diff options
author | Rafael J. Wysocki | 2017-04-26 23:23:03 +0200 |
---|---|---|
committer | Rafael J. Wysocki | 2017-05-05 22:54:28 +0200 |
commit | eed4d47efe9508b855b09754cf6de4325d8a2f0d (patch) | |
tree | a5116bd74fa697a1601dff6db711022e82a55fde /drivers/base | |
parent | 8a537ece3d946227e4afa81eae0e43fa47439c7d (diff) |
ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle
The ACPI SCI (System Control Interrupt) is set up as a wakeup IRQ
during suspend-to-idle transitions and, consequently, any events
signaled through it wake up the system from that state. However,
on some systems some of the events signaled via the ACPI SCI while
suspended to idle should not cause the system to wake up. In fact,
quite often they should just be discarded.
Arguably, systems should not resume entirely on such events, but in
order to decide which events really should cause the system to resume
and which are spurious, it is necessary to resume up to the point
when ACPI SCIs are actually handled and processed, which is after
executing dpm_resume_noirq() in the system resume path.
For this reasons, add a loop around freeze_enter() in which the
platforms can process events signaled via multiplexed IRQ lines
like the ACPI SCI and add suspend-to-idle hooks that can be
used for this purpose to struct platform_freeze_ops.
In the ACPI case, the ->wake hook is used for checking if the SCI
has triggered while suspended and deferring the interrupt-induced
system wakeup until the events signaled through it are actually
processed sufficiently to decide whether or not the system should
resume. In turn, the ->sync hook allows all of the relevant event
queues to be flushed so as to prevent events from being missed due
to race conditions.
In addition to that, some ACPI code processing wakeup events needs
to be modified to use the "hard" version of wakeup triggers, so that
it will cause a system resume to happen on device-induced wakeup
events even if the "soft" mechanism to prevent the system from
suspending is not enabled (that also helps to catch device-induced
wakeup events occurring during suspend transitions in progress).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Diffstat (limited to 'drivers/base')
-rw-r--r-- | drivers/base/power/main.c | 5 | ||||
-rw-r--r-- | drivers/base/power/wakeup.c | 18 |
2 files changed, 12 insertions, 11 deletions
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index 9faee1c893e5..e987a6f55d36 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -1091,11 +1091,6 @@ static int __device_suspend_noirq(struct device *dev, pm_message_t state, bool a if (async_error) goto Complete; - if (pm_wakeup_pending()) { - async_error = -EBUSY; - goto Complete; - } - if (dev->power.syscore || dev->power.direct_complete) goto Complete; diff --git a/drivers/base/power/wakeup.c b/drivers/base/power/wakeup.c index 84c41c98d6fc..f62082fdd670 100644 --- a/drivers/base/power/wakeup.c +++ b/drivers/base/power/wakeup.c @@ -28,8 +28,8 @@ bool events_check_enabled __read_mostly; /* First wakeup IRQ seen by the kernel in the last cycle. */ unsigned int pm_wakeup_irq __read_mostly; -/* If set and the system is suspending, terminate the suspend. */ -static bool pm_abort_suspend __read_mostly; +/* If greater than 0 and the system is suspending, terminate the suspend. */ +static atomic_t pm_abort_suspend __read_mostly; /* * Combined counters of registered wakeup events and wakeup events in progress. @@ -856,20 +856,26 @@ bool pm_wakeup_pending(void) pm_print_active_wakeup_sources(); } - return ret || pm_abort_suspend; + return ret || atomic_read(&pm_abort_suspend) > 0; } void pm_system_wakeup(void) { - pm_abort_suspend = true; + atomic_inc(&pm_abort_suspend); freeze_wake(); } EXPORT_SYMBOL_GPL(pm_system_wakeup); -void pm_wakeup_clear(void) +void pm_system_cancel_wakeup(void) +{ + atomic_dec(&pm_abort_suspend); +} + +void pm_wakeup_clear(bool reset) { - pm_abort_suspend = false; pm_wakeup_irq = 0; + if (reset) + atomic_set(&pm_abort_suspend, 0); } void pm_system_irq_wakeup(unsigned int irq_number) |