diff options
| author | Ondrej Zary | 2023-10-05 22:55:58 +0200 |
|---|---|---|
| committer | Damien Le Moal | 2023-10-10 14:42:22 +0900 |
| commit | f343e578fef99a69b3322aca38b94a6d8ded2ce7 (patch) | |
| tree | 07edeb96f226516ea0cb2053683c8a3edde6d49c /drivers/ata | |
| parent | d2302427c12277929c9f390adeda19fbf403c0bb (diff) | |
ata: pata_parport: add custom version of wait_after_reset
Some parallel adapters (e.g. EXP Computer MC-1285B EPP Cable) return
bogus values when there's no master device present. This can cause
reset to fail, preventing the lone slave device (such as EXP Computer
CD-865) from working.
Add custom version of wait_after_reset that ignores master failure when
a slave device is present. The custom version is also needed because
the generic ata_sff_wait_after_reset uses direct port I/O for slave
device detection.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Diffstat (limited to 'drivers/ata')
| -rw-r--r-- | drivers/ata/pata_parport/pata_parport.c | 68 |
1 files changed, 67 insertions, 1 deletions
diff --git a/drivers/ata/pata_parport/pata_parport.c b/drivers/ata/pata_parport/pata_parport.c index cf87bbb52f1f..a7adfdcb5e27 100644 --- a/drivers/ata/pata_parport/pata_parport.c +++ b/drivers/ata/pata_parport/pata_parport.c @@ -80,6 +80,72 @@ static bool pata_parport_devchk(struct ata_port *ap, unsigned int device) return (nsect == 0x55) && (lbal == 0xaa); } +static int pata_parport_wait_after_reset(struct ata_link *link, + unsigned int devmask, + unsigned long deadline) +{ + struct ata_port *ap = link->ap; + struct pi_adapter *pi = ap->host->private_data; + unsigned int dev0 = devmask & (1 << 0); + unsigned int dev1 = devmask & (1 << 1); + int rc, ret = 0; + + ata_msleep(ap, ATA_WAIT_AFTER_RESET); + + /* always check readiness of the master device */ + rc = ata_sff_wait_ready(link, deadline); + if (rc) { + /* + * some adapters return bogus values if master device is not + * present, so don't abort now if a slave device is present + */ + if (!dev1) + return rc; + ret = -ENODEV; + } + + /* + * if device 1 was found in ata_devchk, wait for register + * access briefly, then wait for BSY to clear. + */ + if (dev1) { + int i; + + pata_parport_dev_select(ap, 1); + + /* + * Wait for register access. Some ATAPI devices fail + * to set nsect/lbal after reset, so don't waste too + * much time on it. We're gonna wait for !BSY anyway. + */ + for (i = 0; i < 2; i++) { + u8 nsect, lbal; + + nsect = pi->proto->read_regr(pi, 0, ATA_REG_NSECT); + lbal = pi->proto->read_regr(pi, 0, ATA_REG_LBAL); + if (nsect == 1 && lbal == 1) + break; + /* give drive a breather */ + ata_msleep(ap, 50); + } + + rc = ata_sff_wait_ready(link, deadline); + if (rc) { + if (rc != -ENODEV) + return rc; + ret = rc; + } + } + + pata_parport_dev_select(ap, 0); + if (dev1) + pata_parport_dev_select(ap, 1); + if (dev0) + pata_parport_dev_select(ap, 0); + + return ret; +} + static int pata_parport_bus_softreset(struct ata_port *ap, unsigned int devmask, unsigned long deadline) { @@ -94,7 +160,7 @@ static int pata_parport_bus_softreset(struct ata_port *ap, unsigned int devmask, ap->last_ctl = ap->ctl; /* wait the port to become ready */ - return ata_sff_wait_after_reset(&ap->link, devmask, deadline); + return pata_parport_wait_after_reset(&ap->link, devmask, deadline); } static int pata_parport_softreset(struct ata_link *link, unsigned int *classes, |