a2606c3b62e 100644 --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts @@ -165,79 +165,6 @@ bm@c8000 { status = "okay"; }; - - nand@d0000 { - status = "okay"; - num-cs = <1>; - marvell,nand-keep-config; - marvell,nand-enable-arbiter; - nand-on-flash-bbt; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x100000>; /* 1MB */ - read-only; - }; - - partition@100000 { - label = "u_env"; - reg = <0x100000 0x40000>; /* 256KB */ - }; - - partition@140000 { - label = "s_env"; - reg = <0x140000 0x40000>; /* 256KB */ - }; - - partition@900000 { - label = "devinfo"; - reg = <0x900000 0x100000>; /* 1MB */ - read-only; - }; - - /* kernel1 overlaps with rootfs1 by design */ - partition@a00000 { - label = "kernel1"; - reg = <0xa00000 0x2800000>; /* 40MB */ - }; - - partition@d00000 { - label = "rootfs1"; - reg = <0xd00000 0x2500000>; /* 37MB */ - }; - - /* kernel2 overlaps with rootfs2 by design */ - partition@3200000 { - label = "kernel2"; - reg = <0x3200000 0x2800000>; /* 40MB */ - }; - - partition@3500000 { - label = "rootfs2"; - reg = <0x3500000 0x2500000>; /* 37MB */ - }; - - /* - * 38MB, last MB is for the BBT, not writable - */ - partition@5a00000 { - label = "syscfg"; - reg = <0x5a00000 0x2600000>; - }; - - /* - * Unused area between "s_env" and "devinfo". - * Moved here because otherwise the renumbered - * partitions would break the bootloader - * supplied bootargs - */ - partition@180000 { - label = "unused_area"; - reg = <0x180000 0x780000>; /* 7.5MB */ - }; - }; }; bm-bppi { @@ -434,3 +361,86 @@ }; }; }; + +&nand_controller { + status = "okay"; + + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + marvell,nand-keep-config; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; /* 1MB */ + read-only; + }; + + partition@100000 { + label = "u_env"; + reg = <0x100000 0x40000>; /* 256KB */ + }; + + partition@140000 { + label = "s_env"; + reg = <0x140000 0x40000>; /* 256KB */ + }; + + partition@900000 { + label = "devinfo"; + reg = <0x900000 0x100000>; /* 1MB */ + read-only; + }; + + /* kernel1 overlaps with rootfs1 by design */ + partition@a00000 { + label = "kernel1"; + reg = <0xa00000 0x2800000>; /* 40MB */ + }; + + partition@d00000 { + label = "rootfs1"; + reg = <0xd00000 0x2500000>; /* 37MB */ + }; + + /* kernel2 overlaps with rootfs2 by design */ + partition@3200000 { + label = "kernel2"; + reg = <0x3200000 0x2800000>; /* 40MB */ + }; + + partition@3500000 { + label = "rootfs2"; + reg = <0x3500000 0x2500000>; /* 37MB */ + }; + + /* + * 38MB, last MB is for the BBT, not writable + */ + partition@5a00000 { + label = "syscfg"; + reg = <0x5a00000 0x2600000>; + }; + + /* + * Unused area between "s_env" and "devinfo". + * Moved here because otherwise the renumbered + * partitions would break the bootloader + * supplied bootargs + */ + partition@180000 { + label = "unused_area"; + reg = <0x180000 0x780000>; /* 7.5MB */ + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts index c350b1cf5201..8ea73587db81 100644 --- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts +++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts @@ -117,46 +117,6 @@ nr-ports = <2>; status = "okay"; }; - - nand@d0000 { - status = "okay"; - num-cs = <1>; - marvell,nand-keep-config; - marvell,nand-enable-arbiter; - nand-on-flash-bbt; - - /* Use Hardware BCH ECC */ - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x180000>; /* 1.5MB */ - read-only; - }; - - partition@180000 { - label = "u-boot-env"; - reg = <0x180000 0x20000>; /* 128KB */ - read-only; - }; - - partition@200000 { - label = "uImage"; - reg = <0x0200000 0x600000>; /* 6MB */ - }; - - partition@800000 { - label = "minirootfs"; - reg = <0x0800000 0x400000>; /* 4MB */ - }; - - /* Last MB is for the BBT, i.e. not writable */ - partition@c00000 { - label = "ubifs"; - reg = <0x0c00000 0x7400000>; /* 116MB */ - }; - }; }; }; @@ -345,3 +305,53 @@ marvell,function = "gpio"; }; }; + +&nand_controller { + status = "okay"; + + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + marvell,nand-keep-config; + nand-on-flash-bbt; + + /* Use Hardware BCH ECC */ + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x180000>; /* 1.5MB */ + read-only; + }; + + partition@180000 { + label = "u-boot-env"; + reg = <0x180000 0x20000>; /* 128KB */ + read-only; + }; + + partition@200000 { + label = "uImage"; + reg = <0x0200000 0x600000>; /* 6MB */ + }; + + partition@800000 { + label = "minirootfs"; + reg = <0x0800000 0x400000>; /* 4MB */ + }; + + /* Last MB is for the BBT, i.e. not writable */ + partition@c00000 { + label = "ubifs"; + reg = <0x0c00000 0x7400000>; /* 116MB */ + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts index 91a36c1f029b..ede11c597673 100644 --- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts @@ -79,3 +79,21 @@ reg = <0x4d>; }; }; + +&ehci0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2ah_default>; +}; + +&ehci1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2bh_default>; +}; + +&uhci { + status = "okay"; + + /* No pinctrl, this follows the above EHCI settings */ +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts b/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts new file mode 100644 index 000000000000..7a291de02543 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts @@ -0,0 +1,129 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2017 Intel Corporation +/dts-v1/; + +#include "aspeed-g5.dtsi" + +/ { + model = "S2600WF BMC"; + compatible = "intel,s2600wf-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "earlyprintk"; + }; + + memory { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vga_memory: framebuffer@7f000000 { + no-map; + reg = <0x7f000000 0x01000000>; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>, + <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>, + <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>; + }; + +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + }; +}; + +&uart5 { + status = "okay"; +}; + +&mac0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + use-ncsi; +}; + +&mac1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; +}; + +&gfx { + status = "okay"; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default + &pinctrl_pwm2_default &pinctrl_pwm3_default + &pinctrl_pwm4_default &pinctrl_pwm5_default + &pinctrl_pwm6_default &pinctrl_pwm7_default>; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts b/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts new file mode 100644 index 000000000000..d598b6391362 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts @@ -0,0 +1,325 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2018 Inventec Corporation +/dts-v1/; + +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "Lanyang BMC"; + compatible = "inventec,lanyang-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory { + reg = <0x80000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + flash_memory: region@98000000 { + no-map; + reg = <0x98000000 0x04000000>; /* 64M */ + }; + }; + + leds { + compatible = "gpio-leds"; + + sys_boot_status { + label = "System_boot_status"; + gpios = <&gpio ASPEED_GPIO(B, 6) GPIO_ACTIVE_LOW>; + }; + + attention { + label = "Attention_locator"; + gpios = <&gpio ASPEED_GPIO(B, 7) GPIO_ACTIVE_HIGH>; + }; + + plt_fault { + label = "Platform_fault"; + gpios = <&gpio ASPEED_GPIO(B, 1) GPIO_ACTIVE_HIGH>; + }; + + hdd_fault { + label = "Onboard_drive_fault"; + gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_HIGH>; + }; + bmc_err { + lable = "BMC_fault"; + gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>; + }; + + sys_err { + lable = "Sys_fault"; + gpios = <&gpio ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>; + }; + }; + + fsi: gpio-fsi { + compatible = "fsi-master-gpio", "fsi-master"; + #address-cells = <2>; + #size-cells = <0>; + + clock-gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>; + trans-gpios = <&gpio ASPEED_GPIO(D, 5) GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>; + mux-gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>, + <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>, + <&adc 13>, <&adc 14>, <&adc 15>; + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 12>; + }; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default + &pinctrl_pwm2_default &pinctrl_pwm3_default>; + + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + + fan@1 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x01>; + }; + + fan@2 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x02>; + }; + + fan@3 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x03>; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + label = "pnor"; + m25p,fast-read; + }; +}; + +&spi2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2ck_default + &pinctrl_spi2cs0_default + &pinctrl_spi2cs1_default + &pinctrl_spi2miso_default + &pinctrl_spi2mosi_default>; + + flash@0 { + status = "okay"; + }; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default>; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi1>; +}; + +&lpc_snoop { + status = "okay"; + snoop-ports = <0x80>; +}; + +&uart5 { + status = "okay"; +}; + +&mac0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + use-ncsi; +}; + +&mac1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&i2c0 { + status = "okay"; + + eeprom@55 { + compatible = "atmel,24c64"; + reg = <0x55>; + pagesize = <32>; + }; + + rtc@68 { + compatible = "nxp,pcf8523"; + reg = <0x68>; + }; + + tmp75@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; +}; + +&vuart { + status = "okay"; +}; + +&gfx { + status = "okay"; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&gpio { + pin_gpio_b0 { + gpio-hog; + gpios = <ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "BMC_HDD1_PWR_EN"; + }; + + pin_gpio_b5 { + gpio-hog; + gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>; + input; + line-name = "BMC_USB1_OCI2"; + }; + + pin_gpio_h5 { + gpio-hog; + gpios = <ASPEED_GPIO(H, 5) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "BMC_CP0_PERST_ENABLE_R"; + }; + + pin_gpio_z2 { + gpio-hog; + gpios = <ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "RST_PCA9546_U177_N"; + }; + + pin_gpio_aa6 { + gpio-hog; + gpios = <ASPEED_GPIO(AA, 6) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "BMC_CP0_RESET_N"; + }; + + pin_gpio_aa7 { + gpio-hog; + gpios = <ASPEED_GPIO(AA, 7) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "BMC_TPM_RESET_N"; + }; + + pin_gpio_ab0 { + gpio-hog; + gpios = <ASPEED_GPIO(AB, 0) GPIO_ACTIVE_LOW>; + output-high; + line-name = "BMC_USB_PWRON_N"; + }; +}; + +&ibt { + status = "okay"; +}; + +&adc { + status = "okay"; +}; + diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts index 51bc6a2e9dd5..389f5f83bef9 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts @@ -68,6 +68,12 @@ gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(J, 2)>; }; + + id-button { + label = "id-button"; + gpios = <&gpio ASPEED_GPIO(Q, 7) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(Q, 7)>; + }; }; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts index 7056231cbee6..78a511e6e482 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts @@ -28,6 +28,34 @@ }; }; + gpio-keys { + compatible = "gpio-keys"; + + air-water { + label = "air-water"; + gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(B, 5)>; + }; + + checkstop { + label = "checkstop"; + gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(J, 2)>; + }; + + ps0-presence { + label = "ps0-presence"; + gpios = <&gpio ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(P, 7)>; + }; + + ps1-presence { + label = "ps1-presence"; + gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(N, 0)>; + }; + }; + gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>; @@ -547,6 +575,10 @@ pinctrl-0 = <&pinctrl_wdtrst1_default>; }; +&wdt2 { + aspeed,alt-boot; +}; + &ibt { status = "okay"; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts index ebe726a0d311..ccbf645ab84d 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts @@ -55,6 +55,12 @@ gpios = <&gpio ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(F, 7)>; }; + + pcie-e2b-present{ + label = "pcie-e2b-present"; + gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(E, 7)>; + }; }; leds { diff --git a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts new file mode 100644 index 000000000000..43ed13963d35 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts @@ -0,0 +1,159 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2017 Facebook Inc. +/dts-v1/; + +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "Portwell Neptune BMC"; + compatible = "portwell,neptune-bmc", "aspeed,ast2500"; + aliases { + serial0 = &uart1; + serial4 = &uart5; + }; + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory { + reg = <0x80000000 0x20000000>; + }; + + leds { + compatible = "gpio-leds"; + postcode0 { + label="BMC_UP"; + gpios = <&gpio ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + postcode1 { + label="BMC_HB"; + gpios = <&gpio ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + postcode2 { + label="FAULT"; + gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + }; + // postcode3-7 are GPIOH3-H7 + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + }; +}; + +&uart1 { + // Host Console + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default>; +}; + +&uart5 { + // BMC Console + status = "okay"; +}; + +&mac0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default + &pinctrl_mdio1_default>; +}; + +&mac1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii2_default>; + use-ncsi; +}; + +&i2c1 { + status = "okay"; + // To PCIe slot SMBUS +}; + +&i2c2 { + status = "okay"; + // To LAN I210 +}; + +&i2c3 { + status = "okay"; + // SMBus to COMe AB +}; + +&i2c4 { + status = "okay"; + // I2C to COMe AB +}; + +&i2c5 { + status = "okay"; +// USB Debug card + pca9555@27 { + compatible = "nxp,pca9555"; + reg = <0x27>; + }; +}; + +&i2c6 { + status = "okay"; + tpm@20 { + compatible = "infineon,slb9645tt"; + reg = <0x20>; + }; + tmp421@4e { + compatible = "ti,tmp421"; + reg = <0x4e>; + }; + tmp421@4f { + compatible = "ti,tmp421"; + reg = <0x4f>; + }; +}; + +&i2c8 { + status = "okay"; + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + pagesize = <32>; + }; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>; + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + + fan@1 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x01>; + }; +}; diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index 518d2bc7c7fc..75df1573380e 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -108,6 +108,23 @@ status = "disabled"; }; + ehci0: usb@1e6a1000 { + compatible = "aspeed,ast2400-ehci", "generic-ehci"; + reg = <0x1e6a1000 0x100>; + interrupts = <5>; + clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; + status = "disabled"; + }; + + uhci: usb@1e6b0000 { + compatible = "aspeed,ast2400-uhci", "generic-uhci"; + reg = <0x1e6b0000 0x100>; + interrupts = <14>; + #ports = <3>; + clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>; + status = "disabled"; + }; + apb { compatible = "simple-bus"; #address-cells = <1>; @@ -125,6 +142,14 @@ pinctrl: pinctrl { compatible = "aspeed,g4-pinctrl"; }; + + }; + + rng: hwrng@1e6e2078 { + compatible = "timeriomem_rng"; + reg = <0x1e6e2078 0x4>; + period = <1>; + quality = <100>; }; adc: adc@1e6e9000 { @@ -1250,6 +1275,16 @@ groups = "USBCKI"; }; + pinctrl_usb2h_default: usb2h_default { + function = "USB2H1"; + groups = "USB2H1"; + }; + + pinctrl_usb2d_default: usb2d_default { + function = "USB2D1"; + groups = "USB2D1"; + }; + pinctrl_vgabios_rom_default: vgabios_rom_default { function = "VGABIOS_ROM"; groups = "VGABIOS_ROM"; diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index f9917717dd08..17f2714d18a7 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -143,6 +143,31 @@ status = "disabled"; }; + ehci0: usb@1e6a1000 { + compatible = "aspeed,ast2500-ehci", "generic-ehci"; + reg = <0x1e6a1000 0x100>; + interrupts = <5>; + clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; + status = "disabled"; + }; + + ehci1: usb@1e6a3000 { + compatible = "aspeed,ast2500-ehci", "generic-ehci"; + reg = <0x1e6a3000 0x100>; + interrupts = <13>; + clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>; + status = "disabled"; + }; + + uhci: usb@1e6b0000 { + compatible = "aspeed,ast2500-uhci", "generic-uhci"; + reg = <0x1e6b0000 0x100>; + interrupts = <14>; + #ports = <2>; + clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>; + status = "disabled"; + }; + apb { compatible = "simple-bus"; #address-cells = <1>; @@ -164,6 +189,13 @@ }; }; + rng: hwrng@1e6e2078 { + compatible = "timeriomem_rng"; + reg = <0x1e6e2078 0x4>; + period = <1>; + quality = <100>; + }; + gfx: display@1e6e6000 { compatible = "aspeed,ast2500-gfx", "syscon"; reg = <0x1e6e6000 0x1000>; @@ -1380,6 +1412,21 @@ groups = "USBCKI"; }; + pinctrl_usb2ah_default: usb2ah_default { + function = "USB2AH"; + groups = "USB2AH"; + }; + + pinctrl_usb11bhid_default: usb11bhid_default { + function = "USB11BHID"; + groups = "USB11BHID"; + }; + + pinctrl_usb2bh_default: usb2bh_default { + function = "USB2BH"; + groups = "USB2BH"; + }; + pinctrl_vgabiosrom_default: vgabiosrom_default { function = "VGABIOSROM"; groups = "VGABIOSROM"; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index e4bbb7e0f793..fcc85d70f36e 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -232,7 +232,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>; interrupt-parent = <&pioA>; - interrupts = <PIN_PB13 GPIO_ACTIVE_LOW>; + interrupts = <PIN_PB13 IRQ_TYPE_EDGE_RISING>; active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>; active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts index 7887a7160a54..0702a2f2b336 100644 --- a/arch/arm/boot/dts/at91-sama5d4ek.dts +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts @@ -129,8 +129,8 @@ wakeup-source; }; - atmel_mxt_ts@4c { - compatible = "atmel,atmel_mxt_ts"; + touchscreen@4c { + compatible = "atmel,maxtouch"; reg = <0x4c>; interrupt-parent = <&pioE>; interrupts = <24 0x0>; diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts index aa1fc7babfea..2cd9c5e4f892 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts @@ -101,6 +101,12 @@ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; }; +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_gpio14>; diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts index 425f6b0a5ef8..067d1f07a2d3 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-a.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts @@ -96,6 +96,12 @@ hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; }; +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_gpio14>; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts index effa195e7895..cfbdaacbaeba 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts @@ -103,6 +103,12 @@ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; }; +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_gpio14>; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts index 772ec3b48231..5641d162dfdb 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts @@ -96,6 +96,12 @@ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; }; +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_gpio14>; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index 434483d6fc14..31ff602e2cd3 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -91,6 +91,12 @@ hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; }; +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_gpio14>; diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi index 6c3cfaa77f3d..cb2d6d78a7fb 100644 --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi @@ -83,12 +83,6 @@ bus-width = <4>; }; -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>; - status = "okay"; -}; - &usb { power-domains = <&power RPI_POWER_DOMAIN_USB>; }; diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts index 5c339adabdf0..2fef70a09953 100644 --- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts +++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts @@ -41,6 +41,12 @@ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; }; +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_gpio14>; diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts new file mode 100644 index 000000000000..4adb85e66be3 --- /dev/null +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts @@ -0,0 +1,108 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2837.dtsi" +#include "bcm2835-rpi.dtsi" +#include "bcm283x-rpi-lan7515.dtsi" +#include "bcm283x-rpi-usb-host.dtsi" + +/ { + compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837"; + model = "Raspberry Pi 3 Model B+"; + + chosen { + /* 8250 auxiliary UART instead of pl011 */ + stdout-path = "serial1:115200n8"; + }; + + memory { + reg = <0 0x40000000>; + }; + + leds { + act { + gpios = <&gpio 29 GPIO_ACTIVE_HIGH>; + }; + + pwr { + label = "PWR"; + gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; + }; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&expgpio 1 GPIO_ACTIVE_HIGH>; + }; +}; + +&firmware { + expgpio: gpio { + compatible = "raspberrypi,firmware-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "BT_ON", + "WL_ON", + "STATUS_LED", + "LAN_RUN", + "", + "CAM_GPIO0", + "CAM_GPIO1", + ""; + status = "okay"; + }; +}; + +&hdmi { + hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>; + status = "okay"; +}; + +/* SDHCI is used to control the SDIO for wireless */ +&sdhci { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_gpio34>; + status = "okay"; + bus-width = <4>; + non-removable; + mmc-pwrseq = <&wifi_pwrseq>; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* SDHOST is used to drive the SD card */ +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + status = "okay"; + bus-width = <4>; +}; + +/* uart0 communicates with the BT module */ +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <2000000>; + shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; + }; +}; + +/* uart1 is mapped to the pin header */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_gpio14>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts index 0b31d995a066..c318bcbc6ba7 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts @@ -20,9 +20,14 @@ leds { act { - gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; + gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>; }; }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&expgpio 1 GPIO_ACTIVE_HIGH>; + }; }; &firmware { @@ -42,6 +47,16 @@ }; }; +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>; + status = "okay"; +}; + +&hdmi { + hpd-gpios = <&expgpio 4 GPIO_ACTIVE_LOW>; +}; + /* uart0 communicates with the BT module */ &uart0 { pinctrl-names = "default"; @@ -51,6 +66,7 @@ bluetooth { compatible = "brcm,bcm43438-bt"; max-speed = <2000000>; + shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; }; }; @@ -63,11 +79,19 @@ /* SDHCI is used to control the SDIO for wireless */ &sdhci { + #address-cells = <1>; + #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&emmc_gpio34>; status = "okay"; bus-width = <4>; non-removable; + mmc-pwrseq = <&wifi_pwrseq>; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; }; /* SDHOST is used to drive the SD card */ diff --git a/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi b/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi new file mode 100644 index 000000000000..9403da0990d0 --- /dev/null +++ b/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: GPL-2.0 +/ { + aliases { + ethernet0 = ðernet; + }; +}; + +&usb { + usb-port@1 { + compatible = "usb424,2514"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + usb-port@1 { + compatible = "usb424,2514"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet: ethernet@1 { + compatible = "usb424,7800"; + reg = <1>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index ac00e730f898..61315cf734ef 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -136,6 +136,7 @@ rng@7e104000 { compatible = "brcm,bcm2835-rng"; reg = <0x7e104000 0x10>; + interrupts = <2 29>; }; mailbox: mailbox@7e00b880 { diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts index 4175174e589a..ff2e551b9058 100644 --- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts @@ -1,20 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Broadcom BCM470X / BCM5301X ARM platform code. * DTS for Asus RT-AC56U * * Copyright (C) 2015 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH - * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY - * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, - * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM - * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE - * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts index 8fa033fea959..3bcc03788f38 100644 --- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts @@ -1,20 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Broadcom BCM470X / BCM5301X ARM platform code. * DTS for Asus RT-AC68U * * Copyright (C) 2015 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH - * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY - * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, - * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM - * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE - * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts index 8b64caabaad8..a587384f8e40 100644 --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Broadcom BCM470X / BCM5301X ARM platform code. * DTS for Buffalo WZR-1750DHP * * Copyright (C) 2014 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> - * - * Licensed under the GNU/GPL. See COPYING for details. */ /dts-v1/; diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts index 126ab5867772..6c8f0ad82332 100644 --- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts +++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts @@ -1,7 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Copyright (C) 2017 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> - * - * Licensed under the ISC license. */ /dts-v1/; diff --git a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts index f591b0f256d8..ebda45fe9ea4 100644 --- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts +++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts @@ -1,7 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Copyright 2016 Luxul Inc. - * - * Licensed under the ISC license. */ /dts-v1/; diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts index 50d65d8fbd9a..9dd0e22c906a 100644 --- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts +++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Broadcom BCM470X / BCM5301X ARM platform code. * DTS for Luxul XWC-1000 * * Copyright 2014 Luxul Inc. - * - * Licensed under the GNU/GPL. See COPYING for details. */ /dts-v1/; @@ -26,9 +25,15 @@ nand: nand@18028000 { nandcs@0 { - partition@0 { - label = "ubi"; - reg = <0x00000000 0x08000000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ubi"; + reg = <0x00000000 0x08000000>; + }; }; }; }; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts index bb66cebe0bd8..2642494c97a1 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts @@ -1,20 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Broadcom BCM470X / BCM5301X ARM platform code. * DTS for Netgear R6300 V2 * * Copyright (C) 2014 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH - * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY - * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, - * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM - * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE - * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts index 83a4c60bb431..e7b09b7b7d25 100644 --- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts +++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Broadcom BCM470X / BCM5301X arm platform code. * DTS for SmartRG SR400ac * * Copyright (C) 2015 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> - * - * Licensed under the GNU/GPL. See COPYING for details. */ /dts-v1/; diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts index 0800a964f2fe..16314fcc6e56 100644 --- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts +++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts @@ -1,20 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Broadcom BCM470X / BCM5301X ARM platform code. * DTS for Asus RT-N18U * * Copyright (C) 2014 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH - * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY - * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, - * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM - * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE - * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts index c2af33eb47de..328aa90240ce 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts @@ -1,20 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Broadcom BCM470X / BCM5301X ARM platform code. * DTS for Buffalo WZR-600DHP2 * * Copyright (C) 2014 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH - * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY - * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, - * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM - * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE - * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts index 87ea6ba664f5..8ea46eed26e2 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts @@ -1,20 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Broadcom BCM470X / BCM5301X ARM platform code. * DTS for Buffalo WZR-900DHP * * Copyright (C) 2015 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH - * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY - * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, - * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM - * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE - * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts index 9b5759849983..5eeac7302329 100644 --- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts +++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts @@ -1,7 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Copyright 2017 Luxul Inc. - * - * Licensed under the ISC license. */ /dts-v1/; diff --git a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts index ba1c19b1b3eb..da4d9ec62fc6 100644 --- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts +++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts @@ -1,7 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Copyright 2017 Luxul Inc. - * - * Licensed under the ISC license. */ /dts-v1/; diff --git a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts index 3ed8de42cb48..c94c732188fb 100644 --- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts +++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts @@ -1,7 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Copyright (C) 2017 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> - * - * Licensed under the ISC license. */ /dts-v1/; diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts index df473cc41572..22271818f901 100644 --- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts +++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts @@ -1,20 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Broadcom BCM470X / BCM5301X ARM platform code. * DTS for Asus RT-AC87U * * Copyright (C) 2015 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH - * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY - * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, - * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM - * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE - * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts index 92058c73ee59..79a9633ec417 100644 --- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts +++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Broadcom BCM470X / BCM5301X ARM platform code. * DTS for Buffalo WXR-1900DHP * * Copyright (C) 2015 Felix Fietkau <nbd@openwrt.org> - * - * Licensed under the GNU/GPL. See COPYING for details. */ /dts-v1/; diff --git a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts index 3d1d9c2c4efc..db744a5e122d 100644 --- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts +++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts @@ -1,7 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Copyright (C) 2017 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> - * - * Licensed under the ISC license. */ /dts-v1/; diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts index f43ab4721456..9e267d38df4c 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts @@ -1,20 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Broadcom BCM470X / BCM5301X ARM platform code. * DTS for Netgear R7000 * * Copyright (C) 2015 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH - * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY - * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, - * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM - * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE - * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts index ec4a50e440f6..f5bf6586ae07 100644 --- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts +++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts @@ -1,7 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Copyright (C) 2016 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> - * - * Licensed under the ISC license. */ /dts-v1/; diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts index 7cc7d344fe5b..d173bcd93b91 100644 --- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts @@ -1,20 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Broadcom BCM470X / BCM5301X ARM platform code. * DTS for D-Link DIR-885L * * Copyright (C) 2016 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH - * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY - * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, - * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM - * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE - * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. */ /dts-v1/; @@ -37,9 +26,15 @@ nand: nand@18028000 { nandcs@0 { - partition@0 { - label = "firmware"; - reg = <0x00000000 0x08000000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "firmware"; + reg = <0x00000000 0x08000000>; + }; }; }; }; diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts index b6750f70dffb..f47afe36d857 100644 --- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts +++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts @@ -1,7 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Copyright (C) 2017 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> - * - * Licensed under the ISC license. */ /dts-v1/; diff --git a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts index ecd22a246746..a5cef51cfe4f 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts @@ -1,7 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Copyright (C) 2017 Luxul Inc. - * - * Licensed under the ISC license. */ /dts-v1/; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts new file mode 100644 index 000000000000..7fd85475893d --- /dev/null +++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2018 Luxul Inc. + */ + +/dts-v1/; + +#include "bcm47094.dtsi" + +/ { + compatible = "luxul,xap-1610-v1", "brcm,bcm47094", "brcm,bcm4708"; + model = "Luxul XAP-1610 V1"; + + chosen { + bootargs = "earlycon"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + + 2ghz { + label = "bcm53xx:blue:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + }; + + 5ghz { + label = "bcm53xx:blue:5ghz"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&spi_nor { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts index 15ffb1abc440..7496aabf8f77 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts @@ -1,7 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Copyright (C) 2017 Luxul Inc. - * - * Licensed under the ISC license. */ /dts-v1/; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts index bc1d1e10d4ac..53aaa5212610 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts @@ -1,7 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Copyright 2016 Luxul Inc. - * - * Licensed under the ISC license. */ /dts-v1/; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts new file mode 100644 index 000000000000..bdad7267255a --- /dev/null +++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts @@ -0,0 +1,77 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2018 Luxul Inc. + */ + +/dts-v1/; + +#include "bcm47094.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "luxul,xwr-3150-v1", "brcm,bcm47094", "brcm,bcm4708"; + model = "Luxul XWR-3150 V1"; + + chosen { + bootargs = "earlycon"; + }; + + memory { + reg = <0x00000000 0x08000000 + 0x88000000 0x18000000>; + }; + + leds { + compatible = "gpio-leds"; + + power { + label = "bcm53xx:green:power"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + usb3 { + label = "bcm53xx:green:usb3"; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, + <&xhci_port1>; + linux,default-trigger = "usbport"; + }; + + status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + + 2ghz { + label = "bcm53xx:green:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + }; + + 5ghz { + label = "bcm53xx:green:5ghz"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb3 { + vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; +}; + +&spi_nor { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts index 859929973158..0e718edc065a 100644 --- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts +++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts @@ -1,7 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Copyright (C) 2016 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> - * - * Licensed under the ISC license. */ /dts-v1/; diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi index 24b099c00f13..c349e8f0afc5 100644 --- a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi +++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Broadcom Northstar NAND. * * Copyright (C) 2016 RafaÅ‚ MiÅ‚ecki <rafal.milecki@gmail.com> - * - * Licensed under the ISC license. */ #include "bcm5301x-nand-cs0.dtsi" diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi index b4e875df9528..18e25e302b13 100644 --- a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi +++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi @@ -1,7 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Copyright 2016 Luxul Inc. - * - * Licensed under the ISC license. */ #include "bcm5301x-nand-cs0.dtsi" diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi index 9a9630ded306..c8e56d30bd6f 100644 --- a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi +++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Broadcom BCM470X / BCM5301X Nand chip defaults. * @@ -5,8 +6,6 @@ * and uses 8 bit ECC. * * Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de> - * - * Licensed under the GNU/GPL. See COPYING for details. */ #include "bcm5301x-nand-cs0.dtsi" diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi index 168495106b82..e5a2d62daf92 100644 --- a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi +++ b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Broadcom Northstar NAND. * * Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de> - * - * Licensed under the GNU/GPL. See COPYING for details. */ / { diff --git a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts index 1c475796d17f..64a297759eb9 100644 --- a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts +++ b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts @@ -1,39 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) /* * Device Tree file for Sony NSZ-GS7 * * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi index d575823c5750..db67377af266 100644 --- a/arch/arm/boot/dts/berlin2.dtsi +++ b/arch/arm/boot/dts/berlin2.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) /* * Device Tree Include file for Marvell Armada 1500 (Berlin BG2) SoC * @@ -5,38 +6,6 @@ * * based on GPL'ed 2.6 kernel sources * (c) Marvell International Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/clock/berlin2.h> @@ -149,7 +118,7 @@ local-timer@ad0600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xad0600 0x20>; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>; clocks = <&chip_clk CLKID_TWD>; }; diff --git a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts index ca24def0ce13..56fa951bc86f 100644 --- a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts +++ b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts @@ -1,39 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) /* * Device Tree file for Google Chromecast * * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -52,22 +21,35 @@ memory@0 { device_type = "memory"; - reg = <0x00000000 0x20000000>; /* 512 MB */ + + /* + * We're using "linux,usable-memory" instead of "reg" here + * because the (signed and encrypted) bootloader that shipped + * with this device provides an incorrect memory range in + * ATAG_MEM. Linux helpfully overrides the "reg" property with + * data from the ATAG, so we can't specify the proper range + * normally. Fortunately, this alternate property is checked + * first by the OF driver, so we can (ab)use it instead. + */ + linux,usable-memory = <0x00000000 0x20000000>; /* 512 MB */ }; leds { - compatible = "gpio-leds"; + compatible = "pwm-leds"; + pinctrl-0 = <&ledpwm_pmux>; + pinctrl-names = "default"; white { label = "white"; - gpios = <&portc 1 GPIO_ACTIVE_HIGH>; - default-state = "keep"; + pwms = <&pwm 0 600000 0>; + max-brightness = <255>; + linux,default-trigger = "default-on"; }; red { label = "red"; - gpios = <&portc 2 GPIO_ACTIVE_HIGH>; - default-state = "keep"; + pwms = <&pwm 1 600000 0>; + max-brightness = <255>; }; }; }; @@ -86,3 +68,10 @@ &usb_phy1 { status = "okay"; }; &usb1 { status = "okay"; }; + +&soc_pinctrl { + ledpwm_pmux: ledpwm-pmux { + groups = "G0"; + function = "pwm"; + }; +}; diff --git a/arch/arm/boot/dts/berlin2cd-valve-steamlink.dts b/arch/arm/boot/dts/berlin2cd-valve-steamlink.dts new file mode 100644 index 000000000000..79ac842ae461 --- /dev/null +++ b/arch/arm/boot/dts/berlin2cd-valve-steamlink.dts @@ -0,0 +1,79 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2018 Alexander Monakov <amonakov@gmail.com> + */ +/dts-v1/; + +#include "berlin2cd.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Valve Steam Link"; + compatible = "valve,steamlink", "marvell,berlin2cd", "marvell,berlin"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* 512 MB */ + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&porta 6 GPIO_ACTIVE_HIGH>; + active-delay = <100>; + inactive-delay = <10>; + wait-delay = <100>; + priority = <200>; + }; +}; + +&cpu { + cpu-supply = <&vcpu>; + operating-points = < + /* kHz uV */ + 1000000 1325000 + >; +}; + +&i2c0 { + status = "okay"; + + /* There are two regulators on the board. One is accessible via I2C, + * with buck1 providing SoC power (set up by bootloader to 1.325V or + * less depending on leakage value in OTP), and buck2 likely used for + * DRAM (providing 1.35V). The other regulator on the opposite side + * of the board is probably supplying SDIO and NAND fixed voltages. */ + regulator@19 { + compatible = "marvell,88pg868"; + reg = <0x19>; + + vcpu: buck1 { + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1325000>; + }; + }; +}; + +/* Fixed interface to on-board Marvell 8897 Wi-Fi/Bluetooth/NFC chip. */ +&sdhci0 { + keep-power-in-suspend; + non-removable; + status = "okay"; +}; + +&uart0 { + /* RX/TX are routed to TP50/TP51 on the board. */ + status = "okay"; +}; + +/* The SoC is connected to on-board USB hub that in turn has one downstream + * port wired to the on-board Steam Controller wireless receiver chip. */ +&usb_phy1 { status = "okay"; }; + +&usb1 { + dr_mode = "host"; + status = "okay"; +}; + +ð1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi index 501c59d97eae..e5c1f4213ff9 100644 --- a/arch/arm/boot/dts/berlin2cd.dtsi +++ b/arch/arm/boot/dts/berlin2cd.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) /* * Device Tree Include file for Marvell Armada 1500-mini (Berlin BG2CD) SoC * @@ -5,38 +6,6 @@ * * based on GPL'ed 2.6 kernel sources * (c) Marvell International Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/clock/berlin2.h> @@ -57,7 +26,7 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu: cpu@0 { compatible = "arm,cortex-a9"; device_type = "cpu"; next-level-cache = <&l2>; @@ -73,6 +42,12 @@ }; }; + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + }; + refclk: oscillator { compatible = "fixed-clock"; #clock-cells = <0>; @@ -87,11 +62,6 @@ ranges = <0 0xf7000000 0x1000000>; - pmu { - compatible = "arm,cortex-a9-pmu"; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - }; - sdhci0: sdhci@ab0000 { compatible = "mrvl,pxav3-mmc"; reg = <0xab0000 0x200>; @@ -108,6 +78,11 @@ cache-level = <2>; }; + snoop-control-unit@ad0000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xad0000 0x100>; + }; + gic: interrupt-controller@ad1000 { compatible = "arm,cortex-a9-gic"; reg = <0xad1000 0x1000>, <0xad0100 0x0100>; @@ -115,10 +90,24 @@ #interrupt-cells = <3>; }; + global-timer@ad0200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0xad0200 0x20>; + interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>; + clocks = <&chip_clk CLKID_TWD>; + }; + local-timer@ad0600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xad0600 0x20>; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>; + clocks = <&chip_clk CLKID_TWD>; + }; + + local-wdt@ad0620 { + compatible = "arm,cortex-a9-twd-wdt"; + reg = <0xad0620 0x20>; + interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>; clocks = <&chip_clk CLKID_TWD>; }; @@ -254,6 +243,60 @@ }; }; + i2c0: i2c@1400 { + compatible = "snps,designware-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1400 0x100>; + interrupts = <16>; + clocks = <&chip_clk CLKID_CFG>; + status = "disabled"; + }; + + i2c1: i2c@1800 { + compatible = "snps,designware-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1800 0x100>; + interrupts = <17>; + clocks = <&chip_clk CLKID_CFG>; + status = "disabled"; + }; + + spi0: spi@1c00 { + compatible = "snps,dw-apb-ssi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1c00 0x100>; + interrupts = <4>; + clocks = <&chip_clk CLKID_CFG>; + status = "disabled"; + }; + + wdt4: watchdog@2000 { + compatible = "snps,dw-wdt"; + reg = <0x2000 0x100>; + clocks = <&chip_clk CLKID_CFG>; + interrupts = <5>; + status = "disabled"; + }; + + wdt5: watchdog@2400 { + compatible = "snps,dw-wdt"; + reg = <0x2400 0x100>; + clocks = <&chip_clk CLKID_CFG>; + interrupts = <6>; + status = "disabled"; + }; + + wdt6: watchdog@2800 { + compatible = "snps,dw-wdt"; + reg = <0x2800 0x100>; + clocks = <&chip_clk CLKID_CFG>; + interrupts = <7>; + status = "disabled"; + }; + timer0: timer@2c00 { compatible = "snps,dw-apb-timer"; reg = <0x2c00 0x14>; @@ -435,6 +478,36 @@ }; }; + spi1: spi@6000 { + compatible = "snps,dw-apb-ssi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x6000 0x100>; + clocks = <&refclk>; + interrupts = <5>; + status = "disabled"; + }; + + i2c2: i2c@7000 { + compatible = "snps,designware-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x7000 0x100>; + interrupts = <6>; + clocks = <&refclk>; + status = "disabled"; + }; + + i2c3: i2c@8000 { + compatible = "snps,designware-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x8000 0x100>; + interrupts = <7>; + clocks = <&refclk>; + status = "disabled"; + }; + sm_gpio0: gpio@c000 { compatible = "snps,dw-apb-gpio"; reg = <0xc000 0x400>; @@ -472,6 +545,16 @@ status = "disabled"; }; + uart2: serial@b000 { + compatible = "snps,dw-apb-uart"; + reg = <0xb000 0x100>; + reg-shift = <2>; + reg-io-width = <1>; + interrupts = <10>; + clocks = <&refclk>; + status = "disabled"; + }; + sysctrl: system-controller@d000 { compatible = "simple-mfd", "syscon"; reg = <0xd000 0x100>; @@ -479,6 +562,12 @@ sys_pinctrl: pin-controller { compatible = "marvell,berlin2cd-system-pinctrl"; }; + + adc: adc { + compatible = "marvell,berlin2-adc"; + interrupts = <12>, <14>; + interrupt-names = "adc", "tsen"; + }; }; sic: interrupt-controller@e000 { diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts index 57aa5f8a7c77..c162f98cb8e8 100644 --- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts +++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts @@ -1,37 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) /* * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index bf3a6c9a1d34..516a7ce25791 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -1,37 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) /* * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/clock/berlin2q.h> @@ -53,7 +22,7 @@ #size-cells = <0>; enable-method = "marvell,berlin-smp"; - cpu@0 { + cpu0: cpu@0 { compatible = "arm,cortex-a9"; device_type = "cpu"; next-level-cache = <&l2>; @@ -71,21 +40,21 @@ >; }; - cpu@1 { + cpu1: cpu@1 { compatible = "arm,cortex-a9"; device_type = "cpu"; next-level-cache = <&l2>; reg = <1>; }; - cpu@2 { + cpu2: cpu@2 { compatible = "arm,cortex-a9"; device_type = "cpu"; next-level-cache = <&l2>; reg = <2>; }; - cpu@3 { + cpu3: cpu@3 { compatible = "arm,cortex-a9"; device_type = "cpu"; next-level-cache = <&l2>; @@ -93,6 +62,19 @@ }; }; + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, + <&cpu1>, + <&cpu2>, + <&cpu3>; + }; + refclk: oscillator { compatible = "fixed-clock"; #clock-cells = <0>; @@ -107,14 +89,6 @@ ranges = <0 0xf7000000 0x1000000>; interrupt-parent = <&gic>; - pmu { - compatible = "arm,cortex-a9-pmu"; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; - }; - sdhci0: sdhci@ab0000 { compatible = "mrvl,pxav3-mmc"; reg = <0xab0000 0x200>; @@ -145,6 +119,7 @@ l2: l2-cache-controller@ac0000 { compatible = "arm,pl310-cache"; reg = <0xac0000 0x1000>; + cache-unified; cache-level = <2>; arm,data-latency = <2 2 2>; arm,tag-latency = <2 2 2>; @@ -159,7 +134,7 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0xad0600 0x20>; clocks = <&chip_clk CLKID_TWD>; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; }; gic: interrupt-controller@ad1000 { diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index 3962fa4b07f5..0e82bb988fde 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -27,143 +27,6 @@ spi0 = &spi1; }; - soc@1c00000 { - pmx_core: pinmux@14120 { - status = "okay"; - - mcasp0_pins: pinmux_mcasp0_pins { - pinctrl-single,bits = < - /* - * AHCLKX, ACLKX, AFSX, AHCLKR, ACLKR, - * AFSR, AMUTE - */ - 0x00 0x11111111 0xffffffff - /* AXR11, AXR12 */ - 0x04 0x00011000 0x000ff000 - >; - }; - nand_pins: nand_pins { - pinctrl-single,bits = < - /* EMA_WAIT[0], EMA_OE, EMA_WE, EMA_CS[4], EMA_CS[3] */ - 0x1c 0x10110110 0xf0ff0ff0 - /* - * EMA_D[0], EMA_D[1], EMA_D[2], - * EMA_D[3], EMA_D[4], EMA_D[5], - * EMA_D[6], EMA_D[7] - */ - 0x24 0x11111111 0xffffffff - /* EMA_A[1], EMA_A[2] */ - 0x30 0x01100000 0x0ff00000 - >; - }; - }; - serial0: serial@42000 { - status = "okay"; - }; - serial1: serial@10c000 { - status = "okay"; - }; - serial2: serial@10d000 { - status = "okay"; - }; - rtc0: rtc@23000 { - status = "okay"; - }; - i2c0: i2c@22000 { - status = "okay"; - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; - - tps: tps@48 { - reg = <0x48>; - }; - tlv320aic3106: tlv320aic3106@18 { - #sound-dai-cells = <0>; - compatible = "ti,tlv320aic3106"; - reg = <0x18>; - status = "okay"; - - /* Regulators */ - IOVDD-supply = <&vdcdc2_reg>; - /* Derived from VBAT: Baseboard 3.3V / 1.8V */ - AVDD-supply = <&vbat>; - DRVDD-supply = <&vbat>; - DVDD-supply = <&vbat>; - }; - tca6416: gpio@20 { - compatible = "ti,tca6416"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - }; - }; - wdt: wdt@21000 { - status = "okay"; - }; - mmc0: mmc@40000 { - max-frequency = <50000000>; - bus-width = <4>; - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>; - }; - spi1: spi@30e000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins &spi1_cs0_pin>; - flash: m25p80@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "m25p64"; - spi-max-frequency = <30000000>; - m25p,fast-read; - reg = <0>; - partition@0 { - label = "U-Boot-SPL"; - reg = <0x00000000 0x00010000>; - read-only; - }; - partition@1 { - label = "U-Boot"; - reg = <0x00010000 0x00080000>; - read-only; - }; - partition@2 { - label = "U-Boot-Env"; - reg = <0x00090000 0x00010000>; - read-only; - }; - partition@3 { - label = "Kernel"; - reg = <0x000a0000 0x00280000>; - }; - partition@4 { - label = "Filesystem"; - reg = <0x00320000 0x00400000>; - }; - partition@5 { - label = "MAC-Address"; - reg = <0x007f0000 0x00010000>; - read-only; - }; - }; - }; - mdio: mdio@224000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&mdio_pins>; - bus_freq = <2200000>; - }; - eth0: ethernet@220000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&mii_pins>; - }; - gpio: gpio@226000 { - status = "okay"; - }; - }; vbat: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vbat"; @@ -200,6 +63,155 @@ }; }; +&pmx_core { + status = "okay"; + + mcasp0_pins: pinmux_mcasp0_pins { + pinctrl-single,bits = < + /* + * AHCLKX, ACLKX, AFSX, AHCLKR, ACLKR, + * AFSR, AMUTE + */ + 0x00 0x11111111 0xffffffff + /* AXR11, AXR12 */ + 0x04 0x00011000 0x000ff000 + >; + }; + nand_pins: nand_pins { + pinctrl-single,bits = < + /* EMA_WAIT[0], EMA_OE, EMA_WE, EMA_CS[4], EMA_CS[3] */ + 0x1c 0x10110110 0xf0ff0ff0 + /* + * EMA_D[0], EMA_D[1], EMA_D[2], + * EMA_D[3], EMA_D[4], EMA_D[5], + * EMA_D[6], EMA_D[7] + */ + 0x24 0x11111111 0xffffffff + /* EMA_A[1], EMA_A[2] */ + 0x30 0x01100000 0x0ff00000 + >; + }; +}; + +&serial0 { + status = "okay"; +}; + +&serial1 { + status = "okay"; +}; + +&serial2 { + status = "okay"; +}; + +&rtc0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + tps: tps@48 { + reg = <0x48>; + }; + tlv320aic3106: tlv320aic3106@18 { + #sound-dai-cells = <0>; + compatible = "ti,tlv320aic3106"; + reg = <0x18>; + status = "okay"; + + /* Regulators */ + IOVDD-supply = <&vdcdc2_reg>; + /* Derived from VBAT: Baseboard 3.3V / 1.8V */ + AVDD-supply = <&vbat>; + DRVDD-supply = <&vbat>; + DVDD-supply = <&vbat>; + }; + tca6416: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&wdt { + status = "okay"; +}; + +&mmc0 { + max-frequency = <50000000>; + bus-width = <4>; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + cd-gpios = <&gpio 64 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio 65 GPIO_ACTIVE_HIGH>; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins &spi1_cs0_pin>; + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p64"; + spi-max-frequency = <30000000>; + m25p,fast-read; + reg = <0>; + partition@0 { + label = "U-Boot-SPL"; + reg = <0x00000000 0x00010000>; + read-only; + }; + partition@1 { + label = "U-Boot"; + reg = <0x00010000 0x00080000>; + read-only; + }; + partition@2 { + label = "U-Boot-Env"; + reg = <0x00090000 0x00010000>; + read-only; + }; + partition@3 { + label = "Kernel"; + reg = <0x000a0000 0x00280000>; + }; + partition@4 { + label = "Filesystem"; + reg = <0x00320000 0x00400000>; + }; + partition@5 { + label = "MAC-Address"; + reg = <0x007f0000 0x00010000>; + read-only; + }; + }; +}; + +&mdio { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + bus_freq = <2200000>; +}; + +ð0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mii_pins>; +}; + +&gpio { + status = "okay"; +}; + /include/ "tps6507x.dtsi" &tps { @@ -309,6 +321,18 @@ }; }; +&usb_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + &vpif { pinctrl-names = "default"; pinctrl-0 = <&vpif_capture_pins>, <&vpif_display_pins>; diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts index 1ffd87796cac..ee3932475ce7 100644 --- a/arch/arm/boot/dts/da850-lego-ev3.dts +++ b/arch/arm/boot/dts/da850-lego-ev3.dts @@ -33,11 +33,9 @@ */ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; label = "EV3 Brick Buttons"; pinctrl-names = "default"; - pinctrl-0 = <&button_pins>, <&button_bias>; + pinctrl-0 = <&button_bias>; center { label = "Center"; @@ -81,8 +79,6 @@ */ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins>; left_green { label = "led0:green:brick-status"; @@ -119,8 +115,6 @@ gpio-poweroff { compatible = "gpio-poweroff"; gpios = <&gpio 107 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&system_power_pin>; }; sound { @@ -136,8 +130,6 @@ * the sensor (input) ports, the motor (output) ports and the A/DC. */ vcc5v: regulator1 { - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v_pins>; compatible = "regulator-fixed"; regulator-name = "vcc5v"; regulator-min-microvolt = <5000000>; @@ -165,8 +157,6 @@ * This is the amplifier for the speaker. */ amp: regulator3 { - pinctrl-names = "default"; - pinctrl-0 = <&_pins>; compatible = "regulator-fixed"; regulator-name = "amp"; gpio = <&gpio 111 GPIO_ACTIVE_HIGH>; @@ -177,8 +167,6 @@ * The EV3 can use 6-AA batteries or a rechargeable Li-ion battery pack. */ battery { - pinctrl-names = "default"; - pinctrl-0 = <&battery_pins>; compatible = "lego,ev3-battery"; io-channels = <&adc 4>, <&adc 3>; io-channel-names = "voltage", "current"; @@ -206,73 +194,10 @@ &pmx_core { status = "okay"; - mmc0_cd_pin: pinmux_mmc0_cd { - pinctrl-single,bits = < - /* GP5[14] */ - 0x2C 0x00000080 0x000000f0 - >; - }; - - button_pins: pinmux_button_pins { - pinctrl-single,bits = < - /* GP1[13] */ - 0x8 0x00000800 0x00000f00 - /* GP6[10] */ - 0x34 0x00800000 0x00f00000 - /* GP6[6] */ - 0x38 0x00000080 0x000000f0 - /* GP7[12], GP7[14], GP7[15] */ - 0x40 0x00808800 0x00f0ff00 - >; - }; - - led_pins: pinmux_led_pins { - pinctrl-single,bits = < - /* GP6[12], GP6[13], GP6[14] */ - 0x34 0x00008880 0x0000fff0 - /* GP6[7] */ - 0x38 0x00000008 0x0000000f - >; - }; - - system_power_pin: pinmux_system_power { - pinctrl-single,bits = < - /* GP6[11] */ - 0x34 0x00080000 0x000f0000 - >; - }; - - vcc5v_pins: pinmux_vcc5v { - pinctrl-single,bits = < - /* GP6[5] */ - 0x40 0x00000080 0x000000f0 - /* GP6[3] */ - 0x4c 0x00008000 0x0000f000 - >; - }; - - amp_pins: pinmux_amp_pins { - pinctrl-single,bits = < - /* GP6[15] */ - 0x34 0x00000008 0x0000000f - >; - }; - - battery_pins: pinmux_battery_pins { - pinctrl-single,bits = < - /* GP0[6] */ - 0x04 0x00000080 0x000000f0 - /* GP8[8] */ - 0x4c 0x00000080 0x000000f0 - >; - }; - ev3_lcd_pins: pinmux_lcd { pinctrl-single,bits = < - /* SIMO, GP2[11], GP2[12], CLK */ - 0x14 0x00188100 0x00ffff00 - /* GP5[0] */ - 0x30 0x80000000 0xf0000000 + /* SIMO, CLK */ + 0x14 0x00100100 0x00f00f00 >; }; }; @@ -327,7 +252,7 @@ bus-width = <4>; cd-gpios = <&gpio 94 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin>; + pinctrl-0 = <&mmc0_pins>; }; &spi0 { diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index 12010002dbdb..f6f1597b03df 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -59,8 +59,18 @@ pinctrl-single,bit-per-mux; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0xf>; + /* pin base, nr pins & gpio function */ + pinctrl-single,gpio-range = <&range 0 17 0x8>, + <&range 17 8 0x4>, + <&range 26 8 0x4>, + <&range 34 80 0x8>, + <&range 129 31 0x8>; status = "disabled"; + range: gpio-range { + #pinctrl-single,gpio-range-cells = <3>; + }; + serial0_rtscts_pins: pinmux_serial0_rtscts_pins { pinctrl-single,bits = < /* UART0_RTS UART0_CTS */ @@ -549,6 +559,150 @@ status = "disabled"; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&pmx_core 0 15 1>, + <&pmx_core 1 14 1>, + <&pmx_core 2 13 1>, + <&pmx_core 3 12 1>, + <&pmx_core 4 11 1>, + <&pmx_core 5 10 1>, + <&pmx_core 6 9 1>, + <&pmx_core 7 8 1>, + <&pmx_core 8 7 1>, + <&pmx_core 9 6 1>, + <&pmx_core 10 5 1>, + <&pmx_core 11 4 1>, + <&pmx_core 12 3 1>, + <&pmx_core 13 2 1>, + <&pmx_core 14 1 1>, + <&pmx_core 15 0 1>, + <&pmx_core 16 39 1>, + <&pmx_core 17 38 1>, + <&pmx_core 18 37 1>, + <&pmx_core 19 36 1>, + <&pmx_core 20 35 1>, + <&pmx_core 21 34 1>, + <&pmx_core 22 33 1>, + <&pmx_core 23 32 1>, + <&pmx_core 24 24 1>, + <&pmx_core 25 22 1>, + <&pmx_core 26 21 1>, + <&pmx_core 27 20 1>, + <&pmx_core 28 19 1>, + <&pmx_core 29 18 1>, + <&pmx_core 30 17 1>, + <&pmx_core 31 16 1>, + <&pmx_core 32 55 1>, + <&pmx_core 33 54 1>, + <&pmx_core 34 53 1>, + <&pmx_core 35 52 1>, + <&pmx_core 36 51 1>, + <&pmx_core 37 50 1>, + <&pmx_core 38 49 1>, + <&pmx_core 39 48 1>, + <&pmx_core 40 47 1>, + <&pmx_core 41 46 1>, + <&pmx_core 42 45 1>, + <&pmx_core 43 44 1>, + <&pmx_core 44 43 1>, + <&pmx_core 45 42 1>, + <&pmx_core 46 41 1>, + <&pmx_core 47 40 1>, + <&pmx_core 48 71 1>, + <&pmx_core 49 70 1>, + <&pmx_core 50 69 1>, + <&pmx_core 51 68 1>, + <&pmx_core 52 67 1>, + <&pmx_core 53 66 1>, + <&pmx_core 54 65 1>, + <&pmx_core 55 64 1>, + <&pmx_core 56 63 1>, + <&pmx_core 57 62 1>, + <&pmx_core 58 61 1>, + <&pmx_core 59 60 1>, + <&pmx_core 60 59 1>, + <&pmx_core 61 58 1>, + <&pmx_core 62 57 1>, + <&pmx_core 63 56 1>, + <&pmx_core 64 87 1>, + <&pmx_core 65 86 1>, + <&pmx_core 66 85 1>, + <&pmx_core 67 84 1>, + <&pmx_core 68 83 1>, + <&pmx_core 69 82 1>, + <&pmx_core 70 81 1>, + <&pmx_core 71 80 1>, + <&pmx_core 72 70 1>, + <&pmx_core 73 78 1>, + <&pmx_core 74 77 1>, + <&pmx_core 75 76 1>, + <&pmx_core 76 75 1>, + <&pmx_core 77 74 1>, + <&pmx_core 78 73 1>, + <&pmx_core 79 72 1>, + <&pmx_core 80 103 1>, + <&pmx_core 81 102 1>, + <&pmx_core 82 101 1>, + <&pmx_core 83 100 1>, + <&pmx_core 84 99 1>, + <&pmx_core 85 98 1>, + <&pmx_core 86 97 1>, + <&pmx_core 87 96 1>, + <&pmx_core 88 95 1>, + <&pmx_core 89 94 1>, + <&pmx_core 90 93 1>, + <&pmx_core 91 92 1>, + <&pmx_core 92 91 1>, + <&pmx_core 93 90 1>, + <&pmx_core 94 89 1>, + <&pmx_core 95 88 1>, + <&pmx_core 96 158 1>, + <&pmx_core 97 157 1>, + <&pmx_core 98 156 1>, + <&pmx_core 99 155 1>, + <&pmx_core 100 154 1>, + <&pmx_core 101 129 1>, + <&pmx_core 102 113 1>, + <&pmx_core 103 112 1>, + <&pmx_core 104 111 1>, + <&pmx_core 105 110 1>, + <&pmx_core 106 109 1>, + <&pmx_core 107 108 1>, + <&pmx_core 108 107 1>, + <&pmx_core 109 106 1>, + <&pmx_core 110 105 1>, + <&pmx_core 111 104 1>, + <&pmx_core 112 145 1>, + <&pmx_core 113 144 1>, + <&pmx_core 114 143 1>, + <&pmx_core 115 142 1>, + <&pmx_core 116 141 1>, + <&pmx_core 117 140 1>, + <&pmx_core 118 139 1>, + <&pmx_core 119 138 1>, + <&pmx_core 120 137 1>, + <&pmx_core 121 136 1>, + <&pmx_core 122 135 1>, + <&pmx_core 123 134 1>, + <&pmx_core 124 133 1>, + <&pmx_core 125 132 1>, + <&pmx_core 126 131 1>, + <&pmx_core 127 130 1>, + <&pmx_core 128 159 1>, + <&pmx_core 129 31 1>, + <&pmx_core 130 30 1>, + <&pmx_core 131 20 1>, + <&pmx_core 132 28 1>, + <&pmx_core 133 27 1>, + <&pmx_core 134 26 1>, + <&pmx_core 135 23 1>, + <&pmx_core 136 153 1>, + <&pmx_core 137 152 1>, + <&pmx_core 138 151 1>, + <&pmx_core 139 150 1>, + <&pmx_core 140 149 1>, + <&pmx_core 141 148 1>, + <&pmx_core 142 147 1>, + <&pmx_core 143 146 1>; }; pinconf: pin-controller@22c00c { compatible = "ti,da850-pupd"; diff --git a/arch/arm/boot/dts/dm8148-t410.dts b/arch/arm/boot/dts/dm8148-t410.dts index 6418f9cdbe83..c46a227b543d 100644 --- a/arch/arm/boot/dts/dm8148-t410.dts +++ b/arch/arm/boot/dts/dm8148-t410.dts @@ -77,7 +77,7 @@ DM814X_IOPAD(0x09dc, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[0] */ DM814X_IOPAD(0x09e0, PIN_INPUT | 0x1) /* SD2_CLK */ DM814X_IOPAD(0x09f4, PIN_INPUT_PULLUP | 0x2) /* SD2_CMD */ - DM814X_IOPAD(0x0920, PIN_INPUT | 40) /* SD2_SDCD */ + DM814X_IOPAD(0x0920, PIN_INPUT | 0x40) /* SD2_SDCD */ >; }; diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/dra7-evm-common.dtsi index 05a7b1a01bc3..33230c8b2951 100644 --- a/arch/arm/boot/dts/dra7-evm-common.dtsi +++ b/arch/arm/boot/dts/dra7-evm-common.dtsi @@ -260,3 +260,18 @@ &pcie1_rc { status = "okay"; }; + +&mmc4 { + bus-width = <4>; + cap-power-off-card; + keep-power-in-suspend; + non-removable; + #address-cells = <1>; + #size-cells = <0>; + wifi@2 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio5>; + interrupts = <7 IRQ_TYPE_EDGE_RISING>; + }; +}; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index f1425b0f3a54..0894593860d6 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -20,6 +20,16 @@ reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */ }; + evm_12v0: fixedregulator-evm_12v0 { + /* main supply */ + compatible = "regulator-fixed"; + regulator-name = "evm_12v0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + evm_1v8_sw: fixedregulator-evm_1v8 { compatible = "regulator-fixed"; regulator-name = "evm_1v8"; @@ -54,6 +64,48 @@ regulator-max-microvolt = <1800000>; }; + evm_3v3: fixedregulator-evm3v3 { + /* Output of Cntlr A of TPS43351-Q1 on dra7-evm */ + compatible = "regulator-fixed"; + regulator-name = "evm_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&evm_12v0>; + regulator-always-on; + regulator-boot-on; + }; + + evm_5v0: fixedregulator-evm_5v0 { + /* Output of Cntlr B of TPS43351-Q1 on dra7-evm */ + compatible = "regulator-fixed"; + regulator-name = "evm_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&evm_12v0>; + regulator-always-on; + regulator-boot-on; + }; + + evm_3v6: fixedregulator-evm_3v6 { + compatible = "regulator-fixed"; + regulator-name = "evm_3v6"; + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + vin-supply = <&evm_5v0>; + regulator-always-on; + regulator-boot-on; + }; + + vmmcwl_fixed: fixedregulator-mmcwl { + compatible = "regulator-fixed"; + regulator-name = "vmmcwl_fixed"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio5 8 0>; + startup-delay-us = <70000>; + enable-active-high; + }; + extcon_usb2: extcon_usb2 { compatible = "linux,extcon-usb-gpio"; id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>; @@ -325,6 +377,7 @@ vmmc-supply = <&evm_1v8_sw>; vqmmc-supply = <&evm_1v8_sw>; bus-width = <8>; + non-removable; pinctrl-names = "default", "hs", "ddr_1_8v-rev11", "ddr_1_8v", "hs200_1_8v-rev11", "hs200_1_8v"; pinctrl-0 = <&mmc2_pins_default>; pinctrl-1 = <&mmc2_pins_hs>; @@ -334,6 +387,21 @@ pinctrl-5 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>; }; +&mmc4 { + status = "okay"; + vmmc-supply = <&evm_3v6>; + vqmmc-supply = <&vmmcwl_fixed>; + pinctrl-names = "default-rev11", "default", "hs-rev11", "hs", "sdr12-rev11", "sdr12", "sdr25-rev11", "sdr25"; + pinctrl-0 = <&mmc4_pins_default &mmc4_iodelay_ds_rev11_conf>; + pinctrl-1 = <&mmc4_pins_default &mmc4_iodelay_ds_rev20_conf>; + pinctrl-2 = <&mmc4_pins_hs &mmc4_iodelay_sdr12_hs_sdr25_rev11_conf>; + pinctrl-3 = <&mmc4_pins_hs &mmc4_iodelay_sdr12_hs_sdr25_rev20_conf>; + pinctrl-4 = <&mmc4_pins_sdr12 &mmc4_iodelay_sdr12_hs_sdr25_rev11_conf>; + pinctrl-5 = <&mmc4_pins_sdr12 &mmc4_iodelay_sdr12_hs_sdr25_rev20_conf>; + pinctrl-6 = <&mmc4_pins_sdr25 &mmc4_iodelay_sdr12_hs_sdr25_rev11_conf>; + pinctrl-7 = <&mmc4_pins_sdr25 &mmc4_iodelay_sdr12_hs_sdr25_rev20_conf>; +}; + &cpu0 { vdd-supply = <&smps123_reg>; }; diff --git a/arch/arm/boot/dts/dra7-mmc-iodelay.dtsi b/arch/arm/boot/dts/dra7-mmc-iodelay.dtsi new file mode 100644 index 000000000000..aa0947266526 --- /dev/null +++ b/arch/arm/boot/dts/dra7-mmc-iodelay.dtsi @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * MMC IOdelay values for TI's DRA7xx SoCs. + * Copyright (C) 2018 Texas Instruments + * Author: Kishon Vijay Abraham I <kishon@ti.com> + */ + +&dra7_pmx_core { + mmc1_pins_default_no_clk_pu: mmc1_pins_default_no_clk_pu { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; +}; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index f4ddd86f2c77..9dcd14edc202 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -1079,17 +1079,15 @@ }; mmc1: mmc@4809c000 { - compatible = "ti,omap4-hsmmc"; + compatible = "ti,dra7-sdhci"; reg = <0x4809c000 0x400>; interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmc1"; - ti,dual-volt; - ti,needs-special-reset; - dmas = <&sdma_xbar 61>, <&sdma_xbar 62>; - dma-names = "tx", "rx"; status = "disabled"; pbias-supply = <&pbias_mmc_reg>; max-frequency = <192000000>; + mmc-ddr-1_8v; + mmc-ddr-3_3v; }; hdqw1w: 1w@480b2000 { @@ -1100,40 +1098,40 @@ }; mmc2: mmc@480b4000 { - compatible = "ti,omap4-hsmmc"; + compatible = "ti,dra7-sdhci"; reg = <0x480b4000 0x400>; interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmc2"; - ti,needs-special-reset; - dmas = <&sdma_xbar 47>, <&sdma_xbar 48>; - dma-names = "tx", "rx"; status = "disabled"; max-frequency = <192000000>; + /* SDR104/DDR50/SDR50 bits in CAPA2 is not supported */ + sdhci-caps-mask = <0x7 0x0>; + mmc-hs200-1_8v; + mmc-ddr-1_8v; + mmc-ddr-3_3v; }; mmc3: mmc@480ad000 { - compatible = "ti,omap4-hsmmc"; + compatible = "ti,dra7-sdhci"; reg = <0x480ad000 0x400>; interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmc3"; - ti,needs-special-reset; - dmas = <&sdma_xbar 77>, <&sdma_xbar 78>; - dma-names = "tx", "rx"; status = "disabled"; /* Errata i887 limits max-frequency of MMC3 to 64 MHz */ max-frequency = <64000000>; + /* SDMA is not supported */ + sdhci-caps-mask = <0x0 0x400000>; }; mmc4: mmc@480d1000 { - compatible = "ti,omap4-hsmmc"; + compatible = "ti,dra7-sdhci"; reg = <0x480d1000 0x400>; interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmc4"; - ti,needs-special-reset; - dmas = <&sdma_xbar 57>, <&sdma_xbar 58>; - dma-names = "tx", "rx"; status = "disabled"; max-frequency = <192000000>; + /* SDMA is not supported */ + sdhci-caps-mask = <0x0 0x400000>; }; mmu0_dsp1: mmu@40d01000 { diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts index ebc4bbae981e..b7aeaeeead3b 100644 --- a/arch/arm/boot/dts/dra71-evm.dts +++ b/arch/arm/boot/dts/dra71-evm.dts @@ -7,6 +7,7 @@ */ #include "dra72-evm-common.dtsi" +#include "dra7-mmc-iodelay.dtsi" #include "dra72x-mmc-iodelay.dtsi" #include <dt-bindings/net/ti-dp83867.h> @@ -50,19 +51,6 @@ }; }; -&dra7_pmx_core { - mmc1_pins_default: mmc1_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mmc1_clk.clk */ - DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ - DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ - DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ - DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ - DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ - >; - }; -}; - &i2c1 { status = "okay"; clock-frequency = <400000>; @@ -187,7 +175,7 @@ &mmc1 { pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104"; - pinctrl-0 = <&mmc1_pins_default>; + pinctrl-0 = <&mmc1_pins_default_no_clk_pu>; pinctrl-1 = <&mmc1_pins_hs>; pinctrl-2 = <&mmc1_pins_sdr12>; pinctrl-3 = <&mmc1_pins_sdr25>; @@ -204,6 +192,7 @@ pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>; pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>; vmmc-supply = <&evm_1v8_sw>; + vqmmc-supply = <&evm_1v8_sw>; }; &mac { diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi index e85f560a2f78..df174f5c15d1 100644 --- a/arch/arm/boot/dts/dra72-evm-common.dtsi +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi @@ -44,6 +44,16 @@ regulator-boot-on; }; + evm_3v6: fixedregulator-evm_3v6 { + compatible = "regulator-fixed"; + regulator-name = "evm_3v6"; + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + vin-supply = <&evm_5v0>; + regulator-always-on; + regulator-boot-on; + }; + vsys_3v3: fixedregulator-vsys3v3 { /* Output 2 of TPS43351QDAPRQ1 on dra72-evm */ /* Output 2 of LM5140QRWGTQ1 on dra71-evm */ @@ -171,36 +181,18 @@ clocks = <&atl_clkin2_ck>; }; }; -}; - -&dra7_pmx_core { - mmc1_pins_default: mmc1_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */ - DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ - DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ - DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ - DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ - DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ - DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ - >; - }; - mmc2_pins_default: mmc2_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ - DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ - DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ - DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ - DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ - DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ - DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ - DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ - DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ - DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ - >; + vmmcwl_fixed: fixedregulator-mmcwl { + compatible = "regulator-fixed"; + regulator-name = "vmmcwl_fixed"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio5 8 GPIO_ACTIVE_HIGH>; + enable-active-high; }; +}; +&dra7_pmx_core { dcan1_pins_default: dcan1_pins_default { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */ @@ -421,10 +413,33 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins_default>; bus-width = <8>; - ti,non-removable; + non-removable; max-frequency = <192000000>; }; +&mmc4 { + status = "okay"; + vmmc-supply = <&evm_3v6>; + vqmmc-supply = <&vmmcwl_fixed>; + bus-width = <4>; + cap-power-off-card; + keep-power-in-suspend; + non-removable; + pinctrl-names = "default", "hs", "sdr12", "sdr25"; + pinctrl-0 = <&mmc4_pins_default>; + pinctrl-1 = <&mmc4_pins_default>; + pinctrl-2 = <&mmc4_pins_default>; + pinctrl-3 = <&mmc4_pins_default>; + #address-cells = <1>; + #size-cells = <0>; + wifi@2 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio5>; + interrupts = <7 IRQ_TYPE_EDGE_RISING>; + }; +}; + &mac { status = "okay"; }; diff --git a/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi b/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi index 088013c6dc6e..edad87c4292c 100644 --- a/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi +++ b/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi @@ -202,6 +202,17 @@ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ >; }; + + mmc4_pins_default: mmc4_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.mmc4_clk */ + DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */ + DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */ + DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MUX_MODE3) /* uart2_txd.mmc4_dat1 */ + DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */ + DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */ + >; + }; }; &dra7_iodelay_core { diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts index 2deb96405d06..c07f0051844d 100644 --- a/arch/arm/boot/dts/dra76-evm.dts +++ b/arch/arm/boot/dts/dra76-evm.dts @@ -42,6 +42,16 @@ regulator-boot-on; }; + vio_3v6: fixedregulator-vio_3v6 { + compatible = "regulator-fixed"; + regulator-name = "vio_3v6"; + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + vin-supply = <&vsys_5v0>; + regulator-always-on; + regulator-boot-on; + }; + vsys_3v3: fixedregulator-vsys3v3 { /* Output of Cntlr A of TPS43351-Q1 on dra76-evm */ compatible = "regulator-fixed"; @@ -81,6 +91,16 @@ vin-supply = <&smps5_reg>; }; + vmmcwl_fixed: fixedregulator-mmcwl { + compatible = "regulator-fixed"; + regulator-name = "vmmcwl_fixed"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio5 8 0>; /* gpio5_8 */ + startup-delay-us = <70000>; + enable-active-high; + }; + vtt_fixed: fixedregulator-vtt { compatible = "regulator-fixed"; regulator-name = "vtt_fixed"; @@ -307,7 +327,7 @@ &mmc1 { status = "okay"; vmmc-supply = <&vio_3v3_sd>; - vmmc_aux-supply = <&ldo4_reg>; + vqmmc-supply = <&ldo4_reg>; bus-width = <4>; /* * SDCD signal is not being used here - using the fact that GPIO mode @@ -324,6 +344,7 @@ vmmc-supply = <&vio_1v8>; vqmmc-supply = <&vio_1v8>; bus-width = <8>; + non-removable; pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v"; pinctrl-0 = <&mmc2_pins_default>; pinctrl-1 = <&mmc2_pins_default>; @@ -331,6 +352,17 @@ pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_conf>; }; +&mmc4 { + status = "okay"; + vmmc-supply = <&vio_3v6>; + vqmmc-supply = <&vmmcwl_fixed>; + pinctrl-names = "default", "hs", "sdr12", "sdr25"; + pinctrl-0 = <&mmc4_pins_hs &mmc4_iodelay_default_conf>; + pinctrl-1 = <&mmc4_pins_hs &mmc4_iodelay_manual1_conf>; + pinctrl-2 = <&mmc4_pins_hs &mmc4_iodelay_manual1_conf>; + pinctrl-3 = <&mmc4_pins_hs &mmc4_iodelay_manual1_conf>; +}; + /* No RTC on this device */ &rtc { status = "disabled"; diff --git a/arch/arm/boot/dts/exynos-syscon-restart.dtsi b/arch/arm/boot/dts/exynos-syscon-restart.dtsi index 4b3dd0549a54..ecf416690a15 100644 --- a/arch/arm/boot/dts/exynos-syscon-restart.dtsi +++ b/arch/arm/boot/dts/exynos-syscon-restart.dtsi @@ -3,22 +3,18 @@ * Samsung's Exynos SoC syscon reboot/poweroff nodes common definition. */ -/ { - soc { - compatible = "simple-bus"; - - poweroff: syscon-poweroff { - compatible = "syscon-poweroff"; - regmap = <&pmu_system_controller>; - offset = <0x330C>; /* PS_HOLD_CONTROL */ - mask = <0x5200>; /* reset value */ - }; +&pmu_system_controller { + poweroff: syscon-poweroff { + compatible = "syscon-poweroff"; + regmap = <&pmu_system_controller>; + offset = <0x330C>; /* PS_HOLD_CONTROL */ + mask = <0x5200>; /* reset value */ + }; - reboot: syscon-reboot { - compatible = "syscon-reboot"; - regmap = <&pmu_system_controller>; - offset = <0x0400>; /* SWRESET */ - mask = <0x1>; - }; + reboot: syscon-reboot { + compatible = "syscon-reboot"; + regmap = <&pmu_system_controller>; + offset = <0x0400>; /* SWRESET */ + mask = <0x1>; }; }; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 2c3460781cc6..2a6b828c01b7 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -24,6 +24,10 @@ i2c7 = &i2c_max77836; }; + chosen { + stdout-path = &serial_1; + }; + memory@40000000 { device_type = "memory"; reg = <0x40000000 0x1ff00000>; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 0a5f989d963b..962af97c1883 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -15,7 +15,6 @@ */ #include "exynos4-cpu-thermal.dtsi" -#include "exynos-syscon-restart.dtsi" #include <dt-bindings/clock/exynos3250.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -919,3 +918,4 @@ }; #include "exynos3250-pinctrl.dtsi" +#include "exynos-syscon-restart.dtsi" diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 909a9f2bf5be..dfe41b698745 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -20,7 +20,6 @@ #include <dt-bindings/clock/exynos-audss-clk.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> -#include "exynos-syscon-restart.dtsi" / { interrupt-parent = <&gic>; @@ -1025,3 +1024,5 @@ }; }; }; + +#include "exynos-syscon-restart.dtsi" diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 9a310e841d5d..2ab99f9f3d0a 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -34,26 +34,17 @@ stdout-path = &serial_2; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - mmc_reg: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "VMEM_VDD_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + mmc_reg: voltage-regulator { + compatible = "regulator-fixed"; + regulator-name = "VMEM_VDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>; + enable-active-high; }; gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; up { label = "Up"; @@ -131,12 +122,23 @@ cpu0-supply = <&buck1_reg>; }; +&exynos_usbphy { + status = "okay"; +}; + &fimd { pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>; pinctrl-names = "default"; status = "okay"; }; +&hsotg { + vusb_d-supply = <&ldo3_reg>; + vusb_a-supply = <&ldo8_reg>; + dr_mode = "peripheral"; + status = "okay"; +}; + &i2c_0 { status = "okay"; samsung,i2c-sda-delay = <100>; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index eaeeb4f6b84a..6f1d76cb7951 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -259,8 +259,8 @@ reg = <0x48>; interrupt-parent = <&gpx0>; interrupts = <4 IRQ_TYPE_EDGE_FALLING>; - x-size = <720>; - y-size = <1280>; + touchscreen-size-x = <720>; + touchscreen-size-y = <1280>; avdd-supply = <&tsp_reg>; vdd-supply = <&tsp_reg>; }; diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi index ee8e1f445370..30eee5942eff 100644 --- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi +++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi @@ -15,24 +15,22 @@ i2c10 = &i2c_cm36651; }; - regulators { - lcd_vdd3_reg: voltage-regulator-2 { - compatible = "regulator-fixed"; - regulator-name = "LCD_VDD_2.2V"; - regulator-min-microvolt = <2200000>; - regulator-max-microvolt = <2200000>; - gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + lcd_vdd3_reg: voltage-regulator-6 { + compatible = "regulator-fixed"; + regulator-name = "LCD_VDD_2.2V"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - ps_als_reg: voltage-regulator-5 { - compatible = "regulator-fixed"; - regulator-name = "LED_A_3.0V"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + ps_als_reg: voltage-regulator-7 { + compatible = "regulator-fixed"; + regulator-name = "LED_A_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>; + enable-active-high; }; i2c_ak8975: i2c-gpio-0 { @@ -120,8 +118,8 @@ reg = <0x48>; interrupt-parent = <&gpm2>; interrupts = <3 IRQ_TYPE_EDGE_FALLING>; - x-size = <720>; - y-size = <1280>; + touchscreen-size-x = <720>; + touchscreen-size-y = <1280>; avdd-supply = <&ldo23_reg>; vdd-supply = <&ldo24_reg>; }; diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi index 76f2b30f1731..dc11ca1673e8 100644 --- a/arch/arm/boot/dts/exynos4412-midas.dtsi +++ b/arch/arm/boot/dts/exynos4412-midas.dtsi @@ -46,56 +46,50 @@ }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - cam_io_reg: voltage-regulator-1 { - compatible = "regulator-fixed"; - regulator-name = "CAM_SENSOR_A"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - enable-active-high; - status = "disabled"; - }; + cam_io_reg: voltage-regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "CAM_SENSOR_A"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + enable-active-high; + status = "disabled"; + }; - cam_af_reg: voltage-regulator-3 { - compatible = "regulator-fixed"; - regulator-name = "CAM_AF"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - enable-active-high; - status = "disabled"; - }; + cam_af_reg: voltage-regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "CAM_AF"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + enable-active-high; + status = "disabled"; + }; - vsil12: voltage-regulator-6 { - compatible = "regulator-fixed"; - regulator-name = "VSIL_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&buck7_reg>; - }; + vsil12: voltage-regulator-3 { + compatible = "regulator-fixed"; + regulator-name = "VSIL_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&buck7_reg>; + }; - vcc33mhl: voltage-regulator-7 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3.3_MHL"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + vcc33mhl: voltage-regulator-4 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3.3_MHL"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - vcc18mhl: voltage-regulator-8 { - compatible = "regulator-fixed"; - regulator-name = "VCC_1.8_MHL"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + vcc18mhl: voltage-regulator-5 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1.8_MHL"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; + enable-active-high; }; gpio-keys { diff --git a/arch/arm/boot/dts/exynos4412-n710x.dts b/arch/arm/boot/dts/exynos4412-n710x.dts index eb402a0d6651..fe2bfd76cc4e 100644 --- a/arch/arm/boot/dts/exynos4412-n710x.dts +++ b/arch/arm/boot/dts/exynos4412-n710x.dts @@ -13,15 +13,13 @@ /* bootargs are passed in by bootloader */ - regulators { - cam_vdda_reg: voltage-regulator-9 { - compatible = "regulator-fixed"; - regulator-name = "CAM_SENSOR_CORE_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - gpio = <&gpm4 1 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + cam_vdda_reg: voltage-regulator-6 { + compatible = "regulator-fixed"; + regulator-name = "CAM_SENSOR_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&gpm4 1 GPIO_ACTIVE_HIGH>; + enable-active-high; }; }; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index d7ad07fd48f9..a09e46c9dbc0 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -37,20 +37,14 @@ }; sound: sound { - compatible = "simple-audio-card"; + compatible = "hardkernel,odroid-xu4-audio"; - simple-audio-card,format = "i2s"; - simple-audio-card,bitclock-master = <&link0_codec>; - simple-audio-card,frame-master = <&link0_codec>; - - simple-audio-card,cpu { + cpu { sound-dai = <&i2s0 0>; - system-clock-frequency = <19200000>; }; - link0_codec: simple-audio-card,codec { - sound-dai = <&max98090>; - clocks = <&i2s0 CLK_I2S_CDCLK>; + codec { + sound-dai = <&hdmi>, <&max98090>; }; }; @@ -142,14 +136,25 @@ pinctrl-0 = <>; }; +&clock { + assigned-clocks = <&clock CLK_FOUT_EPLL>; + assigned-clock-rates = <45158401>; +}; + &clock_audss { assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, <&clock_audss EXYNOS_MOUT_I2S>, <&clock_audss EXYNOS_DOUT_SRP>, - <&clock_audss EXYNOS_DOUT_AUD_BUS>; + <&clock_audss EXYNOS_DOUT_AUD_BUS>, + <&clock_audss EXYNOS_DOUT_I2S>; + assigned-clock-parents = <&clock CLK_FOUT_EPLL>, - <&clock_audss EXYNOS_MOUT_AUDSS>; - assigned-clock-rates = <0>, <0>, <192000000>, <19200000>; + <&clock_audss EXYNOS_MOUT_AUDSS>; + + assigned-clock-rates = <0>, <0>, + <196608001>, + <(196608001 / 2)>, + <(196608001 / 8)>; }; &cpu0 { @@ -498,6 +503,8 @@ pinctrl-0 = <&i2s0_bus>; pinctrl-names = "default"; status = "okay"; + assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>; + assigned-clock-parents = <&clock_audss EXYNOS_SCLK_I2S>; }; &mixer { diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts index bdcd4523cc1c..459919b65df8 100644 --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts @@ -113,11 +113,11 @@ }; &sound { - simple-audio-card,name = "Odroid-U3"; - simple-audio-card,widgets = + model = "Odroid-U3"; + samsung,audio-widgets = "Headphone", "Headphone Jack", "Speakers", "Speakers"; - simple-audio-card,routing = + samsung,audio-routing = "Headphone Jack", "HPL", "Headphone Jack", "HPR", "Headphone Jack", "MICBIAS", diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts index 2dff129bc2ad..348556fcdd9d 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts @@ -97,12 +97,12 @@ }; &sound { - simple-audio-card,name = "Odroid-X"; - simple-audio-card,widgets = + model = "Odroid-X"; + samsung,audio-widgets = "Headphone", "Headphone Jack", "Microphone", "Mic Jack", "Microphone", "DMIC"; - simple-audio-card,routing = + samsung,audio-routing = "Headphone Jack", "HPL", "Headphone Jack", "HPR", "IN1", "Mic Jack", diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index 1514f0dbaff8..346f71932457 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -90,7 +90,7 @@ samsung,vbus-gpio = <&gpx3 5 1>; status = "okay"; - port@1{ + port@1 { status = "okay"; }; port@2 { diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 2ae1ab602f4b..7b43c10c510b 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -298,7 +298,7 @@ status = "disabled"; }; - sysmmu_g2d: sysmmu@10A40000{ + sysmmu_g2d: sysmmu@10a40000 { compatible = "samsung,exynos-sysmmu"; reg = <0x10A40000 0x1000>; interrupt-parent = <&combiner>; diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi index f8d7de1144f1..5d2f0a06fbef 100644 --- a/arch/arm/boot/dts/exynos5.dtsi +++ b/arch/arm/boot/dts/exynos5.dtsi @@ -12,7 +12,6 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> -#include "exynos-syscon-restart.dtsi" / { interrupt-parent = <&gic>; @@ -197,8 +196,6 @@ reg = <0x145B0000 0x1000>; interrupts = <10 3>; interrupt-parent = <&combiner>; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 45283a6c5eee..2daf505b3d08 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -132,10 +132,6 @@ reg = <0x100440A0 0x20>; #power-domain-cells = <0>; label = "DISP1"; - clocks = <&clock CLK_FIN_PLL>, - <&clock CLK_MOUT_ACLK200_DISP1_SUB>, - <&clock CLK_MOUT_ACLK300_DISP1_SUB>; - clock-names = "oscclk", "clk0", "clk1"; }; pd_mau: power-domain@100440c0 { @@ -882,7 +878,7 @@ #iommu-cells = <0>; }; - sysmmu_fimc_dis1: sysmmu@132E0000{ + sysmmu_fimc_dis1: sysmmu@132e0000 { compatible = "samsung,exynos-sysmmu"; reg = <0x132E0000 0x1000>; interrupt-parent = <&combiner>; @@ -1117,3 +1113,4 @@ }; #include "exynos5250-pinctrl.dtsi" +#include "exynos-syscon-restart.dtsi" diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi index 55509c690328..20e789ea136f 100644 --- a/arch/arm/boot/dts/exynos5410.dtsi +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -439,3 +439,4 @@ }; #include "exynos5410-pinctrl.dtsi" +#include "exynos-syscon-restart.dtsi" diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 244f0091c21f..57c2332bf282 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -29,7 +29,7 @@ aliases { /* Assign 20 so we don't get confused w/ builtin ones */ - i2c20 = "/spi@12d40000/cros-ec@0/i2c-tunnel"; + i2c20 = &i2c_tunnel; }; backlight: backlight { @@ -970,7 +970,7 @@ samsung,spi-feedback-delay = <1>; }; - i2c-tunnel { + i2c_tunnel: i2c-tunnel { compatible = "google,cros-ec-i2c-tunnel"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 2f3cb2a97f71..f4e8c5823bc2 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -276,10 +276,6 @@ reg = <0x10044000 0x20>; #power-domain-cells = <0>; label = "GSC"; - clocks = <&clock CLK_FIN_PLL>, - <&clock CLK_MOUT_USER_ACLK300_GSCL>, - <&clock CLK_GSCL0>, <&clock CLK_GSCL1>; - clock-names = "oscclk", "clk0", "asb0", "asb1"; }; isp_pd: power-domain@10044020 { @@ -292,10 +288,6 @@ mfc_pd: power-domain@10044060 { compatible = "samsung,exynos4210-pd"; reg = <0x10044060 0x20>; - clocks = <&clock CLK_FIN_PLL>, - <&clock CLK_MOUT_USER_ACLK333>, - <&clock CLK_ACLK333>; - clock-names = "oscclk", "clk0","asb0"; #power-domain-cells = <0>; label = "MFC"; }; @@ -312,12 +304,6 @@ reg = <0x100440C0 0x20>; #power-domain-cells = <0>; label = "DISP"; - clocks = <&clock CLK_FIN_PLL>, - <&clock CLK_MOUT_USER_ACLK200_DISP1>, - <&clock CLK_MOUT_USER_ACLK300_DISP1>, - <&clock CLK_MOUT_USER_ACLK400_DISP1>, - <&clock CLK_FIMD1>, <&clock CLK_MIXER>; - clock-names = "oscclk", "clk0", "clk1", "clk2", "asb0", "asb1"; }; mau_pd: power-domain@100440e0 { @@ -687,6 +673,36 @@ iommus = <&sysmmu_gscl1>; }; + scaler_0: scaler@12800000 { + compatible = "samsung,exynos5420-scaler"; + reg = <0x12800000 0x1294>; + interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_MSCL0>; + clock-names = "mscl"; + power-domains = <&msc_pd>; + iommus = <&sysmmu_scaler0r>, <&sysmmu_scaler0w>; + }; + + scaler_1: scaler@12810000 { + compatible = "samsung,exynos5420-scaler"; + reg = <0x12810000 0x1294>; + interrupts = <0 221 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_MSCL1>; + clock-names = "mscl"; + power-domains = <&msc_pd>; + iommus = <&sysmmu_scaler1r>, <&sysmmu_scaler1w>; + }; + + scaler_2: scaler@12820000 { + compatible = "samsung,exynos5420-scaler"; + reg = <0x12820000 0x1294>; + interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_MSCL2>; + clock-names = "mscl"; + power-domains = <&msc_pd>; + iommus = <&sysmmu_scaler2r>, <&sysmmu_scaler2w>; + }; + jpeg_0: jpeg@11f50000 { compatible = "samsung,exynos5420-jpeg"; reg = <0x11F50000 0x1000>; @@ -761,7 +777,7 @@ #include "exynos5420-tmu-sensor-conf.dtsi" }; - sysmmu_g2dr: sysmmu@0x10A60000 { + sysmmu_g2dr: sysmmu@10a60000 { compatible = "samsung,exynos-sysmmu"; reg = <0x10A60000 0x1000>; interrupt-parent = <&combiner>; @@ -771,7 +787,7 @@ #iommu-cells = <0>; }; - sysmmu_g2dw: sysmmu@0x10A70000 { + sysmmu_g2dw: sysmmu@10a70000 { compatible = "samsung,exynos-sysmmu"; reg = <0x10A70000 0x1000>; interrupt-parent = <&combiner>; @@ -781,7 +797,7 @@ #iommu-cells = <0>; }; - sysmmu_tv: sysmmu@0x14650000 { + sysmmu_tv: sysmmu@14650000 { compatible = "samsung,exynos-sysmmu"; reg = <0x14650000 0x1000>; interrupt-parent = <&combiner>; @@ -792,7 +808,7 @@ #iommu-cells = <0>; }; - sysmmu_gscl0: sysmmu@0x13E80000 { + sysmmu_gscl0: sysmmu@13e80000 { compatible = "samsung,exynos-sysmmu"; reg = <0x13E80000 0x1000>; interrupt-parent = <&combiner>; @@ -803,7 +819,7 @@ #iommu-cells = <0>; }; - sysmmu_gscl1: sysmmu@0x13E90000 { + sysmmu_gscl1: sysmmu@13e90000 { compatible = "samsung,exynos-sysmmu"; reg = <0x13E90000 0x1000>; interrupt-parent = <&combiner>; @@ -814,65 +830,71 @@ #iommu-cells = <0>; }; - sysmmu_scaler0r: sysmmu@0x12880000 { + sysmmu_scaler0r: sysmmu@12880000 { compatible = "samsung,exynos-sysmmu"; reg = <0x12880000 0x1000>; interrupt-parent = <&combiner>; interrupts = <22 4>; clock-names = "sysmmu", "master"; clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>; + power-domains = <&msc_pd>; #iommu-cells = <0>; }; - sysmmu_scaler1r: sysmmu@0x12890000 { + sysmmu_scaler1r: sysmmu@12890000 { compatible = "samsung,exynos-sysmmu"; reg = <0x12890000 0x1000>; interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; clock-names = "sysmmu", "master"; clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>; + power-domains = <&msc_pd>; #iommu-cells = <0>; }; - sysmmu_scaler2r: sysmmu@0x128A0000 { + sysmmu_scaler2r: sysmmu@128a0000 { compatible = "samsung,exynos-sysmmu"; reg = <0x128A0000 0x1000>; interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; clock-names = "sysmmu", "master"; clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>; + power-domains = <&msc_pd>; #iommu-cells = <0>; }; - sysmmu_scaler0w: sysmmu@0x128C0000 { + sysmmu_scaler0w: sysmmu@128c0000 { compatible = "samsung,exynos-sysmmu"; reg = <0x128C0000 0x1000>; interrupt-parent = <&combiner>; interrupts = <27 2>; clock-names = "sysmmu", "master"; clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>; + power-domains = <&msc_pd>; #iommu-cells = <0>; }; - sysmmu_scaler1w: sysmmu@0x128D0000 { + sysmmu_scaler1w: sysmmu@128d0000 { compatible = "samsung,exynos-sysmmu"; reg = <0x128D0000 0x1000>; interrupt-parent = <&combiner>; interrupts = <22 6>; clock-names = "sysmmu", "master"; clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>; + power-domains = <&msc_pd>; #iommu-cells = <0>; }; - sysmmu_scaler2w: sysmmu@0x128E0000 { + sysmmu_scaler2w: sysmmu@128e0000 { compatible = "samsung,exynos-sysmmu"; reg = <0x128E0000 0x1000>; interrupt-parent = <&combiner>; interrupts = <19 6>; clock-names = "sysmmu", "master"; clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>; + power-domains = <&msc_pd>; #iommu-cells = <0>; }; - sysmmu_rotator: sysmmu@0x11D40000 { + sysmmu_rotator: sysmmu@11d40000 { compatible = "samsung,exynos-sysmmu"; reg = <0x11D40000 0x1000>; interrupt-parent = <&combiner>; @@ -882,7 +904,7 @@ #iommu-cells = <0>; }; - sysmmu_jpeg0: sysmmu@0x11F10000 { + sysmmu_jpeg0: sysmmu@11f10000 { compatible = "samsung,exynos-sysmmu"; reg = <0x11F10000 0x1000>; interrupt-parent = <&combiner>; @@ -892,7 +914,7 @@ #iommu-cells = <0>; }; - sysmmu_jpeg1: sysmmu@0x11F20000 { + sysmmu_jpeg1: sysmmu@11f20000 { compatible = "samsung,exynos-sysmmu"; reg = <0x11F20000 0x1000>; interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; @@ -901,7 +923,7 @@ #iommu-cells = <0>; }; - sysmmu_mfc_l: sysmmu@0x11200000 { + sysmmu_mfc_l: sysmmu@11200000 { compatible = "samsung,exynos-sysmmu"; reg = <0x11200000 0x1000>; interrupt-parent = <&combiner>; @@ -912,7 +934,7 @@ #iommu-cells = <0>; }; - sysmmu_mfc_r: sysmmu@0x11210000 { + sysmmu_mfc_r: sysmmu@11210000 { compatible = "samsung,exynos-sysmmu"; reg = <0x11210000 0x1000>; interrupt-parent = <&combiner>; @@ -923,7 +945,7 @@ #iommu-cells = <0>; }; - sysmmu_fimd1_0: sysmmu@0x14640000 { + sysmmu_fimd1_0: sysmmu@14640000 { compatible = "samsung,exynos-sysmmu"; reg = <0x14640000 0x1000>; interrupt-parent = <&combiner>; @@ -934,7 +956,7 @@ #iommu-cells = <0>; }; - sysmmu_fimd1_1: sysmmu@0x14680000 { + sysmmu_fimd1_1: sysmmu@14680000 { compatible = "samsung,exynos-sysmmu"; reg = <0x14680000 0x1000>; interrupt-parent = <&combiner>; @@ -1531,3 +1553,4 @@ }; #include "exynos5420-pinctrl.dtsi" +#include "exynos-syscon-restart.dtsi" diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi index d31249f25ccf..2f4f40882dab 100644 --- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi @@ -23,7 +23,7 @@ stdout-path = "serial2:115200n8"; }; - firmware@02073000 { + firmware@2073000 { compatible = "samsung,secure-firmware"; reg = <0x02073000 0x1000>; }; diff --git a/arch/arm/boot/dts/exynos5440-sd5v1.dts b/arch/arm/boot/dts/exynos5440-sd5v1.dts deleted file mode 100644 index c4b8392d1ae1..000000000000 --- a/arch/arm/boot/dts/exynos5440-sd5v1.dts +++ /dev/null @@ -1,42 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * SAMSUNG SD5v1 board device tree source - * - * Copyright (c) 2013 Samsung Electronics Co., Ltd. - * http://www.samsung.com - */ - -/dts-v1/; -#include "exynos5440.dtsi" - -/ { - model = "SAMSUNG SD5v1 board based on EXYNOS5440"; - compatible = "samsung,sd5v1", "samsung,exynos5440", "samsung,exynos5"; - - chosen { - bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200"; - }; - - /* FIXME: set reg property with correct start address and size */ - memory@0 { - device_type = "memory"; - reg = <0 0>; - }; - - fixed-rate-clocks { - xtal { - compatible = "samsung,clock-xtal"; - clock-frequency = <50000000>; - }; - }; - - spi { - status = "disabled"; - }; - -}; - -&gmac { - fixed_phy; - phy_addr = <1>; -}; diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts deleted file mode 100644 index a33c4fc29ae5..000000000000 --- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts +++ /dev/null @@ -1,81 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * SAMSUNG SSDK5440 board device tree source - * - * Copyright (c) 2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - */ - -/dts-v1/; -#include "exynos5440.dtsi" -#include <dt-bindings/gpio/gpio.h> - -/ { - model = "SAMSUNG SSDK5440 board based on EXYNOS5440"; - compatible = "samsung,ssdk5440", "samsung,exynos5440", "samsung,exynos5"; - - chosen { - bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200"; - }; - - /* FIXME: set reg property with correct start address and size */ - memory@0 { - device_type = "memory"; - reg = <0 0>; - }; - - fixed-rate-clocks { - xtal { - compatible = "samsung,clock-xtal"; - clock-frequency = <50000000>; - }; - }; -}; - -&pcie_0 { - reset-gpio = <&pin_ctrl 5 GPIO_ACTIVE_HIGH>; - status = "okay"; -}; - -&pcie_1 { - reset-gpio = <&pin_ctrl 22 GPIO_ACTIVE_HIGH>; - status = "okay"; -}; - -&spi_0 { - flash: w25q128@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "winbond,w25q128"; - spi-max-frequency = <15625000>; - reg = <0>; - controller-data { - samsung,spi-feedback-delay = <0>; - }; - - partition@0 { - label = "BootLoader"; - reg = <0x60000 0x80000>; - read-only; - }; - - partition@e0000 { - label = "Recovery-Kernel"; - reg = <0xe0000 0x300000>; - read-only; - }; - - partition@3e0000 { - label = "CRAM-FS"; - reg = <0x3e0000 0x700000>; - read-only; - }; - - partition@ae0000 { - label = "User-Data"; - reg = <0xae0000 0x520000>; - }; - - }; - -}; diff --git a/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi deleted file mode 100644 index 0421c3d42905..000000000000 --- a/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi +++ /dev/null @@ -1,20 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device tree sources for Exynos5440 TMU sensor configuration - * - * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com> - */ - -#include <dt-bindings/thermal/thermal_exynos.h> - -#thermal-sensor-cells = <0>; -samsung,tmu_gain = <5>; -samsung,tmu_reference_voltage = <16>; -samsung,tmu_noise_cancel_mode = <4>; -samsung,tmu_efuse_value = <0x5d2d>; -samsung,tmu_min_efuse_value = <16>; -samsung,tmu_max_efuse_value = <76>; -samsung,tmu_first_point_trim = <25>; -samsung,tmu_second_point_trim = <70>; -samsung,tmu_default_temp_offset = <25>; -samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>; diff --git a/arch/arm/boot/dts/exynos5440-trip-points.dtsi b/arch/arm/boot/dts/exynos5440-trip-points.dtsi deleted file mode 100644 index a2b04fed7d0b..000000000000 --- a/arch/arm/boot/dts/exynos5440-trip-points.dtsi +++ /dev/null @@ -1,21 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device tree sources for default Exynos5440 thermal zone definition - * - * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com> - */ - -polling-delay-passive = <0>; -polling-delay = <0>; -trips { - cpu-alert-0 { - temperature = <100000>; /* millicelsius */ - hysteresis = <0>; /* millicelsius */ - type = "active"; - }; - cpu-crit-0 { - temperature = <105000>; /* millicelsius */ - hysteresis = <0>; /* millicelsius */ - type = "critical"; - }; -}; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi deleted file mode 100644 index f3abecc44657..000000000000 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ /dev/null @@ -1,355 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * SAMSUNG EXYNOS5440 SoC device tree source - * - * Copyright (c) 2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - */ - -#include <dt-bindings/clock/exynos5440.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/interrupt-controller/irq.h> - -/ { - compatible = "samsung,exynos5440", "samsung,exynos5"; - - interrupt-parent = <&gic>; - #address-cells = <1>; - #size-cells = <1>; - - aliases { - serial0 = &serial_0; - serial1 = &serial_1; - spi0 = &spi_0; - tmuctrl0 = &tmuctrl_0; - tmuctrl1 = &tmuctrl_1; - tmuctrl2 = &tmuctrl_2; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0>; - }; - cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <1>; - }; - cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <2>; - }; - cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <3>; - }; - }; - - soc: soc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - clock: clock-controller@160000 { - compatible = "samsung,exynos5440-clock"; - reg = <0x160000 0x1000>; - #clock-cells = <1>; - }; - - gic: interrupt-controller@2e0000 { - compatible = "arm,cortex-a15-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x2E1000 0x1000>, - <0x2E2000 0x2000>, - <0x2E4000 0x2000>, - <0x2E6000 0x2000>; - interrupts = <GIC_PPI 9 - (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; - }; - - - arm-pmu { - compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu"; - interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - }; - - timer { - compatible = "arm,cortex-a15-timer", - "arm,armv7-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; - clock-frequency = <50000000>; - }; - - cpufreq@160000 { - compatible = "samsung,exynos5440-cpufreq"; - reg = <0x160000 0x1000>; - interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; - operating-points = < - /* KHz uV */ - 1500000 1100000 - 1400000 1075000 - 1300000 1050000 - 1200000 1025000 - 1100000 1000000 - 1000000 975000 - 900000 950000 - 800000 925000 - >; - }; - - serial_0: serial@b0000 { - compatible = "samsung,exynos4210-uart"; - reg = <0xB0000 0x1000>; - interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_B_125>, <&clock CLK_B_125>; - clock-names = "uart", "clk_uart_baud0"; - }; - - serial_1: serial@c0000 { - compatible = "samsung,exynos4210-uart"; - reg = <0xC0000 0x1000>; - interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_B_125>, <&clock CLK_B_125>; - clock-names = "uart", "clk_uart_baud0"; - }; - - spi_0: spi@d0000 { - compatible = "samsung,exynos5440-spi"; - reg = <0xD0000 0x100>; - interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - samsung,spi-src-clk = <0>; - num-cs = <1>; - clocks = <&clock CLK_B_125>, <&clock CLK_SPI_BAUD>; - clock-names = "spi", "spi_busclk0"; - }; - - pin_ctrl: pinctrl@e0000 { - compatible = "samsung,exynos5440-pinctrl"; - reg = <0xE0000 0x1000>; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <2>; - #gpio-cells = <2>; - - fan: fan { - samsung,exynos5440-pin-function = <1>; - }; - - hdd_led0: hdd_led0 { - samsung,exynos5440-pin-function = <2>; - }; - - hdd_led1: hdd_led1 { - samsung,exynos5440-pin-function = <3>; - }; - - uart1: uart1 { - samsung,exynos5440-pin-function = <4>; - }; - }; - - i2c@f0000 { - compatible = "samsung,exynos5440-i2c"; - reg = <0xF0000 0x1000>; - interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_B_125>; - clock-names = "i2c"; - }; - - i2c@100000 { - compatible = "samsung,exynos5440-i2c"; - reg = <0x100000 0x1000>; - interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_B_125>; - clock-names = "i2c"; - }; - - watchdog@110000 { - compatible = "samsung,s3c6410-wdt"; - reg = <0x110000 0x1000>; - interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_B_125>; - clock-names = "watchdog"; - }; - - gmac: ethernet@230000 { - compatible = "snps,dwmac-3.70a", "snps,dwmac"; - reg = <0x00230000 0x8000>; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq"; - phy-mode = "sgmii"; - clocks = <&clock CLK_GMAC0>; - clock-names = "stmmaceth"; - }; - - amba { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - interrupt-parent = <&gic>; - ranges; - }; - - rtc@130000 { - compatible = "samsung,s3c6410-rtc"; - reg = <0x130000 0x1000>; - interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_B_125>; - clock-names = "rtc"; - }; - - tmuctrl_0: tmuctrl@160118 { - compatible = "samsung,exynos5440-tmu"; - reg = <0x160118 0x230>, <0x160368 0x10>; - interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_B_125>; - clock-names = "tmu_apbif"; - #include "exynos5440-tmu-sensor-conf.dtsi" - }; - - tmuctrl_1: tmuctrl@16011c { - compatible = "samsung,exynos5440-tmu"; - reg = <0x16011C 0x230>, <0x160368 0x10>; - interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_B_125>; - clock-names = "tmu_apbif"; - #include "exynos5440-tmu-sensor-conf.dtsi" - }; - - tmuctrl_2: tmuctrl@160120 { - compatible = "samsung,exynos5440-tmu"; - reg = <0x160120 0x230>, <0x160368 0x10>; - interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_B_125>; - clock-names = "tmu_apbif"; - #include "exynos5440-tmu-sensor-conf.dtsi" - }; - - sata@210000 { - compatible = "snps,exynos5440-ahci"; - reg = <0x210000 0x10000>; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_SATA>; - clock-names = "sata"; - }; - - ohci@220000 { - compatible = "samsung,exynos5440-ohci"; - reg = <0x220000 0x1000>; - interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_USB>; - clock-names = "usbhost"; - }; - - ehci@221000 { - compatible = "samsung,exynos5440-ehci"; - reg = <0x221000 0x1000>; - interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_USB>; - clock-names = "usbhost"; - }; - - pcie_phy0: pcie-phy@270000 { - #phy-cells = <0>; - compatible = "samsung,exynos5440-pcie-phy"; - reg = <0x270000 0x1000>, <0x271000 0x40>; - }; - - pcie_phy1: pcie-phy@272000 { - #phy-cells = <0>; - compatible = "samsung,exynos5440-pcie-phy"; - reg = <0x272000 0x1000>, <0x271040 0x40>; - }; - - pcie_0: pcie@290000 { - compatible = "samsung,exynos5440-pcie", "snps,dw-pcie"; - reg = <0x290000 0x1000>, <0x40000000 0x1000>; - reg-names = "elbi", "config"; - interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_PR0_250_O>, <&clock CLK_PB0_250_O>; - clock-names = "pcie", "pcie_bus"; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - phys = <&pcie_phy0>; - ranges = <0x81000000 0 0 0x40001000 0 0x00010000 /* downstream I/O */ - 0x82000000 0 0x40011000 0x40011000 0 0x1ffef000>; /* non-prefetchable memory */ - bus-range = <0x00 0xff>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0x0 0 &gic 53>; - num-lanes = <4>; - status = "disabled"; - }; - - pcie_1: pcie@2a0000 { - compatible = "samsung,exynos5440-pcie", "snps,dw-pcie"; - reg = <0x2a0000 0x1000>, <0x60000000 0x1000>; - reg-names = "elbi", "config"; - interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_PR1_250_O>, <&clock CLK_PB0_250_O>; - clock-names = "pcie", "pcie_bus"; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - phys = <&pcie_phy1>; - ranges = <0x81000000 0 0 0x60001000 0 0x00010000 /* downstream I/O */ - 0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>; /* non-prefetchable memory */ - bus-range = <0x00 0xff>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0x0 0 &gic 56>; - num-lanes = <4>; - status = "disabled"; - }; - }; - - thermal-zones { - cpu0_thermal: cpu0-thermal { - thermal-sensors = <&tmuctrl_0>; - #include "exynos5440-trip-points.dtsi" - }; - cpu1_thermal: cpu1-thermal { - thermal-sensors = <&tmuctrl_1>; - #include "exynos5440-trip-points.dtsi" - }; - cpu2_thermal: cpu2-thermal { - thermal-sensors = <&tmuctrl_2>; - #include "exynos5440-trip-points.dtsi" - }; - }; -}; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 2f8df9244f72..d80ab9085da1 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -27,7 +27,7 @@ aliases { /* Assign 20 so we don't get confused w/ builtin ones */ - i2c20 = "/spi@12d40000/cros-ec@0/i2c-tunnel"; + i2c20 = &i2c_tunnel; }; backlight: backlight { @@ -939,7 +939,7 @@ samsung,spi-feedback-delay = <1>; }; - i2c-tunnel { + i2c_tunnel: i2c-tunnel { compatible = "google,cros-ec-i2c-tunnel"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts index cadde92bc6b5..fb5c954ab95a 100644 --- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts +++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts @@ -13,22 +13,22 @@ #address-cells = <1>; #size-cells = <1>; - memory { + memory@0 { /* 128 MB SDRAM in 2 x Hynix HY5DU121622DTP-D43 */ device_type = "memory"; reg = <0x00000000 0x8000000>; }; chosen { - stdout-path = "uart0:115200n8"; + bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait"; + stdout-path = "uart0:19200n8"; }; gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; + button-esc { - debounce_interval = <50>; + debounce-interval = <50>; wakeup-source; linux,code = <KEY_ESC>; label = "reset"; @@ -36,7 +36,7 @@ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; }; button-eject { - debounce_interval = <50>; + debounce-interval = <50>; wakeup-source; linux,code = <KEY_EJECTCD>; label = "unmount"; @@ -98,7 +98,7 @@ /* * These two LEDs are on the side of the device. * For electrical reasons, both LEDs cannot be active - * at the same time so only blue or orange can on at + * at the same time so only blue or orange can be on at * one time. Enabling both makes the LED go dark. * The LEDs both sit inside the unmount button and the * label on the case says "unmount". @@ -108,12 +108,14 @@ /* Collides with LPC_SERIRQ, UART DTR, SSP FSC pins */ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; default-state = "off"; + linux,default-trigger = "disk-read"; }; led-orange-hd { label = "dir685:orange:HD"; /* Collides with LPC_LAD[2], UART DSR, SSP ECLK pins */ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; default-state = "off"; + linux,default-trigger = "disk-write"; }; }; diff --git a/arch/arm/boot/dts/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini-dlink-dns-313.dts index 403364a7aab9..d1329322b968 100644 --- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts +++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts @@ -15,7 +15,7 @@ #address-cells = <1>; #size-cells = <1>; - memory { + memory@0 { /* 64 MB SDRAM in a Nanya NT5DS32M16BS-6K package */ device_type = "memory"; reg = <0x00000000 0x4000000>; @@ -26,15 +26,15 @@ }; chosen { + bootargs = "console=ttyS0,19200n8 root=/dev/sda4 rw rootwait"; stdout-path = "uart0:19200n8"; }; gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; + button-esc { - debounce_interval = <50>; + debounce-interval = <50>; wakeup-source; linux,code = <KEY_ESC>; label = "reset"; @@ -59,14 +59,13 @@ label = "dns313:green:disk"; gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; default-state = "off"; - linux,default-trigger = "ide-disk"; - /* Ideally should activate while reading */ + linux,default-trigger = "disk-read"; }; led-disk-red { label = "dns313:red:disk"; gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; default-state = "off"; - /* Ideally should activate while writing */ + linux,default-trigger = "disk-write"; }; }; @@ -158,8 +157,12 @@ soc { flash@30000000 { + /* + * This is a Eon EN29LV400AB 512 KiB flash with + * three partitions. + */ + compatible = "cortina,gemini-flash", "jedec-flash"; status = "okay"; - /* 512KB of flash */ reg = <0x30000000 0x00080000>; /* diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini-nas4220b.dts index 4785fbcc41ed..963ea890c87f 100644 --- a/arch/arm/boot/dts/gemini-nas4220b.dts +++ b/arch/arm/boot/dts/gemini-nas4220b.dts @@ -14,7 +14,7 @@ #address-cells = <1>; #size-cells = <1>; - memory { /* 128 MB */ + memory@0 { /* 128 MB */ device_type = "memory"; reg = <0x00000000 0x8000000>; }; @@ -26,19 +26,17 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@29 { - debounce_interval = <50>; + button-setup { + debounce-interval = <50>; wakeup-source; linux,code = <KEY_SETUP>; label = "Backup button"; /* Conflict with TVC */ gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; }; - button@31 { - debounce_interval = <50>; + button-restart { + debounce-interval = <50>; wakeup-source; linux,code = <KEY_RESTART>; label = "Softreset button"; @@ -49,13 +47,13 @@ leds { compatible = "gpio-leds"; - led@28 { + led-orange-hdd { label = "nas4220b:orange:hdd"; /* Conflict with TVC */ gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - led@30 { + led-green-os { label = "nas4220b:green:os"; /* Conflict with TVC */ gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; @@ -202,5 +200,9 @@ ata@63000000 { status = "okay"; }; + + ata@63400000 { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/gemini-rut1xx.dts b/arch/arm/boot/dts/gemini-rut1xx.dts index 15f20178642c..eb4f0bf074da 100644 --- a/arch/arm/boot/dts/gemini-rut1xx.dts +++ b/arch/arm/boot/dts/gemini-rut1xx.dts @@ -14,7 +14,7 @@ #address-cells = <1>; #size-cells = <1>; - memory { /* 128 MB */ + memory@0 { /* 128 MB */ device_type = "memory"; reg = <0x00000000 0x8000000>; }; @@ -26,11 +26,9 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@28 { - debounce_interval = <50>; + button-setup { + debounce-interval = <50>; wakeup-source; linux,code = <KEY_SETUP>; label = "Reset to defaults"; @@ -41,14 +39,14 @@ leds { compatible = "gpio-leds"; - led@7 { + led-gsm { /* FIXME: add the LED color */ label = "rut1xx::gsm"; /* Conflict with ICE */ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - led@31 { + led-power { /* FIXME: add the LED color */ label = "rut1xx::power"; /* Conflict with NAND CE0 */ diff --git a/arch/arm/boot/dts/gemini-sq201.dts b/arch/arm/boot/dts/gemini-sq201.dts index 63c02ca9513c..e5cf9d1a98cd 100644 --- a/arch/arm/boot/dts/gemini-sq201.dts +++ b/arch/arm/boot/dts/gemini-sq201.dts @@ -14,7 +14,7 @@ #address-cells = <1>; #size-cells = <1>; - memory { /* 128 MB */ + memory@0 { /* 128 MB */ device_type = "memory"; reg = <0x00000000 0x8000000>; }; @@ -26,11 +26,9 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@18 { - debounce_interval = <50>; + button-setup { + debounce-interval = <50>; wakeup-source; linux,code = <KEY_SETUP>; label = "factory reset"; @@ -41,14 +39,14 @@ leds { compatible = "gpio-leds"; - led@20 { + led-green-info { label = "sq201:green:info"; /* Conflict with parallel flash */ gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; default-state = "on"; linux,default-trigger = "heartbeat"; }; - led@31 { + led-green-usb { label = "sq201:green:usb"; /* Conflict with parallel and NAND flash */ gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/gemini-wbd111.dts b/arch/arm/boot/dts/gemini-wbd111.dts index b4ec9ad85d72..29af86cd10f7 100644 --- a/arch/arm/boot/dts/gemini-wbd111.dts +++ b/arch/arm/boot/dts/gemini-wbd111.dts @@ -14,7 +14,8 @@ #address-cells = <1>; #size-cells = <1>; - memory { /* 128 MB */ + memory@0 { + /* 128 MB */ device_type = "memory"; reg = <0x00000000 0x8000000>; }; @@ -26,11 +27,9 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@5 { - debounce_interval = <50>; + button-setup { + debounce-interval = <50>; wakeup-source; linux,code = <KEY_SETUP>; label = "reset"; @@ -42,25 +41,25 @@ leds { compatible = "gpio-leds"; - led@1 { + led-red-l3 { label = "wbd111:red:L3"; /* Conflict with TVC and extended parallel flash */ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@2 { + led-green-l4 { label = "wbd111:green:L4"; /* Conflict with TVC and extended parallel flash */ gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@3 { + led-red-l4 { label = "wbd111:red:L4"; /* Conflict with TVC and extended parallel flash */ gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@5 { + led-greeb-l3 { label = "wbd111:green:L3"; /* Conflict with TVC and extended parallel flash */ gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/gemini-wbd222.dts b/arch/arm/boot/dts/gemini-wbd222.dts index 6d25bcc046e7..24e6ae3616f7 100644 --- a/arch/arm/boot/dts/gemini-wbd222.dts +++ b/arch/arm/boot/dts/gemini-wbd222.dts @@ -14,7 +14,7 @@ #address-cells = <1>; #size-cells = <1>; - memory { /* 128 MB */ + memory@0 { /* 128 MB */ device_type = "memory"; reg = <0x00000000 0x8000000>; }; @@ -26,11 +26,9 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@5 { - debounce_interval = <50>; + button-setup { + debounce-interval = <50>; wakeup-source; linux,code = <KEY_SETUP>; label = "reset"; @@ -42,25 +40,25 @@ leds { compatible = "gpio-leds"; - led@1 { + led-red-l3 { label = "wbd111:red:L3"; /* Conflict with TVC and extended parallel flash */ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@2 { + led-green-l4 { label = "wbd111:green:L4"; /* Conflict with TVC and extended parallel flash */ gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@3 { + led-red-l4 { label = "wbd111:red:L4"; /* Conflict with TVC and extended parallel flash */ gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@5 { + led-green-l3 { label = "wbd111:green:L3"; /* Conflict with TVC and extended parallel flash */ gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi index 0568baca500a..eb752e9495de 100644 --- a/arch/arm/boot/dts/gemini.dtsi +++ b/arch/arm/boot/dts/gemini.dtsi @@ -3,8 +3,6 @@ * Device Tree file for Cortina systems Gemini SoC */ -/include/ "skeleton.dtsi" - #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/clock/cortina,gemini-clock.h> #include <dt-bindings/reset/cortina,gemini-reset.h> diff --git a/arch/arm/boot/dts/imx1-ads.dts b/arch/arm/boot/dts/imx1-ads.dts index 6354e4c87313..a1d81badb5c8 100644 --- a/arch/arm/boot/dts/imx1-ads.dts +++ b/arch/arm/boot/dts/imx1-ads.dts @@ -23,17 +23,6 @@ memory@8000000 { reg = <0x08000000 0x04000000>; }; - - clocks { - #address-cells = <1>; - #size-cells = <0>; - - clk32 { - compatible = "fsl,imx-clk32", "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32000>; - }; - }; }; &cspi1 { diff --git a/arch/arm/boot/dts/imx1.dtsi b/arch/arm/boot/dts/imx1.dtsi index f7b9edf93f5e..3edc7b5550d8 100644 --- a/arch/arm/boot/dts/imx1.dtsi +++ b/arch/arm/boot/dts/imx1.dtsi @@ -1,13 +1,6 @@ -/* - * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> #include "imx1-pinfunc.h" @@ -62,6 +55,14 @@ }; }; + clocks { + clk32 { + compatible = "fsl,imx-clk32", "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32000>; + }; + }; + soc { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts index 9d92ece82560..9fb47724b9c1 100644 --- a/arch/arm/boot/dts/imx23-evk.dts +++ b/arch/arm/boot/dts/imx23-evk.dts @@ -1,13 +1,6 @@ -/* - * Copyright 2012 Freescale Semiconductor, Inc. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright 2012 Freescale Semiconductor, Inc. /dts-v1/; #include "imx23.dtsi" diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index cb0a3fe32718..71bfd2b15609 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -1,13 +1,6 @@ -/* - * Copyright 2012 Freescale Semiconductor, Inc. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright 2012 Freescale Semiconductor, Inc. #include "imx23-pinfunc.h" diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts index 7f9bd052b84e..a5626b46ac4e 100644 --- a/arch/arm/boot/dts/imx25-pdk.dts +++ b/arch/arm/boot/dts/imx25-pdk.dts @@ -1,13 +1,6 @@ -/* - * Copyright 2013 Freescale Semiconductor, Inc. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright 2013 Freescale Semiconductor, Inc. /dts-v1/; #include <dt-bindings/gpio/gpio.h> @@ -291,7 +284,6 @@ }; &ssi1 { - codec-handle = <&codec>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index cf70df20b19c..85c15ee63272 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -1,13 +1,6 @@ -/* - * Copyright 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> #include <dt-bindings/gpio/gpio.h> #include "imx25-pinfunc.h" @@ -70,9 +63,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <0>; - osc { compatible = "fsl,imx-osc", "fixed-clock"; #clock-cells = <0>; diff --git a/arch/arm/boot/dts/imx27-apf27.dts b/arch/arm/boot/dts/imx27-apf27.dts index 66941cdbf244..3eddd805a793 100644 --- a/arch/arm/boot/dts/imx27-apf27.dts +++ b/arch/arm/boot/dts/imx27-apf27.dts @@ -22,17 +22,10 @@ memory@a0000000 { reg = <0xa0000000 0x04000000>; }; +}; - clocks { - #address-cells = <1>; - #size-cells = <0>; - - osc26m { - compatible = "fsl,imx-osc26m", "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - }; +&clk_osc26m { + clock-frequency = <0>; }; &iomuxc { diff --git a/arch/arm/boot/dts/imx27-pdk.dts b/arch/arm/boot/dts/imx27-pdk.dts index 924b90c9985d..f9a882d99132 100644 --- a/arch/arm/boot/dts/imx27-pdk.dts +++ b/arch/arm/boot/dts/imx27-pdk.dts @@ -1,13 +1,6 @@ -/* - * Copyright 2012 Sascha Hauer, Pengutronix - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright 2012 Sascha Hauer, Pengutronix /dts-v1/; #include "imx27.dtsi" diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 6585b00c3917..753d88df1627 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -1,13 +1,6 @@ -/* - * Copyright 2012 Sascha Hauer, Pengutronix - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright 2012 Sascha Hauer, Pengutronix #include "imx27-pinfunc.h" @@ -57,10 +50,7 @@ }; clocks { - #address-cells = <1>; - #size-cells = <0>; - - osc26m { + clk_osc26m: osc26m { compatible = "fsl,imx-osc26m", "fixed-clock"; #clock-cells = <0>; clock-frequency = <26000000>; diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index 60e5c7fd5035..f1c8315b3e01 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -398,8 +398,6 @@ compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&rotary_btn_pins_cfa10049>; - #address-cells = <1>; - #size-cells = <0>; rotary_button { label = "rotary_button"; diff --git a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts index 7f8d40a9c67e..22215337f72a 100644 --- a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts +++ b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts @@ -206,8 +206,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&enocean_button>; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index b0d39654aeb3..6b0ae667640f 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -1,13 +1,6 @@ -/* - * Copyright 2012 Freescale Semiconductor, Inc. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright 2012 Freescale Semiconductor, Inc. /dts-v1/; #include "imx28.dtsi" diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts index 687186358c18..b8f46432e2a2 100644 --- a/arch/arm/boot/dts/imx28-tx28.dts +++ b/arch/arm/boot/dts/imx28-tx28.dts @@ -140,15 +140,10 @@ regulator-boot-on; }; - clocks { - #address-cells = <1>; - #size-cells = <0>; - mclk: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <26000000>; - }; + mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; }; sound { @@ -345,6 +340,7 @@ interrupts = <5 IRQ_TYPE_EDGE_FALLING>; reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>; + wakeup-source; }; touchscreen: tsc2007@48 { diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 9ad8d3556859..5107fdc482ea 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -1,13 +1,6 @@ -/* - * Copyright 2012 Freescale Semiconductor, Inc. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright 2012 Freescale Semiconductor, Inc. #include <dt-bindings/gpio/gpio.h> #include "imx28-pinfunc.h" diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi index ebc3f2dbb6fd..4642c8169a65 100644 --- a/arch/arm/boot/dts/imx31.dtsi +++ b/arch/arm/boot/dts/imx31.dtsi @@ -1,13 +1,6 @@ -/* - * Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> / { #address-cells = <1>; diff --git a/arch/arm/boot/dts/imx35-pdk.dts b/arch/arm/boot/dts/imx35-pdk.dts index 646b1257bba2..df613e88fd2c 100644 --- a/arch/arm/boot/dts/imx35-pdk.dts +++ b/arch/arm/boot/dts/imx35-pdk.dts @@ -1,14 +1,7 @@ -/* - * Copyright 2013 Eukréa Electromatique <denis@eukrea.com> - * Copyright 2014 Freescale Semiconductor, Inc. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright 2013 Eukréa Electromatique <denis@eukrea.com> +// Copyright 2014 Freescale Semiconductor, Inc. /dts-v1/; #include "imx35.dtsi" diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index 54111ed218b1..1c50b785cad4 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -1,12 +1,8 @@ -/* - * Copyright 2012 Steffen Trumtrar, Pengutronix - * - * based on imx27.dtsi - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2012 Steffen Trumtrar, Pengutronix +// +// based on imx27.dtsi #include "imx35-pinfunc.h" diff --git a/arch/arm/boot/dts/imx50-evk.dts b/arch/arm/boot/dts/imx50-evk.dts index 23f1833e23fa..f0622ec4ba9c 100644 --- a/arch/arm/boot/dts/imx50-evk.dts +++ b/arch/arm/boot/dts/imx50-evk.dts @@ -1,15 +1,8 @@ -/* - * Copyright 2013 Greg Ungerer <gerg@uclinux.org> - * Copyright 2011 Freescale Semiconductor, Inc. - * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright 2013 Greg Ungerer <gerg@uclinux.org> +// Copyright 2011 Freescale Semiconductor, Inc. +// Copyright 2011 Linaro Ltd. /dts-v1/; #include "imx50.dtsi" diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index 7954e79d0a16..a9b712db9f6c 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -60,9 +60,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <0>; - ckil { compatible = "fsl,imx-ckil", "fixed-clock"; #clock-cells = <0>; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index cf7a1963df25..b8ca73d3d379 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -1,14 +1,7 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. - * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright 2011 Freescale Semiconductor, Inc. +// Copyright 2011 Linaro Ltd. /dts-v1/; #include "imx51.dtsi" diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts index 6464f2560e06..df9eca94d812 100644 --- a/arch/arm/boot/dts/imx51-zii-rdu1.dts +++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts @@ -207,8 +207,6 @@ switch@0 { compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; reg = <0>; dsa,member = <0 0>; @@ -462,7 +460,10 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; bus-width = <4>; + no-1-8-v; non-removable; + no-sdio; + no-sd; status = "okay"; }; @@ -591,6 +592,7 @@ phy_type = "ulpi"; fsl,usbphy = <&usbh1phy>; disable-over-current; + maximum-speed = "full-speed"; vbus-supply = <®_5p0v_main>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 5d390a64e976..fe01b890c715 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -1,14 +1,7 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. - * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright 2011 Freescale Semiconductor, Inc. +// Copyright 2011 Linaro Ltd. #include "imx51-pinfunc.h" #include <dt-bindings/clock/imx5-clock.h> @@ -56,9 +49,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <0>; - ckil { compatible = "fsl,imx-ckil", "fixed-clock"; #clock-cells = <0>; diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts index 80fc00705d92..117bd002dd1d 100644 --- a/arch/arm/boot/dts/imx53-ard.dts +++ b/arch/arm/boot/dts/imx53-ard.dts @@ -11,6 +11,7 @@ */ /dts-v1/; +#include <dt-bindings/input/input.h> #include "imx53.dtsi" / { @@ -68,34 +69,34 @@ home { label = "Home"; gpios = <&gpio5 10 0>; - linux,code = <102>; /* KEY_HOME */ + linux,code = <KEY_HOME>; wakeup-source; }; back { label = "Back"; gpios = <&gpio5 11 0>; - linux,code = <158>; /* KEY_BACK */ + linux,code = <KEY_BACK>; wakeup-source; }; program { label = "Program"; gpios = <&gpio5 12 0>; - linux,code = <362>; /* KEY_PROGRAM */ + linux,code = <KEY_PROGRAM >; wakeup-source; }; volume-up { label = "Volume Up"; gpios = <&gpio5 13 0>; - linux,code = <115>; /* KEY_VOLUMEUP */ + linux,code = <KEY_VOLUMEUP>; }; volume-down { label = "Volume Down"; gpios = <&gpio4 0 0>; - linux,code = <114>; /* KEY_VOLUMEDOWN */ + linux,code = <KEY_VOLUMEDOWN>; }; }; }; diff --git a/arch/arm/boot/dts/imx53-m53.dtsi b/arch/arm/boot/dts/imx53-m53.dtsi index 3da6dd5edb79..ce45f08e3051 100644 --- a/arch/arm/boot/dts/imx53-m53.dtsi +++ b/arch/arm/boot/dts/imx53-m53.dtsi @@ -53,8 +53,6 @@ stmpe610@41 { compatible = "st,stmpe610"; - #address-cells = <1>; - #size-cells = <0>; reg = <0x41>; id = <0>; blocks = <0x5>; diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts index d5628af2e301..3aa6f693fa9f 100644 --- a/arch/arm/boot/dts/imx53-ppd.dts +++ b/arch/arm/boot/dts/imx53-ppd.dts @@ -180,8 +180,6 @@ power-gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; power-button { label = "Power button"; @@ -192,8 +190,6 @@ touch-lock-key { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; touch-lock-button { label = "Touch lock button"; @@ -300,7 +296,7 @@ compatible = "dlg,da9053-aa"; reg = <0>; interrupt-parent = <&gpio3>; - interrupts = <12 0x8>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; spi-max-frequency = <1000000>; dlg,tsi-as-adc; tsiref-supply = <®_tsiref>; @@ -473,7 +469,7 @@ compatible = "fsl,mma8453"; reg = <0x1c>; interrupt-parent = <&gpio1>; - interrupts = <6 0>; + interrupts = <6 IRQ_TYPE_NONE>; interrupt-names = "INT1"; }; @@ -539,7 +535,7 @@ reset-gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>; reg = <0x4b>; interrupt-parent = <&gpio5>; - interrupts = <4 0x8>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; }; }; @@ -559,8 +555,6 @@ status = "okay"; port@2 { - reg = <2>; - lvds0_out: endpoint { remote-endpoint = <&panel_in_lvds0>; }; diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index 485a69d45e1c..ef7658a78836 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -1,14 +1,7 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. - * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright 2011 Freescale Semiconductor, Inc. +// Copyright 2011 Linaro Ltd. #include "imx53.dtsi" diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts index d3d662e37677..6831836bd726 100644 --- a/arch/arm/boot/dts/imx53-qsb.dts +++ b/arch/arm/boot/dts/imx53-qsb.dts @@ -1,14 +1,7 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. - * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright 2011 Freescale Semiconductor, Inc. +// Copyright 2011 Linaro Ltd. /dts-v1/; #include "imx53-qsb-common.dtsi" @@ -23,7 +16,7 @@ compatible = "dlg,da9053-aa", "dlg,da9052"; reg = <0x48>; interrupt-parent = <&gpio7>; - interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */ + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* low-level active IRQ at GPIO7_11 */ regulators { buck1_reg: buck1 { diff --git a/arch/arm/boot/dts/imx53-qsrb.dts b/arch/arm/boot/dts/imx53-qsrb.dts index 4e103a905dc9..1bbf24ad308a 100644 --- a/arch/arm/boot/dts/imx53-qsrb.dts +++ b/arch/arm/boot/dts/imx53-qsrb.dts @@ -1,14 +1,7 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. - * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright 2011 Freescale Semiconductor, Inc. +// Copyright 2011 Linaro Ltd. /dts-v1/; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index fd030128666c..462071c9ddd7 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -1,16 +1,10 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. - * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright 2011 Freescale Semiconductor, Inc. +// Copyright 2011 Linaro Ltd. /dts-v1/; +#include <dt-bindings/input/input.h> #include "imx53.dtsi" / { @@ -27,13 +21,13 @@ volume-up { label = "Volume Up"; gpios = <&gpio2 14 0>; - linux,code = <115>; /* KEY_VOLUMEUP */ + linux,code = <KEY_VOLUMEUP>; }; volume-down { label = "Volume Down"; gpios = <&gpio2 15 0>; - linux,code = <114>; /* KEY_VOLUMEDOWN */ + linux,code = <KEY_VOLUMEDOWN>; }; }; }; diff --git a/arch/arm/boot/dts/imx53-tx53-x03x.dts b/arch/arm/boot/dts/imx53-tx53-x03x.dts index af8ec5e4417b..a7f77527269d 100644 --- a/arch/arm/boot/dts/imx53-tx53-x03x.dts +++ b/arch/arm/boot/dts/imx53-tx53-x03x.dts @@ -245,6 +245,7 @@ interrupts = <15 IRQ_TYPE_EDGE_FALLING>; reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; + wakeup-source; }; touchscreen: tsc2007@48 { diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi index 69a2af7d6c11..54cf3e67069a 100644 --- a/arch/arm/boot/dts/imx53-tx53.dtsi +++ b/arch/arm/boot/dts/imx53-tx53.dtsi @@ -58,7 +58,7 @@ can0 = &can2; /* Make the can interface indices consistent with TX28/TX48 modules */ can1 = &can1; ipu = &ipu; - reg_can_xcvr = ®_can_xcvr; + reg-can-xcvr = ®_can_xcvr; usbh1 = &usbh1; usbotg = &usbotg; }; @@ -67,13 +67,12 @@ ckih1 { clock-frequency = <0>; }; + }; - mclk: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <26000000>; - }; + mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; }; gpio-keys { @@ -550,7 +549,6 @@ }; &ssi1 { - codec-handle = <&sgtl5000>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi index df8dafe2564d..f83a8c62ea53 100644 --- a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi +++ b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi @@ -150,7 +150,7 @@ compatible = "dlg,da9053-aa", "dlg,da9052"; reg = <0x48>; interrupt-parent = <&gpio7>; - interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */ + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* low-level active IRQ at GPIO7_11 */ regulators { buck1_reg: buck1 { diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 3d65c0192f69..1a7a7bb3df45 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -88,9 +88,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <0>; - ckil { compatible = "fsl,imx-ckil", "fixed-clock"; #clock-cells = <0>; @@ -488,6 +485,10 @@ remote-endpoint = <&ipu_di0_lvds0>; }; }; + + port@2 { + reg = <2>; + }; }; lvds-channel@1 { @@ -503,6 +504,10 @@ remote-endpoint = <&ipu_di1_lvds1>; }; }; + + port@2 { + reg = <2>; + }; }; }; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts index 7128c76d5721..29940ba215a8 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts @@ -78,8 +78,6 @@ &ecspi1 { lcd_panel: display@0 { - #address-cells = <1>; - #size-cells = <1>; compatible = "lg,lg4573"; spi-max-frequency = <10000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts index ea184d108491..3dee3af1a4c1 100644 --- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts @@ -72,15 +72,12 @@ stdout-path = "serial0:115200n8"; }; - clocks { - /* Fixed crystal dedicated to mcp251x */ - clk16m: clk@1 { - compatible = "fixed-clock"; - reg = <1>; - #clock-cells = <0>; - clock-frequency = <16000000>; - clock-output-names = "clk16m"; - }; + /* Fixed crystal dedicated to mcp251x */ + clk16m: clock-16m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <16000000>; + clock-output-names = "clk16m"; }; gpio-keys { diff --git a/arch/arm/boot/dts/imx6dl-mamoj.dts b/arch/arm/boot/dts/imx6dl-mamoj.dts new file mode 100644 index 000000000000..6b2d29138bed --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-mamoj.dts @@ -0,0 +1,224 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 BTicino + * Copyright (C) 2018 Amarula Solutions B.V. + */ + +/dts-v1/; + +#include "imx6dl.dtsi" + +/ { + model = "BTicino i.MX6DL Mamoj board"; + compatible = "bticino,imx6dl-mamoj", "fsl,imx6dl"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "mii"; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + pfuze100: pmic@8 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + /* CPU vdd_arm core */ + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + /* SOC vdd_soc */ + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + /* I/O power GEN_3V3 */ + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + /* DDR memory */ + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + /* DDR memory */ + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + /* not used */ + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + /* not used */ + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + /* PMIC vsnvs. EX boot mode */ + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + /* not used */ + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + /* not used */ + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + /* not used */ + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + /* 1v8 general power */ + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + /* 2v8 general power IMX6 */ + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + /* 3v3 Ethernet */ + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + non-removable; + keep-power-in-suspend; + status = "okay"; +}; + +&iomuxc { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b1 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__ENET_TX_DATA2 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__ENET_TX_DATA3 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_GPIO_19__ENET_TX_ER 0x1b0b0 + MX6QDL_PAD_GPIO_18__ENET_RX_CLK 0x1b0b1 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_KEY_COL2__ENET_RX_DATA2 0x1b0b0 + MX6QDL_PAD_KEY_COL0__ENET_RX_DATA3 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 + MX6QDL_PAD_KEY_COL3__ENET_CRS 0x1b0b0 + MX6QDL_PAD_KEY_ROW1__ENET_COL 0x1b0b0 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__I2C4_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_8__I2C4_SDA 0x4001b8b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-sabreauto.dts b/arch/arm/boot/dts/imx6dl-sabreauto.dts index a6ce7b487ad7..660d52a245ba 100644 --- a/arch/arm/boot/dts/imx6dl-sabreauto.dts +++ b/arch/arm/boot/dts/imx6dl-sabreauto.dts @@ -1,10 +1,6 @@ -/* - * Copyright (C) 2013 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2013 Freescale Semiconductor, Inc. /dts-v1/; diff --git a/arch/arm/boot/dts/imx6dl-sabresd.dts b/arch/arm/boot/dts/imx6dl-sabresd.dts index 9607afe088fc..cd6bbf22a16f 100644 --- a/arch/arm/boot/dts/imx6dl-sabresd.dts +++ b/arch/arm/boot/dts/imx6dl-sabresd.dts @@ -1,10 +1,6 @@ -/* - * Copyright (C) 2013 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2013 Freescale Semiconductor, Inc. /dts-v1/; diff --git a/arch/arm/boot/dts/imx6dl-udoo.dts b/arch/arm/boot/dts/imx6dl-udoo.dts index e3713f00e819..d871cac1711f 100644 --- a/arch/arm/boot/dts/imx6dl-udoo.dts +++ b/arch/arm/boot/dts/imx6dl-udoo.dts @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright 2013 Freescale Semiconductor, Inc. * * Author: Fabio Estevam <fabio.estevam@freescale.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ /dts-v1/; #include "imx6dl.dtsi" diff --git a/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts b/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts index 5727fa48cfd5..738db4fc7702 100644 --- a/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts +++ b/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright 2013 Freescale Semiconductor, Inc. * * Author: Fabio Estevam <fabio.estevam@freescale.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ /dts-v1/; #include "imx6dl.dtsi" diff --git a/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts b/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts index a72c07db7dda..51de6b4bd7d8 100644 --- a/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts +++ b/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright 2013 Freescale Semiconductor, Inc. * * Author: Fabio Estevam <fabio.estevam@freescale.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ /dts-v1/; #include "imx6dl.dtsi" diff --git a/arch/arm/boot/dts/imx6dl-wandboard.dts b/arch/arm/boot/dts/imx6dl-wandboard.dts index a09f274cd1f4..b43454deaa1a 100644 --- a/arch/arm/boot/dts/imx6dl-wandboard.dts +++ b/arch/arm/boot/dts/imx6dl-wandboard.dts @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright 2013 Freescale Semiconductor, Inc. * * Author: Fabio Estevam <fabio.estevam@freescale.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ /dts-v1/; #include "imx6dl.dtsi" diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index 558bce81209d..b384913c34dd 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -1,12 +1,6 @@ - -/* - * Copyright 2013 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2013 Freescale Semiconductor, Inc. #include <dt-bindings/interrupt-controller/irq.h> #include "imx6dl-pinfunc.h" diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts index 35edbdc7bcd1..044a5bebe1c5 100644 --- a/arch/arm/boot/dts/imx6q-b850v3.dts +++ b/arch/arm/boot/dts/imx6q-b850v3.dts @@ -156,8 +156,6 @@ stdp2690@72 { compatible = "megachips,stdp2690-ge-b850v3-fw"; - #address-cells = <1>; - #size-cells = <0>; reg = <0x72>; ports { @@ -184,8 +182,6 @@ stdp4028@73 { compatible = "megachips,stdp4028-ge-b850v3-fw"; - #address-cells = <1>; - #size-cells = <0>; reg = <0x73>; interrupt-parent = <&gpio2>; interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi index bf4bdb385de9..e903c488287b 100644 --- a/arch/arm/boot/dts/imx6q-ba16.dtsi +++ b/arch/arm/boot/dts/imx6q-ba16.dtsi @@ -157,7 +157,12 @@ partition@d0000 { label = "spare"; - reg = <0xd0000 0x130000>; + reg = <0xd0000 0x320000>; + }; + + partition@3f0000 { + label = "mfg"; + reg = <0x3f0000 0x10000>; }; }; }; diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi index 990e411cbca0..d3cba09be0cb 100644 --- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi +++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi @@ -43,13 +43,10 @@ #include "imx6q-ba16.dtsi" / { - clocks { - mclk: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <22000000>; - }; + mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <22000000>; }; gpio-poweroff { @@ -107,8 +104,6 @@ switch@0 { compatible = "marvell,mv88e6085"; /* 88e6240*/ - #address-cells = <1>; - #size-cells = <0>; reg = <0>; switch_ports: ports { diff --git a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts new file mode 100644 index 000000000000..9c61e3be2d9a --- /dev/null +++ b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts @@ -0,0 +1,151 @@ +// SPDX-License-Identifier: (GPL-2.0+) +/* + * Copyright (C) 2015 DH electronics GmbH + * Copyright (C) 2018 Marek Vasut <marex@denx.de> + */ + +/dts-v1/; + +#include "imx6q-dhcom-som.dtsi" + +/ { + model = "Freescale i.MX6 Quad DHCOM Premium Developer Kit (2)"; + compatible = "dh,imx6q-dhcom-pdk2", "dh,imx6q-dhcom-som", "fsl,imx6q"; + + chosen { + stdout-path = &uart1; + }; + + clk_ext_audio_codec: clock-codec { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + sound { + compatible = "fsl,imx-audio-sgtl5000"; + model = "imx-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <3>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux_ext>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c2 { + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + #sound-dai-cells = <0>; + clocks = <&clk_ext_audio_codec>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_base &pinctrl_hog>; + + pinctrl_hog: hog-grp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x400120b0 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x400120b0 + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x400120b0 + MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x400120b0 + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x120b0 + MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x400120b0 + MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x120b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x120b0 + MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x400120b0 + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x400120b0 + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x400120b0 + MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x400120b0 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x400120b0 + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x400120b0 + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x400120b0 + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x400120b0 + MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0x400120b0 + MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x400120b0 + MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x400120b0 + MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x400120b0 + MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x400120b0 + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x400120b0 + MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x400120b0 + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x400120b0 + >; + }; + + pinctrl_audmux_ext: audmux-ext-grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_enet_1G: enet-1G-grp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x000b0 + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x000b1 + MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x000b1 + >; + }; + + pinctrl_pcie: pcie-grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b1 + >; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio6 14 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&usdhc3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi new file mode 100644 index 000000000000..bbba0671f0f4 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi @@ -0,0 +1,476 @@ +// SPDX-License-Identifier: (GPL-2.0+) +/* + * Copyright (C) 2015 DH electronics GmbH + * Copyright (C) 2018 Marek Vasut <marex@denx.de> + */ + +#include "imx6q.dtsi" +#include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/imx6qdl-clock.h> +#include <dt-bindings/input/input.h> + +/ { + aliases { + mmc0 = &usdhc2; + mmc1 = &usdhc3; + mmc2 = &usdhc4; + mmc3 = &usdhc1; + }; + + memory@10000000 { + reg = <0x10000000 0x40000000>; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usb_h1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_3p3v: regulator-3P3V { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&ecspi1 { + cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>, <&gpio4 11 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash@0 { /* S25FL116K */ + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + reg = <0>; + m25p,fast-read; + }; +}; + +&ecspi2 { + cs-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_100M>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { /* SMSC LAN8710Ai */ + reg = <0>; + max-speed = <100>; + reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + reset-delay-us = <1000>; + reset-post-delay-us = <1000>; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + ltc3676: pmic@3c { + compatible = "lltc,ltc3676"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic_hw300>; + reg = <0x3c>; + interrupt-parent = <&gpio5>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + + regulators { + sw1_reg: sw1 { + regulator-min-microvolt = <787500>; + regulator-max-microvolt = <1527272>; + lltc,fb-voltage-divider = <100000 110000>; + regulator-suspend-mem-microvolt = <1040000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <1885714>; + regulator-max-microvolt = <3657142>; + lltc,fb-voltage-divider = <100000 28000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3_reg: sw3 { + regulator-min-microvolt = <787500>; + regulator-max-microvolt = <1527272>; + lltc,fb-voltage-divider = <100000 110000>; + regulator-suspend-mem-microvolt = <980000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <855571>; + regulator-max-microvolt = <1659291>; + lltc,fb-voltage-divider = <100000 93100>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + regulator-min-microvolt = <3240306>; + regulator-max-microvolt = <3240306>; + lltc,fb-voltage-divider = <102000 29400>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: ldo2 { + regulator-min-microvolt = <2484708>; + regulator-max-microvolt = <2484708>; + lltc,fb-voltage-divider = <100000 41200>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + touchscreen@49 { /* TSC2004 */ + compatible = "ti,tsc2004"; + reg = <0x49>; + vio-supply = <®_3p3v>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tsc2004_hw300>; + interrupts-extended = <&gpio4 14 IRQ_TYPE_EDGE_FALLING>; + status = "disabled"; + }; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + rtc@56 { + compatible = "rv3029c2"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc_hw300>; + reg = <0x56>; + interrupt-parent = <&gpio7>; + interrupts = <12 2>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_base>; + + pinctrl_hog_base: hog-base-grp { + fsl,pins = < + MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x120b0 + MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x120b0 + MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x120b0 + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x120b0 + MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x120b0 + >; + }; + + pinctrl_ecspi1: ecspi1-grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 + >; + }; + + pinctrl_ecspi2: ecspi2-grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK 0x100b1 + MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29 0x1b0b0 + >; + }; + + pinctrl_enet_100M: enet-100M-grp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x000b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b1 + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x120b0 + >; + }; + + pinctrl_flexcan1: flexcan1-grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0 + MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2-grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0 + MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1-grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2-grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3-grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_pmic_hw300: pmic-hw300-grp { + fsl,pins = < + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1B0B0 + >; + }; + + pinctrl_rtc_hw300: rtc-hw300-grp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x120B0 + >; + }; + + pinctrl_tsc2004_hw300: tsc2004-hw300-grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x120B0 + >; + }; + + pinctrl_uart1: uart1-grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D20__UART1_RTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D19__UART1_CTS_B 0x4001b0b1 + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x4001b0b1 + MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x4001b0b1 + MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x4001b0b1 + MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x4001b0b1 + >; + }; + + pinctrl_uart4: uart4-grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5-grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B 0x1b0b1 + MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B 0x4001b0b1 + >; + }; + + pinctrl_usbh1: usbh1-grp { + fsl,pins = < + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x120B0 + >; + }; + + pinctrl_usbotg: usbotg-grp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2-grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x120B0 + >; + }; + + pinctrl_usdhc3: usdhc3-grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x120B0 + >; + }; + + pinctrl_usdhc4: usdhc4-grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; +}; + +®_arm { + vin-supply = <&sw3_reg>; +}; + +®_soc { + vin-supply = <&sw1_reg>; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + uart-has-rtscts; + dtr-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; + dsr-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; + dcd-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; + rng-gpios = <&gpio2 31 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + uart-has-rtscts; + status = "okay"; +}; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + vbus-supply = <®_usb_h1_vbus>; + dr_mode = "host"; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + dr_mode = "otg"; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + cd-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; + keep-power-in-suspend; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 8 GPIO_ACTIVE_LOW>; + fsl,wp-controller; + keep-power-in-suspend; + status = "disabled"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + non-removable; + bus-width = <8>; + no-1-8-v; + keep-power-in-suspend; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-gk802.dts b/arch/arm/boot/dts/imx6q-gk802.dts index 0be375611382..84d3540b3a97 100644 --- a/arch/arm/boot/dts/imx6q-gk802.dts +++ b/arch/arm/boot/dts/imx6q-gk802.dts @@ -8,6 +8,7 @@ /dts-v1/; #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include "imx6q.dtsi" / { @@ -43,7 +44,7 @@ recovery-button { label = "recovery"; gpios = <&gpio3 16 1>; - linux,code = <0x198>; /* KEY_RESTART */ + linux,code = <KEY_RESTART>; wakeup-source; }; }; diff --git a/arch/arm/boot/dts/imx6q-icore-mipi.dts b/arch/arm/boot/dts/imx6q-icore-mipi.dts new file mode 100644 index 000000000000..acd3d33476d4 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-icore-mipi.dts @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2017 Engicam S.r.l. + * Copyright (C) 2017 Amarula Solutions B.V. + * Author: Jagan Teki <jagan@amarulasolutions.com> + */ + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-icore.dtsi" + +/ { + model = "Engicam i.CoreM6 Quad/Dual MIPI Starter Kit"; + compatible = "engicam,imx6-icore", "fsl,imx6q"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&usdhc3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-icore-ofcap12.dts b/arch/arm/boot/dts/imx6q-icore-ofcap12.dts index 9e230f56c5fb..6e27c8143f82 100644 --- a/arch/arm/boot/dts/imx6q-icore-ofcap12.dts +++ b/arch/arm/boot/dts/imx6q-icore-ofcap12.dts @@ -48,28 +48,31 @@ / { model = "Engicam i.CoreM6 Quad/Dual OpenFrame Capacitive touch 12 Kit"; compatible = "engicam,imx6-icore", "fsl,imx6q"; + + panel { + compatible = "koe,tx31d200vm0baa"; + backlight = <&backlight_lvds>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; }; &ldb { status = "okay"; lvds-channel@0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; + reg = <0>; status = "okay"; - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <46800000>; - hactive = <1280>; - vactive = <480>; - hback-porch = <353>; - hfront-porch = <47>; - vback-porch = <39>; - vfront-porch = <4>; - hsync-len = <8>; - vsync-len = <2>; + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; }; }; }; diff --git a/arch/arm/boot/dts/imx6q-kp-tpc.dts b/arch/arm/boot/dts/imx6q-kp-tpc.dts new file mode 100644 index 000000000000..302d8d06e4cc --- /dev/null +++ b/arch/arm/boot/dts/imx6q-kp-tpc.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2018 + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + */ + +/dts-v1/; + +#include "imx6q-kp.dtsi" + +/ { + model = "Freescale i.MX6 Qwuad K+P TPC Board"; + compatible = "kiebackpeter,imx6q-tpc", "fsl,imx6q"; + + memory@10000000 { + reg = <0x10000000 0x40000000>; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; +}; diff --git a/arch/arm/boot/dts/imx6q-kp.dtsi b/arch/arm/boot/dts/imx6q-kp.dtsi new file mode 100644 index 000000000000..24c8169baf44 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-kp.dtsi @@ -0,0 +1,432 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2018 + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + */ + +/dts-v1/; + +#include "imx6q.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/sound/fsl-imx-audmux.h> + +/ { + backlight_lcd: backlight-lcd { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 255>; + num-interpolated-steps = <255>; + default-brightness-level = <250>; + }; + + beeper { + compatible = "pwm-beeper"; + pwms = <&pwm2 0 500000>; + }; + + lcd_display: display { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1>; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + lcd_panel: lcd-panel { + compatible = "auo,g070vvn01"; + backlight = <&backlight_lcd>; + power-supply = <®_display>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + green { + label = "led1"; + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "gpio"; + default-state = "off"; + }; + + red { + label = "led0"; + gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "gpio"; + default-state = "off"; + }; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_audio: regulator-audio { + compatible = "regulator-fixed"; + regulator-name = "sgtl5000-supply"; + gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_display: regulator-display { + compatible = "regulator-fixed"; + regulator-name = "display-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_h1_vbus: regulator-usb_h1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "imx6q-sgtl5000-audio"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&codec_dai>; + simple-audio-card,frame-master = <&codec_dai>; + + cpu_dai: simple-audio-card,cpu { + sound-dai = <&ssi1>; + }; + + codec_dai: simple-audio-card,codec { + sound-dai = <&sgtl5000>; + }; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; + + ssi1 { + fsl,audmux-port = <0>; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_SYN | + IMX_AUDMUX_V2_PTCR_TFSEL(2) | + IMX_AUDMUX_V2_PTCR_TCSEL(2) | + IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TCLKDIR) + IMX_AUDMUX_V2_PDCR_RXDSEL(2) + >; + }; + + aud3 { + fsl,audmux-port = <2>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN + IMX_AUDMUX_V2_PDCR_RXDSEL(0) + >; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + fsl,magic-packet; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + touchscreen@5d { + compatible = "goodix,gt911"; + reg = <0x5d>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ts>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + irq-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; + }; + + ds1307: rtc@32 { + compatible = "dallas,ds1307"; + reg = <0x32>; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + sgtl5000: audio-codec@a { + compatible = "fsl,sgtl5000"; + #sound-dai-cells = <0>; + reg = <0x0a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_codec>; + clocks = <&clks IMX6QDL_CLK_CKO>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + }; +}; + +&iomuxc { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_codec: codecgrp { + fsl,pins = < + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b0 + /* sgtl5000 sys_mclk clock routed to CLKO1 */ + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + >; + }; + + pinctrl_flexcan1: can1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 + MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0 + >; + }; + + pinctrl_flexcan2: can2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_ipu1: ipu1grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_ts: tsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D28__UART2_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D29__UART2_RTS_B 0x1b0b1 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; +}; + +&usbh1 { + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + no-1-8-v; + keep-power-in-suspend; + status = "okay"; +}; + +&wdog1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts index 52f39371188d..fcd824dc485b 100644 --- a/arch/arm/boot/dts/imx6q-novena.dts +++ b/arch/arm/boot/dts/imx6q-novena.dts @@ -268,8 +268,6 @@ touch: stmpe811@44 { compatible = "st,stmpe811"; reg = <0x44>; - #address-cells = <1>; - #size-cells = <0>; irq-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>; id = <0>; blocks = <0x5>; diff --git a/arch/arm/boot/dts/imx6q-pistachio.dts b/arch/arm/boot/dts/imx6q-pistachio.dts index bd57b3b74db7..a31e83cd07a3 100644 --- a/arch/arm/boot/dts/imx6q-pistachio.dts +++ b/arch/arm/boot/dts/imx6q-pistachio.dts @@ -614,7 +614,7 @@ &uart5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart5>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-sabreauto.dts b/arch/arm/boot/dts/imx6q-sabreauto.dts index 334b9247e78c..6e981a3e0a83 100644 --- a/arch/arm/boot/dts/imx6q-sabreauto.dts +++ b/arch/arm/boot/dts/imx6q-sabreauto.dts @@ -1,14 +1,7 @@ -/* - * Copyright 2012 Freescale Semiconductor, Inc. - * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright 2012 Freescale Semiconductor, Inc. +// Copyright 2011 Linaro Ltd. /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts index 527772b62fee..eec944673c0b 100644 --- a/arch/arm/boot/dts/imx6q-sabresd.dts +++ b/arch/arm/boot/dts/imx6q-sabresd.dts @@ -1,14 +1,7 @@ -/* - * Copyright 2012 Freescale Semiconductor, Inc. - * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright 2012 Freescale Semiconductor, Inc. +// Copyright 2011 Linaro Ltd. /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-udoo.dts b/arch/arm/boot/dts/imx6q-udoo.dts index c3e64ff3d544..52e9f4a211d0 100644 --- a/arch/arm/boot/dts/imx6q-udoo.dts +++ b/arch/arm/boot/dts/imx6q-udoo.dts @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright 2013 Freescale Semiconductor, Inc. * * Author: Fabio Estevam <fabio.estevam@freescale.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ /dts-v1/; #include "imx6q.dtsi" diff --git a/arch/arm/boot/dts/imx6q-utilite-pro.dts b/arch/arm/boot/dts/imx6q-utilite-pro.dts index f5d9c34b0d39..d16ff2083d62 100644 --- a/arch/arm/boot/dts/imx6q-utilite-pro.dts +++ b/arch/arm/boot/dts/imx6q-utilite-pro.dts @@ -61,8 +61,6 @@ encoder { compatible = "ti,tfp410"; - #address-cells = <1>; - #size-cells = <0>; ports { #address-cells = <1>; diff --git a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts index e0728d475f6f..f2368a073d07 100644 --- a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts +++ b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts @@ -26,8 +26,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; back { diff --git a/arch/arm/boot/dts/imx6q-wandboard-revb1.dts b/arch/arm/boot/dts/imx6q-wandboard-revb1.dts index b763352cddae..be85b980bdfe 100644 --- a/arch/arm/boot/dts/imx6q-wandboard-revb1.dts +++ b/arch/arm/boot/dts/imx6q-wandboard-revb1.dts @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright 2013 Freescale Semiconductor, Inc. * * Author: Fabio Estevam <fabio.estevam@freescale.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ /dts-v1/; #include "imx6q.dtsi" diff --git a/arch/arm/boot/dts/imx6q-wandboard-revd1.dts b/arch/arm/boot/dts/imx6q-wandboard-revd1.dts index 8691fab21058..fcfba28764d4 100644 --- a/arch/arm/boot/dts/imx6q-wandboard-revd1.dts +++ b/arch/arm/boot/dts/imx6q-wandboard-revd1.dts @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright 2013 Freescale Semiconductor, Inc. * * Author: Fabio Estevam <fabio.estevam@freescale.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ /dts-v1/; #include "imx6q.dtsi" diff --git a/arch/arm/boot/dts/imx6q-wandboard.dts b/arch/arm/boot/dts/imx6q-wandboard.dts index 2a3d98c1489a..fa36fe183fc0 100644 --- a/arch/arm/boot/dts/imx6q-wandboard.dts +++ b/arch/arm/boot/dts/imx6q-wandboard.dts @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright 2013 Freescale Semiconductor, Inc. * * Author: Fabio Estevam <fabio.estevam@freescale.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ /dts-v1/; #include "imx6q.dtsi" diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index ae7b3f107893..70483ce72ba6 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -1,12 +1,6 @@ - -/* - * Copyright 2013 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2013 Freescale Semiconductor, Inc. #include <dt-bindings/interrupt-controller/irq.h> #include "imx6q-pinfunc.h" @@ -162,22 +156,27 @@ #size-cells = <0>; reg = <2>; - ipu2_di0_disp0: disp0-endpoint { + ipu2_di0_disp0: endpoint@0 { + reg = <0>; }; - ipu2_di0_hdmi: hdmi-endpoint { + ipu2_di0_hdmi: endpoint@1 { + reg = <1>; remote-endpoint = <&hdmi_mux_2>; }; - ipu2_di0_mipi: mipi-endpoint { + ipu2_di0_mipi: endpoint@2 { + reg = <2>; remote-endpoint = <&mipi_mux_2>; }; - ipu2_di0_lvds0: lvds0-endpoint { + ipu2_di0_lvds0: endpoint@3 { + reg = <3>; remote-endpoint = <&lvds0_mux_2>; }; - ipu2_di0_lvds1: lvds1-endpoint { + ipu2_di0_lvds1: endpoint@4 { + reg = <4>; remote-endpoint = <&lvds1_mux_2>; }; }; @@ -187,19 +186,23 @@ #size-cells = <0>; reg = <3>; - ipu2_di1_hdmi: hdmi-endpoint { + ipu2_di1_hdmi: endpoint@1 { + reg = <1>; remote-endpoint = <&hdmi_mux_3>; }; - ipu2_di1_mipi: mipi-endpoint { + ipu2_di1_mipi: endpoint@2 { + reg = <2>; remote-endpoint = <&mipi_mux_3>; }; - ipu2_di1_lvds0: lvds0-endpoint { + ipu2_di1_lvds0: endpoint@3 { + reg = <3>; remote-endpoint = <&lvds0_mux_3>; }; - ipu2_di1_lvds1: lvds1-endpoint { + ipu2_di1_lvds1: endpoint@4 { + reg = <4>; remote-endpoint = <&lvds1_mux_3>; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index 8206683172d2..64fbee61de44 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -331,8 +331,6 @@ compatible = "st,stmpe811"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_touch_int>; - #address-cells = <1>; - #size-cells = <0>; reg = <0x41>; interrupts = <10 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&gpio4>; diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi index e4eb300549d4..76035db96f67 100644 --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -262,8 +262,6 @@ compatible = "st,stmpe811"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_touch_int>; - #address-cells = <1>; - #size-cells = <0>; reg = <0x41>; interrupts = <20 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&gpio6>; diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi index 58124adfd65b..3c52bdb453f3 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi @@ -162,8 +162,6 @@ switch@0 { compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; reg = <0>; ports { diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi index 7e20b47de839..0e64016e765f 100644 --- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi @@ -38,6 +38,7 @@ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ +#include <dt-bindings/sound/fsl-imx-audmux.h> / { /* Will be filled by the bootloader */ @@ -110,17 +111,27 @@ vin-supply = <&v_5v0>; }; - sound-sgtl5000 { - audio-codec = <&sgtl5000>; - audio-routing = - "MIC_IN", "Mic Jack", - "Mic Jack", "Mic Bias", + audio: sound-sgtl5000 { + compatible = "simple-audio-card"; + simple-audio-card,name = "On-board Codec"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_codec>; + simple-audio-card,frame-master = <&sound_codec>; + simple-audio-card,widgets = + "Microphone", "Headphone Jack", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "MIC_IN", "Headphone Jack", + "Headphone Jack", "Mic Bias", "Headphone Jack", "HP_OUT"; - compatible = "fsl,imx-audio-sgtl5000"; - model = "On-board Codec"; - mux-ext-port = <5>; - mux-int-port = <1>; - ssi-controller = <&ssi1>; + + sound_cpu: simple-audio-card,cpu { + sound-dai = <&ssi1>; + }; + + sound_codec: simple-audio-card,codec { + sound-dai = <&sgtl5000>; + }; }; sound-spdif { @@ -134,6 +145,26 @@ &audmux { status = "okay"; + + ssi1 { + fsl,audmux-port = <0>; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_SYN | + IMX_AUDMUX_V2_PTCR_TFSEL(4) | + IMX_AUDMUX_V2_PTCR_TCSEL(4) | + IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TCLKDIR) + IMX_AUDMUX_V2_PDCR_RXDSEL(4) + >; + }; + + pins5 { + fsl,audmux-port = <4>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN + IMX_AUDMUX_V2_PDCR_RXDSEL(0) + >; + }; }; &can1 { @@ -166,6 +197,7 @@ compatible = "fsl,sgtl5000"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard_sgtl5000>; + #sound-dai-cells = <0>; reg = <0x0a>; VDDA-supply = <&v_3v2>; VDDIO-supply = <&v_3v2>; diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi index 98241acb08a6..c413f9c3540f 100644 --- a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi @@ -38,6 +38,7 @@ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ +#include <dt-bindings/sound/fsl-imx-audmux.h> / { /* Will be filled by the bootloader */ @@ -150,22 +151,52 @@ vin-supply = <&v_5v0>; }; - sound-sgtl5000 { - audio-codec = <&sgtl5000>; - audio-routing = + audio: sound-sgtl5000 { + compatible = "simple-audio-card"; + simple-audio-card,name = "On-board Codec"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_codec>; + simple-audio-card,frame-master = <&sound_codec>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = "MIC_IN", "Mic Jack", "Mic Jack", "Mic Bias", "Headphone Jack", "HP_OUT"; - compatible = "fsl,imx-audio-sgtl5000"; - model = "On-board Codec"; - mux-ext-port = <5>; - mux-int-port = <1>; - ssi-controller = <&ssi1>; + + sound_cpu: simple-audio-card,cpu { + sound-dai = <&ssi1>; + }; + + sound_codec: simple-audio-card,codec { + sound-dai = <&sgtl5000>; + }; }; }; &audmux { status = "okay"; + + ssi1 { + fsl,audmux-port = <0>; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_SYN | + IMX_AUDMUX_V2_PTCR_TFSEL(4) | + IMX_AUDMUX_V2_PTCR_TCSEL(4) | + IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TCLKDIR) + IMX_AUDMUX_V2_PDCR_RXDSEL(4) + >; + }; + + pins5 { + fsl,audmux-port = <4>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN + IMX_AUDMUX_V2_PDCR_RXDSEL(0) + >; + }; }; &ecspi2 { diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi index b3a463a5908b..0a1574998fc6 100644 --- a/arch/arm/boot/dts/imx6qdl-icore.dtsi +++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi @@ -49,7 +49,7 @@ reg = <0x10000000 0x80000000>; }; - backlight { + backlight_lvds: backlight-lvds { compatible = "pwm-backlight"; pwms = <&pwm3 0 100000>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -265,6 +265,14 @@ status = "okay"; }; +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + no-1-8-v; + non-removable; + status = "disabled"; +}; + &iomuxc { pinctrl_audmux: audmux { fsl,pins = < @@ -378,4 +386,19 @@ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17070 >; }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + >; + }; }; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index c58f3443d55d..ed1aafd56973 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -115,7 +115,7 @@ compatible = "dlg,da9063"; reg = <0x58>; interrupt-parent = <&gpio2>; - interrupts = <9 0x8>; /* active-low GPIO2_9 */ + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; /* active-low GPIO2_9 */ regulators { vddcore_reg: bcore1 { diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 54b0139e978d..0e28e36ddbb2 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -1,14 +1,7 @@ -/* - * Copyright 2012 Freescale Semiconductor, Inc. - * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright 2012 Freescale Semiconductor, Inc. +// Copyright 2011 Linaro Ltd. #include <dt-bindings/gpio/gpio.h> diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 18b65052553d..654cf2c9b073 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -379,9 +379,6 @@ powerdown-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* NANDF_WP_B */ port { - #address-cells = <1>; - #size-cells = <0>; - ov5640_to_mipi_csi2: endpoint { remote-endpoint = <&mipi_csi2_in>; clock-lanes = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index f019f9900369..15744ad52535 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -1,14 +1,7 @@ -/* - * Copyright 2012 Freescale Semiconductor, Inc. - * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright 2012 Freescale Semiconductor, Inc. +// Copyright 2011 Linaro Ltd. #include <dt-bindings/clock/imx6qdl-clock.h> #include <dt-bindings/gpio/gpio.h> @@ -294,9 +287,6 @@ reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; port { - #address-cells = <1>; - #size-cells = <0>; - ov5640_to_mipi_csi2: endpoint { remote-endpoint = <&mipi_csi2_in>; clock-lanes = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi b/arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi index 5102fc47380b..79f2354886b7 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi @@ -77,7 +77,6 @@ enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; power-supply = <®_3v3>; backlight = <&backlight>; - bus-format-override = "rgb24"; port { lcd_panel_in: endpoint { diff --git a/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi b/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi index 4c4e2e1a931f..410972e1dca9 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi @@ -54,19 +54,16 @@ lcd-panel { compatible = "edt,et057090dhu"; - bus-format-override = "rgb24"; pixelclk-active = <0>; }; lvds0-panel { compatible = "edt,etml1010g0dka"; - bus-format-override = "spwg-18"; pixelclk-active = <0>; }; lvds1-panel { compatible = "edt,etml1010g0dka"; - bus-format-override = "spwg-18"; pixelclk-active = <0>; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index f015e2d1cf35..a98fb2564c63 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -50,11 +50,11 @@ can0 = &can2; can1 = &can1; ethernet0 = &fec; - lcdif_23bit_pins_a = &pinctrl_disp0_1; - lcdif_24bit_pins_a = &pinctrl_disp0_2; + lcdif-23bit-pins-a = &pinctrl_disp0_1; + lcdif-24bit-pins-a = &pinctrl_disp0_2; pwm0 = &pwm1; pwm1 = &pwm2; - reg_can_xcvr = ®_can_xcvr; + reg-can-xcvr = ®_can_xcvr; stk5led = &user_led; usbotg = &usbotg; sdhc0 = &usdhc1; diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi index 906387915dc5..4f27861bbb32 100644 --- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi +++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright 2013 Freescale Semiconductor, Inc. * * Author: Fabio Estevam <fabio.estevam@freescale.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ / { diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi index a32089132263..855dc6f9df75 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi @@ -17,7 +17,6 @@ imx6qdl-wandboard { pinctrl_hog: hoggrp { fsl,pins = < - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* GPIO_0_CLKO */ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* uSDHC1 CD */ MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000 /* uSDHC3 CD */ MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x0f0b0 /* WL_REF_ON */ diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi index 8d893a78cdf0..49a0a557e62e 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi @@ -17,7 +17,6 @@ imx6qdl-wandboard { pinctrl_hog: hoggrp { fsl,pins = < - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* GPIO_0_CLKO */ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* uSDHC1 CD */ MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000 /* uSDHC3 CD */ MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00 0x0f0b0 /* WIFI_ON (reset, active low) */ diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi index 3a8a4952d45e..69d9c8661439 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi @@ -147,7 +147,6 @@ imx6qdl-wandboard { pinctrl_hog: hoggrp { fsl,pins = < - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 MX6QDL_PAD_EIM_D22__USB_OTG_PWR 0x80000000 /* USB Power Enable */ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* USDHC1 CD */ MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000 /* uSDHC3 CD */ diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi index ed96d7b5feab..e1afa54404d0 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright 2013 Freescale Semiconductor, Inc. * * Author: Fabio Estevam <fabio.estevam@freescale.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <dt-bindings/gpio/gpio.h> @@ -83,6 +79,8 @@ status = "okay"; codec: sgtl5000@a { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mclk>; compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; @@ -142,6 +140,12 @@ >; }; + pinctrl_mclk: mclkgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 + >; + }; + pinctrl_spdif: spdifgrp { fsl,pins = < MX6QDL_PAD_ENET_RXD0__SPDIF_OUT 0x1b0b0 diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index 911f7f0e3cea..19a075aee19e 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -263,6 +263,17 @@ }; }; +&cpu0 { + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 1200000 1300000 + 996000 1275000 + 852000 1275000 + 792000 1200000 + 396000 1200000 + >; +}; + ®_arm { vin-supply = <&sw1a_reg>; }; @@ -571,6 +582,17 @@ }; }; + touchscreen@2a { + compatible = "eeti,egalax_ts"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ts>; + reg = <0x2a>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + wakeup-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + status = "disabled"; + }; + hpa1: amp@60 { compatible = "ti,tpa6130a2"; pinctrl-names = "default"; @@ -666,8 +688,6 @@ compatible = "marvell,mv88e6085"; pinctrl-0 = <&pinctrl_switch_irq>; pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; reg = <0>; dsa,member = <0 0>; eeprom-length = <512>; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index c003e62bf290..911141e24681 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -1,14 +1,7 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. - * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright 2011 Freescale Semiconductor, Inc. +// Copyright 2011 Linaro Ltd. #include <dt-bindings/clock/imx6qdl-clock.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -58,9 +51,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <0>; - ckil { compatible = "fsl,imx-ckil", "fixed-clock"; #clock-cells = <0>; @@ -695,11 +685,8 @@ interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>, <0 54 IRQ_TYPE_LEVEL_HIGH>, <0 127 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - regulator-1p1@20c8110 { - reg = <0x20c8110>; + regulator-1p1 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd1p1"; regulator-min-microvolt = <1000000>; @@ -714,8 +701,7 @@ anatop-enable-bit = <0>; }; - regulator-3p0@20c8120 { - reg = <0x20c8120>; + regulator-3p0 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd3p0"; regulator-min-microvolt = <2800000>; @@ -730,8 +716,7 @@ anatop-enable-bit = <0>; }; - regulator-2p5@20c8130 { - reg = <0x20c8130>; + regulator-2p5 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd2p5"; regulator-min-microvolt = <2250000>; @@ -746,8 +731,7 @@ anatop-enable-bit = <0>; }; - reg_arm: regulator-vddcore@20c8140 { - reg = <0x20c8140>; + reg_arm: regulator-vddcore { compatible = "fsl,anatop-regulator"; regulator-name = "vddarm"; regulator-min-microvolt = <725000>; @@ -764,8 +748,7 @@ anatop-max-voltage = <1450000>; }; - reg_pu: regulator-vddpu@20c8140 { - reg = <0x20c8140>; + reg_pu: regulator-vddpu { compatible = "fsl,anatop-regulator"; regulator-name = "vddpu"; regulator-min-microvolt = <725000>; @@ -782,8 +765,7 @@ anatop-max-voltage = <1450000>; }; - reg_soc: regulator-vddsoc@20c8140 { - reg = <0x20c8140>; + reg_soc: regulator-vddsoc { compatible = "fsl,anatop-regulator"; regulator-name = "vddsoc"; regulator-min-microvolt = <725000>; @@ -1187,8 +1169,6 @@ }; mipi_dsi: mipi@21e0000 { - #address-cells = <1>; - #size-cells = <0>; reg = <0x021e0000 0x4000>; status = "disabled"; @@ -1300,22 +1280,27 @@ #size-cells = <0>; reg = <2>; - ipu1_di0_disp0: disp0-endpoint { + ipu1_di0_disp0: endpoint@0 { + reg = <0>; }; - ipu1_di0_hdmi: hdmi-endpoint { + ipu1_di0_hdmi: endpoint@1 { + reg = <1>; remote-endpoint = <&hdmi_mux_0>; }; - ipu1_di0_mipi: mipi-endpoint { + ipu1_di0_mipi: endpoint@2 { + reg = <2>; remote-endpoint = <&mipi_mux_0>; }; - ipu1_di0_lvds0: lvds0-endpoint { + ipu1_di0_lvds0: endpoint@3 { + reg = <3>; remote-endpoint = <&lvds0_mux_0>; }; - ipu1_di0_lvds1: lvds1-endpoint { + ipu1_di0_lvds1: endpoint@4 { + reg = <4>; remote-endpoint = <&lvds1_mux_0>; }; }; @@ -1325,22 +1310,27 @@ #size-cells = <0>; reg = <3>; - ipu1_di1_disp1: disp1-endpoint { + ipu1_di1_disp1: endpoint@0 { + reg = <0>; }; - ipu1_di1_hdmi: hdmi-endpoint { + ipu1_di1_hdmi: endpoint@1 { + reg = <1>; remote-endpoint = <&hdmi_mux_1>; }; - ipu1_di1_mipi: mipi-endpoint { + ipu1_di1_mipi: endpoint@2 { + reg = <2>; remote-endpoint = <&mipi_mux_1>; }; - ipu1_di1_lvds0: lvds0-endpoint { + ipu1_di1_lvds0: endpoint@3 { + reg = <3>; remote-endpoint = <&lvds0_mux_1>; }; - ipu1_di1_lvds1: lvds1-endpoint { + ipu1_di1_lvds1: endpoint@4 { + reg = <4>; remote-endpoint = <&lvds1_mux_1>; }; }; diff --git a/arch/arm/boot/dts/imx6qp-sabreauto.dts b/arch/arm/boot/dts/imx6qp-sabreauto.dts index 5ce3840d83d3..d4caeeb0af70 100644 --- a/arch/arm/boot/dts/imx6qp-sabreauto.dts +++ b/arch/arm/boot/dts/imx6qp-sabreauto.dts @@ -1,44 +1,6 @@ -/* - * Copyright 2016 Freescale Semiconductor, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Copyright 2016 Freescale Semiconductor, Inc. /dts-v1/; diff --git a/arch/arm/boot/dts/imx6qp-sabresd.dts b/arch/arm/boot/dts/imx6qp-sabresd.dts index a8a5004dd9c8..f1b9cb104fdd 100644 --- a/arch/arm/boot/dts/imx6qp-sabresd.dts +++ b/arch/arm/boot/dts/imx6qp-sabresd.dts @@ -1,44 +1,6 @@ -/* - * Copyright 2016 Freescale Semiconductor, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Copyright 2016 Freescale Semiconductor, Inc. /dts-v1/; diff --git a/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts b/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts index 907ba0c74ba6..bcca5ac5fa51 100644 --- a/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts +++ b/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright 2013 Freescale Semiconductor, Inc. * * Author: Fabio Estevam <fabio.estevam@freescale.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ /dts-v1/; #include "imx6qp.dtsi" diff --git a/arch/arm/boot/dts/imx6qp-zii-rdu2.dts b/arch/arm/boot/dts/imx6qp-zii-rdu2.dts index de5b50df833c..8c293e9f36a7 100644 --- a/arch/arm/boot/dts/imx6qp-zii-rdu2.dts +++ b/arch/arm/boot/dts/imx6qp-zii-rdu2.dts @@ -53,3 +53,8 @@ reg = <0x10000000 0>; }; }; + +&gpu_3d { + assigned-clocks = <&clks IMX6QDL_CLK_GPU3D_SHADER_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL2_PFD1_594M>; +}; diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi index 5f4fdce715c1..5f51f8e5c1fa 100644 --- a/arch/arm/boot/dts/imx6qp.dtsi +++ b/arch/arm/boot/dts/imx6qp.dtsi @@ -1,44 +1,6 @@ -/* - * Copyright 2016 Freescale Semiconductor, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Copyright 2016 Freescale Semiconductor, Inc. #include "imx6q.dtsi" diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index 37e792fdc160..92ad01f676e3 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -1,10 +1,6 @@ -/* - * Copyright (C) 2013 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +//Copyright (C) 2013 Freescale Semiconductor, Inc. /dts-v1/; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index ab6a7e2e7e8f..994e48dc1df0 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -1,11 +1,6 @@ -/* - * Copyright 2013 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2013 Freescale Semiconductor, Inc. #include <dt-bindings/interrupt-controller/irq.h> #include "imx6sl-pinfunc.h" @@ -86,9 +81,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <0>; - ckil { compatible = "fixed-clock"; #clock-cells = <0>; @@ -527,11 +519,8 @@ interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>, <0 54 IRQ_TYPE_LEVEL_HIGH>, <0 127 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - regulator-1p1@20c8110 { - reg = <0x20c8110>; + regulator-1p1 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd1p1"; regulator-min-microvolt = <800000>; @@ -546,8 +535,7 @@ anatop-enable-bit = <0>; }; - regulator-3p0@20c8120 { - reg = <0x20c8120>; + regulator-3p0 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd3p0"; regulator-min-microvolt = <2800000>; @@ -562,8 +550,7 @@ anatop-enable-bit = <0>; }; - regulator-2p5@20c8130 { - reg = <0x20c8130>; + regulator-2p5 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd2p5"; regulator-min-microvolt = <2100000>; @@ -578,8 +565,7 @@ anatop-enable-bit = <0>; }; - reg_arm: regulator-vddcore@20c8140 { - reg = <0x20c8140>; + reg_arm: regulator-vddcore { compatible = "fsl,anatop-regulator"; regulator-name = "vddarm"; regulator-min-microvolt = <725000>; @@ -596,8 +582,7 @@ anatop-max-voltage = <1450000>; }; - reg_pu: regulator-vddpu@20c8140 { - reg = <0x20c8140>; + reg_pu: regulator-vddpu { compatible = "fsl,anatop-regulator"; regulator-name = "vddpu"; regulator-min-microvolt = <725000>; @@ -614,8 +599,7 @@ anatop-max-voltage = <1450000>; }; - reg_soc: regulator-vddsoc@20c8140 { - reg = <0x20c8140>; + reg_soc: regulator-vddsoc { compatible = "fsl,anatop-regulator"; regulator-name = "vddsoc"; regulator-min-microvolt = <725000>; diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts index b58f770c40d9..59e52f504922 100644 --- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts +++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts @@ -48,8 +48,8 @@ compatible = "boundary,imx6sx-nitrogen6sx", "fsl,imx6sx"; aliases { - fb_lcd = &lcdif1; - t_lcd = &t_lcd; + fb-lcd = &lcdif1; + t-lcd = &t_lcd; }; memory@80000000 { diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts index 72da5acf35a2..841a27f3198f 100644 --- a/arch/arm/boot/dts/imx6sx-sabreauto.dts +++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts @@ -1,10 +1,6 @@ -/* - * Copyright (C) 2014 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2014 Freescale Semiconductor, Inc. /dts-v1/; @@ -18,25 +14,67 @@ reg = <0x80000000 0x80000000>; }; - regulators { - compatible = "simple-bus"; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led>; + + user { + label = "debug"; + gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + vcc_sd3: regulator-vcc-sd3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_vcc_sd3>; + regulator-name = "VCC_SD3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&anaclk2 { + clock-frequency = <24576000>; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rgmii"; + phy-handle = <ðphy1>; + fsl,magic-packet; + status = "okay"; + + mdio { #address-cells = <1>; #size-cells = <0>; - vcc_sd3: regulator@0 { - compatible = "regulator-fixed"; + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_vcc_sd3>; - regulator-name = "VCC_SD3"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; - enable-active-high; + }; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; }; }; }; +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + phy-mode = "rgmii"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; @@ -69,78 +107,297 @@ }; &iomuxc { - imx6x-sabreauto { - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1 - MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1 - >; - }; + pinctrl_egalax_int: egalax-intgrp { + fsl,pins = < + MX6SX_PAD_SD4_RESET_B__GPIO6_IO_22 0x10b0 + >; + }; - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17059 - MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10059 - MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17059 - MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17059 - MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17059 - MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17059 - MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x17059 - MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x17059 - MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x17059 - MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x17059 - MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x17059 /* CD */ - MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x17059 /* WP */ - >; - }; + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1 + MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0b1 + MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC 0xa0b9 + MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0b1 + MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0b1 + MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2 0xa0b1 + MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3 0xa0b1 + MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0b1 + MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK 0x3081 + MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081 + MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081 + MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081 + MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081 + MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081 + >; + }; - pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { - fsl,pins = < - MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170b9 - MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100b9 - MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170b9 - MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170b9 - MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170b9 - MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170b9 - MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170b9 - MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170b9 - MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170b9 - MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170b9 - >; - }; + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC 0xa0b9 + MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0xa0b1 + MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0xa0b1 + MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2 0xa0b1 + MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3 0xa0b1 + MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0xa0b1 + MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK 0x3081 + MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x3081 + MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x3081 + MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2 0x3081 + MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3 0x3081 + MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x3081 + >; + }; - pinctrl_usdhc3_200mhz: usdhc3grp-200mhz { - fsl,pins = < - MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170f9 - MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100f9 - MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170f9 - MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170f9 - MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170f9 - MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170f9 - MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170f9 - MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170f9 - MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170f9 - MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170f9 - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO03__I2C2_SDA 0x4001b8b1 + MX6SX_PAD_GPIO1_IO02__I2C2_SCL 0x4001b8b1 + >; + }; - pinctrl_usdhc4: usdhc4grp { - fsl,pins = < - MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059 - MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059 - MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059 - MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059 - MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059 - MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059 - MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x17059 /* CD */ - MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x17059 /* WP */ - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6SX_PAD_KEY_ROW4__I2C3_SDA 0x4001b8b1 + MX6SX_PAD_KEY_COL4__I2C3_SCL 0x4001b8b1 + >; + }; + + pinctrl_led: ledgrp { + fsl,pins = < + MX6SX_PAD_CSI_PIXCLK__GPIO1_IO_24 0x17059 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1 + MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17059 + MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10059 + MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17059 + MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17059 + MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17059 + MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17059 + MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x17059 + MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x17059 + MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x17059 + MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x17059 + MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x17059 /* CD */ + MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x17059 /* WP */ + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { + fsl,pins = < + MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170b9 + MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100b9 + MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170b9 + MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170b9 + MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170b9 + MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170b9 + MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170b9 + MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170b9 + MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170b9 + MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp-200mhz { + fsl,pins = < + MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170f9 + MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100f9 + MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170f9 + MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170f9 + MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170f9 + MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170f9 + MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170f9 + MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170f9 + MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170f9 + MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170f9 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059 + MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059 + MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059 + MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059 + MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059 + MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059 + MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x17059 /* CD */ + MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x17059 /* WP */ + >; + }; + + pinctrl_vcc_sd3: vccsd3grp { + fsl,pins = < + MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY 0x30b0 + >; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + touchscreen@4 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_egalax_int>; + interrupt-parent = <&gpio6>; + interrupts = <22 IRQ_TYPE_EDGE_FALLING>; + wakeup-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; + }; + + pfuze100: pmic@8 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; - pinctrl_vcc_sd3: vccsd3grp { - fsl,pins = < - MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059 - >; + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; }; }; + + max7322: gpio@68 { + compatible = "maxim,max7322"; + reg = <0x68>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + max7310_a: gpio@30 { + compatible = "maxim,max7310"; + reg = <0x30>; + gpio-controller; + #gpio-cells = <2>; + }; + + max7310_b: gpio@32 { + compatible = "maxim,max7310"; + reg = <0x32>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; }; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 49c7205b8db8..d8b94f47498b 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -1,10 +1,6 @@ -/* - * Copyright 2014 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2014 Freescale Semiconductor, Inc. #include <dt-bindings/clock/imx6sx-clock.h> #include <dt-bindings/gpio/gpio.h> @@ -104,41 +100,46 @@ interrupt-parent = <&intc>; }; - clocks { - #address-cells = <1>; - #size-cells = <0>; + ckil: clock-ckil { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "ckil"; + }; - ckil: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "ckil"; - }; + osc: clock-osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc"; + }; - osc: clock@1 { - compatible = "fixed-clock"; - reg = <1>; - #clock-cells = <0>; - clock-frequency = <24000000>; - clock-output-names = "osc"; - }; + ipp_di0: clock-ipp-di0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "ipp_di0"; + }; - ipp_di0: clock@2 { - compatible = "fixed-clock"; - reg = <2>; - #clock-cells = <0>; - clock-frequency = <0>; - clock-output-names = "ipp_di0"; - }; + ipp_di1: clock-ipp-di1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "ipp_di1"; + }; - ipp_di1: clock@3 { - compatible = "fixed-clock"; - reg = <3>; - #clock-cells = <0>; - clock-frequency = <0>; - clock-output-names = "ipp_di1"; - }; + anaclk1: clock-anaclk1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "anaclk1"; + }; + + anaclk2: clock-anaclk2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "anaclk2"; }; tempmon: tempmon { @@ -575,8 +576,8 @@ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; #clock-cells = <1>; - clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>; - clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; + clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>, <&anaclk1>, <&anaclk2>; + clock-names = "ckil", "osc", "ipp_di0", "ipp_di1", "anaclk1", "anaclk2"; }; anatop: anatop@20c8000 { @@ -586,11 +587,8 @@ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - regulator-1p1@20c8110 { - reg = <0x20c8110>; + regulator-1p1 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd1p1"; regulator-min-microvolt = <800000>; @@ -605,8 +603,7 @@ anatop-enable-bit = <0>; }; - regulator-3p0@20c8120 { - reg = <0x20c8120>; + regulator-3p0 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd3p0"; regulator-min-microvolt = <2800000>; @@ -621,8 +618,7 @@ anatop-enable-bit = <0>; }; - regulator-2p5@20c8130 { - reg = <0x20c8130>; + regulator-2p5 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd2p5"; regulator-min-microvolt = <2100000>; @@ -637,8 +633,7 @@ anatop-enable-bit = <0>; }; - reg_arm: regulator-vddcore@20c8140 { - reg = <0x20c8140>; + reg_arm: regulator-vddcore { compatible = "fsl,anatop-regulator"; regulator-name = "vddarm"; regulator-min-microvolt = <725000>; @@ -655,8 +650,7 @@ anatop-max-voltage = <1450000>; }; - reg_pcie: regulator-vddpcie@20c8140 { - reg = <0x20c8140>; + reg_pcie: regulator-vddpcie { compatible = "fsl,anatop-regulator"; regulator-name = "vddpcie"; regulator-min-microvolt = <725000>; @@ -672,8 +666,7 @@ anatop-max-voltage = <1450000>; }; - reg_soc: regulator-vddsoc@20c8140 { - reg = <0x20c8140>; + reg_soc: regulator-vddsoc { compatible = "fsl,anatop-regulator"; regulator-name = "vddsoc"; regulator-min-microvolt = <725000>; diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts index 6d720b20e7ed..2438669f149a 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts @@ -1,10 +1,6 @@ -/* - * Copyright (C) 2015 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2015 Freescale Semiconductor, Inc. /dts-v1/; diff --git a/arch/arm/boot/dts/imx6ul-isiot.dtsi b/arch/arm/boot/dts/imx6ul-isiot.dtsi index 921e12c69a00..cd9928551154 100644 --- a/arch/arm/boot/dts/imx6ul-isiot.dtsi +++ b/arch/arm/boot/dts/imx6ul-isiot.dtsi @@ -153,8 +153,6 @@ stmpe811: gpio-expander@44 { compatible = "st,stmpe811"; reg = <0x44>; - #address-cells = <1>; - #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_stmpe>; interrupt-parent = <&gpio1>; diff --git a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts index 2d80f7b50bc0..97686097a86e 100644 --- a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts +++ b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts @@ -48,7 +48,7 @@ compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul"; aliases { - lcdif_24bit_pins_a = &pinctrl_disp0_3; + lcdif-24bit-pins-a = &pinctrl_disp0_3; mmc0 = &usdhc1; /delete-property/ mmc1; serial2 = &uart3; diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi index f678d18ad44a..02b5ba42cd59 100644 --- a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi @@ -53,10 +53,10 @@ i2c2 = &i2c1; i2c3 = &i2c3; i2c4 = &i2c4; - lcdif_23bit_pins_a = &pinctrl_disp0_1; - lcdif_24bit_pins_a = &pinctrl_disp0_2; + lcdif-23bit-pins-a = &pinctrl_disp0_1; + lcdif-24bit-pins-a = &pinctrl_disp0_2; pwm0 = &pwm5; - reg_can_xcvr = ®_can_xcvr; + reg-can-xcvr = ®_can_xcvr; serial2 = &uart5; serial4 = &uart3; spi0 = &ecspi2; diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 1241972b16ba..47a3453a4211 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -1,10 +1,6 @@ -/* - * Copyright 2015 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2015 Freescale Semiconductor, Inc. #include <dt-bindings/clock/imx6ul-clock.h> #include <dt-bindings/gpio/gpio.h> @@ -551,11 +547,8 @@ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - reg_3p0: regulator-3p0@20c8110 { - reg = <0x20c8110>; + reg_3p0: regulator-3p0 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd3p0"; regulator-min-microvolt = <2625000>; @@ -569,8 +562,7 @@ anatop-enable-bit = <0>; }; - reg_arm: regulator-vddcore@20c8140 { - reg = <0x20c8140>; + reg_arm: regulator-vddcore { compatible = "fsl,anatop-regulator"; regulator-name = "cpu"; regulator-min-microvolt = <725000>; @@ -587,8 +579,7 @@ anatop-max-voltage = <1450000>; }; - reg_soc: regulator-vddsoc@20c8140 { - reg = <0x20c8140>; + reg_soc: regulator-vddsoc { compatible = "fsl,anatop-regulator"; regulator-name = "vddsoc"; regulator-min-microvolt = <725000>; @@ -769,6 +760,36 @@ reg = <0x02100000 0x100000>; ranges; + crypto: caam@2140000 { + compatible = "fsl,imx6ul-caam", "fsl,sec-v4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x2140000 0x3c000>; + ranges = <0 0x2140000 0x3c000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_CAAM_IPG>, <&clks IMX6UL_CLK_CAAM_ACLK>, + <&clks IMX6UL_CLK_CAAM_MEM>; + clock-names = "ipg", "aclk", "mem"; + + sec_jr0: jr0@1000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr1: jr1@2000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr2: jr2@3000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + usbotg1: usb@2184000 { compatible = "fsl,imx6ul-usb", "fsl,imx27-usb"; reg = <0x02184000 0x200>; diff --git a/arch/arm/boot/dts/imx6ull-pinfunc.h b/arch/arm/boot/dts/imx6ull-pinfunc.h index 118202336691..fdc46bb09cc1 100644 --- a/arch/arm/boot/dts/imx6ull-pinfunc.h +++ b/arch/arm/boot/dts/imx6ull-pinfunc.h @@ -14,6 +14,14 @@ * The pin function ID is a tuple of * <mux_reg conf_reg input_reg mux_mode input_val> */ +#define MX6ULL_PAD_UART1_TX_DATA__UART5_DTE_RX 0x0084 0x0310 0x0644 0x9 0x4 +#define MX6ULL_PAD_UART1_RX_DATA__UART5_DCE_RX 0x0088 0x0314 0x0644 0x9 0x5 +#define MX6ULL_PAD_UART1_CTS_B__UART5_DCE_RTS 0x008C 0x0318 0x0640 0x9 0x3 +#define MX6ULL_PAD_UART1_RTS_B__UART5_DTE_RTS 0x0090 0x031C 0x0640 0x9 0x4 +#define MX6ULL_PAD_UART5_TX_DATA__UART5_DTE_RX 0x00BC 0x0348 0x0644 0x0 0x6 +#define MX6ULL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x00C0 0x034C 0x0644 0x0 0x7 +#define MX6ULL_PAD_ENET1_RX_EN__UART5_DCE_RTS 0x00CC 0x0358 0x0640 0x1 0x5 +#define MX6ULL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS 0x00D0 0x035C 0x0640 0x1 0x6 #define MX6ULL_PAD_ENET2_RX_DATA0__EPDC_SDDO08 0x00E4 0x0370 0x0000 0x9 0x0 #define MX6ULL_PAD_ENET2_RX_DATA1__EPDC_SDDO09 0x00E8 0x0374 0x0000 0x9 0x0 #define MX6ULL_PAD_ENET2_RX_EN__EPDC_SDDO10 0x00EC 0x0378 0x0000 0x9 0x0 @@ -47,6 +55,7 @@ #define MX6ULL_PAD_CSI_DATA00__ESAI_TX_HF_CLK 0x01E4 0x0470 0x0000 0x9 0x0 #define MX6ULL_PAD_CSI_DATA01__ESAI_RX_HF_CLK 0x01E8 0x0474 0x0000 0x9 0x0 #define MX6ULL_PAD_CSI_DATA02__ESAI_RX_FS 0x01EC 0x0478 0x0000 0x9 0x0 +#define MX6ULL_PAD_CSI_DATA02__UART5_DCE_RTS 0x01EC 0x0478 0x0640 0x8 0x7 #define MX6ULL_PAD_CSI_DATA03__ESAI_RX_CLK 0x01F0 0x047C 0x0000 0x9 0x0 #define MX6ULL_PAD_CSI_DATA04__ESAI_TX_FS 0x01F4 0x0480 0x0000 0x9 0x0 #define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK 0x01F8 0x0484 0x0000 0x9 0x0 diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi index 571ddd71cdba..ebc25c98e5e1 100644 --- a/arch/arm/boot/dts/imx6ull.dtsi +++ b/arch/arm/boot/dts/imx6ull.dtsi @@ -45,6 +45,8 @@ /* Delete UART8 in AIPS-1 (i.MX6UL specific) */ /delete-node/ &uart8; +/* Delete CAAM node in AIPS-2 (i.MX6UL specific) */ +/delete-node/ &crypto; / { soc { diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts index 7f645683f53b..8bf365d28cac 100644 --- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts +++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts @@ -33,7 +33,7 @@ }; &cpu0 { - arm-supply = <&sw1a_reg>; + cpu-supply = <&sw1a_reg>; }; &fec1 { diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts index 52167298984d..70c53e50b2fc 100644 --- a/arch/arm/boot/dts/imx7d-nitrogen7.dts +++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts @@ -49,8 +49,8 @@ compatible = "boundary,imx7d-nitrogen7", "fsl,imx7d"; aliases { - fb_lcd = &lcdif; - t_lcd = &t_lcd; + fb-lcd = &lcdif; + t-lcd = &t_lcd; }; memory@80000000 { @@ -144,7 +144,7 @@ }; &cpu0 { - arm-supply = <&sw1a_reg>; + cpu-supply = <&sw1a_reg>; }; &fec1 { diff --git a/arch/arm/boot/dts/imx7d-pinfunc.h b/arch/arm/boot/dts/imx7d-pinfunc.h index f2493bc63da4..aa9dbead4b8b 100644 --- a/arch/arm/boot/dts/imx7d-pinfunc.h +++ b/arch/arm/boot/dts/imx7d-pinfunc.h @@ -592,7 +592,7 @@ #define MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX 0x0130 0x03A0 0x06FC 0x0 0x2 #define MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX 0x0130 0x03A0 0x0000 0x0 0x0 #define MX7D_PAD_UART2_RX_DATA__I2C2_SCL 0x0130 0x03A0 0x05DC 0x1 0x0 -#define MX7D_PAD_UART2_RX_DATA__SAI3_RX_BCLK 0x0130 0x03A0 0x0000 0x2 0x0 +#define MX7D_PAD_UART2_RX_DATA__SAI3_RX_BCLK 0x0130 0x03A0 0x06C4 0x2 0x0 #define MX7D_PAD_UART2_RX_DATA__ECSPI1_SS3 0x0130 0x03A0 0x0000 0x3 0x0 #define MX7D_PAD_UART2_RX_DATA__ENET2_1588_EVENT1_IN 0x0130 0x03A0 0x0000 0x4 0x0 #define MX7D_PAD_UART2_RX_DATA__GPIO4_IO2 0x0130 0x03A0 0x0000 0x5 0x0 @@ -1112,13 +1112,13 @@ #define MX7D_PAD_ENET1_RGMII_TD3__GPIO7_IO9 0x0250 0x04C0 0x0000 0x5 0x0 #define MX7D_PAD_ENET1_RGMII_TD3__CAAM_RNG_OSC_OBS 0x0250 0x04C0 0x0000 0x7 0x0 #define MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x0254 0x04C4 0x0000 0x0 0x0 -#define MX7D_PAD_ENET1_RGMII_TX_CTL__SAI1_RX_SYNC 0x0254 0x04C4 0x0000 0x2 0x0 +#define MX7D_PAD_ENET1_RGMII_TX_CTL__SAI1_RX_SYNC 0x0254 0x04C4 0x06A4 0x2 0x1 #define MX7D_PAD_ENET1_RGMII_TX_CTL__GPT2_COMPARE1 0x0254 0x04C4 0x0000 0x3 0x0 #define MX7D_PAD_ENET1_RGMII_TX_CTL__EPDC_PWR_CTRL2 0x0254 0x04C4 0x0000 0x4 0x0 #define MX7D_PAD_ENET1_RGMII_TX_CTL__GPIO7_IO10 0x0254 0x04C4 0x0000 0x5 0x0 #define MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x0258 0x04C8 0x0000 0x0 0x0 #define MX7D_PAD_ENET1_RGMII_TXC__ENET1_TX_ER 0x0258 0x04C8 0x0000 0x1 0x0 -#define MX7D_PAD_ENET1_RGMII_TXC__SAI1_RX_BCLK 0x0258 0x04C8 0x0000 0x2 0x0 +#define MX7D_PAD_ENET1_RGMII_TXC__SAI1_RX_BCLK 0x0258 0x04C8 0x069C 0x2 0x1 #define MX7D_PAD_ENET1_RGMII_TXC__GPT2_COMPARE2 0x0258 0x04C8 0x0000 0x3 0x0 #define MX7D_PAD_ENET1_RGMII_TXC__EPDC_PWR_CTRL3 0x0258 0x04C8 0x0000 0x4 0x0 #define MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x0258 0x04C8 0x0000 0x5 0x0 diff --git a/arch/arm/boot/dts/imx7d-sdb-sht11.dts b/arch/arm/boot/dts/imx7d-sdb-sht11.dts index 64a20ed1713a..996555596d40 100644 --- a/arch/arm/boot/dts/imx7d-sdb-sht11.dts +++ b/arch/arm/boot/dts/imx7d-sdb-sht11.dts @@ -1,44 +1,6 @@ -/* - * Copyright (C) 2015 Freescale Semiconductor, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Copyright (C) 2015 Freescale Semiconductor, Inc. #include "imx7d-sdb.dts" diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 5d6a08be397f..940849163104 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -1,44 +1,6 @@ -/* - * Copyright (C) 2015 Freescale Semiconductor, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Copyright (C) 2015 Freescale Semiconductor, Inc. /dts-v1/; @@ -52,6 +14,24 @@ reg = <0x80000000 0x80000000>; }; + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + volume-up { + label = "Volume Up"; + gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + + volume-down { + label = "Volume Down"; + gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + spi4 { compatible = "spi-gpio"; pinctrl-names = "default"; @@ -161,7 +141,7 @@ }; &cpu0 { - arm-supply = <&sw1a_reg>; + cpu-supply = <&sw1a_reg>; }; &ecspi3 { @@ -519,6 +499,12 @@ >; }; + pinctrl_gpio_keys: gpio_keysgrp { + fsl,pins = < + MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x59 + MX7D_PAD_SD2_WP__GPIO5_IO10 0x59 + >; + }; pinctrl_hog: hoggrp { fsl,pins = < diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index d74dd7f19507..8d3d123d0a5c 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -1,45 +1,7 @@ -/* - * Copyright 2015 Freescale Semiconductor, Inc. - * Copyright 2016 Toradex AG - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Copyright 2015 Freescale Semiconductor, Inc. +// Copyright 2016 Toradex AG #include "imx7s.dtsi" #include <dt-bindings/reset/imx7-reset.h> @@ -47,12 +9,8 @@ / { cpus { cpu0: cpu@0 { - operating-points = < - /* KHz uV */ - 996000 1075000 - 792000 975000 - >; clock-frequency = <996000000>; + operating-points-v2 = <&cpu0_opp_table>; }; cpu1: cpu@1 { @@ -60,6 +18,25 @@ device_type = "cpu"; reg = <1>; clock-frequency = <996000000>; + operating-points-v2 = <&cpu0_opp_table>; + }; + }; + + cpu0_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-792000000 { + opp-hz = /bits/ 64 <792000000>; + opp-microvolt = <975000>; + clock-latency-ns = <150000>; + }; + + opp-996000000 { + opp-hz = /bits/ 64 <996000000>; + opp-microvolt = <1075000>; + clock-latency-ns = <150000>; + opp-suspend; }; }; diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts index 8a30b148534d..fa390da636de 100644 --- a/arch/arm/boot/dts/imx7s-warp.dts +++ b/arch/arm/boot/dts/imx7s-warp.dts @@ -113,10 +113,6 @@ assigned-clock-rates = <884736000>; }; -&cpu0 { - arm-supply = <&sw1a_reg>; -}; - &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 69436b9a404c..9ced589bfa96 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -1,45 +1,7 @@ -/* - * Copyright 2015 Freescale Semiconductor, Inc. - * Copyright 2016 Toradex AG - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Copyright 2015 Freescale Semiconductor, Inc. +// Copyright 2016 Toradex AG #include <dt-bindings/clock/imx7d-clock.h> #include <dt-bindings/power/imx7-power.h> @@ -173,6 +135,17 @@ }; }; + tempmon: tempmon { + compatible = "fsl,imx7d-tempmon"; + interrupt-parent = <&gpc>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + fsl,tempmon =<&anatop>; + nvmem-cells = <&tempmon_calib>, + <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>; + }; + timer { compatible = "arm,armv7-timer"; interrupt-parent = <&intc>; @@ -321,7 +294,7 @@ port { tpiu_in_port: endpoint { slave-mode; - remote-endpoint = <&replicator_out_port1>; + remote-endpoint = <&replicator_out_port0>; }; }; }; @@ -540,27 +513,14 @@ }; }; - tempmon: tempmon { - compatible = "fsl,imx7d-tempmon"; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - fsl,tempmon =<&anatop>; - nvmem-cells = <&tempmon_calib>, - <&tempmon_temp_grade>; - nvmem-cell-names = "calib", "temp_grade"; - clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>; - }; - anatop: anatop@30360000 { compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop", "syscon", "simple-bus"; reg = <0x30360000 0x10000>; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - reg_1p0d: regulator-vdd1p0d@30360210 { - reg = <0x30360210>; + reg_1p0d: regulator-vdd1p0d { compatible = "fsl,anatop-regulator"; regulator-name = "vdd1p0d"; regulator-min-microvolt = <800000>; @@ -573,6 +533,20 @@ anatop-max-voltage = <1200000>; anatop-enable-bit = <0>; }; + + reg_1p2: regulator-vdd1p2 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd1p2"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + anatop-reg-offset = <0x220>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <0x14>; + anatop-min-voltage = <1100000>; + anatop-max-voltage = <1300000>; + anatop-enable-bit = <0>; + }; }; snvs: snvs@30370000 { diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts index 6a4657799b99..154fdd7a7022 100644 --- a/arch/arm/boot/dts/keystone-k2g-evm.dts +++ b/arch/arm/boot/dts/keystone-k2g-evm.dts @@ -114,6 +114,20 @@ K2G_CORE_IOPAD(0x11f0) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0) /* uart2_txd.uart2_txd */ >; }; + + dcan0_pins: pinmux_dcan0_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x11fc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dcan0tx.dcan0tx */ + K2G_CORE_IOPAD(0x1200) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0) /* dcan0rx.dcan0rx */ + >; + }; + + dcan1_pins: pinmux_dcan1_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x1224) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE1) /* qspicsn2.dcan1tx */ + K2G_CORE_IOPAD(0x1228) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE1) /* qspicsn3.dcan1rx */ + >; + }; }; &uart0 { @@ -268,3 +282,15 @@ pinctrl-0 = <&uart2_pins>; status = "okay"; }; + +&dcan0 { + pinctrl-names = "default"; + pinctrl-0 = <&dcan0_pins>; + status = "okay"; +}; + +&dcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&dcan1_pins>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi index 6fa7bba3e801..3bb28c03ca74 100644 --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -35,6 +35,13 @@ reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* gpio_4 */ #phy-cells = <0>; }; + + /* fixed 26MHz oscillator */ + hfclk_26m: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <26000000>; + }; }; &gpmc { @@ -79,6 +86,8 @@ reg = <0x48>; interrupts = <7>; /* SYS_NIRQ cascaded to intc */ interrupt-parent = <&intc>; + clocks = <&hfclk_26m>; + clock-names = "fck"; twl_audio: audio { compatible = "ti,twl4030-audio"; codec { @@ -98,6 +107,25 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c3_pins>; clock-frequency = <400000>; + + touchscreen: tsc2004@48 { + compatible = "ti,tsc2004"; + reg = <0x48>; + vio-supply = <&vaux1>; + pinctrl-names = "default"; + pinctrl-0 = <&tsc2004_pins>; + interrupts-extended = <&gpio5 25 IRQ_TYPE_EDGE_RISING>; /* gpio 153 */ + + touchscreen-fuzz-x = <4>; + touchscreen-fuzz-y = <7>; + touchscreen-fuzz-pressure = <2>; + touchscreen-size-x = <4096>; + touchscreen-size-y = <4096>; + touchscreen-max-pressure = <2048>; + + ti,x-plate-ohms = <280>; + ti,esd-recovery-timeout-ms = <8000>; + }; }; &mmc3 { @@ -203,6 +231,12 @@ OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs6.gpio_57 */ >; }; + + tsc2004_pins: pinmux_tsc2004_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4) /* mcbsp4_dr.gpio_153 */ + >; + }; }; &omap3_pmx_wkup { diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi index 3e174e474d3d..7d2302e8706c 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi @@ -30,6 +30,13 @@ linux,default-trigger = "none"; }; }; + + /* fixed 26MHz oscillator */ + hfclk_26m: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <26000000>; + }; }; &gpmc { @@ -74,6 +81,9 @@ reg = <0x48>; interrupts = <7>; /* SYS_NIRQ cascaded to intc */ interrupt-parent = <&intc>; + clocks = <&hfclk_26m>; + clock-names = "fck"; + twl_audio: audio { compatible = "ti,twl4030-audio"; codec { diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index dcc9292d2ffa..d77dcf890cfc 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -57,7 +57,7 @@ #address-cells = <1>; #size-cells = <0>; - cpu@200 { + cpu0: cpu@200 { device_type = "cpu"; compatible = "arm,cortex-a9"; next-level-cache = <&L2>; @@ -66,7 +66,7 @@ resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>; }; - cpu@201 { + cpu1: cpu@201 { device_type = "cpu"; compatible = "arm,cortex-a9"; next-level-cache = <&L2>; @@ -75,7 +75,7 @@ resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>; }; - cpu@202 { + cpu2: cpu@202 { device_type = "cpu"; compatible = "arm,cortex-a9"; next-level-cache = <&L2>; @@ -84,7 +84,7 @@ resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>; }; - cpu@203 { + cpu3: cpu@203 { device_type = "cpu"; compatible = "arm,cortex-a9"; next-level-cache = <&L2>; @@ -94,6 +94,15 @@ }; }; + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + reserved-memory { #address-cells = <1>; #size-cells = <1>; @@ -272,6 +281,22 @@ function = "pwm_e"; }; }; + + uart_a1_pins: uart-a1 { + mux { + groups = "uart_tx_a1", + "uart_rx_a1"; + function = "uart_a"; + }; + }; + + uart_a1_cts_rts_pins: uart-a1-cts-rts { + mux { + groups = "uart_cts_a1", + "uart_rts_a1"; + function = "uart_a"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts index 3a5603d95b70..ef3177d3da3d 100644 --- a/arch/arm/boot/dts/meson8b-odroidc1.dts +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts @@ -103,10 +103,34 @@ }; }; -&uart_AO { +ðmac { status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; + + snps,reset-gpio = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 30000>; + + pinctrl-0 = <ð_rgmii_pins>; pinctrl-names = "default"; + + phy-mode = "rgmii"; + phy-handle = <ð_phy>; + amlogic,tx-delay-ns = <4>; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + /* Realtek RTL8211F (0x001cc916) */ + eth_phy: ethernet-phy@0 { + reg = <0>; + eee-broken-1000t; + interrupt-parent = <&gpio_intc>; + /* GPIOH_3 */ + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + }; + }; }; &gpio_ao { @@ -124,12 +148,10 @@ }; }; -&usb1_phy { - status = "okay"; -}; - -&usb1 { +&ir_receiver { status = "okay"; + pinctrl-0 = <&ir_recv_pins>; + pinctrl-names = "default"; }; &sdio { @@ -158,32 +180,16 @@ }; }; -ðmac { +&uart_AO { status = "okay"; - - snps,reset-gpio = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 30000>; - - pinctrl-0 = <ð_rgmii_pins>; + pinctrl-0 = <&uart_ao_a_pins>; pinctrl-names = "default"; +}; - phy-mode = "rgmii"; - phy-handle = <ð_phy>; - amlogic,tx-delay-ns = <4>; - - mdio { - compatible = "snps,dwmac-mdio"; - #address-cells = <1>; - #size-cells = <0>; +&usb1_phy { + status = "okay"; +}; - /* Realtek RTL8211F (0x001cc916) */ - eth_phy: ethernet-phy@0 { - reg = <0>; - eee-broken-1000t; - interrupt-parent = <&gpio_intc>; - /* GPIOH_3 */ - interrupts = <17 IRQ_TYPE_LEVEL_LOW>; - }; - }; +&usb1 { + status = "okay"; }; diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index 553b82174604..08f7f6be7254 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -55,7 +55,7 @@ #address-cells = <1>; #size-cells = <0>; - cpu@200 { + cpu0: cpu@200 { device_type = "cpu"; compatible = "arm,cortex-a5"; next-level-cache = <&L2>; @@ -64,7 +64,7 @@ resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>; }; - cpu@201 { + cpu1: cpu@201 { device_type = "cpu"; compatible = "arm,cortex-a5"; next-level-cache = <&L2>; @@ -73,7 +73,7 @@ resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>; }; - cpu@202 { + cpu2: cpu@202 { device_type = "cpu"; compatible = "arm,cortex-a5"; next-level-cache = <&L2>; @@ -82,7 +82,7 @@ resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>; }; - cpu@203 { + cpu3: cpu@203 { device_type = "cpu"; compatible = "arm,cortex-a5"; next-level-cache = <&L2>; @@ -92,6 +92,15 @@ }; }; + pmu { + compatible = "arm,cortex-a5-pmu"; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + reserved-memory { #address-cells = <1>; #size-cells = <1>; @@ -139,6 +148,13 @@ function = "uart_ao"; }; }; + + ir_recv_pins: remote { + mux { + groups = "remote_input"; + function = "remote"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts new file mode 100644 index 000000000000..f5853610b20b --- /dev/null +++ b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts @@ -0,0 +1,244 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Oleg Ivanov <balbes-150@yandex.ru> + * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com> + */ + +/dts-v1/; + +#include "meson8m2.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Tronsmart MXIII Plus"; + compatible = "tronsmart,mxiii-plus", "amlogic,meson8m2"; + + aliases { + ethernet0 = ðmac; + i2c0 = &i2c_AO; + serial0 = &uart_AO; + serial1 = &uart_A; + mmc0 = &sd_card_slot; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x40000000 0x80000000>; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1710000>; + + button-function { + label = "Function"; + linux,code = <KEY_FN>; + press-threshold-microvolt = <10000>; + }; + }; + + vcc_3v3: regulator-vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&cpu0 { + cpu-supply = <&vcck>; +}; + +ðmac { + status = "okay"; + + pinctrl-0 = <ð_rgmii_pins>; + pinctrl-names = "default"; + + phy-handle = <ð_phy0>; + phy-mode = "rgmii"; + + amlogic,tx-delay-ns = <4>; + + snps,reset-gpio = <&gpio GPIOH_4 0>; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-active-low; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + eth_phy0: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + }; + }; +}; + +&ir_receiver { + status = "okay"; + pinctrl-0 = <&ir_recv_pins>; + pinctrl-names = "default"; +}; + +&i2c_AO { + status = "okay"; + pinctrl-0 = <&i2c_ao_pins>; + pinctrl-names = "default"; + + pmic@32 { + compatible = "ricoh,rn5t618"; + reg = <0x32>; + system-power-controller; + + regulators { + vcck: DCDC1 { + regulator-name = "VCCK"; + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + DCDC2 { + regulator-name = "VDDAO"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + DCDC3 { + regulator-name = "VDD_DDR"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO1 { + regulator-name = "VDDIO_AO28"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + regulator-boot-on; + regulator-always-on; + }; + + vddio_ao1v8: LDO2 { + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO3 { + regulator-name = "VCC1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO4 { + regulator-name = "VCC2V8"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO5 { + regulator-name = "AVDD1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + LDORTC1 { + regulator-name = "VDD_LDO"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + regulator-boot-on; + regulator-always-on; + }; + + LDORTC2 { + regulator-name = "RTC_0V9"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao1v8>; +}; + +&sdio { + status = "okay"; + + pinctrl-0 = <&sd_b_pins>; + pinctrl-names = "default"; + + /* SD card */ + sd_card_slot: slot@1 { + compatible = "mmc-slot"; + reg = <1>; + status = "okay"; + + bus-width = <4>; + no-sdio; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; + cd-inverted; + + vmmc-supply = <&vcc_3v3>; + }; +}; + +/* connected to the Bluetooth module */ +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a1_pins>, <&uart_a1_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/meson8m2.dtsi b/arch/arm/boot/dts/meson8m2.dtsi new file mode 100644 index 000000000000..3e1f92273d7b --- /dev/null +++ b/arch/arm/boot/dts/meson8m2.dtsi @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>. + */ + +#include "meson8.dtsi" + +/ { + model = "Amlogic Meson8m2 SoC"; + compatible = "amlogic,meson8m2"; +}; /* end of / */ + +&clkc { + compatible = "amlogic,meson8m2-clkc", "amlogic,meson8-clkc"; +}; + +ðmac { + compatible = "amlogic,meson8m2-dwmac", "snps,dwmac"; + reg = <0xc9410000 0x10000 + 0xc1108140 0x8>; + clocks = <&clkc CLKID_ETH>, + <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL2>; + clock-names = "stmmaceth", "clkin0", "clkin1"; + resets = <&reset RESET_ETHERNET>; + reset-names = "stmmaceth"; +}; + +&pinctrl_aobus { + compatible = "amlogic,meson8m2-aobus-pinctrl", + "amlogic,meson8-aobus-pinctrl"; +}; + +&pinctrl_cbus { + compatible = "amlogic,meson8m2-cbus-pinctrl", + "amlogic,meson8-cbus-pinctrl"; + + eth_rgmii_pins: ethernet { + mux { + groups = "eth_tx_clk_50m", "eth_tx_en", + "eth_txd3", "eth_txd2", + "eth_txd1", "eth_txd0", + "eth_rx_clk_in", "eth_rx_dv", + "eth_rxd3", "eth_rxd2", + "eth_rxd1", "eth_rxd0", + "eth_mdio", "eth_mdc"; + function = "ethernet"; + }; + }; +}; + +&wdt { + compatible = "amlogic,meson8m2-wdt", "amlogic,meson8b-wdt"; +}; diff --git a/arch/arm/boot/dts/mt2701-evb.dts b/arch/arm/boot/dts/mt2701-evb.dts index 63af4b13a36f..be0edb3dae6c 100644 --- a/arch/arm/boot/dts/mt2701-evb.dts +++ b/arch/arm/boot/dts/mt2701-evb.dts @@ -1,15 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright (c) 2015 MediaTek Inc. * Author: Erin Lo <erin.lo@mediatek.com> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ /dts-v1/; diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi index 05557fce0f1d..180377e56ef4 100644 --- a/arch/arm/boot/dts/mt2701.dtsi +++ b/arch/arm/boot/dts/mt2701.dtsi @@ -1,15 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright (c) 2015 MediaTek Inc. * Author: Erin.Lo <erin.lo@mediatek.com> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <dt-bindings/clock/mt2701-clk.h> @@ -426,104 +419,96 @@ status = "disabled"; }; - afe: audio-controller@11220000 { - compatible = "mediatek,mt2701-audio"; - reg = <0 0x11220000 0 0x2000>, - <0 0x112a0000 0 0x20000>; - interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>; - interrupt-names = "afe", "asys"; - power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; - - clocks = <&infracfg CLK_INFRA_AUDIO>, - <&topckgen CLK_TOP_AUD_MUX1_SEL>, - <&topckgen CLK_TOP_AUD_MUX2_SEL>, - <&topckgen CLK_TOP_AUD_MUX1_DIV>, - <&topckgen CLK_TOP_AUD_MUX2_DIV>, - <&topckgen CLK_TOP_AUD_48K_TIMING>, - <&topckgen CLK_TOP_AUD_44K_TIMING>, - <&topckgen CLK_TOP_AUDPLL_MUX_SEL>, - <&topckgen CLK_TOP_APLL_SEL>, - <&topckgen CLK_TOP_AUD1PLL_98M>, - <&topckgen CLK_TOP_AUD2PLL_90M>, - <&topckgen CLK_TOP_HADDS2PLL_98M>, - <&topckgen CLK_TOP_HADDS2PLL_294M>, - <&topckgen CLK_TOP_AUDPLL>, - <&topckgen CLK_TOP_AUDPLL_D4>, - <&topckgen CLK_TOP_AUDPLL_D8>, - <&topckgen CLK_TOP_AUDPLL_D16>, - <&topckgen CLK_TOP_AUDPLL_D24>, - <&topckgen CLK_TOP_AUDINTBUS_SEL>, - <&clk26m>, - <&topckgen CLK_TOP_SYSPLL1_D4>, - <&topckgen CLK_TOP_AUD_K1_SRC_SEL>, - <&topckgen CLK_TOP_AUD_K2_SRC_SEL>, - <&topckgen CLK_TOP_AUD_K3_SRC_SEL>, - <&topckgen CLK_TOP_AUD_K4_SRC_SEL>, - <&topckgen CLK_TOP_AUD_K5_SRC_SEL>, - <&topckgen CLK_TOP_AUD_K6_SRC_SEL>, - <&topckgen CLK_TOP_AUD_K1_SRC_DIV>, - <&topckgen CLK_TOP_AUD_K2_SRC_DIV>, - <&topckgen CLK_TOP_AUD_K3_SRC_DIV>, - <&topckgen CLK_TOP_AUD_K4_SRC_DIV>, - <&topckgen CLK_TOP_AUD_K5_SRC_DIV>, - <&topckgen CLK_TOP_AUD_K6_SRC_DIV>, - <&topckgen CLK_TOP_AUD_I2S1_MCLK>, - <&topckgen CLK_TOP_AUD_I2S2_MCLK>, - <&topckgen CLK_TOP_AUD_I2S3_MCLK>, - <&topckgen CLK_TOP_AUD_I2S4_MCLK>, - <&topckgen CLK_TOP_AUD_I2S5_MCLK>, - <&topckgen CLK_TOP_AUD_I2S6_MCLK>, - <&topckgen CLK_TOP_ASM_M_SEL>, - <&topckgen CLK_TOP_ASM_H_SEL>, - <&topckgen CLK_TOP_UNIVPLL2_D4>, - <&topckgen CLK_TOP_UNIVPLL2_D2>, - <&topckgen CLK_TOP_SYSPLL_D5>; - - clock-names = "infra_sys_audio_clk", - "top_audio_mux1_sel", - "top_audio_mux2_sel", - "top_audio_mux1_div", - "top_audio_mux2_div", - "top_audio_48k_timing", - "top_audio_44k_timing", - "top_audpll_mux_sel", - "top_apll_sel", - "top_aud1_pll_98M", - "top_aud2_pll_90M", - "top_hadds2_pll_98M", - "top_hadds2_pll_294M", - "top_audpll", - "top_audpll_d4", - "top_audpll_d8", - "top_audpll_d16", - "top_audpll_d24", - "top_audintbus_sel", - "clk_26m", - "top_syspll1_d4", - "top_aud_k1_src_sel", - "top_aud_k2_src_sel", - "top_aud_k3_src_sel", - "top_aud_k4_src_sel", - "top_aud_k5_src_sel", - "top_aud_k6_src_sel", - "top_aud_k1_src_div", - "top_aud_k2_src_div", - "top_aud_k3_src_div", - "top_aud_k4_src_div", - "top_aud_k5_src_div", - "top_aud_k6_src_div", - "top_aud_i2s1_mclk", - "top_aud_i2s2_mclk", - "top_aud_i2s3_mclk", - "top_aud_i2s4_mclk", - "top_aud_i2s5_mclk", - "top_aud_i2s6_mclk", - "top_asm_m_sel", - "top_asm_h_sel", - "top_univpll2_d4", - "top_univpll2_d2", - "top_syspll_d5"; + audsys: clock-controller@11220000 { + compatible = "mediatek,mt2701-audsys", "syscon"; + reg = <0 0x11220000 0 0x2000>; + #clock-cells = <1>; + + afe: audio-controller { + compatible = "mediatek,mt2701-audio"; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "afe", "asys"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; + + clocks = <&infracfg CLK_INFRA_AUDIO>, + <&topckgen CLK_TOP_AUD_MUX1_SEL>, + <&topckgen CLK_TOP_AUD_MUX2_SEL>, + <&topckgen CLK_TOP_AUD_48K_TIMING>, + <&topckgen CLK_TOP_AUD_44K_TIMING>, + <&topckgen CLK_TOP_AUD_K1_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K2_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K3_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K4_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K1_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K2_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K3_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K4_SRC_DIV>, + <&topckgen CLK_TOP_AUD_I2S1_MCLK>, + <&topckgen CLK_TOP_AUD_I2S2_MCLK>, + <&topckgen CLK_TOP_AUD_I2S3_MCLK>, + <&topckgen CLK_TOP_AUD_I2S4_MCLK>, + <&audsys CLK_AUD_I2SO1>, + <&audsys CLK_AUD_I2SO2>, + <&audsys CLK_AUD_I2SO3>, + <&audsys CLK_AUD_I2SO4>, + <&audsys CLK_AUD_I2SIN1>, + <&audsys CLK_AUD_I2SIN2>, + <&audsys CLK_AUD_I2SIN3>, + <&audsys CLK_AUD_I2SIN4>, + <&audsys CLK_AUD_ASRCO1>, + <&audsys CLK_AUD_ASRCO2>, + <&audsys CLK_AUD_ASRCO3>, + <&audsys CLK_AUD_ASRCO4>, + <&audsys CLK_AUD_AFE>, + <&audsys CLK_AUD_AFE_CONN>, + <&audsys CLK_AUD_A1SYS>, + <&audsys CLK_AUD_A2SYS>, + <&audsys CLK_AUD_AFE_MRGIF>; + + clock-names = "infra_sys_audio_clk", + "top_audio_mux1_sel", + "top_audio_mux2_sel", + "top_audio_a1sys_hp", + "top_audio_a2sys_hp", + "i2s0_src_sel", + "i2s1_src_sel", + "i2s2_src_sel", + "i2s3_src_sel", + "i2s0_src_div", + "i2s1_src_div", + "i2s2_src_div", + "i2s3_src_div", + "i2s0_mclk_en", + "i2s1_mclk_en", + "i2s2_mclk_en", + "i2s3_mclk_en", + "i2so0_hop_ck", + "i2so1_hop_ck", + "i2so2_hop_ck", + "i2so3_hop_ck", + "i2si0_hop_ck", + "i2si1_hop_ck", + "i2si2_hop_ck", + "i2si3_hop_ck", + "asrc0_out_ck", + "asrc1_out_ck", + "asrc2_out_ck", + "asrc3_out_ck", + "audio_afe_pd", + "audio_afe_conn_pd", + "audio_a1sys_pd", + "audio_a2sys_pd", + "audio_mrgif_pd"; + + assigned-clocks = <&topckgen CLK_TOP_AUD_MUX1_SEL>, + <&topckgen CLK_TOP_AUD_MUX2_SEL>, + <&topckgen CLK_TOP_AUD_MUX1_DIV>, + <&topckgen CLK_TOP_AUD_MUX2_DIV>; + assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL_98M>, + <&topckgen CLK_TOP_AUD2PLL_90M>; + assigned-clock-rates = <0>, <0>, <49152000>, <45158400>; + }; }; mmsys: syscon@14000000 { diff --git a/arch/arm/boot/dts/mt6323.dtsi b/arch/arm/boot/dts/mt6323.dtsi index 7c783d6c750e..ba397407c1dd 100644 --- a/arch/arm/boot/dts/mt6323.dtsi +++ b/arch/arm/boot/dts/mt6323.dtsi @@ -1,15 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* - * Copyright (c) 2017 MediaTek Inc. + * Copyright (c) 2017-2018 MediaTek Inc. * Author: John Crispin <john@phrozen.org> * Sean Wang <sean.wang@mediatek.com> - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ &pwrap { @@ -20,6 +14,13 @@ interrupt-controller; #interrupt-cells = <2>; + mt6323_leds: leds { + compatible = "mediatek,mt6323-led"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + mt6323regulator: mt6323regulator{ compatible = "mediatek,mt6323-regulator"; diff --git a/arch/arm/boot/dts/mt6580-evbp1.dts b/arch/arm/boot/dts/mt6580-evbp1.dts index 17daeae6bbe8..ca137897ed60 100644 --- a/arch/arm/boot/dts/mt6580-evbp1.dts +++ b/arch/arm/boot/dts/mt6580-evbp1.dts @@ -1,15 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright (c) 2015 MediaTek Inc. * Author: Mars.C <mars.cheng@mediatek.com> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ /dts-v1/; diff --git a/arch/arm/boot/dts/mt6580.dtsi b/arch/arm/boot/dts/mt6580.dtsi index a349dba5ff79..2bdc5ed12fca 100644 --- a/arch/arm/boot/dts/mt6580.dtsi +++ b/arch/arm/boot/dts/mt6580.dtsi @@ -1,15 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright (c) 2015 MediaTek Inc. * Author: Mars.C <mars.cheng@mediatek.com> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <dt-bindings/interrupt-controller/irq.h> diff --git a/arch/arm/boot/dts/mt6589-aquaris5.dts b/arch/arm/boot/dts/mt6589-aquaris5.dts index 594a6f3bebda..7bbaa1279a26 100644 --- a/arch/arm/boot/dts/mt6589-aquaris5.dts +++ b/arch/arm/boot/dts/mt6589-aquaris5.dts @@ -1,16 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * Copyright (c) 2014 MundoReader S.L. * Author: Matthias Brugger <matthias.bgg@gmail.com> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ /dts-v1/; diff --git a/arch/arm/boot/dts/mt6589.dtsi b/arch/arm/boot/dts/mt6589.dtsi index 41df742d7891..28df8495686a 100644 --- a/arch/arm/boot/dts/mt6589.dtsi +++ b/arch/arm/boot/dts/mt6589.dtsi @@ -1,17 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * Copyright (c) 2014 MundoReader S.L. * Author: Matthias Brugger <matthias.bgg@gmail.com> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ +*/ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/arch/arm/boot/dts/mt6592-evb.dts b/arch/arm/boot/dts/mt6592-evb.dts index b57237e6394a..02849f6548e3 100644 --- a/arch/arm/boot/dts/mt6592-evb.dts +++ b/arch/arm/boot/dts/mt6592-evb.dts @@ -1,15 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright (c) 2014 MediaTek Inc. * Author: Howard Chen <ibanezchen@gmail.com> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ /dts-v1/; diff --git a/arch/arm/boot/dts/mt6592.dtsi b/arch/arm/boot/dts/mt6592.dtsi index c69201ffff72..8696ac891d60 100644 --- a/arch/arm/boot/dts/mt6592.dtsi +++ b/arch/arm/boot/dts/mt6592.dtsi @@ -1,15 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright (c) 2014 MediaTek Inc. * Author: Howard Chen <ibanezchen@gmail.com> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <dt-bindings/interrupt-controller/irq.h> diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index e10c03496524..d1eb123bc73b 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -1,16 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* - * Copyright (c) 2017 MediaTek Inc. + * Copyright (c) 2017-2018 MediaTek Inc. * Author: John Crispin <john@phrozen.org> * Sean Wang <sean.wang@mediatek.com> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <dt-bindings/interrupt-controller/irq.h> @@ -22,11 +15,12 @@ #include <dt-bindings/phy/phy.h> #include <dt-bindings/reset/mt2701-resets.h> #include <dt-bindings/thermal/thermal.h> -#include "skeleton64.dtsi" / { compatible = "mediatek,mt7623"; interrupt-parent = <&sysirq>; + #address-cells = <2>; + #size-cells = <2>; cpu_opp_table: opp-table { compatible = "operating-points-v2"; @@ -130,14 +124,14 @@ #clock-cells = <0>; }; - rtc32k: oscillator@1 { + rtc32k: oscillator-1 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32000>; clock-output-names = "rtc32k"; }; - clk26m: oscillator@0 { + clk26m: oscillator-0 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <26000000>; @@ -492,6 +486,18 @@ nvmem-cell-names = "calibration-data"; }; + btif: serial@1100c000 { + compatible = "mediatek,mt7623-btif", + "mediatek,mtk-btif"; + reg = <0 0x1100c000 0 0x1000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_BTIF>; + clock-names = "main"; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + nandc: nfi@1100d000 { compatible = "mediatek,mt7623-nfc", "mediatek,mt2701-nfc"; @@ -517,6 +523,18 @@ status = "disabled"; }; + nor_flash: spi@11014000 { + compatible = "mediatek,mt7623-nor", + "mediatek,mt8173-nor"; + reg = <0 0x11014000 0 0x1000>; + clocks = <&pericfg CLK_PERI_FLASH>, + <&topckgen CLK_TOP_FLASH_SEL>; + clock-names = "spi", "sf"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + spi1: spi@11016000 { compatible = "mediatek,mt7623-spi", "mediatek,mt2701-spi"; @@ -545,105 +563,99 @@ status = "disabled"; }; - afe: audio-controller@11220000 { - compatible = "mediatek,mt7623-audio", - "mediatek,mt2701-audio"; - reg = <0 0x11220000 0 0x2000>, - <0 0x112a0000 0 0x20000>; - interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>; - interrupt-names = "afe", "asys"; - power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; + audsys: clock-controller@11220000 { + compatible = "mediatek,mt7623-audsys", + "mediatek,mt2701-audsys", + "syscon"; + reg = <0 0x11220000 0 0x2000>; + #clock-cells = <1>; - clocks = <&infracfg CLK_INFRA_AUDIO>, - <&topckgen CLK_TOP_AUD_MUX1_SEL>, - <&topckgen CLK_TOP_AUD_MUX2_SEL>, - <&topckgen CLK_TOP_AUD_MUX1_DIV>, - <&topckgen CLK_TOP_AUD_MUX2_DIV>, - <&topckgen CLK_TOP_AUD_48K_TIMING>, - <&topckgen CLK_TOP_AUD_44K_TIMING>, - <&topckgen CLK_TOP_AUDPLL_MUX_SEL>, - <&topckgen CLK_TOP_APLL_SEL>, - <&topckgen CLK_TOP_AUD1PLL_98M>, - <&topckgen CLK_TOP_AUD2PLL_90M>, - <&topckgen CLK_TOP_HADDS2PLL_98M>, - <&topckgen CLK_TOP_HADDS2PLL_294M>, - <&topckgen CLK_TOP_AUDPLL>, - <&topckgen CLK_TOP_AUDPLL_D4>, - <&topckgen CLK_TOP_AUDPLL_D8>, - <&topckgen CLK_TOP_AUDPLL_D16>, - <&topckgen CLK_TOP_AUDPLL_D24>, - <&topckgen CLK_TOP_AUDINTBUS_SEL>, - <&clk26m>, - <&topckgen CLK_TOP_SYSPLL1_D4>, - <&topckgen CLK_TOP_AUD_K1_SRC_SEL>, - <&topckgen CLK_TOP_AUD_K2_SRC_SEL>, - <&topckgen CLK_TOP_AUD_K3_SRC_SEL>, - <&topckgen CLK_TOP_AUD_K4_SRC_SEL>, - <&topckgen CLK_TOP_AUD_K5_SRC_SEL>, - <&topckgen CLK_TOP_AUD_K6_SRC_SEL>, - <&topckgen CLK_TOP_AUD_K1_SRC_DIV>, - <&topckgen CLK_TOP_AUD_K2_SRC_DIV>, - <&topckgen CLK_TOP_AUD_K3_SRC_DIV>, - <&topckgen CLK_TOP_AUD_K4_SRC_DIV>, - <&topckgen CLK_TOP_AUD_K5_SRC_DIV>, - <&topckgen CLK_TOP_AUD_K6_SRC_DIV>, - <&topckgen CLK_TOP_AUD_I2S1_MCLK>, - <&topckgen CLK_TOP_AUD_I2S2_MCLK>, - <&topckgen CLK_TOP_AUD_I2S3_MCLK>, - <&topckgen CLK_TOP_AUD_I2S4_MCLK>, - <&topckgen CLK_TOP_AUD_I2S5_MCLK>, - <&topckgen CLK_TOP_AUD_I2S6_MCLK>, - <&topckgen CLK_TOP_ASM_M_SEL>, - <&topckgen CLK_TOP_ASM_H_SEL>, - <&topckgen CLK_TOP_UNIVPLL2_D4>, - <&topckgen CLK_TOP_UNIVPLL2_D2>, - <&topckgen CLK_TOP_SYSPLL_D5>; - - clock-names = "infra_sys_audio_clk", - "top_audio_mux1_sel", - "top_audio_mux2_sel", - "top_audio_mux1_div", - "top_audio_mux2_div", - "top_audio_48k_timing", - "top_audio_44k_timing", - "top_audpll_mux_sel", - "top_apll_sel", - "top_aud1_pll_98M", - "top_aud2_pll_90M", - "top_hadds2_pll_98M", - "top_hadds2_pll_294M", - "top_audpll", - "top_audpll_d4", - "top_audpll_d8", - "top_audpll_d16", - "top_audpll_d24", - "top_audintbus_sel", - "clk_26m", - "top_syspll1_d4", - "top_aud_k1_src_sel", - "top_aud_k2_src_sel", - "top_aud_k3_src_sel", - "top_aud_k4_src_sel", - "top_aud_k5_src_sel", - "top_aud_k6_src_sel", - "top_aud_k1_src_div", - "top_aud_k2_src_div", - "top_aud_k3_src_div", - "top_aud_k4_src_div", - "top_aud_k5_src_div", - "top_aud_k6_src_div", - "top_aud_i2s1_mclk", - "top_aud_i2s2_mclk", - "top_aud_i2s3_mclk", - "top_aud_i2s4_mclk", - "top_aud_i2s5_mclk", - "top_aud_i2s6_mclk", - "top_asm_m_sel", - "top_asm_h_sel", - "top_univpll2_d4", - "top_univpll2_d2", - "top_syspll_d5"; + afe: audio-controller { + compatible = "mediatek,mt7623-audio", + "mediatek,mt2701-audio"; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "afe", "asys"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; + + clocks = <&infracfg CLK_INFRA_AUDIO>, + <&topckgen CLK_TOP_AUD_MUX1_SEL>, + <&topckgen CLK_TOP_AUD_MUX2_SEL>, + <&topckgen CLK_TOP_AUD_48K_TIMING>, + <&topckgen CLK_TOP_AUD_44K_TIMING>, + <&topckgen CLK_TOP_AUD_K1_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K2_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K3_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K4_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K1_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K2_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K3_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K4_SRC_DIV>, + <&topckgen CLK_TOP_AUD_I2S1_MCLK>, + <&topckgen CLK_TOP_AUD_I2S2_MCLK>, + <&topckgen CLK_TOP_AUD_I2S3_MCLK>, + <&topckgen CLK_TOP_AUD_I2S4_MCLK>, + <&audsys CLK_AUD_I2SO1>, + <&audsys CLK_AUD_I2SO2>, + <&audsys CLK_AUD_I2SO3>, + <&audsys CLK_AUD_I2SO4>, + <&audsys CLK_AUD_I2SIN1>, + <&audsys CLK_AUD_I2SIN2>, + <&audsys CLK_AUD_I2SIN3>, + <&audsys CLK_AUD_I2SIN4>, + <&audsys CLK_AUD_ASRCO1>, + <&audsys CLK_AUD_ASRCO2>, + <&audsys CLK_AUD_ASRCO3>, + <&audsys CLK_AUD_ASRCO4>, + <&audsys CLK_AUD_AFE>, + <&audsys CLK_AUD_AFE_CONN>, + <&audsys CLK_AUD_A1SYS>, + <&audsys CLK_AUD_A2SYS>, + <&audsys CLK_AUD_AFE_MRGIF>; + + clock-names = "infra_sys_audio_clk", + "top_audio_mux1_sel", + "top_audio_mux2_sel", + "top_audio_a1sys_hp", + "top_audio_a2sys_hp", + "i2s0_src_sel", + "i2s1_src_sel", + "i2s2_src_sel", + "i2s3_src_sel", + "i2s0_src_div", + "i2s1_src_div", + "i2s2_src_div", + "i2s3_src_div", + "i2s0_mclk_en", + "i2s1_mclk_en", + "i2s2_mclk_en", + "i2s3_mclk_en", + "i2so0_hop_ck", + "i2so1_hop_ck", + "i2so2_hop_ck", + "i2so3_hop_ck", + "i2si0_hop_ck", + "i2si1_hop_ck", + "i2si2_hop_ck", + "i2si3_hop_ck", + "asrc0_out_ck", + "asrc1_out_ck", + "asrc2_out_ck", + "asrc3_out_ck", + "audio_afe_pd", + "audio_afe_conn_pd", + "audio_a1sys_pd", + "audio_a2sys_pd", + "audio_mrgif_pd"; + + assigned-clocks = <&topckgen CLK_TOP_AUD_MUX1_SEL>, + <&topckgen CLK_TOP_AUD_MUX2_SEL>, + <&topckgen CLK_TOP_AUD_MUX1_DIV>, + <&topckgen CLK_TOP_AUD_MUX2_DIV>; + assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL_98M>, + <&topckgen CLK_TOP_AUD2PLL_90M>; + assigned-clock-rates = <0>, <0>, <49152000>, <45158400>; + }; }; mmc0: mmc@11230000 { @@ -873,6 +885,16 @@ #reset-cells = <1>; }; + hsdma: dma-controller@1b007000 { + compatible = "mediatek,mt7623-hsdma"; + reg = <0 0x1b007000 0 0x1000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_LOW>; + clocks = <ðsys CLK_ETHSYS_HSDMA>; + clock-names = "hsdma"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>; + #dma-cells = <1>; + }; + eth: ethernet@1b100000 { compatible = "mediatek,mt7623-eth", "mediatek,mt2701-eth", @@ -913,3 +935,298 @@ status = "disabled"; }; }; + +&pio { + cir_pins_a:cir-default { + pins-cir { + pinmux = <MT7623_PIN_46_IR_FUNC_IR>; + bias-disable; + }; + }; + + i2c0_pins_a: i2c0-default { + pins-i2c0 { + pinmux = <MT7623_PIN_75_SDA0_FUNC_SDA0>, + <MT7623_PIN_76_SCL0_FUNC_SCL0>; + bias-disable; + }; + }; + + i2c1_pins_a: i2c1-default { + pin-i2c1 { + pinmux = <MT7623_PIN_57_SDA1_FUNC_SDA1>, + <MT7623_PIN_58_SCL1_FUNC_SCL1>; + bias-disable; + }; + }; + + i2c1_pins_b: i2c1-alt { + pin-i2c1 { + pinmux = <MT7623_PIN_242_URTS2_FUNC_SCL1>, + <MT7623_PIN_243_UCTS2_FUNC_SDA1>; + bias-disable; + }; + }; + + i2c2_pins_a: i2c2-default { + pin-i2c2 { + pinmux = <MT7623_PIN_77_SDA2_FUNC_SDA2>, + <MT7623_PIN_78_SCL2_FUNC_SCL2>; + bias-disable; + }; + }; + + i2c2_pins_b: i2c2-alt { + pin-i2c2 { + pinmux = <MT7623_PIN_122_GPIO122_FUNC_SDA2>, + <MT7623_PIN_123_HTPLG_FUNC_SCL2>; + bias-disable; + }; + }; + + i2s0_pins_a: i2s0-default { + pin-i2s0 { + pinmux = <MT7623_PIN_49_I2S0_DATA_FUNC_I2S0_DATA>, + <MT7623_PIN_72_I2S0_DATA_IN_FUNC_I2S0_DATA_IN>, + <MT7623_PIN_73_I2S0_LRCK_FUNC_I2S0_LRCK>, + <MT7623_PIN_74_I2S0_BCK_FUNC_I2S0_BCK>, + <MT7623_PIN_126_I2S0_MCLK_FUNC_I2S0_MCLK>; + drive-strength = <MTK_DRIVE_12mA>; + bias-pull-down; + }; + }; + + i2s1_pins_a: i2s1-default { + pin-i2s1 { + pinmux = <MT7623_PIN_33_I2S1_DATA_FUNC_I2S1_DATA>, + <MT7623_PIN_34_I2S1_DATA_IN_FUNC_I2S1_DATA_IN>, + <MT7623_PIN_35_I2S1_BCK_FUNC_I2S1_BCK>, + <MT7623_PIN_36_I2S1_LRCK_FUNC_I2S1_LRCK>, + <MT7623_PIN_37_I2S1_MCLK_FUNC_I2S1_MCLK>; + drive-strength = <MTK_DRIVE_12mA>; + bias-pull-down; + }; + }; + + key_pins_a: keys-alt { + pins-keys { + pinmux = <MT7623_PIN_256_GPIO256_FUNC_GPIO256>, + <MT7623_PIN_257_GPIO257_FUNC_GPIO257> ; + input-enable; + }; + }; + + led_pins_a: leds-alt { + pins-leds { + pinmux = <MT7623_PIN_239_EXT_SDIO0_FUNC_GPIO239>, + <MT7623_PIN_240_EXT_XCS_FUNC_GPIO240>, + <MT7623_PIN_241_EXT_SCK_FUNC_GPIO241>; + }; + }; + + mmc0_pins_default: mmc0default { + pins-cmd-dat { + pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>, + <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>, + <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>, + <MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>, + <MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>, + <MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>, + <MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>, + <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>, + <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>; + input-enable; + bias-pull-up; + }; + + pins-clk { + pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>; + bias-pull-down; + }; + + pins-rst { + pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>; + bias-pull-up; + }; + }; + + mmc0_pins_uhs: mmc0 { + pins-cmd-dat { + pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>, + <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>, + <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>, + <MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>, + <MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>, + <MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>, + <MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>, + <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>, + <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_2mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-clk { + pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>; + drive-strength = <MTK_DRIVE_2mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-rst { + pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>; + bias-pull-up; + }; + }; + + mmc1_pins_default: mmc1default { + pins-cmd-dat { + pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>, + <MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>, + <MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>, + <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>, + <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-clk { + pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>; + bias-pull-down; + drive-strength = <MTK_DRIVE_4mA>; + }; + + pins-wp { + pinmux = <MT7623_PIN_29_EINT7_FUNC_MSDC1_WP>; + input-enable; + bias-pull-up; + }; + + pins-insert { + pinmux = <MT7623_PIN_261_MSDC1_INS_FUNC_GPIO261>; + bias-pull-up; + }; + }; + + mmc1_pins_uhs: mmc1 { + pins-cmd-dat { + pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>, + <MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>, + <MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>, + <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>, + <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-clk { + pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + }; + + nand_pins_default: nanddefault { + pins-ale { + pinmux = <MT7623_PIN_116_MSDC0_CMD_FUNC_NALE>; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-dat { + pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_NLD7>, + <MT7623_PIN_112_MSDC0_DAT6_FUNC_NLD6>, + <MT7623_PIN_114_MSDC0_DAT4_FUNC_NLD4>, + <MT7623_PIN_118_MSDC0_DAT3_FUNC_NLD3>, + <MT7623_PIN_121_MSDC0_DAT0_FUNC_NLD0>, + <MT7623_PIN_120_MSDC0_DAT1_FUNC_NLD1>, + <MT7623_PIN_113_MSDC0_DAT5_FUNC_NLD5>, + <MT7623_PIN_115_MSDC0_RSTB_FUNC_NLD8>, + <MT7623_PIN_119_MSDC0_DAT2_FUNC_NLD2>; + input-enable; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up; + }; + + pins-we { + pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_NWEB>; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; + }; + }; + + pcie_default: pcie_pin_default { + pins_cmd_dat { + pinmux = <MT7623_PIN_208_AUD_EXT_CK1_FUNC_PCIE0_PERST_N>, + <MT7623_PIN_209_AUD_EXT_CK2_FUNC_PCIE1_PERST_N>; + bias-disable; + }; + }; + + pwm_pins_a: pwm-default { + pins-pwm { + pinmux = <MT7623_PIN_203_PWM0_FUNC_PWM0>, + <MT7623_PIN_204_PWM1_FUNC_PWM1>, + <MT7623_PIN_205_PWM2_FUNC_PWM2>, + <MT7623_PIN_206_PWM3_FUNC_PWM3>, + <MT7623_PIN_207_PWM4_FUNC_PWM4>; + }; + }; + + spi0_pins_a: spi0-default { + pins-spi { + pinmux = <MT7623_PIN_53_SPI0_CSN_FUNC_SPI0_CS>, + <MT7623_PIN_54_SPI0_CK_FUNC_SPI0_CK>, + <MT7623_PIN_55_SPI0_MI_FUNC_SPI0_MI>, + <MT7623_PIN_56_SPI0_MO_FUNC_SPI0_MO>; + bias-disable; + }; + }; + + spi1_pins_a: spi1-default { + pins-spi { + pinmux = <MT7623_PIN_7_SPI1_CSN_FUNC_SPI1_CS>, + <MT7623_PIN_199_SPI1_CK_FUNC_SPI1_CK>, + <MT7623_PIN_8_SPI1_MI_FUNC_SPI1_MI>, + <MT7623_PIN_9_SPI1_MO_FUNC_SPI1_MO>; + }; + }; + + spi2_pins_a: spi2-default { + pins-spi { + pinmux = <MT7623_PIN_101_SPI2_CSN_FUNC_SPI2_CS>, + <MT7623_PIN_104_SPI2_CK_FUNC_SPI2_CK>, + <MT7623_PIN_102_SPI2_MI_FUNC_SPI2_MI>, + <MT7623_PIN_103_SPI2_MO_FUNC_SPI2_MO>; + }; + }; + + uart0_pins_a: uart0-default { + pins-dat { + pinmux = <MT7623_PIN_79_URXD0_FUNC_URXD0>, + <MT7623_PIN_80_UTXD0_FUNC_UTXD0>; + }; + }; + + uart1_pins_a: uart1-default { + pins-dat { + pinmux = <MT7623_PIN_81_URXD1_FUNC_URXD1>, + <MT7623_PIN_82_UTXD1_FUNC_UTXD1>; + }; + }; + + uart2_pins_a: uart2-default { + pins-dat { + pinmux = <MT7623_PIN_14_GPIO14_FUNC_URXD2>, + <MT7623_PIN_15_GPIO15_FUNC_UTXD2>; + }; + }; + + uart2_pins_b: uart2-alt { + pins-dat { + pinmux = <MT7623_PIN_200_URXD2_FUNC_URXD2>, + <MT7623_PIN_201_UTXD2_FUNC_UTXD2>; + }; + }; +}; diff --git a/arch/arm/boot/dts/mt7623a-rfb-emmc.dts b/arch/arm/boot/dts/mt7623a-rfb-emmc.dts new file mode 100644 index 000000000000..13c86936d1c8 --- /dev/null +++ b/arch/arm/boot/dts/mt7623a-rfb-emmc.dts @@ -0,0 +1,291 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2017-2018 MediaTek Inc. + * Author: Sean Wang <sean.wang@mediatek.com> + * + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include "mt7623a.dtsi" +#include "mt6323.dtsi" + +/ { + model = "MediaTek MT7623A with eMMC reference board"; + compatible = "mediatek,mt7623a-rfb-emmc", "mediatek,mt7623"; + + aliases { + serial2 = &uart2; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + cpus { + cpu@0 { + proc-supply = <&mt6323_vproc_reg>; + }; + + cpu@1 { + proc-supply = <&mt6323_vproc_reg>; + }; + + cpu@2 { + proc-supply = <&mt6323_vproc_reg>; + }; + + cpu@3 { + proc-supply = <&mt6323_vproc_reg>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&key_pins_a>; + + factory { + label = "factory"; + linux,code = <BTN_0>; + gpios = <&pio 256 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "wps"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&pio 257 GPIO_ACTIVE_HIGH>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0 0x80000000 0 0x20000000>; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "fixed-5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; + + sound { + compatible = "mediatek,mt2701-wm8960-machine"; + mediatek,platform = <&afe>; + audio-routing = + "Headphone", "HP_L", + "Headphone", "HP_R", + "LINPUT1", "AMIC", + "RINPUT1", "AMIC"; + mediatek,audio-codec = <&wm8960>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_pins_a>; + }; +}; + +&btif { + status = "okay"; +}; + +&crypto { + status = "okay"; +}; + +ð { + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "trgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + + mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + switch@0 { + compatible = "mediatek,mt7530"; + reg = <0>; + mediatek,mcm; + resets = <ðsys MT2701_ETHSYS_MCM_RST>; + reset-names = "mcm"; + core-supply = <&mt6323_vpa_reg>; + io-supply = <&mt6323_vemc3v3_reg>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan0"; + }; + + port@1 { + reg = <1>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan3"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "trgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_b>; + status = "okay"; + + wm8960: wm8960@1a { + compatible = "wlf,wm8960"; + reg = <0x1a>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_b>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_pins_default>; + pinctrl-1 = <&mmc0_pins_uhs>; + status = "okay"; + bus-width = <8>; + max-frequency = <50000000>; + cap-mmc-highspeed; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + non-removable; +}; + +&mmc1 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_uhs>; + status = "okay"; + bus-width = <4>; + max-frequency = <50000000>; + cap-sd-highspeed; + cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_3p3v>; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_default>; + status = "okay"; + + pcie@0,0 { + status = "okay"; + }; + + pcie@1,0 { + status = "okay"; + }; +}; + +&pcie0_phy { + status = "okay"; +}; + +&pcie1_phy { + status = "okay"; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pins_a>; + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins_a>; + status = "okay"; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins_a>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins_b>; + status = "okay"; +}; + +&usb1 { + vusb33-supply = <®_3p3v>; + vbus-supply = <®_5v>; + status = "okay"; +}; + +&u3phy1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/mt7623a-rfb-nand.dts b/arch/arm/boot/dts/mt7623a-rfb-nand.dts new file mode 100644 index 000000000000..88d8f0b2f4c2 --- /dev/null +++ b/arch/arm/boot/dts/mt7623a-rfb-nand.dts @@ -0,0 +1,337 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2017-2018 MediaTek Inc. + * Author: Sean Wang <sean.wang@mediatek.com> + * + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include "mt7623a.dtsi" +#include "mt6323.dtsi" + +/ { + model = "MediaTek MT7623A with NAND reference board"; + compatible = "mediatek,mt7623a-rfb-nand", "mediatek,mt7623"; + + aliases { + serial2 = &uart2; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + cpus { + cpu@0 { + proc-supply = <&mt6323_vproc_reg>; + }; + + cpu@1 { + proc-supply = <&mt6323_vproc_reg>; + }; + + cpu@2 { + proc-supply = <&mt6323_vproc_reg>; + }; + + cpu@3 { + proc-supply = <&mt6323_vproc_reg>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&key_pins_a>; + + factory { + label = "factory"; + linux,code = <BTN_0>; + gpios = <&pio 256 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "wps"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&pio 257 GPIO_ACTIVE_HIGH>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0 0x80000000 0 0x20000000>; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "fixed-5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; + + sound { + compatible = "mediatek,mt2701-wm8960-machine"; + mediatek,platform = <&afe>; + audio-routing = + "Headphone", "HP_L", + "Headphone", "HP_R", + "LINPUT1", "AMIC", + "RINPUT1", "AMIC"; + mediatek,audio-codec = <&wm8960>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_pins_a>; + }; +}; + +&bch { + status = "okay"; +}; + +&btif { + status = "okay"; +}; + +&crypto { + status = "okay"; +}; + +ð { + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "trgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + + mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + switch@0 { + compatible = "mediatek,mt7530"; + reg = <0>; + mediatek,mcm; + resets = <ðsys MT2701_ETHSYS_MCM_RST>; + reset-names = "mcm"; + core-supply = <&mt6323_vpa_reg>; + io-supply = <&mt6323_vemc3v3_reg>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan0"; + }; + + port@1 { + reg = <1>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan3"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "trgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_b>; + status = "okay"; + + wm8960: wm8960@1a { + compatible = "wlf,wm8960"; + reg = <0x1a>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_b>; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_uhs>; + status = "okay"; + bus-width = <4>; + max-frequency = <50000000>; + cap-sd-highspeed; + cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_3p3v>; +}; + +&nandc { + pinctrl-names = "default"; + pinctrl-0 = <&nand_pins_default>; + status = "okay"; + + nand@0 { + reg = <0>; + spare_per_sector = <64>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <12>; + nand-ecc-step-size = <1024>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "preloader"; + reg = <0x0 0x40000>; + }; + + partition@40000 { + label = "uboot"; + reg = <0x40000 0x80000>; + }; + + partition@c0000 { + label = "uboot-env"; + reg = <0xC0000 0x40000>; + }; + + partition@140000 { + label = "bootimg"; + reg = <0x140000 0x2000000>; + }; + + partition@2140000 { + label = "recovery"; + reg = <0x2140000 0x2000000>; + }; + + partition@4140000 { + label = "rootfs"; + reg = <0x4140000 0x1000000>; + }; + + partition@5140000 { + label = "usrdata"; + reg = <0x5140000 0x1000000>; + }; + }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_default>; + status = "okay"; + + pcie@0,0 { + status = "okay"; + }; + + pcie@1,0 { + status = "okay"; + }; +}; + +&pcie0_phy { + status = "okay"; +}; + +&pcie1_phy { + status = "okay"; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pins_a>; + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins_a>; + status = "okay"; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins_a>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins_b>; + status = "okay"; +}; + +&usb1 { + vusb33-supply = <®_3p3v>; + vbus-supply = <®_5v>; + status = "okay"; +}; + +&u3phy1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/mt7623a.dtsi b/arch/arm/boot/dts/mt7623a.dtsi new file mode 100644 index 000000000000..0735a1fb8ad9 --- /dev/null +++ b/arch/arm/boot/dts/mt7623a.dtsi @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2017-2018 MediaTek Inc. + * Author: Sean Wang <sean.wang@mediatek.com> + * + */ + +/dts-v1/; +#include <dt-bindings/power/mt7623a-power.h> +#include "mt7623.dtsi" + +&afe { + power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>; +}; + +&crypto { + power-domains = <&scpsys MT7623A_POWER_DOMAIN_ETH>; +}; + +ð { + power-domains = <&scpsys MT7623A_POWER_DOMAIN_ETH>; +}; + +&nandc { + power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>; +}; + +&pcie { + power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>; +}; + +&scpsys { + compatible = "mediatek,mt7623a-scpsys"; + clocks = <&topckgen CLK_TOP_ETHIF_SEL>; + clock-names = "ethif"; +}; + +&usb1 { + power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>; +}; + +&usb2 { + power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>; +}; diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts index bbf56f855e46..531d905d924f 100644 --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts @@ -1,5 +1,5 @@ /* - * Copyright 2017 Sean Wang <sean.wang@mediatek.com> + * Copyright 2017-2018 Sean Wang <sean.wang@mediatek.com> * * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ @@ -109,10 +109,15 @@ }; memory@80000000 { - reg = <0 0x80000000 0 0x40000000>; + device_type = "memory"; + reg = <0 0x80000000 0 0x80000000>; }; }; +&btif { + status = "okay"; +}; + &cir { pinctrl-names = "default"; pinctrl-0 = <&cir_pins_a>; @@ -144,8 +149,6 @@ switch@0 { compatible = "mediatek,mt7530"; - #address-cells = <1>; - #size-cells = <0>; reg = <0>; reset-gpios = <&pio 33 0>; core-supply = <&mt6323_vpa_reg>; @@ -154,7 +157,6 @@ ports { #address-cells = <1>; #size-cells = <0>; - reg = <0>; port@0 { reg = <0>; @@ -235,6 +237,28 @@ vqmmc-supply = <®_3p3v>; }; +&mt6323_leds { + status = "okay"; + + led@0 { + reg = <0>; + label = "bpi-r2:isink:green"; + default-state = "off"; + }; + + led@1 { + reg = <1>; + label = "bpi-r2:isink:red"; + default-state = "off"; + }; + + led@2 { + reg = <2>; + label = "bpi-r2:isink:blue"; + default-state = "off"; + }; +}; + &pcie { pinctrl-names = "default"; pinctrl-0 = <&pcie_default>; @@ -257,257 +281,12 @@ status = "okay"; }; -&pio { - cir_pins_a:cir@0 { - pins-cir { - pinmux = <MT7623_PIN_46_IR_FUNC_IR>; - bias-disable; - }; - }; - - i2c0_pins_a: i2c@0 { - pins-i2c0 { - pinmux = <MT7623_PIN_75_SDA0_FUNC_SDA0>, - <MT7623_PIN_76_SCL0_FUNC_SCL0>; - bias-disable; - }; - }; - - i2c1_pins_a: i2c@1 { - pin-i2c1 { - pinmux = <MT7623_PIN_57_SDA1_FUNC_SDA1>, - <MT7623_PIN_58_SCL1_FUNC_SCL1>; - bias-disable; - }; - }; - - i2s0_pins_a: i2s@0 { - pin-i2s0 { - pinmux = <MT7623_PIN_49_I2S0_DATA_FUNC_I2S0_DATA>, - <MT7623_PIN_72_I2S0_DATA_IN_FUNC_I2S0_DATA_IN>, - <MT7623_PIN_73_I2S0_LRCK_FUNC_I2S0_LRCK>, - <MT7623_PIN_74_I2S0_BCK_FUNC_I2S0_BCK>, - <MT7623_PIN_126_I2S0_MCLK_FUNC_I2S0_MCLK>; - drive-strength = <MTK_DRIVE_12mA>; - bias-pull-down; - }; - }; - - i2s1_pins_a: i2s@1 { - pin-i2s1 { - pinmux = <MT7623_PIN_33_I2S1_DATA_FUNC_I2S1_DATA>, - <MT7623_PIN_34_I2S1_DATA_IN_FUNC_I2S1_DATA_IN>, - <MT7623_PIN_35_I2S1_BCK_FUNC_I2S1_BCK>, - <MT7623_PIN_36_I2S1_LRCK_FUNC_I2S1_LRCK>, - <MT7623_PIN_37_I2S1_MCLK_FUNC_I2S1_MCLK>; - drive-strength = <MTK_DRIVE_12mA>; - bias-pull-down; - }; - }; - - key_pins_a: keys@0 { - pins-keys { - pinmux = <MT7623_PIN_256_GPIO256_FUNC_GPIO256>, - <MT7623_PIN_257_GPIO257_FUNC_GPIO257> ; - input-enable; - }; - }; - - led_pins_a: leds@0 { - pins-leds { - pinmux = <MT7623_PIN_239_EXT_SDIO0_FUNC_GPIO239>, - <MT7623_PIN_240_EXT_XCS_FUNC_GPIO240>, - <MT7623_PIN_241_EXT_SCK_FUNC_GPIO241>; - }; - }; - - mmc0_pins_default: mmc0default { - pins-cmd-dat { - pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>, - <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>, - <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>, - <MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>, - <MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>, - <MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>, - <MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>, - <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>, - <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>; - input-enable; - bias-pull-up; - }; - - pins-clk { - pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>; - bias-pull-down; - }; - - pins-rst { - pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>; - bias-pull-up; - }; - }; - - mmc0_pins_uhs: mmc0 { - pins-cmd-dat { - pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>, - <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>, - <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>, - <MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>, - <MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>, - <MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>, - <MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>, - <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>, - <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>; - input-enable; - drive-strength = <MTK_DRIVE_2mA>; - bias-pull-up = <MTK_PUPD_SET_R1R0_01>; - }; - - pins-clk { - pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>; - drive-strength = <MTK_DRIVE_2mA>; - bias-pull-down = <MTK_PUPD_SET_R1R0_01>; - }; - - pins-rst { - pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>; - bias-pull-up; - }; - }; - - mmc1_pins_default: mmc1default { - pins-cmd-dat { - pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>, - <MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>, - <MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>, - <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>, - <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>; - input-enable; - drive-strength = <MTK_DRIVE_4mA>; - bias-pull-up = <MTK_PUPD_SET_R1R0_10>; - }; - - pins-clk { - pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>; - bias-pull-down; - drive-strength = <MTK_DRIVE_4mA>; - }; - - pins-wp { - pinmux = <MT7623_PIN_29_EINT7_FUNC_MSDC1_WP>; - input-enable; - bias-pull-up; - }; - - pins-insert { - pinmux = <MT7623_PIN_261_MSDC1_INS_FUNC_GPIO261>; - bias-pull-up; - }; - }; - - mmc1_pins_uhs: mmc1 { - pins-cmd-dat { - pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>, - <MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>, - <MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>, - <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>, - <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>; - input-enable; - drive-strength = <MTK_DRIVE_4mA>; - bias-pull-up = <MTK_PUPD_SET_R1R0_10>; - }; - - pins-clk { - pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>; - drive-strength = <MTK_DRIVE_4mA>; - bias-pull-down = <MTK_PUPD_SET_R1R0_10>; - }; - }; - - pcie_default: pcie_pin_default { - pins_cmd_dat { - pinmux = <MT7623_PIN_208_AUD_EXT_CK1_FUNC_PCIE0_PERST_N>, - <MT7623_PIN_209_AUD_EXT_CK2_FUNC_PCIE1_PERST_N>; - bias-disable; - }; - }; - - pwm_pins_a: pwm@0 { - pins-pwm { - pinmux = <MT7623_PIN_203_PWM0_FUNC_PWM0>, - <MT7623_PIN_204_PWM1_FUNC_PWM1>, - <MT7623_PIN_205_PWM2_FUNC_PWM2>, - <MT7623_PIN_206_PWM3_FUNC_PWM3>, - <MT7623_PIN_207_PWM4_FUNC_PWM4>; - }; - }; - - spi0_pins_a: spi@0 { - pins-spi { - pinmux = <MT7623_PIN_53_SPI0_CSN_FUNC_SPI0_CS>, - <MT7623_PIN_54_SPI0_CK_FUNC_SPI0_CK>, - <MT7623_PIN_55_SPI0_MI_FUNC_SPI0_MI>, - <MT7623_PIN_56_SPI0_MO_FUNC_SPI0_MO>; - bias-disable; - }; - }; - - uart0_pins_a: uart@0 { - pins-dat { - pinmux = <MT7623_PIN_79_URXD0_FUNC_URXD0>, - <MT7623_PIN_80_UTXD0_FUNC_UTXD0>; - }; - }; - - uart1_pins_a: uart@1 { - pins-dat { - pinmux = <MT7623_PIN_81_URXD1_FUNC_URXD1>, - <MT7623_PIN_82_UTXD1_FUNC_UTXD1>; - }; - }; - - uart2_pins_a: uart@2 { - pins-dat { - pinmux = <MT7623_PIN_14_GPIO14_FUNC_URXD2>, - <MT7623_PIN_15_GPIO15_FUNC_UTXD2>; - }; - }; -}; - &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm_pins_a>; status = "okay"; }; -&pwrap { - mt6323 { - mt6323led: led { - compatible = "mediatek,mt6323-led"; - #address-cells = <1>; - #size-cells = <0>; - - led@0 { - reg = <0>; - label = "bpi-r2:isink:green"; - default-state = "off"; - }; - - led@1 { - reg = <1>; - label = "bpi-r2:isink:red"; - default-state = "off"; - }; - - led@2 { - reg = <2>; - label = "bpi-r2:isink:blue"; - default-state = "off"; - }; - }; - }; -}; - &spi0 { pinctrl-names = "default"; pinctrl-0 = <&spi0_pins_a>; diff --git a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts new file mode 100644 index 000000000000..b7606130ade9 --- /dev/null +++ b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts @@ -0,0 +1,326 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2017-2018 MediaTek Inc. + * Author: Sean Wang <sean.wang@mediatek.com> + * + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include "mt7623.dtsi" +#include "mt6323.dtsi" + +/ { + model = "MediaTek MT7623N with eMMC reference board"; + compatible = "mediatek,mt7623n-rfb-emmc", "mediatek,mt7623"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + cpus { + cpu@0 { + proc-supply = <&mt6323_vproc_reg>; + }; + + cpu@1 { + proc-supply = <&mt6323_vproc_reg>; + }; + + cpu@2 { + proc-supply = <&mt6323_vproc_reg>; + }; + + cpu@3 { + proc-supply = <&mt6323_vproc_reg>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&key_pins_a>; + + factory { + label = "factory"; + linux,code = <BTN_0>; + gpios = <&pio 256 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "wps"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&pio 257 GPIO_ACTIVE_HIGH>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0 0x80000000 0 0x40000000>; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "fixed-5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; + + sound { + compatible = "mediatek,mt2701-wm8960-machine"; + mediatek,platform = <&afe>; + audio-routing = + "Headphone", "HP_L", + "Headphone", "HP_R", + "LINPUT1", "AMIC", + "RINPUT1", "AMIC"; + mediatek,audio-codec = <&wm8960>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_pins_a>; + }; +}; + +&btif { + status = "okay"; +}; + +&cir { + pinctrl-names = "default"; + pinctrl-0 = <&cir_pins_a>; + status = "okay"; +}; + +&crypto { + status = "okay"; +}; + +ð { + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "trgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + + mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-handle = <&phy5>; + }; + + mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + phy5: ethernet-phy@5 { + reg = <5>; + phy-mode = "rgmii-rxid"; + }; + + switch@0 { + compatible = "mediatek,mt7530"; + reg = <0>; + reset-gpios = <&pio 33 0>; + core-supply = <&mt6323_vpa_reg>; + io-supply = <&mt6323_vemc3v3_reg>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan0"; + }; + + port@1 { + reg = <1>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan3"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "trgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_b>; + status = "okay"; + + wm8960: wm8960@1a { + compatible = "wlf,wm8960"; + reg = <0x1a>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_pins_default>; + pinctrl-1 = <&mmc0_pins_uhs>; + status = "okay"; + bus-width = <8>; + max-frequency = <50000000>; + cap-mmc-highspeed; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + non-removable; +}; + +&mmc1 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_uhs>; + status = "okay"; + bus-width = <4>; + max-frequency = <50000000>; + cap-sd-highspeed; + cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_3p3v>; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_default>; + status = "okay"; + + pcie@0,0 { + status = "okay"; + }; + + pcie@1,0 { + status = "okay"; + }; +}; + +&pcie0_phy { + status = "okay"; +}; + +&pcie1_phy { + status = "okay"; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pins_a>; + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins_a>; + status = "okay"; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins_a>; + status = "okay"; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_a>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins_a>; + status = "okay"; +}; + +&usb1 { + vusb33-supply = <®_3p3v>; + vbus-supply = <®_5v>; + status = "okay"; +}; + +&u3phy1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/mt7623n-rfb-nand.dts b/arch/arm/boot/dts/mt7623n-rfb-nand.dts index f729c718aba1..96ff3c9068ae 100644 --- a/arch/arm/boot/dts/mt7623n-rfb-nand.dts +++ b/arch/arm/boot/dts/mt7623n-rfb-nand.dts @@ -1,15 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright (c) 2017 MediaTek Inc. * Author: John Crispin <john@phrozen.org> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ /dts-v1/; @@ -78,34 +71,3 @@ }; }; }; - -&pio { - nand_pins_default: nanddefault { - pins-ale { - pinmux = <MT7623_PIN_116_MSDC0_CMD_FUNC_NALE>; - drive-strength = <MTK_DRIVE_8mA>; - bias-pull-down = <MTK_PUPD_SET_R1R0_10>; - }; - - pins-dat { - pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_NLD7>, - <MT7623_PIN_112_MSDC0_DAT6_FUNC_NLD6>, - <MT7623_PIN_114_MSDC0_DAT4_FUNC_NLD4>, - <MT7623_PIN_118_MSDC0_DAT3_FUNC_NLD3>, - <MT7623_PIN_121_MSDC0_DAT0_FUNC_NLD0>, - <MT7623_PIN_120_MSDC0_DAT1_FUNC_NLD1>, - <MT7623_PIN_113_MSDC0_DAT5_FUNC_NLD5>, - <MT7623_PIN_115_MSDC0_RSTB_FUNC_NLD8>, - <MT7623_PIN_119_MSDC0_DAT2_FUNC_NLD2>; - input-enable; - drive-strength = <MTK_DRIVE_8mA>; - bias-pull-up; - }; - - pins-we { - pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_NWEB>; - drive-strength = <MTK_DRIVE_8mA>; - bias-pull-up = <MTK_PUPD_SET_R1R0_10>; - }; - }; -}; diff --git a/arch/arm/boot/dts/mt7623n-rfb.dtsi b/arch/arm/boot/dts/mt7623n-rfb.dtsi index 256c5fd947bf..5c5cc7da5dd2 100644 --- a/arch/arm/boot/dts/mt7623n-rfb.dtsi +++ b/arch/arm/boot/dts/mt7623n-rfb.dtsi @@ -1,16 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright (c) 2017 MediaTek Inc. * Author: John Crispin <john@phrozen.org> * Sean Wang <sean.wang@mediatek.com> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ /dts-v1/; @@ -47,10 +40,11 @@ }; memory@80000000 { + device_type = "memory"; reg = <0 0x80000000 0 0x40000000>; }; - usb_p1_vbus: regulator@0 { + usb_p1_vbus: regulator-5v { compatible = "regulator-fixed"; regulator-name = "usb_vbus"; regulator-min-microvolt = <5000000>; diff --git a/arch/arm/boot/dts/mt8127-moose.dts b/arch/arm/boot/dts/mt8127-moose.dts index 073e295a1cb4..308829b2da86 100644 --- a/arch/arm/boot/dts/mt8127-moose.dts +++ b/arch/arm/boot/dts/mt8127-moose.dts @@ -1,15 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright (c) 2014 MediaTek Inc. * Author: Joe.C <yingjoe.chen@mediatek.com> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ /dts-v1/; diff --git a/arch/arm/boot/dts/mt8127.dtsi b/arch/arm/boot/dts/mt8127.dtsi index 916c095d11b9..3adfc6f7859c 100644 --- a/arch/arm/boot/dts/mt8127.dtsi +++ b/arch/arm/boot/dts/mt8127.dtsi @@ -1,15 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright (c) 2014 MediaTek Inc. * Author: Joe.C <yingjoe.chen@mediatek.com> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <dt-bindings/interrupt-controller/irq.h> diff --git a/arch/arm/boot/dts/mt8135-evbp1.dts b/arch/arm/boot/dts/mt8135-evbp1.dts index 460db6d05952..0ace7a40a60d 100644 --- a/arch/arm/boot/dts/mt8135-evbp1.dts +++ b/arch/arm/boot/dts/mt8135-evbp1.dts @@ -1,15 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright (c) 2014 MediaTek Inc. * Author: Joe.C <yingjoe.chen@mediatek.com> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ /dts-v1/; diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi index a97b4ee4ae79..688069dc1533 100644 --- a/arch/arm/boot/dts/mt8135.dtsi +++ b/arch/arm/boot/dts/mt8135.dtsi @@ -1,15 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright (c) 2014 MediaTek Inc. * Author: Joe.C <yingjoe.chen@mediatek.com> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <dt-bindings/clock/mt8135-clk.h> diff --git a/arch/arm/boot/dts/omap2420-n810.dts b/arch/arm/boot/dts/omap2420-n810.dts index 7c485fbfa535..96b9913ecc1f 100644 --- a/arch/arm/boot/dts/omap2420-n810.dts +++ b/arch/arm/boot/dts/omap2420-n810.dts @@ -6,11 +6,70 @@ / { model = "Nokia N810"; compatible = "nokia,n810", "nokia,n8x0", "ti,omap2420", "ti,omap2"; + + vio_ape: vio_ape { + compatible = "regulator-fixed"; + regulator-name = "vio_ape"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + v28_aic: v28_aic { + compatible = "regulator-fixed"; + regulator-name = "v28_aic"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; +}; + +&omap2420_pmx { + mcbsp2_pins: mcbsp2_pins { + pinctrl-single,pins = < + OMAP2420_CORE_IOPAD(0x0124, PIN_INPUT | MUX_MODE1) /* eac_ac_sclk.mcbsp2_clkx */ + OMAP2420_CORE_IOPAD(0x0125, PIN_INPUT | MUX_MODE1) /* eac_ac_fs.mcbsp2_fsx */ + OMAP2420_CORE_IOPAD(0x0126, PIN_INPUT | MUX_MODE1) /* eac_ac_din.mcbsp2_dr */ + OMAP2420_CORE_IOPAD(0x0127, PIN_OUTPUT | MUX_MODE1) /* eac_ac_dout.mcbsp2_dx */ + >; + }; + + aic33_pins: aic33_pins { + pinctrl-single,pins = < + OMAP2420_CORE_IOPAD(0x0129, PIN_OUTPUT | MUX_MODE3) /* eac_ac_rst.gpio118 */ + OMAP2420_CORE_IOPAD(0x00e8, PIN_OUTPUT | MUX_MODE2) /* vlynq_tx1.sys_clkout2 */ + >; + }; }; &i2c2 { - aic3x@18 { - compatible = "tlv320aic3x"; + aic33@18 { + compatible = "ti,tlv320aic33"; reg = <0x18>; + + pinctrl-names = "default"; + pinctrl-0 = <&aic33_pins>; + + gpio-reset = <&gpio4 22 GPIO_ACTIVE_LOW>; /* gpio118 */ + + ai3x-gpio-func = < + 10 /* AIC3X_GPIO1_FUNC_DIGITAL_MIC_MODCLK */ + 5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */ + >; + ai3x-micbias-vg = <1>; /* 2V */ + + AVDD-supply = <&v28_aic>; + DRVDD-supply = <&v28_aic>; + IOVDD-supply = <&vio_ape>; + DVDD-supply = <&vio_ape>; + + assigned-clocks = <&sys_clkout2_src>, <&sys_clkout2>; + assigned-clock-parents = <&func_96m_ck>; + assigned-clock-rates = <0>, <12000000>; }; }; + +&mcbsp2 { + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp2_pins>; + + status = "okay"; +}; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 0349fcc9dc26..d80587de0bbf 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -30,6 +30,13 @@ ethernet = ðernet; }; + /* fixed 26MHz oscillator */ + hfclk_26m: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <26000000>; + }; + leds { compatible = "gpio-leds"; @@ -274,6 +281,9 @@ interrupts = <7>; /* SYS_NIRQ cascaded to intc */ interrupt-parent = <&intc>; + clocks = <&hfclk_26m>; + clock-names = "fck"; + twl_audio: audio { compatible = "ti,twl4030-audio"; codec { diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi index 9dcb18d22cde..cdb632df152a 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi @@ -60,7 +60,7 @@ regulator-max-microvolt = <3300000>; }; - tv0: connector { + tv0: svideo-connector { compatible = "svideo-connector"; label = "tv"; diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi index 0c0bb1b01b0b..746a658e84b6 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi +++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi @@ -349,10 +349,17 @@ vdda_dac-supply = <&vdac>; port { - dpi_dvi_out: endpoint { + #address-cells = <1>; + #size-cells = <0>; + dpi_dvi_out: endpoint@0 { + reg = <0>; remote-endpoint = <&tfp410_in>; data-lines = <24>; }; + + endpoint@1 { + reg = <1>; + }; }; }; diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi index 2d64bcffaaa8..1093387259e2 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi +++ b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi @@ -30,7 +30,10 @@ &dss { port { - dpi_lcd_out: endpoint { + #address-cells = <1>; + #size-cells = <0>; + dpi_lcd_out: endpoint@1 { + reg = <1>; remote-endpoint = <&lcd_in>; data-lines = <24>; }; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 4170be70460e..ac830b917776 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -30,6 +30,13 @@ display0 = &lcd; }; + /* fixed 26MHz oscillator */ + hfclk_26m: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <26000000>; + }; + gpio-keys { compatible = "gpio-keys"; @@ -312,6 +319,9 @@ interrupts = <7>; /* SYS_NIRQ cascaded to intc */ interrupt-parent = <&intc>; + clocks = <&hfclk_26m>; + clock-names = "fck"; + twl_audio: audio { compatible = "ti,twl4030-audio"; ti,enable-vibra = <1>; diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi index f83b1029b3b7..90c98f95b2b3 100644 --- a/arch/arm/boot/dts/omap3-pandora-common.dtsi +++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi @@ -27,6 +27,13 @@ display0 = &lcd; }; + /* fixed 26MHz oscillator */ + hfclk_26m: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <26000000>; + }; + tv: connector { compatible = "connector-analog-tv"; label = "tv"; @@ -357,6 +364,9 @@ interrupts = <7>; /* SYS_NIRQ cascaded to intc */ interrupt-parent = <&intc>; + clocks = <&hfclk_26m>; + clock-names = "fck"; + twl_power: power { compatible = "ti,twl4030-power-reset"; ti,use_poweroff; @@ -611,7 +621,7 @@ pinctrl-names = "default"; pinctrl-0 = <&penirq_pins>; interrupt-parent = <&gpio3>; - interrupts = <30 0>; /* GPIO_94 */ + interrupts = <30 IRQ_TYPE_NONE>; /* GPIO_94 */ pendown-gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; vcc-supply = <&vaux4>; diff --git a/arch/arm/boot/dts/omap3-sb-t35.dtsi b/arch/arm/boot/dts/omap3-sb-t35.dtsi index 22b4c8bdcc65..fb9842fa922c 100644 --- a/arch/arm/boot/dts/omap3-sb-t35.dtsi +++ b/arch/arm/boot/dts/omap3-sb-t35.dtsi @@ -34,7 +34,7 @@ }; }; - dvi0: connector { + dvi0: dvi-connector { compatible = "dvi-connector"; label = "dvi"; diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi index 982d1a62661d..132a3b8ab148 100644 --- a/arch/arm/boot/dts/pxa3xx.dtsi +++ b/arch/arm/boot/dts/pxa3xx.dtsi @@ -8,6 +8,10 @@ (gpio <= 98) ? (0x0400 + 4 * (gpio - 27)) : \ (gpio <= 127) ? (0x0600 + 4 * (gpio - 99)) : \ 0) +#define MFP_PIN_PXA300_2(gpio) \ + ((gpio <= 1) ? (0x674 + 4 * gpio) : \ + (gpio <= 6) ? (0x2dc + 4 * gpio) : \ + 0) #define MFP_PIN_PXA310(gpio) \ ((gpio <= 2) ? (0x00b4 + 4 * gpio) : \ @@ -18,6 +22,11 @@ (gpio <= 262) ? 0 : \ (gpio <= 268) ? (0x052c + 4 * (gpio - 263)) : \ 0) +#define MFP_PIN_PXA310_2(gpio) \ + ((gpio <= 1) ? (0x674 + 4 * gpio) : \ + (gpio <= 6) ? (0x2dc + 4 * gpio) : \ + (gpio <= 10) ? (0x52c + 4 * gpio) : \ + 0) #define MFP_PIN_PXA320(gpio) \ ((gpio <= 4) ? (0x0124 + 4 * gpio) : \ @@ -30,6 +39,10 @@ (gpio <= 98) ? (0x04f0 + 4 * (gpio - 74)) : \ (gpio <= 127) ? (0x0600 + 4 * (gpio - 99)) : \ 0) +#define MFP_PIN_PXA320_2(gpio) \ + ((gpio <= 3) ? (0x674 + 4 * gpio) : \ + (gpio <= 5) ? (0x284 + 4 * gpio) : \ + 0) /* * MFP Alternate functions for pins having a gpio. @@ -148,6 +161,7 @@ compatible = "intel,pxa3xx-gpio"; reg = <0x40e00000 0x10000>; clocks = <&clks CLK_GPIO>; + gpio-ranges = <&pinctrl 0 0 128>; interrupt-names = "gpio0", "gpio1", "gpio_mux"; interrupts = <8 9 10>; gpio-controller; @@ -160,7 +174,7 @@ compatible = "marvell,pxa-mmc"; reg = <0x41100000 0x1000>; interrupts = <23>; - clocks = <&clks CLK_MMC>; + clocks = <&clks CLK_MMC1>; dmas = <&pdma 21 3 &pdma 22 3>; dma-names = "rx", "tx"; @@ -171,7 +185,7 @@ compatible = "marvell,pxa-mmc"; reg = <0x42000000 0x1000>; interrupts = <41>; - clocks = <&clks CLK_MMC1>; + clocks = <&clks CLK_MMC2>; dmas = <&pdma 93 3 &pdma 94 3>; dma-names = "rx", "tx"; @@ -182,7 +196,7 @@ compatible = "marvell,pxa-mmc"; reg = <0x42500000 0x1000>; interrupts = <55>; - clocks = <&clks CLK_MMC2>; + clocks = <&clks CLK_MMC3>; dmas = <&pdma 46 3 &pdma 47 3>; dma-names = "rx", "tx"; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 5341a39c0392..4a99c9255104 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -444,7 +444,7 @@ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x12450000 0x100>, <0x12400000 0x03>; - interrupts = <0 193 0x0>; + interrupts = <0 193 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -456,11 +456,12 @@ pinctrl-1 = <&i2c1_pins_sleep>; pinctrl-names = "default", "sleep"; reg = <0x12460000 0x1000>; - interrupts = <0 194 IRQ_TYPE_NONE>; + interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; clock-names = "core", "iface"; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; }; }; @@ -484,11 +485,12 @@ pinctrl-0 = <&i2c2_pins>; pinctrl-1 = <&i2c2_pins_sleep>; pinctrl-names = "default", "sleep"; - interrupts = <0 196 IRQ_TYPE_NONE>; + interrupts = <0 196 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>; clock-names = "core", "iface"; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; }; }; @@ -508,12 +510,13 @@ pinctrl-1 = <&i2c3_pins_sleep>; pinctrl-names = "default", "sleep"; reg = <0x16280000 0x1000>; - interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>; clock-names = "core", "iface"; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; }; }; @@ -534,10 +537,11 @@ pinctrl-1 = <&i2c4_pins_sleep>; pinctrl-names = "default", "sleep"; reg = <0x16380000 0x1000>; - interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>; clock-names = "core", "iface"; + status = "disabled"; }; }; @@ -556,7 +560,7 @@ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x1a240000 0x100>, <0x1a200000 0x03>; - interrupts = <0 154 0x0>; + interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -565,7 +569,7 @@ gsbi5_spi: spi@1a280000 { compatible = "qcom,spi-qup-v1.1.1"; reg = <0x1a280000 0x1000>; - interrupts = <0 155 0>; + interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>; pinctrl-0 = <&spi5_default>; pinctrl-1 = <&spi5_sleep>; pinctrl-names = "default", "sleep"; @@ -592,7 +596,7 @@ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16540000 0x100>, <0x16500000 0x03>; - interrupts = <0 156 0x0>; + interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -604,7 +608,7 @@ pinctrl-1 = <&i2c6_pins_sleep>; pinctrl-names = "default", "sleep"; reg = <0x16580000 0x1000>; - interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>; clock-names = "core", "iface"; @@ -628,7 +632,7 @@ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16640000 0x1000>, <0x16600000 0x1000>; - interrupts = <0 158 0x0>; + interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -640,7 +644,7 @@ pinctrl-1 = <&i2c7_pins_sleep>; pinctrl-names = "default", "sleep"; reg = <0x16680000 0x1000>; - interrupts = <GIC_SPI 159 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>; clock-names = "core", "iface"; @@ -1056,7 +1060,7 @@ compatible = "qcom,apq8064-ahci", "generic-ahci"; status = "disabled"; reg = <0x29000000 0x180>; - interrupts = <GIC_SPI 209 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc SFAB_SATA_S_H_CLK>, <&gcc SATA_H_CLK>, @@ -1082,7 +1086,7 @@ sdcc1bam:dma@12402000{ compatible = "qcom,bam-v1.3.0"; reg = <0x12402000 0x8000>; - interrupts = <0 98 0>; + interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc SDC1_H_CLK>; clock-names = "bam_clk"; #dma-cells = <1>; @@ -1092,7 +1096,7 @@ sdcc3bam:dma@12182000{ compatible = "qcom,bam-v1.3.0"; reg = <0x12182000 0x8000>; - interrupts = <0 96 0>; + interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc SDC3_H_CLK>; clock-names = "bam_clk"; #dma-cells = <1>; @@ -1102,7 +1106,7 @@ sdcc4bam:dma@121c2000{ compatible = "qcom,bam-v1.3.0"; reg = <0x121c2000 0x8000>; - interrupts = <0 95 0>; + interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc SDC4_H_CLK>; clock-names = "bam_clk"; #dma-cells = <1>; @@ -1181,7 +1185,7 @@ compatible = "qcom,adreno-3xx"; reg = <0x04300000 0x20000>; reg-names = "kgsl_3d0_reg_memory"; - interrupts = <GIC_SPI 80 0>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "kgsl_3d0_irq"; clock-names = "core_clk", @@ -1281,7 +1285,7 @@ label = "MDSS DSI CTRL->0"; #address-cells = <1>; #size-cells = <0>; - interrupts = <GIC_SPI 82 0>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; reg = <0x04700000 0x200>; reg-names = "dsi_ctrl"; @@ -1350,8 +1354,8 @@ <&mmcc MDP_AXI_CLK>; reg = <0x07500000 0x100000>; interrupts = - <GIC_SPI 63 0>, - <GIC_SPI 64 0>; + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; qcom,ncb = <2>; }; @@ -1366,8 +1370,8 @@ <&mmcc MDP_AXI_CLK>; reg = <0x07600000 0x100000>; interrupts = - <GIC_SPI 61 0>, - <GIC_SPI 62 0>; + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; qcom,ncb = <2>; }; @@ -1382,8 +1386,8 @@ <&mmcc GFX3D_AXI_CLK>; reg = <0x07c00000 0x100000>; interrupts = - <GIC_SPI 69 0>, - <GIC_SPI 70 0>; + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; qcom,ncb = <3>; }; @@ -1398,8 +1402,8 @@ <&mmcc GFX3D_AXI_CLK>; reg = <0x07d00000 0x100000>; interrupts = - <GIC_SPI 210 0>, - <GIC_SPI 211 0>; + <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>; qcom,ncb = <3>; }; @@ -1417,8 +1421,8 @@ #address-cells = <3>; #size-cells = <2>; ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000 /* I/O */ - 0x82000000 0 0 0x08000000 0 0x07e00000>; /* memory */ - interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>; + 0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* memory */ + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi index e413b21ee331..418f9a022336 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi @@ -20,6 +20,14 @@ model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1"; compatible = "qcom,ipq4019"; + aliases { + serial0 = &blsp1_uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + soc { rng@22000 { status = "ok"; @@ -61,7 +69,7 @@ status = "ok"; }; - spi_0: spi@78b5000 { + spi@78b5000 { pinctrl-0 = <&spi_0_pins>; pinctrl-names = "default"; status = "ok"; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts new file mode 100644 index 000000000000..7a96f300bc8d --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018, The Linux Foundation. All rights reserved. + +#include "qcom-ipq4019-ap.dk04.1.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1-C1"; + compatible = "qcom,ipq4019-dk04.1-c1"; + + soc { + dma@7984000 { + status = "ok"; + }; + + qpic-nand@79b0000 { + status = "ok"; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts new file mode 100644 index 000000000000..2d1c4c6e42f1 --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018, The Linux Foundation. All rights reserved. + +#include "qcom-ipq4019-ap.dk04.1.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1-C3"; + compatible = "qcom,ipq4019-ap-dk04.1-c3"; +}; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi new file mode 100644 index 000000000000..7c1eb1963c67 --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi @@ -0,0 +1,111 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018, The Linux Foundation. All rights reserved. + +#include "qcom-ipq4019.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1"; + + aliases { + serial0 = &blsp1_uart1; + serial1 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256MB */ + }; + + soc { + pinctrl@1000000 { + serial_0_pins: serial0-pinmux { + pins = "gpio16", "gpio17"; + function = "blsp_uart0"; + bias-disable; + }; + + serial_1_pins: serial1-pinmux { + pins = "gpio8", "gpio9", + "gpio10", "gpio11"; + function = "blsp_uart1"; + bias-disable; + }; + + spi_0_pins: spi-0-pinmux { + pinmux { + function = "blsp_spi0"; + pins = "gpio13", "gpio14", "gpio15"; + bias-disable; + }; + pinmux_cs { + function = "gpio"; + pins = "gpio12"; + bias-disable; + output-high; + }; + }; + + i2c_0_pins: i2c-0-pinmux { + pins = "gpio20", "gpio21"; + function = "blsp_i2c0"; + bias-disable; + }; + + nand_pins: nand-pins { + pins = "gpio53", "gpio55", "gpio56", + "gpio57", "gpio58", "gpio59", + "gpio60", "gpio62", "gpio63", + "gpio64", "gpio65", "gpio66", + "gpio67", "gpio68", "gpio69"; + function = "qpic"; + }; + }; + + serial@78af000 { + pinctrl-0 = <&serial_0_pins>; + pinctrl-names = "default"; + status = "ok"; + }; + + serial@78b0000 { + pinctrl-0 = <&serial_1_pins>; + pinctrl-names = "default"; + status = "ok"; + }; + + dma@7884000 { + status = "ok"; + }; + + spi@78b5000 { /* BLSP1 QUP1 */ + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "ok"; + cs-gpios = <&tlmm 12 0>; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + compatible = "n25q128a11"; + spi-max-frequency = <24000000>; + }; + }; + + pci@40000000 { + status = "ok"; + perst-gpio = <&tlmm 38 0x1>; + }; + + qpic-nand@79b0000 { + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts new file mode 100644 index 000000000000..8c7ef6537ae6 --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018, The Linux Foundation. All rights reserved. + +#include "qcom-ipq4019-ap.dk07.1.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C1"; + compatible = "qcom,ipq4019-ap-dk07.1-c1"; + + soc { + pci@40000000 { + status = "ok"; + perst-gpio = <&tlmm 38 0x1>; + }; + + spi@78b6000 { + status = "ok"; + }; + + pinctrl@1000000 { + serial_1_pins: serial1-pinmux { + pins = "gpio8", "gpio9", + "gpio10", "gpio11"; + function = "blsp_uart1"; + bias-disable; + }; + + spi_0_pins: spi-0-pinmux { + pinmux { + function = "blsp_spi0"; + pins = "gpio13", "gpio14", "gpio15"; + bias-disable; + }; + pinmux_cs { + function = "gpio"; + pins = "gpio12"; + bias-disable; + output-high; + }; + }; + }; + + serial@78b0000 { + pinctrl-0 = <&serial_1_pins>; + pinctrl-names = "default"; + status = "ok"; + }; + + spi@78b5000 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "ok"; + cs-gpios = <&tlmm 12 0>; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + compatible = "n25q128a11"; + spi-max-frequency = <24000000>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts new file mode 100644 index 000000000000..af7a9028d492 --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018, The Linux Foundation. All rights reserved. + +#include "qcom-ipq4019-ap.dk07.1.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C2"; + compatible = "qcom,ipq4019-ap-dk07.1-c2"; + + soc { + pinctrl@1000000 { + serial_1_pins: serial1-pinmux { + pins = "gpio8", "gpio9"; + function = "blsp_uart1"; + bias-disable; + }; + }; + + serial@78b0000 { + pinctrl-0 = <&serial_1_pins>; + pinctrl-names = "default"; + status = "ok"; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi new file mode 100644 index 000000000000..9f1a5a668772 --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi @@ -0,0 +1,75 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018, The Linux Foundation. All rights reserved. + +#include "qcom-ipq4019.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512MB */ + }; + + aliases { + serial0 = &blsp1_uart1; + serial1 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + soc { + pinctrl@1000000 { + serial_0_pins: serial0-pinmux { + pins = "gpio16", "gpio17"; + function = "blsp_uart0"; + bias-disable; + }; + + i2c_0_pins: i2c-0-pinmux { + pins = "gpio20", "gpio21"; + function = "blsp_i2c0"; + bias-disable; + }; + + nand_pins: nand-pins { + pins = "gpio53", "gpio55", "gpio56", + "gpio57", "gpio58", "gpio59", + "gpio60", "gpio62", "gpio63", + "gpio64", "gpio65", "gpio66", + "gpio67", "gpio68", "gpio69"; + function = "qpic"; + }; + }; + + serial@78af000 { + pinctrl-0 = <&serial_0_pins>; + pinctrl-names = "default"; + status = "ok"; + }; + + dma@7884000 { + status = "ok"; + }; + + i2c@78b7000 { /* BLSP1 QUP2 */ + pinctrl-0 = <&i2c_0_pins>; + pinctrl-names = "default"; + status = "ok"; + }; + + dma@7984000 { + status = "ok"; + }; + + qpic-nand@79b0000 { + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + status = "ok"; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index 10d112a4078e..7bcd7635e723 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -23,9 +23,27 @@ compatible = "qcom,ipq4019"; interrupt-parent = <&intc>; + reserved-memory { + #address-cells = <0x1>; + #size-cells = <0x1>; + ranges; + + smem_region: smem@87e00000 { + reg = <0x87e00000 0x080000>; + no-map; + }; + + tz@87e80000 { + reg = <0x87e80000 0x180000>; + no-map; + }; + }; + aliases { - spi0 = &spi_0; - i2c0 = &i2c_0; + spi0 = &blsp1_spi1; + spi1 = &blsp1_spi2; + i2c0 = &blsp1_i2c3; + i2c1 = &blsp1_i2c4; }; cpus { @@ -45,7 +63,7 @@ 48000 1100000 200000 1100000 500000 1100000 - 666000 1100000 + 716000 1100000 >; clock-latency = <256000>; }; @@ -104,6 +122,12 @@ }; }; + firmware { + scm { + compatible = "qcom,scm-ipq4019"; + }; + }; + timer { compatible = "arm,armv7-timer"; interrupts = <1 2 0xf08>, @@ -149,13 +173,13 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - interrupts = <0 208 0>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; }; blsp_dma: dma@7884000 { compatible = "qcom,bam-v1.7.0"; reg = <0x07884000 0x23000>; - interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "bam_clk"; #dma-cells = <1>; @@ -163,7 +187,7 @@ status = "disabled"; }; - spi_0: spi@78b5000 { + blsp1_spi1: spi@78b5000 { /* BLSP1 QUP1 */ compatible = "qcom,spi-qup-v2.2.1"; reg = <0x78b5000 0x600>; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; @@ -172,10 +196,26 @@ clock-names = "core", "iface"; #address-cells = <1>; #size-cells = <0>; + dmas = <&blsp_dma 5>, <&blsp_dma 4>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + blsp1_spi2: spi@78b6000 { /* BLSP1 QUP2 */ + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x78b6000 0x600>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&blsp_dma 7>, <&blsp_dma 6>; + dma-names = "rx", "tx"; status = "disabled"; }; - i2c_0: i2c@78b7000 { + blsp1_i2c3: i2c@78b7000 { /* BLSP1 QUP3 */ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x78b7000 0x600>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; @@ -184,14 +224,29 @@ clock-names = "iface", "core"; #address-cells = <1>; #size-cells = <0>; + dmas = <&blsp_dma 9>, <&blsp_dma 8>; + dma-names = "rx", "tx"; status = "disabled"; }; + blsp1_i2c4: i2c@78b8000 { /* BLSP1 QUP4 */ + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x78b8000 0x600>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; + clock-names = "iface", "core"; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&blsp_dma 11>, <&blsp_dma 10>; + dma-names = "rx", "tx"; + status = "disabled"; + }; cryptobam: dma@8e04000 { compatible = "qcom,bam-v1.7.0"; reg = <0x08e04000 0x20000>; - interrupts = <GIC_SPI 207 0>; + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_CRYPTO_AHB_CLK>; clock-names = "bam_clk"; #dma-cells = <1>; @@ -256,10 +311,10 @@ regulator; }; - serial@78af000 { + blsp1_uart1: serial@78af000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x78af000 0x200>; - interrupts = <0 107 0>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; @@ -268,10 +323,10 @@ dma-names = "rx", "tx"; }; - serial@78b0000 { + blsp1_uart2: serial@78b0000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x78b0000 0x200>; - interrupts = <0 108 0>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; @@ -293,6 +348,101 @@ reg = <0x4ab000 0x4>; }; + pcie0: pci@40000000 { + compatible = "qcom,pcie-ipq4019", "snps,dw-pcie"; + reg = <0x40000000 0xf1d + 0x40000f20 0xa8 + 0x80000 0x2000 + 0x40100000 0x1000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000 + 0x82000000 0 0x48000000 0x48000000 0 0x10000000>; + + interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + clocks = <&gcc GCC_PCIE_AHB_CLK>, + <&gcc GCC_PCIE_AXI_M_CLK>, + <&gcc GCC_PCIE_AXI_S_CLK>; + clock-names = "aux", + "master_bus", + "slave_bus"; + + resets = <&gcc PCIE_AXI_M_ARES>, + <&gcc PCIE_AXI_S_ARES>, + <&gcc PCIE_PIPE_ARES>, + <&gcc PCIE_AXI_M_VMIDMT_ARES>, + <&gcc PCIE_AXI_S_XPU_ARES>, + <&gcc PCIE_PARF_XPU_ARES>, + <&gcc PCIE_PHY_ARES>, + <&gcc PCIE_AXI_M_STICKY_ARES>, + <&gcc PCIE_PIPE_STICKY_ARES>, + <&gcc PCIE_PWR_ARES>, + <&gcc PCIE_AHB_ARES>, + <&gcc PCIE_PHY_AHB_ARES>; + reset-names = "axi_m", + "axi_s", + "pipe", + "axi_m_vmid", + "axi_s_xpu", + "parf", + "phy", + "axi_m_sticky", + "pipe_sticky", + "pwr", + "ahb", + "phy_ahb"; + + status = "disabled"; + }; + + qpic_bam: dma@7984000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x7984000 0x1a000>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QPIC_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + status = "disabled"; + }; + + nand: qpic-nand@79b0000 { + compatible = "qcom,ipq4019-nand"; + reg = <0x79b0000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QPIC_CLK>, + <&gcc GCC_QPIC_AHB_CLK>; + clock-names = "core", "aon"; + + dmas = <&qpic_bam 0>, + <&qpic_bam 1>, + <&qpic_bam 2>; + dma-names = "tx", "rx", "cmd"; + status = "disabled"; + + nand@0 { + reg = <0>; + + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-bus-width = <8>; + }; + }; + wifi0: wifi@a000000 { compatible = "qcom,ipq4019-wifi"; reg = <0xa000000 0x200000>; @@ -326,7 +476,7 @@ <GIC_SPI 45 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 168 IRQ_TYPE_NONE>; + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi0", "msi1", "msi2", "msi3", "msi4", "msi5", "msi6", "msi7", "msi8", "msi9", "msi10", "msi11", @@ -368,7 +518,7 @@ <GIC_SPI 61 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 62 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 63 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 169 IRQ_TYPE_NONE>; + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi0", "msi1", "msi2", "msi3", "msi4", "msi5", "msi6", "msi7", "msi8", "msi9", "msi10", "msi11", diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index 33030f9419fe..70698941f64c 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -452,7 +452,7 @@ clock-names = "ram"; rpmcc: clock-controller { - compatible = "qcom,rpmcc-apq8660", "qcom,rpmcc"; + compatible = "qcom,rpmcc-msm8660", "qcom,rpmcc"; #clock-cells = <1>; }; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts new file mode 100644 index 000000000000..5669f5f58a86 --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts @@ -0,0 +1,436 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974.dtsi" +#include "qcom-pm8841.dtsi" +#include "qcom-pm8941.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +/ { + model = "Sony Xperia Z1 Compact"; + compatible = "sony,xperia-amami", "qcom,msm8974"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + input-name = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + volume-down { + label = "volume_down"; + gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEDOWN>; + }; + + camera-snapshot { + label = "camera_snapshot"; + gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_CAMERA>; + }; + + camera-focus { + label = "camera_focus"; + gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_CAMERA_FOCUS>; + }; + + volume-up { + label = "volume_up"; + gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + memory@0 { + reg = <0 0x40000000>, <0x40000000 0x40000000>; + device_type = "memory"; + }; + + smd { + rpm { + rpm_requests { + pm8841-regulators { + s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + }; + + s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + s3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + s4 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + }; + + pm8941-regulators { + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vdd_l9_l10_l17_l22-supply = <&vreg_boost>; + vdd_l13_l20_l23_l24-supply = <&vreg_boost>; + vdd_l21-supply = <&vreg_boost>; + + s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-boot-on; + }; + + s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + s4 { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + + regulator-always-on; + regulator-boot-on; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-boot-on; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-boot-on; + }; + + l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l11 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + }; + + l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + + regulator-boot-on; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l19 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + regulator-allow-set-load; + regulator-boot-on; + regulator-system-load = <200000>; + }; + + l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + regulator-boot-on; + }; + + l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + l23 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + + regulator-boot-on; + }; + }; + }; + }; + }; +}; + +&soc { + sdhci@f9824900 { + status = "ok"; + + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + bus-width = <8>; + non-removable; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhc1_pin_a>; + }; + + sdhci@f98a4900 { + status = "ok"; + + bus-width = <4>; + + vmmc-supply = <&pm8941_l21>; + vqmmc-supply = <&pm8941_l13>; + + cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>; + }; + + serial@f991e000 { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart2_pin_a>; + }; + + + pinctrl@fd510000 { + blsp1_uart2_pin_a: blsp1-uart2-pin-active { + rx { + pins = "gpio5"; + function = "blsp_uart2"; + + drive-strength = <2>; + bias-pull-up; + }; + + tx { + pins = "gpio4"; + function = "blsp_uart2"; + + drive-strength = <4>; + bias-disable; + }; + }; + + i2c2_pins: i2c2 { + mux { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + + drive-strength = <2>; + bias-disable; + }; + }; + + sdhc1_pin_a: sdhc1-pin-active { + clk { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdhc2_cd_pin_a: sdhc2-cd-pin-active { + pins = "gpio62"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + sdhc2_pin_a: sdhc2-pin-active { + clk { + pins = "sdc2_clk"; + drive-strength = <10>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + }; + }; + + dma-controller@f9944000 { + qcom,controlled-remotely; + }; + + usb@f9a55000 { + status = "ok"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy@a { + status = "ok"; + + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x64>; + }; + }; + }; +}; + +&spmi_bus { + pm8941@0 { + charger@1000 { + qcom,fast-charge-safe-current = <1300000>; + qcom,fast-charge-current-limit = <1300000>; + qcom,dc-current-limit = <1300000>; + qcom,fast-charge-safe-voltage = <4400000>; + qcom,fast-charge-high-threshold-voltage = <4350000>; + qcom,fast-charge-low-threshold-voltage = <3400000>; + qcom,auto-recharge-threshold-voltage = <4200000>; + qcom,minimum-input-voltage = <4300000>; + }; + + gpios@c000 { + gpio_keys_pin_a: gpio-keys-active { + pins = "gpio2", "gpio3", "gpio4", "gpio5"; + function = "normal"; + + bias-pull-up; + power-source = <PM8941_GPIO_S3>; + }; + }; + + coincell@2800 { + status = "ok"; + qcom,rset-ohms = <2100>; + qcom,vset-millivolts = <3000>; + }; + }; + + pm8941@1 { + wled@d800 { + status = "ok"; + + qcom,cs-out; + qcom,current-limit = <20>; + qcom,current-boost-limit = <805>; + qcom,switching-freq = <1600>; + qcom,ovp = <29>; + qcom,num-strings = <2>; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi index 1d5ef55c7ee5..2515c5c217ac 100644 --- a/arch/arm/boot/dts/qcom-pm8941.dtsi +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi @@ -139,6 +139,9 @@ #size-cells = <0>; #io-channel-cells = <1>; + bat_temp { + reg = <VADC_LR_MUX1_BAT_THERM>; + }; die_temp { reg = <VADC_DIE_TEMP>; }; @@ -154,6 +157,9 @@ ref_vdd { reg = <VADC_VDD_VADC>; }; + vbat_sns { + reg = <VADC_VBAT_SNS>; + }; }; pm8941_iadc: iadc@3600 { diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index a97458112ff6..567a6a725f9c 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -197,6 +197,8 @@ reg = <0x10118300 0x100>; interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "vop_mmu"; + clocks = <&cru ACLK_LCDC>, <&cru HCLK_LCDC>; + clock-names = "aclk", "iface"; #iommu-cells = <0>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index df1e47858675..be80e9a2c9af 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -584,6 +584,8 @@ reg = <0x20020800 0x100>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "vpu_mmu"; + clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>; + clock-names = "aclk", "iface"; iommu-cells = <0>; status = "disabled"; }; @@ -593,6 +595,8 @@ reg = <0x20030480 0x40>, <0x200304c0 0x40>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "vdec_mmu"; + clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>; + clock-names = "aclk", "iface"; iommu-cells = <0>; status = "disabled"; }; @@ -602,6 +606,8 @@ reg = <0x20053f00 0x100>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "vop_mmu"; + clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>; + clock-names = "aclk", "iface"; iommu-cells = <0>; status = "disabled"; }; @@ -611,6 +617,8 @@ reg = <0x20070800 0x100>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "iep_mmu"; + clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>; + clock-names = "aclk", "iface"; iommu-cells = <0>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/rk3288-phycore-som.dtsi b/arch/arm/boot/dts/rk3288-phycore-som.dtsi index f13bcb1cd3d9..aaab2d171ffe 100644 --- a/arch/arm/boot/dts/rk3288-phycore-som.dtsi +++ b/arch/arm/boot/dts/rk3288-phycore-som.dtsi @@ -151,6 +151,7 @@ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; enet-phy-lane-no-swap; + ti,clk-output-sel = <DP83867_CLK_O_SEL_CHN_A_TCLK>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-tinker.dts b/arch/arm/boot/dts/rk3288-tinker.dts index 346b0d8b474d..127488f9f174 100644 --- a/arch/arm/boot/dts/rk3288-tinker.dts +++ b/arch/arm/boot/dts/rk3288-tinker.dts @@ -49,6 +49,10 @@ model = "Rockchip RK3288 Tinker Board"; compatible = "asus,rk3288-tinker", "rockchip,rk3288"; + chosen { + stdout-path = "serial2:115200n8"; + }; + memory { reg = <0x0 0x0 0x0 0x80000000>; device_type = "memory"; diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi index be487111d025..b16d570ff029 100644 --- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi @@ -95,7 +95,8 @@ pinctrl-names = "default"; pinctrl-0 = <&bl_en>; pwms = <&pwm0 0 1000000 0>; - pwm-delay-us = <10000>; + post-pwm-on-delay-ms = <10>; + pwm-off-delay-ms = <10>; }; gpio-charger { diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts index 544de6027aaa..4c5307e62001 100644 --- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts +++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts @@ -123,6 +123,8 @@ 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255>; power-supply = <&backlight_regulator>; + post-pwm-on-delay-ms = <200>; + pwm-off-delay-ms = <200>; }; &emmc { diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 354aff45c1af..d7e49d29ace5 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -959,6 +959,8 @@ reg = <0x0 0xff900800 0x0 0x40>; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "iep_mmu"; + clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>; + clock-names = "aclk", "iface"; #iommu-cells = <0>; status = "disabled"; }; @@ -968,6 +970,8 @@ reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "isp_mmu"; + clocks = <&cru ACLK_ISP>, <&cru HCLK_ISP>; + clock-names = "aclk", "iface"; #iommu-cells = <0>; rockchip,disable-mmu-reset; status = "disabled"; @@ -1027,6 +1031,8 @@ reg = <0x0 0xff930300 0x0 0x100>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "vopb_mmu"; + clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>; + clock-names = "aclk", "iface"; power-domains = <&power RK3288_PD_VIO>; #iommu-cells = <0>; status = "disabled"; @@ -1075,6 +1081,8 @@ reg = <0x0 0xff940300 0x0 0x100>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "vopl_mmu"; + clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>; + clock-names = "aclk", "iface"; power-domains = <&power RK3288_PD_VIO>; #iommu-cells = <0>; status = "disabled"; @@ -1206,6 +1214,8 @@ reg = <0x0 0xff9a0800 0x0 0x100>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "vpu_mmu"; + clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; + clock-names = "aclk", "iface"; #iommu-cells = <0>; status = "disabled"; }; @@ -1215,6 +1225,8 @@ reg = <0x0 0xff9c0440 0x0 0x40>, <0x0 0xff9c0480 0x0 0x40>; interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hevc_mmu"; + clocks = <&cru ACLK_HEVC>, <&cru HCLK_HEVC>; + clock-names = "aclk", "iface"; #iommu-cells = <0>; status = "disabled"; }; @@ -1848,16 +1860,16 @@ uart4 { uart4_xfer: uart4-xfer { - rockchip,pins = <5 12 3 &pcfg_pull_up>, - <5 13 3 &pcfg_pull_none>; + rockchip,pins = <5 15 3 &pcfg_pull_up>, + <5 14 3 &pcfg_pull_none>; }; uart4_cts: uart4-cts { - rockchip,pins = <5 14 3 &pcfg_pull_up>; + rockchip,pins = <5 12 3 &pcfg_pull_up>; }; uart4_rts: uart4-rts { - rockchip,pins = <5 15 3 &pcfg_pull_none>; + rockchip,pins = <5 13 3 &pcfg_pull_none>; }; }; diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts index a1c9d8c695cc..5164386aff3a 100644 --- a/arch/arm/boot/dts/s3c2416-smdk2416.dts +++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts @@ -12,14 +12,13 @@ model = "SMDK2416"; compatible = "samsung,s3c2416"; - memory { + memory@30000000 { + device_type = "memory"; reg = <0x30000000 0x4000000>; }; clocks { compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; xti: xti { compatible = "fixed-clock"; diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi index 3c7385cab248..6adf64ea3ff2 100644 --- a/arch/arm/boot/dts/s3c2416.dtsi +++ b/arch/arm/boot/dts/s3c2416.dtsi @@ -18,9 +18,6 @@ }; cpus { - #address-cells = <1>; - #size-cells = <0>; - cpu { compatible = "arm,arm926ej-s"; }; @@ -30,7 +27,7 @@ compatible = "samsung,s3c2416-irq"; }; - clocks: clock-controller@0x4c000000 { + clocks: clock-controller@4c000000 { compatible = "samsung,s3c2416-clock"; reg = <0x4c000000 0x40>; #clock-cells = <1>; @@ -69,7 +66,7 @@ <&clocks SCLK_UART>; }; - uart_3: serial@5000C000 { + uart_3: serial@5000c000 { compatible = "samsung,s3c2440-uart"; reg = <0x5000C000 0x4000>; interrupts = <1 18 24 4>, <1 18 25 4>; @@ -80,7 +77,7 @@ status = "disabled"; }; - sdhci_1: sdhci@4AC00000 { + sdhci_1: sdhci@4ac00000 { compatible = "samsung,s3c6410-sdhci"; reg = <0x4AC00000 0x100>; interrupts = <0 0 21 3>; @@ -91,7 +88,7 @@ status = "disabled"; }; - sdhci_0: sdhci@4A800000 { + sdhci_0: sdhci@4a800000 { compatible = "samsung,s3c6410-sdhci"; reg = <0x4A800000 0x100>; interrupts = <0 0 20 3>; diff --git a/arch/arm/boot/dts/s3c24xx.dtsi b/arch/arm/boot/dts/s3c24xx.dtsi index 34c7fe6751cf..6d8dd3cdd3c0 100644 --- a/arch/arm/boot/dts/s3c24xx.dtsi +++ b/arch/arm/boot/dts/s3c24xx.dtsi @@ -5,11 +5,11 @@ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> */ -#include "skeleton.dtsi" - / { compatible = "samsung,s3c24xx"; interrupt-parent = <&intc>; + #address-cells = <1>; + #size-cells = <1>; aliases { pinctrl0 = &pinctrl_0; diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts index f68601bd9c91..0e159c884f97 100644 --- a/arch/arm/boot/dts/s3c6410-mini6410.dts +++ b/arch/arm/boot/dts/s3c6410-mini6410.dts @@ -19,7 +19,8 @@ model = "FriendlyARM Mini6410 board based on S3C6410"; compatible = "friendlyarm,mini6410", "samsung,s3c6410"; - memory { + memory@50000000 { + device_type = "memory"; reg = <0x50000000 0x10000000>; }; diff --git a/arch/arm/boot/dts/s3c6410-smdk6410.dts b/arch/arm/boot/dts/s3c6410-smdk6410.dts index b6b5afcd7602..a9a5689dc462 100644 --- a/arch/arm/boot/dts/s3c6410-smdk6410.dts +++ b/arch/arm/boot/dts/s3c6410-smdk6410.dts @@ -19,7 +19,8 @@ model = "SAMSUNG SMDK6410 board based on S3C6410"; compatible = "samsung,mini6410", "samsung,s3c6410"; - memory { + memory@50000000 { + device_type = "memory"; reg = <0x50000000 0x8000000>; }; diff --git a/arch/arm/boot/dts/s3c64xx.dtsi b/arch/arm/boot/dts/s3c64xx.dtsi index e2be3fbdd3f3..2e611df37911 100644 --- a/arch/arm/boot/dts/s3c64xx.dtsi +++ b/arch/arm/boot/dts/s3c64xx.dtsi @@ -13,10 +13,12 @@ * nodes can be added to this file. */ -#include "skeleton.dtsi" #include <dt-bindings/clock/samsung,s3c64xx-clock.h> / { + #address-cells = <1>; + #size-cells = <1>; + aliases { i2c0 = &i2c0; pinctrl0 = &pinctrl0; diff --git a/arch/arm/boot/dts/ste-ccu8540-pinctrl.dtsi b/arch/arm/boot/dts/ste-ccu8540-pinctrl.dtsi deleted file mode 100644 index 52dba2e39c71..000000000000 --- a/arch/arm/boot/dts/ste-ccu8540-pinctrl.dtsi +++ /dev/null @@ -1,196 +0,0 @@ -/* - * Copyright 2012 ST-Ericsson - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ -#include "ste-nomadik-pinctrl.dtsi" - -/ { - soc { - pinctrl { - uart0 { - uart0_default_mux: uart0_mux { - default_mux { - function = "u0"; - groups = "u0_a_1"; - }; - }; - - uart0_default_mode: uart0_default { - default_cfg1 { - pins = "GPIO0", "GPIO2"; - ste,config = <&in_pu>; - }; - - default_cfg2 { - pins = "GPIO1", "GPIO3"; - ste,config = <&out_hi>; - }; - }; - - uart0_sleep_mode: uart0_sleep { - sleep_cfg1 { - pins = "GPIO0", "GPIO2"; - ste,config = <&slpm_in_pu>; - }; - - sleep_cfg2 { - pins = "GPIO1", "GPIO3"; - ste,config = <&slpm_out_hi>; - }; - }; - }; - - uart2 { - uart2_default_mode: uart2_default { - default_mux { - function = "u2"; - groups = "u2txrx_a_1"; - }; - - default_cfg1 { - pins = "GPIO120"; - ste,config = <&in_pu>; - }; - - default_cfg2 { - pins = "GPIO121"; - ste,config = <&out_hi>; - }; - }; - - uart2_sleep_mode: uart2_sleep { - sleep_cfg1 { - pins = "GPIO120"; - ste,config = <&slpm_in_pu>; - }; - - sleep_cfg2 { - pins = "GPIO121"; - ste,config = <&slpm_out_hi>; - }; - }; - }; - - i2c0 { - i2c0_default_mux: i2c_mux { - default_mux { - function = "i2c0"; - groups = "i2c0_a_1"; - }; - }; - - i2c0_default_mode: i2c_default { - default_cfg1 { - pins = "GPIO147", "GPIO148"; - ste,config = <&in_pu>; - }; - }; - - i2c0_sleep_mode: i2c_sleep { - sleep_cfg1 { - pins = "GPIO147", "GPIO148"; - ste,config = <&slpm_in_pu>; - }; - }; - }; - - i2c1 { - i2c1_default_mux: i2c_mux { - default_mux { - function = "i2c1"; - groups = "i2c1_b_2"; - }; - }; - - i2c1_default_mode: i2c_default { - default_cfg1 { - pins = "GPIO16", "GPIO17"; - ste,config = <&in_pu>; - }; - }; - - i2c1_sleep_mode: i2c_sleep { - sleep_cfg1 { - pins = "GPIO16", "GPIO17"; - ste,config = <&slpm_in_pu>; - }; - }; - }; - - i2c2 { - i2c2_default_mux: i2c_mux { - default_mux { - function = "i2c2"; - groups = "i2c2_b_2"; - }; - }; - - i2c2_default_mode: i2c_default { - default_cfg1 { - pins = "GPIO10", "GPIO11"; - ste,config = <&in_pu>; - }; - }; - - i2c2_sleep_mode: i2c_sleep { - sleep_cfg1 { - pins = "GPIO11", "GPIO11"; - ste,config = <&slpm_in_pu>; - }; - }; - }; - - i2c4 { - i2c4_default_mux: i2c_mux { - default_mux { - function = "i2c4"; - groups = "i2c4_b_2"; - }; - }; - - i2c4_default_mode: i2c_default { - default_cfg1 { - pins = "GPIO122", "GPIO123"; - ste,config = <&in_pu>; - }; - }; - - i2c4_sleep_mode: i2c_sleep { - sleep_cfg1 { - pins = "GPIO122", "GPIO123"; - ste,config = <&slpm_in_pu>; - }; - }; - }; - - i2c5 { - i2c5_default_mux: i2c_mux { - default_mux { - function = "i2c5"; - groups = "i2c5_c_2"; - }; - }; - - i2c5_default_mode: i2c_default { - default_cfg1 { - pins = "GPIO118", "GPIO119"; - ste,config = <&in_pu>; - }; - }; - - i2c5_sleep_mode: i2c_sleep { - sleep_cfg1 { - pins = "GPIO118", "GPIO119"; - ste,config = <&slpm_in_pu>; - }; - }; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/ste-ccu8540.dts b/arch/arm/boot/dts/ste-ccu8540.dts deleted file mode 100644 index 6eaaf638e52e..000000000000 --- a/arch/arm/boot/dts/ste-ccu8540.dts +++ /dev/null @@ -1,94 +0,0 @@ -/* - * Copyright 2013 ST-Ericsson AB - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -/dts-v1/; -#include "ste-dbx5x0.dtsi" -#include "ste-ccu8540-pinctrl.dtsi" - -/ { - model = "ST-Ericsson U8540 platform with Device Tree"; - compatible = "st-ericsson,ccu8540", "st-ericsson,u8540"; - - /* This stablilizes the serial port enumeration */ - aliases { - serial0 = &ux500_serial0; - serial1 = &ux500_serial1; - serial2 = &ux500_serial2; - }; - - memory@0 { - device_type = "memory"; - reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>; - }; - - soc { - pinctrl { - compatible = "stericsson,db8540-pinctrl"; - }; - - prcmu@80157000 { - reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x3000>; - reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm"; - }; - - uart@80120000 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&uart0_default_mux>, <&uart0_default_mode>; - pinctrl-1 = <&uart0_sleep_mode>; - status = "okay"; - }; - - uart@80121000 { - status = "okay"; - }; - - uart@80007000 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&uart2_default_mode>; - pinctrl-1 = <&uart2_sleep_mode>; - status = "okay"; - }; - - i2c0: i2c@80004000 { - pinctrl-names = "default","sleep"; - pinctrl-0 = <&i2c0_default_mux>, <&i2c0_default_mode>; - pinctrl-1 = <&i2c0_sleep_mode>; - }; - - i2c1: i2c@80122000 { - pinctrl-names = "default","sleep"; - pinctrl-0 = <&i2c1_default_mux>, <&i2c1_default_mode>; - pinctrl-1 = <&i2c1_sleep_mode>; - }; - - i2c2: i2c@80128000 { - pinctrl-names = "default","sleep"; - pinctrl-0 = <&i2c2_default_mux>, <&i2c2_default_mode>; - pinctrl-1 = <&i2c2_sleep_mode>; - }; - - i2c3: i2c@80110000 { - status = "disabled"; - }; - - i2c4: i2c@8012a000 { - pinctrl-names = "default","sleep"; - pinctrl-0 = <&i2c4_default_mux>, <&i2c4_default_mode>; - pinctrl-1 = <&i2c4_sleep_mode>; - }; - - i2c5: i2c@80001000 { - pinctrl-names = "default","sleep"; - pinctrl-0 = <&i2c5_default_mux>, <&i2c5_default_mode>; - pinctrl-1 = <&i2c5_sleep_mode>; - }; - }; -}; diff --git a/arch/arm/boot/dts/ste-ccu9540.dts b/arch/arm/boot/dts/ste-ccu9540.dts deleted file mode 100644 index b3b9bb8e1aa8..000000000000 --- a/arch/arm/boot/dts/ste-ccu9540.dts +++ /dev/null @@ -1,79 +0,0 @@ -/* - * Copyright 2012 ST-Ericsson AB - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -/dts-v1/; -#include "ste-dbx5x0.dtsi" - -/ { - model = "ST-Ericsson CCU9540 platform with Device Tree"; - compatible = "st-ericsson,ccu9540", "st-ericsson,u9540"; - - /* This stablilizes the serial port enumeration */ - aliases { - serial0 = &ux500_serial0; - serial1 = &ux500_serial1; - serial2 = &ux500_serial2; - }; - - memory { - reg = <0x00000000 0x20000000>; - }; - - soc { - uart@80120000 { - status = "okay"; - }; - - uart@80121000 { - status = "okay"; - }; - - uart@80007000 { - status = "okay"; - }; - - // External Micro SD slot - sdi0_per1@80126000 { - arm,primecell-periphid = <0x10480180>; - max-frequency = <100000000>; - bus-width = <4>; - cap-sd-highspeed; - cap-mmc-highspeed; - vmmc-supply = <&ab8500_ldo_aux3_reg>; - - cd-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>; // 230 - cd-inverted; - - status = "okay"; - }; - - - // WLAN SDIO channel - sdi1_per2@80118000 { - arm,primecell-periphid = <0x10480180>; - max-frequency = <100000000>; - bus-width = <4>; - - status = "okay"; - }; - - // On-board eMMC - sdi4_per2@80114000 { - arm,primecell-periphid = <0x10480180>; - max-frequency = <100000000>; - bus-width = <8>; - cap-mmc-highspeed; - vmmc-supply = <&ab8500_ldo_aux2_reg>; - - status = "okay"; - }; - }; -}; diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index ade1d0d4e5f4..b0b94d053098 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -46,35 +46,35 @@ #size-cells = <0>; button@1 { - debounce_interval = <50>; + debounce-interval = <50>; wakeup-source; linux,code = <2>; label = "userpb"; gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; }; button@2 { - debounce_interval = <50>; + debounce-interval = <50>; wakeup-source; linux,code = <3>; label = "extkb1"; gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>; }; button@3 { - debounce_interval = <50>; + debounce-interval = <50>; wakeup-source; linux,code = <4>; label = "extkb2"; gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; }; button@4 { - debounce_interval = <50>; + debounce-interval = <50>; wakeup-source; linux,code = <5>; label = "extkb3"; gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; }; button@5 { - debounce_interval = <50>; + debounce-interval = <50>; wakeup-source; linux,code = <6>; label = "extkb4"; diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index f7362c31de29..9e29a4499938 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -206,19 +206,19 @@ vtg_main: sti-vtg-main@8d02800 { compatible = "st,vtg"; reg = <0x8d02800 0x200>; - interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; }; vtg_aux: sti-vtg-aux@8d00200 { compatible = "st,vtg"; reg = <0x8d00200 0x100>; - interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; }; serial@9830000 { compatible = "st,asc"; reg = <0x9830000 0x2c>; - interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; /* Pinctrl moved out to a per-board configuration */ @@ -228,7 +228,7 @@ serial@9831000 { compatible = "st,asc"; reg = <0x9831000 0x2c>; - interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_serial1>; clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; @@ -239,7 +239,7 @@ serial@9832000 { compatible = "st,asc"; reg = <0x9832000 0x2c>; - interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_serial2>; clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; @@ -251,7 +251,7 @@ sbc_serial0: serial@9530000 { compatible = "st,asc"; reg = <0x9530000 0x2c>; - interrupts = <GIC_SPI 138 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sbc_serial0>; clocks = <&clk_sysin>; @@ -262,7 +262,7 @@ serial@9531000 { compatible = "st,asc"; reg = <0x9531000 0x2c>; - interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sbc_serial1>; clocks = <&clk_sysin>; @@ -574,7 +574,7 @@ status = "disabled"; reg = <0x09060000 0x7ff>, <0x9061008 0x20>; reg-names = "mmc", "top-mmc-delay"; - interrupts = <GIC_SPI 92 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "mmcirq"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mmc0>; @@ -589,7 +589,7 @@ status = "disabled"; reg = <0x09080000 0x7ff>; reg-names = "mmc"; - interrupts = <GIC_SPI 90 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "mmcirq"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sd1>; @@ -623,7 +623,7 @@ compatible = "st,ahci"; reg = <0x9b20000 0x1000>; - interrupts = <GIC_SPI 159 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hostc"; phys = <&phy_port0 PHY_TYPE_SATA>; @@ -646,7 +646,7 @@ compatible = "st,ahci"; reg = <0x9b28000 0x1000>; - interrupts = <GIC_SPI 170 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hostc"; phys = <&phy_port1 PHY_TYPE_SATA>; @@ -687,7 +687,7 @@ dwc3: dwc3@9900000 { compatible = "snps,dwc3"; reg = <0x09900000 0x100000>; - interrupts = <GIC_SPI 155 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "host"; phy-names = "usb2-phy", "usb3-phy"; phys = <&usb2_picophy0>, @@ -701,7 +701,7 @@ compatible = "st,sti-pwm"; #pwm-cells = <2>; reg = <0x9810000 0x68>; - interrupts = <GIC_SPI 128 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm0_chan0_default>; clock-names = "pwm"; @@ -716,7 +716,7 @@ compatible = "st,sti-pwm"; #pwm-cells = <2>; reg = <0x9510000 0x68>; - interrupts = <GIC_SPI 131 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1_chan0_default &pinctrl_pwm1_chan1_default @@ -755,8 +755,8 @@ resets = <&softreset STIH407_ETH1_SOFTRESET>; reset-names = "stmmaceth"; - interrupts = <GIC_SPI 98 IRQ_TYPE_NONE>, - <GIC_SPI 99 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq", "eth_wake_irq"; /* DMA Bus Mode */ @@ -787,7 +787,7 @@ mailbox0: mailbox@8f00000 { compatible = "st,stih407-mailbox"; reg = <0x8f00000 0x1000>; - interrupts = <GIC_SPI 1 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; #mbox-cells = <2>; mbox-name = "a9"; status = "okay"; @@ -857,7 +857,7 @@ <&clk_s_c0_flexgen CLK_EXT2F_A9>, <&clk_s_c0_flexgen CLK_EXT2F_A9>, <&clk_s_c0_flexgen CLK_EXT2F_A9>; - interrupts = <GIC_SPI 5 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; dma-channels = <16>; #dma-cells = <3>; }; @@ -875,7 +875,7 @@ <&clk_s_c0_flexgen CLK_TX_ICN_DMU>, <&clk_s_c0_flexgen CLK_EXT2F_A9>; - interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; dma-channels = <16>; #dma-cells = <3>; @@ -890,7 +890,7 @@ <0x8e77000 0x1000>, <0x8e78000 0x8000>; reg-names = "slimcore", "dmem", "peripherals", "imem"; - interrupts = <GIC_SPI 9 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; dma-channels = <16>; #dma-cells = <3>; clocks = <&clk_s_c0_flexgen CLK_FDMA>, @@ -910,7 +910,7 @@ assigned-clock-parents = <0>, <&clk_s_d0_quadfs 0>; assigned-clock-rates = <50000000>; reg = <0x8d80000 0x158>; - interrupts = <GIC_SPI 84 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; dmas = <&fdma0 2 0 1>; dma-names = "tx"; @@ -926,7 +926,7 @@ assigned-clock-parents = <0>, <&clk_s_d0_quadfs 1>; assigned-clock-rates = <50000000>; reg = <0x8d81000 0x158>; - interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; dmas = <&fdma0 3 0 1>; dma-names = "tx"; @@ -942,7 +942,7 @@ assigned-clock-parents = <0>, <&clk_s_d0_quadfs 2>; assigned-clock-rates = <50000000>; reg = <0x8d82000 0x158>; - interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; dmas = <&fdma0 4 0 1>; dma-names = "tx"; @@ -958,7 +958,7 @@ assigned-clock-parents = <0>, <&clk_s_d0_quadfs 3>; assigned-clock-rates = <50000000>; reg = <0x8d85000 0x158>; - interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; dmas = <&fdma0 7 0 1>; dma-names = "tx"; @@ -970,7 +970,7 @@ #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; reg = <0x8d83000 0x158>; - interrupts = <GIC_SPI 87 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; dmas = <&fdma0 5 0 1>; dma-names = "rx"; @@ -982,7 +982,7 @@ #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; reg = <0x8d84000 0x158>; - interrupts = <GIC_SPI 88 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; dmas = <&fdma0 6 0 1>; dma-names = "rx"; diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi index 53c6888d1fc0..e393519fb84c 100644 --- a/arch/arm/boot/dts/stih407-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi @@ -52,7 +52,7 @@ st,syscfg = <&syscfg_sbc>; reg = <0x0961f080 0x4>; reg-names = "irqmux"; - interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "irqmux"; ranges = <0 0x09610000 0x6000>; @@ -376,7 +376,7 @@ st,syscfg = <&syscfg_front>; reg = <0x0920f080 0x4>; reg-names = "irqmux"; - interrupts = <GIC_SPI 189 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "irqmux"; ranges = <0 0x09200000 0x10000>; @@ -936,7 +936,7 @@ st,syscfg = <&syscfg_front>; reg = <0x0921f080 0x4>; reg-names = "irqmux"; - interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "irqmux"; ranges = <0 0x09210000 0x10000>; @@ -969,7 +969,7 @@ st,syscfg = <&syscfg_rear>; reg = <0x0922f080 0x4>; reg-names = "irqmux"; - interrupts = <GIC_SPI 191 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "irqmux"; ranges = <0 0x09220000 0x6000>; @@ -1164,7 +1164,7 @@ st,syscfg = <&syscfg_flash>; reg = <0x0923f080 0x4>; reg-names = "irqmux"; - interrupts = <GIC_SPI 192 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "irqmux"; ranges = <0 0x09230000 0x3000>; diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi index 57efc87dec2b..5b7951ffc350 100644 --- a/arch/arm/boot/dts/stih407.dtsi +++ b/arch/arm/boot/dts/stih407.dtsi @@ -108,7 +108,7 @@ reg = <0x8d04000 0x1000>; reg-names = "hdmi-reg"; #sound-dai-cells = <0>; - interrupts = <GIC_SPI 106 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "irq"; clock-names = "pix", "tmds", diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi index 3313005ee15c..888548ea9b5c 100644 --- a/arch/arm/boot/dts/stih410.dtsi +++ b/arch/arm/boot/dts/stih410.dtsi @@ -43,7 +43,7 @@ ohci0: usb@9a03c00 { compatible = "st,st-ohci-300x"; reg = <0x9a03c00 0x100>; - interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>, <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>; resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>, @@ -58,7 +58,7 @@ ehci0: usb@9a03e00 { compatible = "st,st-ehci-300x"; reg = <0x9a03e00 0x100>; - interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0>; clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>, @@ -75,7 +75,7 @@ ohci1: usb@9a83c00 { compatible = "st,st-ohci-300x"; reg = <0x9a83c00 0x100>; - interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>, <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>; resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>, @@ -90,7 +90,7 @@ ehci1: usb@9a83e00 { compatible = "st,st-ehci-300x"; reg = <0x9a83e00 0x100>; - interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb1>; clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>, @@ -202,7 +202,7 @@ reg = <0x8d04000 0x1000>; reg-names = "hdmi-reg"; #sound-dai-cells = <0>; - interrupts = <GIC_SPI 106 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "irq"; clock-names = "pix", "tmds", @@ -254,7 +254,7 @@ bdisp0:bdisp@9f10000 { compatible = "st,stih407-bdisp"; reg = <0x9f10000 0x1000>; - interrupts = <GIC_SPI 38 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; clock-names = "bdisp"; clocks = <&clk_s_c0_flexgen CLK_IC_BDISP_0>; }; @@ -263,8 +263,8 @@ compatible = "st,st-hva"; reg = <0x8c85000 0x400>, <0x6000000 0x40000>; reg-names = "hva_registers", "hva_esram"; - interrupts = <GIC_SPI 58 IRQ_TYPE_NONE>, - <GIC_SPI 59 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; clock-names = "clk_hva"; clocks = <&clk_s_c0_flexgen CLK_HVA>; }; @@ -292,7 +292,7 @@ reg = <0x94a087c 0x64>; clocks = <&clk_sysin>; clock-names = "cec-clk"; - interrupts = <GIC_SPI 140 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "cec-irq"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cec0_default>; diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi index c67edb1a8121..4dedfcb0fcb3 100644 --- a/arch/arm/boot/dts/stihxxx-b2120.dtsi +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi @@ -154,8 +154,8 @@ reg = <0x08a20000 0x10000>, <0x08a00000 0x4000>; reg-names = "c8sectpfe", "c8sectpfe-ram"; - interrupts = <GIC_SPI 34 IRQ_TYPE_NONE>, - <GIC_SPI 35 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "c8sectpfe-error-irq", "c8sectpfe-idle-irq"; pinctrl-0 = <&pinctrl_tsin0_serial>; diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts index 2f76726bf335..3ee768cb86fc 100644 --- a/arch/arm/boot/dts/stm32f469-disco.dts +++ b/arch/arm/boot/dts/stm32f469-disco.dts @@ -46,7 +46,7 @@ */ /dts-v1/; -#include "stm32f429.dtsi" +#include "stm32f469.dtsi" #include "stm32f469-pinctrl.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -112,7 +112,7 @@ vcc5v_otg: vcc5v-otg-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpiob 2 0>; + gpio = <&gpiob 2 GPIO_ACTIVE_HIGH>; regulator-name = "vcc5_host1"; regulator-always-on; }; @@ -126,6 +126,55 @@ clock-frequency = <8000000>; }; +&dsi { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi_in: endpoint { + remote-endpoint = <<dc_out_dsi>; + }; + }; + + port@1 { + reg = <1>; + dsi_out: endpoint { + remote-endpoint = <&dsi_panel_in>; + }; + }; + }; + + panel-dsi@0 { + compatible = "orisetech,otm8009a"; + reg = <0>; /* dsi virtual channel (0..3) */ + reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>; + status = "okay"; + + port { + dsi_panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; +}; + +<dc { + dma-ranges; + status = "okay"; + + port { + ltdc_out_dsi: endpoint@0 { + remote-endpoint = <&dsi_in>; + }; + }; +}; + &rtc { status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32f469.dtsi b/arch/arm/boot/dts/stm32f469.dtsi new file mode 100644 index 000000000000..5ae5213f68cb --- /dev/null +++ b/arch/arm/boot/dts/stm32f469.dtsi @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ +/* Copyright (C) STMicroelectronics 2017 - All Rights Reserved */ + +#include "stm32f429.dtsi" + +/ { + soc { + dsi: dsi@40016c00 { + compatible = "st,stm32-dsi"; + reg = <0x40016c00 0x800>; + interrupts = <92>; + resets = <&rcc STM32F4_APB2_RESET(DSI)>; + reset-names = "apb"; + clocks = <&rcc 1 CLK_F469_DSI>, <&clk_hse>; + clock-names = "pclk", "ref"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32f746-disco.dts b/arch/arm/boot/dts/stm32f746-disco.dts index be94c6ad7e94..f9ad71f7c807 100644 --- a/arch/arm/boot/dts/stm32f746-disco.dts +++ b/arch/arm/boot/dts/stm32f746-disco.dts @@ -90,6 +90,14 @@ clock-frequency = <25000000>; }; +&i2c1 { + pinctrl-0 = <&i2c1_pins_b>; + pinctrl-names = "default"; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; +}; + &sdio1 { status = "okay"; vmmc-supply = <&mmc_vcard>; diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi index 4be2ee575b19..1479e3eb05fa 100644 --- a/arch/arm/boot/dts/stm32f746.dtsi +++ b/arch/arm/boot/dts/stm32f746.dtsi @@ -345,6 +345,42 @@ status = "disabled"; }; + i2c2: i2c@40005800 { + compatible = "st,stm32f7-i2c"; + reg = <0x40005800 0x400>; + interrupts = <33>, + <34>; + resets = <&rcc STM32F7_APB1_RESET(I2C2)>; + clocks = <&rcc 1 CLK_I2C2>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@40005C00 { + compatible = "st,stm32f7-i2c"; + reg = <0x40005C00 0x400>; + interrupts = <72>, + <73>; + resets = <&rcc STM32F7_APB1_RESET(I2C3)>; + clocks = <&rcc 1 CLK_I2C3>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@40006000 { + compatible = "st,stm32f7-i2c"; + reg = <0x40006000 0x400>; + interrupts = <95>, + <96>; + resets = <&rcc STM32F7_APB1_RESET(I2C4)>; + clocks = <&rcc 1 CLK_I2C4>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + cec: cec@40006c00 { compatible = "st,stm32-cec"; reg = <0x40006C00 0x400>; diff --git a/arch/arm/boot/dts/stm32f769-disco.dts b/arch/arm/boot/dts/stm32f769-disco.dts index 2241eecdabfe..677276ba4dbe 100644 --- a/arch/arm/boot/dts/stm32f769-disco.dts +++ b/arch/arm/boot/dts/stm32f769-disco.dts @@ -111,6 +111,14 @@ clock-frequency = <25000000>; }; +&i2c1 { + pinctrl-0 = <&i2c1_pins_b>; + pinctrl-names = "default"; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; +}; + &rtc { status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi index 0f15dfb98381..24be8e63dec8 100644 --- a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi @@ -163,6 +163,16 @@ #interrupt-cells = <2>; }; + i2c1_pins_a: i2c1@0 { + pins { + pinmux = <STM32_PINMUX('B', 6, AF4)>, /* I2C1_SCL */ + <STM32_PINMUX('B', 7, AF4)>; /* I2C1_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + usart1_pins: usart1@0 { pins1 { pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */ diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi index 2bb103e1194d..637beffe5067 100644 --- a/arch/arm/boot/dts/stm32h743.dtsi +++ b/arch/arm/boot/dts/stm32h743.dtsi @@ -86,6 +86,7 @@ pwm { compatible = "st,stm32-pwm-lp"; + #pwm-cells = <3>; status = "disabled"; }; @@ -130,6 +131,42 @@ clocks = <&rcc USART2_CK>; }; + i2c1: i2c@40005400 { + compatible = "st,stm32f7-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x40005400 0x400>; + interrupts = <31>, + <32>; + resets = <&rcc STM32H7_APB1L_RESET(I2C1)>; + clocks = <&rcc I2C1_CK>; + status = "disabled"; + }; + + i2c2: i2c@40005800 { + compatible = "st,stm32f7-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x40005800 0x400>; + interrupts = <33>, + <34>; + resets = <&rcc STM32H7_APB1L_RESET(I2C2)>; + clocks = <&rcc I2C2_CK>; + status = "disabled"; + }; + + i2c3: i2c@40005C00 { + compatible = "st,stm32f7-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x40005C00 0x400>; + interrupts = <72>, + <73>; + resets = <&rcc STM32H7_APB1L_RESET(I2C3)>; + clocks = <&rcc I2C3_CK>; + status = "disabled"; + }; + dac: dac@40007400 { compatible = "st,stm32h7-dac-core"; reg = <0x40007400 0x400>; @@ -323,6 +360,18 @@ status = "disabled"; }; + i2c4: i2c@58001C00 { + compatible = "st,stm32f7-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x58001C00 0x400>; + interrupts = <95>, + <96>; + resets = <&rcc STM32H7_APB4_RESET(I2C4)>; + clocks = <&rcc I2C4_CK>; + status = "disabled"; + }; + lptimer2: timer@58002400 { #address-cells = <1>; #size-cells = <0>; @@ -334,6 +383,7 @@ pwm { compatible = "st,stm32-pwm-lp"; + #pwm-cells = <3>; status = "disabled"; }; @@ -360,6 +410,7 @@ pwm { compatible = "st,stm32-pwm-lp"; + #pwm-cells = <3>; status = "disabled"; }; @@ -381,6 +432,7 @@ pwm { compatible = "st,stm32-pwm-lp"; + #pwm-cells = <3>; status = "disabled"; }; }; @@ -396,6 +448,7 @@ pwm { compatible = "st,stm32-pwm-lp"; + #pwm-cells = <3>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/stm32h743i-eval.dts b/arch/arm/boot/dts/stm32h743i-eval.dts index c7187e18ea16..3f8e0c4a998d 100644 --- a/arch/arm/boot/dts/stm32h743i-eval.dts +++ b/arch/arm/boot/dts/stm32h743i-eval.dts @@ -92,6 +92,14 @@ clock-frequency = <25000000>; }; +&i2c1 { + pinctrl-0 = <&i2c1_pins_a>; + pinctrl-names = "default"; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; +}; + &rtc { status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi index eb96ac3e6c1d..4839db146890 100644 --- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi @@ -7,7 +7,7 @@ / { soc { - pinctrl: pin-controller { + pinctrl: pin-controller@50002000 { #address-cells = <1>; #size-cells = <1>; compatible = "st,stm32mp157-pinctrl"; @@ -22,7 +22,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x0 0x400>; - clocks = <&clk_pll3_p>; + clocks = <&rcc GPIOA>; st,bank-name = "GPIOA"; ngpios = <16>; gpio-ranges = <&pinctrl 0 0 16>; @@ -34,7 +34,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x1000 0x400>; - clocks = <&clk_pll3_p>; + clocks = <&rcc GPIOB>; st,bank-name = "GPIOB"; ngpios = <16>; gpio-ranges = <&pinctrl 0 16 16>; @@ -46,7 +46,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x2000 0x400>; - clocks = <&clk_pll3_p>; + clocks = <&rcc GPIOC>; st,bank-name = "GPIOC"; ngpios = <16>; gpio-ranges = <&pinctrl 0 32 16>; @@ -58,7 +58,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x3000 0x400>; - clocks = <&clk_pll3_p>; + clocks = <&rcc GPIOD>; st,bank-name = "GPIOD"; ngpios = <16>; gpio-ranges = <&pinctrl 0 48 16>; @@ -70,7 +70,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x4000 0x400>; - clocks = <&clk_pll3_p>; + clocks = <&rcc GPIOE>; st,bank-name = "GPIOE"; ngpios = <16>; gpio-ranges = <&pinctrl 0 64 16>; @@ -82,7 +82,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x5000 0x400>; - clocks = <&clk_pll3_p>; + clocks = <&rcc GPIOF>; st,bank-name = "GPIOF"; ngpios = <16>; gpio-ranges = <&pinctrl 0 80 16>; @@ -94,7 +94,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x6000 0x400>; - clocks = <&clk_pll3_p>; + clocks = <&rcc GPIOG>; st,bank-name = "GPIOG"; ngpios = <16>; gpio-ranges = <&pinctrl 0 96 16>; @@ -106,7 +106,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x7000 0x400>; - clocks = <&clk_pll3_p>; + clocks = <&rcc GPIOH>; st,bank-name = "GPIOH"; ngpios = <16>; gpio-ranges = <&pinctrl 0 112 16>; @@ -118,7 +118,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x8000 0x400>; - clocks = <&clk_pll3_p>; + clocks = <&rcc GPIOI>; st,bank-name = "GPIOI"; ngpios = <16>; gpio-ranges = <&pinctrl 0 128 16>; @@ -130,7 +130,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x9000 0x400>; - clocks = <&clk_pll3_p>; + clocks = <&rcc GPIOJ>; st,bank-name = "GPIOJ"; ngpios = <16>; gpio-ranges = <&pinctrl 0 144 16>; @@ -142,13 +142,124 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0xa000 0x400>; - clocks = <&clk_pll3_p>; + clocks = <&rcc GPIOK>; st,bank-name = "GPIOK"; ngpios = <8>; gpio-ranges = <&pinctrl 0 160 8>; }; - uart4_pins_a: uart4@0 { + cec_pins_a: cec-0 { + pins { + pinmux = <STM32_PINMUX('A', 15, AF4)>; + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c1_pins_a: i2c1-0 { + pins { + pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */ + <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c2_pins_a: i2c2-0 { + pins { + pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */ + <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c5_pins_a: i2c5-0 { + pins { + pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */ + <STM32_PINMUX('A', 12, AF4)>; /* I2C5_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + pwm2_pins_a: pwm2-0 { + pins { + pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm8_pins_a: pwm8-0 { + pins { + pinmux = <STM32_PINMUX('I', 2, AF3)>; /* TIM8_CH4 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm12_pins_a: pwm12-0 { + pins { + pinmux = <STM32_PINMUX('H', 6, AF2)>; /* TIM12_CH1 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + qspi_clk_pins_a: qspi-clk-0 { + pins { + pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + }; + + qspi_bk1_pins_a: qspi-bk1-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */ + <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */ + <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */ + <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */ + bias-pull-up; + drive-push-pull; + slew-rate = <3>; + }; + }; + + qspi_bk2_pins_a: qspi-bk2-0 { + pins1 { + pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */ + <STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */ + <STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */ + <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + pins2 { + pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */ + bias-pull-up; + drive-push-pull; + slew-rate = <3>; + }; + }; + + uart4_pins_a: uart4-0 { pins1 { pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */ bias-disable; @@ -162,7 +273,7 @@ }; }; - pinctrl_z: pin-controller-z { + pinctrl_z: pin-controller-z@54004000 { #address-cells = <1>; #size-cells = <1>; compatible = "st,stm32mp157-z-pinctrl"; @@ -178,12 +289,22 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0 0x400>; - clocks = <&clk_pll2_p>; + clocks = <&rcc GPIOZ>; st,bank-name = "GPIOZ"; st,bank-ioport = <11>; ngpios = <8>; gpio-ranges = <&pinctrl_z 0 400 8>; }; + + i2c4_pins_a: i2c4-0 { + pins { + pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */ + <STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts index 9f90337a22e3..ae336530b59b 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -16,13 +16,56 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@c0000000 { reg = <0xC0000000 0x40000000>; }; aliases { serial0 = &uart4; }; + + reg11: reg11 { + compatible = "regulator-fixed"; + regulator-name = "reg11"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + reg18: reg18 { + compatible = "regulator-fixed"; + regulator-name = "reg18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vdd_usb: vdd-usb { + compatible = "regulator-fixed"; + regulator-name = "vdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +&rng1 { + status = "okay"; +}; + +&timers6 { + status = "okay"; + timer@5 { + status = "okay"; + }; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; }; &uart4 { @@ -30,3 +73,15 @@ pinctrl-0 = <&uart4_pins_a>; status = "okay"; }; + +&usbphyc_port0 { + phy-supply = <&vdd_usb>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; +}; + +&usbphyc_port1 { + phy-supply = <&vdd_usb>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; +}; diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index 57e6dbc52e09..9382d8063031 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -19,3 +19,90 @@ serial0 = &uart4; }; }; + +&cec { + pinctrl-names = "default"; + pinctrl-0 = <&cec_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; +}; + +&i2c5 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; +}; + +&qspi { + pinctrl-names = "default"; + pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>; + reg = <0x58003000 0x1000>, <0x70000000 0x4000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + flash0: mx66l51235l@0 { + reg = <0>; + spi-rx-bus-width = <4>; + spi-max-frequency = <108000000>; + #address-cells = <1>; + #size-cells = <1>; + }; + + flash1: mx66l51235l@1 { + reg = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <108000000>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&timers2 { + status = "disabled"; + pwm { + pinctrl-0 = <&pwm2_pins_a>; + pinctrl-names = "default"; + status = "okay"; + }; + timer@1 { + status = "okay"; + }; +}; + +&timers8 { + status = "disabled"; + pwm { + pinctrl-0 = <&pwm8_pins_a>; + pinctrl-names = "default"; + status = "okay"; + }; + timer@7 { + status = "okay"; + }; +}; + +&timers12 { + status = "disabled"; + pwm { + pinctrl-0 = <&pwm12_pins_a>; + pinctrl-names = "default"; + status = "okay"; + }; + timer@11 { + status = "okay"; + }; +}; + +&usbphyc { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi index 4fa0df853c8a..7d1753893453 100644 --- a/arch/arm/boot/dts/stm32mp157c.dtsi +++ b/arch/arm/boot/dts/stm32mp157c.dtsi @@ -4,6 +4,8 @@ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics. */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/stm32mp1-clks.h> +#include <dt-bindings/reset/stm32mp1-resets.h> / { #address-cells = <1>; @@ -71,12 +73,6 @@ clock-frequency = <24000000>; }; - clk_pll_per: clk-pll-per { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <64000000>; - }; - clk_hsi: clk-hsi { #clock-cells = <0>; compatible = "fixed-clock"; @@ -100,24 +96,6 @@ compatible = "fixed-clock"; clock-frequency = <4000000>; }; - - clk_pclk1: clk-pclk1 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <86000000>; - }; - - clk_pll3_p: clk-pll3_p { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <172000000>; - }; - - clk_pll2_p: clk-pll2_p { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <264000000>; - }; }; soc { @@ -127,60 +105,506 @@ interrupt-parent = <&intc>; ranges; + timers2: timer@40000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40000000 0x400>; + clocks = <&rcc TIM2_K>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@1 { + compatible = "st,stm32h7-timer-trigger"; + reg = <1>; + status = "disabled"; + }; + }; + + timers3: timer@40001000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40001000 0x400>; + clocks = <&rcc TIM3_K>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@2 { + compatible = "st,stm32h7-timer-trigger"; + reg = <2>; + status = "disabled"; + }; + }; + + timers4: timer@40002000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40002000 0x400>; + clocks = <&rcc TIM4_K>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@3 { + compatible = "st,stm32h7-timer-trigger"; + reg = <3>; + status = "disabled"; + }; + }; + + timers5: timer@40003000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40003000 0x400>; + clocks = <&rcc TIM5_K>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@4 { + compatible = "st,stm32h7-timer-trigger"; + reg = <4>; + status = "disabled"; + }; + }; + + timers6: timer@40004000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40004000 0x400>; + clocks = <&rcc TIM6_K>; + clock-names = "int"; + status = "disabled"; + + timer@5 { + compatible = "st,stm32h7-timer-trigger"; + reg = <5>; + status = "disabled"; + }; + }; + + timers7: timer@40005000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40005000 0x400>; + clocks = <&rcc TIM7_K>; + clock-names = "int"; + status = "disabled"; + + timer@6 { + compatible = "st,stm32h7-timer-trigger"; + reg = <6>; + status = "disabled"; + }; + }; + + timers12: timer@40006000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40006000 0x400>; + clocks = <&rcc TIM12_K>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@11 { + compatible = "st,stm32h7-timer-trigger"; + reg = <11>; + status = "disabled"; + }; + }; + + timers13: timer@40007000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40007000 0x400>; + clocks = <&rcc TIM13_K>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@12 { + compatible = "st,stm32h7-timer-trigger"; + reg = <12>; + status = "disabled"; + }; + }; + + timers14: timer@40008000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40008000 0x400>; + clocks = <&rcc TIM14_K>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@13 { + compatible = "st,stm32h7-timer-trigger"; + reg = <13>; + status = "disabled"; + }; + }; + + lptimer1: timer@40009000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-lptimer"; + reg = <0x40009000 0x400>; + clocks = <&rcc LPTIM1_K>; + clock-names = "mux"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm-lp"; + #pwm-cells = <3>; + status = "disabled"; + }; + + trigger@0 { + compatible = "st,stm32-lptimer-trigger"; + reg = <0>; + status = "disabled"; + }; + + counter { + compatible = "st,stm32-lptimer-counter"; + status = "disabled"; + }; + }; + usart2: serial@4000e000 { compatible = "st,stm32h7-uart"; reg = <0x4000e000 0x400>; - interrupts = <GIC_SPI 38 IRQ_TYPE_NONE>; - clocks = <&clk_pclk1>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc USART2_K>; status = "disabled"; }; usart3: serial@4000f000 { compatible = "st,stm32h7-uart"; reg = <0x4000f000 0x400>; - interrupts = <GIC_SPI 39 IRQ_TYPE_NONE>; - clocks = <&clk_pclk1>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc USART3_K>; status = "disabled"; }; uart4: serial@40010000 { compatible = "st,stm32h7-uart"; reg = <0x40010000 0x400>; - interrupts = <GIC_SPI 52 IRQ_TYPE_NONE>; - clocks = <&clk_pclk1>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc UART4_K>; status = "disabled"; }; uart5: serial@40011000 { compatible = "st,stm32h7-uart"; reg = <0x40011000 0x400>; - interrupts = <GIC_SPI 53 IRQ_TYPE_NONE>; - clocks = <&clk_pclk1>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc UART5_K>; + status = "disabled"; + }; + + i2c1: i2c@40012000 { + compatible = "st,stm32f7-i2c"; + reg = <0x40012000 0x400>; + interrupt-names = "event", "error"; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc I2C1_K>; + resets = <&rcc I2C1_R>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@40013000 { + compatible = "st,stm32f7-i2c"; + reg = <0x40013000 0x400>; + interrupt-names = "event", "error"; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc I2C2_K>; + resets = <&rcc I2C2_R>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@40014000 { + compatible = "st,stm32f7-i2c"; + reg = <0x40014000 0x400>; + interrupt-names = "event", "error"; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc I2C3_K>; + resets = <&rcc I2C3_R>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@40015000 { + compatible = "st,stm32f7-i2c"; + reg = <0x40015000 0x400>; + interrupt-names = "event", "error"; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc I2C5_K>; + resets = <&rcc I2C5_R>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; + cec: cec@40016000 { + compatible = "st,stm32-cec"; + reg = <0x40016000 0x400>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc CEC_K>, <&clk_lse>; + clock-names = "cec", "hdmi-cec"; + status = "disabled"; + }; + + dac: dac@40017000 { + compatible = "st,stm32h7-dac-core"; + reg = <0x40017000 0x400>; + clocks = <&rcc DAC12>; + clock-names = "pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + dac1: dac@1 { + compatible = "st,stm32-dac"; + #io-channels-cells = <1>; + reg = <1>; + status = "disabled"; + }; + + dac2: dac@2 { + compatible = "st,stm32-dac"; + #io-channels-cells = <1>; + reg = <2>; + status = "disabled"; + }; + }; + uart7: serial@40018000 { compatible = "st,stm32h7-uart"; reg = <0x40018000 0x400>; - interrupts = <GIC_SPI 82 IRQ_TYPE_NONE>; - clocks = <&clk_pclk1>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc UART7_K>; status = "disabled"; }; uart8: serial@40019000 { compatible = "st,stm32h7-uart"; reg = <0x40019000 0x400>; - interrupts = <GIC_SPI 83 IRQ_TYPE_NONE>; - clocks = <&clk_pclk1>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc UART8_K>; status = "disabled"; }; + timers1: timer@44000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x44000000 0x400>; + clocks = <&rcc TIM1_K>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@0 { + compatible = "st,stm32h7-timer-trigger"; + reg = <0>; + status = "disabled"; + }; + }; + + timers8: timer@44001000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x44001000 0x400>; + clocks = <&rcc TIM8_K>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@7 { + compatible = "st,stm32h7-timer-trigger"; + reg = <7>; + status = "disabled"; + }; + }; + usart6: serial@44003000 { compatible = "st,stm32h7-uart"; reg = <0x44003000 0x400>; - interrupts = <GIC_SPI 71 IRQ_TYPE_NONE>; - clocks = <&clk_pclk1>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc USART6_K>; + status = "disabled"; + }; + + timers15: timer@44006000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x44006000 0x400>; + clocks = <&rcc TIM15_K>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@14 { + compatible = "st,stm32h7-timer-trigger"; + reg = <14>; + status = "disabled"; + }; + }; + + timers16: timer@44007000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x44007000 0x400>; + clocks = <&rcc TIM16_K>; + clock-names = "int"; status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + timer@15 { + compatible = "st,stm32h7-timer-trigger"; + reg = <15>; + status = "disabled"; + }; + }; + + timers17: timer@44008000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x44008000 0x400>; + clocks = <&rcc TIM17_K>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@16 { + compatible = "st,stm32h7-timer-trigger"; + reg = <16>; + status = "disabled"; + }; + }; + + dma1: dma@48000000 { + compatible = "st,stm32-dma"; + reg = <0x48000000 0x400>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc DMA1>; + #dma-cells = <4>; + st,mem2mem; + dma-requests = <8>; + }; + + dma2: dma@48001000 { + compatible = "st,stm32-dma"; + reg = <0x48001000 0x400>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc DMA2>; + #dma-cells = <4>; + st,mem2mem; + dma-requests = <8>; + }; + + dmamux1: dma-router@48002000 { + compatible = "st,stm32h7-dmamux"; + reg = <0x48002000 0x1c>; + #dma-cells = <3>; + dma-requests = <128>; + dma-masters = <&dma1 &dma2>; + dma-channels = <16>; + clocks = <&rcc DMAMUX>; + }; + + rcc: rcc@50000000 { + compatible = "st,stm32mp1-rcc", "syscon"; + reg = <0x50000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; }; exti: interrupt-controller@5000d000 { @@ -190,11 +614,227 @@ reg = <0x5000d000 0x400>; }; + lptimer2: timer@50021000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-lptimer"; + reg = <0x50021000 0x400>; + clocks = <&rcc LPTIM2_K>; + clock-names = "mux"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm-lp"; + #pwm-cells = <3>; + status = "disabled"; + }; + + trigger@1 { + compatible = "st,stm32-lptimer-trigger"; + reg = <1>; + status = "disabled"; + }; + + counter { + compatible = "st,stm32-lptimer-counter"; + status = "disabled"; + }; + }; + + lptimer3: timer@50022000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-lptimer"; + reg = <0x50022000 0x400>; + clocks = <&rcc LPTIM3_K>; + clock-names = "mux"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm-lp"; + #pwm-cells = <3>; + status = "disabled"; + }; + + trigger@2 { + compatible = "st,stm32-lptimer-trigger"; + reg = <2>; + status = "disabled"; + }; + }; + + lptimer4: timer@50023000 { + compatible = "st,stm32-lptimer"; + reg = <0x50023000 0x400>; + clocks = <&rcc LPTIM4_K>; + clock-names = "mux"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm-lp"; + #pwm-cells = <3>; + status = "disabled"; + }; + }; + + lptimer5: timer@50024000 { + compatible = "st,stm32-lptimer"; + reg = <0x50024000 0x400>; + clocks = <&rcc LPTIM5_K>; + clock-names = "mux"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm-lp"; + #pwm-cells = <3>; + status = "disabled"; + }; + }; + + vrefbuf: vrefbuf@50025000 { + compatible = "st,stm32-vrefbuf"; + reg = <0x50025000 0x8>; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2500000>; + clocks = <&rcc VREF>; + status = "disabled"; + }; + + cryp1: cryp@54001000 { + compatible = "st,stm32mp1-cryp"; + reg = <0x54001000 0x400>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc CRYP1>; + resets = <&rcc CRYP1_R>; + status = "disabled"; + }; + + rng1: rng@54003000 { + compatible = "st,stm32-rng"; + reg = <0x54003000 0x400>; + clocks = <&rcc RNG1_K>; + resets = <&rcc RNG1_R>; + status = "disabled"; + }; + + mdma1: dma@58000000 { + compatible = "st,stm32h7-mdma"; + reg = <0x58000000 0x1000>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc MDMA>; + #dma-cells = <5>; + dma-channels = <32>; + dma-requests = <48>; + }; + + qspi: qspi@58003000 { + compatible = "st,stm32f469-qspi"; + reg = <0x58003000 0x1000>, <0x70000000 0x10000000>; + reg-names = "qspi", "qspi_mm"; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc QSPI_K>; + resets = <&rcc QSPI_R>; + status = "disabled"; + }; + + crc1: crc@58009000 { + compatible = "st,stm32f7-crc"; + reg = <0x58009000 0x400>; + clocks = <&rcc CRC1>; + status = "disabled"; + }; + + usbh_ohci: usbh-ohci@5800c000 { + compatible = "generic-ohci"; + reg = <0x5800c000 0x1000>; + clocks = <&rcc USBH>; + resets = <&rcc USBH_R>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + usbh_ehci: usbh-ehci@5800d000 { + compatible = "generic-ehci"; + reg = <0x5800d000 0x1000>; + clocks = <&rcc USBH>; + resets = <&rcc USBH_R>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + companion = <&usbh_ohci>; + status = "disabled"; + }; + + dsi: dsi@5a000000 { + compatible = "st,stm32-dsi"; + reg = <0x5a000000 0x800>; + clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>; + clock-names = "pclk", "ref", "px_clk"; + resets = <&rcc DSI_R>; + reset-names = "apb"; + status = "disabled"; + }; + + ltdc: display-controller@5a001000 { + compatible = "st,stm32-ltdc"; + reg = <0x5a001000 0x400>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc LTDC_PX>; + clock-names = "lcd"; + resets = <&rcc LTDC_R>; + status = "disabled"; + }; + + usbphyc: usbphyc@5a006000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32mp1-usbphyc"; + reg = <0x5a006000 0x1000>; + clocks = <&rcc USBPHY_K>; + resets = <&rcc USBPHY_R>; + status = "disabled"; + + usbphyc_port0: usb-phy@0 { + #phy-cells = <0>; + reg = <0>; + }; + + usbphyc_port1: usb-phy@1 { + #phy-cells = <1>; + reg = <1>; + }; + }; + usart1: serial@5c000000 { compatible = "st,stm32h7-uart"; reg = <0x5c000000 0x400>; - interrupts = <GIC_SPI 37 IRQ_TYPE_NONE>; - clocks = <&clk_pclk1>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc USART1_K>; + status = "disabled"; + }; + + i2c4: i2c@5c002000 { + compatible = "st,stm32f7-i2c"; + reg = <0x5c002000 0x400>; + interrupt-names = "event", "error"; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc I2C4_K>; + resets = <&rcc I2C4_R>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@5c009000 { + compatible = "st,stm32f7-i2c"; + reg = <0x5c009000 0x400>; + interrupt-names = "event", "error"; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc I2C6_K>; + resets = <&rcc I2C6_R>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts new file mode 100644 index 000000000000..81ebc97b76ee --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree Source for A20-Olimex-SOM-EVB-eMMC Board + * + * Copyright (C) 2018 Olimex Ltd. + * Author: Stefan Mavrodiev <stefan@olimex.com> + */ + +/dts-v1/; +#include "sun7i-a20-olimex-som-evb.dts" + +/ { + + model = "Olimex A20-Olimex-SOM-EVB-eMMC"; + compatible = "olimex,a20-olimex-som-evb-emmc", "allwinner,sun7i-a20"; + + mmc2_pwrseq: mmc2_pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&pio 2 18 GPIO_ACTIVE_LOW>; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_a>; + vmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&mmc2_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + emmc: emmc@0 { + reg = <0>; + compatible = "mmc-card"; + broken-hpi; + }; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts index eae8e267b9ef..3d7b5c848fef 100644 --- a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts @@ -172,8 +172,7 @@ pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index 971f9be699a7..44f3cad3de75 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -198,6 +198,8 @@ clock-names = "ahb", "mod"; resets = <&ccu RST_BUS_NAND>; reset-names = "ahb"; + pinctrl-names = "default"; + pinctrl-0 = <&nand_pins &nand_pins_cs0 &nand_pins_rb0>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -315,6 +317,37 @@ bias-pull-up; }; + nand_pins: nand-pins { + pins = "PC0", "PC1", "PC2", "PC5", + "PC8", "PC9", "PC10", "PC11", + "PC12", "PC13", "PC14", "PC15"; + function = "nand0"; + }; + + nand_pins_cs0: nand-pins-cs0 { + pins = "PC4"; + function = "nand0"; + bias-pull-up; + }; + + nand_pins_cs1: nand-pins-cs1 { + pins = "PC3"; + function = "nand0"; + bias-pull-up; + }; + + nand_pins_rb0: nand-pins-rb0 { + pins = "PC6"; + function = "nand0"; + bias-pull-up; + }; + + nand_pins_rb1: nand-pins-rb1 { + pins = "PC7"; + function = "nand0"; + bias-pull-up; + }; + pwm0_pins: pwm0 { pins = "PH0"; function = "pwm0"; diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index a21f2ed07a52..8d278ee001e9 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -236,6 +236,11 @@ #address-cells = <1>; #size-cells = <0>; reg = <1>; + + tcon0_out_dsi: endpoint@1 { + reg = <1>; + remote-endpoint = <&dsi_in_tcon0>; + }; }; }; }; @@ -280,6 +285,45 @@ #io-channel-cells = <0>; }; + dsi: dsi@1ca0000 { + compatible = "allwinner,sun6i-a31-mipi-dsi"; + reg = <0x01ca0000 0x1000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_MIPI_DSI>, + <&ccu CLK_DSI_SCLK>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_MIPI_DSI>; + phys = <&dphy>; + phy-names = "dphy"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + dsi_in_tcon0: endpoint { + remote-endpoint = <&tcon0_out_dsi>; + }; + }; + }; + }; + + dphy: d-phy@1ca1000 { + compatible = "allwinner,sun6i-a31-mipi-dphy"; + reg = <0x01ca1000 0x1000>; + clocks = <&ccu CLK_BUS_MIPI_DSI>, + <&ccu CLK_DSI_DPHY>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_MIPI_DSI>; + status = "disabled"; + #phy-cells = <0>; + }; + fe0: display-frontend@1e00000 { compatible = "allwinner,sun8i-a33-display-frontend"; reg = <0x01e00000 0x20000>; diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 568307639be8..2be23d600957 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -66,6 +66,8 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; operating-points-v2 = <&cpu0_opp_table>; + cci-control-port = <&cci_control0>; + enable-method = "allwinner,sun8i-a83t-smp"; reg = <0>; }; @@ -73,6 +75,8 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; operating-points-v2 = <&cpu0_opp_table>; + cci-control-port = <&cci_control0>; + enable-method = "allwinner,sun8i-a83t-smp"; reg = <1>; }; @@ -80,6 +84,8 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; operating-points-v2 = <&cpu0_opp_table>; + cci-control-port = <&cci_control0>; + enable-method = "allwinner,sun8i-a83t-smp"; reg = <2>; }; @@ -87,6 +93,8 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; operating-points-v2 = <&cpu0_opp_table>; + cci-control-port = <&cci_control0>; + enable-method = "allwinner,sun8i-a83t-smp"; reg = <3>; }; @@ -96,6 +104,8 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; operating-points-v2 = <&cpu1_opp_table>; + cci-control-port = <&cci_control1>; + enable-method = "allwinner,sun8i-a83t-smp"; reg = <0x100>; }; @@ -103,6 +113,8 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; operating-points-v2 = <&cpu1_opp_table>; + cci-control-port = <&cci_control1>; + enable-method = "allwinner,sun8i-a83t-smp"; reg = <0x101>; }; @@ -110,6 +122,8 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; operating-points-v2 = <&cpu1_opp_table>; + cci-control-port = <&cci_control1>; + enable-method = "allwinner,sun8i-a83t-smp"; reg = <0x102>; }; @@ -117,6 +131,8 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; operating-points-v2 = <&cpu1_opp_table>; + cci-control-port = <&cci_control1>; + enable-method = "allwinner,sun8i-a83t-smp"; reg = <0x103>; }; }; @@ -349,6 +365,44 @@ }; }; + cpucfg@1700000 { + compatible = "allwinner,sun8i-a83t-cpucfg"; + reg = <0x01700000 0x400>; + }; + + cci@1790000 { + compatible = "arm,cci-400"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x01790000 0x10000>; + ranges = <0x0 0x01790000 0x10000>; + + cci_control0: slave-if@4000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x4000 0x1000>; + }; + + cci_control1: slave-if@5000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x5000 0x1000>; + }; + + pmu@9000 { + compatible = "arm,cci-400-pmu,r1"; + reg = <0x9000 0x5000>; + interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + syscon: syscon@1c00000 { compatible = "allwinner,sun8i-a83t-system-controller", "syscon"; @@ -492,6 +546,11 @@ #size-cells = <0>; }; + sid: eeprom@1c14000 { + compatible = "allwinner,sun8i-a83t-sid"; + reg = <0x1c14000 0x400>; + }; + usb_otg: usb@1c19000 { compatible = "allwinner,sun8i-a83t-musb", "allwinner,sun8i-a33-musb"; @@ -928,6 +987,11 @@ #reset-cells = <1>; }; + r_cpucfg@1f01c00 { + compatible = "allwinner,sun8i-a83t-r-cpucfg"; + reg = <0x1f01c00 0x400>; + }; + r_pio: pinctrl@1f02c00 { compatible = "allwinner,sun8i-a83t-r-pinctrl"; reg = <0x01f02c00 0x400>; diff --git a/arch/arm/boot/dts/sun8i-h2-plus-libretech-all-h3-cc.dts b/arch/arm/boot/dts/sun8i-h2-plus-libretech-all-h3-cc.dts new file mode 100644 index 000000000000..4db0d4bb65eb --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h2-plus-libretech-all-h3-cc.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org> + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-libretech-all-h3-cc.dtsi" + +/ { + model = "Libre Computer Board ALL-H3-CC H2+"; + compatible = "libretech,all-h3-cc-h2-plus", "allwinner,sun8i-h2-plus"; +}; diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts index 0bc031fe4c56..84cd9c061227 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts @@ -89,6 +89,23 @@ gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>; }; + reg_vdd_cpux: vdd-cpux-regulator { + compatible = "regulator-gpio"; + regulator-name = "vdd-cpux"; + regulator-type = "voltage"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-ramp-delay = <50>; /* 4ms */ + + gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + enable-active-high; + gpios-states = <1>; + states = <1100000 0 + 1300000 1>; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; @@ -96,6 +113,10 @@ }; }; +&cpu0 { + cpu-supply = <®_vdd_cpux>; +}; + &ehci0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts b/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts index b20a710da7bc..a8b2f0f1c11d 100644 --- a/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts +++ b/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts @@ -6,213 +6,9 @@ /dts-v1/; #include "sun8i-h3.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> +#include "sunxi-libretech-all-h3-cc.dtsi" / { model = "Libre Computer Board ALL-H3-CC H3"; compatible = "libretech,all-h3-cc-h3", "allwinner,sun8i-h3"; - - aliases { - ethernet0 = &emac; - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&hdmi_out_con>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - - pwr_led { - label = "librecomputer:green:pwr"; - gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ - default-state = "on"; - }; - - status_led { - label = "librecomputer:blue:status"; - gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */ - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - - power { - label = "power"; - linux,code = <KEY_POWER>; - gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ - }; - }; - - reg_vcc1v2: vcc1v2 { - compatible = "regulator-fixed"; - regulator-name = "vcc1v2"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <®_vcc5v0>; - gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ - enable-active-high; - }; - - reg_vcc3v3: vcc3v3 { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <®_vcc5v0>; - }; - - /* This represents the board's 5V input */ - reg_vcc5v0: vcc5v0 { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - reg_vcc_dram: vcc-dram { - compatible = "regulator-fixed"; - regulator-name = "vcc-dram"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <®_vcc5v0>; - gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ - enable-active-high; - }; - - reg_vcc_io: vcc-io { - compatible = "regulator-fixed"; - regulator-name = "vcc-io"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <®_vcc3v3>; - gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */ - }; - - reg_vdd_cpux: vdd-cpux { - compatible = "regulator-fixed"; - regulator-name = "vdd-cpux"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <®_vcc5v0>; - gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ - enable-active-high; - }; -}; - -&codec { - allwinner,audio-routing = - "Line Out", "LINEOUT", - "MIC1", "Mic", - "Mic", "MBIAS"; - status = "okay"; -}; - -&de { - status = "okay"; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&ehci2 { - status = "okay"; -}; - -&ehci3 { - status = "okay"; -}; - -&emac { - phy-handle = <&int_mii_phy>; - phy-mode = "mii"; - allwinner,leds-active-low; - status = "okay"; -}; - -&hdmi { - status = "okay"; -}; - -&hdmi_out { - hdmi_out_con: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; -}; - -&ir { - pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; - status = "okay"; -}; - -&mmc0 { - vmmc-supply = <®_vcc_io>; - bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&ohci2 { - status = "okay"; -}; - -&ohci3 { - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "host"; - status = "okay"; -}; - -&usbphy { - /* VBUS on USB ports are always on */ - usb0_vbus-supply = <®_vcc5v0>; - usb1_vbus-supply = <®_vcc5v0>; - usb2_vbus-supply = <®_vcc5v0>; - usb3_vbus-supply = <®_vcc5v0>; - status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts index 232f124ce62c..245fd658defb 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts @@ -99,6 +99,27 @@ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; }; }; + + reg_vdd_cpux: vdd-cpux-regulator { + compatible = "regulator-gpio"; + regulator-name = "vdd-cpux"; + regulator-type = "voltage"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-ramp-delay = <50>; /* 4ms */ + + gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + enable-active-high; + gpios-states = <0x1>; + states = <1100000 0x0 + 1300000 0x1>; + }; +}; + +&cpu0 { + cpu-supply = <®_vdd_cpux>; }; &de { diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts index cea4d647ecbf..46240334128f 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts @@ -113,6 +113,10 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <®_vdd_cpux>; +}; + &ehci0 { status = "okay"; }; @@ -182,6 +186,30 @@ }; }; +&r_i2c { + status = "okay"; + + reg_vdd_cpux: regulator@65 { + compatible = "silergy,sy8106a"; + reg = <0x65>; + regulator-name = "vdd-cpux"; + silergy,fixed-microvolt = <1200000>; + /* + * The datasheet uses 1.1V as the minimum value of VDD-CPUX, + * however both the Armbian DVFS table and the official one + * have operating points with voltage under 1.1V, and both + * DVFS table are known to work properly at the lowest + * operating point. + * + * Use 1.0V as the minimum voltage instead. + */ + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + &r_pio { leds_r_opc: led_pins { pins = "PL10"; diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 10da8ed7db81..41d57c76f290 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -43,32 +43,62 @@ #include "sunxi-h3-h5.dtsi" / { + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp@648000000 { + opp-hz = /bits/ 64 <648000000>; + opp-microvolt = <1040000 1040000 1300000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp@816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <1100000 1100000 1300000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp@1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1200000 1200000 1300000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0>; + clocks = <&ccu CLK_CPUX>; + clock-names = "cpu"; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; cpu@1 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <1>; + operating-points-v2 = <&cpu0_opp_table>; }; cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <2>; + operating-points-v2 = <&cpu0_opp_table>; }; cpu@3 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <3>; + operating-points-v2 = <&cpu0_opp_table>; }; }; diff --git a/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts b/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts new file mode 100644 index 000000000000..fc0658cfa319 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 +/* Copyright (c) 2016 FUKAUMI Naoki <naobsd@gmail.com> */ + +/dts-v1/; +#include "sun8i-a33.dtsi" +#include "sunxi-common-regulators.dtsi" + +/ { + model = "Nintendo NES Classic Edition"; + compatible = "nintendo,nes-classic", "allwinner,sun8i-r16", + "allwinner,sun8i-a33"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + /* + * UART0 is available on two ports: PB and PF, both are accessible. + * PF can also be used for the SD card so PB is preferred. + */ + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&nfc { + status = "okay"; + + /* 2Gb Macronix MX30LF2G18AC (3V) */ + nand@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + allwinner,rb = <0>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <16>; + nand-ecc-step-size = <1024>; + }; +}; + +&usb_otg { + status = "okay"; + dr_mode = "otg"; +}; + +&usbphy { + /* VBUS is always on because it is wired to the power supply */ + usb1_vbus-supply = <®_vcc5v0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-r16-nintendo-super-nes-classic.dts b/arch/arm/boot/dts/sun8i-r16-nintendo-super-nes-classic.dts new file mode 100644 index 000000000000..80761d7904ec --- /dev/null +++ b/arch/arm/boot/dts/sun8i-r16-nintendo-super-nes-classic.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 +/* Copyright (c) 2018 Miquèl RAYNAL <miquel.raynal@bootlin.com> */ + +/dts-v1/; +#include "sun8i-r16-nintendo-nes-classic.dts" + +/ { + model = "Nintendo SuperNES Classic Edition"; + compatible = "nintendo,super-nes-classic", "nintendo,nes-classic", + "allwinner,sun8i-r16", "allwinner,sun8i-a33"; +}; diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts index 27d9ccd0ef2f..25fb048c7df2 100644 --- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts +++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts @@ -51,6 +51,7 @@ compatible = "sinovoip,bpi-m2-ultra", "allwinner,sun8i-r40"; aliases { + ethernet0 = &gmac; serial0 = &uart0; }; @@ -101,6 +102,22 @@ status = "okay"; }; +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_rgmii_pins>; + phy-handle = <&phy1>; + phy-mode = "rgmii"; + phy-supply = <®_dc1sw>; + status = "okay"; +}; + +&gmac_mdio { + phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + &i2c0 { status = "okay"; @@ -114,6 +131,48 @@ #include "axp22x.dtsi" +&mmc0 { + vmmc-supply = <®_dcdc1>; + bus-width = <4>; + cd-gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */ + cd-inverted; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pg_pins>; + vmmc-supply = <®_dldo2>; + vqmmc-supply = <®_dldo1>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&mmc2 { + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_dcdc1>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vcc-pa"; +}; + ®_aldo3 { regulator-always-on; regulator-min-microvolt = <2700000>; @@ -121,6 +180,12 @@ regulator-name = "avcc"; }; +®_dc1sw { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-gmac-phy"; +}; + ®_dcdc1 { regulator-always-on; regulator-min-microvolt = <3000000>; @@ -161,40 +226,6 @@ regulator-name = "vcc-wifi"; }; -&mmc0 { - vmmc-supply = <®_dcdc1>; - bus-width = <4>; - cd-gpios = <&pio 7 13 GPIO_ACTIVE_LOW>; /* PH13 */ - status = "okay"; -}; - -&mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pg_pins>; - vmmc-supply = <®_dldo2>; - vqmmc-supply = <®_dldo1>; - mmc-pwrseq = <&wifi_pwrseq>; - bus-width = <4>; - non-removable; - status = "okay"; -}; - -&mmc2 { - vmmc-supply = <®_dcdc1>; - vqmmc-supply = <®_dcdc1>; - bus-width = <8>; - non-removable; - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&ohci2 { - status = "okay"; -}; - &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi index 173dcc1652d2..bd97ca3dc2fa 100644 --- a/arch/arm/boot/dts/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/sun8i-r40.dtsi @@ -265,6 +265,19 @@ #interrupt-cells = <3>; #gpio-cells = <3>; + gmac_rgmii_pins: gmac-rgmii-pins { + pins = "PA0", "PA1", "PA2", "PA3", + "PA4", "PA5", "PA6", "PA7", + "PA8", "PA10", "PA11", "PA12", + "PA13", "PA15", "PA16"; + function = "gmac"; + /* + * data lines in RGMII mode use DDR mode + * and need a higher signal drive strength + */ + drive-strength = <40>; + }; + i2c0_pins: i2c0-pins { pins = "PB0", "PB1"; function = "i2c0"; @@ -451,6 +464,27 @@ #size-cells = <0>; }; + gmac: ethernet@1c50000 { + compatible = "allwinner,sun8i-r40-gmac"; + syscon = <&ccu>; + reg = <0x01c50000 0x10000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + resets = <&ccu RST_BUS_GMAC>; + reset-names = "stmmaceth"; + clocks = <&ccu CLK_BUS_GMAC>; + clock-names = "stmmaceth"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + gmac_mdio: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + gic: interrupt-controller@1c81000 { compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts index a26d72c3f9b5..35859d8f3267 100644 --- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts +++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts @@ -87,6 +87,11 @@ }; }; +&ehci1 { + /* Terminus Tech FE 1.1s 4-port USB 2.0 hub here */ + status = "okay"; +}; + &i2c0 { status = "okay"; @@ -170,3 +175,8 @@ pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; + +&usbphy { + usb1_vbus-supply = <®_vcc5v0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index 1be1a02d6df2..c3bff1105e5d 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -822,6 +822,19 @@ status = "disabled"; }; + r_i2c: i2c@1f02400 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01f02400 0x400>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&r_i2c_pins>; + clocks = <&r_ccu CLK_APB0_I2C>; + resets = <&r_ccu RST_APB0_I2C>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + r_pio: pinctrl@1f02c00 { compatible = "allwinner,sun8i-h3-r-pinctrl"; reg = <0x01f02c00 0x400>; @@ -837,6 +850,11 @@ pins = "PL11"; function = "s_cir_rx"; }; + + r_i2c_pins: r-i2c { + pins = "PL0", "PL1"; + function = "s_i2c"; + }; }; }; }; diff --git a/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi b/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi new file mode 100644 index 000000000000..f7ffdd6658a2 --- /dev/null +++ b/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi @@ -0,0 +1,215 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org> + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + aliases { + ethernet0 = &emac; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + pwr_led { + label = "librecomputer:green:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ + default-state = "on"; + }; + + status_led { + label = "librecomputer:blue:status"; + gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */ + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + power { + label = "power"; + linux,code = <KEY_POWER>; + gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ + }; + }; + + reg_vcc1v2: vcc1v2 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_vcc5v0>; + gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + enable-active-high; + }; + + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_vcc5v0>; + }; + + /* This represents the board's 5V input */ + reg_vcc5v0: vcc5v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_vcc_dram: vcc-dram { + compatible = "regulator-fixed"; + regulator-name = "vcc-dram"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_vcc5v0>; + gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ + enable-active-high; + }; + + reg_vcc_io: vcc-io { + compatible = "regulator-fixed"; + regulator-name = "vcc-io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_vcc3v3>; + gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */ + }; + + reg_vdd_cpux: vdd-cpux { + compatible = "regulator-fixed"; + regulator-name = "vdd-cpux"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_vcc5v0>; + gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + enable-active-high; + }; +}; + +&codec { + allwinner,audio-routing = + "Line Out", "LINEOUT", + "MIC1", "Mic", + "Mic", "MBIAS"; + status = "okay"; +}; + +&cpu0 { + cpu-supply = <®_vdd_cpux>; +}; + +&de { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + +&mmc0 { + vmmc-supply = <®_vcc_io>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + /* VBUS on USB ports are always on */ + usb0_vbus-supply = <®_vcc5v0>; + usb1_vbus-supply = <®_vcc5v0>; + usb2_vbus-supply = <®_vcc5v0>; + usb3_vbus-supply = <®_vcc5v0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index 0e4a13295d8a..84c4358dacac 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -19,6 +19,7 @@ clocks = <&tegra_car TEGRA114_CLK_HOST1X>; resets = <&tegra_car 28>; reset-names = "host1x"; + iommus = <&mc TEGRA_SWGROUP_HC>; #address-cells = <1>; #size-cells = <1>; @@ -32,6 +33,8 @@ clocks = <&tegra_car TEGRA114_CLK_GR2D>; resets = <&tegra_car 21>; reset-names = "2d"; + + iommus = <&mc TEGRA_SWGROUP_G2>; }; gr3d@54180000 { @@ -40,6 +43,8 @@ clocks = <&tegra_car TEGRA114_CLK_GR3D>; resets = <&tegra_car 24>; reset-names = "3d"; + + iommus = <&mc TEGRA_SWGROUP_NV>; }; dc@54200000 { diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi index bb67edb016c5..3455822350c5 100644 --- a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi +++ b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi @@ -1536,15 +1536,15 @@ }; serial@70006040 { - compatible = "nvidia,tegra124-hsuart"; + compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart"; }; serial@70006200 { - compatible = "nvidia,tegra124-hsuart"; + compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart"; }; serial@70006300 { - compatible = "nvidia,tegra124-hsuart"; + compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart"; }; hdmi_ddc: i2c@7000c700 { diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi index 65a2161b9b8e..9f960c84ba10 100644 --- a/arch/arm/boot/dts/tegra124-apalis.dtsi +++ b/arch/arm/boot/dts/tegra124-apalis.dtsi @@ -1565,15 +1565,15 @@ }; serial@70006040 { - compatible = "nvidia,tegra124-hsuart"; + compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart"; }; serial@70006200 { - compatible = "nvidia,tegra124-hsuart"; + compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart"; }; serial@70006300 { - compatible = "nvidia,tegra124-hsuart"; + compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart"; }; hdmi_ddc: i2c@7000c400 { diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index a110cf84d85f..09087b9c5e26 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -112,6 +112,7 @@ clocks = <&tegra_car TEGRA30_CLK_HOST1X>; resets = <&tegra_car 28>; reset-names = "host1x"; + iommus = <&mc TEGRA_SWGROUP_HC>; #address-cells = <1>; #size-cells = <1>; @@ -125,6 +126,8 @@ clocks = <&tegra_car TEGRA30_CLK_MPE>; resets = <&tegra_car 60>; reset-names = "mpe"; + + iommus = <&mc TEGRA_SWGROUP_MPE>; }; vi@54080000 { @@ -134,6 +137,8 @@ clocks = <&tegra_car TEGRA30_CLK_VI>; resets = <&tegra_car 20>; reset-names = "vi"; + + iommus = <&mc TEGRA_SWGROUP_VI>; }; epp@540c0000 { @@ -143,6 +148,8 @@ clocks = <&tegra_car TEGRA30_CLK_EPP>; resets = <&tegra_car 19>; reset-names = "epp"; + + iommus = <&mc TEGRA_SWGROUP_EPP>; }; isp@54100000 { @@ -152,6 +159,8 @@ clocks = <&tegra_car TEGRA30_CLK_ISP>; resets = <&tegra_car 23>; reset-names = "isp"; + + iommus = <&mc TEGRA_SWGROUP_ISP>; }; gr2d@54140000 { @@ -161,6 +170,8 @@ clocks = <&tegra_car TEGRA30_CLK_GR2D>; resets = <&tegra_car 21>; reset-names = "2d"; + + iommus = <&mc TEGRA_SWGROUP_G2>; }; gr3d@54180000 { @@ -172,6 +183,9 @@ resets = <&tegra_car 24>, <&tegra_car 98>; reset-names = "3d", "3d2"; + + iommus = <&mc TEGRA_SWGROUP_NV>, + <&mc TEGRA_SWGROUP_NV2>; }; dc@54200000 { diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi index 844124bc9c9c..49539f035219 100644 --- a/arch/arm/boot/dts/uniphier-pro4.dtsi +++ b/arch/arm/boot/dts/uniphier-pro4.dtsi @@ -286,7 +286,7 @@ has-transaction-translator; }; - soc-glue@5f800000 { + soc_glue: soc-glue@5f800000 { compatible = "socionext,uniphier-pro4-soc-glue", "simple-mfd", "syscon"; reg = <0x5f800000 0x2000>; @@ -371,10 +371,14 @@ interrupts = <0 66 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ether_rgmii>; - clocks = <&sys_clk 6>; - resets = <&sys_rst 6>; + clock-names = "gio", "ether", "ether-gb", "ether-phy"; + clocks = <&sys_clk 12>, <&sys_clk 6>, <&sys_clk 7>, + <&sys_clk 10>; + reset-names = "gio", "ether"; + resets = <&sys_rst 12>, <&sys_rst 6>; phy-mode = "rgmii"; local-mac-address = [00 00 00 00 00 00]; + socionext,syscon-phy-mode = <&soc_glue 0>; mdio: mdio { #address-cells = <1>; diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi index debcbd15c24b..641d96119d4f 100644 --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi @@ -506,10 +506,13 @@ interrupts = <0 66 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ether_rgmii>; + clock-names = "ether"; clocks = <&sys_clk 6>; + reset-names = "ether"; resets = <&sys_rst 6>; phy-mode = "rgmii"; local-mac-address = [00 00 00 00 00 00]; + socionext,syscon-phy-mode = <&soc_glue 0>; mdio: mdio { #address-cells = <1>; diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index 35714ff6f467..4488c8fe213a 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -17,426 +17,436 @@ * CHANGES TO vexpress-v2m.dtsi! */ - motherboard { - model = "V2M-P1"; - arm,hbi = <0x190>; - arm,vexpress,site = <0>; - arm,v2m-memory-map = "rs1"; - compatible = "arm,vexpress,v2m-p1", "simple-bus"; - #address-cells = <2>; /* SMB chipselect number and offset */ - #size-cells = <1>; - #interrupt-cells = <1>; - ranges; - - flash@0,00000000 { - compatible = "arm,vexpress-flash", "cfi-flash"; - reg = <0 0x00000000 0x04000000>, - <4 0x00000000 0x04000000>; - bank-width = <4>; - }; +/ { + smb@8000000 { + motherboard { + model = "V2M-P1"; + arm,hbi = <0x190>; + arm,vexpress,site = <0>; + arm,v2m-memory-map = "rs1"; + compatible = "arm,vexpress,v2m-p1", "simple-bus"; + #address-cells = <2>; /* SMB chipselect number and offset */ + #size-cells = <1>; + #interrupt-cells = <1>; + ranges; - psram@1,00000000 { - compatible = "arm,vexpress-psram", "mtd-ram"; - reg = <1 0x00000000 0x02000000>; - bank-width = <4>; - }; + flash@0,00000000 { + compatible = "arm,vexpress-flash", "cfi-flash"; + reg = <0 0x00000000 0x04000000>, + <4 0x00000000 0x04000000>; + bank-width = <4>; + }; - v2m_video_ram: vram@2,00000000 { - compatible = "arm,vexpress-vram"; - reg = <2 0x00000000 0x00800000>; - }; + psram@1,00000000 { + compatible = "arm,vexpress-psram", "mtd-ram"; + reg = <1 0x00000000 0x02000000>; + bank-width = <4>; + }; - ethernet@2,02000000 { - compatible = "smsc,lan9118", "smsc,lan9115"; - reg = <2 0x02000000 0x10000>; - interrupts = <15>; - phy-mode = "mii"; - reg-io-width = <4>; - smsc,irq-active-high; - smsc,irq-push-pull; - vdd33a-supply = <&v2m_fixed_3v3>; - vddvario-supply = <&v2m_fixed_3v3>; - }; + v2m_video_ram: vram@2,00000000 { + compatible = "arm,vexpress-vram"; + reg = <2 0x00000000 0x00800000>; + }; - usb@2,03000000 { - compatible = "nxp,usb-isp1761"; - reg = <2 0x03000000 0x20000>; - interrupts = <16>; - port1-otg; - }; + ethernet@2,02000000 { + compatible = "smsc,lan9118", "smsc,lan9115"; + reg = <2 0x02000000 0x10000>; + interrupts = <15>; + phy-mode = "mii"; + reg-io-width = <4>; + smsc,irq-active-high; + smsc,irq-push-pull; + vdd33a-supply = <&v2m_fixed_3v3>; + vddvario-supply = <&v2m_fixed_3v3>; + }; - iofpga@3,00000000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 3 0 0x200000>; + usb@2,03000000 { + compatible = "nxp,usb-isp1761"; + reg = <2 0x03000000 0x20000>; + interrupts = <16>; + port1-otg; + }; - v2m_sysreg: sysreg@10000 { - compatible = "arm,vexpress-sysreg"; - reg = <0x010000 0x1000>; + iofpga@3,00000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 3 0 0x200000>; + + v2m_sysreg: sysreg@10000 { + compatible = "arm,vexpress-sysreg"; + reg = <0x010000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x10000 0x1000>; + + v2m_led_gpios: gpio@8 { + compatible = "arm,vexpress-sysreg,sys_led"; + reg = <0x008 4>; + gpio-controller; + #gpio-cells = <2>; + }; - v2m_led_gpios: sys_led { - compatible = "arm,vexpress-sysreg,sys_led"; - gpio-controller; - #gpio-cells = <2>; - }; + v2m_mmc_gpios: gpio@48 { + compatible = "arm,vexpress-sysreg,sys_mci"; + reg = <0x048 4>; + gpio-controller; + #gpio-cells = <2>; + }; - v2m_mmc_gpios: sys_mci { - compatible = "arm,vexpress-sysreg,sys_mci"; - gpio-controller; - #gpio-cells = <2>; + v2m_flash_gpios: gpio@4c { + compatible = "arm,vexpress-sysreg,sys_flash"; + reg = <0x04c 4>; + gpio-controller; + #gpio-cells = <2>; + }; }; - v2m_flash_gpios: sys_flash { - compatible = "arm,vexpress-sysreg,sys_flash"; - gpio-controller; - #gpio-cells = <2>; + v2m_sysctl: sysctl@20000 { + compatible = "arm,sp810", "arm,primecell"; + reg = <0x020000 0x1000>; + clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>; + clock-names = "refclk", "timclk", "apb_pclk"; + #clock-cells = <1>; + clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; + assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>; + assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>; }; - }; - v2m_sysctl: sysctl@20000 { - compatible = "arm,sp810", "arm,primecell"; - reg = <0x020000 0x1000>; - clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>; - clock-names = "refclk", "timclk", "apb_pclk"; - #clock-cells = <1>; - clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; - assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>; - assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>; - }; + /* PCI-E I2C bus */ + v2m_i2c_pcie: i2c@30000 { + compatible = "arm,versatile-i2c"; + reg = <0x030000 0x1000>; - /* PCI-E I2C bus */ - v2m_i2c_pcie: i2c@30000 { - compatible = "arm,versatile-i2c"; - reg = <0x030000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; - #address-cells = <1>; - #size-cells = <0>; + pcie-switch@60 { + compatible = "idt,89hpes32h8"; + reg = <0x60>; + }; + }; - pcie-switch@60 { - compatible = "idt,89hpes32h8"; - reg = <0x60>; + aaci@40000 { + compatible = "arm,pl041", "arm,primecell"; + reg = <0x040000 0x1000>; + interrupts = <11>; + clocks = <&smbclk>; + clock-names = "apb_pclk"; }; - }; - aaci@40000 { - compatible = "arm,pl041", "arm,primecell"; - reg = <0x040000 0x1000>; - interrupts = <11>; - clocks = <&smbclk>; - clock-names = "apb_pclk"; - }; + mmci@50000 { + compatible = "arm,pl180", "arm,primecell"; + reg = <0x050000 0x1000>; + interrupts = <9 10>; + cd-gpios = <&v2m_mmc_gpios 0 0>; + wp-gpios = <&v2m_mmc_gpios 1 0>; + max-frequency = <12000000>; + vmmc-supply = <&v2m_fixed_3v3>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "mclk", "apb_pclk"; + }; - mmci@50000 { - compatible = "arm,pl180", "arm,primecell"; - reg = <0x050000 0x1000>; - interrupts = <9 10>; - cd-gpios = <&v2m_mmc_gpios 0 0>; - wp-gpios = <&v2m_mmc_gpios 1 0>; - max-frequency = <12000000>; - vmmc-supply = <&v2m_fixed_3v3>; - clocks = <&v2m_clk24mhz>, <&smbclk>; - clock-names = "mclk", "apb_pclk"; - }; + kmi@60000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x060000 0x1000>; + interrupts = <12>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; - kmi@60000 { - compatible = "arm,pl050", "arm,primecell"; - reg = <0x060000 0x1000>; - interrupts = <12>; - clocks = <&v2m_clk24mhz>, <&smbclk>; - clock-names = "KMIREFCLK", "apb_pclk"; - }; + kmi@70000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x070000 0x1000>; + interrupts = <13>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; - kmi@70000 { - compatible = "arm,pl050", "arm,primecell"; - reg = <0x070000 0x1000>; - interrupts = <13>; - clocks = <&v2m_clk24mhz>, <&smbclk>; - clock-names = "KMIREFCLK", "apb_pclk"; - }; + v2m_serial0: uart@90000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x090000 0x1000>; + interrupts = <5>; + clocks = <&v2m_oscclk2>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; + }; - v2m_serial0: uart@90000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x090000 0x1000>; - interrupts = <5>; - clocks = <&v2m_oscclk2>, <&smbclk>; - clock-names = "uartclk", "apb_pclk"; - }; + v2m_serial1: uart@a0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0a0000 0x1000>; + interrupts = <6>; + clocks = <&v2m_oscclk2>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; + }; - v2m_serial1: uart@a0000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0a0000 0x1000>; - interrupts = <6>; - clocks = <&v2m_oscclk2>, <&smbclk>; - clock-names = "uartclk", "apb_pclk"; - }; + v2m_serial2: uart@b0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0b0000 0x1000>; + interrupts = <7>; + clocks = <&v2m_oscclk2>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; + }; - v2m_serial2: uart@b0000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0b0000 0x1000>; - interrupts = <7>; - clocks = <&v2m_oscclk2>, <&smbclk>; - clock-names = "uartclk", "apb_pclk"; - }; + v2m_serial3: uart@c0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0c0000 0x1000>; + interrupts = <8>; + clocks = <&v2m_oscclk2>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; + }; - v2m_serial3: uart@c0000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0c0000 0x1000>; - interrupts = <8>; - clocks = <&v2m_oscclk2>, <&smbclk>; - clock-names = "uartclk", "apb_pclk"; - }; + wdt@f0000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x0f0000 0x1000>; + interrupts = <0>; + clocks = <&v2m_refclk32khz>, <&smbclk>; + clock-names = "wdogclk", "apb_pclk"; + }; - wdt@f0000 { - compatible = "arm,sp805", "arm,primecell"; - reg = <0x0f0000 0x1000>; - interrupts = <0>; - clocks = <&v2m_refclk32khz>, <&smbclk>; - clock-names = "wdogclk", "apb_pclk"; - }; + v2m_timer01: timer@110000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x110000 0x1000>; + interrupts = <2>; + clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>; + clock-names = "timclken1", "timclken2", "apb_pclk"; + }; - v2m_timer01: timer@110000 { - compatible = "arm,sp804", "arm,primecell"; - reg = <0x110000 0x1000>; - interrupts = <2>; - clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>; - clock-names = "timclken1", "timclken2", "apb_pclk"; - }; + v2m_timer23: timer@120000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x120000 0x1000>; + interrupts = <3>; + clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>; + clock-names = "timclken1", "timclken2", "apb_pclk"; + }; - v2m_timer23: timer@120000 { - compatible = "arm,sp804", "arm,primecell"; - reg = <0x120000 0x1000>; - interrupts = <3>; - clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>; - clock-names = "timclken1", "timclken2", "apb_pclk"; - }; + /* DVI I2C bus */ + v2m_i2c_dvi: i2c@160000 { + compatible = "arm,versatile-i2c"; + reg = <0x160000 0x1000>; - /* DVI I2C bus */ - v2m_i2c_dvi: i2c@160000 { - compatible = "arm,versatile-i2c"; - reg = <0x160000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; - #address-cells = <1>; - #size-cells = <0>; + dvi-transmitter@39 { + compatible = "sil,sii9022-tpi", "sil,sii9022"; + reg = <0x39>; + }; - dvi-transmitter@39 { - compatible = "sil,sii9022-tpi", "sil,sii9022"; - reg = <0x39>; + dvi-transmitter@60 { + compatible = "sil,sii9022-cpi", "sil,sii9022"; + reg = <0x60>; + }; }; - dvi-transmitter@60 { - compatible = "sil,sii9022-cpi", "sil,sii9022"; - reg = <0x60>; + rtc@170000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0x170000 0x1000>; + interrupts = <4>; + clocks = <&smbclk>; + clock-names = "apb_pclk"; }; - }; - rtc@170000 { - compatible = "arm,pl031", "arm,primecell"; - reg = <0x170000 0x1000>; - interrupts = <4>; - clocks = <&smbclk>; - clock-names = "apb_pclk"; - }; - - compact-flash@1a0000 { - compatible = "arm,vexpress-cf", "ata-generic"; - reg = <0x1a0000 0x100 - 0x1a0100 0xf00>; - reg-shift = <2>; - }; - - clcd@1f0000 { - compatible = "arm,pl111", "arm,primecell"; - reg = <0x1f0000 0x1000>; - interrupt-names = "combined"; - interrupts = <14>; - clocks = <&v2m_oscclk1>, <&smbclk>; - clock-names = "clcdclk", "apb_pclk"; - memory-region = <&v2m_video_ram>; - max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */ - - port { - v2m_clcd_pads: endpoint { - remote-endpoint = <&v2m_clcd_panel>; - arm,pl11x,tft-r0g0b0-pads = <0 8 16>; - }; + compact-flash@1a0000 { + compatible = "arm,vexpress-cf", "ata-generic"; + reg = <0x1a0000 0x100 + 0x1a0100 0xf00>; + reg-shift = <2>; }; - panel { - compatible = "panel-dpi"; + clcd@1f0000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x1f0000 0x1000>; + interrupt-names = "combined"; + interrupts = <14>; + clocks = <&v2m_oscclk1>, <&smbclk>; + clock-names = "clcdclk", "apb_pclk"; + memory-region = <&v2m_video_ram>; + max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */ port { - v2m_clcd_panel: endpoint { - remote-endpoint = <&v2m_clcd_pads>; + v2m_clcd_pads: endpoint { + remote-endpoint = <&v2m_clcd_panel>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; }; }; - panel-timing { - clock-frequency = <25175000>; - hactive = <640>; - hback-porch = <40>; - hfront-porch = <24>; - hsync-len = <96>; - vactive = <480>; - vback-porch = <32>; - vfront-porch = <11>; - vsync-len = <2>; + panel { + compatible = "panel-dpi"; + + port { + v2m_clcd_panel: endpoint { + remote-endpoint = <&v2m_clcd_pads>; + }; + }; + + panel-timing { + clock-frequency = <25175000>; + hactive = <640>; + hback-porch = <40>; + hfront-porch = <24>; + hsync-len = <96>; + vactive = <480>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <2>; + }; }; }; }; - }; - v2m_fixed_3v3: fixed-regulator-0 { - compatible = "regulator-fixed"; - regulator-name = "3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + v2m_fixed_3v3: fixed-regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - v2m_clk24mhz: clk24mhz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000000>; - clock-output-names = "v2m:clk24mhz"; - }; + v2m_clk24mhz: clk24mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "v2m:clk24mhz"; + }; - v2m_refclk1mhz: refclk1mhz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <1000000>; - clock-output-names = "v2m:refclk1mhz"; - }; + v2m_refclk1mhz: refclk1mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + clock-output-names = "v2m:refclk1mhz"; + }; - v2m_refclk32khz: refclk32khz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "v2m:refclk32khz"; - }; + v2m_refclk32khz: refclk32khz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "v2m:refclk32khz"; + }; - leds { - compatible = "gpio-leds"; + leds { + compatible = "gpio-leds"; - user1 { - label = "v2m:green:user1"; - gpios = <&v2m_led_gpios 0 0>; - linux,default-trigger = "heartbeat"; - }; + user1 { + label = "v2m:green:user1"; + gpios = <&v2m_led_gpios 0 0>; + linux,default-trigger = "heartbeat"; + }; - user2 { - label = "v2m:green:user2"; - gpios = <&v2m_led_gpios 1 0>; - linux,default-trigger = "mmc0"; - }; + user2 { + label = "v2m:green:user2"; + gpios = <&v2m_led_gpios 1 0>; + linux,default-trigger = "mmc0"; + }; - user3 { - label = "v2m:green:user3"; - gpios = <&v2m_led_gpios 2 0>; - linux,default-trigger = "cpu0"; - }; + user3 { + label = "v2m:green:user3"; + gpios = <&v2m_led_gpios 2 0>; + linux,default-trigger = "cpu0"; + }; - user4 { - label = "v2m:green:user4"; - gpios = <&v2m_led_gpios 3 0>; - linux,default-trigger = "cpu1"; - }; + user4 { + label = "v2m:green:user4"; + gpios = <&v2m_led_gpios 3 0>; + linux,default-trigger = "cpu1"; + }; - user5 { - label = "v2m:green:user5"; - gpios = <&v2m_led_gpios 4 0>; - linux,default-trigger = "cpu2"; - }; + user5 { + label = "v2m:green:user5"; + gpios = <&v2m_led_gpios 4 0>; + linux,default-trigger = "cpu2"; + }; - user6 { - label = "v2m:green:user6"; - gpios = <&v2m_led_gpios 5 0>; - linux,default-trigger = "cpu3"; - }; + user6 { + label = "v2m:green:user6"; + gpios = <&v2m_led_gpios 5 0>; + linux,default-trigger = "cpu3"; + }; - user7 { - label = "v2m:green:user7"; - gpios = <&v2m_led_gpios 6 0>; - linux,default-trigger = "cpu4"; - }; + user7 { + label = "v2m:green:user7"; + gpios = <&v2m_led_gpios 6 0>; + linux,default-trigger = "cpu4"; + }; - user8 { - label = "v2m:green:user8"; - gpios = <&v2m_led_gpios 7 0>; - linux,default-trigger = "cpu5"; + user8 { + label = "v2m:green:user8"; + gpios = <&v2m_led_gpios 7 0>; + linux,default-trigger = "cpu5"; + }; }; - }; - mcc { - compatible = "arm,vexpress,config-bus"; - arm,vexpress,config-bridge = <&v2m_sysreg>; + mcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; - oscclk0 { - /* MCC static memory clock */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 0>; - freq-range = <25000000 60000000>; - #clock-cells = <0>; - clock-output-names = "v2m:oscclk0"; - }; + oscclk0 { + /* MCC static memory clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <25000000 60000000>; + #clock-cells = <0>; + clock-output-names = "v2m:oscclk0"; + }; - v2m_oscclk1: oscclk1 { - /* CLCD clock */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 1>; - freq-range = <23750000 65000000>; - #clock-cells = <0>; - clock-output-names = "v2m:oscclk1"; - }; + v2m_oscclk1: oscclk1 { + /* CLCD clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <23750000 65000000>; + #clock-cells = <0>; + clock-output-names = "v2m:oscclk1"; + }; - v2m_oscclk2: oscclk2 { - /* IO FPGA peripheral clock */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 2>; - freq-range = <24000000 24000000>; - #clock-cells = <0>; - clock-output-names = "v2m:oscclk2"; - }; + v2m_oscclk2: oscclk2 { + /* IO FPGA peripheral clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 2>; + freq-range = <24000000 24000000>; + #clock-cells = <0>; + clock-output-names = "v2m:oscclk2"; + }; - volt-vio { - /* Logic level voltage */ - compatible = "arm,vexpress-volt"; - arm,vexpress-sysreg,func = <2 0>; - regulator-name = "VIO"; - regulator-always-on; - label = "VIO"; - }; + volt-vio { + /* Logic level voltage */ + compatible = "arm,vexpress-volt"; + arm,vexpress-sysreg,func = <2 0>; + regulator-name = "VIO"; + regulator-always-on; + label = "VIO"; + }; - temp-mcc { - /* MCC internal operating temperature */ - compatible = "arm,vexpress-temp"; - arm,vexpress-sysreg,func = <4 0>; - label = "MCC"; - }; + temp-mcc { + /* MCC internal operating temperature */ + compatible = "arm,vexpress-temp"; + arm,vexpress-sysreg,func = <4 0>; + label = "MCC"; + }; - reset { - compatible = "arm,vexpress-reset"; - arm,vexpress-sysreg,func = <5 0>; - }; + reset { + compatible = "arm,vexpress-reset"; + arm,vexpress-sysreg,func = <5 0>; + }; - muxfpga { - compatible = "arm,vexpress-muxfpga"; - arm,vexpress-sysreg,func = <7 0>; - }; + muxfpga { + compatible = "arm,vexpress-muxfpga"; + arm,vexpress-sysreg,func = <7 0>; + }; - shutdown { - compatible = "arm,vexpress-shutdown"; - arm,vexpress-sysreg,func = <8 0>; - }; + shutdown { + compatible = "arm,vexpress-shutdown"; + arm,vexpress-sysreg,func = <8 0>; + }; - reboot { - compatible = "arm,vexpress-reboot"; - arm,vexpress-sysreg,func = <9 0>; - }; + reboot { + compatible = "arm,vexpress-reboot"; + arm,vexpress-sysreg,func = <9 0>; + }; - dvimode { - compatible = "arm,vexpress-dvimode"; - arm,vexpress-sysreg,func = <11 0>; + dvimode { + compatible = "arm,vexpress-dvimode"; + arm,vexpress-sysreg,func = <11 0>; + }; }; }; }; +}; diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi index b0021a816028..4db42f6326a3 100644 --- a/arch/arm/boot/dts/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -18,425 +18,435 @@ * CHANGES TO vexpress-v2m-rs1.dtsi! */ - motherboard { - model = "V2M-P1"; - arm,hbi = <0x190>; - arm,vexpress,site = <0>; - compatible = "arm,vexpress,v2m-p1", "simple-bus"; - #address-cells = <2>; /* SMB chipselect number and offset */ - #size-cells = <1>; - #interrupt-cells = <1>; - ranges; - - flash@0,00000000 { - compatible = "arm,vexpress-flash", "cfi-flash"; - reg = <0 0x00000000 0x04000000>, - <1 0x00000000 0x04000000>; - bank-width = <4>; - }; +/ { + smb@4000000 { + motherboard { + model = "V2M-P1"; + arm,hbi = <0x190>; + arm,vexpress,site = <0>; + compatible = "arm,vexpress,v2m-p1", "simple-bus"; + #address-cells = <2>; /* SMB chipselect number and offset */ + #size-cells = <1>; + #interrupt-cells = <1>; + ranges; - psram@2,00000000 { - compatible = "arm,vexpress-psram", "mtd-ram"; - reg = <2 0x00000000 0x02000000>; - bank-width = <4>; - }; + flash@0,00000000 { + compatible = "arm,vexpress-flash", "cfi-flash"; + reg = <0 0x00000000 0x04000000>, + <1 0x00000000 0x04000000>; + bank-width = <4>; + }; - v2m_video_ram: vram@3,00000000 { - compatible = "arm,vexpress-vram"; - reg = <3 0x00000000 0x00800000>; - }; + psram@2,00000000 { + compatible = "arm,vexpress-psram", "mtd-ram"; + reg = <2 0x00000000 0x02000000>; + bank-width = <4>; + }; - ethernet@3,02000000 { - compatible = "smsc,lan9118", "smsc,lan9115"; - reg = <3 0x02000000 0x10000>; - interrupts = <15>; - phy-mode = "mii"; - reg-io-width = <4>; - smsc,irq-active-high; - smsc,irq-push-pull; - vdd33a-supply = <&v2m_fixed_3v3>; - vddvario-supply = <&v2m_fixed_3v3>; - }; + v2m_video_ram: vram@3,00000000 { + compatible = "arm,vexpress-vram"; + reg = <3 0x00000000 0x00800000>; + }; - usb@3,03000000 { - compatible = "nxp,usb-isp1761"; - reg = <3 0x03000000 0x20000>; - interrupts = <16>; - port1-otg; - }; + ethernet@3,02000000 { + compatible = "smsc,lan9118", "smsc,lan9115"; + reg = <3 0x02000000 0x10000>; + interrupts = <15>; + phy-mode = "mii"; + reg-io-width = <4>; + smsc,irq-active-high; + smsc,irq-push-pull; + vdd33a-supply = <&v2m_fixed_3v3>; + vddvario-supply = <&v2m_fixed_3v3>; + }; - iofpga@7,00000000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 7 0 0x20000>; + usb@3,03000000 { + compatible = "nxp,usb-isp1761"; + reg = <3 0x03000000 0x20000>; + interrupts = <16>; + port1-otg; + }; - v2m_sysreg: sysreg@0 { - compatible = "arm,vexpress-sysreg"; - reg = <0x00000 0x1000>; + iofpga@7,00000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 7 0 0x20000>; + + v2m_sysreg: sysreg@0 { + compatible = "arm,vexpress-sysreg"; + reg = <0x00000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1000>; + + v2m_led_gpios: gpio@8 { + compatible = "arm,vexpress-sysreg,sys_led"; + reg = <0x008 4>; + gpio-controller; + #gpio-cells = <2>; + }; - v2m_led_gpios: sys_led { - compatible = "arm,vexpress-sysreg,sys_led"; - gpio-controller; - #gpio-cells = <2>; - }; + v2m_mmc_gpios: gpio@48 { + compatible = "arm,vexpress-sysreg,sys_mci"; + reg = <0x048 4>; + gpio-controller; + #gpio-cells = <2>; + }; - v2m_mmc_gpios: sys_mci { - compatible = "arm,vexpress-sysreg,sys_mci"; - gpio-controller; - #gpio-cells = <2>; + v2m_flash_gpios: gpio@4c { + compatible = "arm,vexpress-sysreg,sys_flash"; + reg = <0x04c 4>; + gpio-controller; + #gpio-cells = <2>; + }; }; - v2m_flash_gpios: sys_flash { - compatible = "arm,vexpress-sysreg,sys_flash"; - gpio-controller; - #gpio-cells = <2>; + v2m_sysctl: sysctl@1000 { + compatible = "arm,sp810", "arm,primecell"; + reg = <0x01000 0x1000>; + clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>; + clock-names = "refclk", "timclk", "apb_pclk"; + #clock-cells = <1>; + clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; + assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>; + assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>; }; - }; - v2m_sysctl: sysctl@1000 { - compatible = "arm,sp810", "arm,primecell"; - reg = <0x01000 0x1000>; - clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>; - clock-names = "refclk", "timclk", "apb_pclk"; - #clock-cells = <1>; - clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; - assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>; - assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>; - }; + /* PCI-E I2C bus */ + v2m_i2c_pcie: i2c@2000 { + compatible = "arm,versatile-i2c"; + reg = <0x02000 0x1000>; - /* PCI-E I2C bus */ - v2m_i2c_pcie: i2c@2000 { - compatible = "arm,versatile-i2c"; - reg = <0x02000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; - #address-cells = <1>; - #size-cells = <0>; + pcie-switch@60 { + compatible = "idt,89hpes32h8"; + reg = <0x60>; + }; + }; - pcie-switch@60 { - compatible = "idt,89hpes32h8"; - reg = <0x60>; + aaci@4000 { + compatible = "arm,pl041", "arm,primecell"; + reg = <0x04000 0x1000>; + interrupts = <11>; + clocks = <&smbclk>; + clock-names = "apb_pclk"; }; - }; - aaci@4000 { - compatible = "arm,pl041", "arm,primecell"; - reg = <0x04000 0x1000>; - interrupts = <11>; - clocks = <&smbclk>; - clock-names = "apb_pclk"; - }; + mmci@5000 { + compatible = "arm,pl180", "arm,primecell"; + reg = <0x05000 0x1000>; + interrupts = <9 10>; + cd-gpios = <&v2m_mmc_gpios 0 0>; + wp-gpios = <&v2m_mmc_gpios 1 0>; + max-frequency = <12000000>; + vmmc-supply = <&v2m_fixed_3v3>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "mclk", "apb_pclk"; + }; - mmci@5000 { - compatible = "arm,pl180", "arm,primecell"; - reg = <0x05000 0x1000>; - interrupts = <9 10>; - cd-gpios = <&v2m_mmc_gpios 0 0>; - wp-gpios = <&v2m_mmc_gpios 1 0>; - max-frequency = <12000000>; - vmmc-supply = <&v2m_fixed_3v3>; - clocks = <&v2m_clk24mhz>, <&smbclk>; - clock-names = "mclk", "apb_pclk"; - }; + kmi@6000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x06000 0x1000>; + interrupts = <12>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; - kmi@6000 { - compatible = "arm,pl050", "arm,primecell"; - reg = <0x06000 0x1000>; - interrupts = <12>; - clocks = <&v2m_clk24mhz>, <&smbclk>; - clock-names = "KMIREFCLK", "apb_pclk"; - }; + kmi@7000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x07000 0x1000>; + interrupts = <13>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; - kmi@7000 { - compatible = "arm,pl050", "arm,primecell"; - reg = <0x07000 0x1000>; - interrupts = <13>; - clocks = <&v2m_clk24mhz>, <&smbclk>; - clock-names = "KMIREFCLK", "apb_pclk"; - }; + v2m_serial0: uart@9000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x09000 0x1000>; + interrupts = <5>; + clocks = <&v2m_oscclk2>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; + }; - v2m_serial0: uart@9000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x09000 0x1000>; - interrupts = <5>; - clocks = <&v2m_oscclk2>, <&smbclk>; - clock-names = "uartclk", "apb_pclk"; - }; + v2m_serial1: uart@a000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0a000 0x1000>; + interrupts = <6>; + clocks = <&v2m_oscclk2>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; + }; - v2m_serial1: uart@a000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0a000 0x1000>; - interrupts = <6>; - clocks = <&v2m_oscclk2>, <&smbclk>; - clock-names = "uartclk", "apb_pclk"; - }; + v2m_serial2: uart@b000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0b000 0x1000>; + interrupts = <7>; + clocks = <&v2m_oscclk2>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; + }; - v2m_serial2: uart@b000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0b000 0x1000>; - interrupts = <7>; - clocks = <&v2m_oscclk2>, <&smbclk>; - clock-names = "uartclk", "apb_pclk"; - }; + v2m_serial3: uart@c000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0c000 0x1000>; + interrupts = <8>; + clocks = <&v2m_oscclk2>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; + }; - v2m_serial3: uart@c000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0c000 0x1000>; - interrupts = <8>; - clocks = <&v2m_oscclk2>, <&smbclk>; - clock-names = "uartclk", "apb_pclk"; - }; + wdt@f000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x0f000 0x1000>; + interrupts = <0>; + clocks = <&v2m_refclk32khz>, <&smbclk>; + clock-names = "wdogclk", "apb_pclk"; + }; - wdt@f000 { - compatible = "arm,sp805", "arm,primecell"; - reg = <0x0f000 0x1000>; - interrupts = <0>; - clocks = <&v2m_refclk32khz>, <&smbclk>; - clock-names = "wdogclk", "apb_pclk"; - }; + v2m_timer01: timer@11000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x11000 0x1000>; + interrupts = <2>; + clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>; + clock-names = "timclken1", "timclken2", "apb_pclk"; + }; - v2m_timer01: timer@11000 { - compatible = "arm,sp804", "arm,primecell"; - reg = <0x11000 0x1000>; - interrupts = <2>; - clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>; - clock-names = "timclken1", "timclken2", "apb_pclk"; - }; + v2m_timer23: timer@12000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x12000 0x1000>; + interrupts = <3>; + clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>; + clock-names = "timclken1", "timclken2", "apb_pclk"; + }; - v2m_timer23: timer@12000 { - compatible = "arm,sp804", "arm,primecell"; - reg = <0x12000 0x1000>; - interrupts = <3>; - clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>; - clock-names = "timclken1", "timclken2", "apb_pclk"; - }; + /* DVI I2C bus */ + v2m_i2c_dvi: i2c@16000 { + compatible = "arm,versatile-i2c"; + reg = <0x16000 0x1000>; - /* DVI I2C bus */ - v2m_i2c_dvi: i2c@16000 { - compatible = "arm,versatile-i2c"; - reg = <0x16000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; - #address-cells = <1>; - #size-cells = <0>; + dvi-transmitter@39 { + compatible = "sil,sii9022-tpi", "sil,sii9022"; + reg = <0x39>; + }; - dvi-transmitter@39 { - compatible = "sil,sii9022-tpi", "sil,sii9022"; - reg = <0x39>; + dvi-transmitter@60 { + compatible = "sil,sii9022-cpi", "sil,sii9022"; + reg = <0x60>; + }; }; - dvi-transmitter@60 { - compatible = "sil,sii9022-cpi", "sil,sii9022"; - reg = <0x60>; + rtc@17000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0x17000 0x1000>; + interrupts = <4>; + clocks = <&smbclk>; + clock-names = "apb_pclk"; }; - }; - rtc@17000 { - compatible = "arm,pl031", "arm,primecell"; - reg = <0x17000 0x1000>; - interrupts = <4>; - clocks = <&smbclk>; - clock-names = "apb_pclk"; - }; - - compact-flash@1a000 { - compatible = "arm,vexpress-cf", "ata-generic"; - reg = <0x1a000 0x100 - 0x1a100 0xf00>; - reg-shift = <2>; - }; - - clcd@1f000 { - compatible = "arm,pl111", "arm,primecell"; - reg = <0x1f000 0x1000>; - interrupt-names = "combined"; - interrupts = <14>; - clocks = <&v2m_oscclk1>, <&smbclk>; - clock-names = "clcdclk", "apb_pclk"; - memory-region = <&v2m_video_ram>; - max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */ - - port { - v2m_clcd_pads: endpoint { - remote-endpoint = <&v2m_clcd_panel>; - arm,pl11x,tft-r0g0b0-pads = <0 8 16>; - }; + compact-flash@1a000 { + compatible = "arm,vexpress-cf", "ata-generic"; + reg = <0x1a000 0x100 + 0x1a100 0xf00>; + reg-shift = <2>; }; - panel { - compatible = "panel-dpi"; + clcd@1f000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x1f000 0x1000>; + interrupt-names = "combined"; + interrupts = <14>; + clocks = <&v2m_oscclk1>, <&smbclk>; + clock-names = "clcdclk", "apb_pclk"; + memory-region = <&v2m_video_ram>; + max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */ port { - v2m_clcd_panel: endpoint { - remote-endpoint = <&v2m_clcd_pads>; + v2m_clcd_pads: endpoint { + remote-endpoint = <&v2m_clcd_panel>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; }; }; - panel-timing { - clock-frequency = <25175000>; - hactive = <640>; - hback-porch = <40>; - hfront-porch = <24>; - hsync-len = <96>; - vactive = <480>; - vback-porch = <32>; - vfront-porch = <11>; - vsync-len = <2>; + panel { + compatible = "panel-dpi"; + + port { + v2m_clcd_panel: endpoint { + remote-endpoint = <&v2m_clcd_pads>; + }; + }; + + panel-timing { + clock-frequency = <25175000>; + hactive = <640>; + hback-porch = <40>; + hfront-porch = <24>; + hsync-len = <96>; + vactive = <480>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <2>; + }; }; }; }; - }; - v2m_fixed_3v3: fixed-regulator-0 { - compatible = "regulator-fixed"; - regulator-name = "3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + v2m_fixed_3v3: fixed-regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - v2m_clk24mhz: clk24mhz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000000>; - clock-output-names = "v2m:clk24mhz"; - }; + v2m_clk24mhz: clk24mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "v2m:clk24mhz"; + }; - v2m_refclk1mhz: refclk1mhz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <1000000>; - clock-output-names = "v2m:refclk1mhz"; - }; + v2m_refclk1mhz: refclk1mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + clock-output-names = "v2m:refclk1mhz"; + }; - v2m_refclk32khz: refclk32khz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "v2m:refclk32khz"; - }; + v2m_refclk32khz: refclk32khz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "v2m:refclk32khz"; + }; - leds { - compatible = "gpio-leds"; + leds { + compatible = "gpio-leds"; - user1 { - label = "v2m:green:user1"; - gpios = <&v2m_led_gpios 0 0>; - linux,default-trigger = "heartbeat"; - }; + user1 { + label = "v2m:green:user1"; + gpios = <&v2m_led_gpios 0 0>; + linux,default-trigger = "heartbeat"; + }; - user2 { - label = "v2m:green:user2"; - gpios = <&v2m_led_gpios 1 0>; - linux,default-trigger = "mmc0"; - }; + user2 { + label = "v2m:green:user2"; + gpios = <&v2m_led_gpios 1 0>; + linux,default-trigger = "mmc0"; + }; - user3 { - label = "v2m:green:user3"; - gpios = <&v2m_led_gpios 2 0>; - linux,default-trigger = "cpu0"; - }; + user3 { + label = "v2m:green:user3"; + gpios = <&v2m_led_gpios 2 0>; + linux,default-trigger = "cpu0"; + }; - user4 { - label = "v2m:green:user4"; - gpios = <&v2m_led_gpios 3 0>; - linux,default-trigger = "cpu1"; - }; + user4 { + label = "v2m:green:user4"; + gpios = <&v2m_led_gpios 3 0>; + linux,default-trigger = "cpu1"; + }; - user5 { - label = "v2m:green:user5"; - gpios = <&v2m_led_gpios 4 0>; - linux,default-trigger = "cpu2"; - }; + user5 { + label = "v2m:green:user5"; + gpios = <&v2m_led_gpios 4 0>; + linux,default-trigger = "cpu2"; + }; - user6 { - label = "v2m:green:user6"; - gpios = <&v2m_led_gpios 5 0>; - linux,default-trigger = "cpu3"; - }; + user6 { + label = "v2m:green:user6"; + gpios = <&v2m_led_gpios 5 0>; + linux,default-trigger = "cpu3"; + }; - user7 { - label = "v2m:green:user7"; - gpios = <&v2m_led_gpios 6 0>; - linux,default-trigger = "cpu4"; - }; + user7 { + label = "v2m:green:user7"; + gpios = <&v2m_led_gpios 6 0>; + linux,default-trigger = "cpu4"; + }; - user8 { - label = "v2m:green:user8"; - gpios = <&v2m_led_gpios 7 0>; - linux,default-trigger = "cpu5"; + user8 { + label = "v2m:green:user8"; + gpios = <&v2m_led_gpios 7 0>; + linux,default-trigger = "cpu5"; + }; }; - }; - mcc { - compatible = "arm,vexpress,config-bus"; - arm,vexpress,config-bridge = <&v2m_sysreg>; + mcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; - oscclk0 { - /* MCC static memory clock */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 0>; - freq-range = <25000000 60000000>; - #clock-cells = <0>; - clock-output-names = "v2m:oscclk0"; - }; + oscclk0 { + /* MCC static memory clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <25000000 60000000>; + #clock-cells = <0>; + clock-output-names = "v2m:oscclk0"; + }; - v2m_oscclk1: oscclk1 { - /* CLCD clock */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 1>; - freq-range = <23750000 65000000>; - #clock-cells = <0>; - clock-output-names = "v2m:oscclk1"; - }; + v2m_oscclk1: oscclk1 { + /* CLCD clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <23750000 65000000>; + #clock-cells = <0>; + clock-output-names = "v2m:oscclk1"; + }; - v2m_oscclk2: oscclk2 { - /* IO FPGA peripheral clock */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 2>; - freq-range = <24000000 24000000>; - #clock-cells = <0>; - clock-output-names = "v2m:oscclk2"; - }; + v2m_oscclk2: oscclk2 { + /* IO FPGA peripheral clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 2>; + freq-range = <24000000 24000000>; + #clock-cells = <0>; + clock-output-names = "v2m:oscclk2"; + }; - volt-vio { - /* Logic level voltage */ - compatible = "arm,vexpress-volt"; - arm,vexpress-sysreg,func = <2 0>; - regulator-name = "VIO"; - regulator-always-on; - label = "VIO"; - }; + volt-vio { + /* Logic level voltage */ + compatible = "arm,vexpress-volt"; + arm,vexpress-sysreg,func = <2 0>; + regulator-name = "VIO"; + regulator-always-on; + label = "VIO"; + }; - temp-mcc { - /* MCC internal operating temperature */ - compatible = "arm,vexpress-temp"; - arm,vexpress-sysreg,func = <4 0>; - label = "MCC"; - }; + temp-mcc { + /* MCC internal operating temperature */ + compatible = "arm,vexpress-temp"; + arm,vexpress-sysreg,func = <4 0>; + label = "MCC"; + }; - reset { - compatible = "arm,vexpress-reset"; - arm,vexpress-sysreg,func = <5 0>; - }; + reset { + compatible = "arm,vexpress-reset"; + arm,vexpress-sysreg,func = <5 0>; + }; - muxfpga { - compatible = "arm,vexpress-muxfpga"; - arm,vexpress-sysreg,func = <7 0>; - }; + muxfpga { + compatible = "arm,vexpress-muxfpga"; + arm,vexpress-sysreg,func = <7 0>; + }; - shutdown { - compatible = "arm,vexpress-shutdown"; - arm,vexpress-sysreg,func = <8 0>; - }; + shutdown { + compatible = "arm,vexpress-shutdown"; + arm,vexpress-sysreg,func = <8 0>; + }; - reboot { - compatible = "arm,vexpress-reboot"; - arm,vexpress-sysreg,func = <9 0>; - }; + reboot { + compatible = "arm,vexpress-reboot"; + arm,vexpress-sysreg,func = <9 0>; + }; - dvimode { - compatible = "arm,vexpress-dvimode"; - arm,vexpress-sysreg,func = <11 0>; + dvimode { + compatible = "arm,vexpress-dvimode"; + arm,vexpress-sysreg,func = <11 0>; + }; }; }; }; +};
\ No newline at end of file diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts index a8ac4e2ed290..3971427a105b 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts @@ -9,6 +9,7 @@ */ /dts-v1/; +#include "vexpress-v2m-rs1.dtsi" / { model = "V2P-CA15"; @@ -278,8 +279,6 @@ <0 0 40 &gic 0 40 4>, <0 0 41 &gic 0 41 4>, <0 0 42 &gic 0 42 4>; - - /include/ "vexpress-v2m-rs1.dtsi" }; site2: hsb@40000000 { diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index a4c7713edfcd..ac6b90e9d806 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -9,6 +9,7 @@ */ /dts-v1/; +#include "vexpress-v2m-rs1.dtsi" / { model = "V2P-CA15_CA7"; @@ -203,7 +204,7 @@ <1 10 0xf08>; }; - pmu_a15 { + pmu-a15 { compatible = "arm,cortex-a15-pmu"; interrupts = <0 68 4>, <0 69 4>; @@ -211,7 +212,7 @@ <&cpu1>; }; - pmu_a7 { + pmu-a7 { compatible = "arm,cortex-a7-pmu"; interrupts = <0 128 4>, <0 129 4>, @@ -584,7 +585,7 @@ }; }; - smb@8000000 { + smb: smb@8000000 { compatible = "simple-bus"; #address-cells = <2>; @@ -641,8 +642,6 @@ <0 0 40 &gic 0 40 4>, <0 0 41 &gic 0 41 4>, <0 0 42 &gic 0 42 4>; - - /include/ "vexpress-v2m-rs1.dtsi" }; site2: hsb@40000000 { diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts index 32f1906ffecf..e5b4a7570a01 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts @@ -9,6 +9,7 @@ */ /dts-v1/; +#include "vexpress-v2m-rs1.dtsi" / { model = "V2P-CA5s"; @@ -191,7 +192,7 @@ }; }; - smb@8000000 { + smb: smb@8000000 { compatible = "simple-bus"; #address-cells = <2>; @@ -248,8 +249,6 @@ <0 0 40 &gic 0 40 4>, <0 0 41 &gic 0 41 4>, <0 0 42 &gic 0 42 4>; - - /include/ "vexpress-v2m-rs1.dtsi" }; site2: hsb@40000000 { diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts index 5814460e0549..fc43873cbdff 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts @@ -9,6 +9,7 @@ */ /dts-v1/; +#include "vexpress-v2m.dtsi" / { model = "V2P-CA9"; @@ -301,7 +302,7 @@ }; }; - smb@4000000 { + smb: smb@4000000 { compatible = "simple-bus"; #address-cells = <2>; @@ -357,8 +358,6 @@ <0 0 40 &gic 0 40 4>, <0 0 41 &gic 0 41 4>, <0 0 42 &gic 0 42 4>; - - /include/ "vexpress-v2m.dtsi" }; site2: hsb@e0000000 { diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi index d8b2972527eb..e2da122a63f4 100644 --- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi @@ -117,7 +117,7 @@ clocks = <&clk16m>; spi-max-frequency = <10000000>; interrupt-parent = <&gpio1>; - interrupts = <11 GPIO_ACTIVE_LOW>; + interrupts = <11 IRQ_TYPE_EDGE_RISING>; }; }; diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts index 782b69a3acdf..bd79e00bf615 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts @@ -70,8 +70,6 @@ compatible = "marvell,mv88e6085"; pinctrl-0 = <&pinctrl_gpio_switch0>; pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; reg = <0>; dsa,member = <0 0>; interrupt-parent = <&gpio0>; @@ -156,8 +154,6 @@ compatible = "marvell,mv88e6085"; pinctrl-0 = <&pinctrl_gpio_switch1>; pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; reg = <0>; dsa,member = <0 1>; interrupt-parent = <&gpio0>; @@ -243,8 +239,6 @@ switch2: switch@0 { compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; reg = <0>; dsa,member = <0 2>; diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts index c6f134c78303..0b1e94c6f25b 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts @@ -69,8 +69,6 @@ compatible = "marvell,mv88e6190"; pinctrl-0 = <&pinctrl_gpio_switch0>; pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; reg = <0>; dsa,member = <0 0>; eeprom-length = <65536>; @@ -166,8 +164,6 @@ compatible = "marvell,mv88e6190"; pinctrl-0 = <&pinctrl_gpio_switch1>; pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; reg = <0>; dsa,member = <0 1>; eeprom-length = <65536>; diff --git a/arch/arm/boot/dts/vf610-zii-dev.dtsi b/arch/arm/boot/dts/vf610-zii-dev.dtsi index 4890b8a5aa44..5ae5abfe1d55 100644 --- a/arch/arm/boot/dts/vf610-zii-dev.dtsi +++ b/arch/arm/boot/dts/vf610-zii-dev.dtsi @@ -222,6 +222,10 @@ status = "okay"; }; +&tempsensor { + io-channels = <&adc0 16>; +}; + &iomuxc { pinctrl_adc0_ad5: adc0ad5grp { fsl,pins = < diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index c3f09b737924..d392794d9c13 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -84,7 +84,7 @@ mask = <0x1000>; }; - iio-hwmon { + tempsensor: iio-hwmon { compatible = "iio-hwmon"; io-channels = <&adc0 16>, <&adc1 16>; }; diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig index d90f61e6254f..d51cfda953d4 100644 --- a/arch/arm/mach-meson/Kconfig +++ b/arch/arm/mach-meson/Kconfig @@ -19,14 +19,7 @@ config MACH_MESON6 select MESON6_TIMER config MACH_MESON8 - bool "Amlogic Meson8 SoCs support" - default ARCH_MESON - select MESON6_TIMER - select COMMON_CLK_MESON8B - select MESON_IRQ_GPIO - -config MACH_MESON8B - bool "Amlogic Meson8b SoCs support" + bool "Amlogic Meson8, Meson8b and Meson8m2 SoCs support" default ARCH_MESON select MESON6_TIMER select COMMON_CLK_MESON8B diff --git a/arch/arm/mach-meson/meson.c b/arch/arm/mach-meson/meson.c index 4e2357178625..c8d99df32f9b 100644 --- a/arch/arm/mach-meson/meson.c +++ b/arch/arm/mach-meson/meson.c @@ -20,6 +20,7 @@ static const char * const meson_common_board_compat[] = { "amlogic,meson6", "amlogic,meson8", "amlogic,meson8b", + "amlogic,meson8m2", NULL, }; diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index 4aa50b9b26bc..3543bc324553 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -22,5 +22,6 @@ subdir-y += renesas subdir-y += rockchip subdir-y += socionext subdir-y += sprd +subdir-y += synaptics subdir-y += xilinx subdir-y += zte diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index 8bebe7da5ed9..c31f90a49481 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -6,10 +6,11 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-cc.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb -dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb -dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb diff --git a/arch/arm64/boot/dts/allwinner/axp803.dtsi b/arch/arm64/boot/dts/allwinner/axp803.dtsi index ff8af52743ff..e5eae8bafc42 100644 --- a/arch/arm64/boot/dts/allwinner/axp803.dtsi +++ b/arch/arm64/boot/dts/allwinner/axp803.dtsi @@ -146,5 +146,10 @@ regulator-max-microvolt = <3000000>; regulator-name = "rtc-ldo"; }; + + reg_drivevbus: drivevbus { + regulator-name = "drivevbus"; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts index 2250dec9974c..0716b1441187 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts @@ -86,6 +86,10 @@ }; }; +&ehci0 { + status = "okay"; +}; + &ehci1 { status = "okay"; }; @@ -155,6 +159,10 @@ status = "okay"; }; +&ohci0 { + status = "okay"; +}; + &ohci1 { status = "okay"; }; @@ -167,6 +175,7 @@ reg = <0x3a3>; interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */ }; }; @@ -254,6 +263,11 @@ regulator-name = "vcc-wifi-io"; }; +®_drivevbus { + regulator-name = "usb0-vbus"; + status = "okay"; +}; + ®_eldo1 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -294,6 +308,13 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ + usb0_vbus-supply = <®_drivevbus>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts new file mode 100644 index 000000000000..95e113ce8699 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +/dts-v1/; +#include "sun50i-h5.dtsi" +#include <arm/sunxi-libretech-all-h3-cc.dtsi> + +/ { + model = "Libre Computer Board ALL-H3-CC H5"; + compatible = "libretech,all-h3-cc-h5", "allwinner,sun50i-h5"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi index e237c05cfdb4..62d646baac3c 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi @@ -47,7 +47,7 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { compatible = "arm,cortex-a53", "arm,armv8"; device_type = "cpu"; reg = <0>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts index d36de5eb81f3..b6f2d6b2ecae 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts @@ -22,6 +22,16 @@ }; }; +&r_i2c { + status = "okay"; + + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + #clock-cells = <0>; + }; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_ph_pins>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index 56563150d61a..c72da8cd9ef5 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -4,6 +4,8 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/sun50i-h6-ccu.h> +#include <dt-bindings/reset/sun50i-h6-ccu.h> / { interrupt-parent = <&gic>; @@ -115,7 +117,7 @@ <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu 26>, <&osc24M>, <&osc32k>; + clocks = <&ccu CLK_APB1>, <&osc24M>, <&osc32k>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; @@ -134,8 +136,8 @@ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&ccu 70>; - resets = <&ccu 21>; + clocks = <&ccu CLK_BUS_UART0>; + resets = <&ccu RST_BUS_UART0>; status = "disabled"; }; @@ -145,8 +147,8 @@ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&ccu 71>; - resets = <&ccu 22>; + clocks = <&ccu CLK_BUS_UART1>; + resets = <&ccu RST_BUS_UART1>; status = "disabled"; }; @@ -156,8 +158,8 @@ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&ccu 72>; - resets = <&ccu 23>; + clocks = <&ccu CLK_BUS_UART2>; + resets = <&ccu RST_BUS_UART2>; status = "disabled"; }; @@ -167,9 +169,59 @@ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&ccu 73>; - resets = <&ccu 24>; + clocks = <&ccu CLK_BUS_UART3>; + resets = <&ccu RST_BUS_UART3>; status = "disabled"; }; + + r_ccu: clock@7010000 { + compatible = "allwinner,sun50i-h6-r-ccu"; + reg = <0x07010000 0x400>; + clocks = <&osc24M>, <&osc32k>, <&iosc>, + <&ccu CLK_PLL_PERIPH0>; + clock-names = "hosc", "losc", "iosc", "pll-periph"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + r_intc: interrupt-controller@7021000 { + compatible = "allwinner,sun50i-h6-r-intc", + "allwinner,sun6i-a31-r-intc"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x07021000 0x400>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + }; + + r_pio: pinctrl@7022000 { + compatible = "allwinner,sun50i-h6-r-pinctrl"; + reg = <0x07022000 0x400>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&r_ccu 2>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <3>; + + r_i2c_pins: r-i2c { + pins = "PL0", "PL1"; + function = "s_i2c"; + }; + }; + + r_i2c: i2c@7081400 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x07081400 0x400>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&r_ccu 8>; + resets = <&r_ccu 4>; + pinctrl-names = "default"; + pinctrl-0 = <&r_i2c_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts index 57eedced5a51..4b3331fbfe39 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts +++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts @@ -15,6 +15,53 @@ serial0 = &uart_AO; serial1 = &uart_A; }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */ + }; }; ðmac { @@ -47,3 +94,62 @@ pinctrl-0 = <&i2c1_z_pins>; pinctrl-names = "default"; }; + +&i2c_AO { + status = "okay"; + pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>; + pinctrl-names = "default"; +}; + +&pwm_ab { + status = "okay"; + pinctrl-0 = <&pwm_a_x20_pins>; + pinctrl-names = "default"; +}; + +/* emmc storage */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <180000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* wifi module */ +&sd_emmc_b { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + non-removable; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index b58808eb3cc8..fee87737a201 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -7,6 +7,9 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/axg-clkc.h> +#include <dt-bindings/clock/axg-aoclkc.h> +#include <dt-bindings/gpio/meson-axg-gpio.h> +#include <dt-bindings/reset/amlogic,meson-axg-reset.h> / { compatible = "amlogic,meson-axg"; @@ -107,12 +110,51 @@ #clock-cells = <0>; }; + ao_alt_xtal: ao_alt_xtal-clk { + compatible = "fixed-clock"; + clock-frequency = <32000000>; + clock-output-names = "ao_alt_xtal"; + #clock-cells = <0>; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; ranges; + apb: apb@ffe00000 { + compatible = "simple-bus"; + reg = <0x0 0xffe00000 0x0 0x200000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>; + + sd_emmc_b: sd@5000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0x5000 0x0 0x2000>; + interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&clkc CLKID_SD_EMMC_B>, + <&clkc CLKID_SD_EMMC_B_CLK0>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_B>; + }; + + sd_emmc_c: mmc@7000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0x7000 0x0 0x2000>; + interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&clkc CLKID_SD_EMMC_C>, + <&clkc CLKID_SD_EMMC_C_CLK0>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_C>; + }; + }; + cbus: bus@ffd00000 { compatible = "simple-bus"; reg = <0x0 0xffd00000 0x0 0x25000>; @@ -120,6 +162,15 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>; + gpio_intc: interrupt-controller@f080 { + compatible = "amlogic,meson-gpio-intc"; + reg = <0x0 0xf080 0x0 0x10>; + interrupt-controller; + #interrupt-cells = <2>; + amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; + status = "disabled"; + }; + pwm_ab: pwm@1b000 { compatible = "amlogic,meson-axg-ee-pwm"; reg = <0x0 0x1b000 0x0 0x20>; @@ -164,50 +215,42 @@ i2c0: i2c@1f000 { compatible = "amlogic,meson-axg-i2c"; - status = "disabled"; reg = <0x0 0x1f000 0x0 0x20>; - interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_I2C>; #address-cells = <1>; #size-cells = <0>; - clocks = <&clkc CLKID_I2C>; - clock-names = "clk_i2c"; + status = "disabled"; }; i2c1: i2c@1e000 { compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x1e000 0x0 0x20>; + interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_I2C>; #address-cells = <1>; #size-cells = <0>; - reg = <0x0 0x1e000 0x0 0x20>; status = "disabled"; - interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc CLKID_I2C>; - clock-names = "clk_i2c"; }; i2c2: i2c@1d000 { compatible = "amlogic,meson-axg-i2c"; - status = "disabled"; reg = <0x0 0x1d000 0x0 0x20>; - interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 49 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_I2C>; #address-cells = <1>; #size-cells = <0>; - clocks = <&clkc CLKID_I2C>; - clock-names = "clk_i2c"; + status = "disabled"; }; i2c3: i2c@1c000 { compatible = "amlogic,meson-axg-i2c"; - status = "disabled"; reg = <0x0 0x1c000 0x0 0x20>; - interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_I2C>; #address-cells = <1>; #size-cells = <0>; - clocks = <&clkc CLKID_I2C>; - clock-names = "clk_i2c"; + status = "disabled"; }; uart_A: serial@24000 { @@ -262,10 +305,14 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>; - clkc: clock-controller@0 { - compatible = "amlogic,axg-clkc"; - #clock-cells = <1>; - reg = <0x0 0x0 0x0 0x320>; + sysctrl: system-controller@0 { + compatible = "amlogic,meson-axg-hhi-sysctrl", "syscon", "simple-mfd"; + reg = <0 0 0 0x400>; + + clkc: clock-controller { + compatible = "amlogic,axg-clkc"; + #clock-cells = <1>; + }; }; }; @@ -309,6 +356,57 @@ gpio-ranges = <&pinctrl_periphs 0 0 86>; }; + emmc_pins: emmc { + mux { + groups = "emmc_nand_d0", + "emmc_nand_d1", + "emmc_nand_d2", + "emmc_nand_d3", + "emmc_nand_d4", + "emmc_nand_d5", + "emmc_nand_d6", + "emmc_nand_d7", + "emmc_clk", + "emmc_cmd", + "emmc_ds"; + function = "emmc"; + }; + }; + + emmc_clk_gate_pins: emmc_clk_gate { + mux { + groups = "BOOT_8"; + function = "gpio_periphs"; + }; + cfg-pull-down { + pins = "BOOT_8"; + bias-pull-down; + }; + }; + + sdio_pins: sdio { + mux { + groups = "sdio_d0", + "sdio_d1", + "sdio_d2", + "sdio_d3", + "sdio_cmd", + "sdio_clk"; + function = "sdio"; + }; + }; + + sdio_clk_gate_pins: sdio_clk_gate { + mux { + groups = "GPIOX_4"; + function = "gpio_periphs"; + }; + cfg-pull-down { + pins = "GPIOX_4"; + bias-pull-down; + }; + }; + eth_rmii_x_pins: eth-x-rmii { mux { groups = "eth_mdio_x", @@ -660,6 +758,251 @@ function = "uart_ao_b_z"; }; }; + + mclk_b_pins: mclk_b { + mux { + groups = "mclk_b"; + function = "mclk_b"; + }; + }; + + mclk_c_pins: mclk_c { + mux { + groups = "mclk_c"; + function = "mclk_c"; + }; + }; + + tdma_sclk_pins: tdma_sclk { + mux { + groups = "tdma_sclk"; + function = "tdma"; + }; + }; + + tdma_sclk_slv_pins: tdma_sclk_slv { + mux { + groups = "tdma_sclk_slv"; + function = "tdma"; + }; + }; + + tdma_fs_pins: tdma_fs { + mux { + groups = "tdma_fs"; + function = "tdma"; + }; + }; + + tdma_fs_slv_pins: tdma_fs_slv { + mux { + groups = "tdma_fs_slv"; + function = "tdma"; + }; + }; + + tdma_din0_pins: tdma_din0 { + mux { + groups = "tdma_din0"; + function = "tdma"; + }; + }; + + tdma_dout0_x14_pins: tdma_dout0_x14 { + mux { + groups = "tdma_dout0_x14"; + function = "tdma"; + }; + }; + + tdma_dout0_x15_pins: tdma_dout0_x15 { + mux { + groups = "tdma_dout0_x15"; + function = "tdma"; + }; + }; + + tdma_dout1_pins: tdma_dout1 { + mux { + groups = "tdma_dout1"; + function = "tdma"; + }; + }; + + tdma_din1_pins: tdma_din1 { + mux { + groups = "tdma_din1"; + function = "tdma"; + }; + }; + + tdmb_sclk_pins: tdmb_sclk { + mux { + groups = "tdmb_sclk"; + function = "tdmb"; + }; + }; + + tdmb_sclk_slv_pins: tdmb_sclk_slv { + mux { + groups = "tdmb_sclk_slv"; + function = "tdmb"; + }; + }; + + tdmb_fs_pins: tdmb_fs { + mux { + groups = "tdmb_fs"; + function = "tdmb"; + }; + }; + + tdmb_fs_slv_pins: tdmb_fs_slv { + mux { + groups = "tdmb_fs_slv"; + function = "tdmb"; + }; + }; + + tdmb_din0_pins: tdmb_din0 { + mux { + groups = "tdmb_din0"; + function = "tdmb"; + }; + }; + + tdmb_dout0_pins: tdmb_dout0 { + mux { + groups = "tdmb_dout0"; + function = "tdmb"; + }; + }; + + tdmb_din1_pins: tdmb_din1 { + mux { + groups = "tdmb_din1"; + function = "tdmb"; + }; + }; + + tdmb_dout1_pins: tdmb_dout1 { + mux { + groups = "tdmb_dout1"; + function = "tdmb"; + }; + }; + + tdmb_din2_pins: tdmb_din2 { + mux { + groups = "tdmb_din2"; + function = "tdmb"; + }; + }; + + tdmb_dout2_pins: tdmb_dout2 { + mux { + groups = "tdmb_dout2"; + function = "tdmb"; + }; + }; + + tdmb_din3_pins: tdmb_din3 { + mux { + groups = "tdmb_din3"; + function = "tdmb"; + }; + }; + + tdmb_dout3_pins: tdmb_dout3 { + mux { + groups = "tdmb_dout3"; + function = "tdmb"; + }; + }; + + tdmc_sclk_pins: tdmc_sclk { + mux { + groups = "tdmc_sclk"; + function = "tdmc"; + }; + }; + + tdmc_sclk_slv_pins: tdmc_sclk_slv { + mux { + groups = "tdmc_sclk_slv"; + function = "tdmc"; + }; + }; + + tdmc_fs_pins: tdmc_fs { + mux { + groups = "tdmc_fs"; + function = "tdmc"; + }; + }; + + tdmc_fs_slv_pins: tdmc_fs_slv { + mux { + groups = "tdmc_fs_slv"; + function = "tdmc"; + }; + }; + + tdmc_din0_pins: tdmc_din0 { + mux { + groups = "tdmc_din0"; + function = "tdmc"; + }; + }; + + tdmc_dout0_pins: tdmc_dout0 { + mux { + groups = "tdmc_dout0"; + function = "tdmc"; + }; + }; + + tdmc_din1_pins: tdmc_din1 { + mux { + groups = "tdmc_din1"; + function = "tdmc"; + }; + }; + + tdmc_dout1_pins: tdmc_dout1 { + mux { + groups = "tdmc_dout1"; + function = "tdmc"; + }; + }; + + tdmc_din2_pins: tdmc_din2 { + mux { + groups = "tdmc_din2"; + function = "tdmc"; + }; + }; + + tdmc_dout2_pins: tdmc_dout2 { + mux { + groups = "tdmc_dout2"; + function = "tdmc"; + }; + }; + + tdmc_din3_pins: tdmc_din3 { + mux { + groups = "tdmc_din3"; + function = "tdmc"; + }; + }; + + tdmc_dout3_pins: tdmc_dout3 { + mux { + groups = "tdmc_dout3"; + function = "tdmc"; + }; + }; }; }; @@ -688,6 +1031,17 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>; + sysctrl_AO: sys-ctrl@0 { + compatible = "amlogic,meson-axg-ao-sysctrl", "syscon", "simple-mfd"; + reg = <0x0 0x0 0x0 0x100>; + + clkc_AO: clock-controller { + compatible = "amlogic,meson-axg-aoclkc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + }; + pinctrl_aobus: pinctrl@14 { compatible = "amlogic,meson-axg-aobus-pinctrl"; #address-cells = <2>; @@ -704,6 +1058,48 @@ gpio-ranges = <&pinctrl_aobus 0 0 15>; }; + i2c_ao_sck_4_pins: i2c_ao_sck_4 { + mux { + groups = "i2c_ao_sck_4"; + function = "i2c_ao"; + }; + }; + + i2c_ao_sck_8_pins: i2c_ao_sck_8 { + mux { + groups = "i2c_ao_sck_8"; + function = "i2c_ao"; + }; + }; + + i2c_ao_sck_10_pins: i2c_ao_sck_10 { + mux { + groups = "i2c_ao_sck_10"; + function = "i2c_ao"; + }; + }; + + i2c_ao_sda_5_pins: i2c_ao_sda_5 { + mux { + groups = "i2c_ao_sda_5"; + function = "i2c_ao"; + }; + }; + + i2c_ao_sda_9_pins: i2c_ao_sda_9 { + mux { + groups = "i2c_ao_sda_9"; + function = "i2c_ao"; + }; + }; + + i2c_ao_sda_11_pins: i2c_ao_sda_11 { + mux { + groups = "i2c_ao_sda_11"; + function = "i2c_ao"; + }; + }; + remote_input_ao_pins: remote_input_ao { mux { groups = "remote_input_ao"; @@ -766,20 +1162,19 @@ i2c_AO: i2c@5000 { compatible = "amlogic,meson-axg-i2c"; - status = "disabled"; reg = <0x0 0x05000 0x0 0x20>; interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_AO_I2C>; #address-cells = <1>; #size-cells = <0>; - clocks = <&clkc CLKID_I2C>; - clock-names = "clk_i2c"; + status = "disabled"; }; uart_AO: serial@3000 { compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x3000 0x0 0x18>; interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; + clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>; clock-names = "xtal", "pclk", "baud"; status = "disabled"; }; @@ -788,7 +1183,7 @@ compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x4000 0x0 0x18>; interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; + clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>; clock-names = "xtal", "pclk", "baud"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index 562c26a0ba33..98cbba6809ca 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -307,11 +307,10 @@ clock-names = "isfr", "iahb", "venci"; }; -&hiubus { - clkc: clock-controller@0 { +&sysctrl { + clkc: clock-controller { compatible = "amlogic,gxbb-clkc"; #clock-cells = <1>; - reg = <0x0 0x0 0x0 0x3db>; }; }; @@ -716,6 +715,7 @@ <&clkc CLKID_SD_EMMC_A_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_A>; }; &sd_emmc_b { @@ -723,6 +723,7 @@ <&clkc CLKID_SD_EMMC_B_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_B>; }; &sd_emmc_c { @@ -730,6 +731,7 @@ <&clkc CLKID_SD_EMMC_C_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_C>; }; &spicc { @@ -749,12 +751,12 @@ }; &uart_AO { - clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; + clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>; clock-names = "xtal", "pclk", "baud"; }; &uart_AO_B { - clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; + clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>; clock-names = "xtal", "pclk", "baud"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index dba365ed4bd5..27538eea547b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -267,11 +267,10 @@ clock-names = "isfr", "iahb", "venci"; }; -&hiubus { - clkc: clock-controller@0 { - compatible = "amlogic,gxl-clkc", "amlogic,gxbb-clkc"; +&sysctrl { + clkc: clock-controller { + compatible = "amlogic,gxl-clkc"; #clock-cells = <1>; - reg = <0x0 0x0 0x0 0x3db>; }; }; @@ -725,13 +724,15 @@ <&clkc CLKID_SD_EMMC_A_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_A>; }; &sd_emmc_b { clocks = <&clkc CLKID_SD_EMMC_B>, <&clkc CLKID_SD_EMMC_B_CLK0>, <&clkc CLKID_FCLK_DIV2>; - clock-names = "core", "clkin0", "clkin1"; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_B>; }; &sd_emmc_c { @@ -739,6 +740,7 @@ <&clkc CLKID_SD_EMMC_C_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_C>; }; &spicc { @@ -758,12 +760,12 @@ }; &uart_AO { - clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; + clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>; clock-names = "xtal", "pclk", "baud"; }; &uart_AO_B { - clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; + clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>; clock-names = "xtal", "pclk", "baud"; }; diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index eb749c50a736..ce56a4acda4f 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 #include "juno-clocks.dtsi" +#include "juno-motherboard.dtsi" / { /* @@ -572,14 +573,14 @@ thermal-sensors = <&scpi_sensors0 3>; }; - big_cluster_thermal_zone: big_cluster { + big_cluster_thermal_zone: big-cluster { polling-delay = <1000>; polling-delay-passive = <100>; thermal-sensors = <&scpi_sensors0 21>; status = "disabled"; }; - little_cluster_thermal_zone: little_cluster { + little_cluster_thermal_zone: little-cluster { polling-delay = <1000>; polling-delay-passive = <100>; thermal-sensors = <&scpi_sensors0 22>; @@ -677,7 +678,7 @@ clock-names = "pxlclk"; port { - hdlcd1_output: hdlcd1-endpoint { + hdlcd1_output: endpoint { remote-endpoint = <&tda998x_1_input>; }; }; @@ -692,7 +693,7 @@ clock-names = "pxlclk"; port { - hdlcd0_output: hdlcd0-endpoint { + hdlcd0_output: endpoint { remote-endpoint = <&tda998x_0_input>; }; }; @@ -720,7 +721,7 @@ compatible = "nxp,tda998x"; reg = <0x70>; port { - tda998x_0_input: tda998x-0-endpoint { + tda998x_0_input: endpoint { remote-endpoint = <&hdlcd0_output>; }; }; @@ -730,7 +731,7 @@ compatible = "nxp,tda998x"; reg = <0x71>; port { - tda998x_1_input: tda998x-1-endpoint { + tda998x_1_input: endpoint { remote-endpoint = <&hdlcd1_output>; }; }; @@ -795,8 +796,6 @@ <0 0 10 &gic 0 0 0 167 IRQ_TYPE_LEVEL_HIGH>, <0 0 11 &gic 0 0 0 168 IRQ_TYPE_LEVEL_HIGH>, <0 0 12 &gic 0 0 0 169 IRQ_TYPE_LEVEL_HIGH>; - - /include/ "juno-motherboard.dtsi" }; site2: tlx@60000000 { diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi index 69804c5f1197..1792b074e9a3 100644 --- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi @@ -7,6 +7,8 @@ * */ +/ { + smb@8000000 { mb_clk24mhz: clk24mhz { compatible = "fixed-clock"; #clock-cells = <0>; @@ -54,46 +56,46 @@ regulator-always-on; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; power-button { - debounce_interval = <50>; + debounce-interval = <50>; wakeup-source; linux,code = <116>; label = "POWER"; gpios = <&iofpga_gpio0 0 0x4>; }; home-button { - debounce_interval = <50>; + debounce-interval = <50>; wakeup-source; linux,code = <102>; label = "HOME"; gpios = <&iofpga_gpio0 1 0x4>; }; rlock-button { - debounce_interval = <50>; + debounce-interval = <50>; wakeup-source; linux,code = <152>; label = "RLOCK"; gpios = <&iofpga_gpio0 2 0x4>; }; vol-up-button { - debounce_interval = <50>; + debounce-interval = <50>; wakeup-source; linux,code = <115>; label = "VOL+"; gpios = <&iofpga_gpio0 3 0x4>; }; vol-down-button { - debounce_interval = <50>; + debounce-interval = <50>; wakeup-source; linux,code = <114>; label = "VOL-"; gpios = <&iofpga_gpio0 4 0x4>; }; nmi-button { - debounce_interval = <50>; + debounce-interval = <50>; wakeup-source; linux,code = <99>; label = "NMI"; @@ -287,3 +289,5 @@ }; }; }; + }; +}; diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts index aed6389468c4..2c5db03f226c 100644 --- a/arch/arm64/boot/dts/arm/juno-r1.dts +++ b/arch/arm64/boot/dts/arm/juno-r1.dts @@ -201,7 +201,7 @@ }; }; - pmu_a57 { + pmu-a57 { compatible = "arm,cortex-a57-pmu"; interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>; @@ -209,7 +209,7 @@ <&A57_1>; }; - pmu_a53 { + pmu-a53 { compatible = "arm,cortex-a53-pmu"; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, @@ -278,6 +278,10 @@ remote-endpoint = <&csys2_funnel_out_port>; }; +&csys1_funnel_in_port0 { + remote-endpoint = <&stm_out_port>; +}; + &stm_out_port { remote-endpoint = <&csys1_funnel_in_port0>; }; diff --git a/arch/arm64/boot/dts/arm/juno-r2.dts b/arch/arm64/boot/dts/arm/juno-r2.dts index b39b6d6ec5aa..c51950f4a1b6 100644 --- a/arch/arm64/boot/dts/arm/juno-r2.dts +++ b/arch/arm64/boot/dts/arm/juno-r2.dts @@ -201,7 +201,7 @@ }; }; - pmu_a72 { + pmu-a72 { compatible = "arm,cortex-a72-pmu"; interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>; @@ -209,7 +209,7 @@ <&A72_1>; }; - pmu_a53 { + pmu-a53 { compatible = "arm,cortex-a53-pmu"; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, @@ -278,6 +278,10 @@ remote-endpoint = <&csys2_funnel_out_port>; }; +&csys1_funnel_in_port0 { + remote-endpoint = <&stm_out_port>; +}; + &stm_out_port { remote-endpoint = <&csys1_funnel_in_port0>; }; diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts index c9236c4b967d..2b2bf39c30ef 100644 --- a/arch/arm64/boot/dts/arm/juno.dts +++ b/arch/arm64/boot/dts/arm/juno.dts @@ -200,7 +200,7 @@ }; }; - pmu_a57 { + pmu-a57 { compatible = "arm,cortex-a57-pmu"; interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>; @@ -208,7 +208,7 @@ <&A57_1>; }; - pmu_a53 { + pmu-a53 { compatible = "arm,cortex-a53-pmu"; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts index 06c8117e812a..602f63f72c37 100644 --- a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts +++ b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts @@ -12,6 +12,8 @@ /memreserve/ 0x80000000 0x00010000; +#include "rtsm_ve-motherboard.dtsi" + / { model = "RTSM_VE_AEMv8A"; compatible = "arm,rtsm_ve,aemv8a", "arm,vexpress"; @@ -162,7 +164,5 @@ <0 0 40 &gic 0 40 4>, <0 0 41 &gic 0 41 4>, <0 0 42 &gic 0 42 4>; - - /include/ "rtsm_ve-motherboard.dtsi" }; }; diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi index 1134e5d8df18..d2dbc3f39263 100644 --- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi @@ -7,270 +7,273 @@ * * VEMotherBoard.lisa */ - - motherboard { - arm,v2m-memory-map = "rs1"; - compatible = "arm,vexpress,v2m-p1", "simple-bus"; - #address-cells = <2>; /* SMB chipselect number and offset */ - #size-cells = <1>; - #interrupt-cells = <1>; - ranges; - - flash@0,00000000 { - compatible = "arm,vexpress-flash", "cfi-flash"; - reg = <0 0x00000000 0x04000000>, - <4 0x00000000 0x04000000>; - bank-width = <4>; - }; - - v2m_video_ram: vram@2,00000000 { - compatible = "arm,vexpress-vram"; - reg = <2 0x00000000 0x00800000>; - }; - - ethernet@2,02000000 { - compatible = "smsc,lan91c111"; - reg = <2 0x02000000 0x10000>; - interrupts = <15>; - }; - - v2m_clk24mhz: clk24mhz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000000>; - clock-output-names = "v2m:clk24mhz"; - }; - - v2m_refclk1mhz: refclk1mhz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <1000000>; - clock-output-names = "v2m:refclk1mhz"; - }; - - v2m_refclk32khz: refclk32khz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "v2m:refclk32khz"; - }; - - iofpga@3,00000000 { - compatible = "simple-bus"; - #address-cells = <1>; +/ { + smb@8000000 { + motherboard { + arm,v2m-memory-map = "rs1"; + compatible = "arm,vexpress,v2m-p1", "simple-bus"; + #address-cells = <2>; /* SMB chipselect number and offset */ #size-cells = <1>; - ranges = <0 3 0 0x200000>; - - v2m_sysreg: sysreg@10000 { - compatible = "arm,vexpress-sysreg"; - reg = <0x010000 0x1000>; - gpio-controller; - #gpio-cells = <2>; + #interrupt-cells = <1>; + ranges; + + flash@0,00000000 { + compatible = "arm,vexpress-flash", "cfi-flash"; + reg = <0 0x00000000 0x04000000>, + <4 0x00000000 0x04000000>; + bank-width = <4>; }; - v2m_sysctl: sysctl@20000 { - compatible = "arm,sp810", "arm,primecell"; - reg = <0x020000 0x1000>; - clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>; - clock-names = "refclk", "timclk", "apb_pclk"; - #clock-cells = <1>; - clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; - assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>; - assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>; + v2m_video_ram: vram@2,00000000 { + compatible = "arm,vexpress-vram"; + reg = <2 0x00000000 0x00800000>; }; - aaci@40000 { - compatible = "arm,pl041", "arm,primecell"; - reg = <0x040000 0x1000>; - interrupts = <11>; - clocks = <&v2m_clk24mhz>; - clock-names = "apb_pclk"; + ethernet@2,02000000 { + compatible = "smsc,lan91c111"; + reg = <2 0x02000000 0x10000>; + interrupts = <15>; }; - mmci@50000 { - compatible = "arm,pl180", "arm,primecell"; - reg = <0x050000 0x1000>; - interrupts = <9 10>; - cd-gpios = <&v2m_sysreg 0 0>; - wp-gpios = <&v2m_sysreg 1 0>; - max-frequency = <12000000>; - vmmc-supply = <&v2m_fixed_3v3>; - clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; - clock-names = "mclk", "apb_pclk"; + v2m_clk24mhz: clk24mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "v2m:clk24mhz"; }; - kmi@60000 { - compatible = "arm,pl050", "arm,primecell"; - reg = <0x060000 0x1000>; - interrupts = <12>; - clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; - clock-names = "KMIREFCLK", "apb_pclk"; + v2m_refclk1mhz: refclk1mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + clock-output-names = "v2m:refclk1mhz"; }; - kmi@70000 { - compatible = "arm,pl050", "arm,primecell"; - reg = <0x070000 0x1000>; - interrupts = <13>; - clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; - clock-names = "KMIREFCLK", "apb_pclk"; + v2m_refclk32khz: refclk32khz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "v2m:refclk32khz"; }; - v2m_serial0: uart@90000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x090000 0x1000>; - interrupts = <5>; - clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; - clock-names = "uartclk", "apb_pclk"; - }; + iofpga@3,00000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 3 0 0x200000>; + + v2m_sysreg: sysreg@10000 { + compatible = "arm,vexpress-sysreg"; + reg = <0x010000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + }; - v2m_serial1: uart@a0000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0a0000 0x1000>; - interrupts = <6>; - clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; - clock-names = "uartclk", "apb_pclk"; - }; + v2m_sysctl: sysctl@20000 { + compatible = "arm,sp810", "arm,primecell"; + reg = <0x020000 0x1000>; + clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>; + clock-names = "refclk", "timclk", "apb_pclk"; + #clock-cells = <1>; + clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; + assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>; + assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>; + }; - v2m_serial2: uart@b0000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0b0000 0x1000>; - interrupts = <7>; - clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; - clock-names = "uartclk", "apb_pclk"; - }; + aaci@40000 { + compatible = "arm,pl041", "arm,primecell"; + reg = <0x040000 0x1000>; + interrupts = <11>; + clocks = <&v2m_clk24mhz>; + clock-names = "apb_pclk"; + }; - v2m_serial3: uart@c0000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0c0000 0x1000>; - interrupts = <8>; - clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; - clock-names = "uartclk", "apb_pclk"; - }; + mmci@50000 { + compatible = "arm,pl180", "arm,primecell"; + reg = <0x050000 0x1000>; + interrupts = <9 10>; + cd-gpios = <&v2m_sysreg 0 0>; + wp-gpios = <&v2m_sysreg 1 0>; + max-frequency = <12000000>; + vmmc-supply = <&v2m_fixed_3v3>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "mclk", "apb_pclk"; + }; - wdt@f0000 { - compatible = "arm,sp805", "arm,primecell"; - reg = <0x0f0000 0x1000>; - interrupts = <0>; - clocks = <&v2m_refclk32khz>, <&v2m_clk24mhz>; - clock-names = "wdogclk", "apb_pclk"; - }; + kmi@60000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x060000 0x1000>; + interrupts = <12>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; - v2m_timer01: timer@110000 { - compatible = "arm,sp804", "arm,primecell"; - reg = <0x110000 0x1000>; - interrupts = <2>; - clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_clk24mhz>; - clock-names = "timclken1", "timclken2", "apb_pclk"; - }; + kmi@70000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x070000 0x1000>; + interrupts = <13>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; - v2m_timer23: timer@120000 { - compatible = "arm,sp804", "arm,primecell"; - reg = <0x120000 0x1000>; - interrupts = <3>; - clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&v2m_clk24mhz>; - clock-names = "timclken1", "timclken2", "apb_pclk"; - }; + v2m_serial0: uart@90000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x090000 0x1000>; + interrupts = <5>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "uartclk", "apb_pclk"; + }; - rtc@170000 { - compatible = "arm,pl031", "arm,primecell"; - reg = <0x170000 0x1000>; - interrupts = <4>; - clocks = <&v2m_clk24mhz>; - clock-names = "apb_pclk"; - }; + v2m_serial1: uart@a0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0a0000 0x1000>; + interrupts = <6>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "uartclk", "apb_pclk"; + }; - clcd@1f0000 { - compatible = "arm,pl111", "arm,primecell"; - reg = <0x1f0000 0x1000>; - interrupt-names = "combined"; - interrupts = <14>; - clocks = <&v2m_oscclk1>, <&v2m_clk24mhz>; - clock-names = "clcdclk", "apb_pclk"; - arm,pl11x,framebuffer = <0x18000000 0x00180000>; - memory-region = <&v2m_video_ram>; - max-memory-bandwidth = <130000000>; /* 16bpp @ 63.5MHz */ - - port { - v2m_clcd_pads: endpoint { - remote-endpoint = <&v2m_clcd_panel>; - arm,pl11x,tft-r0g0b0-pads = <0 8 16>; - }; + v2m_serial2: uart@b0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0b0000 0x1000>; + interrupts = <7>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "uartclk", "apb_pclk"; }; - panel { - compatible = "panel-dpi"; + v2m_serial3: uart@c0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0c0000 0x1000>; + interrupts = <8>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + wdt@f0000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x0f0000 0x1000>; + interrupts = <0>; + clocks = <&v2m_refclk32khz>, <&v2m_clk24mhz>; + clock-names = "wdogclk", "apb_pclk"; + }; + + v2m_timer01: timer@110000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x110000 0x1000>; + interrupts = <2>; + clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_clk24mhz>; + clock-names = "timclken1", "timclken2", "apb_pclk"; + }; + + v2m_timer23: timer@120000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x120000 0x1000>; + interrupts = <3>; + clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&v2m_clk24mhz>; + clock-names = "timclken1", "timclken2", "apb_pclk"; + }; + + rtc@170000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0x170000 0x1000>; + interrupts = <4>; + clocks = <&v2m_clk24mhz>; + clock-names = "apb_pclk"; + }; + + clcd@1f0000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x1f0000 0x1000>; + interrupt-names = "combined"; + interrupts = <14>; + clocks = <&v2m_oscclk1>, <&v2m_clk24mhz>; + clock-names = "clcdclk", "apb_pclk"; + arm,pl11x,framebuffer = <0x18000000 0x00180000>; + memory-region = <&v2m_video_ram>; + max-memory-bandwidth = <130000000>; /* 16bpp @ 63.5MHz */ port { - v2m_clcd_panel: endpoint { - remote-endpoint = <&v2m_clcd_pads>; + v2m_clcd_pads: endpoint { + remote-endpoint = <&v2m_clcd_panel>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; }; }; - panel-timing { - clock-frequency = <63500127>; - hactive = <1024>; - hback-porch = <152>; - hfront-porch = <48>; - hsync-len = <104>; - vactive = <768>; - vback-porch = <23>; - vfront-porch = <3>; - vsync-len = <4>; + panel { + compatible = "panel-dpi"; + + port { + v2m_clcd_panel: endpoint { + remote-endpoint = <&v2m_clcd_pads>; + }; + }; + + panel-timing { + clock-frequency = <63500127>; + hactive = <1024>; + hback-porch = <152>; + hfront-porch = <48>; + hsync-len = <104>; + vactive = <768>; + vback-porch = <23>; + vfront-porch = <3>; + vsync-len = <4>; + }; }; }; - }; - virtio-block@130000 { - compatible = "virtio,mmio"; - reg = <0x130000 0x200>; - interrupts = <42>; + virtio-block@130000 { + compatible = "virtio,mmio"; + reg = <0x130000 0x200>; + interrupts = <42>; + }; }; - }; - - v2m_fixed_3v3: v2m-3v3 { - compatible = "regulator-fixed"; - regulator-name = "3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - mcc { - compatible = "arm,vexpress,config-bus"; - arm,vexpress,config-bridge = <&v2m_sysreg>; - v2m_oscclk1: oscclk1 { - /* CLCD clock */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 1>; - freq-range = <23750000 63500000>; - #clock-cells = <0>; - clock-output-names = "v2m:oscclk1"; + v2m_fixed_3v3: v2m-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; }; - reset { - compatible = "arm,vexpress-reset"; - arm,vexpress-sysreg,func = <5 0>; - }; + mcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + v2m_oscclk1: oscclk1 { + /* CLCD clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <23750000 63500000>; + #clock-cells = <0>; + clock-output-names = "v2m:oscclk1"; + }; - muxfpga { - compatible = "arm,vexpress-muxfpga"; - arm,vexpress-sysreg,func = <7 0>; - }; + reset { + compatible = "arm,vexpress-reset"; + arm,vexpress-sysreg,func = <5 0>; + }; - shutdown { - compatible = "arm,vexpress-shutdown"; - arm,vexpress-sysreg,func = <8 0>; - }; + muxfpga { + compatible = "arm,vexpress-muxfpga"; + arm,vexpress-sysreg,func = <7 0>; + }; - reboot { - compatible = "arm,vexpress-reboot"; - arm,vexpress-sysreg,func = <9 0>; - }; + shutdown { + compatible = "arm,vexpress-shutdown"; + arm,vexpress-sysreg,func = <8 0>; + }; + + reboot { + compatible = "arm,vexpress-reboot"; + arm,vexpress-sysreg,func = <9 0>; + }; - dvimode { - compatible = "arm,vexpress-dvimode"; - arm,vexpress-sysreg,func = <11 0>; + dvimode { + compatible = "arm,vexpress-dvimode"; + arm,vexpress-sysreg,func = <11 0>; + }; }; }; }; +}; diff --git a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts index 1c9eadc2d71e..38880380e0fa 100644 --- a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts +++ b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts @@ -13,6 +13,7 @@ /dts-v1/; #include <dt-bindings/interrupt-controller/arm-gic.h> +#include "vexpress-v2m-rs1.dtsi" / { model = "V2F-1XV7 Cortex-A53x2 SMM"; @@ -129,7 +130,7 @@ }; }; - smb@8000000 { + smb: smb@8000000 { compatible = "simple-bus"; #address-cells = <2>; @@ -186,7 +187,5 @@ <0 0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, <0 0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, <0 0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; - - /include/ "vexpress-v2m-rs1.dtsi" }; }; diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile index 2a2591ef1fee..1193a9e34bbb 100644 --- a/arch/arm64/boot/dts/broadcom/Makefile +++ b/arch/arm64/boot/dts/broadcom/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 -dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb +dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb \ + bcm2837-rpi-3-b-plus.dtb subdir-y += northstar2 subdir-y += stingray diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts new file mode 100644 index 000000000000..46ad2023cccf --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts @@ -0,0 +1,2 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "arm/bcm2837-rpi-3-b-plus.dts" diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 1ad8677f6a0a..038c99792ccb 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -18,8 +18,8 @@ / { compatible = "samsung,exynos5433"; - #address-cells = <2>; - #size-cells = <2>; + #address-cells = <1>; + #size-cells = <1>; interrupt-parent = <&gic>; @@ -231,18 +231,11 @@ cpu_on = <0xC4000003>; }; - reboot: syscon-reboot { - compatible = "syscon-reboot"; - regmap = <&pmu_system_controller>; - offset = <0x400>; /* SWRESET */ - mask = <0x1>; - }; - soc: soc { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0x0 0x0 0x0 0x18000000>; + ranges; arm_a53_pmu { compatible = "arm,cortex-a53-pmu", "arm,armv8-pmuv3"; @@ -799,6 +792,13 @@ #clock-cells = <1>; clock-names = "clkout16"; clocks = <&xxti>; + + reboot: syscon-reboot { + compatible = "syscon-reboot"; + regmap = <&pmu_system_controller>; + offset = <0x400>; /* SWRESET */ + mask = <0x1>; + }; }; gic: interrupt-controller@11001000 { @@ -829,11 +829,16 @@ <&cmu_disp CLK_ACLK_SMMU_DECON0X>, <&cmu_disp CLK_ACLK_XIU_DECON0X>, <&cmu_disp CLK_PCLK_SMMU_DECON0X>, + <&cmu_disp CLK_ACLK_SMMU_DECON1X>, + <&cmu_disp CLK_ACLK_XIU_DECON1X>, + <&cmu_disp CLK_PCLK_SMMU_DECON1X>, <&cmu_disp CLK_SCLK_DECON_VCLK>, <&cmu_disp CLK_SCLK_DECON_ECLK>; clock-names = "pclk", "aclk_decon", "aclk_smmu_decon0x", "aclk_xiu_decon0x", "pclk_smmu_decon0x", - "sclk_decon_vclk", "sclk_decon_eclk"; + "aclk_smmu_decon1x", "aclk_xiu_decon1x", + "pclk_smmu_decon1x", "sclk_decon_vclk", + "sclk_decon_eclk"; power-domains = <&pd_disp>; interrupt-names = "fifo", "vsync", "lcd_sys"; interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, @@ -866,11 +871,16 @@ <&cmu_disp CLK_ACLK_SMMU_TV0X>, <&cmu_disp CLK_ACLK_XIU_TV0X>, <&cmu_disp CLK_PCLK_SMMU_TV0X>, + <&cmu_disp CLK_ACLK_SMMU_TV1X>, + <&cmu_disp CLK_ACLK_XIU_TV1X>, + <&cmu_disp CLK_PCLK_SMMU_TV1X>, <&cmu_disp CLK_SCLK_DECON_TV_VCLK>, <&cmu_disp CLK_SCLK_DECON_TV_ECLK>; clock-names = "pclk", "aclk_decon", "aclk_smmu_decon0x", "aclk_xiu_decon0x", "pclk_smmu_decon0x", - "sclk_decon_vclk", "sclk_decon_eclk"; + "aclk_smmu_decon1x", "aclk_xiu_decon1x", + "pclk_smmu_decon1x", "sclk_decon_vclk", + "sclk_decon_eclk"; samsung,disp-sysreg = <&syscon_disp>; power-domains = <&pd_disp>; interrupt-names = "fifo", "vsync", "lcd_sys"; @@ -1034,6 +1044,30 @@ power-domains = <&pd_gscl>; }; + scaler_0: scaler@15000000 { + compatible = "samsung,exynos5433-scaler"; + reg = <0x15000000 0x1294>; + interrupts = <0 402 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "pclk", "aclk", "aclk_xiu"; + clocks = <&cmu_mscl CLK_PCLK_M2MSCALER0>, + <&cmu_mscl CLK_ACLK_M2MSCALER0>, + <&cmu_mscl CLK_ACLK_XIU_MSCLX>; + iommus = <&sysmmu_scaler_0>; + power-domains = <&pd_mscl>; + }; + + scaler_1: scaler@15010000 { + compatible = "samsung,exynos5433-scaler"; + reg = <0x15010000 0x1294>; + interrupts = <0 403 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "pclk", "aclk", "aclk_xiu"; + clocks = <&cmu_mscl CLK_PCLK_M2MSCALER1>, + <&cmu_mscl CLK_ACLK_M2MSCALER1>, + <&cmu_mscl CLK_ACLK_XIU_MSCLX>; + iommus = <&sysmmu_scaler_1>; + power-domains = <&pd_mscl>; + }; + jpeg: codec@15020000 { compatible = "samsung,exynos5433-jpeg"; reg = <0x15020000 0x10000>; @@ -1137,6 +1171,28 @@ power-domains = <&pd_gscl>; }; + sysmmu_scaler_0: sysmmu@0x15040000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x15040000 0x1000>; + interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "pclk", "aclk"; + clocks = <&cmu_mscl CLK_PCLK_SMMU_M2MSCALER0>, + <&cmu_mscl CLK_ACLK_SMMU_M2MSCALER0>; + #iommu-cells = <0>; + power-domains = <&pd_mscl>; + }; + + sysmmu_scaler_1: sysmmu@0x15050000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x15050000 0x1000>; + interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "pclk", "aclk"; + clocks = <&cmu_mscl CLK_PCLK_SMMU_M2MSCALER1>, + <&cmu_mscl CLK_ACLK_SMMU_M2MSCALER1>; + #iommu-cells = <0>; + power-domains = <&pd_mscl>; + }; + sysmmu_jpeg: sysmmu@15060000 { compatible = "samsung,exynos-sysmmu"; reg = <0x15060000 0x1000>; diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index ad9dce6894ce..93a84338938a 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -12,8 +12,8 @@ / { compatible = "samsung,exynos7"; interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; + #address-cells = <1>; + #size-cells = <1>; aliases { pinctrl0 = &pinctrl_alive; @@ -70,7 +70,7 @@ compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0 0 0 0x18000000>; + ranges; chipid@10000000 { compatible = "samsung,exynos4210-chipid"; @@ -494,13 +494,13 @@ pmu_system_controller: system-controller@105c0000 { compatible = "samsung,exynos7-pmu", "syscon"; reg = <0x105c0000 0x5000>; - }; - reboot: syscon-reboot { - compatible = "syscon-reboot"; - regmap = <&pmu_system_controller>; - offset = <0x0400>; - mask = <0x1>; + reboot: syscon-reboot { + compatible = "syscon-reboot"; + regmap = <&pmu_system_controller>; + offset = <0x0400>; + mask = <0x1>; + }; }; rtc: rtc@10590000 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi index bb788eddf9f4..205f0f4c5df0 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -53,11 +53,11 @@ aliases { crypto = &crypto; - rtic_a = &rtic_a; - rtic_b = &rtic_b; - rtic_c = &rtic_c; - rtic_d = &rtic_d; - sec_mon = &sec_mon; + rtic-a = &rtic_a; + rtic-b = &rtic_b; + rtic-c = &rtic_c; + rtic-d = &rtic_d; + sec-mon = &sec_mon; }; cpus { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi index 5498c705ae6a..061647bd97b8 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi @@ -134,7 +134,7 @@ &dspi { status = "okay"; - dflash0: n25q512a { + dflash0: n25q512a@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p80"; diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi index ec3eb8e33a3a..8d477dcbfa58 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/hi3660-clock.h> +#include <dt-bindings/thermal/thermal.h> / { compatible = "hisilicon,hi3660"; @@ -62,6 +63,10 @@ next-level-cache = <&A53_L2>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <592>; + clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>; + operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; + dynamic-power-coefficient = <110>; }; cpu1: cpu@1 { @@ -72,6 +77,8 @@ next-level-cache = <&A53_L2>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <592>; + clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>; + operating-points-v2 = <&cluster0_opp>; }; cpu2: cpu@2 { @@ -82,6 +89,8 @@ next-level-cache = <&A53_L2>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <592>; + clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>; + operating-points-v2 = <&cluster0_opp>; }; cpu3: cpu@3 { @@ -92,6 +101,8 @@ next-level-cache = <&A53_L2>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <592>; + clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>; + operating-points-v2 = <&cluster0_opp>; }; cpu4: cpu@100 { @@ -102,6 +113,10 @@ next-level-cache = <&A73_L2>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>; capacity-dmips-mhz = <1024>; + clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>; + operating-points-v2 = <&cluster1_opp>; + #cooling-cells = <2>; + dynamic-power-coefficient = <550>; }; cpu5: cpu@101 { @@ -112,6 +127,8 @@ next-level-cache = <&A73_L2>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>; capacity-dmips-mhz = <1024>; + clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>; + operating-points-v2 = <&cluster1_opp>; }; cpu6: cpu@102 { @@ -122,6 +139,8 @@ next-level-cache = <&A73_L2>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>; capacity-dmips-mhz = <1024>; + clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>; + operating-points-v2 = <&cluster1_opp>; }; cpu7: cpu@103 { @@ -132,6 +151,8 @@ next-level-cache = <&A73_L2>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>; capacity-dmips-mhz = <1024>; + clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>; + operating-points-v2 = <&cluster1_opp>; }; idle-states { @@ -174,6 +195,76 @@ }; }; + cluster0_opp: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp00 { + opp-hz = /bits/ 64 <533000000>; + opp-microvolt = <700000>; + clock-latency-ns = <300000>; + }; + + opp01 { + opp-hz = /bits/ 64 <999000000>; + opp-microvolt = <800000>; + clock-latency-ns = <300000>; + }; + + opp02 { + opp-hz = /bits/ 64 <1402000000>; + opp-microvolt = <900000>; + clock-latency-ns = <300000>; + }; + + opp03 { + opp-hz = /bits/ 64 <1709000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <300000>; + }; + + opp04 { + opp-hz = /bits/ 64 <1844000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <300000>; + }; + }; + + cluster1_opp: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp10 { + opp-hz = /bits/ 64 <903000000>; + opp-microvolt = <700000>; + clock-latency-ns = <300000>; + }; + + opp11 { + opp-hz = /bits/ 64 <1421000000>; + opp-microvolt = <800000>; + clock-latency-ns = <300000>; + }; + + opp12 { + opp-hz = /bits/ 64 <1805000000>; + opp-microvolt = <900000>; + clock-latency-ns = <300000>; + }; + + opp13 { + opp-hz = /bits/ 64 <2112000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <300000>; + }; + + opp14 { + opp-hz = /bits/ 64 <2362000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <300000>; + }; + }; + gic: interrupt-controller@e82b0000 { compatible = "arm,gic-400"; reg = <0x0 0xe82b1000 0 0x1000>, /* GICD */ @@ -274,6 +365,21 @@ #reset-cells = <2>; }; + mailbox: mailbox@e896b000 { + compatible = "hisilicon,hi3660-mbox"; + reg = <0x0 0xe896b000 0x0 0x1000>; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <3>; + }; + + stub_clock: stub_clock@e896b500 { + compatible = "hisilicon,hi3660-stub-clk"; + reg = <0x0 0xe896b500 0x0 0x0100>; + #clock-cells = <1>; + mboxes = <&mailbox 13 3 0>; + }; + dual_timer0: timer@fff14000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x0 0xfff14000 0x0 0x1000>; @@ -872,6 +978,8 @@ 0x0 0x02000000>; num-lanes = <1>; #interrupt-cells = <1>; + interrupts = <0 283 4>; + interrupt-names = "msi"; interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = <0x0 0 0 1 &gic GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, @@ -972,5 +1080,44 @@ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; #thermal-sensor-cells = <1>; }; + + thermal-zones { + + cls0: cls0 { + polling-delay = <1000>; + polling-delay-passive = <100>; + sustainable-power = <4500>; + + /* sensor ID */ + thermal-sensors = <&tsensor 1>; + + trips { + threshold: trip-point@0 { + temperature = <65000>; + hysteresis = <1000>; + type = "passive"; + }; + + target: trip-point@1 { + temperature = <75000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + + cooling-maps { + map0 { + trip = <&target>; + contribution = <1024>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&target>; + contribution = <512>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts index 4d5d644abb12..d30f6eb8a5ee 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts @@ -11,6 +11,7 @@ #include <dt-bindings/gpio/gpio.h> #include "hi3798cv200.dtsi" +#include "poplar-pinctrl.dtsi" / { model = "HiSilicon Poplar Development Board"; @@ -61,6 +62,33 @@ default-state = "off"; }; }; + + reg_pcie: regulator-pcie { + compatible = "regulator-fixed"; + regulator-name = "3V3_PCIE0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio6 7 0>; + enable-active-high; + }; +}; + +&ehci { + status = "okay"; +}; + +&emmc { + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins_1 &emmc_pins_2 + &emmc_pins_3 &emmc_pins_4>; + fifo-depth = <256>; + clock-frequency = <200000000>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + non-removable; + bus-width = <8>; + status = "okay"; }; &gmac1 { @@ -146,6 +174,16 @@ status = "okay"; }; +&ohci { + status = "okay"; +}; + +&pcie { + reset-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; + vpcie-supply = <®_pcie>; + status = "okay"; +}; + &sd0 { bus-width = <4>; cap-sd-highspeed; diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi index 962bd79139e4..7c0fddd7c8cf 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi @@ -8,7 +8,9 @@ */ #include <dt-bindings/clock/histb-clock.h> +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/phy/phy.h> #include <dt-bindings/reset/ti-syscon.h> / { @@ -106,6 +108,113 @@ #reset-cells = <2>; }; + perictrl: peripheral-controller@8a20000 { + compatible = "hisilicon,hi3798cv200-perictrl", "syscon", + "simple-mfd"; + reg = <0x8a20000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8a20000 0x1000>; + + usb2_phy1: usb2-phy@120 { + compatible = "hisilicon,hi3798cv200-usb2-phy"; + reg = <0x120 0x4>; + clocks = <&crg HISTB_USB2_PHY1_REF_CLK>; + resets = <&crg 0xbc 4>; + #address-cells = <1>; + #size-cells = <0>; + + usb2_phy1_port0: phy@0 { + reg = <0>; + #phy-cells = <0>; + resets = <&crg 0xbc 8>; + }; + + usb2_phy1_port1: phy@1 { + reg = <1>; + #phy-cells = <0>; + resets = <&crg 0xbc 9>; + }; + }; + + usb2_phy2: usb2-phy@124 { + compatible = "hisilicon,hi3798cv200-usb2-phy"; + reg = <0x124 0x4>; + clocks = <&crg HISTB_USB2_PHY2_REF_CLK>; + resets = <&crg 0xbc 6>; + #address-cells = <1>; + #size-cells = <0>; + + usb2_phy2_port0: phy@0 { + reg = <0>; + #phy-cells = <0>; + resets = <&crg 0xbc 10>; + }; + }; + + combphy0: phy@850 { + compatible = "hisilicon,hi3798cv200-combphy"; + reg = <0x850 0x8>; + #phy-cells = <1>; + clocks = <&crg HISTB_COMBPHY0_CLK>; + resets = <&crg 0x188 4>; + assigned-clocks = <&crg HISTB_COMBPHY0_CLK>; + assigned-clock-rates = <100000000>; + hisilicon,fixed-mode = <PHY_TYPE_USB3>; + }; + + combphy1: phy@858 { + compatible = "hisilicon,hi3798cv200-combphy"; + reg = <0x858 0x8>; + #phy-cells = <1>; + clocks = <&crg HISTB_COMBPHY1_CLK>; + resets = <&crg 0x188 12>; + assigned-clocks = <&crg HISTB_COMBPHY1_CLK>; + assigned-clock-rates = <100000000>; + hisilicon,mode-select-bits = <0x0008 11 (0x3 << 11)>; + }; + }; + + pmx0: pinconf@8a21000 { + compatible = "pinconf-single"; + reg = <0x8a21000 0x180>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <7>; + pinctrl-single,gpio-range = < + &range 0 8 2 /* GPIO 0 */ + &range 8 1 0 /* GPIO 1 */ + &range 9 4 2 + &range 13 1 0 + &range 14 1 1 + &range 15 1 0 + &range 16 5 0 /* GPIO 2 */ + &range 21 3 1 + &range 24 4 1 /* GPIO 3 */ + &range 28 2 2 + &range 86 1 1 + &range 87 1 0 + &range 30 4 2 /* GPIO 4 */ + &range 34 3 0 + &range 37 1 2 + &range 38 3 2 /* GPIO 6 */ + &range 41 5 0 + &range 46 8 1 /* GPIO 7 */ + &range 54 8 1 /* GPIO 8 */ + &range 64 7 1 /* GPIO 9 */ + &range 71 1 0 + &range 72 6 1 /* GPIO 10 */ + &range 78 1 0 + &range 79 1 1 + &range 80 6 1 /* GPIO 11 */ + &range 70 2 1 + &range 88 8 0 /* GPIO 12 */ + >; + + range: gpio-range { + #pinctrl-single,gpio-range-cells = <3>; + }; + }; + uart0: serial@8b00000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x8b00000 0x1000>; @@ -205,12 +314,17 @@ }; emmc: mmc@9830000 { - compatible = "snps,dw-mshc"; + compatible = "hisilicon,hi3798cv200-dw-mshc"; reg = <0x9830000 0x10000>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; clocks = <&crg HISTB_MMC_CIU_CLK>, - <&crg HISTB_MMC_BIU_CLK>; - clock-names = "ciu", "biu"; + <&crg HISTB_MMC_BIU_CLK>, + <&crg HISTB_MMC_SAMPLE_CLK>, + <&crg HISTB_MMC_DRV_CLK>; + clock-names = "ciu", "biu", "ciu-sample", "ciu-drive"; + resets = <&crg 0xa0 4>; + reset-names = "reset"; + status = "disabled"; }; gpio0: gpio@8b20000 { @@ -221,6 +335,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&pmx0 0 0 8>; clocks = <&crg HISTB_APB_CLK>; clock-names = "apb_pclk"; status = "disabled"; @@ -234,6 +349,13 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = < + &pmx0 0 8 1 + &pmx0 1 9 4 + &pmx0 5 13 1 + &pmx0 6 14 1 + &pmx0 7 15 1 + >; clocks = <&crg HISTB_APB_CLK>; clock-names = "apb_pclk"; status = "disabled"; @@ -247,6 +369,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&pmx0 0 16 5 &pmx0 5 21 3>; clocks = <&crg HISTB_APB_CLK>; clock-names = "apb_pclk"; status = "disabled"; @@ -260,6 +383,12 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = < + &pmx0 0 24 4 + &pmx0 4 28 2 + &pmx0 6 86 1 + &pmx0 7 87 1 + >; clocks = <&crg HISTB_APB_CLK>; clock-names = "apb_pclk"; status = "disabled"; @@ -273,6 +402,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&pmx0 0 30 4 &pmx0 4 34 3 &pmx0 7 37 1>; clocks = <&crg HISTB_APB_CLK>; clock-names = "apb_pclk"; status = "disabled"; @@ -299,6 +429,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&pmx0 0 38 3 &pmx0 0 41 5>; clocks = <&crg HISTB_APB_CLK>; clock-names = "apb_pclk"; status = "disabled"; @@ -312,6 +443,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&pmx0 0 46 8>; clocks = <&crg HISTB_APB_CLK>; clock-names = "apb_pclk"; status = "disabled"; @@ -325,6 +457,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&pmx0 0 54 8>; clocks = <&crg HISTB_APB_CLK>; clock-names = "apb_pclk"; status = "disabled"; @@ -338,6 +471,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&pmx0 0 64 7 &pmx0 71 1>; clocks = <&crg HISTB_APB_CLK>; clock-names = "apb_pclk"; status = "disabled"; @@ -351,6 +485,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&pmx0 0 72 6 &pmx0 6 78 1 &pmx0 7 79 1>; clocks = <&crg HISTB_APB_CLK>; clock-names = "apb_pclk"; status = "disabled"; @@ -364,6 +499,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&pmx0 0 80 6 &pmx0 6 70 2>; clocks = <&crg HISTB_APB_CLK>; clock-names = "apb_pclk"; status = "disabled"; @@ -377,6 +513,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&pmx0 0 88 8>; clocks = <&crg HISTB_APB_CLK>; clock-names = "apb_pclk"; status = "disabled"; @@ -419,5 +556,67 @@ clocks = <&sysctrl HISTB_IR_CLK>; status = "disabled"; }; + + pcie: pcie@9860000 { + compatible = "hisilicon,hi3798cv200-pcie"; + reg = <0x9860000 0x1000>, + <0x0 0x2000>, + <0x2000000 0x01000000>; + reg-names = "control", "rc-dbi", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + bus-range = <0 15>; + num-lanes = <1>; + ranges = <0x81000000 0x0 0x00000000 0x4f00000 0x0 0x100000 + 0x82000000 0x0 0x3000000 0x3000000 0x0 0x01f00000>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic 0 131 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg HISTB_PCIE_AUX_CLK>, + <&crg HISTB_PCIE_PIPE_CLK>, + <&crg HISTB_PCIE_SYS_CLK>, + <&crg HISTB_PCIE_BUS_CLK>; + clock-names = "aux", "pipe", "sys", "bus"; + resets = <&crg 0x18c 6>, <&crg 0x18c 5>, <&crg 0x18c 4>; + reset-names = "soft", "sys", "bus"; + phys = <&combphy1 PHY_TYPE_PCIE>; + phy-names = "phy"; + status = "disabled"; + }; + + ohci: ohci@9880000 { + compatible = "generic-ohci"; + reg = <0x9880000 0x10000>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg HISTB_USB2_BUS_CLK>, + <&crg HISTB_USB2_12M_CLK>, + <&crg HISTB_USB2_48M_CLK>; + clock-names = "bus", "clk12", "clk48"; + resets = <&crg 0xb8 12>; + reset-names = "bus"; + phys = <&usb2_phy1_port0>; + phy-names = "usb"; + status = "disabled"; + }; + + ehci: ehci@9890000 { + compatible = "generic-ehci"; + reg = <0x9890000 0x10000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg HISTB_USB2_BUS_CLK>, + <&crg HISTB_USB2_PHY_CLK>, + <&crg HISTB_USB2_UTMI_CLK>; + clock-names = "bus", "phy", "utmi"; + resets = <&crg 0xb8 12>, + <&crg 0xb8 16>, + <&crg 0xb8 13>; + reset-names = "bus", "phy", "utmi"; + phys = <&usb2_phy1_port0>; + phy-names = "usb"; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts index 9af633021a42..a95c6f5619bf 100644 --- a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts +++ b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts @@ -25,6 +25,14 @@ chosen { }; }; +&ipmi0 { + status = "ok"; +}; + +&uart0 { + status = "ok"; +}; + ð0 { status = "ok"; }; diff --git a/arch/arm64/boot/dts/hisilicon/hip06.dtsi b/arch/arm64/boot/dts/hisilicon/hip06.dtsi index 35202ebe62a7..d78a6a755d03 100644 --- a/arch/arm64/boot/dts/hisilicon/hip06.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip06.dtsi @@ -350,6 +350,27 @@ #size-cells = <2>; ranges; + isa@a01b0000 { + compatible = "hisilicon,hip06-lpc"; + #size-cells = <1>; + #address-cells = <2>; + reg = <0x0 0xa01b0000 0x0 0x1000>; + + ipmi0: bt@e4 { + compatible = "ipmi-bt"; + device_type = "ipmi"; + reg = <0x01 0xe4 0x04>; + status = "disabled"; + }; + + uart0: lpc-uart@2f8 { + compatible = "ns16550a"; + clock-frequency = <1843200>; + reg = <0x01 0x2f8 0x08>; + status = "disabled"; + }; + }; + refclk: refclk { compatible = "fixed-clock"; clock-frequency = <50000000>; diff --git a/arch/arm64/boot/dts/hisilicon/hip07-d05.dts b/arch/arm64/boot/dts/hisilicon/hip07-d05.dts index fe7c16c36025..21147e8e3f94 100644 --- a/arch/arm64/boot/dts/hisilicon/hip07-d05.dts +++ b/arch/arm64/boot/dts/hisilicon/hip07-d05.dts @@ -57,6 +57,10 @@ status = "ok"; }; +&ipmi0 { + status = "ok"; +}; + &usb_ohci { status = "ok"; }; diff --git a/arch/arm64/boot/dts/hisilicon/hip07.dtsi b/arch/arm64/boot/dts/hisilicon/hip07.dtsi index 0600a6a84ab7..9c10030a07f8 100644 --- a/arch/arm64/boot/dts/hisilicon/hip07.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip07.dtsi @@ -1114,6 +1114,20 @@ #size-cells = <2>; ranges; + isa@a01b0000 { + compatible = "hisilicon,hip07-lpc"; + #size-cells = <1>; + #address-cells = <2>; + reg = <0x0 0xa01b0000 0x0 0x1000>; + + ipmi0: bt@e4 { + compatible = "ipmi-bt"; + device_type = "ipmi"; + reg = <0x01 0xe4 0x04>; + status = "disabled"; + }; + }; + uart0: uart@602b0000 { compatible = "arm,sbsa-uart"; reg = <0x0 0x602b0000 0x0 0x1000>; diff --git a/arch/arm64/boot/dts/hisilicon/poplar-pinctrl.dtsi b/arch/arm64/boot/dts/hisilicon/poplar-pinctrl.dtsi new file mode 100644 index 000000000000..7bb19e4b084a --- /dev/null +++ b/arch/arm64/boot/dts/hisilicon/poplar-pinctrl.dtsi @@ -0,0 +1,98 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Pinctrl dts file for HiSilicon Poplar board + * + * Copyright (c) 2016-2018 HiSilicon Technologies Co., Ltd. + */ + +#include <dt-bindings/pinctrl/hisi.h> + +/* value, enable bits, disable bits, mask */ +#define PINCTRL_PULLDOWN(value, enable, disable, mask) \ + (value << 13) (enable << 13) (disable << 13) (mask << 13) +#define PINCTRL_PULLUP(value, enable, disable, mask) \ + (value << 12) (enable << 12) (disable << 12) (mask << 12) +#define PINCTRL_SLEW_RATE(value, mask) (value << 8) (mask << 8) +#define PINCTRL_DRV_STRENGTH(value, mask) (value << 4) (mask << 4) + +&pmx0 { + emmc_pins_1: emmc-pins-1 { + pinctrl-single,pins = < + 0x000 MUX_M2 + 0x004 MUX_M2 + 0x008 MUX_M2 + 0x00c MUX_M2 + 0x010 MUX_M2 + 0x014 MUX_M2 + 0x018 MUX_M2 + 0x01c MUX_M2 + 0x024 MUX_M2 + >; + pinctrl-single,bias-pulldown = < + PINCTRL_PULLDOWN(0, 1, 0, 1) + >; + pinctrl-single,bias-pullup = < + PINCTRL_PULLUP(0, 1, 0, 1) + >; + pinctrl-single,slew-rate = < + PINCTRL_SLEW_RATE(1, 1) + >; + pinctrl-single,drive-strength = < + PINCTRL_DRV_STRENGTH(0xb, 0xf) + >; + }; + + emmc_pins_2: emmc-pins-2 { + pinctrl-single,pins = < + 0x028 MUX_M2 + >; + pinctrl-single,bias-pulldown = < + PINCTRL_PULLDOWN(0, 1, 0, 1) + >; + pinctrl-single,bias-pullup = < + PINCTRL_PULLUP(0, 1, 0, 1) + >; + pinctrl-single,slew-rate = < + PINCTRL_SLEW_RATE(1, 1) + >; + pinctrl-single,drive-strength = < + PINCTRL_DRV_STRENGTH(0x9, 0xf) + >; + }; + + emmc_pins_3: emmc-pins-3 { + pinctrl-single,pins = < + 0x02c MUX_M2 + >; + pinctrl-single,bias-pulldown = < + PINCTRL_PULLDOWN(0, 1, 0, 1) + >; + pinctrl-single,bias-pullup = < + PINCTRL_PULLUP(0, 1, 0, 1) + >; + pinctrl-single,slew-rate = < + PINCTRL_SLEW_RATE(1, 1) + >; + pinctrl-single,drive-strength = < + PINCTRL_DRV_STRENGTH(3, 3) + >; + }; + + emmc_pins_4: emmc-pins-4 { + pinctrl-single,pins = < + 0x030 MUX_M2 + >; + pinctrl-single,bias-pulldown = < + PINCTRL_PULLDOWN(1, 1, 0, 1) + >; + pinctrl-single,bias-pullup = < + PINCTRL_PULLUP(0, 1, 0, 1) + >; + pinctrl-single,slew-rate = < + PINCTRL_SLEW_RATE(1, 1) + >; + pinctrl-single,drive-strength = < + PINCTRL_DRV_STRENGTH(3, 3) + >; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index cb454beede55..ea9d49f2a911 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -1,8 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 -# Berlin SoC Family -dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-dmp.dtb -dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-stb.dtb - # Mvebu SoC Family dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts index ef7fd2ca2515..3ab25ad402b9 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts @@ -63,6 +63,33 @@ status = "okay"; }; +&spi0 { + status = "okay"; + + flash@0 { + reg = <0>; + compatible = "winbond,w25q32dw", "jedec,spi-flash"; + spi-max-frequency = <104000000>; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0 0x180000>; + }; + + partition@180000 { + label = "ubootenv"; + reg = <0x180000 0x10000>; + }; + }; + }; +}; + /* Exported on the micro USB connector J5 through an FTDI */ &uart0 { pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index 97207a61bc79..3353252d78a0 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -148,10 +148,13 @@ compatible = "marvell,armada3710-nb-pinctrl", "syscon", "simple-mfd"; reg = <0x13800 0x100>, <0x13C00 0x20>; + /* MPP1[19:0] */ gpionb: gpio { #gpio-cells = <2>; gpio-ranges = <&pinctrl_nb 0 0 36>; gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, @@ -209,10 +212,13 @@ compatible = "marvell,armada3710-sb-pinctrl", "syscon", "simple-mfd"; reg = <0x18800 0x100>, <0x18C00 0x20>; + /* MPP2[23:0] */ gpiosb: gpio { #gpio-cells = <2>; gpio-ranges = <&pinctrl_sb 0 0 30>; gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts index d6bec058a30a..412efdb46e7c 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts @@ -242,6 +242,11 @@ phy-mode = "10gbase-kr"; /* Generic PHY, providing serdes lanes */ phys = <&cp0_comphy2 0>; + + fixed-link { + speed = <10000>; + full-duplex; + }; }; &cp0_eth1 { diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts index 5689fb23bbab..1bac437369a1 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts @@ -177,6 +177,11 @@ &cp0_eth0 { status = "okay"; phy-mode = "10gbase-kr"; + + fixed-link { + speed = <10000>; + full-duplex; + }; }; &cp0_eth2 { @@ -303,6 +308,11 @@ &cp1_eth0 { status = "okay"; phy-mode = "10gbase-kr"; + + fixed-link { + speed = <10000>; + full-duplex; + }; }; &cp1_eth1 { diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts index 81de03ef860d..a66958ff4de6 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts @@ -27,6 +27,7 @@ ethernet0 = &cp0_eth0; ethernet1 = &cp1_eth0; ethernet2 = &cp1_eth1; + ethernet3 = &cp1_eth2; }; /* Regulator labels correspond with schematics */ @@ -64,6 +65,42 @@ compatible = "usb-nop-xceiv"; vcc-supply = <&v_5v0_usb3_hst_vbus>; }; + + sfp_eth0: sfp-eth0 { + /* CON15,16 - CPM lane 4 */ + compatible = "sff,sfp"; + i2c-bus = <&sfpp0_i2c>; + los-gpio = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_sfpp0_pins>; + }; + + sfp_eth1: sfp-eth1 { + /* CON17,18 - CPS lane 4 */ + compatible = "sff,sfp"; + i2c-bus = <&sfpp1_i2c>; + los-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>; + }; + + sfp_eth3: sfp-eth3 { + /* CON3,4 - CPS lane 5 */ + compatible = "sff,sfp"; + i2c-bus = <&sfp_1g_i2c>; + los-gpio = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>; + }; }; &uart0 { @@ -171,6 +208,10 @@ marvell,pins = "mpp47"; marvell,function = "gpio"; }; + cp0_sfp_1g_pins: sfp-1g-pins { + marvell,pins = "mpp51", "mpp53", "mpp54"; + marvell,function = "gpio"; + }; cp0_pcie_pins: pcie-pins { marvell,pins = "mpp52"; marvell,function = "gpio"; @@ -180,6 +221,10 @@ "mpp60", "mpp61"; marvell,function = "sdio"; }; + cp0_sfpp1_pins: sfpp1-pins { + marvell,pins = "mpp62"; + marvell,function = "gpio"; + }; }; &cp0_xmdio { @@ -188,11 +233,13 @@ phy0: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c45"; reg = <0>; + sfp = <&sfp_eth0>; }; phy8: ethernet-phy@8 { compatible = "ethernet-phy-ieee802.3-c45"; reg = <8>; + sfp = <&sfp_eth1>; }; }; @@ -257,7 +304,22 @@ phys = <&cp1_comphy0 1>; }; +&cp1_eth2 { + /* CPS Lane 5 */ + status = "okay"; + /* Network PHY */ + phy-mode = "2500base-x"; + managed = "in-band-status"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy5 2>; + sfp = <&sfp_eth3>; +}; + &cp1_pinctrl { + cp1_sfpp1_pins: sfpp1-pins { + marvell,pins = "mpp8", "mpp10", "mpp11"; + marvell,function = "gpio"; + }; cp1_spi1_pins: spi1-pins { marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16"; marvell,function = "spi1"; @@ -266,6 +328,14 @@ marvell,pins = "mpp6", "mpp7"; marvell,function = "uart0"; }; + cp1_sfp_1g_pins: sfp-1g-pins { + marvell,pins = "mpp24"; + marvell,function = "gpio"; + }; + cp1_sfpp0_pins: sfpp0-pins { + marvell,pins = "mpp26", "mpp27", "mpp28", "mpp29"; + marvell,function = "gpio"; + }; }; /* J27 UART header */ diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi index ed2f1237ea1e..7dabe25f6774 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi @@ -236,6 +236,7 @@ compatible = "marvell,armada-8k-ahci", "generic-ahci"; reg = <0x540000 0x30000>; + dma-coherent; interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&CP110_LABEL(clk) 1 15>, <&CP110_LABEL(clk) 1 16>; diff --git a/arch/arm64/boot/dts/marvell/berlin4ct-dmp.dts b/arch/arm64/boot/dts/marvell/berlin4ct-dmp.dts deleted file mode 100644 index fae6c6924705..000000000000 --- a/arch/arm64/boot/dts/marvell/berlin4ct-dmp.dts +++ /dev/null @@ -1,66 +0,0 @@ -/* - * Copyright (C) 2015 Marvell Technology Group Ltd. - * - * Author: Jisheng Zhang <jszhang@marvell.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; - -#include "berlin4ct.dtsi" - -/ { - model = "Marvell BG4CT DMP board"; - compatible = "marvell,berlin4ct-dmp", "marvell,berlin4ct", "marvell,berlin"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@1000000 { - device_type = "memory"; - /* the first 16MB is for firmwares' usage */ - reg = <0 0x01000000 0 0x7f000000>; - }; -}; - -&uart0 { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts b/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts deleted file mode 100644 index d47edad13e68..000000000000 --- a/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts +++ /dev/null @@ -1,66 +0,0 @@ -/* - * Copyright (C) 2015 Marvell Technology Group Ltd. - * - * Author: Jisheng Zhang <jszhang@marvell.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; - -#include "berlin4ct.dtsi" - -/ { - model = "Marvell BG4CT STB board"; - compatible = "marvell,berlin4ct-stb", "marvell,berlin4ct", "marvell,berlin"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@1000000 { - device_type = "memory"; - /* the first 16MB is for firmwares' usage */ - reg = <0 0x01000000 0 0x7f000000>; - }; -}; - -&uart0 { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/mediatek/mt2712-pinfunc.h b/arch/arm64/boot/dts/mediatek/mt2712-pinfunc.h new file mode 100644 index 000000000000..1b4cb0c55744 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt2712-pinfunc.h @@ -0,0 +1,1123 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 MediaTek Inc. + * Author: Zhiyong Tao <zhiyong.tao@mediatek.com> + * + */ +#ifndef __DTS_MT2712_PINFUNC_H +#define __DTS_MT2712_PINFUNC_H + +#include <dt-bindings/pinctrl/mt65xx.h> + +#define MT2712_PIN_0_EINT0__FUNC_GPIO0 (MTK_PIN_NO(0) | 0) +#define MT2712_PIN_0_EINT0__FUNC_EINT0 (MTK_PIN_NO(0) | 1) +#define MT2712_PIN_0_EINT0__FUNC_MBIST_DIAG_SCANOUT (MTK_PIN_NO(0) | 2) +#define MT2712_PIN_0_EINT0__FUNC_DSIA_TE (MTK_PIN_NO(0) | 3) +#define MT2712_PIN_0_EINT0__FUNC_DSIC_TE (MTK_PIN_NO(0) | 4) +#define MT2712_PIN_0_EINT0__FUNC_DIN_D3 (MTK_PIN_NO(0) | 5) +#define MT2712_PIN_0_EINT0__FUNC_PURE_HW_PROTECT (MTK_PIN_NO(0) | 6) + +#define MT2712_PIN_1_EINT1__FUNC_GPIO1 (MTK_PIN_NO(1) | 0) +#define MT2712_PIN_1_EINT1__FUNC_EINT1 (MTK_PIN_NO(1) | 1) +#define MT2712_PIN_1_EINT1__FUNC_IR_IN (MTK_PIN_NO(1) | 2) +#define MT2712_PIN_1_EINT1__FUNC_DSIB_TE (MTK_PIN_NO(1) | 3) +#define MT2712_PIN_1_EINT1__FUNC_DSID_TE (MTK_PIN_NO(1) | 4) +#define MT2712_PIN_1_EINT1__FUNC_DIN_D4 (MTK_PIN_NO(1) | 5) + +#define MT2712_PIN_2_EINT2__FUNC_GPIO2 (MTK_PIN_NO(2) | 0) +#define MT2712_PIN_2_EINT2__FUNC_EINT2 (MTK_PIN_NO(2) | 1) +#define MT2712_PIN_2_EINT2__FUNC_IR_IN (MTK_PIN_NO(2) | 2) +#define MT2712_PIN_2_EINT2__FUNC_LCM_RST1 (MTK_PIN_NO(2) | 3) +#define MT2712_PIN_2_EINT2__FUNC_DIN_D5 (MTK_PIN_NO(2) | 5) + +#define MT2712_PIN_3_EINT3__FUNC_GPIO3 (MTK_PIN_NO(3) | 0) +#define MT2712_PIN_3_EINT3__FUNC_EINT3 (MTK_PIN_NO(3) | 1) +#define MT2712_PIN_3_EINT3__FUNC_IR_IN (MTK_PIN_NO(3) | 2) +#define MT2712_PIN_3_EINT3__FUNC_LCM_RST0 (MTK_PIN_NO(3) | 3) +#define MT2712_PIN_3_EINT3__FUNC_DIN_D6 (MTK_PIN_NO(3) | 5) + +#define MT2712_PIN_4_PWM0__FUNC_GPIO4 (MTK_PIN_NO(4) | 0) +#define MT2712_PIN_4_PWM0__FUNC_PWM0 (MTK_PIN_NO(4) | 1) +#define MT2712_PIN_4_PWM0__FUNC_DISP0_PWM (MTK_PIN_NO(4) | 2) +#define MT2712_PIN_4_PWM0__FUNC_DISP1_PWM (MTK_PIN_NO(4) | 3) +#define MT2712_PIN_4_PWM0__FUNC_DIN_CLK (MTK_PIN_NO(4) | 5) + +#define MT2712_PIN_5_PWM1__FUNC_GPIO5 (MTK_PIN_NO(5) | 0) +#define MT2712_PIN_5_PWM1__FUNC_PWM1 (MTK_PIN_NO(5) | 1) +#define MT2712_PIN_5_PWM1__FUNC_DISP1_PWM (MTK_PIN_NO(5) | 2) +#define MT2712_PIN_5_PWM1__FUNC_DISP0_PWM (MTK_PIN_NO(5) | 3) +#define MT2712_PIN_5_PWM1__FUNC_DIN_VSYNC (MTK_PIN_NO(5) | 5) + +#define MT2712_PIN_6_PWM2__FUNC_GPIO6 (MTK_PIN_NO(6) | 0) +#define MT2712_PIN_6_PWM2__FUNC_PWM2 (MTK_PIN_NO(6) | 1) +#define MT2712_PIN_6_PWM2__FUNC_DISP0_PWM (MTK_PIN_NO(6) | 2) +#define MT2712_PIN_6_PWM2__FUNC_DISP1_PWM (MTK_PIN_NO(6) | 3) +#define MT2712_PIN_6_PWM2__FUNC_DISP2_PWM (MTK_PIN_NO(6) | 4) +#define MT2712_PIN_6_PWM2__FUNC_DIN_HSYNC (MTK_PIN_NO(6) | 5) + +#define MT2712_PIN_7_PWM3__FUNC_GPIO7 (MTK_PIN_NO(7) | 0) +#define MT2712_PIN_7_PWM3__FUNC_PWM3 (MTK_PIN_NO(7) | 1) +#define MT2712_PIN_7_PWM3__FUNC_DISP1_PWM (MTK_PIN_NO(7) | 2) +#define MT2712_PIN_7_PWM3__FUNC_DISP0_PWM (MTK_PIN_NO(7) | 3) +#define MT2712_PIN_7_PWM3__FUNC_LCM_RST2 (MTK_PIN_NO(7) | 4) +#define MT2712_PIN_7_PWM3__FUNC_DIN_D0 (MTK_PIN_NO(7) | 5) + +#define MT2712_PIN_8_PWM4__FUNC_GPIO8 (MTK_PIN_NO(8) | 0) +#define MT2712_PIN_8_PWM4__FUNC_PWM4 (MTK_PIN_NO(8) | 1) +#define MT2712_PIN_8_PWM4__FUNC_DISP0_PWM (MTK_PIN_NO(8) | 2) +#define MT2712_PIN_8_PWM4__FUNC_DISP1_PWM (MTK_PIN_NO(8) | 3) +#define MT2712_PIN_8_PWM4__FUNC_DSIA_TE (MTK_PIN_NO(8) | 4) +#define MT2712_PIN_8_PWM4__FUNC_DIN_D1 (MTK_PIN_NO(8) | 5) + +#define MT2712_PIN_9_PWM5__FUNC_GPIO9 (MTK_PIN_NO(9) | 0) +#define MT2712_PIN_9_PWM5__FUNC_PWM5 (MTK_PIN_NO(9) | 1) +#define MT2712_PIN_9_PWM5__FUNC_DISP1_PWM (MTK_PIN_NO(9) | 2) +#define MT2712_PIN_9_PWM5__FUNC_DISP0_PWM (MTK_PIN_NO(9) | 3) +#define MT2712_PIN_9_PWM5__FUNC_DSIB_TE (MTK_PIN_NO(9) | 4) +#define MT2712_PIN_9_PWM5__FUNC_DIN_D2 (MTK_PIN_NO(9) | 5) + +#define MT2712_PIN_10_PWM6__FUNC_GPIO10 (MTK_PIN_NO(10) | 0) +#define MT2712_PIN_10_PWM6__FUNC_PWM6 (MTK_PIN_NO(10) | 1) +#define MT2712_PIN_10_PWM6__FUNC_DISP0_PWM (MTK_PIN_NO(10) | 2) +#define MT2712_PIN_10_PWM6__FUNC_DISP1_PWM (MTK_PIN_NO(10) | 3) +#define MT2712_PIN_10_PWM6__FUNC_LCM_RST0 (MTK_PIN_NO(10) | 4) + +#define MT2712_PIN_11_PWM7__FUNC_GPIO11 (MTK_PIN_NO(11) | 0) +#define MT2712_PIN_11_PWM7__FUNC_PWM7 (MTK_PIN_NO(11) | 1) +#define MT2712_PIN_11_PWM7__FUNC_DISP1_PWM (MTK_PIN_NO(11) | 2) +#define MT2712_PIN_11_PWM7__FUNC_DISP0_PWM (MTK_PIN_NO(11) | 3) +#define MT2712_PIN_11_PWM7__FUNC_LCM_RST1 (MTK_PIN_NO(11) | 4) + +#define MT2712_PIN_12_IDDIG_P0__FUNC_GPIO12 (MTK_PIN_NO(12) | 0) +#define MT2712_PIN_12_IDDIG_P0__FUNC_IDDIG_A (MTK_PIN_NO(12) | 1) +#define MT2712_PIN_12_IDDIG_P0__FUNC_DIN_D7 (MTK_PIN_NO(12) | 5) + +#define MT2712_PIN_13_DRV_VBUS_P0__FUNC_GPIO13 (MTK_PIN_NO(13) | 0) +#define MT2712_PIN_13_DRV_VBUS_P0__FUNC_DRV_VBUS_A (MTK_PIN_NO(13) | 1) + +#define MT2712_PIN_14_IDDIG_P1__FUNC_GPIO14 (MTK_PIN_NO(14) | 0) +#define MT2712_PIN_14_IDDIG_P1__FUNC_IDDIG_B (MTK_PIN_NO(14) | 1) + +#define MT2712_PIN_15_DRV_VBUS_P1__FUNC_GPIO15 (MTK_PIN_NO(15) | 0) +#define MT2712_PIN_15_DRV_VBUS_P1__FUNC_DRV_VBUS_B (MTK_PIN_NO(15) | 1) + +#define MT2712_PIN_16_DRV_VBUS_P2__FUNC_GPIO16 (MTK_PIN_NO(16) | 0) +#define MT2712_PIN_16_DRV_VBUS_P2__FUNC_DRV_VBUS_C (MTK_PIN_NO(16) | 1) + +#define MT2712_PIN_17_DRV_VBUS_P3__FUNC_GPIO17 (MTK_PIN_NO(17) | 0) +#define MT2712_PIN_17_DRV_VBUS_P3__FUNC_DRV_VBUS_D (MTK_PIN_NO(17) | 1) + +#define MT2712_PIN_18_KPROW0__FUNC_GPIO18 (MTK_PIN_NO(18) | 0) +#define MT2712_PIN_18_KPROW0__FUNC_KROW0 (MTK_PIN_NO(18) | 1) + +#define MT2712_PIN_19_KPCOL0__FUNC_GPIO19 (MTK_PIN_NO(19) | 0) +#define MT2712_PIN_19_KPCOL0__FUNC_KCOL0 (MTK_PIN_NO(19) | 1) + +#define MT2712_PIN_20_KPROW1__FUNC_GPIO20 (MTK_PIN_NO(20) | 0) +#define MT2712_PIN_20_KPROW1__FUNC_KROW1 (MTK_PIN_NO(20) | 1) + +#define MT2712_PIN_21_KPCOL1__FUNC_GPIO21 (MTK_PIN_NO(21) | 0) +#define MT2712_PIN_21_KPCOL1__FUNC_KCOL1 (MTK_PIN_NO(21) | 1) + +#define MT2712_PIN_22_KPROW2__FUNC_GPIO22 (MTK_PIN_NO(22) | 0) +#define MT2712_PIN_22_KPROW2__FUNC_KROW2 (MTK_PIN_NO(22) | 1) +#define MT2712_PIN_22_KPROW2__FUNC_DISP1_PWM (MTK_PIN_NO(22) | 2) + +#define MT2712_PIN_23_KPCOL2__FUNC_GPIO23 (MTK_PIN_NO(23) | 0) +#define MT2712_PIN_23_KPCOL2__FUNC_KCOL2 (MTK_PIN_NO(23) | 1) +#define MT2712_PIN_23_KPCOL2__FUNC_DISP0_PWM (MTK_PIN_NO(23) | 2) + +#define MT2712_PIN_24_CMMCLK__FUNC_GPIO24 (MTK_PIN_NO(24) | 0) +#define MT2712_PIN_24_CMMCLK__FUNC_CMMCLK (MTK_PIN_NO(24) | 1) +#define MT2712_PIN_24_CMMCLK__FUNC_DBG_MON_A_1_ (MTK_PIN_NO(24) | 7) + +#define MT2712_PIN_25_CM2MCLK__FUNC_GPIO25 (MTK_PIN_NO(25) | 0) +#define MT2712_PIN_25_CM2MCLK__FUNC_CM2MCLK (MTK_PIN_NO(25) | 1) +#define MT2712_PIN_25_CM2MCLK__FUNC_DBG_MON_A_2_ (MTK_PIN_NO(25) | 7) + +#define MT2712_PIN_26_PCM_TX__FUNC_GPIO26 (MTK_PIN_NO(26) | 0) +#define MT2712_PIN_26_PCM_TX__FUNC_PCM1_DO (MTK_PIN_NO(26) | 1) +#define MT2712_PIN_26_PCM_TX__FUNC_MRG_TX (MTK_PIN_NO(26) | 2) +#define MT2712_PIN_26_PCM_TX__FUNC_DAI_TX (MTK_PIN_NO(26) | 3) +#define MT2712_PIN_26_PCM_TX__FUNC_MRG_RX (MTK_PIN_NO(26) | 4) +#define MT2712_PIN_26_PCM_TX__FUNC_DAI_RX (MTK_PIN_NO(26) | 5) +#define MT2712_PIN_26_PCM_TX__FUNC_PCM1_DI (MTK_PIN_NO(26) | 6) +#define MT2712_PIN_26_PCM_TX__FUNC_DBG_MON_A_3_ (MTK_PIN_NO(26) | 7) + +#define MT2712_PIN_27_PCM_CLK__FUNC_GPIO27 (MTK_PIN_NO(27) | 0) +#define MT2712_PIN_27_PCM_CLK__FUNC_PCM1_CLK (MTK_PIN_NO(27) | 1) +#define MT2712_PIN_27_PCM_CLK__FUNC_MRG_CLK (MTK_PIN_NO(27) | 2) +#define MT2712_PIN_27_PCM_CLK__FUNC_DAI_CLK (MTK_PIN_NO(27) | 3) +#define MT2712_PIN_27_PCM_CLK__FUNC_DBG_MON_A_4_ (MTK_PIN_NO(27) | 7) + +#define MT2712_PIN_28_PCM_RX__FUNC_GPIO28 (MTK_PIN_NO(28) | 0) +#define MT2712_PIN_28_PCM_RX__FUNC_PCM1_DI (MTK_PIN_NO(28) | 1) +#define MT2712_PIN_28_PCM_RX__FUNC_MRG_RX (MTK_PIN_NO(28) | 2) +#define MT2712_PIN_28_PCM_RX__FUNC_DAI_RX (MTK_PIN_NO(28) | 3) +#define MT2712_PIN_28_PCM_RX__FUNC_MRG_TX (MTK_PIN_NO(28) | 4) +#define MT2712_PIN_28_PCM_RX__FUNC_DAI_TX (MTK_PIN_NO(28) | 5) +#define MT2712_PIN_28_PCM_RX__FUNC_PCM1_DO (MTK_PIN_NO(28) | 6) +#define MT2712_PIN_28_PCM_RX__FUNC_DBG_MON_A_5_ (MTK_PIN_NO(28) | 7) + +#define MT2712_PIN_29_PCM_SYNC__FUNC_GPIO29 (MTK_PIN_NO(29) | 0) +#define MT2712_PIN_29_PCM_SYNC__FUNC_PCM1_SYNC (MTK_PIN_NO(29) | 1) +#define MT2712_PIN_29_PCM_SYNC__FUNC_MRG_SYNC (MTK_PIN_NO(29) | 2) +#define MT2712_PIN_29_PCM_SYNC__FUNC_DAI_SYNC (MTK_PIN_NO(29) | 3) +#define MT2712_PIN_29_PCM_SYNC__FUNC_DBG_MON_A_6_ (MTK_PIN_NO(29) | 7) + +#define MT2712_PIN_30_NCEB0__FUNC_GPIO30 (MTK_PIN_NO(30) | 0) +#define MT2712_PIN_30_NCEB0__FUNC_NCEB0 (MTK_PIN_NO(30) | 1) +#define MT2712_PIN_30_NCEB0__FUNC_USB0_FT_SDA (MTK_PIN_NO(30) | 2) +#define MT2712_PIN_30_NCEB0__FUNC_DBG_MON_A_7_ (MTK_PIN_NO(30) | 7) + +#define MT2712_PIN_31_NCEB1__FUNC_GPIO31 (MTK_PIN_NO(31) | 0) +#define MT2712_PIN_31_NCEB1__FUNC_NCEB1 (MTK_PIN_NO(31) | 1) +#define MT2712_PIN_31_NCEB1__FUNC_USB1_FT_SCL (MTK_PIN_NO(31) | 2) +#define MT2712_PIN_31_NCEB1__FUNC_DBG_MON_A_8_ (MTK_PIN_NO(31) | 7) + +#define MT2712_PIN_32_NF_DQS__FUNC_GPIO32 (MTK_PIN_NO(32) | 0) +#define MT2712_PIN_32_NF_DQS__FUNC_NF_DQS (MTK_PIN_NO(32) | 1) +#define MT2712_PIN_32_NF_DQS__FUNC_USB1_FT_SDA (MTK_PIN_NO(32) | 2) +#define MT2712_PIN_32_NF_DQS__FUNC_DBG_MON_A_9_ (MTK_PIN_NO(32) | 7) + +#define MT2712_PIN_33_NWEB__FUNC_GPIO33 (MTK_PIN_NO(33) | 0) +#define MT2712_PIN_33_NWEB__FUNC_NWEB (MTK_PIN_NO(33) | 1) +#define MT2712_PIN_33_NWEB__FUNC_USB2_FT_SCL (MTK_PIN_NO(33) | 2) +#define MT2712_PIN_33_NWEB__FUNC_DBG_MON_A_10_ (MTK_PIN_NO(33) | 7) + +#define MT2712_PIN_34_NREB__FUNC_GPIO34 (MTK_PIN_NO(34) | 0) +#define MT2712_PIN_34_NREB__FUNC_NREB (MTK_PIN_NO(34) | 1) +#define MT2712_PIN_34_NREB__FUNC_USB2_FT_SDA (MTK_PIN_NO(34) | 2) +#define MT2712_PIN_34_NREB__FUNC_DBG_MON_A_11_ (MTK_PIN_NO(34) | 7) + +#define MT2712_PIN_35_NCLE__FUNC_GPIO35 (MTK_PIN_NO(35) | 0) +#define MT2712_PIN_35_NCLE__FUNC_NCLE (MTK_PIN_NO(35) | 1) +#define MT2712_PIN_35_NCLE__FUNC_USB3_FT_SCL (MTK_PIN_NO(35) | 2) +#define MT2712_PIN_35_NCLE__FUNC_DBG_MON_A_12_ (MTK_PIN_NO(35) | 7) + +#define MT2712_PIN_36_NALE__FUNC_GPIO36 (MTK_PIN_NO(36) | 0) +#define MT2712_PIN_36_NALE__FUNC_NALE (MTK_PIN_NO(36) | 1) +#define MT2712_PIN_36_NALE__FUNC_USB3_FT_SDA (MTK_PIN_NO(36) | 2) +#define MT2712_PIN_36_NALE__FUNC_DBG_MON_A_13_ (MTK_PIN_NO(36) | 7) + +#define MT2712_PIN_37_MSDC0E_CLK__FUNC_GPIO37 (MTK_PIN_NO(37) | 0) +#define MT2712_PIN_37_MSDC0E_CLK__FUNC_MSDC0_CLK (MTK_PIN_NO(37) | 1) +#define MT2712_PIN_37_MSDC0E_CLK__FUNC_USB0_FT_SCL (MTK_PIN_NO(37) | 2) +#define MT2712_PIN_37_MSDC0E_CLK__FUNC_DBG_MON_A_0_ (MTK_PIN_NO(37) | 7) + +#define MT2712_PIN_38_MSDC0E_DAT7__FUNC_GPIO38 (MTK_PIN_NO(38) | 0) +#define MT2712_PIN_38_MSDC0E_DAT7__FUNC_MSDC0_DAT7 (MTK_PIN_NO(38) | 1) +#define MT2712_PIN_38_MSDC0E_DAT7__FUNC_NAND_ND7 (MTK_PIN_NO(38) | 2) +#define MT2712_PIN_38_MSDC0E_DAT7__FUNC_DBG_MON_A_14_ (MTK_PIN_NO(38) | 7) + +#define MT2712_PIN_39_MSDC0E_DAT6__FUNC_GPIO39 (MTK_PIN_NO(39) | 0) +#define MT2712_PIN_39_MSDC0E_DAT6__FUNC_MSDC0_DAT6 (MTK_PIN_NO(39) | 1) +#define MT2712_PIN_39_MSDC0E_DAT6__FUNC_NAND_ND6 (MTK_PIN_NO(39) | 2) +#define MT2712_PIN_39_MSDC0E_DAT6__FUNC_DBG_MON_A_15_ (MTK_PIN_NO(39) | 7) + +#define MT2712_PIN_40_MSDC0E_DAT5__FUNC_GPIO40 (MTK_PIN_NO(40) | 0) +#define MT2712_PIN_40_MSDC0E_DAT5__FUNC_MSDC0_DAT5 (MTK_PIN_NO(40) | 1) +#define MT2712_PIN_40_MSDC0E_DAT5__FUNC_NAND_ND5 (MTK_PIN_NO(40) | 2) +#define MT2712_PIN_40_MSDC0E_DAT5__FUNC_DBG_MON_A_16_ (MTK_PIN_NO(40) | 7) + +#define MT2712_PIN_41_MSDC0E_DAT4__FUNC_GPIO41 (MTK_PIN_NO(41) | 0) +#define MT2712_PIN_41_MSDC0E_DAT4__FUNC_MSDC0_DAT4 (MTK_PIN_NO(41) | 1) +#define MT2712_PIN_41_MSDC0E_DAT4__FUNC_NAND_ND4 (MTK_PIN_NO(41) | 2) +#define MT2712_PIN_41_MSDC0E_DAT4__FUNC_DBG_MON_A_17_ (MTK_PIN_NO(41) | 7) + +#define MT2712_PIN_42_MSDC0E_DAT3__FUNC_GPIO42 (MTK_PIN_NO(42) | 0) +#define MT2712_PIN_42_MSDC0E_DAT3__FUNC_MSDC0_DAT3 (MTK_PIN_NO(42) | 1) +#define MT2712_PIN_42_MSDC0E_DAT3__FUNC_NAND_ND3 (MTK_PIN_NO(42) | 2) +#define MT2712_PIN_42_MSDC0E_DAT3__FUNC_DBG_MON_A_18_ (MTK_PIN_NO(42) | 7) + +#define MT2712_PIN_43_MSDC0E_DAT2__FUNC_GPIO43 (MTK_PIN_NO(43) | 0) +#define MT2712_PIN_43_MSDC0E_DAT2__FUNC_MSDC0_DAT2 (MTK_PIN_NO(43) | 1) +#define MT2712_PIN_43_MSDC0E_DAT2__FUNC_NAND_ND2 (MTK_PIN_NO(43) | 2) +#define MT2712_PIN_43_MSDC0E_DAT2__FUNC_DBG_MON_A_19_ (MTK_PIN_NO(43) | 7) + +#define MT2712_PIN_44_MSDC0E_DAT1__FUNC_GPIO44 (MTK_PIN_NO(44) | 0) +#define MT2712_PIN_44_MSDC0E_DAT1__FUNC_MSDC0_DAT1 (MTK_PIN_NO(44) | 1) +#define MT2712_PIN_44_MSDC0E_DAT1__FUNC_NAND_ND1 (MTK_PIN_NO(44) | 2) +#define MT2712_PIN_44_MSDC0E_DAT1__FUNC_DBG_MON_A_20_ (MTK_PIN_NO(44) | 7) + +#define MT2712_PIN_45_MSDC0E_DAT0__FUNC_GPIO45 (MTK_PIN_NO(45) | 0) +#define MT2712_PIN_45_MSDC0E_DAT0__FUNC_MSDC0_DAT0 (MTK_PIN_NO(45) | 1) +#define MT2712_PIN_45_MSDC0E_DAT0__FUNC_NAND_ND0 (MTK_PIN_NO(45) | 2) +#define MT2712_PIN_45_MSDC0E_DAT0__FUNC_DBG_MON_A_21_ (MTK_PIN_NO(45) | 7) + +#define MT2712_PIN_46_MSDC0E_CMD__FUNC_GPIO46 (MTK_PIN_NO(46) | 0) +#define MT2712_PIN_46_MSDC0E_CMD__FUNC_MSDC0_CMD (MTK_PIN_NO(46) | 1) +#define MT2712_PIN_46_MSDC0E_CMD__FUNC_NAND_NRNB (MTK_PIN_NO(46) | 2) +#define MT2712_PIN_46_MSDC0E_CMD__FUNC_DBG_MON_A_22_ (MTK_PIN_NO(46) | 7) + +#define MT2712_PIN_47_MSDC0E_DSL__FUNC_GPIO47 (MTK_PIN_NO(47) | 0) +#define MT2712_PIN_47_MSDC0E_DSL__FUNC_MSDC0_DSL (MTK_PIN_NO(47) | 1) +#define MT2712_PIN_47_MSDC0E_DSL__FUNC_DBG_MON_A_23_ (MTK_PIN_NO(47) | 7) + +#define MT2712_PIN_48_MSDC0E_RSTB__FUNC_GPIO48 (MTK_PIN_NO(48) | 0) +#define MT2712_PIN_48_MSDC0E_RSTB__FUNC_MSDC0_RSTB (MTK_PIN_NO(48) | 1) +#define MT2712_PIN_48_MSDC0E_RSTB__FUNC_DBG_MON_A_24_ (MTK_PIN_NO(48) | 7) + +#define MT2712_PIN_49_MSDC3_DAT3__FUNC_GPIO49 (MTK_PIN_NO(49) | 0) +#define MT2712_PIN_49_MSDC3_DAT3__FUNC_MSDC3_DAT3 (MTK_PIN_NO(49) | 1) +#define MT2712_PIN_49_MSDC3_DAT3__FUNC_DBG_MON_A_25_ (MTK_PIN_NO(49) | 7) + +#define MT2712_PIN_50_MSDC3_DAT2__FUNC_GPIO50 (MTK_PIN_NO(50) | 0) +#define MT2712_PIN_50_MSDC3_DAT2__FUNC_MSDC3_DAT2 (MTK_PIN_NO(50) | 1) +#define MT2712_PIN_50_MSDC3_DAT2__FUNC_DBG_MON_A_26_ (MTK_PIN_NO(50) | 7) + +#define MT2712_PIN_51_MSDC3_DAT1__FUNC_GPIO51 (MTK_PIN_NO(51) | 0) +#define MT2712_PIN_51_MSDC3_DAT1__FUNC_MSDC3_DAT1 (MTK_PIN_NO(51) | 1) +#define MT2712_PIN_51_MSDC3_DAT1__FUNC_DBG_MON_A_27_ (MTK_PIN_NO(51) | 7) + +#define MT2712_PIN_52_MSDC3_DAT0__FUNC_GPIO52 (MTK_PIN_NO(52) | 0) +#define MT2712_PIN_52_MSDC3_DAT0__FUNC_MSDC3_DAT0 (MTK_PIN_NO(52) | 1) +#define MT2712_PIN_52_MSDC3_DAT0__FUNC_DBG_MON_A_28_ (MTK_PIN_NO(52) | 7) + +#define MT2712_PIN_53_MSDC3_CMD__FUNC_GPIO53 (MTK_PIN_NO(53) | 0) +#define MT2712_PIN_53_MSDC3_CMD__FUNC_MSDC3_CMD (MTK_PIN_NO(53) | 1) +#define MT2712_PIN_53_MSDC3_CMD__FUNC_DBG_MON_A_29_ (MTK_PIN_NO(53) | 7) + +#define MT2712_PIN_54_MSDC3_INS__FUNC_GPIO54 (MTK_PIN_NO(54) | 0) +#define MT2712_PIN_54_MSDC3_INS__FUNC_MSDC3_INS (MTK_PIN_NO(54) | 1) +#define MT2712_PIN_54_MSDC3_INS__FUNC_DBG_MON_A_30_ (MTK_PIN_NO(54) | 7) + +#define MT2712_PIN_55_MSDC3_DSL__FUNC_GPIO55 (MTK_PIN_NO(55) | 0) +#define MT2712_PIN_55_MSDC3_DSL__FUNC_MSDC3_DSL (MTK_PIN_NO(55) | 1) +#define MT2712_PIN_55_MSDC3_DSL__FUNC_DBG_MON_A_31_ (MTK_PIN_NO(55) | 7) + +#define MT2712_PIN_56_MSDC3_CLK__FUNC_GPIO56 (MTK_PIN_NO(56) | 0) +#define MT2712_PIN_56_MSDC3_CLK__FUNC_MSDC3_CLK (MTK_PIN_NO(56) | 1) +#define MT2712_PIN_56_MSDC3_CLK__FUNC_DBG_MON_A_32_ (MTK_PIN_NO(56) | 7) + +#define MT2712_PIN_57_NOR_CS__FUNC_GPIO57 (MTK_PIN_NO(57) | 0) +#define MT2712_PIN_57_NOR_CS__FUNC_NOR_CS (MTK_PIN_NO(57) | 1) + +#define MT2712_PIN_58_NOR_CK__FUNC_GPIO58 (MTK_PIN_NO(58) | 0) +#define MT2712_PIN_58_NOR_CK__FUNC_NOR_CK (MTK_PIN_NO(58) | 1) + +#define MT2712_PIN_59_NOR_IO0__FUNC_GPIO59 (MTK_PIN_NO(59) | 0) +#define MT2712_PIN_59_NOR_IO0__FUNC_NOR_IO0 (MTK_PIN_NO(59) | 1) + +#define MT2712_PIN_60_NOR_IO1__FUNC_GPIO60 (MTK_PIN_NO(60) | 0) +#define MT2712_PIN_60_NOR_IO1__FUNC_NOR_IO1 (MTK_PIN_NO(60) | 1) + +#define MT2712_PIN_61_NOR_IO2__FUNC_GPIO61 (MTK_PIN_NO(61) | 0) +#define MT2712_PIN_61_NOR_IO2__FUNC_NOR_IO2 (MTK_PIN_NO(61) | 1) + +#define MT2712_PIN_62_NOR_IO3__FUNC_GPIO62 (MTK_PIN_NO(62) | 0) +#define MT2712_PIN_62_NOR_IO3__FUNC_NOR_IO3 (MTK_PIN_NO(62) | 1) + +#define MT2712_PIN_63_MSDC1_CLK__FUNC_GPIO63 (MTK_PIN_NO(63) | 0) +#define MT2712_PIN_63_MSDC1_CLK__FUNC_MSDC1_CLK (MTK_PIN_NO(63) | 1) +#define MT2712_PIN_63_MSDC1_CLK__FUNC_UDI_TCK (MTK_PIN_NO(63) | 2) + +#define MT2712_PIN_64_MSDC1_DAT3__FUNC_GPIO64 (MTK_PIN_NO(64) | 0) +#define MT2712_PIN_64_MSDC1_DAT3__FUNC_MSDC1_DAT3 (MTK_PIN_NO(64) | 1) +#define MT2712_PIN_64_MSDC1_DAT3__FUNC_UDI_TDI (MTK_PIN_NO(64) | 2) + +#define MT2712_PIN_65_MSDC1_DAT1__FUNC_GPIO65 (MTK_PIN_NO(65) | 0) +#define MT2712_PIN_65_MSDC1_DAT1__FUNC_MSDC1_DAT1 (MTK_PIN_NO(65) | 1) +#define MT2712_PIN_65_MSDC1_DAT1__FUNC_UDI_TMS (MTK_PIN_NO(65) | 2) + +#define MT2712_PIN_66_MSDC1_DAT2__FUNC_GPIO66 (MTK_PIN_NO(66) | 0) +#define MT2712_PIN_66_MSDC1_DAT2__FUNC_MSDC1_DAT2 (MTK_PIN_NO(66) | 1) +#define MT2712_PIN_66_MSDC1_DAT2__FUNC_UDI_TDO (MTK_PIN_NO(66) | 2) + +#define MT2712_PIN_67_MSDC1_PSW__FUNC_GPIO67 (MTK_PIN_NO(67) | 0) +#define MT2712_PIN_67_MSDC1_PSW__FUNC_UDI_NTRST (MTK_PIN_NO(67) | 2) + +#define MT2712_PIN_68_MSDC1_DAT0__FUNC_GPIO68 (MTK_PIN_NO(68) | 0) +#define MT2712_PIN_68_MSDC1_DAT0__FUNC_MSDC1_DAT0 (MTK_PIN_NO(68) | 1) + +#define MT2712_PIN_69_MSDC1_CMD__FUNC_GPIO69 (MTK_PIN_NO(69) | 0) +#define MT2712_PIN_69_MSDC1_CMD__FUNC_MSDC1_CMD (MTK_PIN_NO(69) | 1) + +#define MT2712_PIN_70_MSDC1_INS__FUNC_GPIO70 (MTK_PIN_NO(70) | 0) + +#define MT2712_PIN_71_GBE_TXD3__FUNC_GPIO71 (MTK_PIN_NO(71) | 0) +#define MT2712_PIN_71_GBE_TXD3__FUNC_GBE_TXD3 (MTK_PIN_NO(71) | 1) +#define MT2712_PIN_71_GBE_TXD3__FUNC_DBG_MON_B_0_ (MTK_PIN_NO(71) | 7) + +#define MT2712_PIN_72_GBE_TXD2__FUNC_GPIO72 (MTK_PIN_NO(72) | 0) +#define MT2712_PIN_72_GBE_TXD2__FUNC_GBE_TXD2 (MTK_PIN_NO(72) | 1) +#define MT2712_PIN_72_GBE_TXD2__FUNC_DBG_MON_B_1_ (MTK_PIN_NO(72) | 7) + +#define MT2712_PIN_73_GBE_TXD1__FUNC_GPIO73 (MTK_PIN_NO(73) | 0) +#define MT2712_PIN_73_GBE_TXD1__FUNC_GBE_TXD1 (MTK_PIN_NO(73) | 1) +#define MT2712_PIN_73_GBE_TXD1__FUNC_DBG_MON_B_2_ (MTK_PIN_NO(73) | 7) + +#define MT2712_PIN_74_GBE_TXD0__FUNC_GPIO74 (MTK_PIN_NO(74) | 0) +#define MT2712_PIN_74_GBE_TXD0__FUNC_GBE_TXD0 (MTK_PIN_NO(74) | 1) +#define MT2712_PIN_74_GBE_TXD0__FUNC_DBG_MON_B_3_ (MTK_PIN_NO(74) | 7) + +#define MT2712_PIN_75_GBE_TXC__FUNC_GPIO75 (MTK_PIN_NO(75) | 0) +#define MT2712_PIN_75_GBE_TXC__FUNC_GBE_TXC (MTK_PIN_NO(75) | 1) +#define MT2712_PIN_75_GBE_TXC__FUNC_DBG_MON_B_4_ (MTK_PIN_NO(75) | 7) + +#define MT2712_PIN_76_GBE_TXEN__FUNC_GPIO76 (MTK_PIN_NO(76) | 0) +#define MT2712_PIN_76_GBE_TXEN__FUNC_GBE_TXEN (MTK_PIN_NO(76) | 1) +#define MT2712_PIN_76_GBE_TXEN__FUNC_DBG_MON_B_5_ (MTK_PIN_NO(76) | 7) + +#define MT2712_PIN_77_GBE_TXER__FUNC_GPIO77 (MTK_PIN_NO(77) | 0) +#define MT2712_PIN_77_GBE_TXER__FUNC_GBE_TXER (MTK_PIN_NO(77) | 1) +#define MT2712_PIN_77_GBE_TXER__FUNC_DBG_MON_B_6_ (MTK_PIN_NO(77) | 7) + +#define MT2712_PIN_78_GBE_RXD3__FUNC_GPIO78 (MTK_PIN_NO(78) | 0) +#define MT2712_PIN_78_GBE_RXD3__FUNC_GBE_RXD3 (MTK_PIN_NO(78) | 1) +#define MT2712_PIN_78_GBE_RXD3__FUNC_DBG_MON_B_7_ (MTK_PIN_NO(78) | 7) + +#define MT2712_PIN_79_GBE_RXD2__FUNC_GPIO79 (MTK_PIN_NO(79) | 0) +#define MT2712_PIN_79_GBE_RXD2__FUNC_GBE_RXD2 (MTK_PIN_NO(79) | 1) +#define MT2712_PIN_79_GBE_RXD2__FUNC_DBG_MON_B_8_ (MTK_PIN_NO(79) | 7) + +#define MT2712_PIN_80_GBE_RXD1__FUNC_GPIO80 (MTK_PIN_NO(80) | 0) +#define MT2712_PIN_80_GBE_RXD1__FUNC_GBE_RXD1 (MTK_PIN_NO(80) | 1) +#define MT2712_PIN_80_GBE_RXD1__FUNC_DBG_MON_B_9_ (MTK_PIN_NO(80) | 7) + +#define MT2712_PIN_81_GBE_RXD0__FUNC_GPIO81 (MTK_PIN_NO(81) | 0) +#define MT2712_PIN_81_GBE_RXD0__FUNC_GBE_RXD0 (MTK_PIN_NO(81) | 1) +#define MT2712_PIN_81_GBE_RXD0__FUNC_DBG_MON_B_10_ (MTK_PIN_NO(81) | 7) + +#define MT2712_PIN_82_GBE_RXDV__FUNC_GPIO82 (MTK_PIN_NO(82) | 0) +#define MT2712_PIN_82_GBE_RXDV__FUNC_GBE_RXDV (MTK_PIN_NO(82) | 1) +#define MT2712_PIN_82_GBE_RXDV__FUNC_DBG_MON_B_11_ (MTK_PIN_NO(82) | 7) + +#define MT2712_PIN_83_GBE_RXER__FUNC_GPIO83 (MTK_PIN_NO(83) | 0) +#define MT2712_PIN_83_GBE_RXER__FUNC_GBE_RXER (MTK_PIN_NO(83) | 1) +#define MT2712_PIN_83_GBE_RXER__FUNC_DBG_MON_B_12_ (MTK_PIN_NO(83) | 7) + +#define MT2712_PIN_84_GBE_RXC__FUNC_GPIO84 (MTK_PIN_NO(84) | 0) +#define MT2712_PIN_84_GBE_RXC__FUNC_GBE_RXC (MTK_PIN_NO(84) | 1) +#define MT2712_PIN_84_GBE_RXC__FUNC_DBG_MON_B_13_ (MTK_PIN_NO(84) | 7) + +#define MT2712_PIN_85_GBE_MDC__FUNC_GPIO85 (MTK_PIN_NO(85) | 0) +#define MT2712_PIN_85_GBE_MDC__FUNC_GBE_MDC (MTK_PIN_NO(85) | 1) +#define MT2712_PIN_85_GBE_MDC__FUNC_DBG_MON_B_14_ (MTK_PIN_NO(85) | 7) + +#define MT2712_PIN_86_GBE_MDIO__FUNC_GPIO86 (MTK_PIN_NO(86) | 0) +#define MT2712_PIN_86_GBE_MDIO__FUNC_GBE_MDIO (MTK_PIN_NO(86) | 1) +#define MT2712_PIN_86_GBE_MDIO__FUNC_DBG_MON_B_15_ (MTK_PIN_NO(86) | 7) + +#define MT2712_PIN_87_GBE_COL__FUNC_GPIO87 (MTK_PIN_NO(87) | 0) +#define MT2712_PIN_87_GBE_COL__FUNC_GBE_COL (MTK_PIN_NO(87) | 1) +#define MT2712_PIN_87_GBE_COL__FUNC_DBG_MON_B_16_ (MTK_PIN_NO(87) | 7) + +#define MT2712_PIN_88_GBE_INTR__FUNC_GPIO88 (MTK_PIN_NO(88) | 0) +#define MT2712_PIN_88_GBE_INTR__FUNC_GBE_INTR (MTK_PIN_NO(88) | 1) +#define MT2712_PIN_88_GBE_INTR__FUNC_GBE_CRS (MTK_PIN_NO(88) | 2) +#define MT2712_PIN_88_GBE_INTR__FUNC_DBG_MON_B_17_ (MTK_PIN_NO(88) | 7) + +#define MT2712_PIN_89_MSDC2_CLK__FUNC_GPIO89 (MTK_PIN_NO(89) | 0) +#define MT2712_PIN_89_MSDC2_CLK__FUNC_MSDC2_CLK (MTK_PIN_NO(89) | 1) +#define MT2712_PIN_89_MSDC2_CLK__FUNC_DBG_MON_B_18_ (MTK_PIN_NO(89) | 7) + +#define MT2712_PIN_90_MSDC2_DAT3__FUNC_GPIO90 (MTK_PIN_NO(90) | 0) +#define MT2712_PIN_90_MSDC2_DAT3__FUNC_MSDC2_DAT3 (MTK_PIN_NO(90) | 1) +#define MT2712_PIN_90_MSDC2_DAT3__FUNC_DBG_MON_B_19_ (MTK_PIN_NO(90) | 7) + +#define MT2712_PIN_91_MSDC2_DAT2__FUNC_GPIO91 (MTK_PIN_NO(91) | 0) +#define MT2712_PIN_91_MSDC2_DAT2__FUNC_MSDC2_DAT2 (MTK_PIN_NO(91) | 1) +#define MT2712_PIN_91_MSDC2_DAT2__FUNC_DBG_MON_B_20_ (MTK_PIN_NO(91) | 7) + +#define MT2712_PIN_92_MSDC2_DAT1__FUNC_GPIO92 (MTK_PIN_NO(92) | 0) +#define MT2712_PIN_92_MSDC2_DAT1__FUNC_MSDC2_DAT1 (MTK_PIN_NO(92) | 1) +#define MT2712_PIN_92_MSDC2_DAT1__FUNC_DBG_MON_B_21_ (MTK_PIN_NO(92) | 7) + +#define MT2712_PIN_93_MSDC2_DAT0__FUNC_GPIO93 (MTK_PIN_NO(93) | 0) +#define MT2712_PIN_93_MSDC2_DAT0__FUNC_MSDC2_DAT0 (MTK_PIN_NO(93) | 1) +#define MT2712_PIN_93_MSDC2_DAT0__FUNC_DBG_MON_B_22_ (MTK_PIN_NO(93) | 7) + +#define MT2712_PIN_94_MSDC2_INS__FUNC_GPIO94 (MTK_PIN_NO(94) | 0) +#define MT2712_PIN_94_MSDC2_INS__FUNC_DBG_MON_B_23_ (MTK_PIN_NO(94) | 7) + +#define MT2712_PIN_95_MSDC2_CMD__FUNC_GPIO95 (MTK_PIN_NO(95) | 0) +#define MT2712_PIN_95_MSDC2_CMD__FUNC_MSDC2_CMD (MTK_PIN_NO(95) | 1) +#define MT2712_PIN_95_MSDC2_CMD__FUNC_DBG_MON_B_24_ (MTK_PIN_NO(95) | 7) + +#define MT2712_PIN_96_MSDC2_PSW__FUNC_GPIO96 (MTK_PIN_NO(96) | 0) +#define MT2712_PIN_96_MSDC2_PSW__FUNC_DBG_MON_B_25_ (MTK_PIN_NO(96) | 7) + +#define MT2712_PIN_97_URXD4__FUNC_GPIO97 (MTK_PIN_NO(97) | 0) +#define MT2712_PIN_97_URXD4__FUNC_URXD4 (MTK_PIN_NO(97) | 1) +#define MT2712_PIN_97_URXD4__FUNC_UTXD4 (MTK_PIN_NO(97) | 2) +#define MT2712_PIN_97_URXD4__FUNC_MRG_CLK (MTK_PIN_NO(97) | 3) +#define MT2712_PIN_97_URXD4__FUNC_PCM1_CLK (MTK_PIN_NO(97) | 4) +#define MT2712_PIN_97_URXD4__FUNC_I2S_IQ2_SDQB (MTK_PIN_NO(97) | 5) +#define MT2712_PIN_97_URXD4__FUNC_I2SO1_WS (MTK_PIN_NO(97) | 6) +#define MT2712_PIN_97_URXD4__FUNC_DBG_MON_B_26_ (MTK_PIN_NO(97) | 7) + +#define MT2712_PIN_98_URTS4__FUNC_GPIO98 (MTK_PIN_NO(98) | 0) +#define MT2712_PIN_98_URTS4__FUNC_URTS4 (MTK_PIN_NO(98) | 1) +#define MT2712_PIN_98_URTS4__FUNC_UCTS4 (MTK_PIN_NO(98) | 2) +#define MT2712_PIN_98_URTS4__FUNC_MRG_RX (MTK_PIN_NO(98) | 3) +#define MT2712_PIN_98_URTS4__FUNC_PCM1_DI (MTK_PIN_NO(98) | 4) +#define MT2712_PIN_98_URTS4__FUNC_I2S_IQ1_SDIB (MTK_PIN_NO(98) | 5) +#define MT2712_PIN_98_URTS4__FUNC_I2SO1_MCK (MTK_PIN_NO(98) | 6) +#define MT2712_PIN_98_URTS4__FUNC_DBG_MON_B_27_ (MTK_PIN_NO(98) | 7) + +#define MT2712_PIN_99_UTXD4__FUNC_GPIO99 (MTK_PIN_NO(99) | 0) +#define MT2712_PIN_99_UTXD4__FUNC_UTXD4 (MTK_PIN_NO(99) | 1) +#define MT2712_PIN_99_UTXD4__FUNC_URXD4 (MTK_PIN_NO(99) | 2) +#define MT2712_PIN_99_UTXD4__FUNC_MRG_SYNC (MTK_PIN_NO(99) | 3) +#define MT2712_PIN_99_UTXD4__FUNC_PCM1_SYNC (MTK_PIN_NO(99) | 4) +#define MT2712_PIN_99_UTXD4__FUNC_I2S_IQ0_SDQB (MTK_PIN_NO(99) | 5) +#define MT2712_PIN_99_UTXD4__FUNC_I2SO1_BCK (MTK_PIN_NO(99) | 6) +#define MT2712_PIN_99_UTXD4__FUNC_DBG_MON_B_28_ (MTK_PIN_NO(99) | 7) + +#define MT2712_PIN_100_UCTS4__FUNC_GPIO100 (MTK_PIN_NO(100) | 0) +#define MT2712_PIN_100_UCTS4__FUNC_UCTS4 (MTK_PIN_NO(100) | 1) +#define MT2712_PIN_100_UCTS4__FUNC_URTS4 (MTK_PIN_NO(100) | 2) +#define MT2712_PIN_100_UCTS4__FUNC_MRG_TX (MTK_PIN_NO(100) | 3) +#define MT2712_PIN_100_UCTS4__FUNC_PCM1_DO (MTK_PIN_NO(100) | 4) +#define MT2712_PIN_100_UCTS4__FUNC_I2S_IQ0_SDIB (MTK_PIN_NO(100) | 5) +#define MT2712_PIN_100_UCTS4__FUNC_I2SO1_DO (MTK_PIN_NO(100) | 6) +#define MT2712_PIN_100_UCTS4__FUNC_DBG_MON_B_29_ (MTK_PIN_NO(100) | 7) + +#define MT2712_PIN_101_URXD5__FUNC_GPIO101 (MTK_PIN_NO(101) | 0) +#define MT2712_PIN_101_URXD5__FUNC_URXD5 (MTK_PIN_NO(101) | 1) +#define MT2712_PIN_101_URXD5__FUNC_UTXD5 (MTK_PIN_NO(101) | 2) +#define MT2712_PIN_101_URXD5__FUNC_I2SO3_WS (MTK_PIN_NO(101) | 3) +#define MT2712_PIN_101_URXD5__FUNC_TDMIN_LRCK (MTK_PIN_NO(101) | 4) +#define MT2712_PIN_101_URXD5__FUNC_I2SO0_WS (MTK_PIN_NO(101) | 6) +#define MT2712_PIN_101_URXD5__FUNC_DBG_MON_B_30_ (MTK_PIN_NO(101) | 7) + +#define MT2712_PIN_102_URTS5__FUNC_GPIO102 (MTK_PIN_NO(102) | 0) +#define MT2712_PIN_102_URTS5__FUNC_URTS5 (MTK_PIN_NO(102) | 1) +#define MT2712_PIN_102_URTS5__FUNC_UCTS5 (MTK_PIN_NO(102) | 2) +#define MT2712_PIN_102_URTS5__FUNC_I2SO3_MCK (MTK_PIN_NO(102) | 3) +#define MT2712_PIN_102_URTS5__FUNC_TDMIN_MCLK (MTK_PIN_NO(102) | 4) +#define MT2712_PIN_102_URTS5__FUNC_IR_IN (MTK_PIN_NO(102) | 5) +#define MT2712_PIN_102_URTS5__FUNC_I2SO0_MCK (MTK_PIN_NO(102) | 6) +#define MT2712_PIN_102_URTS5__FUNC_DBG_MON_B_31_ (MTK_PIN_NO(102) | 7) + +#define MT2712_PIN_103_UTXD5__FUNC_GPIO103 (MTK_PIN_NO(103) | 0) +#define MT2712_PIN_103_UTXD5__FUNC_UTXD5 (MTK_PIN_NO(103) | 1) +#define MT2712_PIN_103_UTXD5__FUNC_URXD5 (MTK_PIN_NO(103) | 2) +#define MT2712_PIN_103_UTXD5__FUNC_I2SO3_BCK (MTK_PIN_NO(103) | 3) +#define MT2712_PIN_103_UTXD5__FUNC_TDMIN_BCK (MTK_PIN_NO(103) | 4) +#define MT2712_PIN_103_UTXD5__FUNC_I2SO0_BCK (MTK_PIN_NO(103) | 6) +#define MT2712_PIN_103_UTXD5__FUNC_DBG_MON_B_32_ (MTK_PIN_NO(103) | 7) + +#define MT2712_PIN_104_UCTS5__FUNC_GPIO104 (MTK_PIN_NO(104) | 0) +#define MT2712_PIN_104_UCTS5__FUNC_UCTS5 (MTK_PIN_NO(104) | 1) +#define MT2712_PIN_104_UCTS5__FUNC_URTS5 (MTK_PIN_NO(104) | 2) +#define MT2712_PIN_104_UCTS5__FUNC_I2SO0_DO1 (MTK_PIN_NO(104) | 3) +#define MT2712_PIN_104_UCTS5__FUNC_TDMIN_DI (MTK_PIN_NO(104) | 4) +#define MT2712_PIN_104_UCTS5__FUNC_IR_IN (MTK_PIN_NO(104) | 5) +#define MT2712_PIN_104_UCTS5__FUNC_I2SO0_DO0 (MTK_PIN_NO(104) | 6) + +#define MT2712_PIN_105_I2C_SDA0__FUNC_GPIO105 (MTK_PIN_NO(105) | 0) +#define MT2712_PIN_105_I2C_SDA0__FUNC_SDA0 (MTK_PIN_NO(105) | 1) + +#define MT2712_PIN_106_I2C_SDA1__FUNC_GPIO106 (MTK_PIN_NO(106) | 0) +#define MT2712_PIN_106_I2C_SDA1__FUNC_SDA1 (MTK_PIN_NO(106) | 1) + +#define MT2712_PIN_107_I2C_SDA2__FUNC_GPIO107 (MTK_PIN_NO(107) | 0) +#define MT2712_PIN_107_I2C_SDA2__FUNC_SDA2 (MTK_PIN_NO(107) | 1) + +#define MT2712_PIN_108_I2C_SDA3__FUNC_GPIO108 (MTK_PIN_NO(108) | 0) +#define MT2712_PIN_108_I2C_SDA3__FUNC_SDA3 (MTK_PIN_NO(108) | 1) + +#define MT2712_PIN_109_I2C_SDA4__FUNC_GPIO109 (MTK_PIN_NO(109) | 0) +#define MT2712_PIN_109_I2C_SDA4__FUNC_SDA4 (MTK_PIN_NO(109) | 1) + +#define MT2712_PIN_110_I2C_SDA5__FUNC_GPIO110 (MTK_PIN_NO(110) | 0) +#define MT2712_PIN_110_I2C_SDA5__FUNC_SDA5 (MTK_PIN_NO(110) | 1) + +#define MT2712_PIN_111_I2C_SCL0__FUNC_GPIO111 (MTK_PIN_NO(111) | 0) +#define MT2712_PIN_111_I2C_SCL0__FUNC_SCL0 (MTK_PIN_NO(111) | 1) + +#define MT2712_PIN_112_I2C_SCL1__FUNC_GPIO112 (MTK_PIN_NO(112) | 0) +#define MT2712_PIN_112_I2C_SCL1__FUNC_SCL1 (MTK_PIN_NO(112) | 1) + +#define MT2712_PIN_113_I2C_SCL2__FUNC_GPIO113 (MTK_PIN_NO(113) | 0) +#define MT2712_PIN_113_I2C_SCL2__FUNC_SCL2 (MTK_PIN_NO(113) | 1) + +#define MT2712_PIN_114_I2C_SCL3__FUNC_GPIO114 (MTK_PIN_NO(114) | 0) +#define MT2712_PIN_114_I2C_SCL3__FUNC_SCL3 (MTK_PIN_NO(114) | 1) + +#define MT2712_PIN_115_I2C_SCL4__FUNC_GPIO115 (MTK_PIN_NO(115) | 0) +#define MT2712_PIN_115_I2C_SCL4__FUNC_SCL4 (MTK_PIN_NO(115) | 1) + +#define MT2712_PIN_116_I2C_SCL5__FUNC_GPIO116 (MTK_PIN_NO(116) | 0) +#define MT2712_PIN_116_I2C_SCL5__FUNC_SCL5 (MTK_PIN_NO(116) | 1) + +#define MT2712_PIN_117_URXD0__FUNC_GPIO117 (MTK_PIN_NO(117) | 0) +#define MT2712_PIN_117_URXD0__FUNC_URXD0 (MTK_PIN_NO(117) | 1) +#define MT2712_PIN_117_URXD0__FUNC_UTXD0 (MTK_PIN_NO(117) | 2) + +#define MT2712_PIN_118_URXD1__FUNC_GPIO118 (MTK_PIN_NO(118) | 0) +#define MT2712_PIN_118_URXD1__FUNC_URXD1 (MTK_PIN_NO(118) | 1) +#define MT2712_PIN_118_URXD1__FUNC_UTXD1 (MTK_PIN_NO(118) | 2) + +#define MT2712_PIN_119_URXD2__FUNC_GPIO119 (MTK_PIN_NO(119) | 0) +#define MT2712_PIN_119_URXD2__FUNC_URXD2 (MTK_PIN_NO(119) | 1) +#define MT2712_PIN_119_URXD2__FUNC_UTXD2 (MTK_PIN_NO(119) | 2) + +#define MT2712_PIN_120_UTXD0__FUNC_GPIO120 (MTK_PIN_NO(120) | 0) +#define MT2712_PIN_120_UTXD0__FUNC_UTXD0 (MTK_PIN_NO(120) | 1) +#define MT2712_PIN_120_UTXD0__FUNC_URXD0 (MTK_PIN_NO(120) | 2) + +#define MT2712_PIN_121_UTXD1__FUNC_GPIO121 (MTK_PIN_NO(121) | 0) +#define MT2712_PIN_121_UTXD1__FUNC_UTXD1 (MTK_PIN_NO(121) | 1) +#define MT2712_PIN_121_UTXD1__FUNC_URXD1 (MTK_PIN_NO(121) | 2) + +#define MT2712_PIN_122_UTXD2__FUNC_GPIO122 (MTK_PIN_NO(122) | 0) +#define MT2712_PIN_122_UTXD2__FUNC_UTXD2 (MTK_PIN_NO(122) | 1) +#define MT2712_PIN_122_UTXD2__FUNC_URXD2 (MTK_PIN_NO(122) | 2) + +#define MT2712_PIN_123_URXD3__FUNC_GPIO123 (MTK_PIN_NO(123) | 0) +#define MT2712_PIN_123_URXD3__FUNC_URXD3 (MTK_PIN_NO(123) | 1) +#define MT2712_PIN_123_URXD3__FUNC_UTXD3 (MTK_PIN_NO(123) | 2) +#define MT2712_PIN_123_URXD3__FUNC_PURE_HW_PROTECT (MTK_PIN_NO(123) | 3) + +#define MT2712_PIN_124_UTXD3__FUNC_GPIO124 (MTK_PIN_NO(124) | 0) +#define MT2712_PIN_124_UTXD3__FUNC_UTXD3 (MTK_PIN_NO(124) | 1) +#define MT2712_PIN_124_UTXD3__FUNC_URXD3 (MTK_PIN_NO(124) | 2) +#define MT2712_PIN_124_UTXD3__FUNC_PURE_HW_PROTECT (MTK_PIN_NO(124) | 3) + +#define MT2712_PIN_125_URTS3__FUNC_GPIO125 (MTK_PIN_NO(125) | 0) +#define MT2712_PIN_125_URTS3__FUNC_URTS3 (MTK_PIN_NO(125) | 1) +#define MT2712_PIN_125_URTS3__FUNC_UCTS3 (MTK_PIN_NO(125) | 2) +#define MT2712_PIN_125_URTS3__FUNC_WATCH_DOG (MTK_PIN_NO(125) | 3) + +#define MT2712_PIN_126_UCTS3__FUNC_GPIO126 (MTK_PIN_NO(126) | 0) +#define MT2712_PIN_126_UCTS3__FUNC_UCTS3 (MTK_PIN_NO(126) | 1) +#define MT2712_PIN_126_UCTS3__FUNC_URTS3 (MTK_PIN_NO(126) | 2) +#define MT2712_PIN_126_UCTS3__FUNC_SRCLKENA0 (MTK_PIN_NO(126) | 3) + +#define MT2712_PIN_127_SPI2_CSN__FUNC_GPIO127 (MTK_PIN_NO(127) | 0) +#define MT2712_PIN_127_SPI2_CSN__FUNC_SPI_CS_2_ (MTK_PIN_NO(127) | 1) +#define MT2712_PIN_127_SPI2_CSN__FUNC_SPI_CS_1_ (MTK_PIN_NO(127) | 2) + +#define MT2712_PIN_128_SPI2_MO__FUNC_GPIO128 (MTK_PIN_NO(128) | 0) +#define MT2712_PIN_128_SPI2_MO__FUNC_SPI_MO_2_ (MTK_PIN_NO(128) | 1) +#define MT2712_PIN_128_SPI2_MO__FUNC_SPI_SO_1_ (MTK_PIN_NO(128) | 2) + +#define MT2712_PIN_129_SPI2_MI__FUNC_GPIO129 (MTK_PIN_NO(129) | 0) +#define MT2712_PIN_129_SPI2_MI__FUNC_SPI_MI_2_ (MTK_PIN_NO(129) | 1) +#define MT2712_PIN_129_SPI2_MI__FUNC_SPI_SI_1_ (MTK_PIN_NO(129) | 2) + +#define MT2712_PIN_130_SPI2_CK__FUNC_GPIO130 (MTK_PIN_NO(130) | 0) +#define MT2712_PIN_130_SPI2_CK__FUNC_SPI_CK_2_ (MTK_PIN_NO(130) | 1) +#define MT2712_PIN_130_SPI2_CK__FUNC_SPI_CK_1_ (MTK_PIN_NO(130) | 2) + +#define MT2712_PIN_131_SPI3_CSN__FUNC_GPIO131 (MTK_PIN_NO(131) | 0) +#define MT2712_PIN_131_SPI3_CSN__FUNC_SPI_CS_3_ (MTK_PIN_NO(131) | 1) + +#define MT2712_PIN_132_SPI3_MO__FUNC_GPIO132 (MTK_PIN_NO(132) | 0) +#define MT2712_PIN_132_SPI3_MO__FUNC_SPI_MO_3_ (MTK_PIN_NO(132) | 1) + +#define MT2712_PIN_133_SPI3_MI__FUNC_GPIO133 (MTK_PIN_NO(133) | 0) +#define MT2712_PIN_133_SPI3_MI__FUNC_SPI_MI_3_ (MTK_PIN_NO(133) | 1) + +#define MT2712_PIN_134_SPI3_CK__FUNC_GPIO134 (MTK_PIN_NO(134) | 0) +#define MT2712_PIN_134_SPI3_CK__FUNC_SPI_CK_3_ (MTK_PIN_NO(134) | 1) + +#define MT2712_PIN_135_KPROW3__FUNC_GPIO135 (MTK_PIN_NO(135) | 0) +#define MT2712_PIN_135_KPROW3__FUNC_KROW3 (MTK_PIN_NO(135) | 1) +#define MT2712_PIN_135_KPROW3__FUNC_DSIC_TE (MTK_PIN_NO(135) | 2) + +#define MT2712_PIN_136_KPROW4__FUNC_GPIO136 (MTK_PIN_NO(136) | 0) +#define MT2712_PIN_136_KPROW4__FUNC_KROW4 (MTK_PIN_NO(136) | 1) +#define MT2712_PIN_136_KPROW4__FUNC_DSID_TE (MTK_PIN_NO(136) | 2) + +#define MT2712_PIN_137_KPCOL3__FUNC_GPIO137 (MTK_PIN_NO(137) | 0) +#define MT2712_PIN_137_KPCOL3__FUNC_KCOL3 (MTK_PIN_NO(137) | 1) +#define MT2712_PIN_137_KPCOL3__FUNC_DISP2_PWM (MTK_PIN_NO(137) | 2) + +#define MT2712_PIN_138_KPCOL4__FUNC_GPIO138 (MTK_PIN_NO(138) | 0) +#define MT2712_PIN_138_KPCOL4__FUNC_KCOL4 (MTK_PIN_NO(138) | 1) +#define MT2712_PIN_138_KPCOL4__FUNC_LCM_RST2 (MTK_PIN_NO(138) | 2) + +#define MT2712_PIN_139_KPCOL5__FUNC_GPIO139 (MTK_PIN_NO(139) | 0) +#define MT2712_PIN_139_KPCOL5__FUNC_KCOL5 (MTK_PIN_NO(139) | 1) +#define MT2712_PIN_139_KPCOL5__FUNC_DSIA_TE (MTK_PIN_NO(139) | 3) +#define MT2712_PIN_139_KPCOL5__FUNC_PURE_HW_PROTECT (MTK_PIN_NO(139) | 4) + +#define MT2712_PIN_140_KPCOL6__FUNC_GPIO140 (MTK_PIN_NO(140) | 0) +#define MT2712_PIN_140_KPCOL6__FUNC_KCOL6 (MTK_PIN_NO(140) | 1) +#define MT2712_PIN_140_KPCOL6__FUNC_WATCH_DOG (MTK_PIN_NO(140) | 2) +#define MT2712_PIN_140_KPCOL6__FUNC_LCM_RST1 (MTK_PIN_NO(140) | 3) + +#define MT2712_PIN_141_KPROW5__FUNC_GPIO141 (MTK_PIN_NO(141) | 0) +#define MT2712_PIN_141_KPROW5__FUNC_KROW5 (MTK_PIN_NO(141) | 1) +#define MT2712_PIN_141_KPROW5__FUNC_LCM_RST0 (MTK_PIN_NO(141) | 3) +#define MT2712_PIN_141_KPROW5__FUNC_PURE_HW_PROTECT (MTK_PIN_NO(141) | 4) + +#define MT2712_PIN_142_KPROW6__FUNC_GPIO142 (MTK_PIN_NO(142) | 0) +#define MT2712_PIN_142_KPROW6__FUNC_KROW6 (MTK_PIN_NO(142) | 1) +#define MT2712_PIN_142_KPROW6__FUNC_SRCLKENA0 (MTK_PIN_NO(142) | 2) +#define MT2712_PIN_142_KPROW6__FUNC_DSIB_TE (MTK_PIN_NO(142) | 3) + +#define MT2712_PIN_143_JTDO_ICE__FUNC_GPIO143 (MTK_PIN_NO(143) | 0) +#define MT2712_PIN_143_JTDO_ICE__FUNC_JTDO_ICE (MTK_PIN_NO(143) | 1) +#define MT2712_PIN_143_JTDO_ICE__FUNC_DFD_TDO (MTK_PIN_NO(143) | 3) + +#define MT2712_PIN_144_JTCK_ICE__FUNC_GPIO144 (MTK_PIN_NO(144) | 0) +#define MT2712_PIN_144_JTCK_ICE__FUNC_JTCK_ICE (MTK_PIN_NO(144) | 1) +#define MT2712_PIN_144_JTCK_ICE__FUNC_DFD_TCK (MTK_PIN_NO(144) | 3) + +#define MT2712_PIN_145_JTDI_ICE__FUNC_GPIO145 (MTK_PIN_NO(145) | 0) +#define MT2712_PIN_145_JTDI_ICE__FUNC_JTDI_ICE (MTK_PIN_NO(145) | 1) +#define MT2712_PIN_145_JTDI_ICE__FUNC_DFD_TDI (MTK_PIN_NO(145) | 3) + +#define MT2712_PIN_146_JTMS_ICE__FUNC_GPIO146 (MTK_PIN_NO(146) | 0) +#define MT2712_PIN_146_JTMS_ICE__FUNC_JTMS_ICE (MTK_PIN_NO(146) | 1) +#define MT2712_PIN_146_JTMS_ICE__FUNC_DFD_TMS (MTK_PIN_NO(146) | 3) + +#define MT2712_PIN_147_JTRSTB_ICE__FUNC_GPIO147 (MTK_PIN_NO(147) | 0) +#define MT2712_PIN_147_JTRSTB_ICE__FUNC_JTRST_B_ICE (MTK_PIN_NO(147) | 1) +#define MT2712_PIN_147_JTRSTB_ICE__FUNC_DFD_NTRST (MTK_PIN_NO(147) | 3) + +#define MT2712_PIN_148_GPIO148__FUNC_GPIO148 (MTK_PIN_NO(148) | 0) +#define MT2712_PIN_148_GPIO148__FUNC_JTRSTB_CM4 (MTK_PIN_NO(148) | 1) +#define MT2712_PIN_148_GPIO148__FUNC_DFD_NTRST (MTK_PIN_NO(148) | 3) + +#define MT2712_PIN_149_GPIO149__FUNC_GPIO149 (MTK_PIN_NO(149) | 0) +#define MT2712_PIN_149_GPIO149__FUNC_JTCK_CM4 (MTK_PIN_NO(149) | 1) +#define MT2712_PIN_149_GPIO149__FUNC_DFD_TCK (MTK_PIN_NO(149) | 3) + +#define MT2712_PIN_150_GPIO150__FUNC_GPIO150 (MTK_PIN_NO(150) | 0) +#define MT2712_PIN_150_GPIO150__FUNC_JTMS_CM4 (MTK_PIN_NO(150) | 1) +#define MT2712_PIN_150_GPIO150__FUNC_DFD_TMS (MTK_PIN_NO(150) | 3) + +#define MT2712_PIN_151_GPIO151__FUNC_GPIO151 (MTK_PIN_NO(151) | 0) +#define MT2712_PIN_151_GPIO151__FUNC_JTDI_CM4 (MTK_PIN_NO(151) | 1) +#define MT2712_PIN_151_GPIO151__FUNC_DFD_TDI (MTK_PIN_NO(151) | 3) + +#define MT2712_PIN_152_GPIO152__FUNC_GPIO152 (MTK_PIN_NO(152) | 0) +#define MT2712_PIN_152_GPIO152__FUNC_JTDO_CM4 (MTK_PIN_NO(152) | 1) +#define MT2712_PIN_152_GPIO152__FUNC_DFD_TDO (MTK_PIN_NO(152) | 3) + +#define MT2712_PIN_153_SPI0_CSN__FUNC_GPIO153 (MTK_PIN_NO(153) | 0) +#define MT2712_PIN_153_SPI0_CSN__FUNC_SPI_CS_0_ (MTK_PIN_NO(153) | 1) +#define MT2712_PIN_153_SPI0_CSN__FUNC_SRCLKENA0 (MTK_PIN_NO(153) | 2) +#define MT2712_PIN_153_SPI0_CSN__FUNC_UTXD0 (MTK_PIN_NO(153) | 3) +#define MT2712_PIN_153_SPI0_CSN__FUNC_I2SO0_DO1 (MTK_PIN_NO(153) | 4) +#define MT2712_PIN_153_SPI0_CSN__FUNC_TDMO0_DATA1 (MTK_PIN_NO(153) | 6) +#define MT2712_PIN_153_SPI0_CSN__FUNC_I2S_IQ2_SDQB (MTK_PIN_NO(153) | 7) + +#define MT2712_PIN_154_SPI0_MI__FUNC_GPIO154 (MTK_PIN_NO(154) | 0) +#define MT2712_PIN_154_SPI0_MI__FUNC_SPI_MI_0_ (MTK_PIN_NO(154) | 1) +#define MT2712_PIN_154_SPI0_MI__FUNC_SRCLKENA0 (MTK_PIN_NO(154) | 2) +#define MT2712_PIN_154_SPI0_MI__FUNC_URXD0 (MTK_PIN_NO(154) | 3) +#define MT2712_PIN_154_SPI0_MI__FUNC_I2SO0_DO0 (MTK_PIN_NO(154) | 4) +#define MT2712_PIN_154_SPI0_MI__FUNC_I2SO1_DO (MTK_PIN_NO(154) | 5) +#define MT2712_PIN_154_SPI0_MI__FUNC_TDMO0_DATA (MTK_PIN_NO(154) | 6) +#define MT2712_PIN_154_SPI0_MI__FUNC_I2S_IQ1_SDIB (MTK_PIN_NO(154) | 7) + +#define MT2712_PIN_155_SPI0_CK__FUNC_GPIO155 (MTK_PIN_NO(155) | 0) +#define MT2712_PIN_155_SPI0_CK__FUNC_SPI_CK_0_ (MTK_PIN_NO(155) | 1) +#define MT2712_PIN_155_SPI0_CK__FUNC_SC_APBIAS_OFF (MTK_PIN_NO(155) | 2) +#define MT2712_PIN_155_SPI0_CK__FUNC_UTXD1 (MTK_PIN_NO(155) | 3) +#define MT2712_PIN_155_SPI0_CK__FUNC_I2SO0_BCK (MTK_PIN_NO(155) | 4) +#define MT2712_PIN_155_SPI0_CK__FUNC_I2SO1_BCK (MTK_PIN_NO(155) | 5) +#define MT2712_PIN_155_SPI0_CK__FUNC_TDMO0_BCK (MTK_PIN_NO(155) | 6) +#define MT2712_PIN_155_SPI0_CK__FUNC_I2S_IQ0_SDQB (MTK_PIN_NO(155) | 7) + +#define MT2712_PIN_156_SPI0_MO__FUNC_GPIO156 (MTK_PIN_NO(156) | 0) +#define MT2712_PIN_156_SPI0_MO__FUNC_SPI_MO_0_ (MTK_PIN_NO(156) | 1) +#define MT2712_PIN_156_SPI0_MO__FUNC_SC_APBIAS_OFF (MTK_PIN_NO(156) | 2) +#define MT2712_PIN_156_SPI0_MO__FUNC_URXD1 (MTK_PIN_NO(156) | 3) +#define MT2712_PIN_156_SPI0_MO__FUNC_I2SO0_WS (MTK_PIN_NO(156) | 4) +#define MT2712_PIN_156_SPI0_MO__FUNC_I2SO1_WS (MTK_PIN_NO(156) | 5) +#define MT2712_PIN_156_SPI0_MO__FUNC_TDMO0_LRCK (MTK_PIN_NO(156) | 6) +#define MT2712_PIN_156_SPI0_MO__FUNC_I2S_IQ0_SDIB (MTK_PIN_NO(156) | 7) + +#define MT2712_PIN_157_SPI5_CSN__FUNC_GPIO157 (MTK_PIN_NO(157) | 0) +#define MT2712_PIN_157_SPI5_CSN__FUNC_SPI_CS_5_ (MTK_PIN_NO(157) | 1) +#define MT2712_PIN_157_SPI5_CSN__FUNC_LCM_RST0 (MTK_PIN_NO(157) | 2) +#define MT2712_PIN_157_SPI5_CSN__FUNC_UTXD2 (MTK_PIN_NO(157) | 3) +#define MT2712_PIN_157_SPI5_CSN__FUNC_I2SO0_MCK (MTK_PIN_NO(157) | 4) +#define MT2712_PIN_157_SPI5_CSN__FUNC_I2SO1_MCK (MTK_PIN_NO(157) | 5) +#define MT2712_PIN_157_SPI5_CSN__FUNC_TDMO0_MCLK (MTK_PIN_NO(157) | 6) + +#define MT2712_PIN_158_SPI5_MI__FUNC_GPIO158 (MTK_PIN_NO(158) | 0) +#define MT2712_PIN_158_SPI5_MI__FUNC_SPI_MI_5_ (MTK_PIN_NO(158) | 1) +#define MT2712_PIN_158_SPI5_MI__FUNC_DSIA_TE (MTK_PIN_NO(158) | 2) +#define MT2712_PIN_158_SPI5_MI__FUNC_URXD2 (MTK_PIN_NO(158) | 3) + +#define MT2712_PIN_159_SPI5_MO__FUNC_GPIO159 (MTK_PIN_NO(159) | 0) +#define MT2712_PIN_159_SPI5_MO__FUNC_SPI_MO_5_ (MTK_PIN_NO(159) | 1) +#define MT2712_PIN_159_SPI5_MO__FUNC_DSIB_TE (MTK_PIN_NO(159) | 2) +#define MT2712_PIN_159_SPI5_MO__FUNC_UTXD3 (MTK_PIN_NO(159) | 3) + +#define MT2712_PIN_160_SPI5_CK__FUNC_GPIO160 (MTK_PIN_NO(160) | 0) +#define MT2712_PIN_160_SPI5_CK__FUNC_SPI_CK_5_ (MTK_PIN_NO(160) | 1) +#define MT2712_PIN_160_SPI5_CK__FUNC_LCM_RST1 (MTK_PIN_NO(160) | 2) +#define MT2712_PIN_160_SPI5_CK__FUNC_URXD3 (MTK_PIN_NO(160) | 3) + +#define MT2712_PIN_161_SPI1_CSN__FUNC_GPIO161 (MTK_PIN_NO(161) | 0) +#define MT2712_PIN_161_SPI1_CSN__FUNC_SPI_CS_1_ (MTK_PIN_NO(161) | 1) +#define MT2712_PIN_161_SPI1_CSN__FUNC_SPI_CS_4_ (MTK_PIN_NO(161) | 2) +#define MT2712_PIN_161_SPI1_CSN__FUNC_I2S_IQ2_SDQB (MTK_PIN_NO(161) | 4) +#define MT2712_PIN_161_SPI1_CSN__FUNC_I2SO2_DO (MTK_PIN_NO(161) | 5) +#define MT2712_PIN_161_SPI1_CSN__FUNC_TDMO0_DATA1 (MTK_PIN_NO(161) | 6) +#define MT2712_PIN_161_SPI1_CSN__FUNC_I2SO0_DO1 (MTK_PIN_NO(161) | 7) + +#define MT2712_PIN_162_SPI1_SI__FUNC_GPIO162 (MTK_PIN_NO(162) | 0) +#define MT2712_PIN_162_SPI1_SI__FUNC_SPI_SI_1_ (MTK_PIN_NO(162) | 1) +#define MT2712_PIN_162_SPI1_SI__FUNC_SPI_MI_4_ (MTK_PIN_NO(162) | 2) +#define MT2712_PIN_162_SPI1_SI__FUNC_I2S_IQ1_SDIB (MTK_PIN_NO(162) | 4) +#define MT2712_PIN_162_SPI1_SI__FUNC_I2SO2_BCK (MTK_PIN_NO(162) | 5) +#define MT2712_PIN_162_SPI1_SI__FUNC_TDMO0_DATA (MTK_PIN_NO(162) | 6) +#define MT2712_PIN_162_SPI1_SI__FUNC_I2SO0_DO0 (MTK_PIN_NO(162) | 7) + +#define MT2712_PIN_163_SPI1_CK__FUNC_GPIO163 (MTK_PIN_NO(163) | 0) +#define MT2712_PIN_163_SPI1_CK__FUNC_SPI_CK_1_ (MTK_PIN_NO(163) | 1) +#define MT2712_PIN_163_SPI1_CK__FUNC_SPI_CK_4_ (MTK_PIN_NO(163) | 2) +#define MT2712_PIN_163_SPI1_CK__FUNC_I2S_IQ0_SDQB (MTK_PIN_NO(163) | 4) +#define MT2712_PIN_163_SPI1_CK__FUNC_I2SO2_WS (MTK_PIN_NO(163) | 5) +#define MT2712_PIN_163_SPI1_CK__FUNC_TDMO0_BCK (MTK_PIN_NO(163) | 6) +#define MT2712_PIN_163_SPI1_CK__FUNC_I2SO0_BCK (MTK_PIN_NO(163) | 7) + +#define MT2712_PIN_164_SPI1_SO__FUNC_GPIO164 (MTK_PIN_NO(164) | 0) +#define MT2712_PIN_164_SPI1_SO__FUNC_SPI_SO_1_ (MTK_PIN_NO(164) | 1) +#define MT2712_PIN_164_SPI1_SO__FUNC_SPI_MO_4_ (MTK_PIN_NO(164) | 2) +#define MT2712_PIN_164_SPI1_SO__FUNC_I2S_IQ0_SDIB (MTK_PIN_NO(164) | 4) +#define MT2712_PIN_164_SPI1_SO__FUNC_I2SO2_MCK (MTK_PIN_NO(164) | 5) +#define MT2712_PIN_164_SPI1_SO__FUNC_TDMO0_LRCK (MTK_PIN_NO(164) | 6) +#define MT2712_PIN_164_SPI1_SO__FUNC_I2SO0_WS (MTK_PIN_NO(164) | 7) + +#define MT2712_PIN_165_SPI4_CSN__FUNC_GPIO165 (MTK_PIN_NO(165) | 0) +#define MT2712_PIN_165_SPI4_CSN__FUNC_SPI_CS_4_ (MTK_PIN_NO(165) | 1) +#define MT2712_PIN_165_SPI4_CSN__FUNC_LCM_RST0 (MTK_PIN_NO(165) | 2) +#define MT2712_PIN_165_SPI4_CSN__FUNC_SPI_CS_1_ (MTK_PIN_NO(165) | 3) +#define MT2712_PIN_165_SPI4_CSN__FUNC_UTXD4 (MTK_PIN_NO(165) | 4) +#define MT2712_PIN_165_SPI4_CSN__FUNC_I2SO1_DO (MTK_PIN_NO(165) | 5) +#define MT2712_PIN_165_SPI4_CSN__FUNC_TDMO0_MCLK (MTK_PIN_NO(165) | 6) +#define MT2712_PIN_165_SPI4_CSN__FUNC_I2SO0_MCK (MTK_PIN_NO(165) | 7) + +#define MT2712_PIN_166_SPI4_MI__FUNC_GPIO166 (MTK_PIN_NO(166) | 0) +#define MT2712_PIN_166_SPI4_MI__FUNC_SPI_MI_4_ (MTK_PIN_NO(166) | 1) +#define MT2712_PIN_166_SPI4_MI__FUNC_DSIA_TE (MTK_PIN_NO(166) | 2) +#define MT2712_PIN_166_SPI4_MI__FUNC_SPI_SI_1_ (MTK_PIN_NO(166) | 3) +#define MT2712_PIN_166_SPI4_MI__FUNC_URXD4 (MTK_PIN_NO(166) | 4) +#define MT2712_PIN_166_SPI4_MI__FUNC_I2SO1_BCK (MTK_PIN_NO(166) | 5) + +#define MT2712_PIN_167_SPI4_MO__FUNC_GPIO167 (MTK_PIN_NO(167) | 0) +#define MT2712_PIN_167_SPI4_MO__FUNC_SPI_MO_4_ (MTK_PIN_NO(167) | 1) +#define MT2712_PIN_167_SPI4_MO__FUNC_DSIB_TE (MTK_PIN_NO(167) | 2) +#define MT2712_PIN_167_SPI4_MO__FUNC_SPI_SO_1_ (MTK_PIN_NO(167) | 3) +#define MT2712_PIN_167_SPI4_MO__FUNC_UTXD5 (MTK_PIN_NO(167) | 4) +#define MT2712_PIN_167_SPI4_MO__FUNC_I2SO1_WS (MTK_PIN_NO(167) | 5) + +#define MT2712_PIN_168_SPI4_CK__FUNC_GPIO168 (MTK_PIN_NO(168) | 0) +#define MT2712_PIN_168_SPI4_CK__FUNC_SPI_CK_4_ (MTK_PIN_NO(168) | 1) +#define MT2712_PIN_168_SPI4_CK__FUNC_LCM_RST1 (MTK_PIN_NO(168) | 2) +#define MT2712_PIN_168_SPI4_CK__FUNC_SPI_CK_1_ (MTK_PIN_NO(168) | 3) +#define MT2712_PIN_168_SPI4_CK__FUNC_URXD5 (MTK_PIN_NO(168) | 4) +#define MT2712_PIN_168_SPI4_CK__FUNC_I2SO1_MCK (MTK_PIN_NO(168) | 5) + +#define MT2712_PIN_169_I2SI0_DATA__FUNC_GPIO169 (MTK_PIN_NO(169) | 0) +#define MT2712_PIN_169_I2SI0_DATA__FUNC_I2SI0_DI (MTK_PIN_NO(169) | 1) +#define MT2712_PIN_169_I2SI0_DATA__FUNC_I2SI1_DI (MTK_PIN_NO(169) | 2) +#define MT2712_PIN_169_I2SI0_DATA__FUNC_I2SI2_DI (MTK_PIN_NO(169) | 3) +#define MT2712_PIN_169_I2SI0_DATA__FUNC_TDMIN_DI (MTK_PIN_NO(169) | 4) + +#define MT2712_PIN_170_I2SI0_LRCK__FUNC_GPIO170 (MTK_PIN_NO(170) | 0) +#define MT2712_PIN_170_I2SI0_LRCK__FUNC_I2SI0_WS (MTK_PIN_NO(170) | 1) +#define MT2712_PIN_170_I2SI0_LRCK__FUNC_I2SI1_WS (MTK_PIN_NO(170) | 2) +#define MT2712_PIN_170_I2SI0_LRCK__FUNC_I2SI2_WS (MTK_PIN_NO(170) | 3) +#define MT2712_PIN_170_I2SI0_LRCK__FUNC_TDMIN_LRCK (MTK_PIN_NO(170) | 4) +#define MT2712_PIN_170_I2SI0_LRCK__FUNC_TDMO0_DATA3 (MTK_PIN_NO(170) | 5) +#define MT2712_PIN_170_I2SI0_LRCK__FUNC_TDMO1_DATA3 (MTK_PIN_NO(170) | 6) + +#define MT2712_PIN_171_I2SI0_MCLK__FUNC_GPIO171 (MTK_PIN_NO(171) | 0) +#define MT2712_PIN_171_I2SI0_MCLK__FUNC_I2SI0_MCK (MTK_PIN_NO(171) | 1) +#define MT2712_PIN_171_I2SI0_MCLK__FUNC_I2SI1_MCK (MTK_PIN_NO(171) | 2) +#define MT2712_PIN_171_I2SI0_MCLK__FUNC_I2SI2_MCK (MTK_PIN_NO(171) | 3) +#define MT2712_PIN_171_I2SI0_MCLK__FUNC_TDMIN_MCLK (MTK_PIN_NO(171) | 4) +#define MT2712_PIN_171_I2SI0_MCLK__FUNC_TDMO0_DATA2 (MTK_PIN_NO(171) | 5) +#define MT2712_PIN_171_I2SI0_MCLK__FUNC_TDMO1_DATA2 (MTK_PIN_NO(171) | 6) + +#define MT2712_PIN_172_I2SI0_BCK__FUNC_GPIO172 (MTK_PIN_NO(172) | 0) +#define MT2712_PIN_172_I2SI0_BCK__FUNC_I2SI0_BCK (MTK_PIN_NO(172) | 1) +#define MT2712_PIN_172_I2SI0_BCK__FUNC_I2SI1_BCK (MTK_PIN_NO(172) | 2) +#define MT2712_PIN_172_I2SI0_BCK__FUNC_I2SI2_BCK (MTK_PIN_NO(172) | 3) +#define MT2712_PIN_172_I2SI0_BCK__FUNC_TDMIN_BCK (MTK_PIN_NO(172) | 4) +#define MT2712_PIN_172_I2SI0_BCK__FUNC_TDMO0_DATA1 (MTK_PIN_NO(172) | 5) +#define MT2712_PIN_172_I2SI0_BCK__FUNC_TDMO1_DATA1 (MTK_PIN_NO(172) | 6) + +#define MT2712_PIN_173_I2SI2_DATA__FUNC_GPIO173 (MTK_PIN_NO(173) | 0) +#define MT2712_PIN_173_I2SI2_DATA__FUNC_I2SI2_DI (MTK_PIN_NO(173) | 1) +#define MT2712_PIN_173_I2SI2_DATA__FUNC_I2SI0_DI (MTK_PIN_NO(173) | 2) +#define MT2712_PIN_173_I2SI2_DATA__FUNC_I2SI1_DI (MTK_PIN_NO(173) | 3) +#define MT2712_PIN_173_I2SI2_DATA__FUNC_PCM1_DI (MTK_PIN_NO(173) | 4) +#define MT2712_PIN_173_I2SI2_DATA__FUNC_TDMIN_DI (MTK_PIN_NO(173) | 5) +#define MT2712_PIN_173_I2SI2_DATA__FUNC_PCM1_DO (MTK_PIN_NO(173) | 6) + +#define MT2712_PIN_174_I2SI2_MCLK__FUNC_GPIO174 (MTK_PIN_NO(174) | 0) +#define MT2712_PIN_174_I2SI2_MCLK__FUNC_I2SI2_MCK (MTK_PIN_NO(174) | 1) +#define MT2712_PIN_174_I2SI2_MCLK__FUNC_I2SI0_MCK (MTK_PIN_NO(174) | 2) +#define MT2712_PIN_174_I2SI2_MCLK__FUNC_I2SI1_MCK (MTK_PIN_NO(174) | 3) +#define MT2712_PIN_174_I2SI2_MCLK__FUNC_PCM1_DO (MTK_PIN_NO(174) | 4) +#define MT2712_PIN_174_I2SI2_MCLK__FUNC_TDMIN_MCLK (MTK_PIN_NO(174) | 5) +#define MT2712_PIN_174_I2SI2_MCLK__FUNC_PCM1_DI (MTK_PIN_NO(174) | 6) +#define MT2712_PIN_174_I2SI2_MCLK__FUNC_I2S_IQ2_SDQB (MTK_PIN_NO(174) | 7) + +#define MT2712_PIN_175_I2SI2_BCK__FUNC_GPIO175 (MTK_PIN_NO(175) | 0) +#define MT2712_PIN_175_I2SI2_BCK__FUNC_I2SI2_BCK (MTK_PIN_NO(175) | 1) +#define MT2712_PIN_175_I2SI2_BCK__FUNC_I2SI0_BCK (MTK_PIN_NO(175) | 2) +#define MT2712_PIN_175_I2SI2_BCK__FUNC_I2SI1_BCK (MTK_PIN_NO(175) | 3) +#define MT2712_PIN_175_I2SI2_BCK__FUNC_PCM1_CLK (MTK_PIN_NO(175) | 4) +#define MT2712_PIN_175_I2SI2_BCK__FUNC_TDMIN_BCK (MTK_PIN_NO(175) | 5) + +#define MT2712_PIN_176_I2SI2_LRCK__FUNC_GPIO176 (MTK_PIN_NO(176) | 0) +#define MT2712_PIN_176_I2SI2_LRCK__FUNC_I2SI2_WS (MTK_PIN_NO(176) | 1) +#define MT2712_PIN_176_I2SI2_LRCK__FUNC_I2SI0_WS (MTK_PIN_NO(176) | 2) +#define MT2712_PIN_176_I2SI2_LRCK__FUNC_I2SI1_WS (MTK_PIN_NO(176) | 3) +#define MT2712_PIN_176_I2SI2_LRCK__FUNC_PCM1_SYNC (MTK_PIN_NO(176) | 4) +#define MT2712_PIN_176_I2SI2_LRCK__FUNC_TDMIN_LRCK (MTK_PIN_NO(176) | 5) + +#define MT2712_PIN_177_I2SI1_DATA__FUNC_GPIO177 (MTK_PIN_NO(177) | 0) +#define MT2712_PIN_177_I2SI1_DATA__FUNC_I2SI1_DI (MTK_PIN_NO(177) | 1) +#define MT2712_PIN_177_I2SI1_DATA__FUNC_I2SI0_DI (MTK_PIN_NO(177) | 2) +#define MT2712_PIN_177_I2SI1_DATA__FUNC_I2SI2_DI (MTK_PIN_NO(177) | 3) +#define MT2712_PIN_177_I2SI1_DATA__FUNC_TDMIN_DI (MTK_PIN_NO(177) | 4) + +#define MT2712_PIN_178_I2SI1_BCK__FUNC_GPIO178 (MTK_PIN_NO(178) | 0) +#define MT2712_PIN_178_I2SI1_BCK__FUNC_I2SI1_BCK (MTK_PIN_NO(178) | 1) +#define MT2712_PIN_178_I2SI1_BCK__FUNC_I2SI0_BCK (MTK_PIN_NO(178) | 2) +#define MT2712_PIN_178_I2SI1_BCK__FUNC_I2SI2_BCK (MTK_PIN_NO(178) | 3) +#define MT2712_PIN_178_I2SI1_BCK__FUNC_TDMIN_BCK (MTK_PIN_NO(178) | 4) +#define MT2712_PIN_178_I2SI1_BCK__FUNC_TDMO0_DATA3 (MTK_PIN_NO(178) | 5) +#define MT2712_PIN_178_I2SI1_BCK__FUNC_TDMO1_DATA3 (MTK_PIN_NO(178) | 6) + +#define MT2712_PIN_179_I2SI1_LRCK__FUNC_GPIO179 (MTK_PIN_NO(179) | 0) +#define MT2712_PIN_179_I2SI1_LRCK__FUNC_I2SI1_WS (MTK_PIN_NO(179) | 1) +#define MT2712_PIN_179_I2SI1_LRCK__FUNC_I2SI0_WS (MTK_PIN_NO(179) | 2) +#define MT2712_PIN_179_I2SI1_LRCK__FUNC_I2SI2_WS (MTK_PIN_NO(179) | 3) +#define MT2712_PIN_179_I2SI1_LRCK__FUNC_TDMIN_LRCK (MTK_PIN_NO(179) | 4) +#define MT2712_PIN_179_I2SI1_LRCK__FUNC_TDMO0_DATA2 (MTK_PIN_NO(179) | 5) +#define MT2712_PIN_179_I2SI1_LRCK__FUNC_TDMO1_DATA2 (MTK_PIN_NO(179) | 6) + +#define MT2712_PIN_180_I2SI1_MCLK__FUNC_GPIO180 (MTK_PIN_NO(180) | 0) +#define MT2712_PIN_180_I2SI1_MCLK__FUNC_I2SI1_MCK (MTK_PIN_NO(180) | 1) +#define MT2712_PIN_180_I2SI1_MCLK__FUNC_I2SI0_MCK (MTK_PIN_NO(180) | 2) +#define MT2712_PIN_180_I2SI1_MCLK__FUNC_I2SI2_MCK (MTK_PIN_NO(180) | 3) +#define MT2712_PIN_180_I2SI1_MCLK__FUNC_TDMIN_MCLK (MTK_PIN_NO(180) | 4) +#define MT2712_PIN_180_I2SI1_MCLK__FUNC_TDMO0_DATA1 (MTK_PIN_NO(180) | 5) +#define MT2712_PIN_180_I2SI1_MCLK__FUNC_TDMO1_DATA1 (MTK_PIN_NO(180) | 6) +#define MT2712_PIN_180_I2SI1_MCLK__FUNC_I2S_IQ2_SDIB (MTK_PIN_NO(180) | 7) + +#define MT2712_PIN_181_I2SO1_DATA0__FUNC_GPIO181 (MTK_PIN_NO(181) | 0) +#define MT2712_PIN_181_I2SO1_DATA0__FUNC_I2SO1_DO (MTK_PIN_NO(181) | 1) +#define MT2712_PIN_181_I2SO1_DATA0__FUNC_I2SO0_DO0 (MTK_PIN_NO(181) | 2) +#define MT2712_PIN_181_I2SO1_DATA0__FUNC_I2SO2_DO (MTK_PIN_NO(181) | 3) +#define MT2712_PIN_181_I2SO1_DATA0__FUNC_DAI_TX (MTK_PIN_NO(181) | 4) +#define MT2712_PIN_181_I2SO1_DATA0__FUNC_TDMIN_MCLK (MTK_PIN_NO(181) | 5) +#define MT2712_PIN_181_I2SO1_DATA0__FUNC_I2S_IQ2_SDIA (MTK_PIN_NO(181) | 7) + +#define MT2712_PIN_182_I2SO1_BCK__FUNC_GPIO182 (MTK_PIN_NO(182) | 0) +#define MT2712_PIN_182_I2SO1_BCK__FUNC_I2SO1_BCK (MTK_PIN_NO(182) | 1) +#define MT2712_PIN_182_I2SO1_BCK__FUNC_I2SO0_BCK (MTK_PIN_NO(182) | 2) +#define MT2712_PIN_182_I2SO1_BCK__FUNC_I2SO2_BCK (MTK_PIN_NO(182) | 3) +#define MT2712_PIN_182_I2SO1_BCK__FUNC_DAI_SYNC (MTK_PIN_NO(182) | 4) +#define MT2712_PIN_182_I2SO1_BCK__FUNC_TDMIN_BCK (MTK_PIN_NO(182) | 5) +#define MT2712_PIN_182_I2SO1_BCK__FUNC_TDMO0_DATA3 (MTK_PIN_NO(182) | 6) +#define MT2712_PIN_182_I2SO1_BCK__FUNC_I2S_IQ2_BCK (MTK_PIN_NO(182) | 7) + +#define MT2712_PIN_183_I2SO1_LRCK__FUNC_GPIO183 (MTK_PIN_NO(183) | 0) +#define MT2712_PIN_183_I2SO1_LRCK__FUNC_I2SO1_WS (MTK_PIN_NO(183) | 1) +#define MT2712_PIN_183_I2SO1_LRCK__FUNC_I2SO0_WS (MTK_PIN_NO(183) | 2) +#define MT2712_PIN_183_I2SO1_LRCK__FUNC_I2SO2_WS (MTK_PIN_NO(183) | 3) +#define MT2712_PIN_183_I2SO1_LRCK__FUNC_DAI_CLK (MTK_PIN_NO(183) | 4) +#define MT2712_PIN_183_I2SO1_LRCK__FUNC_TDMIN_DI (MTK_PIN_NO(183) | 5) +#define MT2712_PIN_183_I2SO1_LRCK__FUNC_TDMO0_DATA2 (MTK_PIN_NO(183) | 6) +#define MT2712_PIN_183_I2SO1_LRCK__FUNC_I2S_IQ2_WS (MTK_PIN_NO(183) | 7) + +#define MT2712_PIN_184_I2SO1_MCLK__FUNC_GPIO184 (MTK_PIN_NO(184) | 0) +#define MT2712_PIN_184_I2SO1_MCLK__FUNC_I2SO1_MCK (MTK_PIN_NO(184) | 1) +#define MT2712_PIN_184_I2SO1_MCLK__FUNC_I2SO0_MCK (MTK_PIN_NO(184) | 2) +#define MT2712_PIN_184_I2SO1_MCLK__FUNC_I2SO2_MCK (MTK_PIN_NO(184) | 3) +#define MT2712_PIN_184_I2SO1_MCLK__FUNC_DAI_RX (MTK_PIN_NO(184) | 4) +#define MT2712_PIN_184_I2SO1_MCLK__FUNC_TDMIN_LRCK (MTK_PIN_NO(184) | 5) +#define MT2712_PIN_184_I2SO1_MCLK__FUNC_TDMO0_DATA1 (MTK_PIN_NO(184) | 6) +#define MT2712_PIN_184_I2SO1_MCLK__FUNC_I2S_IQ2_SDQA (MTK_PIN_NO(184) | 7) + +#define MT2712_PIN_185_AUD_EXT_CK2__FUNC_GPIO185 (MTK_PIN_NO(185) | 0) +#define MT2712_PIN_185_AUD_EXT_CK2__FUNC_AUD_EXT_CK2 (MTK_PIN_NO(185) | 1) +#define MT2712_PIN_185_AUD_EXT_CK2__FUNC_AUD_EXT_CK1 (MTK_PIN_NO(185) | 2) +#define MT2712_PIN_185_AUD_EXT_CK2__FUNC_I2SO1_DO (MTK_PIN_NO(185) | 3) +#define MT2712_PIN_185_AUD_EXT_CK2__FUNC_I2SI2_DI (MTK_PIN_NO(185) | 4) +#define MT2712_PIN_185_AUD_EXT_CK2__FUNC_MRG_RX (MTK_PIN_NO(185) | 5) +#define MT2712_PIN_185_AUD_EXT_CK2__FUNC_PCM1_DI (MTK_PIN_NO(185) | 6) +#define MT2712_PIN_185_AUD_EXT_CK2__FUNC_I2S_IQ0_SDQB (MTK_PIN_NO(185) | 7) + +#define MT2712_PIN_186_AUD_EXT_CK1__FUNC_GPIO186 (MTK_PIN_NO(186) | 0) +#define MT2712_PIN_186_AUD_EXT_CK1__FUNC_AUD_EXT_CK1 (MTK_PIN_NO(186) | 1) +#define MT2712_PIN_186_AUD_EXT_CK1__FUNC_AUD_EXT_CK2 (MTK_PIN_NO(186) | 2) +#define MT2712_PIN_186_AUD_EXT_CK1__FUNC_I2SO0_DO1 (MTK_PIN_NO(186) | 3) +#define MT2712_PIN_186_AUD_EXT_CK1__FUNC_I2SI1_DI (MTK_PIN_NO(186) | 4) +#define MT2712_PIN_186_AUD_EXT_CK1__FUNC_MRG_TX (MTK_PIN_NO(186) | 5) +#define MT2712_PIN_186_AUD_EXT_CK1__FUNC_PCM1_DO (MTK_PIN_NO(186) | 6) +#define MT2712_PIN_186_AUD_EXT_CK1__FUNC_I2S_IQ0_SDIB (MTK_PIN_NO(186) | 7) + +#define MT2712_PIN_187_I2SO2_BCK__FUNC_GPIO187 (MTK_PIN_NO(187) | 0) +#define MT2712_PIN_187_I2SO2_BCK__FUNC_I2SO2_BCK (MTK_PIN_NO(187) | 1) +#define MT2712_PIN_187_I2SO2_BCK__FUNC_I2SO0_BCK (MTK_PIN_NO(187) | 2) +#define MT2712_PIN_187_I2SO2_BCK__FUNC_I2SO1_BCK (MTK_PIN_NO(187) | 3) +#define MT2712_PIN_187_I2SO2_BCK__FUNC_PCM1_CLK (MTK_PIN_NO(187) | 4) +#define MT2712_PIN_187_I2SO2_BCK__FUNC_MRG_SYNC (MTK_PIN_NO(187) | 5) +#define MT2712_PIN_187_I2SO2_BCK__FUNC_TDMO1_DATA3 (MTK_PIN_NO(187) | 6) +#define MT2712_PIN_187_I2SO2_BCK__FUNC_I2S_IQ0_BCK (MTK_PIN_NO(187) | 7) + +#define MT2712_PIN_188_I2SO2_LRCK__FUNC_GPIO188 (MTK_PIN_NO(188) | 0) +#define MT2712_PIN_188_I2SO2_LRCK__FUNC_I2SO2_WS (MTK_PIN_NO(188) | 1) +#define MT2712_PIN_188_I2SO2_LRCK__FUNC_I2SO0_WS (MTK_PIN_NO(188) | 2) +#define MT2712_PIN_188_I2SO2_LRCK__FUNC_I2SO1_WS (MTK_PIN_NO(188) | 3) +#define MT2712_PIN_188_I2SO2_LRCK__FUNC_PCM1_SYNC (MTK_PIN_NO(188) | 4) +#define MT2712_PIN_188_I2SO2_LRCK__FUNC_MRG_CLK (MTK_PIN_NO(188) | 5) +#define MT2712_PIN_188_I2SO2_LRCK__FUNC_TDMO1_DATA2 (MTK_PIN_NO(188) | 6) +#define MT2712_PIN_188_I2SO2_LRCK__FUNC_I2S_IQ0_WS (MTK_PIN_NO(188) | 7) + +#define MT2712_PIN_189_I2SO2_MCLK__FUNC_GPIO189 (MTK_PIN_NO(189) | 0) +#define MT2712_PIN_189_I2SO2_MCLK__FUNC_I2SO2_MCK (MTK_PIN_NO(189) | 1) +#define MT2712_PIN_189_I2SO2_MCLK__FUNC_I2SO0_MCK (MTK_PIN_NO(189) | 2) +#define MT2712_PIN_189_I2SO2_MCLK__FUNC_I2SO1_MCK (MTK_PIN_NO(189) | 3) +#define MT2712_PIN_189_I2SO2_MCLK__FUNC_PCM1_DO (MTK_PIN_NO(189) | 4) +#define MT2712_PIN_189_I2SO2_MCLK__FUNC_MRG_RX (MTK_PIN_NO(189) | 5) +#define MT2712_PIN_189_I2SO2_MCLK__FUNC_TDMO1_DATA1 (MTK_PIN_NO(189) | 6) +#define MT2712_PIN_189_I2SO2_MCLK__FUNC_I2S_IQ0_SDQA (MTK_PIN_NO(189) | 7) + +#define MT2712_PIN_190_I2SO2_DATA0__FUNC_GPIO190 (MTK_PIN_NO(190) | 0) +#define MT2712_PIN_190_I2SO2_DATA0__FUNC_I2SO2_DO (MTK_PIN_NO(190) | 1) +#define MT2712_PIN_190_I2SO2_DATA0__FUNC_I2SO0_DO0 (MTK_PIN_NO(190) | 2) +#define MT2712_PIN_190_I2SO2_DATA0__FUNC_I2SO1_DO (MTK_PIN_NO(190) | 3) +#define MT2712_PIN_190_I2SO2_DATA0__FUNC_PCM1_DI (MTK_PIN_NO(190) | 4) +#define MT2712_PIN_190_I2SO2_DATA0__FUNC_MRG_TX (MTK_PIN_NO(190) | 5) +#define MT2712_PIN_190_I2SO2_DATA0__FUNC_PCM1_DO (MTK_PIN_NO(190) | 6) +#define MT2712_PIN_190_I2SO2_DATA0__FUNC_I2S_IQ0_SDIA (MTK_PIN_NO(190) | 7) + +#define MT2712_PIN_191_I2SO0_DATA1__FUNC_GPIO191 (MTK_PIN_NO(191) | 0) +#define MT2712_PIN_191_I2SO0_DATA1__FUNC_I2SO0_DO1 (MTK_PIN_NO(191) | 1) +#define MT2712_PIN_191_I2SO0_DATA1__FUNC_I2SI0_DI (MTK_PIN_NO(191) | 2) +#define MT2712_PIN_191_I2SO0_DATA1__FUNC_I2SI1_DI (MTK_PIN_NO(191) | 3) +#define MT2712_PIN_191_I2SO0_DATA1__FUNC_I2SI2_DI (MTK_PIN_NO(191) | 4) +#define MT2712_PIN_191_I2SO0_DATA1__FUNC_DAI_TX (MTK_PIN_NO(191) | 5) +#define MT2712_PIN_191_I2SO0_DATA1__FUNC_I2S_IQ0_SDQB (MTK_PIN_NO(191) | 6) +#define MT2712_PIN_191_I2SO0_DATA1__FUNC_I2S_IQ1_SDQB (MTK_PIN_NO(191) | 7) + +#define MT2712_PIN_192_I2SO0_MCLK__FUNC_GPIO192 (MTK_PIN_NO(192) | 0) +#define MT2712_PIN_192_I2SO0_MCLK__FUNC_I2SO0_MCK (MTK_PIN_NO(192) | 1) +#define MT2712_PIN_192_I2SO0_MCLK__FUNC_I2SO1_MCK (MTK_PIN_NO(192) | 2) +#define MT2712_PIN_192_I2SO0_MCLK__FUNC_I2SO2_MCK (MTK_PIN_NO(192) | 3) +#define MT2712_PIN_192_I2SO0_MCLK__FUNC_USB4_FT_SCL (MTK_PIN_NO(192) | 4) +#define MT2712_PIN_192_I2SO0_MCLK__FUNC_TDMO1_DATA3 (MTK_PIN_NO(192) | 5) +#define MT2712_PIN_192_I2SO0_MCLK__FUNC_I2S_IQ0_SDIB (MTK_PIN_NO(192) | 6) +#define MT2712_PIN_192_I2SO0_MCLK__FUNC_I2S_IQ1_SDQA (MTK_PIN_NO(192) | 7) + +#define MT2712_PIN_193_I2SO0_DATA0__FUNC_GPIO193 (MTK_PIN_NO(193) | 0) +#define MT2712_PIN_193_I2SO0_DATA0__FUNC_I2SO0_DO0 (MTK_PIN_NO(193) | 1) +#define MT2712_PIN_193_I2SO0_DATA0__FUNC_I2SO1_DO (MTK_PIN_NO(193) | 2) +#define MT2712_PIN_193_I2SO0_DATA0__FUNC_I2SO2_DO (MTK_PIN_NO(193) | 3) +#define MT2712_PIN_193_I2SO0_DATA0__FUNC_USB4_FT_SDA (MTK_PIN_NO(193) | 4) +#define MT2712_PIN_193_I2SO0_DATA0__FUNC_I2S_IQ1_SDIA (MTK_PIN_NO(193) | 7) + +#define MT2712_PIN_194_I2SO0_LRCK__FUNC_GPIO194 (MTK_PIN_NO(194) | 0) +#define MT2712_PIN_194_I2SO0_LRCK__FUNC_I2SO0_WS (MTK_PIN_NO(194) | 1) +#define MT2712_PIN_194_I2SO0_LRCK__FUNC_I2SO1_WS (MTK_PIN_NO(194) | 2) +#define MT2712_PIN_194_I2SO0_LRCK__FUNC_I2SO2_WS (MTK_PIN_NO(194) | 3) +#define MT2712_PIN_194_I2SO0_LRCK__FUNC_USB5_FT_SCL (MTK_PIN_NO(194) | 4) +#define MT2712_PIN_194_I2SO0_LRCK__FUNC_TDMO1_DATA2 (MTK_PIN_NO(194) | 5) +#define MT2712_PIN_194_I2SO0_LRCK__FUNC_I2S_IQ1_WS (MTK_PIN_NO(194) | 7) + +#define MT2712_PIN_195_I2SO0_BCK__FUNC_GPIO195 (MTK_PIN_NO(195) | 0) +#define MT2712_PIN_195_I2SO0_BCK__FUNC_I2SO0_BCK (MTK_PIN_NO(195) | 1) +#define MT2712_PIN_195_I2SO0_BCK__FUNC_I2SO1_BCK (MTK_PIN_NO(195) | 2) +#define MT2712_PIN_195_I2SO0_BCK__FUNC_I2SO2_BCK (MTK_PIN_NO(195) | 3) +#define MT2712_PIN_195_I2SO0_BCK__FUNC_USB5_FT_SDA (MTK_PIN_NO(195) | 4) +#define MT2712_PIN_195_I2SO0_BCK__FUNC_TDMO1_DATA1 (MTK_PIN_NO(195) | 5) +#define MT2712_PIN_195_I2SO0_BCK__FUNC_I2S_IQ1_BCK (MTK_PIN_NO(195) | 7) + +#define MT2712_PIN_196_TDMO1_MCLK__FUNC_GPIO196 (MTK_PIN_NO(196) | 0) +#define MT2712_PIN_196_TDMO1_MCLK__FUNC_TDMO1_MCLK (MTK_PIN_NO(196) | 1) +#define MT2712_PIN_196_TDMO1_MCLK__FUNC_TDMO0_MCLK (MTK_PIN_NO(196) | 2) +#define MT2712_PIN_196_TDMO1_MCLK__FUNC_TDMIN_MCLK (MTK_PIN_NO(196) | 3) +#define MT2712_PIN_196_TDMO1_MCLK__FUNC_I2SO0_DO1 (MTK_PIN_NO(196) | 6) +#define MT2712_PIN_196_TDMO1_MCLK__FUNC_I2S_IQ1_SDIB (MTK_PIN_NO(196) | 7) + +#define MT2712_PIN_197_TDMO1_LRCK__FUNC_GPIO197 (MTK_PIN_NO(197) | 0) +#define MT2712_PIN_197_TDMO1_LRCK__FUNC_TDMO1_LRCK (MTK_PIN_NO(197) | 1) +#define MT2712_PIN_197_TDMO1_LRCK__FUNC_TDMO0_LRCK (MTK_PIN_NO(197) | 2) +#define MT2712_PIN_197_TDMO1_LRCK__FUNC_TDMIN_LRCK (MTK_PIN_NO(197) | 3) +#define MT2712_PIN_197_TDMO1_LRCK__FUNC_TDMO0_DATA3 (MTK_PIN_NO(197) | 4) +#define MT2712_PIN_197_TDMO1_LRCK__FUNC_TDMO1_DATA3 (MTK_PIN_NO(197) | 5) +#define MT2712_PIN_197_TDMO1_LRCK__FUNC_I2SO3_MCK (MTK_PIN_NO(197) | 6) +#define MT2712_PIN_197_TDMO1_LRCK__FUNC_TDMO1_DATA2 (MTK_PIN_NO(197) | 7) + +#define MT2712_PIN_198_TDMO1_BCK__FUNC_GPIO198 (MTK_PIN_NO(198) | 0) +#define MT2712_PIN_198_TDMO1_BCK__FUNC_TDMO1_BCK (MTK_PIN_NO(198) | 1) +#define MT2712_PIN_198_TDMO1_BCK__FUNC_TDMO0_BCK (MTK_PIN_NO(198) | 2) +#define MT2712_PIN_198_TDMO1_BCK__FUNC_TDMIN_BCK (MTK_PIN_NO(198) | 3) +#define MT2712_PIN_198_TDMO1_BCK__FUNC_TDMO0_DATA2 (MTK_PIN_NO(198) | 4) +#define MT2712_PIN_198_TDMO1_BCK__FUNC_TDMO1_DATA2 (MTK_PIN_NO(198) | 5) +#define MT2712_PIN_198_TDMO1_BCK__FUNC_I2SO3_BCK (MTK_PIN_NO(198) | 6) +#define MT2712_PIN_198_TDMO1_BCK__FUNC_TDMO1_DATA1 (MTK_PIN_NO(198) | 7) + +#define MT2712_PIN_199_TDMO1_DATA__FUNC_GPIO199 (MTK_PIN_NO(199) | 0) +#define MT2712_PIN_199_TDMO1_DATA__FUNC_TDMO1_DATA (MTK_PIN_NO(199) | 1) +#define MT2712_PIN_199_TDMO1_DATA__FUNC_TDMO0_DATA (MTK_PIN_NO(199) | 2) +#define MT2712_PIN_199_TDMO1_DATA__FUNC_TDMIN_DI (MTK_PIN_NO(199) | 3) +#define MT2712_PIN_199_TDMO1_DATA__FUNC_TDMO0_DATA1 (MTK_PIN_NO(199) | 4) +#define MT2712_PIN_199_TDMO1_DATA__FUNC_TDMO1_DATA1 (MTK_PIN_NO(199) | 5) +#define MT2712_PIN_199_TDMO1_DATA__FUNC_I2SO3_WS (MTK_PIN_NO(199) | 6) + +#define MT2712_PIN_200_TDMO0_MCLK__FUNC_GPIO200 (MTK_PIN_NO(200) | 0) +#define MT2712_PIN_200_TDMO0_MCLK__FUNC_TDMO0_MCLK0 (MTK_PIN_NO(200) | 1) +#define MT2712_PIN_200_TDMO0_MCLK__FUNC_TDMO1_MCLK0 (MTK_PIN_NO(200) | 2) +#define MT2712_PIN_200_TDMO0_MCLK__FUNC_PCM1_DI (MTK_PIN_NO(200) | 3) +#define MT2712_PIN_200_TDMO0_MCLK__FUNC_TDMO0_MCLK1 (MTK_PIN_NO(200) | 4) +#define MT2712_PIN_200_TDMO0_MCLK__FUNC_TDMO1_MCLK1 (MTK_PIN_NO(200) | 5) +#define MT2712_PIN_200_TDMO0_MCLK__FUNC_MRG_TX (MTK_PIN_NO(200) | 6) +#define MT2712_PIN_200_TDMO0_MCLK__FUNC_I2SO2_MCK (MTK_PIN_NO(200) | 7) + +#define MT2712_PIN_201_TDMO0_LRCK__FUNC_GPIO201 (MTK_PIN_NO(201) | 0) +#define MT2712_PIN_201_TDMO0_LRCK__FUNC_TDMO0_LRCK0 (MTK_PIN_NO(201) | 1) +#define MT2712_PIN_201_TDMO0_LRCK__FUNC_TDMO1_LRCK0 (MTK_PIN_NO(201) | 2) +#define MT2712_PIN_201_TDMO0_LRCK__FUNC_PCM1_SYNC (MTK_PIN_NO(201) | 3) +#define MT2712_PIN_201_TDMO0_LRCK__FUNC_TDMO0_LRCK1 (MTK_PIN_NO(201) | 4) +#define MT2712_PIN_201_TDMO0_LRCK__FUNC_TDMO1_LRCK1 (MTK_PIN_NO(201) | 5) +#define MT2712_PIN_201_TDMO0_LRCK__FUNC_MRG_RX (MTK_PIN_NO(201) | 6) +#define MT2712_PIN_201_TDMO0_LRCK__FUNC_I2SO2_WS (MTK_PIN_NO(201) | 7) + +#define MT2712_PIN_202_TDMO0_BCK__FUNC_GPIO202 (MTK_PIN_NO(202) | 0) +#define MT2712_PIN_202_TDMO0_BCK__FUNC_TDMO0_BCK0 (MTK_PIN_NO(202) | 1) +#define MT2712_PIN_202_TDMO0_BCK__FUNC_TDMO1_BCK0 (MTK_PIN_NO(202) | 2) +#define MT2712_PIN_202_TDMO0_BCK__FUNC_PCM1_CLK (MTK_PIN_NO(202) | 3) +#define MT2712_PIN_202_TDMO0_BCK__FUNC_TDMO0_BCK1 (MTK_PIN_NO(202) | 4) +#define MT2712_PIN_202_TDMO0_BCK__FUNC_TDMO1_BCK1 (MTK_PIN_NO(202) | 5) +#define MT2712_PIN_202_TDMO0_BCK__FUNC_MRG_SYNC (MTK_PIN_NO(202) | 6) +#define MT2712_PIN_202_TDMO0_BCK__FUNC_I2SO2_BCK (MTK_PIN_NO(202) | 7) + +#define MT2712_PIN_203_TDMO0_DATA__FUNC_GPIO203 (MTK_PIN_NO(203) | 0) +#define MT2712_PIN_203_TDMO0_DATA__FUNC_TDMO0_DATA0 (MTK_PIN_NO(203) | 1) +#define MT2712_PIN_203_TDMO0_DATA__FUNC_TDMO1_DATA0 (MTK_PIN_NO(203) | 2) +#define MT2712_PIN_203_TDMO0_DATA__FUNC_PCM1_DO (MTK_PIN_NO(203) | 3) +#define MT2712_PIN_203_TDMO0_DATA__FUNC_TDMO0_DATA1 (MTK_PIN_NO(203) | 4) +#define MT2712_PIN_203_TDMO0_DATA__FUNC_TDMO1_DATA1 (MTK_PIN_NO(203) | 5) +#define MT2712_PIN_203_TDMO0_DATA__FUNC_MRG_CLK (MTK_PIN_NO(203) | 6) +#define MT2712_PIN_203_TDMO0_DATA__FUNC_I2SO2_DO (MTK_PIN_NO(203) | 7) + +#define MT2712_PIN_204_PERSTB_P0__FUNC_GPIO204 (MTK_PIN_NO(204) | 0) +#define MT2712_PIN_204_PERSTB_P0__FUNC_PERST_B_P0 (MTK_PIN_NO(204) | 1) + +#define MT2712_PIN_205_CLKREQN_P0__FUNC_GPIO205 (MTK_PIN_NO(205) | 0) +#define MT2712_PIN_205_CLKREQN_P0__FUNC_CLKREQ_N_P0 (MTK_PIN_NO(205) | 1) + +#define MT2712_PIN_206_WAKEEN_P0__FUNC_GPIO206 (MTK_PIN_NO(206) | 0) +#define MT2712_PIN_206_WAKEEN_P0__FUNC_WAKE_EN_P0 (MTK_PIN_NO(206) | 1) + +#define MT2712_PIN_207_PERSTB_P1__FUNC_GPIO207 (MTK_PIN_NO(207) | 0) +#define MT2712_PIN_207_PERSTB_P1__FUNC_PERST_B_P1 (MTK_PIN_NO(207) | 1) + +#define MT2712_PIN_208_CLKREQN_P1__FUNC_GPIO208 (MTK_PIN_NO(208) | 0) +#define MT2712_PIN_208_CLKREQN_P1__FUNC_CLKREQ_N_P1 (MTK_PIN_NO(208) | 1) + +#define MT2712_PIN_209_WAKEEN_P1__FUNC_GPIO209 (MTK_PIN_NO(209) | 0) +#define MT2712_PIN_209_WAKEEN_P1__FUNC_WAKE_EN_P1 (MTK_PIN_NO(209) | 1) + +#endif /* __DTS_MT2712_PINFUNC_H */ diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi index 9d88f41aefa0..6d8532af8346 100644 --- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/mt2712-power.h> +#include "mt2712-pinfunc.h" / { compatible = "mediatek,mt2712"; @@ -199,6 +200,34 @@ clock-output-names = "clkaud_ext_i_2"; }; + clki2si0_mck_i: oscillator@6 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <30000000>; + clock-output-names = "clki2si0_mck_i"; + }; + + clki2si1_mck_i: oscillator@7 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <30000000>; + clock-output-names = "clki2si1_mck_i"; + }; + + clki2si2_mck_i: oscillator@8 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <30000000>; + clock-output-names = "clki2si2_mck_i"; + }; + + clktdmin_mclk_i: oscillator@9 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <30000000>; + clock-output-names = "clktdmin_mclk_i"; + }; + timer { compatible = "arm,armv8-timer"; interrupt-parent = <&gic>; @@ -230,6 +259,23 @@ #clock-cells = <1>; }; + syscfg_pctl_a: syscfg_pctl_a@10005000 { + compatible = "mediatek,mt2712-pctl-a-syscfg", "syscon"; + reg = <0 0x10005000 0 0x1000>; + }; + + pio: pinctrl@10005000 { + compatible = "mediatek,mt2712-pinctrl"; + reg = <0 0x1000b000 0 0x1000>; + mediatek,pctl-regmap = <&syscfg_pctl_a>; + pins-are-numbered; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + }; + scpsys: scpsys@10006000 { compatible = "mediatek,mt2712-scpsys", "syscon"; #power-domain-cells = <1>; diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts index 45d8655ee423..b7837642c33a 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts +++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts @@ -18,7 +18,7 @@ compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622"; chosen { - bootargs = "console=ttyS0,115200n1"; + bootargs = "console=ttyS0,115200n1 swiotlb=512"; }; cpus { @@ -163,10 +163,17 @@ i2s1_pins: i2s1-pins { mux { function = "i2s"; - groups = "i2s_out_bclk_ws_mclk", + groups = "i2s_out_mclk_bclk_ws", "i2s1_in_data", "i2s1_out_data"; }; + + conf { + pins = "I2S1_IN", "I2S1_OUT", "I2S_BCLK", + "I2S_WS", "I2S_MCLK"; + drive-strength = <12>; + bias-pull-down; + }; }; irrx_pins: irrx-pins { diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi index e9d5130df8d1..9213c966c224 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi @@ -527,6 +527,95 @@ status = "disabled"; }; + audsys: clock-controller@11220000 { + compatible = "mediatek,mt7622-audsys", "syscon"; + reg = <0 0x11220000 0 0x2000>; + #clock-cells = <1>; + + afe: audio-controller { + compatible = "mediatek,mt7622-audio"; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "afe", "asys"; + + clocks = <&infracfg CLK_INFRA_AUDIO_PD>, + <&topckgen CLK_TOP_AUD1_SEL>, + <&topckgen CLK_TOP_AUD2_SEL>, + <&topckgen CLK_TOP_A1SYS_HP_DIV_PD>, + <&topckgen CLK_TOP_A2SYS_HP_DIV_PD>, + <&topckgen CLK_TOP_I2S0_MCK_SEL>, + <&topckgen CLK_TOP_I2S1_MCK_SEL>, + <&topckgen CLK_TOP_I2S2_MCK_SEL>, + <&topckgen CLK_TOP_I2S3_MCK_SEL>, + <&topckgen CLK_TOP_I2S0_MCK_DIV>, + <&topckgen CLK_TOP_I2S1_MCK_DIV>, + <&topckgen CLK_TOP_I2S2_MCK_DIV>, + <&topckgen CLK_TOP_I2S3_MCK_DIV>, + <&topckgen CLK_TOP_I2S0_MCK_DIV_PD>, + <&topckgen CLK_TOP_I2S1_MCK_DIV_PD>, + <&topckgen CLK_TOP_I2S2_MCK_DIV_PD>, + <&topckgen CLK_TOP_I2S3_MCK_DIV_PD>, + <&audsys CLK_AUDIO_I2SO1>, + <&audsys CLK_AUDIO_I2SO2>, + <&audsys CLK_AUDIO_I2SO3>, + <&audsys CLK_AUDIO_I2SO4>, + <&audsys CLK_AUDIO_I2SIN1>, + <&audsys CLK_AUDIO_I2SIN2>, + <&audsys CLK_AUDIO_I2SIN3>, + <&audsys CLK_AUDIO_I2SIN4>, + <&audsys CLK_AUDIO_ASRCO1>, + <&audsys CLK_AUDIO_ASRCO2>, + <&audsys CLK_AUDIO_ASRCO3>, + <&audsys CLK_AUDIO_ASRCO4>, + <&audsys CLK_AUDIO_AFE>, + <&audsys CLK_AUDIO_AFE_CONN>, + <&audsys CLK_AUDIO_A1SYS>, + <&audsys CLK_AUDIO_A2SYS>; + + clock-names = "infra_sys_audio_clk", + "top_audio_mux1_sel", + "top_audio_mux2_sel", + "top_audio_a1sys_hp", + "top_audio_a2sys_hp", + "i2s0_src_sel", + "i2s1_src_sel", + "i2s2_src_sel", + "i2s3_src_sel", + "i2s0_src_div", + "i2s1_src_div", + "i2s2_src_div", + "i2s3_src_div", + "i2s0_mclk_en", + "i2s1_mclk_en", + "i2s2_mclk_en", + "i2s3_mclk_en", + "i2so0_hop_ck", + "i2so1_hop_ck", + "i2so2_hop_ck", + "i2so3_hop_ck", + "i2si0_hop_ck", + "i2si1_hop_ck", + "i2si2_hop_ck", + "i2si3_hop_ck", + "asrc0_out_ck", + "asrc1_out_ck", + "asrc2_out_ck", + "asrc3_out_ck", + "audio_afe_pd", + "audio_afe_conn_pd", + "audio_a1sys_pd", + "audio_a2sys_pd"; + + assigned-clocks = <&topckgen CLK_TOP_A1SYS_HP_SEL>, + <&topckgen CLK_TOP_A2SYS_HP_SEL>, + <&topckgen CLK_TOP_A1SYS_HP_DIV>, + <&topckgen CLK_TOP_A2SYS_HP_DIV>; + assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL>, + <&topckgen CLK_TOP_AUD2PLL>; + assigned-clock-rates = <0>, <0>, <49152000>, <45158400>; + }; + }; + mmc0: mmc@11230000 { compatible = "mediatek,mt7622-mmc"; reg = <0 0x11230000 0 0x1000>; @@ -735,6 +824,16 @@ #reset-cells = <1>; }; + hsdma: dma-controller@1b007000 { + compatible = "mediatek,mt7622-hsdma"; + reg = <0 0x1b007000 0 0x1000>; + interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_LOW>; + clocks = <ðsys CLK_ETH_HSDMA_EN>; + clock-names = "hsdma"; + power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>; + #dma-cells = <1>; + }; + eth: ethernet@1b100000 { compatible = "mediatek,mt7622-eth", "mediatek,mt2701-eth", diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 55ec5ee7f7e8..9319e74b8906 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -6,3 +6,4 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi index 6167af955659..a6ad3d7fe655 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi @@ -4,7 +4,7 @@ &pm8994_gpios { pinctrl-names = "default"; - pinctrl-0 = <&ls_exp_gpio_f>; + pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>; ls_exp_gpio_f: pm8994_gpio5 { pinconf { diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi index 4b8bb026346e..0f829db33efe 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi @@ -117,6 +117,16 @@ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; cd-gpios = <&msmgpio 38 0x1>; + vmmc-supply = <&pm8994_l21>; + vqmmc-supply = <&pm8994_l13>; + status = "okay"; + }; + + phy@627000 { + status = "okay"; + }; + + ufshc@624000 { status = "okay"; }; @@ -169,19 +179,6 @@ pinctrl-0 = <&usb2_vbus_det_gpio>; }; - bt_en: bt-en-1-8v { - pinctrl-names = "default"; - pinctrl-0 = <&bt_en_gpios>; - compatible = "regulator-fixed"; - regulator-name = "bt-en-regulator"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - /* WLAN card specific delay */ - startup-delay-us = <70000>; - enable-active-high; - }; - wlan_en: wlan-en-1-8v { pinctrl-names = "default"; pinctrl-0 = <&wlan_en_gpios>; @@ -198,19 +195,18 @@ }; agnoc@0 { - qcom,pcie@600000 { + pcie@600000 { status = "okay"; perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>; - vddpe-supply = <&wlan_en>; - vddpe1-supply = <&bt_en>; + vddpe-3v3-supply = <&wlan_en>; }; - qcom,pcie@608000 { + pcie@608000 { status = "okay"; perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>; }; - qcom,pcie@610000 { + pcie@610000 { status = "okay"; perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts index 6a838b5d321e..c13ddee8262b 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts @@ -21,6 +21,7 @@ aliases { serial0 = &blsp1_uart5; + serial1 = &blsp1_uart3; }; chosen { @@ -33,20 +34,61 @@ }; soc { - pinctrl@1000000 { - serial_4_pins: serial4_pinmux { - mux { - pins = "gpio23", "gpio24"; - function = "blsp4_uart1"; - bias-disable; - }; + serial@78b3000 { + status = "ok"; + }; + + spi@78b5000 { + status = "ok"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; }; }; - serial@78b3000 { - pinctrl-0 = <&serial_4_pins>; - pinctrl-names = "default"; + serial@78b1000 { + status = "ok"; + }; + + i2c@78b6000 { + status = "ok"; + }; + + dma@7984000 { + status = "ok"; + }; + + nand@79b0000 { + status = "ok"; + + nand@0 { + reg = <0>; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-bus-width = <8>; + }; + }; + + phy@86000 { + status = "ok"; + }; + + phy@8e000 { + status = "ok"; + }; + + pci@20000000 { + status = "ok"; + perst-gpio = <&tlmm 58 0x1>; + }; + + pci@10000000 { status = "ok"; + perst-gpio = <&tlmm 61 0x1>; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index 2bc5dec5614d..18226980f7c3 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -24,7 +24,7 @@ ranges = <0 0 0 0xffffffff>; compatible = "simple-bus"; - pinctrl@1000000 { + tlmm: pinctrl@1000000 { compatible = "qcom,ipq8074-pinctrl"; reg = <0x1000000 0x300000>; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; @@ -32,6 +32,45 @@ #gpio-cells = <0x2>; interrupt-controller; #interrupt-cells = <0x2>; + + serial_4_pins: serial4-pinmux { + pins = "gpio23", "gpio24"; + function = "blsp4_uart1"; + drive-strength = <8>; + bias-disable; + }; + + i2c_0_pins: i2c-0-pinmux { + pins = "gpio42", "gpio43"; + function = "blsp1_i2c"; + drive-strength = <8>; + bias-disable; + }; + + spi_0_pins: spi-0-pins { + pins = "gpio38", "gpio39", "gpio40", "gpio41"; + function = "blsp0_spi"; + drive-strength = <8>; + bias-disable; + }; + + hsuart_pins: hsuart-pins { + pins = "gpio46", "gpio47", "gpio48", "gpio49"; + function = "blsp2_uart"; + drive-strength = <8>; + bias-disable; + }; + + qpic_pins: qpic-pins { + pins = "gpio1", "gpio3", "gpio4", + "gpio5", "gpio6", "gpio7", + "gpio8", "gpio10", "gpio11", + "gpio12", "gpio13", "gpio14", + "gpio15", "gpio16", "gpio17"; + function = "qpic"; + drive-strength = <8>; + bias-disable; + }; }; intc: interrupt-controller@b000000 { @@ -122,6 +161,276 @@ clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + pinctrl-0 = <&serial_4_pins>; + pinctrl-names = "default"; + status = "disabled"; + }; + + blsp_dma: dma@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x7884000 0x2b000>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + blsp1_uart1: serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x78af000 0x200>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp1_uart3: serial@78b1000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x78b1000 0x200>; + interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 4>, + <&blsp_dma 5>; + dma-names = "tx", "rx"; + pinctrl-0 = <&hsuart_pins>; + pinctrl-names = "default"; + status = "disabled"; + }; + + blsp1_spi1: spi@78b5000 { + compatible = "qcom,spi-qup-v2.2.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x78b5000 0x600>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 12>, <&blsp_dma 13>; + dma-names = "tx", "rx"; + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "disabled"; + }; + + blsp1_i2c2: i2c@78b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x78b6000 0x600>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <400000>; + dmas = <&blsp_dma 15>, <&blsp_dma 14>; + dma-names = "rx", "tx"; + pinctrl-0 = <&i2c_0_pins>; + pinctrl-names = "default"; + status = "disabled"; + }; + + blsp1_i2c3: i2c@78b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x78b7000 0x600>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <100000>; + dmas = <&blsp_dma 17>, <&blsp_dma 16>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + qpic_bam: dma@7984000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x7984000 0x1a000>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QPIC_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + status = "disabled"; + }; + + qpic_nand: nand@79b0000 { + compatible = "qcom,ipq8074-nand"; + reg = <0x79b0000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QPIC_CLK>, + <&gcc GCC_QPIC_AHB_CLK>; + clock-names = "core", "aon"; + + dmas = <&qpic_bam 0>, + <&qpic_bam 1>, + <&qpic_bam 2>; + dma-names = "tx", "rx", "cmd"; + pinctrl-0 = <&qpic_pins>; + pinctrl-names = "default"; + status = "disabled"; + }; + + pcie_phy0: phy@86000 { + compatible = "qcom,ipq8074-qmp-pcie-phy"; + reg = <0x86000 0x1000>; + #phy-cells = <0>; + clocks = <&gcc GCC_PCIE0_PIPE_CLK>; + clock-names = "pipe_clk"; + clock-output-names = "pcie20_phy0_pipe_clk"; + + resets = <&gcc GCC_PCIE0_PHY_BCR>, + <&gcc GCC_PCIE0PHY_PHY_BCR>; + reset-names = "phy", + "common"; + status = "disabled"; + }; + + pcie0: pci@20000000 { + compatible = "qcom,pcie-ipq8074"; + reg = <0x20000000 0xf1d + 0x20000f20 0xa8 + 0x80000 0x2000 + 0x20100000 0x1000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + phys = <&pcie_phy0>; + phy-names = "pciephy"; + + ranges = <0x81000000 0 0x20200000 0x20200000 + 0 0x100000 /* downstream I/O */ + 0x82000000 0 0x20300000 0x20300000 + 0 0xd00000>; /* non-prefetchable memory */ + + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 75 + IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 78 + IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 79 + IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 83 + IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>, + <&gcc GCC_PCIE0_AXI_M_CLK>, + <&gcc GCC_PCIE0_AXI_S_CLK>, + <&gcc GCC_PCIE0_AHB_CLK>, + <&gcc GCC_PCIE0_AUX_CLK>; + + clock-names = "iface", + "axi_m", + "axi_s", + "ahb", + "aux"; + resets = <&gcc GCC_PCIE0_PIPE_ARES>, + <&gcc GCC_PCIE0_SLEEP_ARES>, + <&gcc GCC_PCIE0_CORE_STICKY_ARES>, + <&gcc GCC_PCIE0_AXI_MASTER_ARES>, + <&gcc GCC_PCIE0_AXI_SLAVE_ARES>, + <&gcc GCC_PCIE0_AHB_ARES>, + <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>; + reset-names = "pipe", + "sleep", + "sticky", + "axi_m", + "axi_s", + "ahb", + "axi_m_sticky"; + status = "disabled"; + }; + + pcie_phy1: phy@8e000 { + compatible = "qcom,ipq8074-qmp-pcie-phy"; + reg = <0x8e000 0x1000>; + #phy-cells = <0>; + clocks = <&gcc GCC_PCIE1_PIPE_CLK>; + clock-names = "pipe_clk"; + clock-output-names = "pcie20_phy1_pipe_clk"; + + resets = <&gcc GCC_PCIE1_PHY_BCR>, + <&gcc GCC_PCIE1PHY_PHY_BCR>; + reset-names = "phy", + "common"; + status = "disabled"; + }; + + pcie1: pci@10000000 { + compatible = "qcom,pcie-ipq8074"; + reg = <0x10000000 0xf1d + 0x10000f20 0xa8 + 0x88000 0x2000 + 0x10100000 0x1000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + phys = <&pcie_phy1>; + phy-names = "pciephy"; + + ranges = <0x81000000 0 0x10200000 0x10200000 + 0 0x100000 /* downstream I/O */ + 0x82000000 0 0x10300000 0x10300000 + 0 0xd00000>; /* non-prefetchable memory */ + + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 142 + IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 143 + IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 144 + IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 145 + IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>, + <&gcc GCC_PCIE1_AXI_M_CLK>, + <&gcc GCC_PCIE1_AXI_S_CLK>, + <&gcc GCC_PCIE1_AHB_CLK>, + <&gcc GCC_PCIE1_AUX_CLK>; + clock-names = "iface", + "axi_m", + "axi_s", + "ahb", + "aux"; + resets = <&gcc GCC_PCIE1_PIPE_ARES>, + <&gcc GCC_PCIE1_SLEEP_ARES>, + <&gcc GCC_PCIE1_CORE_STICKY_ARES>, + <&gcc GCC_PCIE1_AXI_MASTER_ARES>, + <&gcc GCC_PCIE1_AXI_SLAVE_ARES>, + <&gcc GCC_PCIE1_AHB_ARES>, + <&gcc GCC_PCIE1_AXI_MASTER_STICKY_ARES>; + reset-names = "pipe", + "sleep", + "sticky", + "axi_m", + "axi_s", + "ahb", + "axi_m_sticky"; status = "disabled"; }; }; @@ -175,7 +484,7 @@ pmu { compatible = "arm,armv8-pmuv3"; - interrupts = <GIC_PPI 7 GIC_CPU_MASK_SIMPLE(4)>; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; clocks { diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 66b318e1de80..650f356f69ca 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -179,7 +179,7 @@ pmu { compatible = "arm,cortex-a53-pmu"; - interrupts = <GIC_PPI 7 GIC_CPU_MASK_SIMPLE(4)>; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4)| IRQ_TYPE_LEVEL_HIGH)>; }; thermal-zones { @@ -512,7 +512,7 @@ blsp_i2c2: i2c@78b6000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b6000 0x500>; - interrupts = <GIC_SPI 96 0>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_AHB_CLK>, <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; clock-names = "iface", "core"; @@ -527,7 +527,7 @@ blsp_i2c4: i2c@78b8000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b8000 0x500>; - interrupts = <GIC_SPI 98 0>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_AHB_CLK>, <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>; clock-names = "iface", "core"; @@ -542,7 +542,7 @@ blsp_i2c6: i2c@78ba000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078ba000 0x500>; - interrupts = <GIC_SPI 100 0>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_AHB_CLK>, <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; clock-names = "iface", "core"; @@ -574,7 +574,7 @@ "mi2s-bit-clk3"; #sound-dai-cells = <1>; - interrupts = <0 160 0>; + interrupts = <0 160 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "lpass-irq-lpaif"; reg = <0x07708000 0x10000>; reg-names = "lpass-lpaif"; @@ -594,7 +594,7 @@ reg = <0x07824900 0x11c>, <0x07824000 0x800>; reg-names = "hc_mem", "core_mem"; - interrupts = <0 123 0>, <0 138 0>; + interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>, <0 138 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>, @@ -611,7 +611,7 @@ reg = <0x07864900 0x11c>, <0x07864000 0x800>; reg-names = "hc_mem", "core_mem"; - interrupts = <0 125 0>, <0 221 0>; + interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>, <0 221 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>, @@ -818,7 +818,7 @@ iommu-ctx@2000 { compatible = "qcom,msm-iommu-v1-ns"; reg = <0x2000 0x1000>; - interrupts = <GIC_SPI 242 0>; + interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -862,7 +862,7 @@ "bus_clk", "vsync_clk"; - interrupts = <0 72 0>; + interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts index 454213391671..8c69516f97ed 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts @@ -38,4 +38,21 @@ pinctrl-1 = <&blsp1_uart2_sleep>; }; }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ramoops@1ff00000 { + compatible = "ramoops"; + reg = <0x0 0x1ff00000 0x0 0x40000>; + console-size = <0x10000>; + record-size = <0x10000>; + ftrace-size = <0x10000>; + pmsg-size = <0x20000>; + }; + }; }; + +#include "msm8994-smd-rpm.dtsi" diff --git a/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi index d2a26f0f8d73..31bc9d98e31f 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi @@ -35,4 +35,64 @@ bias-pull-down; }; }; + + /* 0-3 for sdc1 4-6 for sdc2 */ + /* Order of pins */ + /* SDC1: CLK -> 0, CMD -> 1, DATA -> 2, RCLK -> 3 */ + /* SDC2: CLK -> 4, CMD -> 5, DATA -> 6 */ + sdc1_clk_on: clk-on { + pinconf { + pins = "sdc1_clk"; + bias-disable = <0>; /* No pull */ + drive-strength = <16>; /* 16mA */ + }; + }; + + sdc1_clk_off: clk-off { + pinconf { + pins = "sdc1_clk"; + bias-disable = <0>; /* No pull */ + drive-strength = <2>; /* 2mA */ + }; + }; + + sdc1_cmd_on: cmd-on { + pinconf { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <8>; + }; + }; + + sdc1_cmd_off: cmd-off { + pinconf { + pins = "sdc1_cmd"; + bias-pull-up = <0x3>; /* same as 3.10 ?? */ + drive-strength = <2>; /* 2mA */ + }; + }; + + sdc1_data_on: data-on { + pinconf { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <8>; /* 8mA */ + }; + }; + + sdc1_data_off: data-off { + pinconf { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc1_rclk_on: rclk-on { + bias-pull-down; /* pull down */ + }; + + sdc1_rclk_off: rclk-off { + bias-pull-down; /* pull down */ + }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi index 171578747ed0..cf5cacdd624d 100644 --- a/arch/arm64/boot/dts/qcom/msm8992.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi @@ -202,6 +202,31 @@ reg = <0xfc400000 0x2000>; }; + sdhci1: mmc@f9824900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>; + reg-names = "hc_mem", "core_mem"; + + interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>, + <GIC_SPI 138 IRQ_TYPE_NONE>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&clock_gcc GCC_SDCC1_APPS_CLK>, + <&clock_gcc GCC_SDCC1_AHB_CLK>; + clock-names = "core", "iface"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on + &sdc1_rclk_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off + &sdc1_rclk_off>; + + regulator-always-on; + bus-width = <8>; + mmc-hs400-1_8v; + status = "okay"; + }; + rpm_msg_ram: memory@fc428000 { compatible = "qcom,rpm-msg-ram"; reg = <0xfc428000 0x4000>; @@ -231,7 +256,67 @@ }; }; + smd_rpm: smd { + compatible = "qcom,smd"; + rpm { + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + qcom,local-pid = <0>; + qcom,remote-pid = <6>; + + rpm-requests { + compatible = "qcom,rpm-msm8994"; + qcom,smd-channels = "rpm_requests"; + + pm8994-regulators { + compatible = "qcom,rpm-pm8994-regulators"; + + pm8994_s1: s1 {}; + pm8994_s2: s2 {}; + pm8994_s3: s3 {}; + pm8994_s4: s4 {}; + pm8994_s5: s5 {}; + pm8994_s6: s6 {}; + pm8994_s7: s7 {}; + + pm8994_l1: l1 {}; + pm8994_l2: l2 {}; + pm8994_l3: l3 {}; + pm8994_l4: l4 {}; + pm8994_l6: l6 {}; + pm8994_l8: l8 {}; + pm8994_l9: l9 {}; + pm8994_l10: l10 {}; + pm8994_l11: l11 {}; + pm8994_l12: l12 {}; + pm8994_l13: l13 {}; + pm8994_l14: l14 {}; + pm8994_l15: l15 {}; + pm8994_l16: l16 {}; + pm8994_l17: l17 {}; + pm8994_l18: l18 {}; + pm8994_l19: l19 {}; + pm8994_l20: l20 {}; + pm8994_l21: l21 {}; + pm8994_l22: l22 {}; + pm8994_l23: l23 {}; + pm8994_l24: l24 {}; + pm8994_l25: l25 {}; + pm8994_l26: l26 {}; + pm8994_l27: l27 {}; + pm8994_l28: l28 {}; + pm8994_l29: l29 {}; + pm8994_l30: l30 {}; + pm8994_l31: l31 {}; + pm8994_l32: l32 {}; + + pm8994_lvs1: lvs1 {}; + pm8994_lvs2: lvs2 {}; + }; + }; + }; + }; }; - #include "msm8992-pins.dtsi" diff --git a/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi b/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi new file mode 100644 index 000000000000..47ebd16cb680 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi @@ -0,0 +1,276 @@ +/* Copyright (c) 2015, LGE Inc. All rights reserved. + * Copyright (c) 2016, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +&smd_rpm { + rpm { + rpm_requests { + pm8994-regulators { + + vdd_l1-supply = <&pm8994_s1>; + vdd_l2_26_28-supply = <&pm8994_s3>; + vdd_l3_11-supply = <&pm8994_s3>; + vdd_l4_27_31-supply = <&pm8994_s3>; + vdd_l5_7-supply = <&pm8994_s3>; + vdd_l6_12_32-supply = <&pm8994_s5>; + vdd_l8_16_30-supply = <&vreg_vph_pwr>; + vdd_l9_10_18_22-supply = <&vreg_vph_pwr>; + vdd_l13_19_23_24-supply = <&vreg_vph_pwr>; + vdd_l14_15-supply = <&pm8994_s5>; + vdd_l17_29-supply = <&vreg_vph_pwr>; + vdd_l20_21-supply = <&vreg_vph_pwr>; + vdd_l25-supply = <&pm8994_s5>; + vdd_lvs1_2 = <&pm8994_s4>; + + s1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + s2 { + /* TODO */ + }; + + s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + regulator-system-load = <325000>; + }; + + s5 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + + s7 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + l2 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + }; + + l3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l5 { + /* TODO */ + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + /* TODO */ + }; + + l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,init-voltage = <1800000>; + }; + + l11 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + qcom,init-voltage = <1200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,init-voltage = <1800000>; + proxy-supply = <&pm8994_l12>; + qcom,proxy-consumer-enable; + qcom,proxy-consumer-current = <10000>; + status = "okay"; + }; + + l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + qcom,init-voltage = <2950000>; + status = "okay"; + }; + + l14 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + qcom,init-voltage = <1200000>; + proxy-supply = <&pm8994_l14>; + qcom,proxy-consumer-enable; + qcom,proxy-consumer-current = <10000>; + status = "okay"; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,init-voltage = <1800000>; + status = "okay"; + }; + + l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + qcom,init-voltage = <2700000>; + status = "okay"; + }; + + l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + qcom,init-voltage = <2700000>; + status = "okay"; + }; + + l18 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + qcom,init-voltage = <3000000>; + qcom,init-ldo-mode = <1>; + }; + + l19 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,init-voltage = <1800000>; + status = "okay"; + }; + + l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + regulator-boot-on; + regulator-allow-set-load; + regulator-system-load = <570000>; + }; + + l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + qcom,init-voltage = <1800000>; + }; + + l22 { + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + qcom,init-voltage = <3100000>; + }; + + l23 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + qcom,init-voltage = <2800000>; + }; + + l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3150000>; + qcom,init-voltage = <3075000>; + }; + + l25 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,init-voltage = <1800000>; + }; + + l26 { + /* TODO: value from downstream + regulator-min-microvolt = <987500>; + fails to apply */ + }; + + l27 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + qcom,init-voltage = <1050000>; + }; + + l28 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + qcom,init-voltage = <1000000>; + proxy-supply = <&pm8994_l28>; + qcom,proxy-consumer-enable; + qcom,proxy-consumer-current = <10000>; + }; + + l29 { + /* TODO: Unsupported voltage range. + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + qcom,init-voltage = <2800000>; + */ + }; + + l30 { + /* TODO: get this verified + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,init-voltage = <1800000>; + */ + }; + + l31 { + regulator-min-microvolt = <1262500>; + regulator-max-microvolt = <1262500>; + qcom,init-voltage = <1262500>; + }; + + l32 { + /* TODO: get this verified + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,init-voltage = <1800000>; + */ + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index f8e49d0b4681..8c7f9ca25b53 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -447,7 +447,7 @@ blsp2_i2c0: i2c@75b5000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x075b5000 0x1000>; - interrupts = <GIC_SPI 101 0>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP2_AHB_CLK>, <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>; clock-names = "iface", "core"; @@ -478,7 +478,7 @@ blsp2_i2c1: i2c@75b6000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x075b6000 0x1000>; - interrupts = <GIC_SPI 102 0>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP2_AHB_CLK>, <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>; clock-names = "iface", "core"; @@ -503,7 +503,7 @@ blsp1_i2c2: i2c@7577000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x07577000 0x1000>; - interrupts = <GIC_SPI 97 0>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_AHB_CLK>, <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; clock-names = "iface", "core"; @@ -536,7 +536,8 @@ reg = <0x74a4900 0x314>, <0x74a4000 0x800>; reg-names = "hc_mem", "core_mem"; - interrupts = <0 125 0>, <0 221 0>; + interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>, + <0 221 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; clock-names = "iface", "core", "xo"; @@ -633,6 +634,91 @@ #interrupt-cells = <4>; }; + ufsphy: phy@627000 { + compatible = "qcom,msm8996-ufs-phy-qmp-14nm"; + reg = <0x627000 0xda8>; + reg-names = "phy_mem"; + #phy-cells = <0>; + + vdda-phy-supply = <&pm8994_l28>; + vdda-pll-supply = <&pm8994_l12>; + + vdda-phy-max-microamp = <18380>; + vdda-pll-max-microamp = <9440>; + + vddp-ref-clk-supply = <&pm8994_l25>; + vddp-ref-clk-max-microamp = <100>; + vddp-ref-clk-always-on; + + clock-names = "ref_clk_src", "ref_clk"; + clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, + <&gcc GCC_UFS_CLKREF_CLK>; + status = "disabled"; + }; + + ufshc@624000 { + compatible = "qcom,ufshc"; + reg = <0x624000 0x2500>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + + phys = <&ufsphy>; + phy-names = "ufsphy"; + + vcc-supply = <&pm8994_l20>; + vccq-supply = <&pm8994_l25>; + vccq2-supply = <&pm8994_s4>; + + vcc-max-microamp = <600000>; + vccq-max-microamp = <450000>; + vccq2-max-microamp = <450000>; + + power-domains = <&gcc UFS_GDSC>; + + clock-names = + "core_clk_src", + "core_clk", + "bus_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro_src", + "core_clk_unipro", + "core_clk_ice", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk"; + clocks = + <&gcc UFS_AXI_CLK_SRC>, + <&gcc GCC_UFS_AXI_CLK>, + <&gcc GCC_SYS_NOC_UFS_AXI_CLK>, + <&gcc GCC_AGGRE2_UFS_AXI_CLK>, + <&gcc GCC_UFS_AHB_CLK>, + <&gcc UFS_ICE_CORE_CLK_SRC>, + <&gcc GCC_UFS_UNIPRO_CORE_CLK>, + <&gcc GCC_UFS_ICE_CORE_CLK>, + <&rpmcc RPM_SMD_LN_BB_CLK>, + <&gcc GCC_UFS_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_RX_SYMBOL_0_CLK>; + freq-table-hz = + <100000000 200000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>, + <150000000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + + lanes-per-direction = <1>; + status = "disabled"; + + ufs_variant { + compatible = "qcom,ufs_variant"; + }; + }; + mmcc: clock-controller@8c0000 { compatible = "qcom,mmcc-msm8996"; #clock-cells = <1>; @@ -819,7 +905,7 @@ dwc3@7600000 { compatible = "snps,dwc3"; reg = <0x7600000 0xcc00>; - interrupts = <0 138 0>; + interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>; phys = <&hsusb_phy2>; phy-names = "usb2-phy"; }; @@ -848,7 +934,7 @@ dwc3@6a00000 { compatible = "snps,dwc3"; reg = <0x6a00000 0xcc00>; - interrupts = <0 131 0>; + interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>; phys = <&hsusb_phy1>, <&ssusb_phy_0>; phy-names = "usb2-phy", "usb3-phy"; }; @@ -861,7 +947,7 @@ #size-cells = <1>; ranges; - pcie0: qcom,pcie@600000 { + pcie0: pcie@600000 { compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; status = "disabled"; power-domains = <&gcc PCIE0_GDSC>; @@ -882,7 +968,7 @@ ranges = <0x01000000 0x0 0x0c200000 0x0c200000 0x0 0x100000>, <0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>; - interrupts = <GIC_SPI 405 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; @@ -914,7 +1000,7 @@ }; - pcie1: qcom,pcie@608000 { + pcie1: pcie@608000 { compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; power-domains = <&gcc PCIE1_GDSC>; bus-range = <0x00 0xff>; @@ -937,7 +1023,7 @@ ranges = <0x01000000 0x0 0x0d200000 0x0d200000 0x0 0x100000>, <0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>; - interrupts = <GIC_SPI 413 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; @@ -967,7 +1053,7 @@ "bus_slave"; }; - pcie2: qcom,pcie@610000 { + pcie2: pcie@610000 { compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; power-domains = <&gcc PCIE2_GDSC>; bus-range = <0x00 0xff>; @@ -990,7 +1076,7 @@ device_type = "pci"; - interrupts = <GIC_SPI 421 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts new file mode 100644 index 000000000000..979ab49913f1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 MTP board device tree source + * + * Copyright (c) 2018, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include "sdm845.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SDM845 MTP"; + compatible = "qcom,sdm845-mtp"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi new file mode 100644 index 000000000000..cdaabeb3c995 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -0,0 +1,327 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 SoC device tree source + * + * Copyright (c) 2018, The Linux Foundation. All rights reserved. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0 0x80000000 0 0>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + memory@85fc0000 { + reg = <0 0x85fc0000 0 0x20000>; + no-map; + }; + + memory@85fe0000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x85fe0000 0x0 0x20000>; + no-map; + }; + + smem_mem: memory@86000000 { + reg = <0x0 0x86000000 0x0 0x200000>; + no-map; + }; + + memory@86200000 { + reg = <0 0x86200000 0 0x2d00000>; + no-map; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&L2_100>; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x200>; + enable-method = "psci"; + next-level-cache = <&L2_200>; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x300>; + enable-method = "psci"; + next-level-cache = <&L2_300>; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x400>; + enable-method = "psci"; + next-level-cache = <&L2_400>; + L2_400: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x500>; + enable-method = "psci"; + next-level-cache = <&L2_500>; + L2_500: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x600>; + enable-method = "psci"; + next-level-cache = <&L2_600>; + L2_600: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x700>; + enable-method = "psci"; + next-level-cache = <&L2_700>; + L2_700: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>; + }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <38400000>; + clock-output-names = "xo_board"; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32764>; + }; + }; + + tcsr_mutex: hwlock { + compatible = "qcom,tcsr-mutex"; + syscon = <&tcsr_mutex_regs 0 0x1000>; + #hwlock-cells = <1>; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sdm845"; + reg = <0x100000 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + tcsr_mutex_regs: syscon@1f40000 { + compatible = "syscon"; + reg = <0x1f40000 0x40000>; + }; + + tlmm: pinctrl@3400000 { + compatible = "qcom,sdm845-pinctrl"; + reg = <0x03400000 0xc00000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0xc440000 0x1100>, + <0xc600000 0x2000000>, + <0xe600000 0x100000>, + <0xe700000 0xa0000>, + <0xc40a000 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + cell-index = <0>; + }; + + apss_shared: mailbox@17990000 { + compatible = "qcom,sdm845-apss-shared"; + reg = <0x17990000 0x1000>; + #mbox-cells = <1>; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x17a00000 0x10000>, /* GICD */ + <0x17a60000 0x100000>; /* GICR * 8 */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + + gic-its@17a40000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x17a40000 0x20000>; + status = "disabled"; + }; + }; + + timer@17c90000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0x17c90000 0x1000>; + + frame@17ca0000 { + frame-number = <0>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17ca0000 0x1000>, + <0x17cb0000 0x1000>; + }; + + frame@17cc0000 { + frame-number = <1>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17cc0000 0x1000>; + status = "disabled"; + }; + + frame@17cd0000 { + frame-number = <2>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17cd0000 0x1000>; + status = "disabled"; + }; + + frame@17ce0000 { + frame-number = <3>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17ce0000 0x1000>; + status = "disabled"; + }; + + frame@17cf0000 { + frame-number = <4>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17cf0000 0x1000>; + status = "disabled"; + }; + + frame@17d00000 { + frame-number = <5>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17d00000 0x1000>; + status = "disabled"; + }; + + frame@17d10000 { + frame-number = <6>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17d10000 0x1000>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index be2bfbc6b483..b8e9da15e00c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -595,6 +595,8 @@ reg = <0x0 0xff330200 0 0x100>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "h265e_mmu"; + clocks = <&cru ACLK_H265>, <&cru PCLK_H265>; + clock-names = "aclk", "iface"; #iommu-cells = <0>; status = "disabled"; }; @@ -604,6 +606,8 @@ reg = <0x0 0xff340800 0x0 0x40>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "vepu_mmu"; + clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>; + clock-names = "aclk", "iface"; #iommu-cells = <0>; status = "disabled"; }; @@ -613,6 +617,8 @@ reg = <0x0 0xff350800 0x0 0x40>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "vpu_mmu"; + clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>; + clock-names = "aclk", "iface"; #iommu-cells = <0>; status = "disabled"; }; @@ -622,6 +628,8 @@ reg = <0x0 0xff360480 0x0 0x40>, <0x0 0xff3604c0 0x0 0x40>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "rkvdec_mmu"; + clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>; + clock-names = "aclk", "iface"; #iommu-cells = <0>; status = "disabled"; }; @@ -631,6 +639,8 @@ reg = <0x0 0xff373f00 0x0 0x100>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "vop_mmu"; + clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>; + clock-names = "aclk", "iface"; #iommu-cells = <0>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index 03458ac44201..ad91ced78649 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -742,6 +742,8 @@ reg = <0x0 0xff900800 0x0 0x100>; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "iep_mmu"; + clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>; + clock-names = "aclk", "iface"; #iommu-cells = <0>; status = "disabled"; }; @@ -752,6 +754,8 @@ <0x0 0xff915000 0x0 0x100>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "isp_mmu"; + clocks = <&cru ACLK_ISP>, <&cru HCLK_ISP>; + clock-names = "aclk", "iface"; #iommu-cells = <0>; rockchip,disable-mmu-reset; status = "disabled"; @@ -762,6 +766,8 @@ reg = <0x0 0xff930300 0x0 0x100>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "vop_mmu"; + clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>; + clock-names = "aclk", "iface"; #iommu-cells = <0>; status = "disabled"; }; @@ -772,6 +778,8 @@ <0x0 0xff9a0480 0x0 0x40>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hevc_mmu"; + clocks = <&cru ACLK_VIDEO>, <&cru HCLK_VIDEO>; + clock-names = "aclk", "iface"; #iommu-cells = <0>; status = "disabled"; }; @@ -782,6 +790,8 @@ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "vepu_mmu", "vdpu_mmu"; + clocks = <&cru ACLK_VIDEO>, <&cru HCLK_VIDEO>; + clock-names = "aclk", "iface"; #iommu-cells = <0>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts index 4f28628aa091..2a352763c848 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts @@ -662,6 +662,14 @@ status = "okay"; }; +&tcphy0 { + status = "okay"; +}; + +&tcphy1 { + status = "okay"; +}; + &tsadc { /* tshut mode 0:CRU 1:GPIO */ rockchip,hw-tshut-mode = <1>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts index 191a6bcb1704..82179125bfb7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts @@ -255,7 +255,7 @@ ap_i2c_dig: &i2c2 { &ap_i2c_tp { trackpad@4a { - compatible = "atmel,atmel_mxt_tp"; + compatible = "atmel,maxtouch"; reg = <0x4a>; pinctrl-names = "default"; pinctrl-0 = <&trackpad_int_l>; @@ -271,7 +271,7 @@ ap_i2c_dig: &i2c2 { &ap_i2c_ts { touchscreen@4b { - compatible = "atmel,atmel_mxt_ts"; + compatible = "atmel,maxtouch"; reg = <0x4b>; pinctrl-names = "default"; pinctrl-0 = <&touch_int_l>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi index 18f546f2dfd1..f49bfab75dd0 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi @@ -588,7 +588,9 @@ <&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>, <&cru PCLK_PERILP0>, <&cru ACLK_CCI>, <&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>, - <&cru ACLK_VIO>; + <&cru ACLK_VIO>, <&cru ACLK_HDCP>, + <&cru ACLK_GIC_PRE>, + <&cru PCLK_DDR>; assigned-clock-rates = <600000000>, <800000000>, <1000000000>, @@ -597,7 +599,9 @@ <100000000>, <100000000>, <50000000>, <800000000>, <100000000>, <50000000>, - <400000000>; + <400000000>, <400000000>, + <200000000>, + <200000000>; }; &emmc_phy { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts index 7d3e8bfd51dd..e0afdd8b62bd 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts @@ -143,6 +143,11 @@ }; }; +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + &i2c1 { status = "okay"; clock-frequency = <400000>; @@ -246,6 +251,10 @@ status = "okay"; }; +&tcphy0 { + status = "okay"; +}; + &u2phy0 { status = "okay"; }; @@ -281,3 +290,19 @@ &usb_host0_ohci { status = "okay"; }; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index 4a2d06abe9c1..14a0f1998639 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -527,6 +527,10 @@ }; }; +&tcphy1 { + status = "okay"; +}; + &tsadc { rockchip,hw-tshut-mode = <1>; rockchip,hw-tshut-polarity = <1>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts index 56952d1a3fb8..ad7548d3b93d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts @@ -190,6 +190,18 @@ status = "okay"; }; +&pcie_phy { + status = "okay"; +}; + +&pcie0 { + ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>; + num-lanes = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_clkreqn_cpm>; + status = "okay"; +}; + &pinctrl { sdio-pwrseq { wifi_enable_h: wifi-enable-h { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi index e5daed7d2026..941b627094d7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi @@ -471,21 +471,6 @@ gpio1830-supply = <&vcc_3v0>; }; -&pcie_phy { - status = "okay"; -}; - -&pcie0 { - assigned-clocks = <&cru SCLK_PCIEPHY_REF>; - assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>; - assigned-clock-rates = <100000000>; - ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>; - num-lanes = <4>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_clkreqn_cpm>; - status = "okay"; -}; - &pmu_io_domains { pmu1830-supply = <&vcc_3v0>; status = "okay"; @@ -560,6 +545,14 @@ status = "okay"; }; +&tcphy0 { + status = "okay"; +}; + +&tcphy1 { + status = "okay"; +}; + &tsadc { /* tshut mode 0:CRU 1:GPIO */ rockchip,hw-tshut-mode = <1>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 4550c0f82be9..e0040b648f43 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -312,6 +312,8 @@ reg = <0x0 0xfe320000 0x0 0x4000>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>; max-frequency = <150000000>; + assigned-clocks = <&cru HCLK_SD>; + assigned-clock-rates = <200000000>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; @@ -411,8 +413,8 @@ reg = <0x0 0xfe800000 0x0 0x100000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>; dr_mode = "otg"; - phys = <&u2phy0_otg>; - phy-names = "usb2-phy"; + phys = <&u2phy0_otg>, <&tcphy0_usb3>; + phy-names = "usb2-phy", "usb3-phy"; phy_type = "utmi_wide"; snps,dis_enblslpm_quirk; snps,dis-u2-freeclk-exists-quirk; @@ -444,8 +446,8 @@ reg = <0x0 0xfe900000 0x0 0x100000>; interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>; dr_mode = "otg"; - phys = <&u2phy1_otg>; - phy-names = "usb2-phy"; + phys = <&u2phy1_otg>, <&tcphy1_usb3>; + phy-names = "usb2-phy", "usb3-phy"; phy_type = "utmi_wide"; snps,dis_enblslpm_quirk; snps,dis-u2-freeclk-exists-quirk; @@ -461,8 +463,8 @@ compatible = "rockchip,rk3399-cdn-dp"; reg = <0x0 0xfec00000 0x0 0x100000>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>; - assigned-clocks = <&cru SCLK_DP_CORE>; - assigned-clock-rates = <100000000>; + assigned-clocks = <&cru SCLK_DP_CORE>, <&cru SCLK_SPDIF_REC_DPTX>; + assigned-clock-rates = <100000000>, <200000000>; clocks = <&cru SCLK_DP_CORE>, <&cru PCLK_DP_CTRL>, <&cru SCLK_SPDIF_REC_DPTX>, <&cru PCLK_VIO_GRF>; clock-names = "core-clk", "pclk", "spdif", "grf"; @@ -1234,6 +1236,8 @@ reg = <0x0 0xff650800 0x0 0x40>; interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>; interrupt-names = "vpu_mmu"; + clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; + clock-names = "aclk", "iface"; #iommu-cells = <0>; status = "disabled"; }; @@ -1243,6 +1247,8 @@ reg = <0x0 0xff660480 0x0 0x40>, <0x0 0xff6604c0 0x0 0x40>; interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>; interrupt-names = "vdec_mmu"; + clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>; + clock-names = "aclk", "iface"; #iommu-cells = <0>; status = "disabled"; }; @@ -1252,6 +1258,8 @@ reg = <0x0 0xff670800 0x0 0x40>; interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH 0>; interrupt-names = "iep_mmu"; + clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>; + clock-names = "aclk", "iface"; #iommu-cells = <0>; status = "disabled"; }; @@ -1323,7 +1331,9 @@ <&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>, <&cru PCLK_PERILP0>, <&cru ACLK_CCI>, <&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>, - <&cru ACLK_VIO>; + <&cru ACLK_VIO>, <&cru ACLK_HDCP>, + <&cru ACLK_GIC_PRE>, + <&cru PCLK_DDR>; assigned-clock-rates = <594000000>, <800000000>, <1000000000>, @@ -1332,7 +1342,9 @@ <100000000>, <100000000>, <50000000>, <600000000>, <100000000>, <50000000>, - <400000000>; + <400000000>, <400000000>, + <200000000>, + <200000000>; }; grf: syscon@ff770000 { @@ -1599,7 +1611,7 @@ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>; interrupt-names = "vopl_mmu"; clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>; - clock-names = "aclk", "hclk"; + clock-names = "aclk", "iface"; power-domains = <&power RK3399_PD_VOPL>; #iommu-cells = <0>; status = "disabled"; @@ -1656,7 +1668,7 @@ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>; interrupt-names = "vopb_mmu"; clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>; - clock-names = "aclk", "hclk"; + clock-names = "aclk", "iface"; power-domains = <&power RK3399_PD_VOPB>; #iommu-cells = <0>; status = "disabled"; @@ -1667,6 +1679,8 @@ reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>; interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>; interrupt-names = "isp0_mmu"; + clocks = <&cru ACLK_ISP0_NOC>, <&cru HCLK_ISP0_NOC>; + clock-names = "aclk", "iface"; #iommu-cells = <0>; rockchip,disable-mmu-reset; status = "disabled"; @@ -1677,6 +1691,8 @@ reg = <0x0 0xff924000 0x0 0x100>, <0x0 0xff925000 0x0 0x100>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>; interrupt-names = "isp1_mmu"; + clocks = <&cru ACLK_ISP1_NOC>, <&cru HCLK_ISP1_NOC>; + clock-names = "aclk", "iface"; #iommu-cells = <0>; rockchip,disable-mmu-reset; status = "disabled"; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi index c32dd3419c87..d63b56e944de 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi @@ -549,10 +549,13 @@ status = "disabled"; reg = <0x65000000 0x8500>; interrupts = <0 66 4>; + clock-names = "ether"; clocks = <&sys_clk 6>; + reset-names = "ether"; resets = <&sys_rst 6>; - phy-mode = "rmii"; + phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; + socionext,syscon-phy-mode = <&soc_glue 0>; mdio: mdio { #address-cells = <1>; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi index 3a5ed789c056..0298bd0d0e1a 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi @@ -604,10 +604,13 @@ interrupts = <0 66 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ether_rgmii>; + clock-names = "ether"; clocks = <&sys_clk 6>; + reset-names = "ether"; resets = <&sys_rst 6>; phy-mode = "rgmii"; local-mac-address = [00 00 00 00 00 00]; + socionext,syscon-phy-mode = <&soc_glue 0>; mdio: mdio { #address-cells = <1>; diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi index e85d6ddea3c2..2a4cf427f5d3 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi @@ -341,7 +341,7 @@ cdns,phy-dll-delay-sdclk-hsmmc = <21>; }; - soc-glue@5f800000 { + soc_glue: soc-glue@5f800000 { compatible = "socionext,uniphier-pxs3-soc-glue", "simple-mfd", "syscon"; reg = <0x5f800000 0x2000>; @@ -412,10 +412,13 @@ interrupts = <0 66 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ether_rgmii>; + clock-names = "ether"; clocks = <&sys_clk 6>; + reset-names = "ether"; resets = <&sys_rst 6>; phy-mode = "rgmii"; local-mac-address = [00 00 00 00 00 00]; + socionext,syscon-phy-mode = <&soc_glue 0>; mdio0: mdio { #address-cells = <1>; @@ -430,10 +433,13 @@ interrupts = <0 67 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ether1_rgmii>; + clock-names = "ether"; clocks = <&sys_clk 7>; + reset-names = "ether"; resets = <&sys_rst 7>; phy-mode = "rgmii"; local-mac-address = [00 00 00 00 00 00]; + socionext,syscon-phy-mode = <&soc_glue 1>; mdio1: mdio { #address-cells = <1>; diff --git a/arch/arm64/boot/dts/sprd/sc2731.dtsi b/arch/arm64/boot/dts/sprd/sc2731.dtsi index 4331006185bf..98d3b4fdb9ad 100644 --- a/arch/arm64/boot/dts/sprd/sc2731.dtsi +++ b/arch/arm64/boot/dts/sprd/sc2731.dtsi @@ -24,6 +24,17 @@ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; }; + pmic_eic: gpio@300 { + compatible = "sprd,sc27xx-eic"; + reg = <0x300>; + interrupt-parent = <&sc2731_pmic>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + regulators { compatible = "sprd,sc27xx-regulator"; diff --git a/arch/arm64/boot/dts/sprd/sc9860.dtsi b/arch/arm64/boot/dts/sprd/sc9860.dtsi index 5dbfb796d9f9..3f5160d2f130 100644 --- a/arch/arm64/boot/dts/sprd/sc9860.dtsi +++ b/arch/arm64/boot/dts/sprd/sc9860.dtsi @@ -7,6 +7,8 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> #include "whale2.dtsi" / { @@ -326,7 +328,7 @@ reg = <4>; soc_funnel_in_port1: endpoint { slave-mode; - remote-endpioint = + remote-endpoint = <&stm_out_port>; }; }; @@ -679,5 +681,33 @@ }; }; }; + + gpio-keys { + compatible = "gpio-keys"; + + key-volumedown { + label = "Volume Down Key"; + linux,code = <KEY_VOLUMEDOWN>; + gpios = <&eic_debounce 2 GPIO_ACTIVE_LOW>; + debounce-interval = <2>; + wakeup-source; + }; + + key-volumeup { + label = "Volume Up Key"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pmic_eic 10 GPIO_ACTIVE_HIGH>; + debounce-interval = <2>; + wakeup-source; + }; + + key-power { + label = "Power Key"; + linux,code = <KEY_POWER>; + gpios = <&pmic_eic 1 GPIO_ACTIVE_HIGH>; + debounce-interval = <2>; + wakeup-source; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/sprd/whale2.dtsi b/arch/arm64/boot/dts/sprd/whale2.dtsi index 66a881e6da92..e9db9108f3c0 100644 --- a/arch/arm64/boot/dts/sprd/whale2.dtsi +++ b/arch/arm64/boot/dts/sprd/whale2.dtsi @@ -154,6 +154,56 @@ clocks = <&aon_gate CLK_SPLK_EB>; }; + eic_debounce: gpio@40210000 { + compatible = "sprd,sc9860-eic-debounce"; + reg = <0 0x40210000 0 0x80>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + }; + + eic_latch: gpio@40210080 { + compatible = "sprd,sc9860-eic-latch"; + reg = <0 0x40210080 0 0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + }; + + eic_async: gpio@402100a0 { + compatible = "sprd,sc9860-eic-async"; + reg = <0 0x402100a0 0 0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + }; + + eic_sync: gpio@402100c0 { + compatible = "sprd,sc9860-eic-sync"; + reg = <0 0x402100c0 0 0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + }; + + ap_gpio: gpio@40280000 { + compatible = "sprd,sc9860-gpio"; + reg = <0 0x40280000 0 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + }; + pin_controller: pinctrl@402a0000 { compatible = "sprd,sc9860-pinctrl"; reg = <0 0x402a0000 0 0x10000>; @@ -164,8 +214,9 @@ reg = <0 0x40310000 0 0x1000>; interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; timeout-sec = <12>; - clock-names = "enable"; - clocks = <&aon_gate CLK_APCPU_WDG_EB>; + clock-names = "enable", "rtc_enable"; + clocks = <&aon_gate CLK_APCPU_WDG_EB>, + <&aon_gate CLK_AP_WDG_RTC_EB>; }; }; diff --git a/arch/arm64/boot/dts/synaptics/Makefile b/arch/arm64/boot/dts/synaptics/Makefile new file mode 100644 index 000000000000..de71ddda6835 --- /dev/null +++ b/arch/arm64/boot/dts/synaptics/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 +# Berlin SoC Family +dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-dmp.dtb +dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-stb.dtb diff --git a/arch/arm64/boot/dts/synaptics/berlin4ct-dmp.dts b/arch/arm64/boot/dts/synaptics/berlin4ct-dmp.dts new file mode 100644 index 000000000000..c64a179ebbb7 --- /dev/null +++ b/arch/arm64/boot/dts/synaptics/berlin4ct-dmp.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2015 Marvell Technology Group Ltd. + * + * Author: Jisheng Zhang <jszhang@marvell.com> + */ + +/dts-v1/; + +#include "berlin4ct.dtsi" + +/ { + model = "Marvell BG4CT DMP board"; + compatible = "marvell,berlin4ct-dmp", "marvell,berlin4ct", "marvell,berlin"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@1000000 { + device_type = "memory"; + /* the first 16MB is for firmwares' usage */ + reg = <0 0x01000000 0 0x7f000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/synaptics/berlin4ct-stb.dts b/arch/arm64/boot/dts/synaptics/berlin4ct-stb.dts new file mode 100644 index 000000000000..277dccfa05cb --- /dev/null +++ b/arch/arm64/boot/dts/synaptics/berlin4ct-stb.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2015 Marvell Technology Group Ltd. + * + * Author: Jisheng Zhang <jszhang@marvell.com> + */ + +/dts-v1/; + +#include "berlin4ct.dtsi" + +/ { + model = "Marvell BG4CT STB board"; + compatible = "marvell,berlin4ct-stb", "marvell,berlin4ct", "marvell,berlin"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@1000000 { + device_type = "memory"; + /* the first 16MB is for firmwares' usage */ + reg = <0 0x01000000 0 0x7f000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi b/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi index d2f88b92d8e2..216767e2edf6 100644 --- a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi +++ b/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) /* * Copyright (C) 2015 Marvell Technology Group Ltd. * * Author: Jisheng Zhang <jszhang@marvell.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/interrupt-controller/arm-gic.h> |